blob: bf2130341ae91aaf99c8d92e6a98dfb90da33ebd [file] [log] [blame]
/*
* Copyright (c) 2016, Alliance for Open Media. All rights reserved
*
* This source code is subject to the terms of the BSD 2 Clause License and
* the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License
* was not distributed with this source code in the LICENSE file, you can
* obtain it at www.aomedia.org/license/software. If the Alliance for Open
* Media Patent License 1.0 was not distributed with this source code in the
* PATENTS file, you can obtain it at www.aomedia.org/license/patent.
*/
#ifndef AOM_AV1_COMMON_RESTORATION_H_
#define AOM_AV1_COMMON_RESTORATION_H_
#include "aom_ports/mem.h"
#include "config/aom_config.h"
#include "av1/common/blockd.h"
#include "av1/common/enums.h"
#ifdef __cplusplus
extern "C" {
#endif
/*! @file */
/*!\cond */
// Border for Loop restoration buffer
#define AOM_RESTORATION_FRAME_BORDER 32
#define CLIP(x, lo, hi) ((x) < (lo) ? (lo) : (x) > (hi) ? (hi) : (x))
#define RINT(x) ((x) < 0 ? (int)((x)-0.5) : (int)((x) + 0.5))
#define RESTORATION_PROC_UNIT_SIZE 64
// Filter tile grid offset upwards compared to the superblock grid
#define RESTORATION_UNIT_OFFSET 8
#define SGRPROJ_BORDER_VERT 3 // Vertical border used for Sgr
#define SGRPROJ_BORDER_HORZ 3 // Horizontal border used for Sgr
#define WIENER_BORDER_VERT 2 // Vertical border used for Wiener
#define WIENER_HALFWIN 3
#define WIENER_BORDER_HORZ (WIENER_HALFWIN) // Horizontal border for Wiener
// RESTORATION_BORDER_VERT determines line buffer requirement for LR.
// Should be set at the max of SGRPROJ_BORDER_VERT and WIENER_BORDER_VERT.
// Note the line buffer needed is twice the value of this macro.
#if SGRPROJ_BORDER_VERT >= WIENER_BORDER_VERT
#define RESTORATION_BORDER_VERT (SGRPROJ_BORDER_VERT)
#else
#define RESTORATION_BORDER_VERT (WIENER_BORDER_VERT)
#endif // SGRPROJ_BORDER_VERT >= WIENER_BORDER_VERT
#if SGRPROJ_BORDER_HORZ >= WIENER_BORDER_HORZ
#define RESTORATION_BORDER_HORZ (SGRPROJ_BORDER_HORZ)
#else
#define RESTORATION_BORDER_HORZ (WIENER_BORDER_HORZ)
#endif // SGRPROJ_BORDER_VERT >= WIENER_BORDER_VERT
// How many border pixels do we need for each processing unit?
#define RESTORATION_BORDER 3
// How many rows of deblocked pixels do we save above/below each processing
// stripe?
#define RESTORATION_CTX_VERT 2
// Additional pixels to the left and right in above/below buffers
// It is RESTORATION_BORDER_HORZ rounded up to get nicer buffer alignment
#define RESTORATION_EXTRA_HORZ 4
// Pad up to 20 more (may be much less is needed)
#define RESTORATION_PADDING 20
#define RESTORATION_PROC_UNIT_PELS \
((RESTORATION_PROC_UNIT_SIZE + RESTORATION_BORDER_HORZ * 2 + \
RESTORATION_PADDING) * \
(RESTORATION_PROC_UNIT_SIZE + RESTORATION_BORDER_VERT * 2 + \
RESTORATION_PADDING))
#define RESTORATION_UNITSIZE_MAX 256
#define RESTORATION_UNITPELS_HORZ_MAX \
(RESTORATION_UNITSIZE_MAX * 3 / 2 + 2 * RESTORATION_BORDER_HORZ + 16)
#define RESTORATION_UNITPELS_VERT_MAX \
((RESTORATION_UNITSIZE_MAX * 3 / 2 + 2 * RESTORATION_BORDER_VERT + \
RESTORATION_UNIT_OFFSET))
#define RESTORATION_UNITPELS_MAX \
(RESTORATION_UNITPELS_HORZ_MAX * RESTORATION_UNITPELS_VERT_MAX)
// Two 32-bit buffers needed for the restored versions from two filters
// TODO(debargha, rupert): Refactor to not need the large tilesize to be stored
// on the decoder side.
