| /* |
| * Copyright (c) 2017, Alliance for Open Media. All rights reserved. |
| * |
| * This source code is subject to the terms of the BSD 2 Clause License and |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License |
| * was not distributed with this source code in the LICENSE file, you can |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open |
| * Media Patent License 1.0 was not distributed with this source code in the |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. |
| */ |
| |
| #include "av1/encoder/encodetxb.h" |
| |
| #include <stdint.h> |
| |
| #include "aom_ports/mem.h" |
| #include "av1/common/blockd.h" |
| #include "av1/common/idct.h" |
| #include "av1/common/pred_common.h" |
| #include "av1/common/scan.h" |
| #include "av1/encoder/bitstream.h" |
| #include "av1/encoder/cost.h" |
| #include "av1/encoder/encodeframe.h" |
| #include "av1/encoder/hash.h" |
| #include "av1/encoder/rdopt.h" |
| #include "av1/encoder/tokenize.h" |
| |
| void av1_alloc_txb_buf(AV1_COMP *cpi) { |
| AV1_COMMON *cm = &cpi->common; |
| CoeffBufferPool *coeff_buf_pool = &cpi->coeff_buffer_pool; |
| const int num_sb_rows = |
| CEIL_POWER_OF_TWO(cm->mi_params.mi_rows, cm->seq_params->mib_size_log2); |
| const int num_sb_cols = |
| CEIL_POWER_OF_TWO(cm->mi_params.mi_cols, cm->seq_params->mib_size_log2); |
| const int size = num_sb_rows * num_sb_cols; |
| const int num_planes = av1_num_planes(cm); |
| const int subsampling_x = cm->seq_params->subsampling_x; |
| const int subsampling_y = cm->seq_params->subsampling_y; |
| const int luma_max_sb_square = |
| 1 << num_pels_log2_lookup[cm->seq_params->sb_size]; |
| const int chroma_max_sb_square = |
| luma_max_sb_square >> (subsampling_x + subsampling_y); |
| const int total_max_sb_square = |
| (luma_max_sb_square + (num_planes - 1) * chroma_max_sb_square); |
| if ((size_t)size > SIZE_MAX / (size_t)total_max_sb_square) { |
| aom_internal_error(cm->error, AOM_CODEC_ERROR, |
| "A multiplication would overflow size_t"); |
| } |
| const size_t num_tcoeffs = (size_t)size * (size_t)total_max_sb_square; |
| const int txb_unit_size = TX_SIZE_W_MIN * TX_SIZE_H_MIN; |
| |
| av1_free_txb_buf(cpi); |
| // TODO(jingning): This should be further reduced. |
| CHECK_MEM_ERROR(cm, cpi->coeff_buffer_base, |
| aom_malloc(sizeof(*cpi->coeff_buffer_base) * size)); |
| if (sizeof(*coeff_buf_pool->tcoeff) > SIZE_MAX / num_tcoeffs) { |
| aom_internal_error(cm->error, AOM_CODEC_ERROR, |
| "A multiplication would overflow size_t"); |
| } |
| CHECK_MEM_ERROR( |
| cm, coeff_buf_pool->tcoeff, |
| aom_memalign(32, sizeof(*coeff_buf_pool->tcoeff) * num_tcoeffs)); |
| if (sizeof(*coeff_buf_pool->eobs) > SIZE_MAX / num_tcoeffs) { |
| aom_internal_error(cm->error, AOM_CODEC_ERROR, |
| "A multiplication would overflow size_t"); |
| } |
| CHECK_MEM_ERROR( |
| cm, coeff_buf_pool->eobs, |
| aom_malloc(sizeof(*coeff_buf_pool->eobs) * num_tcoeffs / txb_unit_size)); |
| if (sizeof(*coeff_buf_pool->entropy_ctx) > SIZE_MAX / num_tcoeffs) { |
| aom_internal_error(cm->error, AOM_CODEC_ERROR, |
| "A multiplication would overflow size_t"); |
| } |
| CHECK_MEM_ERROR(cm, coeff_buf_pool->entropy_ctx, |
| aom_malloc(sizeof(*coeff_buf_pool->entropy_ctx) * |
| num_tcoeffs / txb_unit_size)); |
| |
| tran_low_t *tcoeff_ptr = coeff_buf_pool->tcoeff; |
| uint16_t *eob_ptr = coeff_buf_pool->eobs; |
| uint8_t *entropy_ctx_ptr = coeff_buf_pool->entropy_ctx; |
| for (int i = 0; i < size; i++) { |
| for (int plane = 0; plane < num_planes; plane++) { |
| const int max_sb_square = |
| (plane == AOM_PLANE_Y) ? luma_max_sb_square : chroma_max_sb_square; |
| cpi->coeff_buffer_base[i].tcoeff[plane] = tcoeff_ptr; |
| cpi->coeff_buffer_base[i].eobs[plane] = eob_ptr; |
| cpi->coeff_buffer_base[i].entropy_ctx[plane] = entropy_ctx_ptr; |
| tcoeff_ptr += max_sb_square; |
| eob_ptr += max_sb_square / txb_unit_size; |
| entropy_ctx_ptr += max_sb_square / txb_unit_size; |
| } |
| } |
| } |
| |
| void av1_free_txb_buf(AV1_COMP *cpi) { |
| CoeffBufferPool *coeff_buf_pool = &cpi->coeff_buffer_pool; |
| aom_free(cpi->coeff_buffer_base); |
| cpi->coeff_buffer_base = NULL; |
| aom_free(coeff_buf_pool->tcoeff); |
| coeff_buf_pool->tcoeff = NULL; |
