| # |
| # Copyright (c) 2016, Alliance for Open Media. All rights reserved |
| # |
| # This source code is subject to the terms of the BSD 2 Clause License and the |
| # Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License was |
| # not distributed with this source code in the LICENSE file, you can obtain it |
| # at www.aomedia.org/license/software. If the Alliance for Open Media Patent |
| # License 1.0 was not distributed with this source code in the PATENTS file, you |
| # can obtain it at www.aomedia.org/license/patent. |
| |
| include("${AOM_ROOT}/build/cmake/util.cmake") |
| |
| # This file sets default values for libaom configuration variables. All libaom |
| # config variables are added to the CMake variable cache via the macros provided |
| # in util.cmake. |
| |
| # |
| # The variables in this section of the file are detected at configuration time, |
| # but can be overridden via the use of CONFIG_* and ENABLE_* values also defined |
| # in this file. |
| # |
| |
| set_aom_detect_var(INLINE "" STRING "Sets INLINE value for current target.") |
| |
| # CPUs. |
| set_aom_detect_var(ARCH_ARM 0 NUMBER "Enables ARM architecture.") |
| set_aom_detect_var(ARCH_MIPS 0 NUMBER "Enables MIPS architecture.") |
| set_aom_detect_var(ARCH_PPC 0 NUMBER "Enables PPC architecture.") |
| set_aom_detect_var(ARCH_X86 0 NUMBER "Enables X86 architecture.") |
| set_aom_detect_var(ARCH_X86_64 0 NUMBER "Enables X86_64 architecture.") |
| |
| # ARM feature flags. |
| set_aom_detect_var(HAVE_NEON 0 NUMBER "Enables NEON intrinsics optimizations.") |
| |
| # MIPS feature flags. |
| set_aom_detect_var(HAVE_DSPR2 0 NUMBER "Enables DSPR2 optimizations.") |
| set_aom_detect_var(HAVE_MIPS32 0 NUMBER "Enables MIPS32 optimizations.") |
| set_aom_detect_var(HAVE_MIPS64 0 NUMBER "Enables MIPS64 optimizations. ") |
| set_aom_detect_var(HAVE_MSA 0 NUMBER "Enables MSA optimizations.") |
| |
| # PPC feature flags. |
| set_aom_detect_var(HAVE_VSX 0 NUMBER "Enables VSX optimizations.") |
| |
| # x86/x86_64 feature flags. |
| set_aom_detect_var(HAVE_AVX 0 NUMBER "Enables AVX optimizations.") |
| set_aom_detect_var(HAVE_AVX2 0 NUMBER "Enables AVX2 optimizations.") |
| set_aom_detect_var(HAVE_MMX 0 NUMBER "Enables MMX optimizations. ") |
| set_aom_detect_var(HAVE_SSE 0 NUMBER "Enables SSE optimizations.") |
| set_aom_detect_var(HAVE_SSE2 0 NUMBER "Enables SSE2 optimizations.") |
| set_aom_detect_var(HAVE_SSE3 0 NUMBER "Enables SSE3 optimizations.") |
| set_aom_detect_var(HAVE_SSE4_1 0 NUMBER "Enables SSE 4.1 optimizations.") |
| set_aom_detect_var(HAVE_SSE4_2 0 NUMBER "Enables SSE 4.2 optimizations.") |
| set_aom_detect_var(HAVE_SSSE3 0 NUMBER "Enables SSSE3 optimizations.") |
| |
| # Flags describing the build environment. |
| set_aom_detect_var(HAVE_FEXCEPT 0 NUMBER |
| "Internal flag, GNU fenv.h present for target.") |
| set_aom_detect_var(HAVE_PTHREAD_H 0 NUMBER |
| "Internal flag, target pthread support.") |
| set_aom_detect_var(HAVE_UNISTD_H 0 NUMBER |
| "Internal flag, unistd.h present for target.") |
| set_aom_detect_var(HAVE_WXWIDGETS 0 NUMBER "WxWidgets present.") |
| |
| # |
