| # |
| # Copyright (c) 2016, Alliance for Open Media. All rights reserved |
| # |
| # This source code is subject to the terms of the BSD 2 Clause License and the |
| # Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License was |
| # not distributed with this source code in the LICENSE file, you can obtain it |
| # at www.aomedia.org/license/software. If the Alliance for Open Media Patent |
| # License 1.0 was not distributed with this source code in the PATENTS file, you |
| # can obtain it at www.aomedia.org/license/patent. |
| |
| include("${AOM_ROOT}/build/cmake/util.cmake") |
| |
| # This file sets default values for libaom configuration variables. All libaom |
| # config variables are added to the CMake variable cache via the macros provided |
| # in util.cmake. |
| |
| # |
| # The variables in this section of the file are detected at configuration time, |
| # but can be overridden via the use of CONFIG_* and ENABLE_* values also defined |
| # in this file. |
| # |
| |
| set_aom_detect_var(INLINE "" "Sets INLINE value for current target.") |
| |
| # CPUs. |
| set_aom_detect_var(ARCH_ARM 0 "Enables ARM architecture.") |
| set_aom_detect_var(ARCH_MIPS 0 "Enables MIPS architecture.") |
| set_aom_detect_var(ARCH_PPC 0 "Enables PPC architecture.") |
| set_aom_detect_var(ARCH_X86 0 "Enables X86 architecture.") |
| set_aom_detect_var(ARCH_X86_64 0 "Enables X86_64 architecture.") |
| |
| # ARM feature flags. |
| set_aom_detect_var(HAVE_NEON 0 "Enables NEON intrinsics optimizations.") |
| |
| # MIPS feature flags. |
| set_aom_detect_var(HAVE_DSPR2 0 "Enables DSPR2 optimizations.") |
| set_aom_detect_var(HAVE_MIPS32 0 "Enables MIPS32 optimizations.") |
| set_aom_detect_var(HAVE_MIPS64 0 "Enables MIPS64 optimizations. ") |
| set_aom_detect_var(HAVE_MSA 0 "Enables MSA optimizations.") |
| |
| # PPC feature flags. |
| set_aom_detect_var(HAVE_VSX 0 "Enables VSX optimizations.") |
| |
| # x86/x86_64 feature flags. |
| set_aom_detect_var(HAVE_AVX 0 "Enables AVX optimizations.") |
| set_aom_detect_var(HAVE_AVX2 0 "Enables AVX2 optimizations.") |
| set_aom_detect_var(HAVE_MMX 0 "Enables MMX optimizations. ") |
| set_aom_detect_var(HAVE_SSE 0 "Enables SSE optimizations.") |
| set_aom_detect_var(HAVE_SSE2 0 "Enables SSE2 optimizations.") |
| set_aom_detect_var(HAVE_SSE3 0 "Enables SSE3 optimizations.") |
| set_aom_detect_var(HAVE_SSE4_1 0 "Enables SSE 4.1 optimizations.") |
| set_aom_detect_var(HAVE_SSE4_2 0 "Enables SSE 4.2 optimizations.") |
| set_aom_detect_var(HAVE_SSSE3 0 "Enables SSSE3 optimizations.") |
| |
| # Flags describing the build environment. |
| set_aom_detect_var(HAVE_FEXCEPT 0 |
| "Internal flag, GNU fenv.h present for target.") |
| set_aom_detect_var(HAVE_PTHREAD_H 0 "Internal flag, target pthread support.") |
| set_aom_detect_var(HAVE_UNISTD_H 0 |
| "Internal flag, unistd.h present for target.") |