| aom_free(coeff_buf_pool->eobs); |
| coeff_buf_pool->eobs = NULL; |
| aom_free(coeff_buf_pool->entropy_ctx); |
| coeff_buf_pool->entropy_ctx = NULL; |
| } |
| |
| static void write_golomb(aom_writer *w, int level) { |
| int x = level + 1; |
| int i = x; |
| int length = 0; |
| |
| while (i) { |
| i >>= 1; |
| ++length; |
| } |
| assert(length > 0); |
| |
| for (i = 0; i < length - 1; ++i) aom_write_bit(w, 0); |
| |
| for (i = length - 1; i >= 0; --i) aom_write_bit(w, (x >> i) & 0x01); |
| } |
| |
| static const int8_t eob_to_pos_small[33] = { |
| 0, 1, 2, // 0-2 |
| 3, 3, // 3-4 |
| 4, 4, 4, 4, // 5-8 |
| 5, 5, 5, 5, 5, 5, 5, 5, // 9-16 |
| 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6 // 17-32 |
| }; |
| |
| static const int8_t eob_to_pos_large[17] = { |
| 6, // place holder |
| 7, // 33-64 |
| 8, 8, // 65-128 |
| 9, 9, 9, 9, // 129-256 |
| 10, 10, 10, 10, 10, 10, 10, 10, // 257-512 |
| 11 // 513- |
| }; |
| |
| int av1_get_eob_pos_token(const int eob, int *const extra) { |
| int t; |
| |
| if (eob < 33) { |
| t = eob_to_pos_small[eob]; |
| } else { |
| const int e = AOMMIN((eob - 1) >> 5, 16); |
| t = eob_to_pos_large[e]; |
| } |
| |
| *extra = eob - av1_eob_group_start[t]; |
| |
| return t; |
| } |
| |
| #if CONFIG_ENTROPY_STATS |
| static void update_eob_context(int cdf_idx, int eob, TX_SIZE tx_size, |
| TX_CLASS tx_class, PLANE_TYPE plane, |
| FRAME_CONTEXT *ec_ctx, FRAME_COUNTS *counts, |
| uint8_t allow_update_cdf) { |
| #else |
| static void update_eob_context(int eob, TX_SIZE tx_size, TX_CLASS tx_class, |
| PLANE_TYPE plane, FRAME_CONTEXT *ec_ctx, |
| uint8_t allow_update_cdf) { |
| #endif |
| int eob_extra; |
| const int eob_pt = av1_get_eob_pos_token(eob, &eob_extra); |
| TX_SIZE txs_ctx = get_txsize_entropy_ctx(tx_size); |
| |
| const int eob_multi_size = txsize_log2_minus4[tx_size]; |
| const int eob_multi_ctx = (tx_class == TX_CLASS_2D) ? 0 : 1; |
| |
| switch (eob_multi_size) { |
| case 0: |
| #if CONFIG_ENTROPY_STATS |
| ++counts->eob_multi16[cdf_idx][plane][eob_multi_ctx][eob_pt - 1]; |
| #endif |
| if (allow_update_cdf) |
| update_cdf(ec_ctx->eob_flag_cdf16[plane][eob_multi_ctx], eob_pt - 1, 5); |
| break; |
| case 1: |
| #if CONFIG_ENTROPY_STATS |
| ++counts->eob_multi32[cdf_idx][plane][eob_multi_ctx][eob_pt - 1]; |
| #endif |
| if (allow_update_cdf) |
| update_cdf(ec_ctx->eob_flag_cdf32[plane][eob_multi_ctx], eob_pt - 1, 6); |
| break; |
| case 2: |
| #if CONFIG_ENTROPY_STATS |
| ++counts->eob_multi64[cdf_idx][plane][eob_multi_ctx][eob_pt - 1]; |
| #endif |
| if (allow_update_cdf) |
| update_cdf(ec_ctx->eob_flag_cdf64[plane][eob_multi_ctx], eob_pt - 1, 7); |
| break; |
| case 3: |
| #if CONFIG_ENTROPY_STATS |
| ++counts->eob_multi128[cdf_idx][plane][eob_multi_ctx][eob_pt - 1]; |
| #endif |
| if (allow_update_cdf) { |
| update_cdf(ec_ctx->eob_flag_cdf128[plane][eob_multi_ctx], eob_pt - 1, |
| 8); |
| } |
| break; |
| case 4: |
| #if CONFIG_ENTROPY_STATS |
| ++counts->eob_multi256[cdf_idx][plane][eob_multi_ctx][eob_pt - 1]; |
| #endif |
| if (allow_update_cdf) { |
| update_cdf(ec_ctx->eob_flag_cdf256[plane][eob_multi_ctx], eob_pt - 1, |
| 9); |
| } |
| break; |
| case 5: |
| #if CONFIG_ENTROPY_STATS |
| ++counts->eob_multi512[cdf_idx][plane][eob_multi_ctx][eob_pt - 1]; |
| #endif |
| if (allow_update_cdf) { |
| update_cdf(ec_ctx->eob_flag_cdf512[plane][eob_multi_ctx], eob_pt - 1, |
| 10); |
| } |
| break; |
| case 6: |
| default: |
| #if CONFIG_ENTROPY_STATS |
| ++counts->eob_multi1024[cdf_idx][plane][eob_multi_ctx][eob_pt - 1]; |
| #endif |
| if (allow_update_cdf) { |
| update_cdf(ec_ctx->eob_flag_cdf1024[plane][eob_multi_ctx], eob_pt - 1, |
| 11); |
| } |
| break; |
| } |
| |
| if (av1_eob_offset_bits[eob_pt] > 0) { |
| int eob_ctx = eob_pt - 3; |
| int eob_shift = av1_eob_offset_bits[eob_pt] - 1; |
| int bit = (eob_extra & (1 << eob_shift)) ? 1 : 0; |
| #if CONFIG_ENTROPY_STATS |
| counts->eob_extra[cdf_idx][txs_ctx][plane][eob_pt][bit]++; |
| #endif // CONFIG_ENTROPY_STATS |
| if (allow_update_cdf) |
| update_cdf(ec_ctx->eob_extra_cdf[txs_ctx][plane][eob_ctx], bit, 2); |
| } |
| } |
| |
| static inline int get_nz_map_ctx(const uint8_t *const levels, |
| const int coeff_idx, const int bhl, |