| # Variables in this section can be set from the CMake command line or from |
| # within the CMake GUI. The variables control libaom features. |
| # |
| |
| # Build configuration flags. |
| set_aom_config_var(CONFIG_AV1_DECODER 1 NUMBER "Enable AV1 decoder.") |
| set_aom_config_var(CONFIG_AV1_ENCODER 1 NUMBER "Enable AV1 encoder.") |
| set_aom_config_var(CONFIG_BIG_ENDIAN 0 NUMBER "Internal flag.") |
| set_aom_config_var(CONFIG_GCC 0 NUMBER "Building with GCC (detect).") |
| set_aom_config_var(CONFIG_GCOV 0 NUMBER "Enable gcov support.") |
| set_aom_config_var(CONFIG_GPROF 0 NUMBER "Enable gprof support.") |
| set_aom_config_var(CONFIG_LIBYUV 1 NUMBER |
| "Enables libyuv scaling/conversion support.") |
| |
| set_aom_config_var(CONFIG_MULTITHREAD 1 NUMBER "Multithread support.") |
| set_aom_config_var(CONFIG_OS_SUPPORT 0 NUMBER "Internal flag.") |
| set_aom_config_var(CONFIG_PIC 0 NUMBER "Build with PIC enabled.") |
| set_aom_config_var(CONFIG_RUNTIME_CPU_DETECT 1 NUMBER |
| "Runtime CPU detection support.") |
| set_aom_config_var(CONFIG_SHARED 0 NUMBER "Build shared libs.") |
| set_aom_config_var(CONFIG_STATIC 1 NUMBER "Build static libs.") |
| set_aom_config_var(CONFIG_WEBM_IO 1 NUMBER "Enables WebM support.") |
| |
| # Debugging flags. |
| set_aom_config_var(CONFIG_BITSTREAM_DEBUG 0 NUMBER "Bitstream debugging flag.") |
| set_aom_config_var(CONFIG_DEBUG 0 NUMBER "Debug build flag.") |
| set_aom_config_var(CONFIG_MISMATCH_DEBUG 0 NUMBER "Mismatch debugging flag.") |
| |
| # AV1 feature flags. |
| set_aom_config_var(CONFIG_ACCOUNTING 0 NUMBER "Enables bit accounting.") |
| set_aom_config_var(CONFIG_ANALYZER 0 NUMBER "Enables bit stream analyzer.") |
| set_aom_config_var(CONFIG_COEFFICIENT_RANGE_CHECKING 0 NUMBER |
| "Coefficient range check.") |
| set_aom_config_var(CONFIG_DENOISE 0 NUMBER |
| "Denoise/noise modeling support in encoder.") |
| set_aom_config_var(CONFIG_FILEOPTIONS 1 NUMBER |
| "Enables encoder config file support.") |
| set_aom_config_var(CONFIG_FIX_GF_LENGTH 1 NUMBER |
| "Fix the GF length if possible") |
| set_aom_config_var(CONFIG_INSPECTION 0 NUMBER "Enables bitstream inspection.") |
| set_aom_config_var(CONFIG_INTERNAL_STATS 0 NUMBER |
| "Enables internal encoder stats.") |
| set_aom_config_var(CONFIG_LOWBITDEPTH 0 NUMBER |
| "Enables 8-bit optimized pipeline.") |
| set_aom_config_var(CONFIG_MAX_DECODE_PROFILE 2 NUMBER |
| "Max profile to support decoding.") |
| set_aom_config_var(CONFIG_NORMAL_TILE_MODE 0 NUMBER |
| "Only enables normal tile mode.") |
| set_aom_config_var( |
| CONFIG_REDUCED_ENCODER_BORDER 0 NUMBER |
| "Enable reduced border extention for encoder. \ |
| Disables superres and resize support." |
| ) |
| set_aom_config_var(CONFIG_SIZE_LIMIT 0 NUMBER "Limit max decode width/height.") |
| set_aom_config_var(CONFIG_SPATIAL_RESAMPLING 1 NUMBER "Spatial resampling.") |
| set_aom_config_var(DECODE_HEIGHT_LIMIT 0 NUMBER "Set limit for decode height.") |
| set_aom_config_var(DECODE_WIDTH_LIMIT 0 NUMBER "Set limit for decode width.") |
| |
| # AV1 experiment flags. |
| set_aom_config_var(CONFIG_COLLECT_INTER_MODE_RD_STATS 1 NUMBER |
| "AV1 experiment flag.") |