#define SGRPROJ_TMPBUF_SIZE (RESTORATION_UNITPELS_MAX * 2 * sizeof(int32_t))
#define SGRPROJ_EXTBUF_SIZE (0)
#define SGRPROJ_PARAMS_BITS 4
#define SGRPROJ_PARAMS (1 << SGRPROJ_PARAMS_BITS)
// Precision bits for projection
#define SGRPROJ_PRJ_BITS 7
// Restoration precision bits generated higher than source before projection
#define SGRPROJ_RST_BITS 4
// Internal precision bits for core selfguided_restoration
#define SGRPROJ_SGR_BITS 8
#define SGRPROJ_SGR (1 << SGRPROJ_SGR_BITS)
#define SGRPROJ_PRJ_MIN0 (-(1 << SGRPROJ_PRJ_BITS) * 3 / 4)
#define SGRPROJ_PRJ_MAX0 (SGRPROJ_PRJ_MIN0 + (1 << SGRPROJ_PRJ_BITS) - 1)
#define SGRPROJ_PRJ_MIN1 (-(1 << SGRPROJ_PRJ_BITS) / 4)
#define SGRPROJ_PRJ_MAX1 (SGRPROJ_PRJ_MIN1 + (1 << SGRPROJ_PRJ_BITS) - 1)
#define SGRPROJ_PRJ_SUBEXP_K 4
#define SGRPROJ_BITS (SGRPROJ_PRJ_BITS * 2 + SGRPROJ_PARAMS_BITS)
#define MAX_RADIUS 2 // Only 1, 2, 3 allowed
#define MAX_NELEM ((2 * MAX_RADIUS + 1) * (2 * MAX_RADIUS + 1))
#define SGRPROJ_MTABLE_BITS 20
#define SGRPROJ_RECIP_BITS 12
#define WIENER_HALFWIN1 (WIENER_HALFWIN + 1)
#define WIENER_WIN (2 * WIENER_HALFWIN + 1)
#define WIENER_WIN2 ((WIENER_WIN) * (WIENER_WIN))
#define WIENER_TMPBUF_SIZE (0)
#define WIENER_EXTBUF_SIZE (0)
// If WIENER_WIN_CHROMA == WIENER_WIN - 2, that implies 5x5 filters are used for
// chroma. To use 7x7 for chroma set WIENER_WIN_CHROMA to WIENER_WIN.
#define WIENER_WIN_CHROMA (WIENER_WIN - 2)
#define WIENER_WIN_REDUCED (WIENER_WIN - 2)
#define WIENER_WIN2_CHROMA ((WIENER_WIN_CHROMA) * (WIENER_WIN_CHROMA))
#define WIENER_STATS_DOWNSAMPLE_FACTOR 4
#define WIENER_FILT_PREC_BITS 7
#define WIENER_FILT_STEP (1 << WIENER_FILT_PREC_BITS)
// Central values for the taps
#define WIENER_FILT_TAP0_MIDV (3)
#define WIENER_FILT_TAP1_MIDV (-7)
#define WIENER_FILT_TAP2_MIDV (15)
#define WIENER_FILT_TAP3_MIDV \
(WIENER_FILT_STEP - 2 * (WIENER_FILT_TAP0_MIDV + WIENER_FILT_TAP1_MIDV + \
WIENER_FILT_TAP2_MIDV))
#define WIENER_FILT_TAP0_BITS 4
#define WIENER_FILT_TAP1_BITS 5
#define WIENER_FILT_TAP2_BITS 6
#define WIENER_FILT_BITS \
((WIENER_FILT_TAP0_BITS + WIENER_FILT_TAP1_BITS + WIENER_FILT_TAP2_BITS) * 2)
#define WIENER_FILT_TAP0_MINV \
(WIENER_FILT_TAP0_MIDV - (1 << WIENER_FILT_TAP0_BITS) / 2)
#define WIENER_FILT_TAP1_MINV \
(WIENER_FILT_TAP1_MIDV - (1 << WIENER_FILT_TAP1_BITS) / 2)
#define WIENER_FILT_TAP2_MINV \
(WIENER_FILT_TAP2_MIDV - (1 << WIENER_FILT_TAP2_BITS) / 2)
#define WIENER_FILT_TAP0_MAXV \
(WIENER_FILT_TAP0_MIDV - 1 + (1 << WIENER_FILT_TAP0_BITS) / 2)
#define WIENER_FILT_TAP1_MAXV \
(WIENER_FILT_TAP1_MIDV - 1 + (1 << WIENER_FILT_TAP1_BITS) / 2)
#define WIENER_FILT_TAP2_MAXV \
(WIENER_FILT_TAP2_MIDV - 1 + (1 << WIENER_FILT_TAP2_BITS) / 2)
#define WIENER_FILT_TAP0_SUBEXP_K 1
#define WIENER_FILT_TAP1_SUBEXP_K 2
#define WIENER_FILT_TAP2_SUBEXP_K 3
// Max of SGRPROJ_TMPBUF_SIZE, DOMAINTXFMRF_TMPBUF_SIZE, WIENER_TMPBUF_SIZE
#define RESTORATION_TMPBUF_SIZE (SGRPROJ_TMPBUF_SIZE)
// Max of SGRPROJ_EXTBUF_SIZE, WIENER_EXTBUF_SIZE
#define RESTORATION_EXTBUF_SIZE (WIENER_EXTBUF_SIZE)