| const int width, const int scan_idx, |
| const int is_eob, const TX_SIZE tx_size, |
| const TX_CLASS tx_class) { |
| if (is_eob) { |
| if (scan_idx == 0) return 0; |
| if (scan_idx <= (width << bhl) / 8) return 1; |
| if (scan_idx <= (width << bhl) / 4) return 2; |
| return 3; |
| } |
| const int stats = |
| get_nz_mag(levels + get_padded_idx(coeff_idx, bhl), bhl, tx_class); |
| return get_nz_map_ctx_from_stats(stats, coeff_idx, bhl, tx_size, tx_class); |
| } |
| |
| void av1_txb_init_levels_c(const tran_low_t *const coeff, const int width, |
| const int height, uint8_t *const levels) { |
| const int stride = height + TX_PAD_HOR; |
| uint8_t *ls = levels; |
| |
| memset(levels + stride * width, 0, |
| sizeof(*levels) * (TX_PAD_BOTTOM * stride + TX_PAD_END)); |
| |
| for (int i = 0; i < width; i++) { |
| for (int j = 0; j < height; j++) { |
| *ls++ = (uint8_t)clamp(abs(coeff[i * height + j]), 0, INT8_MAX); |
| } |
| for (int j = 0; j < TX_PAD_HOR; j++) { |
| *ls++ = 0; |
| } |
| } |
| } |
| |
| void av1_get_nz_map_contexts_c(const uint8_t *const levels, |
| const int16_t *const scan, const uint16_t eob, |
| const TX_SIZE tx_size, const TX_CLASS tx_class, |
| int8_t *const coeff_contexts) { |
| const int bhl = get_txb_bhl(tx_size); |
| const int width = get_txb_wide(tx_size); |
| for (int i = 0; i < eob; ++i) { |
| const int pos = scan[i]; |
| coeff_contexts[pos] = get_nz_map_ctx(levels, pos, bhl, width, i, |
| i == eob - 1, tx_size, tx_class); |
| } |
| } |
| |
| void av1_write_coeffs_txb(const AV1_COMMON *const cm, MACROBLOCK *const x, |
| aom_writer *w, int blk_row, int blk_col, int plane, |
| int block, TX_SIZE tx_size) { |
| MACROBLOCKD *xd = &x->e_mbd; |
| const CB_COEFF_BUFFER *cb_coef_buff = x->cb_coef_buff; |
| const PLANE_TYPE plane_type = get_plane_type(plane); |
| const int txb_offset = x->mbmi_ext_frame->cb_offset[plane_type] / |
| (TX_SIZE_W_MIN * TX_SIZE_H_MIN); |
| const uint16_t *eob_txb = cb_coef_buff->eobs[plane] + txb_offset; |
| const uint16_t eob = eob_txb[block]; |
| const uint8_t *entropy_ctx = cb_coef_buff->entropy_ctx[plane] + txb_offset; |
| const int txb_skip_ctx = entropy_ctx[block] & TXB_SKIP_CTX_MASK; |
| const TX_SIZE txs_ctx = get_txsize_entropy_ctx(tx_size); |
| FRAME_CONTEXT *ec_ctx = xd->tile_ctx; |
| aom_write_symbol(w, eob == 0, ec_ctx->txb_skip_cdf[txs_ctx][txb_skip_ctx], 2); |
| if (eob == 0) return; |
| |
| const TX_TYPE tx_type = |
| av1_get_tx_type(xd, plane_type, blk_row, blk_col, tx_size, |
| cm->features.reduced_tx_set_used); |
| // Only y plane's tx_type is transmitted |
| if (plane == 0) { |
| av1_write_tx_type(cm, xd, tx_type, tx_size, w); |
| } |
| |
| int eob_extra; |
| const int eob_pt = av1_get_eob_pos_token(eob, &eob_extra); |
| const int eob_multi_size = txsize_log2_minus4[tx_size]; |
| const TX_CLASS tx_class = tx_type_to_class[tx_type]; |
| const int eob_multi_ctx = (tx_class == TX_CLASS_2D) ? 0 : 1; |
| switch (eob_multi_size) { |
| case 0: |
| aom_write_symbol(w, eob_pt - 1, |
| ec_ctx->eob_flag_cdf16[plane_type][eob_multi_ctx], 5); |
| break; |
| case 1: |
| aom_write_symbol(w, eob_pt - 1, |
| ec_ctx->eob_flag_cdf32[plane_type][eob_multi_ctx], 6); |
| break; |
| case 2: |
| aom_write_symbol(w, eob_pt - 1, |
| ec_ctx->eob_flag_cdf64[plane_type][eob_multi_ctx], 7); |
| break; |
| case 3: |
| aom_write_symbol(w, eob_pt - 1, |
| ec_ctx->eob_flag_cdf128[plane_type][eob_multi_ctx], 8); |
| break; |
| case 4: |
| aom_write_symbol(w, eob_pt - 1, |
| ec_ctx->eob_flag_cdf256[plane_type][eob_multi_ctx], 9); |
| break; |
| case 5: |
| aom_write_symbol(w, eob_pt - 1, |
| ec_ctx->eob_flag_cdf512[plane_type][eob_multi_ctx], 10); |
| break; |
| default: |
| aom_write_symbol(w, eob_pt - 1, |
| ec_ctx->eob_flag_cdf1024[plane_type][eob_multi_ctx], 11); |
| break; |
| } |
| |
| const int eob_offset_bits = av1_eob_offset_bits[eob_pt]; |
| if (eob_offset_bits > 0) { |
| const int eob_ctx = eob_pt - 3; |
| int eob_shift = eob_offset_bits - 1; |
| int bit = (eob_extra & (1 << eob_shift)) ? 1 : 0; |
| aom_write_symbol(w, bit, |
| ec_ctx->eob_extra_cdf[txs_ctx][plane_type][eob_ctx], 2); |
| for (int i = 1; i < eob_offset_bits; i++) { |
| eob_shift = eob_offset_bits - 1 - i; |