| set_aom_detect_var(HAVE_WXWIDGETS 0 "WxWidgets present.") |
| |
| # |
| # Variables in this section can be set from the CMake command line or from |
| # within the CMake GUI. The variables control libaom features. |
| # |
| |
| # Build configuration flags. |
| set_aom_config_var(AOM_RTCD_FLAGS "" |
| "Arguments to pass to rtcd.pl. Separate with ';'") |
| set_aom_config_var(CONFIG_AV1_DECODER 1 "Enable AV1 decoder.") |
| set_aom_config_var(CONFIG_AV1_ENCODER 1 "Enable AV1 encoder.") |
| set_aom_config_var(CONFIG_BIG_ENDIAN 0 "Internal flag.") |
| set_aom_config_var(CONFIG_GCC 0 "Building with GCC (detect).") |
| set_aom_config_var(CONFIG_GCOV 0 "Enable gcov support.") |
| set_aom_config_var(CONFIG_GPROF 0 "Enable gprof support.") |
| set_aom_config_var(CONFIG_LIBYUV 1 "Enables libyuv scaling/conversion support.") |
| |
| set_aom_config_var(CONFIG_MULTITHREAD 1 "Multithread support.") |
| set_aom_config_var(CONFIG_OS_SUPPORT 0 "Internal flag.") |
| set_aom_config_var(CONFIG_PIC 0 "Build with PIC enabled.") |
| set_aom_config_var(CONFIG_RUNTIME_CPU_DETECT 1 "Runtime CPU detection support.") |
| set_aom_config_var(CONFIG_SHARED 0 "Build shared libs.") |
| set_aom_config_var(CONFIG_STATIC 1 "Build static libs.") |
| set_aom_config_var(CONFIG_WEBM_IO 1 "Enables WebM support.") |
| |
| # Debugging flags. |
| set_aom_config_var(CONFIG_BITSTREAM_DEBUG 0 "Bitstream debugging flag.") |
| set_aom_config_var(CONFIG_DEBUG 0 "Debug build flag.") |
| set_aom_config_var(CONFIG_MISMATCH_DEBUG 0 "Mismatch debugging flag.") |
| |
| # AV1 feature flags. |
| set_aom_config_var(CONFIG_ACCOUNTING 0 "Enables bit accounting.") |
| set_aom_config_var(CONFIG_ANALYZER 0 "Enables bit stream analyzer.") |
| set_aom_config_var(CONFIG_COEFFICIENT_RANGE_CHECKING 0 |
| "Coefficient range check.") |
| set_aom_config_var(CONFIG_DENOISE 1 |
| "Denoise/noise modeling support in encoder.") |
| set_aom_config_var(CONFIG_FILEOPTIONS 1 "Enables encoder config file support.") |
| set_aom_config_var(CONFIG_INSPECTION 0 "Enables bitstream inspection.") |
| set_aom_config_var(CONFIG_INTERNAL_STATS 0 "Enables internal encoder stats.") |
| set_aom_config_var(FORCE_HIGHBITDEPTH_DECODING 0 |
| "Force high bitdepth decoding pipeline on 8-bit input.") |
| mark_as_advanced(FORCE_HIGHBITDEPTH_DECODING) |
| set_aom_config_var(CONFIG_MAX_DECODE_PROFILE 2 |
| "Max profile to support decoding.") |
| set_aom_config_var(CONFIG_NORMAL_TILE_MODE 0 "Only enables normal tile mode.") |
| set_aom_config_var(CONFIG_SIZE_LIMIT 0 "Limit max decode width/height.") |
| set_aom_config_var(CONFIG_SPATIAL_RESAMPLING 1 "Spatial resampling.") |
| set_aom_config_var(DECODE_HEIGHT_LIMIT 0 "Set limit for decode height.") |
| set_aom_config_var(DECODE_WIDTH_LIMIT 0 "Set limit for decode width.") |
| |
| # Misc flags |
