| /* |
| * Copyright (c) 2016, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 2 Clause License and |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License |
| * was not distributed with this source code in the LICENSE file, you can |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open |
| * Media Patent License 1.0 was not distributed with this source code in the |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. |
| */ |
| |
| #include "./aom_dsp_rtcd.h" |
| #include "av1/common/filter.h" |
| #include "av1/common/scale.h" |
| #include "aom_dsp/aom_filter.h" |
| |
| // Note: Expect val to be in q4 precision |
| static INLINE int scaled_x(int val, const struct scale_factors *sf) { |
| const int off = (sf->x_scale_fp - (1 << REF_SCALE_SHIFT)) |
| << (SUBPEL_BITS - 1); |
| const int64_t tval = (int64_t)val * sf->x_scale_fp + off; |
| return (int)ROUND_POWER_OF_TWO_SIGNED_64(tval, |
| REF_SCALE_SHIFT - SCALE_EXTRA_BITS); |
| } |
| |
| // Note: Expect val to be in q4 precision |
| static INLINE int scaled_y(int val, const struct scale_factors *sf) { |
| const int off = (sf->y_scale_fp - (1 << REF_SCALE_SHIFT)) |
| << (SUBPEL_BITS - 1); |
| const int64_t tval = (int64_t)val * sf->y_scale_fp + off; |
| return (int)ROUND_POWER_OF_TWO_SIGNED_64(tval, |
| REF_SCALE_SHIFT - SCALE_EXTRA_BITS); |
| } |
| |
| // Note: Expect val to be in q4 precision |
| static int unscaled_value(int val, const struct scale_factors *sf) { |
| (void)sf; |
| return val << SCALE_EXTRA_BITS; |
| } |
| |
| static int get_fixed_point_scale_factor(int other_size, int this_size) { |
| // Calculate scaling factor once for each reference frame |
| // and use fixed point scaling factors in decoding and encoding routines. |
| // Hardware implementations can calculate scale factor in device driver |
| // and use multiplication and shifting on hardware instead of division. |
| return ((other_size << REF_SCALE_SHIFT) + this_size / 2) / this_size; |
| } |
| |
| static int get_coarse_point_scale_factor(int other_size, int this_size) { |
| // Calculate scaling factor once for each reference frame |
| // and use fixed point scaling factors in decoding and encoding routines. |
| // Hardware implementations can calculate scale factor in device driver |
| // and use multiplication and shifting on hardware instead of division. |
| return ((other_size << SCALE_SUBPEL_BITS) + this_size / 2) / this_size; |
| } |
| |
| // Note: x and y are integer precision, mvq4 is q4 precision. |
| MV32 av1_scale_mv(const MV *mvq4, int x, int y, |
| const struct scale_factors *sf) { |
| const int x_off_q4 = scaled_x(x << SUBPEL_BITS, sf); |
| const int y_off_q4 = scaled_y(y << SUBPEL_BITS, sf); |
| const MV32 res = { scaled_y((y << SUBPEL_BITS) + mvq4->row, sf) - y_off_q4, |
| scaled_x((x << SUBPEL_BITS) + mvq4->col, sf) - x_off_q4 }; |
| return res; |
| } |
| |
| #if CONFIG_HIGHBITDEPTH |
| void av1_setup_scale_factors_for_frame(struct scale_factors *sf, int other_w, |
| int other_h, int this_w, int this_h, |
| int use_highbd) { |
| #else |
| void av1_setup_scale_factors_for_frame(struct scale_factors *sf, int other_w, |
| int other_h, int this_w, int this_h) { |
| #endif |
| if (!valid_ref_frame_size(other_w, other_h, this_w, this_h)) { |
| sf->x_scale_fp = REF_INVALID_SCALE; |
| sf->y_scale_fp = REF_INVALID_SCALE; |
| return; |
| } |
| |
| sf->x_scale_fp = get_fixed_point_scale_factor(other_w, this_w); |
| sf->y_scale_fp = get_fixed_point_scale_factor(other_h, this_h); |
| |
| sf->x_step_q4 = get_coarse_point_scale_factor(other_w, this_w); |
| sf->y_step_q4 = get_coarse_point_scale_factor(other_h, this_h); |
| |
| if (av1_is_scaled(sf)) { |
| sf->scale_value_x = scaled_x; |
| sf->scale_value_y = scaled_y; |
| } else { |
| sf->scale_value_x = unscaled_value; |
| sf->scale_value_y = unscaled_value; |
| } |
| |
| // TODO(agrange): Investigate the best choice of functions to use here |
| // for EIGHTTAP_SMOOTH. Since it is not interpolating, need to choose what |
| // to do at full-pel offsets. The current selection, where the filter is |