| bit = (eob_extra & (1 << eob_shift)) ? 1 : 0; |
| aom_write_bit(w, bit); |
| } |
| } |
| |
| const int width = get_txb_wide(tx_size); |
| const int height = get_txb_high(tx_size); |
| uint8_t levels_buf[TX_PAD_2D]; |
| uint8_t *const levels = set_levels(levels_buf, height); |
| const tran_low_t *tcoeff_txb = |
| cb_coef_buff->tcoeff[plane] + x->mbmi_ext_frame->cb_offset[plane_type]; |
| const tran_low_t *tcoeff = tcoeff_txb + BLOCK_OFFSET(block); |
| av1_txb_init_levels(tcoeff, width, height, levels); |
| const SCAN_ORDER *const scan_order = get_scan(tx_size, tx_type); |
| const int16_t *const scan = scan_order->scan; |
| DECLARE_ALIGNED(16, int8_t, coeff_contexts[MAX_TX_SQUARE]); |
| av1_get_nz_map_contexts(levels, scan, eob, tx_size, tx_class, coeff_contexts); |
| |
| const int bhl = get_txb_bhl(tx_size); |
| for (int c = eob - 1; c >= 0; --c) { |
| const int pos = scan[c]; |
| const int coeff_ctx = coeff_contexts[pos]; |
| const tran_low_t v = tcoeff[pos]; |
| const tran_low_t level = abs(v); |
| |
| if (c == eob - 1) { |
| aom_write_symbol( |
| w, AOMMIN(level, 3) - 1, |
| ec_ctx->coeff_base_eob_cdf[txs_ctx][plane_type][coeff_ctx], 3); |
| } else { |
| aom_write_symbol(w, AOMMIN(level, 3), |
| ec_ctx->coeff_base_cdf[txs_ctx][plane_type][coeff_ctx], |
| 4); |
| } |
| if (level > NUM_BASE_LEVELS) { |
| // level is above 1. |
| const int base_range = level - 1 - NUM_BASE_LEVELS; |
| const int br_ctx = get_br_ctx(levels, pos, bhl, tx_class); |
| aom_cdf_prob *cdf = |
| ec_ctx->coeff_br_cdf[AOMMIN(txs_ctx, TX_32X32)][plane_type][br_ctx]; |
| for (int idx = 0; idx < COEFF_BASE_RANGE; idx += BR_CDF_SIZE - 1) { |
| const int k = AOMMIN(base_range - idx, BR_CDF_SIZE - 1); |
| aom_write_symbol(w, k, cdf, BR_CDF_SIZE); |
| if (k < BR_CDF_SIZE - 1) break; |
| } |
| } |
| } |
| |
| // Loop to code all signs in the transform block, |
| // starting with the sign of DC (if applicable) |
| for (int c = 0; c < eob; ++c) { |
| const tran_low_t v = tcoeff[scan[c]]; |
| const tran_low_t level = abs(v); |
| const int sign = (v < 0) ? 1 : 0; |
| if (level) { |
| if (c == 0) { |
| const int dc_sign_ctx = |
| (entropy_ctx[block] >> DC_SIGN_CTX_SHIFT) & DC_SIGN_CTX_MASK; |
| aom_write_symbol(w, sign, ec_ctx->dc_sign_cdf[plane_type][dc_sign_ctx], |
| 2); |
| } else { |
| aom_write_bit(w, sign); |
| } |
| if (level > COEFF_BASE_RANGE + NUM_BASE_LEVELS) |
| write_golomb(w, level - COEFF_BASE_RANGE - 1 - NUM_BASE_LEVELS); |
| } |
| } |
| } |
| |
| void av1_write_intra_coeffs_mb(const AV1_COMMON *const cm, MACROBLOCK *x, |
| aom_writer *w, BLOCK_SIZE bsize) { |
| MACROBLOCKD *xd = &x->e_mbd; |
| const int num_planes = av1_num_planes(cm); |
| int block[MAX_MB_PLANE] = { 0 }; |
| int row, col; |
| assert(bsize == get_plane_block_size(bsize, xd->plane[0].subsampling_x, |
| xd->plane[0].subsampling_y)); |
| const int max_blocks_wide = max_block_wide(xd, bsize, 0); |
| const int max_blocks_high = max_block_high(xd, bsize, 0); |
| const BLOCK_SIZE max_unit_bsize = BLOCK_64X64; |
| int mu_blocks_wide = mi_size_wide[max_unit_bsize]; |
| int mu_blocks_high = mi_size_high[max_unit_bsize]; |
| mu_blocks_wide = AOMMIN(max_blocks_wide, mu_blocks_wide); |
| mu_blocks_high = AOMMIN(max_blocks_high, mu_blocks_high); |
| |
| for (row = 0; row < max_blocks_high; row += mu_blocks_high) { |
| for (col = 0; col < max_blocks_wide; col += mu_blocks_wide) { |
| for (int plane = 0; plane < num_planes; ++plane) { |
| if (plane && !xd->is_chroma_ref) break; |
| const TX_SIZE tx_size = av1_get_tx_size(plane, xd); |
| const int stepr = tx_size_high_unit[tx_size]; |
| const int stepc = tx_size_wide_unit[tx_size]; |
| const int step = stepr * stepc; |
| const struct macroblockd_plane *const pd = &xd->plane[plane]; |
| const int unit_height = ROUND_POWER_OF_TWO( |
| AOMMIN(mu_blocks_high + row, max_blocks_high), pd->subsampling_y); |
| const int unit_width = ROUND_POWER_OF_TWO( |
| AOMMIN(mu_blocks_wide + col, max_blocks_wide), pd->subsampling_x); |
| for (int blk_row = row >> pd->subsampling_y; blk_row < unit_height; |
| blk_row += stepr) { |
| for (int blk_col = col >> pd->subsampling_x; blk_col < unit_width; |
| blk_col += stepc) { |