| set_aom_config_var(CONFIG_SPEED_STATS 0 "AV1 experiment flag.") |
| set_aom_config_var(CONFIG_COLLECT_RD_STATS 0 "AV1 experiment flag.") |
| set_aom_config_var(CONFIG_DIST_8X8 0 "AV1 experiment flag.") |
| set_aom_config_var(CONFIG_ENTROPY_STATS 0 "AV1 experiment flag.") |
| set_aom_config_var(CONFIG_INTER_STATS_ONLY 0 "AV1 experiment flag.") |
| set_aom_config_var(CONFIG_RD_DEBUG 0 "AV1 experiment flag.") |
| set_aom_config_var(CONFIG_SHARP_SETTINGS 0 "AV1 experiment flag.") |
| set_aom_config_var(CONFIG_DISABLE_FULL_PIXEL_SPLIT_8X8 1 |
| "Disable full_pixel_motion_search_based_split on BLOCK_8X8.") |
| set_aom_config_var(CONFIG_COLLECT_PARTITION_STATS 0 |
| "Collect stats on partition decisions.") |
| set_aom_config_var(CONFIG_COLLECT_COMPONENT_TIMING 0 |
| "Collect encoding component timing information.") |
| set_aom_config_var(CONFIG_COLLECT_FRAME_INFO 0 |
| "Collect frame info with quantization indices.") |
| |
| # AV2 experiment flags |
| set_aom_config_var(CONFIG_ADAPT_FILTER_INTRA 0 NUMBER "AV2 experiment flag.") |
| set_aom_config_var(CONFIG_MODE_DEP_INTRA_TX 0 NUMBER "AV2 experiment flag.") |
| set_aom_config_var(CONFIG_MODE_DEP_INTER_TX 0 NUMBER "AV2 experiment flag.") |
| set_aom_config_var(CONFIG_MODE_DEP_NONSEP_INTRA_TX 0 NUMBER |
| "AV2 experiment flag for nonsep mode-dep intra tx.") |
| set_aom_config_var(CONFIG_MODE_DEP_NONSEP_SEC_INTRA_TX 0 NUMBER |
| "AV2 experiment flag for sec mode-dep intra tx.") |
| set_aom_config_var(CONFIG_DST7_16X16 0 NUMBER "AV2 DST7 16x16 experiment flag.") |
| set_aom_config_var(CONFIG_DST_32X32 0 NUMBER "AV2 DST7 32x32 experiment flag.") |
| set_aom_config_var(CONFIG_LGT 0 NUMBER "AV2 LGT experiment flag.") |
| set_aom_config_var(CONFIG_LGT32 0 NUMBER "AV2 LGT 32x32 experiment flag.") |
| |
| set_aom_config_var(CONFIG_CFL_SEARCH_VERSION_1_SIMPLIFIED 0 NUMBER |
| "AV2 experiment flag for CfL search version 1 simplified.") |
| |
| set_aom_config_var(CONFIG_CNN_RESTORATION 0 NUMBER |
| "AV2 CNN Restoration experiment flag") |
| set_aom_config_var(CONFIG_LOOP_RESTORE_CNN 0 NUMBER |
| "AV2 CNN in Loop Restoration experiment flag") |
| set_aom_config_var(CONFIG_CNN_RESTORATION_SMALL_MODELS 0 NUMBER |
| "AV2 CNN restoration with smaller models experiment flag") |
| set_aom_config_var(CONFIG_CNN_CRLC_GUIDED 0 NUMBER |
| "AV2 CNN restoration with CRLC models experiment flag") |
| |
| set_aom_config_var(CONFIG_FLEX_PARTITION 0 NUMBER |
| "AV2 Flexible partition experiment flag") |
| set_aom_config_var(CONFIG_EXT_RECUR_PARTITIONS 0 NUMBER |
| "AV2 Fully recursive partitions experiment flag") |
| set_aom_config_var(CONFIG_INTRA_ENTROPY 0 NUMBER |
| "AV2 intra mode entropy coding experiment flag") |
| set_aom_config_var(CONFIG_USE_SMALL_MODEL 1 NUMBER |
| "AV2 intra mode entropy coding experiment flag") |
| set_aom_config_var(CONFIG_DERIVED_INTRA_MODE 0 NUMBER |