// Check the assumptions of the existing code
#if SUBPEL_TAPS != WIENER_WIN + 1
#error "Wiener filter currently only works if SUBPEL_TAPS == WIENER_WIN + 1"
#endif
#if WIENER_FILT_PREC_BITS != 7
#error "Wiener filter currently only works if WIENER_FILT_PREC_BITS == 7"
#endif
#define LR_TILE_ROW 0
#define LR_TILE_COL 0
#define LR_TILE_COLS 1
typedef struct {
int r[2]; // radii
int s[2]; // sgr parameters for r[0] and r[1], based on GenSgrprojVtable()
} sgr_params_type;
/*!\endcond */
/*!\brief Parameters related to Restoration Unit Info */
typedef struct {
/*!
* restoration type
*/
RestorationType restoration_type;
/*!
* Wiener filter parameters if restoration_type indicates Wiener
*/
WienerInfo wiener_info;
/*!
* Sgrproj filter parameters if restoration_type indicates Sgrproj
*/
SgrprojInfo sgrproj_info;
} RestorationUnitInfo;
/*!\cond */
// A restoration line buffer needs space for two lines plus a horizontal filter
// margin of RESTORATION_EXTRA_HORZ on each side.
#define RESTORATION_LINEBUFFER_WIDTH \
(RESTORATION_UNITSIZE_MAX * 3 / 2 + 2 * RESTORATION_EXTRA_HORZ)
// Similarly, the column buffers (used when we're at a vertical tile edge
// that we can't filter across) need space for one processing unit's worth
// of pixels, plus the top/bottom border width
#define RESTORATION_COLBUFFER_HEIGHT \
(RESTORATION_PROC_UNIT_SIZE + 2 * RESTORATION_BORDER)
typedef struct {
// Temporary buffers to save/restore 3 lines above/below the restoration
// stripe.
uint16_t tmp_save_above[RESTORATION_BORDER][RESTORATION_LINEBUFFER_WIDTH];
uint16_t tmp_save_below[RESTORATION_BORDER][RESTORATION_LINEBUFFER_WIDTH];
} RestorationLineBuffers;
/*!\endcond */
/*!\brief Parameters related to Restoration Stripe boundaries */
typedef struct {
/*!
* stripe boundary above
*/
uint8_t *stripe_boundary_above;
/*!
* stripe boundary below
*/
uint8_t *stripe_boundary_below;
/*!
* strides for stripe boundaries above and below
*/
int stripe_boundary_stride;
/*!
* size of stripe boundaries above and below
*/
int stripe_boundary_size;
} RestorationStripeBoundaries;
/*!\brief Parameters related to Restoration Info */
typedef struct {
/*!
* Restoration type for frame
*/
RestorationType frame_restoration_type;
/*!
* Restoration unit size
*/
int restoration_unit_size;
/**
* \name Fields allocated and initialised by av1_alloc_restoration_struct.
* (horz_)units_per_tile give the number of restoration units in
* (one row of) the largest tile in the frame.
*/
/**@{*/
/*!
* Number of units per tile for the largest tile in the frame
*/
int units_per_tile;
/*!
* Number of vertical units per tile
*/
int vert_units_per_tile;
/*!
* Number of horizontal units per tile for the largest tile in the frame
*/
int horz_units_per_tile;
/**@}*/
/*!
* List of info for units in tile.
* The data in unit_info is laid out with units_per_tile entries for each
* tile, which have stride horz_units_per_tile.
* Even if there are tiles of different sizes, the data in unit_info is
* laid out as if all tiles are of full size.