| av1_write_coeffs_txb(cm, x, w, blk_row, blk_col, plane, |
| block[plane], tx_size); |
| block[plane] += step; |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| uint8_t av1_get_txb_entropy_context(const tran_low_t *qcoeff, |
| const SCAN_ORDER *scan_order, int eob) { |
| const int16_t *const scan = scan_order->scan; |
| int cul_level = 0; |
| int c; |
| |
| if (eob == 0) return 0; |
| for (c = 0; c < eob; ++c) { |
| cul_level += abs(qcoeff[scan[c]]); |
| if (cul_level > COEFF_CONTEXT_MASK) break; |
| } |
| |
| cul_level = AOMMIN(COEFF_CONTEXT_MASK, cul_level); |
| set_dc_sign(&cul_level, qcoeff[0]); |
| |
| return (uint8_t)cul_level; |
| } |
| |
| static void update_tx_type_count(const AV1_COMP *cpi, const AV1_COMMON *cm, |
| MACROBLOCKD *xd, int blk_row, int blk_col, |
| int plane, TX_SIZE tx_size, |
| FRAME_COUNTS *counts, |
| uint8_t allow_update_cdf) { |
| MB_MODE_INFO *mbmi = xd->mi[0]; |
| int is_inter = is_inter_block(mbmi); |
| const int reduced_tx_set_used = cm->features.reduced_tx_set_used; |
| FRAME_CONTEXT *fc = xd->tile_ctx; |
| #if !CONFIG_ENTROPY_STATS |
| (void)counts; |
| #endif // !CONFIG_ENTROPY_STATS |
| |
| // Only y plane's tx_type is updated |
| if (plane > 0) return; |
| const TX_TYPE tx_type = av1_get_tx_type(xd, PLANE_TYPE_Y, blk_row, blk_col, |
| tx_size, reduced_tx_set_used); |
| if (is_inter) { |
| if (cpi->oxcf.txfm_cfg.use_inter_dct_only) { |
| assert(tx_type == DCT_DCT); |
| } |
| } else { |
| if (cpi->oxcf.txfm_cfg.use_intra_dct_only) { |
| assert(tx_type == DCT_DCT); |
| } else if (cpi->oxcf.txfm_cfg.use_intra_default_tx_only) { |
| const TX_TYPE default_type = get_default_tx_type( |
| PLANE_TYPE_Y, xd, tx_size, cpi->use_screen_content_tools); |
| (void)default_type; |
| // TODO(kyslov): We don't always respect use_intra_default_tx_only flag in |
| // NonRD and REALTIME case. Specifically we ignore it in hybrid inta mode |
| // search, when picking up intra mode in nonRD inter mode search and in RD |
| // REALTIME mode when we limit TX type usage. |
| // We need to fix txfm cfg for these cases. Meanwhile relieving the |
| // assert. |
| assert(tx_type == default_type || cpi->sf.rt_sf.use_nonrd_pick_mode || |
| cpi->oxcf.mode == REALTIME); |
| } |
| } |
| |
| if (get_ext_tx_types(tx_size, is_inter, reduced_tx_set_used) > 1 && |
| cm->quant_params.base_qindex > 0 && !mbmi->skip_txfm && |
| !segfeature_active(&cm->seg, mbmi->segment_id, SEG_LVL_SKIP)) { |
| const int eset = get_ext_tx_set(tx_size, is_inter, reduced_tx_set_used); |
| if (eset > 0) { |
| const TxSetType tx_set_type = |
| av1_get_ext_tx_set_type(tx_size, is_inter, reduced_tx_set_used); |
| if (is_inter) { |
| if (allow_update_cdf) { |
| update_cdf(fc->inter_ext_tx_cdf[eset][txsize_sqr_map[tx_size]], |
| av1_ext_tx_ind[tx_set_type][tx_type], |
| av1_num_ext_tx_set[tx_set_type]); |
| } |
| #if CONFIG_ENTROPY_STATS |
| ++counts->inter_ext_tx[eset][txsize_sqr_map[tx_size]] |
| [av1_ext_tx_ind[tx_set_type][tx_type]]; |
| #endif // CONFIG_ENTROPY_STATS |
| } else { |
| PREDICTION_MODE intra_dir; |
| if (mbmi->filter_intra_mode_info.use_filter_intra) |
| intra_dir = fimode_to_intradir[mbmi->filter_intra_mode_info |
| .filter_intra_mode]; |
| else |
| intra_dir = mbmi->mode; |
| #if CONFIG_ENTROPY_STATS |
| ++counts->intra_ext_tx[eset][txsize_sqr_map[tx_size]][intra_dir] |
| [av1_ext_tx_ind[tx_set_type][tx_type]]; |
| #endif // CONFIG_ENTROPY_STATS |
| if (allow_update_cdf) { |
| update_cdf( |
| fc->intra_ext_tx_cdf[eset][txsize_sqr_map[tx_size]][intra_dir], |
| av1_ext_tx_ind[tx_set_type][tx_type], |
| av1_num_ext_tx_set[tx_set_type]); |
| } |
| } |
| } |
| } |
| } |
| |
| void av1_update_and_record_txb_context(int plane, int block, int blk_row, |
| int blk_col, BLOCK_SIZE plane_bsize, |
| TX_SIZE tx_size, void *arg) { |
| struct tokenize_b_args *const args = arg; |
| const AV1_COMP *cpi = args->cpi; |
| const AV1_COMMON *cm = &cpi->common; |
| ThreadData *const td = args->td; |
| MACROBLOCK *const x = &td->mb; |
| MACROBLOCKD *const xd = &x->e_mbd; |
| struct macroblock_plane *p = &x->plane[plane]; |
| struct macroblockd_plane *pd = &xd->plane[plane]; |
| const int eob = p->eobs[block]; |
| const int block_offset = BLOCK_OFFSET(block); |