| "AV2 derived intra mode experiment flag") |
| set_aom_config_var(CONFIG_DERIVED_MV 0 NUMBER |
| "AV2 derived motion vector experiment flag") |
| set_aom_config_var(CONFIG_DERIVED_MV_NO_PD 1 NUMBER |
| "AV2 derived MV without parsing dependency experiment flag") |
| set_aom_config_var(CONFIG_SKIP_INTERP_FILTER 0 NUMBER |
| "AV2 experiment to skip interp filter signaling for" |
| "full pel MV") |
| set_aom_config_var(CONFIG_NEW_TX_PARTITION 0 NUMBER |
| "AV2 new transform partitions experiment flag") |
| set_aom_config_var(CONFIG_OPTFLOW_REFINEMENT 0 NUMBER |
| "AV2 optical flow based MV refinement experiment flag") |
| set_aom_config_var(CONFIG_EXT_COMPOUND_REFMV 0 NUMBER |
| "AV2 extended compound refmv modes experiment flag") |
| set_aom_config_var(CONFIG_FLEX_MVRES 0 NUMBER |
| "AV2 Flexible MV resolution experiment flag") |
| set_aom_config_var(CONFIG_SB_FLEX_MVRES 0 NUMBER |
| "AV2 SB-level Flexible MV resolution experiment flag") |
| set_aom_config_var(CONFIG_PB_FLEX_MVRES 0 NUMBER |
| "AV2 PB-level Flexible MV resolution experiment flag") |
| set_aom_config_var(CONFIG_CTX_ADAPT_LOG_WEIGHT 0 NUMBER |
| "AV2 Laplace of Gaussian experiment flag") |
| set_aom_config_var(CONFIG_MISC_CHANGES 0 NUMBER |
| "AV2 miscellaneous bitstream changes experiment flag") |
| set_aom_config_var(CONFIG_ENTROPY_CONTEXTS 0 NUMBER |
| "AV2 entropy coding contexts experiment flag") |
| set_aom_config_var(CONFIG_EXT_IBC_MODES 0 NUMBER |
| "AV2 enhanced IBC coding modes experiment flag") |
| set_aom_config_var(CONFIG_WIENER_NONSEP 0 NUMBER |
| "AV2 nonsep Wiener filter experiment flag") |
| set_aom_config_var(CONFIG_WIENER_NONSEP_CROSS_FILT 0 NUMBER |
| "AV2 nonsep Wiener cross filter experiment flag") |
| set_aom_config_var(CONFIG_SUPERRES_TX64 0 NUMBER |
| "AV2 64-length superres tx experiment flag") |
| set_aom_config_var(CONFIG_SUPERRES_TX64_DIRFILTER 0 NUMBER |
| "AV2 64-length superres tx w/ dir filter experiment flag") |
| set_aom_config_var(CONFIG_SUPERRES_TX64_TRAINING_DATA 0 NUMBER |
| "AV2 64-length superres tx training data generation") |
| set_aom_config_var(CONFIG_SUPERRES_TX64 0 NUMBER |
| "AV2 64-length superres tx experiment flag") |
| set_aom_config_var(CONFIG_SUPERRES_EXT 0 NUMBER |
| "AV2 superres mode extensions experiment flag") |
| set_aom_config_var(CONFIG_DIFFWTD_42 0 NUMBER |
| "AV2 diffwtd mask experiment flag") |
| set_aom_config_var(CONFIG_ILLUM_MCOMP 0 NUMBER |
| "AV2 illumination compensation motion estimation flag") |
| set_aom_config_var(CONFIG_COMPANDED_MV 0 NUMBER |
| "AV2 companded MV experiment flag") |
| set_aom_config_var(CONFIG_NEW_INTER_MODES 0 NUMBER |
| "AV2 inter mode consolidation experiment flag") |
| set_aom_config_var(CONFIG_WIENER_SEP_HIPREC 0 NUMBER |
| "AV2 high-prec separable Wiener filter experiment flag") |
| set_aom_config_var(CONFIG_EXTQUANT 0 NUMBER |
