blob: c087106060cc9e5dcfcb2f655df48ce7957c3e38 [file] [log] [blame] [edit]
#!/bin/sh
## Copyright (c) 2016, Alliance for Open Media. All rights reserved
##
## This source code is subject to the terms of the BSD 2 Clause License and
## the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License
## was not distributed with this source code in the LICENSE file, you can
## obtain it at www.aomedia.org/license/software. If the Alliance for Open
## Media Patent License 1.0 was not distributed with this source code in the
## PATENTS file, you can obtain it at www.aomedia.org/license/patent.
##
## This file contains shell code shared by test scripts for libaom tools.
# Use $AOM_TEST_TOOLS_COMMON_SH as a pseudo include guard.
if [ -z "${AOM_TEST_TOOLS_COMMON_SH}" ]; then
AOM_TEST_TOOLS_COMMON_SH=included
set -e
devnull='> /dev/null 2>&1'
AOM_TEST_PREFIX=""
elog() {
echo "$@" 1>&2
}
vlog() {
if [ "${AOM_TEST_VERBOSE_OUTPUT}" = "yes" ]; then
echo "$@"
fi
}
# Sets $AOM_TOOL_TEST to the name specified by positional parameter one.
test_begin() {
AOM_TOOL_TEST="${1}"
}
# Clears the AOM_TOOL_TEST variable after confirming that $AOM_TOOL_TEST matches
# positional parameter one.
test_end() {
if [ "$1" != "${AOM_TOOL_TEST}" ]; then
echo "FAIL completed test mismatch!."
echo " completed test: ${1}"
echo " active test: ${AOM_TOOL_TEST}."
return 1
fi
AOM_TOOL_TEST='<unset>'
}
# Echoes the target configuration being tested.
test_configuration_target() {
aom_config_c="${LIBAOM_CONFIG_PATH}/config/aom_config.c"
# Clean up the cfg pointer line from aom_config.c for easier re-use by
# someone examining a failure in the example tests.
# 1. Run grep on aom_config.c for cfg and limit the results to 1.
# 2. Split the line using ' = ' as separator.
# 3. Abuse sed to consume the leading " and trailing "; from the assignment
# to the cfg pointer.
cmake_config=$(awk -F ' = ' '/cfg/ { print $NF; exit }' "${aom_config_c}" \
| sed -e s/\"// -e s/\"\;//)
echo cmake generated via command: cmake path/to/aom ${cmake_config}
}
# Trap function used for failure reports and tool output directory removal.
# When the contents of $AOM_TOOL_TEST do not match the string '<unset>', reports
# failure of test stored in $AOM_TOOL_TEST.
cleanup() {
if [ -n "${AOM_TOOL_TEST}" ] && [ "${AOM_TOOL_TEST}" != '<unset>' ]; then
echo "FAIL: $AOM_TOOL_TEST"
fi
if [ "${AOM_TEST_PRESERVE_OUTPUT}" = "yes" ]; then
return
fi
if [ -n "${AOM_TEST_OUTPUT_DIR}" ] && [ -d "${AOM_TEST_OUTPUT_DIR}" ]; then
rm -rf "${AOM_TEST_OUTPUT_DIR}"
fi
}
# Echoes the version string assigned to the VERSION_STRING_NOSP variable defined
# in $LIBAOM_CONFIG_PATH/config/aom_version.h to stdout.
cmake_version() {
aom_version_h="${LIBAOM_CONFIG_PATH}/config/aom_version.h"
# Find VERSION_STRING_NOSP line, split it with '"' and print the next to last
# field to output the version string to stdout.
aom_version=$(awk -F \" '/VERSION_STRING_NOSP/ {print $(NF-1)}' \
"${aom_version_h}")
echo "v${aom_version}"
}
# Echoes current git version as reported by running 'git describe', or the
# version used by the cmake build when git is unavailable.
source_version() {
if git --version > /dev/null 2>&1; then
(cd "$(dirname "${0}")"
git describe)
else
cmake_version
fi
}
# Echoes warnings to stdout when source version and CMake build generated
# version are out of sync.
check_version_strings() {
cmake_version=$(cmake_version)
source_version=$(source_version)
if [ "${cmake_version}" != "${source_version}" ]; then
echo "Warning: version has changed since last cmake run."
vlog " cmake version: ${cmake_version} version now: ${source_version}"
fi
}
# $1 is the name of an environment variable containing a directory name to
# test.
test_env_var_dir() {
local dir=$(eval echo "\${$1}")
if [ ! -d "${dir}" ]; then
elog "'${dir}': No such directory"
elog "The $1 environment variable must be set to a valid directory."
return 1
fi
}
# This script requires that the LIBAOM_BIN_PATH, LIBAOM_CONFIG_PATH, and
# LIBAOM_TEST_DATA_PATH variables are in the environment: Confirm that
# the variables are set and that they all evaluate to directory paths.
verify_aom_test_environment() {
test_env_var_dir "LIBAOM_BIN_PATH" \
&& test_env_var_dir "LIBAOM_CONFIG_PATH" \
&& test_env_var_dir "LIBAOM_TEST_DATA_PATH"
}
# Greps aom_config.h in LIBAOM_CONFIG_PATH for positional parameter one, which
# should be a LIBAOM preprocessor flag. Echoes yes to stdout when the feature
# is available.
aom_config_option_enabled() {
aom_config_option="${1}"
aom_config_file="${LIBAOM_CONFIG_PATH}/config/aom_config.h"
config_line=$(grep "${aom_config_option}" "${aom_config_file}")