| tran_low_t *qcoeff = p->qcoeff + block_offset; |
| const PLANE_TYPE plane_type = pd->plane_type; |
| const TX_TYPE tx_type = |
| av1_get_tx_type(xd, plane_type, blk_row, blk_col, tx_size, |
| cm->features.reduced_tx_set_used); |
| const SCAN_ORDER *const scan_order = get_scan(tx_size, tx_type); |
| tran_low_t *tcoeff; |
| assert(args->dry_run != DRY_RUN_COSTCOEFFS); |
| if (args->dry_run == OUTPUT_ENABLED) { |
| MB_MODE_INFO *mbmi = xd->mi[0]; |
| TXB_CTX txb_ctx; |
| get_txb_ctx(plane_bsize, tx_size, plane, |
| pd->above_entropy_context + blk_col, |
| pd->left_entropy_context + blk_row, &txb_ctx); |
| const int bhl = get_txb_bhl(tx_size); |
| const int width = get_txb_wide(tx_size); |
| const int height = get_txb_high(tx_size); |
| const uint8_t allow_update_cdf = args->allow_update_cdf; |
| const TX_SIZE txsize_ctx = get_txsize_entropy_ctx(tx_size); |
| FRAME_CONTEXT *ec_ctx = xd->tile_ctx; |
| #if CONFIG_ENTROPY_STATS |
| int cdf_idx = cm->coef_cdf_category; |
| ++td->counts->txb_skip[cdf_idx][txsize_ctx][txb_ctx.txb_skip_ctx][eob == 0]; |
| #endif // CONFIG_ENTROPY_STATS |
| if (allow_update_cdf) { |
| update_cdf(ec_ctx->txb_skip_cdf[txsize_ctx][txb_ctx.txb_skip_ctx], |
| eob == 0, 2); |
| } |
| |
| CB_COEFF_BUFFER *cb_coef_buff = x->cb_coef_buff; |
| const int txb_offset = x->mbmi_ext_frame->cb_offset[plane_type] / |
| (TX_SIZE_W_MIN * TX_SIZE_H_MIN); |
| uint16_t *eob_txb = cb_coef_buff->eobs[plane] + txb_offset; |
| uint8_t *const entropy_ctx = cb_coef_buff->entropy_ctx[plane] + txb_offset; |
| entropy_ctx[block] = txb_ctx.txb_skip_ctx; |
| eob_txb[block] = eob; |
| |
| if (eob == 0) { |
| av1_set_entropy_contexts(xd, pd, plane, plane_bsize, tx_size, 0, blk_col, |
| blk_row); |
| return; |
| } |
| const int segment_id = mbmi->segment_id; |
| const int seg_eob = av1_get_tx_eob(&cpi->common.seg, segment_id, tx_size); |
| tran_low_t *tcoeff_txb = |
| cb_coef_buff->tcoeff[plane] + x->mbmi_ext_frame->cb_offset[plane_type]; |
| tcoeff = tcoeff_txb + block_offset; |
| memcpy(tcoeff, qcoeff, sizeof(*tcoeff) * seg_eob); |
| |
| uint8_t levels_buf[TX_PAD_2D]; |
| uint8_t *const levels = set_levels(levels_buf, height); |
| av1_txb_init_levels(tcoeff, width, height, levels); |
| update_tx_type_count(cpi, cm, xd, blk_row, blk_col, plane, tx_size, |
| td->counts, allow_update_cdf); |
| |
| const TX_CLASS tx_class = tx_type_to_class[tx_type]; |
| const int16_t *const scan = scan_order->scan; |
| |
| // record tx type usage |
| td->rd_counts.tx_type_used[tx_size][tx_type]++; |
| |
| #if CONFIG_ENTROPY_STATS |
| update_eob_context(cdf_idx, eob, tx_size, tx_class, plane_type, ec_ctx, |
| td->counts, allow_update_cdf); |
| #else |
| update_eob_context(eob, tx_size, tx_class, plane_type, ec_ctx, |
| allow_update_cdf); |
| #endif |
| |
| DECLARE_ALIGNED(16, int8_t, coeff_contexts[MAX_TX_SQUARE]); |
| av1_get_nz_map_contexts(levels, scan, eob, tx_size, tx_class, |
| coeff_contexts); |
| |
| for (int c = eob - 1; c >= 0; --c) { |
| const int pos = scan[c]; |
| const int coeff_ctx = coeff_contexts[pos]; |
| const tran_low_t v = qcoeff[pos]; |
| const tran_low_t level = abs(v); |
| /* abs_sum_level is needed to decide the job scheduling order of |
| * pack bitstream multi-threading. This data is not needed if |
| * multi-threading is disabled. */ |
| if (cpi->mt_info.pack_bs_mt_enabled) td->abs_sum_level += level; |
| |
| if (allow_update_cdf) { |
| if (c == eob - 1) { |
| assert(coeff_ctx < 4); |
| update_cdf( |
| ec_ctx->coeff_base_eob_cdf[txsize_ctx][plane_type][coeff_ctx], |
| AOMMIN(level, 3) - 1, 3); |
| } else { |
| update_cdf(ec_ctx->coeff_base_cdf[txsize_ctx][plane_type][coeff_ctx], |
| AOMMIN(level, 3), 4); |
| } |
| } |
| if (c == eob - 1) { |
| assert(coeff_ctx < 4); |
| #if CONFIG_ENTROPY_STATS |
| ++td->counts->coeff_base_eob_multi[cdf_idx][txsize_ctx][plane_type] |
| [coeff_ctx][AOMMIN(level, 3) - 1]; |
| } else { |
| ++td->counts->coeff_base_multi[cdf_idx][txsize_ctx][plane_type] |
| [coeff_ctx][AOMMIN(level, 3)]; |
| #endif |
| } |
| if (level > NUM_BASE_LEVELS) { |
| const int base_range = level - 1 - NUM_BASE_LEVELS; |
| const int br_ctx = get_br_ctx(levels, pos, bhl, tx_class); |