| "AV2 extended quantization experiment flag") |
| set_aom_config_var(CONFIG_DBLK_TXSKIP 0 NUMBER |
| "AV2 deblock based on transform skip experiment flag") |
| set_aom_config_var(CONFIG_SEGMENT_BASED_PARTITIONING 0 NUMBER |
| "AV2 segment based partitioning experiment flag") |
| set_aom_config_var(CONFIG_EXT_WARP 0 NUMBER |
| "AV2 extension to warp experiment flag") |
| set_aom_config_var(CONFIG_GM_MODEL_CODING 0 NUMBER |
| "AV2 global motion model compression flag") |
| set_aom_config_var(CONFIG_SUB8X8_WARP 0 NUMBER |
| "AV2 experiment flag for enabling sub-8x8 warp") |
| set_aom_config_var(CONFIG_ENHANCED_WARPED_MOTION 0 NUMBER |
| "AV2 enhanced warped motion experiment flag") |
| set_aom_config_var(CONFIG_DUMP_MFQE_DATA 0 NUMBER |
| "AV2 in-loop MFQE experiment flag") |
| set_aom_config_var(CONFIG_INTERINTRA_BORDER 0 NUMBER |
| "Calculate an extended border for interintra prediction") |
| set_aom_config_var(CONFIG_DSPL_RESIDUAL 0 NUMBER |
| "AV2 partition-level residual downsampling experiment flag") |
| set_aom_config_var(CONFIG_NN_RECON 0 NUMBER |
| "AV2 nn-base txfm reconstruction experiment flag") |
| set_aom_config_var(CONFIG_INTERINTRA_ML 0 NUMBER |
| "AV2 ML-based interintra reconstruction experiment flag") |
| set_aom_config_var(CONFIG_INTERINTRA_ML_DATA_COLLECT 0 NUMBER |
| "AV2 ML-based interintra data collection flag") |
| set_aom_config_var(CONFIG_MFQE_RESTORATION 0 NUMBER |
| "AV2 multi-frame quality enhancement experiment flag") |
| set_aom_config_var(CONFIG_EXT_REFMV 0 NUMBER |
| "AV2 new mv generation for better encoding estimation") |
| set_aom_config_var(CONFIG_DBSCAN_FEATURE 0 NUMBER |
| "AV2 dbscan clustering for mv reduction") |
| set_aom_config_var(CONFIG_EXT_COMP_REFMV 0 NUMBER |
| "AV2 extended compound ref MV experiment flag") |
| set_aom_config_var(CONFIG_REF_MV_BANK 0 NUMBER |
| "AV2 ref mv bank experiment flag") |
| set_aom_config_var( |
| CONFIG_RST_MERGECOEFFS 0 NUMBER |
| "AV2 in-loop restoration merging coefficients experiment flag") |
| |
| # To include Tensorflow, make sure to build tensorflow locally using |
| # tensorflow/contrib/makefile/build_all_linux.sh and then providing the correct |
| # path to tensorflow root via TENSORFLOW_INCLUDE_DIR. |
| set_aom_config_var(CONFIG_TENSORFLOW 0 NUMBER "AV2 TF experiment flag.") |
| |
| # If enabled, compiles / links TensorFlow lite from third_party |
| set_aom_config_var(CONFIG_TENSORFLOW_LITE 0 NUMBER |
| "AV2 TF Lite experiment flag.") |
| |
| set_aom_config_var(CONFIG_LPF_MASK 0 NUMBER |
| "Enable the use loop filter bitmasks for optimizations.") |
| set_aom_config_var(CONFIG_HTB_TRELLIS 0 NUMBER |
| "Enable the use of hash table for trellis optimizations.") |
| set_aom_config_var(CONFIG_REALTIME_ONLY 0 NUMBER |
| "Build for RTC-only to reduce binary size.") |
| |
| set_aom_config_var(CONFIG_AV1_HIGHBITDEPTH 1 NUMBER |