| // applied in one direction only, and not at all for 0,0, seems to give the |
| // best quality, but it may be worth trying an additional mode that does |
| // do the filtering on full-pel. |
| if (sf->x_step_q4 == SCALE_SUBPEL_SHIFTS) { |
| if (sf->y_step_q4 == SCALE_SUBPEL_SHIFTS) { |
| // No scaling in either direction. |
| sf->predict[0][0][0] = aom_convolve_copy; |
| sf->predict[0][0][1] = aom_convolve_avg; |
| sf->predict[0][1][0] = aom_convolve8_vert; |
| sf->predict[0][1][1] = aom_convolve8_avg_vert; |
| sf->predict[1][0][0] = aom_convolve8_horiz; |
| sf->predict[1][0][1] = aom_convolve8_avg_horiz; |
| } else { |
| // No scaling in x direction. Must always scale in the y direction. |
| sf->predict[0][0][0] = aom_convolve8_vert; |
| sf->predict[0][0][1] = aom_convolve8_avg_vert; |
| sf->predict[0][1][0] = aom_convolve8_vert; |
| sf->predict[0][1][1] = aom_convolve8_avg_vert; |
| sf->predict[1][0][0] = aom_convolve8; |
| sf->predict[1][0][1] = aom_convolve8_avg; |
| } |
| } else { |
| if (sf->y_step_q4 == SCALE_SUBPEL_SHIFTS) { |
| // No scaling in the y direction. Must always scale in the x direction. |
| sf->predict[0][0][0] = aom_convolve8_horiz; |
| sf->predict[0][0][1] = aom_convolve8_avg_horiz; |
| sf->predict[0][1][0] = aom_convolve8; |
| sf->predict[0][1][1] = aom_convolve8_avg; |
| sf->predict[1][0][0] = aom_convolve8_horiz; |
| sf->predict[1][0][1] = aom_convolve8_avg_horiz; |
| } else { |
| // Must always scale in both directions. |
| sf->predict[0][0][0] = aom_convolve8; |
| sf->predict[0][0][1] = aom_convolve8_avg; |
| sf->predict[0][1][0] = aom_convolve8; |
| sf->predict[0][1][1] = aom_convolve8_avg; |
| sf->predict[1][0][0] = aom_convolve8; |
| sf->predict[1][0][1] = aom_convolve8_avg; |
| } |
| } |
| // 2D subpel motion always gets filtered in both directions |
| sf->predict[1][1][0] = aom_convolve8; |
| sf->predict[1][1][1] = aom_convolve8_avg; |
| |
| #if CONFIG_HIGHBITDEPTH |
| if (use_highbd) { |
| if (sf->x_step_q4 == SCALE_SUBPEL_SHIFTS) { |
| if (sf->y_step_q4 == SCALE_SUBPEL_SHIFTS) { |
| // No scaling in either direction. |
| sf->highbd_predict[0][0][0] = aom_highbd_convolve_copy; |
| sf->highbd_predict[0][0][1] = aom_highbd_convolve_avg; |
| sf->highbd_predict[0][1][0] = aom_highbd_convolve8_vert; |
| sf->highbd_predict[0][1][1] = aom_highbd_convolve8_avg_vert; |
| sf->highbd_predict[1][0][0] = aom_highbd_convolve8_horiz; |
| sf->highbd_predict[1][0][1] = aom_highbd_convolve8_avg_horiz; |
| } else { |
| // No scaling in x direction. Must always scale in the y direction. |
| sf->highbd_predict[0][0][0] = aom_highbd_convolve8_vert; |
| sf->highbd_predict[0][0][1] = aom_highbd_convolve8_avg_vert; |
| sf->highbd_predict[0][1][0] = aom_highbd_convolve8_vert; |
| sf->highbd_predict[0][1][1] = aom_highbd_convolve8_avg_vert; |
| sf->highbd_predict[1][0][0] = aom_highbd_convolve8; |
| sf->highbd_predict[1][0][1] = aom_highbd_convolve8_avg; |
| } |
| } else { |
| if (sf->y_step_q4 == SCALE_SUBPEL_SHIFTS) { |
| // No scaling in the y direction. Must always scale in the x direction. |
| sf->highbd_predict[0][0][0] = aom_highbd_convolve8_horiz; |
| sf->highbd_predict[0][0][1] = aom_highbd_convolve8_avg_horiz; |
| sf->highbd_predict[0][1][0] = aom_highbd_convolve8; |
| sf->highbd_predict[0][1][1] = aom_highbd_convolve8_avg; |
| sf->highbd_predict[1][0][0] = aom_highbd_convolve8_horiz; |
| sf->highbd_predict[1][0][1] = aom_highbd_convolve8_avg_horiz; |
| } else { |
| // Must always scale in both directions. |
| sf->highbd_predict[0][0][0] = aom_highbd_convolve8; |
| sf->highbd_predict[0][0][1] = aom_highbd_convolve8_avg; |
| sf->highbd_predict[0][1][0] = aom_highbd_convolve8; |
| sf->highbd_predict[0][1][1] = aom_highbd_convolve8_avg; |
| sf->highbd_predict[1][0][0] = aom_highbd_convolve8; |
| sf->highbd_predict[1][0][1] = aom_highbd_convolve8_avg; |
| } |
| } |
| // 2D subpel motion always gets filtered in both directions. |
| sf->highbd_predict[1][1][0] = aom_highbd_convolve8; |
| sf->highbd_predict[1][1][1] = aom_highbd_convolve8_avg; |
| } |
| #endif // CONFIG_HIGHBITDEPTH |
| } |