| for (int idx = 0; idx < COEFF_BASE_RANGE; idx += BR_CDF_SIZE - 1) { |
| const int k = AOMMIN(base_range - idx, BR_CDF_SIZE - 1); |
| if (allow_update_cdf) { |
| update_cdf(ec_ctx->coeff_br_cdf[AOMMIN(txsize_ctx, TX_32X32)] |
| [plane_type][br_ctx], |
| k, BR_CDF_SIZE); |
| } |
| for (int lps = 0; lps < BR_CDF_SIZE - 1; lps++) { |
| #if CONFIG_ENTROPY_STATS |
| ++td->counts->coeff_lps[AOMMIN(txsize_ctx, TX_32X32)][plane_type] |
| [lps][br_ctx][lps == k]; |
| #endif // CONFIG_ENTROPY_STATS |
| if (lps == k) break; |
| } |
| #if CONFIG_ENTROPY_STATS |
| ++td->counts->coeff_lps_multi[cdf_idx][AOMMIN(txsize_ctx, TX_32X32)] |
| [plane_type][br_ctx][k]; |
| #endif |
| if (k < BR_CDF_SIZE - 1) break; |
| } |
| } |
| } |
| // Update the context needed to code the DC sign (if applicable) |
| if (tcoeff[0] != 0) { |
| const int dc_sign = (tcoeff[0] < 0) ? 1 : 0; |
| const int dc_sign_ctx = txb_ctx.dc_sign_ctx; |
| #if CONFIG_ENTROPY_STATS |
| ++td->counts->dc_sign[plane_type][dc_sign_ctx][dc_sign]; |
| #endif // CONFIG_ENTROPY_STATS |
| if (allow_update_cdf) |
| update_cdf(ec_ctx->dc_sign_cdf[plane_type][dc_sign_ctx], dc_sign, 2); |
| entropy_ctx[block] |= dc_sign_ctx << DC_SIGN_CTX_SHIFT; |
| } |
| } else { |
| tcoeff = qcoeff; |
| } |
| const uint8_t cul_level = |
| av1_get_txb_entropy_context(tcoeff, scan_order, eob); |
| av1_set_entropy_contexts(xd, pd, plane, plane_bsize, tx_size, cul_level, |
| blk_col, blk_row); |
| } |
| |
| void av1_record_txb_context(int plane, int block, int blk_row, int blk_col, |
| BLOCK_SIZE plane_bsize, TX_SIZE tx_size, |
| void *arg) { |
| struct tokenize_b_args *const args = arg; |
| const AV1_COMP *cpi = args->cpi; |
| const AV1_COMMON *cm = &cpi->common; |
| ThreadData *const td = args->td; |
| MACROBLOCK *const x = &td->mb; |
| MACROBLOCKD *const xd = &x->e_mbd; |
| struct macroblock_plane *p = &x->plane[plane]; |
| struct macroblockd_plane *pd = &xd->plane[plane]; |
| const int eob = p->eobs[block]; |
| const int block_offset = BLOCK_OFFSET(block); |
| tran_low_t *qcoeff = p->qcoeff + block_offset; |
| const PLANE_TYPE plane_type = pd->plane_type; |
| const TX_TYPE tx_type = |
| av1_get_tx_type(xd, plane_type, blk_row, blk_col, tx_size, |
| cm->features.reduced_tx_set_used); |
| const SCAN_ORDER *const scan_order = get_scan(tx_size, tx_type); |
| tran_low_t *tcoeff; |
| assert(args->dry_run != DRY_RUN_COSTCOEFFS); |
| if (args->dry_run == OUTPUT_ENABLED) { |
| MB_MODE_INFO *mbmi = xd->mi[0]; |
| TXB_CTX txb_ctx; |
| get_txb_ctx(plane_bsize, tx_size, plane, |
| pd->above_entropy_context + blk_col, |
| pd->left_entropy_context + blk_row, &txb_ctx); |
| #if CONFIG_ENTROPY_STATS |
| const TX_SIZE txsize_ctx = get_txsize_entropy_ctx(tx_size); |
| const int bhl = get_txb_bhl(tx_size); |
| const int width = get_txb_wide(tx_size); |
| const int height = get_txb_high(tx_size); |
| int cdf_idx = cm->coef_cdf_category; |
| ++td->counts->txb_skip[cdf_idx][txsize_ctx][txb_ctx.txb_skip_ctx][eob == 0]; |
| #endif // CONFIG_ENTROPY_STATS |
| |
| CB_COEFF_BUFFER *cb_coef_buff = x->cb_coef_buff; |
| const int txb_offset = x->mbmi_ext_frame->cb_offset[plane_type] / |
| (TX_SIZE_W_MIN * TX_SIZE_H_MIN); |
| uint16_t *eob_txb = cb_coef_buff->eobs[plane] + txb_offset; |
| uint8_t *const entropy_ctx = cb_coef_buff->entropy_ctx[plane] + txb_offset; |
| entropy_ctx[block] = txb_ctx.txb_skip_ctx; |
| eob_txb[block] = eob; |
| |
| if (eob == 0) { |
| av1_set_entropy_contexts(xd, pd, plane, plane_bsize, tx_size, 0, blk_col, |
| blk_row); |
| return; |
| } |
| const int segment_id = mbmi->segment_id; |
| const int seg_eob = av1_get_tx_eob(&cpi->common.seg, segment_id, tx_size); |
| tran_low_t *tcoeff_txb = |
| cb_coef_buff->tcoeff[plane] + x->mbmi_ext_frame->cb_offset[plane_type]; |
| tcoeff = tcoeff_txb + block_offset; |
| memcpy(tcoeff, qcoeff, sizeof(*tcoeff) * seg_eob); |
| |
| #if CONFIG_ENTROPY_STATS |
| uint8_t levels_buf[TX_PAD_2D]; |
| uint8_t *const levels = set_levels(levels_buf, height); |
| av1_txb_init_levels(tcoeff, width, height, levels); |
| update_tx_type_count(cpi, cm, xd, blk_row, blk_col, plane, tx_size, |
| td->counts, 0 /*allow_update_cdf*/); |
| |
| const TX_CLASS tx_class = tx_type_to_class[tx_type]; |