| "Build with high bitdepth support.") |
| set_aom_config_var(CONFIG_NN_V2 0 NUMBER "Fully-connected neural nets ver.2.") |
| set_aom_config_var(CONFIG_SUPERRES_IN_RECODE 1 NUMBER |
| "Enable encoding both full-res and superres in recode loop" |
| "when SUPERRES_AUTO mode is used.") |
| # |
| # Variables in this section control optional features of the build system. |
| # |
| set_aom_option_var(ENABLE_CCACHE "Enable ccache support." OFF) |
| set_aom_option_var(ENABLE_DECODE_PERF_TESTS "Enables decoder performance tests" |
| OFF) |
| set_aom_option_var(ENABLE_DISTCC "Enable distcc support." OFF) |
| set_aom_option_var(ENABLE_DOCS |
| "Enable documentation generation (doxygen required)." ON) |
| set_aom_option_var(ENABLE_ENCODE_PERF_TESTS "Enables encoder performance tests" |
| OFF) |
| set_aom_option_var(ENABLE_EXAMPLES "Enables build of example code." ON) |
| set_aom_option_var(ENABLE_GOMA "Enable goma support." OFF) |
| set_aom_option_var( |
| ENABLE_IDE_TEST_HOSTING |
| "Enables running tests within IDEs like Visual Studio and Xcode." OFF) |
| set_aom_option_var(ENABLE_NASM "Use nasm instead of yasm for x86 assembly." OFF) |
| set_aom_option_var(ENABLE_TESTDATA "Enables unit test data download targets." |
| ON) |
| set_aom_option_var(ENABLE_TESTS "Enables unit tests." ON) |
| set_aom_option_var(ENABLE_TOOLS "Enable applications in tools sub directory." |
| ON) |
| set_aom_option_var(ENABLE_WERROR "Converts warnings to errors at compile time." |
| OFF) |
| |
| # ARM assembly/intrinsics flags. |
| set_aom_option_var(ENABLE_NEON "Enables NEON optimizations on ARM targets." ON) |
| |
| # MIPS assembly/intrinsics flags. |
| set_aom_option_var(ENABLE_DSPR2 "Enables DSPR2 optimizations on MIPS targets." |
| OFF) |
| set_aom_option_var(ENABLE_MSA "Enables MSA optimizations on MIPS targets." OFF) |
| |
| # VSX intrinsics flags. |
| set_aom_option_var(ENABLE_VSX "Enables VSX optimizations on PowerPC targets." |
| ON) |
| |
| # x86/x86_64 assembly/intrinsics flags. |
| set_aom_option_var(ENABLE_MMX "Enables MMX optimizations on x86/x86_64 targets." |
| ON) |
| set_aom_option_var(ENABLE_SSE "Enables SSE optimizations on x86/x86_64 targets." |
| ON) |
| set_aom_option_var(ENABLE_SSE2 |
| "Enables SSE2 optimizations on x86/x86_64 targets." ON) |
| set_aom_option_var(ENABLE_SSE3 |
| "Enables SSE3 optimizations on x86/x86_64 targets." ON) |
| set_aom_option_var(ENABLE_SSSE3 |
| "Enables SSSE3 optimizations on x86/x86_64 targets." ON) |
| set_aom_option_var(ENABLE_SSE4_1 |
| "Enables SSE4_1 optimizations on x86/x86_64 targets." ON) |
| set_aom_option_var(ENABLE_SSE4_2 |
| "Enables SSE4_2 optimizations on x86/x86_64 targets." ON) |
| set_aom_option_var(ENABLE_AVX "Enables AVX optimizations on x86/x86_64 targets." |
| ON) |
| set_aom_option_var(ENABLE_AVX2 |
| "Enables AVX2 optimizations on x86/x86_64 targets." ON) |
