/*
 * Copyright (c) 2017, Alliance for Open Media. All rights reserved
 *
 * This source code is subject to the terms of the BSD 2 Clause License and
 * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License
 * was not distributed with this source code in the LICENSE file, you can
 * obtain it at www.aomedia.org/license/software. If the Alliance for Open
 * Media Patent License 1.0 was not distributed with this source code in the
 * PATENTS file, you can obtain it at www.aomedia.org/license/patent.
 */

#ifndef AOM_AV1_ENCODER_ENCODETXB_H_
#define AOM_AV1_ENCODER_ENCODETXB_H_

#include "config/aom_config.h"

#include "av1/common/av1_common_int.h"
#include "av1/common/blockd.h"
#include "av1/common/txb_common.h"
#include "av1/encoder/block.h"
#include "av1/encoder/encoder.h"
#include "aom_dsp/bitwriter.h"
#ifdef __cplusplus
extern "C" {
#endif

/*!\cond */
#define TXB_SKIP_CTX_MASK 15
#define DC_SIGN_CTX_SHIFT 4
#define DC_SIGN_CTX_MASK 3

typedef struct TxbInfo {
  tran_low_t *qcoeff;
  uint8_t *levels;  // absolute values and clamped to 255.
  tran_low_t *dqcoeff;
  const tran_low_t *tcoeff;
  const int16_t *dequant;
  int shift;
  TX_SIZE tx_size;
  TX_SIZE txs_ctx;
  TX_TYPE tx_type;
  int bwl;
  int width;
  int height;
  int eob;
  int seg_eob;
  const SCAN_ORDER *scan_order;
  TXB_CTX *txb_ctx;
  int64_t rdmult;
  const qm_val_t *iqmatrix;
  int tx_type_cost;
} TxbInfo;

/*!\endcond */
/*!\brief Allocate the memory resources for all the macro blocks in the current
 * coding frame.
 * \ingroup coefficient_coding
 *
 * Each macro block will need a \ref CB_COEFF_BUFFER to store information for
 * rate-distortion optimization and entropy coding of transform coefficients.
 *
 * \param[in]    cpi            Top-level encoder structure
 */
void av1_alloc_txb_buf(AV1_COMP *cpi);
/*!\brief Free the memory resources for all the macro blocks in the current
 * coding frame.
 * \ingroup coefficient_coding
 *
 * See \ref av1_alloc_txb_buf and \ref CB_COEFF_BUFFER for more details.
 *
 * \param[in]    cpi            Top-level encoder structure
 */
void av1_free_txb_buf(AV1_COMP *cpi);
/*!\brief Compute the entropy cost of coding coefficients in a transform block.
 *
 * \ingroup coefficient_coding
 *
 * \param[in]    x                    Pointer to structure holding the data for
 the current encoding macroblock.
 * \param[in]    plane                The index of the current plane.
 * \param[in]    block                The index of the current transform block
 in the
 * macroblock. It's defined by number of 4x4 units that has been coded before
 * the currernt transform block.
 * \param[in]    tx_size              The transform size.
 * \param[in]    tx_type              The transform type.
 * \param[in]    txb_ctx              Context info for entropy coding transform
 block
 * skip flag (tx_skip) and the sign of DC coefficient (dc_sign).
 * \param[in]    reduced_tx_set_used  Whether the transform type is chosen from
 * a reduced set.
 */
int av1_cost_coeffs_txb(const MACROBLOCK *x, const int plane, const int block,
                        const TX_SIZE tx_size, const TX_TYPE tx_type,
                        const TXB_CTX *const txb_ctx, int reduced_tx_set_used);
/*!\cond */
int av1_cost_coeffs_txb_laplacian(const MACROBLOCK *x, const int plane,
                                  const int block, const TX_SIZE tx_size,
                                  const TX_TYPE tx_type,
                                  const TXB_CTX *const txb_ctx,
                                  const int reduced_tx_set_used,
                                  const int adjust_eob);
int av1_cost_coeffs_txb_estimate(const MACROBLOCK *x, const int plane,
                                 const int block, const TX_SIZE tx_size,
                                 const TX_TYPE tx_type);
/*!\endcond */

/*!\brief Write quantized coefficients in a transform block into bitstream using
 * entropy coding.
 *
 * \ingroup coefficient_coding
 *
 * This function will write the quantized coefficients in a transform block into
 * the bitstream using entropy coding.
 *
 * The coding steps are as follows.
 *
 * 1) Code the end of block position "eob", which is the scan index of the
 * last non-zero coefficient plus one.
 *
 * 2) Code the lower magnitude level (<= COEFF_BASE_RANGE + NUM_BASE_LEVELS)
 * for each coefficient in reversed scan order.
 *
 * 3) Code the sign and higher magnitude level
 * (> COEFF_BASE_RANGE + NUM_BASE_LEVELS) in forward scan order.
 *
 * \param[in]    cm             Top-level structure shared by encoder and
 * decoder
 * \param[in]    x              Pointer to structure holding the data for the
                                current encoding macroblock
 * \param[in]    w              Entropy coding write pointer
 * \param[in]    blk_row      The row index of the current transform block
 * in the macroblock. Each unit has 4 pixels in y plane
 * \param[in]    blk_col      The col index of the current transform block
 * in the macroblock. Each unit has 4 pixels in y plane
 * \param[in]    plane          The index of the current plane
 * \param[in]    block          The index of the current transform block in the
 * macroblock. It's defined by number of 4x4 units that has been coded before
 * the currernt transform block
 * \param[in]    tx_size        The given transform size
 */
void av1_write_coeffs_txb(const AV1_COMMON *const cm, MACROBLOCK *const x,
                          aom_writer *w, int blk_row, int blk_col, int plane,
                          int block, TX_SIZE tx_size);