*/
RestorationUnitInfo *unit_info;
/*!
* Restoration Stripe boundary info
*/
RestorationStripeBoundaries boundaries;
/*!
* Whether optimized lr can be used for speed.
* That includes cases of no cdef and no superres, or if fast trial runs
* are used on the encoder side.
*/
int optimized_lr;
} RestorationInfo;
/*!\cond */
static INLINE void set_default_sgrproj(SgrprojInfo *sgrproj_info) {
sgrproj_info->xqd[0] = (SGRPROJ_PRJ_MIN0 + SGRPROJ_PRJ_MAX0) / 2;
sgrproj_info->xqd[1] = (SGRPROJ_PRJ_MIN1 + SGRPROJ_PRJ_MAX1) / 2;
}
static INLINE void set_default_wiener(WienerInfo *wiener_info) {
wiener_info->vfilter[0] = wiener_info->hfilter[0] = WIENER_FILT_TAP0_MIDV;
wiener_info->vfilter[1] = wiener_info->hfilter[1] = WIENER_FILT_TAP1_MIDV;
wiener_info->vfilter[2] = wiener_info->hfilter[2] = WIENER_FILT_TAP2_MIDV;
wiener_info->vfilter[WIENER_HALFWIN] = wiener_info->hfilter[WIENER_HALFWIN] =
-2 *
(WIENER_FILT_TAP2_MIDV + WIENER_FILT_TAP1_MIDV + WIENER_FILT_TAP0_MIDV);
wiener_info->vfilter[4] = wiener_info->hfilter[4] = WIENER_FILT_TAP2_MIDV;
wiener_info->vfilter[5] = wiener_info->hfilter[5] = WIENER_FILT_TAP1_MIDV;
wiener_info->vfilter[6] = wiener_info->hfilter[6] = WIENER_FILT_TAP0_MIDV;
}
typedef struct {
int h_start, h_end, v_start, v_end;
} RestorationTileLimits;
typedef void (*rest_unit_visitor_t)(const RestorationTileLimits *limits,
const PixelRect *tile_rect,
int rest_unit_idx, void *priv,
int32_t *tmpbuf,
RestorationLineBuffers *rlbs);
typedef struct FilterFrameCtxt {
const RestorationInfo *rsi;
int tile_stripe0;
int ss_x, ss_y;
int highbd, bit_depth;
uint8_t *data8, *dst8;
int data_stride, dst_stride;
PixelRect tile_rect;
} FilterFrameCtxt;
typedef struct AV1LrStruct {
rest_unit_visitor_t on_rest_unit;
FilterFrameCtxt ctxt[MAX_MB_PLANE];
YV12_BUFFER_CONFIG *frame;
YV12_BUFFER_CONFIG *dst;
} AV1LrStruct;
extern const sgr_params_type av1_sgr_params[SGRPROJ_PARAMS];
extern int sgrproj_mtable[SGRPROJ_PARAMS][2];
extern const int32_t av1_x_by_xplus1[256];
extern const int32_t av1_one_by_x[MAX_NELEM];
void av1_alloc_restoration_struct(struct AV1Common *cm, RestorationInfo *rsi,
int is_uv);
void av1_free_restoration_struct(RestorationInfo *rst_info);
void av1_extend_frame(uint8_t *data, int width, int height, int stride,
int border_horz, int border_vert, int highbd);
void av1_decode_xq(const int *xqd, int *xq, const sgr_params_type *params);
/*!\endcond */
/*!\brief Function for applying loop restoration filter to a single unit.
*
* \ingroup in_loop_restoration
* This function applies the loop restoration filter to a single
* loop restoration unit.
*
* \param[in] limits Limits of the unit
* \param[in] rui The parameters to use for this unit and its
* coefficients
* \param[in] rsb Deblocked pixels to use for stripe boundaries
* \param[in] rlbs Space to use as a scratch buffer
* \param[in] tile_rect Limits of the tile containing this unit
* \param[in] tile_stripe0 Index of the first stripe in this tile
* \param[in] ss_x Horizontal subsampling for plane
* \param[in] ss_y Vertical subsampling for plane
* \param[in] highbd Whether high bitdepth pipeline is used
* \param[in] bit_depth Bit-depth of the video
* \param[in] data8 Frame data (pointing at the top-left corner of
* the frame, not the restoration unit).