| set_aom_config_var(CONFIG_COLLECT_RD_STATS 0 NUMBER "AV1 experiment flag.") |
| set_aom_config_var(CONFIG_DIST_8X8 0 NUMBER "AV1 experiment flag.") |
| set_aom_config_var(CONFIG_ENTROPY_STATS 0 NUMBER "AV1 experiment flag.") |
| set_aom_config_var(CONFIG_FP_MB_STATS 0 NUMBER "AV1 experiment flag.") |
| set_aom_config_var(CONFIG_INTER_STATS_ONLY 0 NUMBER "AV1 experiment flag.") |
| set_aom_config_var(CONFIG_RD_DEBUG 0 NUMBER "AV1 experiment flag.") |
| set_aom_config_var(CONFIG_2PASS_PARTITION_SEARCH_LVL 1 NUMBER |
| "AV1 experiment flag.") |
| |
| # |
| # Variables in this section control optional features of the build system. |
| # |
| set_aom_option_var(ENABLE_CCACHE "Enable ccache support." OFF) |
| set_aom_option_var(ENABLE_DECODE_PERF_TESTS "Enables decoder performance tests" |
| OFF) |
| set_aom_option_var(ENABLE_DISTCC "Enable distcc support." OFF) |
| set_aom_option_var(ENABLE_DOCS |
| "Enable documentation generation (doxygen required)." ON) |
| set_aom_option_var(ENABLE_ENCODE_PERF_TESTS "Enables encoder performance tests" |
| OFF) |
| set_aom_option_var(ENABLE_EXAMPLES "Enables build of example code." ON) |
| set_aom_option_var(ENABLE_GOMA "Enable goma support." OFF) |
| set_aom_option_var( |
| ENABLE_IDE_TEST_HOSTING |
| "Enables running tests within IDEs like Visual Studio and Xcode." OFF) |
| set_aom_option_var(ENABLE_NASM "Use nasm instead of yasm for x86 assembly." OFF) |
| set_aom_option_var(ENABLE_TESTDATA "Enables unit test data download targets." |
| ON) |
| set_aom_option_var(ENABLE_TESTS "Enables unit tests." ON) |
| set_aom_option_var(ENABLE_TOOLS "Enable applications in tools sub directory." |
| ON) |
| set_aom_option_var(ENABLE_WERROR "Converts warnings to errors at compile time." |
| OFF) |
| |
| # ARM assembly/intrinsics flags. |
| set_aom_option_var(ENABLE_NEON "Enables NEON optimizations on ARM targets." ON) |
| |
| # MIPS assembly/intrinsics flags. |
| set_aom_option_var(ENABLE_DSPR2 "Enables DSPR2 optimizations on MIPS targets." |
| OFF) |
| set_aom_option_var(ENABLE_MSA "Enables MSA optimizations on MIPS targets." OFF) |
| |
| # VSX intrinsics flags. |
| set_aom_option_var(ENABLE_VSX "Enables VSX optimizations on PowerPC targets." |
| ON) |
| |
| # x86/x86_64 assembly/intrinsics flags. |
| set_aom_option_var(ENABLE_MMX |
| "Enables MMX optimizations on x86/x86_64 targets." ON) |
| set_aom_option_var(ENABLE_SSE |
| "Enables SSE optimizations on x86/x86_64 targets." ON) |
| set_aom_option_var(ENABLE_SSE2 |
| "Enables SSE2 optimizations on x86/x86_64 targets." ON) |
| set_aom_option_var(ENABLE_SSE3 |
| "Enables SSE3 optimizations on x86/x86_64 targets." ON) |
| set_aom_option_var(ENABLE_SSSE3 |
| "Enables SSSE3 optimizations on x86/x86_64 targets." ON) |
| set_aom_option_var(ENABLE_SSE4_1 |
| "Enables SSE4_1 optimizations on x86/x86_64 targets." ON) |
| set_aom_option_var(ENABLE_SSE4_2 |
| "Enables SSE4_2 optimizations on x86/x86_64 targets." ON) |
| set_aom_option_var(ENABLE_AVX |
| "Enables AVX optimizations on x86/x86_64 targets." ON) |
| set_aom_option_var(ENABLE_AVX2 |
| "Enables AVX2 optimizations on x86/x86_64 targets." ON) |