/*!\brief Write quantized coefficients of all transform blocks in an intra
 * macroblock into the bitstream using entropy coding.
 *
 * \ingroup coefficient_coding
 *
 * All transform blocks in the intra macroblock share the same transform size.
 *
 * This function use \ref av1_write_coeffs_txb() to code each transform block in
 * raster order.
 *
 * \param[in]    cm             Top-level structure shared by encoder and
 * decoder
 * \param[in]    x              Pointer to structure holding the data for the
                                current encoding macroblock
 * \param[in]    w              Entropy coding write pointer
 * \param[in]    bsize          size of the current encoding macroblock
 */
void av1_write_intra_coeffs_mb(const AV1_COMMON *const cm, MACROBLOCK *x,
                               aom_writer *w, BLOCK_SIZE bsize);
/*!\cond */
int av1_get_txb_entropy_context(const tran_low_t *qcoeff,
                                const SCAN_ORDER *scan_order, int eob);
void av1_update_txb_context(const AV1_COMP *cpi, ThreadData *td,
                            RUN_TYPE dry_run, BLOCK_SIZE bsize,
                            uint8_t allow_update_cdf);
void av1_update_and_record_txb_context(int plane, int block, int blk_row,
                                       int blk_col, BLOCK_SIZE plane_bsize,
                                       TX_SIZE tx_size, void *arg);
#if CONFIG_HTB_TRELLIS
void hbt_destroy();
#endif  // CONFIG_HTB_TRELLIS

/*!\endcond */
/*!\brief Adjust the magnitude of quantized coefficients to achieve better
 * rate-distortion (RD) trade-off.
 *
 * \ingroup coefficient_coding
 *
 * This function goes through each coefficient and greedily choose to lower
 * the coefficient magnitude by 1 or not based on the RD score.
 *
 * The coefficients are processing in reversed scan order.
 *
 * Note that, the end of block position (eob) may change if the original last
 * coefficient is lowered to zero.
 *
 * \param[in]    cpi            Top-level encoder structure
 * \param[in]    x              Pointer to structure holding the data for the
                                current encoding macroblock
 * \param[in]    plane          The index of the current plane
 * \param[in]    block          The index of the current transform block in the
 * \param[in]    tx_size        The transform size
 * \param[in]    tx_type        The transform type
 * \param[in]    txb_ctx        Context info for entropy coding transform block
 * skip flag (tx_skip) and the sign of DC coefficient (dc_sign).
 * \param[out]   rate_cost      The entropy cost of coding the transform block
 * after adjustment of coefficients.
 * \param[in]    sharpness      When sharpness == 1, the function will be less
 * aggresive toward lowering the magnitude of coefficients.
 * In this way, the transform block will contain more high-frequency
 coefficients
 * and therefore preserve the sharpness of the reconstructed block.
 * \param[in]    fast_mode      Faster mode
 */
int av1_optimize_txb_new(const struct AV1_COMP *cpi, MACROBLOCK *x, int plane,
                         int block, TX_SIZE tx_size, TX_TYPE tx_type,
                         const TXB_CTX *const txb_ctx, int *rate_cost,
                         int sharpness, int fast_mode);
/*!\cond */

CB_COEFF_BUFFER *av1_get_cb_coeff_buffer(const struct AV1_COMP *cpi, int mi_row,
                                         int mi_col);
/*!\endcond */

/*!\brief Returns the entropy cost associated with skipping the current
 * transform block.
 *
 * \ingroup coefficient_coding
 *
 * \param[in]    coeff_costs    Table of entropy cost for coefficient coding.
 * \param[in]    txb_ctx        Context info for entropy coding transform block
 * skip flag (tx_skip) and the sign of DC coefficient (dc_sign).
 * \param[in]    plane          The index of the current plane
 * \param[in]    tx_size        The transform size
 */
static INLINE int av1_cost_skip_txb(const CoeffCosts *coeff_costs,
                                    const TXB_CTX *const txb_ctx, int plane,
                                    TX_SIZE tx_size) {
  const TX_SIZE txs_ctx = get_txsize_entropy_ctx(tx_size);
  const PLANE_TYPE plane_type = get_plane_type(plane);
  const LV_MAP_COEFF_COST *const coeff_costs_ =
      &coeff_costs->coeff_costs[txs_ctx][plane_type];
  return coeff_costs_->txb_skip_cost[txb_ctx->txb_skip_ctx][1];
}

/*!\cond */
// These numbers are empirically obtained.
static const int plane_rd_mult[REF_TYPES][PLANE_TYPES] = {
  { 17, 13 },
  { 16, 10 },
};
/*!\endcond */

#ifdef __cplusplus
}
#endif

#endif  // AOM_AV1_ENCODER_ENCODETXB_H_