| const bool do_coeff_scan = true; |
| #else |
| const bool do_coeff_scan = cpi->mt_info.pack_bs_mt_enabled; |
| #endif |
| const int16_t *const scan = scan_order->scan; |
| |
| // record tx type usage |
| td->rd_counts.tx_type_used[tx_size][tx_type]++; |
| |
| #if CONFIG_ENTROPY_STATS |
| FRAME_CONTEXT *ec_ctx = xd->tile_ctx; |
| update_eob_context(cdf_idx, eob, tx_size, tx_class, plane_type, ec_ctx, |
| td->counts, 0 /*allow_update_cdf*/); |
| |
| DECLARE_ALIGNED(16, int8_t, coeff_contexts[MAX_TX_SQUARE]); |
| av1_get_nz_map_contexts(levels, scan, eob, tx_size, tx_class, |
| coeff_contexts); |
| #endif |
| |
| for (int c = eob - 1; (c >= 0) && do_coeff_scan; --c) { |
| const int pos = scan[c]; |
| const tran_low_t v = qcoeff[pos]; |
| const tran_low_t level = abs(v); |
| /* abs_sum_level is needed to decide the job scheduling order of |
| * pack bitstream multi-threading. This data is not needed if |
| * multi-threading is disabled. */ |
| if (cpi->mt_info.pack_bs_mt_enabled) td->abs_sum_level += level; |
| |
| #if CONFIG_ENTROPY_STATS |
| const int coeff_ctx = coeff_contexts[pos]; |
| if (c == eob - 1) { |
| assert(coeff_ctx < 4); |
| ++td->counts->coeff_base_eob_multi[cdf_idx][txsize_ctx][plane_type] |
| [coeff_ctx][AOMMIN(level, 3) - 1]; |
| } else { |
| ++td->counts->coeff_base_multi[cdf_idx][txsize_ctx][plane_type] |
| [coeff_ctx][AOMMIN(level, 3)]; |
| } |
| if (level > NUM_BASE_LEVELS) { |
| const int base_range = level - 1 - NUM_BASE_LEVELS; |
| const int br_ctx = get_br_ctx(levels, pos, bhl, tx_class); |
| for (int idx = 0; idx < COEFF_BASE_RANGE; idx += BR_CDF_SIZE - 1) { |
| const int k = AOMMIN(base_range - idx, BR_CDF_SIZE - 1); |
| for (int lps = 0; lps < BR_CDF_SIZE - 1; lps++) { |
| ++td->counts->coeff_lps[AOMMIN(txsize_ctx, TX_32X32)][plane_type] |
| [lps][br_ctx][lps == k]; |
| if (lps == k) break; |
| } |
| ++td->counts->coeff_lps_multi[cdf_idx][AOMMIN(txsize_ctx, TX_32X32)] |
| [plane_type][br_ctx][k]; |
| if (k < BR_CDF_SIZE - 1) break; |
| } |
| } |
| #endif |
| } |
| // Update the context needed to code the DC sign (if applicable) |
| if (tcoeff[0] != 0) { |
| const int dc_sign_ctx = txb_ctx.dc_sign_ctx; |
| #if CONFIG_ENTROPY_STATS |
| const int dc_sign = (tcoeff[0] < 0) ? 1 : 0; |
| ++td->counts->dc_sign[plane_type][dc_sign_ctx][dc_sign]; |
| #endif // CONFIG_ENTROPY_STATS |
| entropy_ctx[block] |= dc_sign_ctx << DC_SIGN_CTX_SHIFT; |
| } |
| } else { |
| tcoeff = qcoeff; |
| } |
| const uint8_t cul_level = |
| av1_get_txb_entropy_context(tcoeff, scan_order, eob); |
| av1_set_entropy_contexts(xd, pd, plane, plane_bsize, tx_size, cul_level, |
| blk_col, blk_row); |
| } |
| |
| void av1_update_intra_mb_txb_context(const AV1_COMP *cpi, ThreadData *td, |
| RUN_TYPE dry_run, BLOCK_SIZE bsize, |
| uint8_t allow_update_cdf) { |
| const AV1_COMMON *const cm = &cpi->common; |
| const int num_planes = av1_num_planes(cm); |
| MACROBLOCK *const x = &td->mb; |
| MACROBLOCKD *const xd = &x->e_mbd; |
| MB_MODE_INFO *const mbmi = xd->mi[0]; |
| struct tokenize_b_args arg = { cpi, td, 0, allow_update_cdf, dry_run }; |
| if (mbmi->skip_txfm) { |
| av1_reset_entropy_context(xd, bsize, num_planes); |
| return; |
| } |
| const foreach_transformed_block_visitor visit = |
| allow_update_cdf ? av1_update_and_record_txb_context |
| : av1_record_txb_context; |
| |
| for (int plane = 0; plane < num_planes; ++plane) { |
| if (plane && !xd->is_chroma_ref) break; |
| const struct macroblockd_plane *const pd = &xd->plane[plane]; |
| const int ss_x = pd->subsampling_x; |
| const int ss_y = pd->subsampling_y; |
| const BLOCK_SIZE plane_bsize = get_plane_block_size(bsize, ss_x, ss_y); |
| av1_foreach_transformed_block_in_plane(xd, plane_bsize, plane, visit, &arg); |
| } |
| } |
| |
| CB_COEFF_BUFFER *av1_get_cb_coeff_buffer(const struct AV1_COMP *cpi, int mi_row, |
| int mi_col) { |
| const AV1_COMMON *const cm = &cpi->common; |
| const int mib_size_log2 = cm->seq_params->mib_size_log2; |
| const int stride = |
| CEIL_POWER_OF_TWO(cm->mi_params.mi_cols, cm->seq_params->mib_size_log2); |
| const int offset = |
| (mi_row >> mib_size_log2) * stride + (mi_col >> mib_size_log2); |
| return cpi->coeff_buffer_base + offset; |
| } |