* \param[in] stride Stride of \c data8
* \param[out] dst8 Buffer where the results will be written. Like
* \c data8, \c dst8 should point at the top-left
* corner of the frame
* \param[in] dst_stride Stride of \c dst8
* \param[in] tmpbuf Scratch buffer used by the sgrproj filter which
* should be at least SGRPROJ_TMPBUF_SIZE big.
* \param[in] optimized_lr Whether to use fast optimized Loop Restoration
*
* \remark Nothing is returned. Instead, the filtered unit is output in
* \c dst8 at the proper restoration unit offset.
*/
void av1_loop_restoration_filter_unit(
const RestorationTileLimits *limits, const RestorationUnitInfo *rui,
const RestorationStripeBoundaries *rsb, RestorationLineBuffers *rlbs,
const PixelRect *tile_rect, int tile_stripe0, int ss_x, int ss_y,
int highbd, int bit_depth, uint8_t *data8, int stride, uint8_t *dst8,
int dst_stride, int32_t *tmpbuf, int optimized_lr);
/*!\brief Function for applying loop restoration filter to a frame
*
* \ingroup in_loop_restoration
* This function applies the loop restoration filter to a frame.
*
* \param[in, out] frame Compressed frame buffer
* \param[in, out] cm Pointer to top level common structure
* \param[in] optimized_lr Whether to use fast optimized Loop Restoration
* \param[in] lr_ctxt Loop restoration context
*
* \remark Nothing is returned. Instead, the filtered frame is output in
* \c frame.
*/
void av1_loop_restoration_filter_frame(YV12_BUFFER_CONFIG *frame,
struct AV1Common *cm, int optimized_lr,
void *lr_ctxt);
/*!\cond */
void av1_loop_restoration_precal();
typedef void (*rest_tile_start_visitor_t)(int tile_row, int tile_col,
void *priv);
struct AV1LrSyncData;
typedef void (*sync_read_fn_t)(void *const lr_sync, int r, int c, int plane);
typedef void (*sync_write_fn_t)(void *const lr_sync, int r, int c,
const int sb_cols, int plane);
// Call on_rest_unit for each loop restoration unit in the plane.
void av1_foreach_rest_unit_in_plane(const struct AV1Common *cm, int plane,
rest_unit_visitor_t on_rest_unit,
void *priv, PixelRect *tile_rect,
int32_t *tmpbuf,
RestorationLineBuffers *rlbs);
// Return 1 iff the block at mi_row, mi_col with size bsize is a
// top-level superblock containing the top-left corner of at least one
// loop restoration unit.
//
// If the block is a top-level superblock, the function writes to
// *rcol0, *rcol1, *rrow0, *rrow1. The rectangle of restoration unit
// indices given by [*rcol0, *rcol1) x [*rrow0, *rrow1) are relative
// to the current tile, whose starting index is returned as
// *tile_tl_idx.
int av1_loop_restoration_corners_in_sb(const struct AV1Common *cm, int plane,
int mi_row, int mi_col, BLOCK_SIZE bsize,
int *rcol0, int *rcol1, int *rrow0,
int *rrow1);
void av1_loop_restoration_save_boundary_lines(const YV12_BUFFER_CONFIG *frame,
struct AV1Common *cm,
int after_cdef);
void av1_loop_restoration_filter_frame_init(AV1LrStruct *lr_ctxt,
YV12_BUFFER_CONFIG *frame,
struct AV1Common *cm,
int optimized_lr, int num_planes);
void av1_loop_restoration_copy_planes(AV1LrStruct *loop_rest_ctxt,
struct AV1Common *cm, int num_planes);
void av1_foreach_rest_unit_in_row(
RestorationTileLimits *limits, const PixelRect *tile_rect,
rest_unit_visitor_t on_rest_unit, int row_number, int unit_size,
int unit_idx0, int hunits_per_tile, int vunits_per_tile, int plane,
void *priv, int32_t *tmpbuf, RestorationLineBuffers *rlbs,
sync_read_fn_t on_sync_read, sync_write_fn_t on_sync_write,
struct AV1LrSyncData *const lr_sync);
PixelRect av1_whole_frame_rect(const struct AV1Common *cm, int is_uv);
int av1_lr_count_units_in_tile(int unit_size, int tile_size);
void av1_lr_sync_read_dummy(void *const lr_sync, int r, int c, int plane);
void av1_lr_sync_write_dummy(void *const lr_sync, int r, int c,
const int sb_cols, int plane);
/*!\endcond */
#ifdef __cplusplus
} // extern "C"
#endif
#endif // AOM_AV1_COMMON_RESTORATION_H_