if echo "${config_line}" | egrep -q '1$'; then
echo yes
fi
}
# Echoes yes when output of test_configuration_target() contains win32 or win64.
is_windows_target() {
if test_configuration_target \
| grep -q -e win32 -e win64 > /dev/null 2>&1; then
echo yes
fi
}
# Echoes path to $1 when it's executable and exists in one of the directories
# included in $tool_paths, or an empty string. Caller is responsible for testing
# the string once the function returns.
aom_tool_path() {
local tool_name="$1"
local root_path="${LIBAOM_BIN_PATH}"
local suffix="${AOM_TEST_EXE_SUFFIX}"
local tool_paths="\
${root_path}/${tool_name}${suffix} \
${root_path}/../${tool_name}${suffix} \
${root_path}/tools/${tool_name}${suffix} \
${root_path}/../tools/${tool_name}${suffix}"
local toolpath=""
for tool_path in ${tool_paths}; do
if [ -x "${tool_path}" ] && [ -f "${tool_path}" ]; then
echo "${tool_path}"
return 0
fi
done
return 1
}
# Echoes yes to stdout when the file named by positional parameter one exists
# in LIBAOM_BIN_PATH, and is executable.
aom_tool_available() {
local tool_name="$1"
local tool="${LIBAOM_BIN_PATH}/${tool_name}${AOM_TEST_EXE_SUFFIX}"
[ -x "${tool}" ] && echo yes
}
# Echoes yes to stdout when aom_config_option_enabled() reports yes for
# CONFIG_AV1_DECODER.
av1_decode_available() {
[ "$(aom_config_option_enabled CONFIG_AV1_DECODER)" = "yes" ] && echo yes
}
# Echoes yes to stdout when aom_config_option_enabled() reports yes for
# CONFIG_AV1_ENCODER.
av1_encode_available() {
[ "$(aom_config_option_enabled CONFIG_AV1_ENCODER)" = "yes" ] && echo yes
}
# Echoes "fast" encode params for use with aomenc.
aomenc_encode_test_fast_params() {
echo "--cpu-used=1
--limit=${AV1_ENCODE_TEST_FRAME_LIMIT}
--lag-in-frames=0
--test-decode=fatal"
}
# Echoes yes to stdout when aom_config_option_enabled() reports yes for
# CONFIG_WEBM_IO.
webm_io_available() {
[ "$(aom_config_option_enabled CONFIG_WEBM_IO)" = "yes" ] && echo yes
}
# Filters strings from $1 using the filter specified by $2. Filter behavior
# depends on the presence of $3. When $3 is present, strings that match the
# filter are excluded. When $3 is omitted, strings matching the filter are
# included.
# The filtered result is echoed to stdout.
filter_strings() {
strings=${1}
filter=${2}
exclude=${3}
if [ -n "${exclude}" ]; then
# When positional parameter three exists the caller wants to remove strings.
# Tell grep to invert matches using the -v argument.
exclude='-v'
else
unset exclude
fi
if [ -n "${filter}" ]; then
for s in ${strings}; do
if echo "${s}" | egrep -q ${exclude} "${filter}" > /dev/null 2>&1; then
filtered_strings="${filtered_strings} ${s}"
fi
done
else
filtered_strings="${strings}"
fi
echo "${filtered_strings}"
}
# Runs user test functions passed via positional parameters one and two.
# Functions in positional parameter one are treated as environment verification
# functions and are run unconditionally. Functions in positional parameter two
# are run according to the rules specified in aom_test_usage().
run_tests() {
local env_tests="verify_aom_test_environment $1"
local tests_to_filter="$2"
local test_name="${AOM_TEST_NAME}"
if [ -z "${test_name}" ]; then
test_name="$(basename "${0%.*}")"
fi
if [ "${AOM_TEST_RUN_DISABLED_TESTS}" != "yes" ]; then
# Filter out DISABLED tests.
tests_to_filter=$(filter_strings "${tests_to_filter}" ^DISABLED exclude)
fi
if [ -n "${AOM_TEST_FILTER}" ]; then
# Remove tests not matching the user's filter.
tests_to_filter=$(filter_strings "${tests_to_filter}" ${AOM_TEST_FILTER})
fi
# User requested test listing: Dump test names and return.
if [ "${AOM_TEST_LIST_TESTS}" = "yes" ]; then
for test_name in $tests_to_filter; do
echo ${test_name}
done
return
fi
# Don't bother with the environment tests if everything else was disabled.
[ -z "${tests_to_filter}" ] && return
# Combine environment and actual tests.
local tests_to_run="${env_tests} ${tests_to_filter}"
check_version_strings
# Run tests.
for test in ${tests_to_run}; do
test_begin "${test}"
vlog " RUN ${test}"
"${test}"
vlog " PASS ${test}"
test_end "${test}"
done
local tested_config="$(test_configuration_target) @ $(source_version)"
echo "${test_name}: Done, all tests pass for ${tested_config}."
}
aom_test_usage() {
cat << EOF
Usage: ${0##*/} [arguments]
--bin-path <path to libaom binaries directory>
--config-path <path to libaom config directory>
--filter <filter>: User test filter. Only tests matching filter are run.
--run-disabled-tests: Run disabled tests.
--help: Display this message and exit.
--test-data-path <path to libaom test data directory>
--show-program-output: Shows output from all programs being tested.
--prefix: Allows for a user specified prefix to be inserted before all test
programs. Grants the ability, for example, to run test programs
within valgrind.
--list-tests: List all test names and exit without actually running tests.
--verbose: Verbose output.
When the --bin-path option is not specified the script attempts to use
\$LIBAOM_BIN_PATH and then the current directory.
When the --config-path option is not specified the script attempts to use
\$LIBAOM_CONFIG_PATH and then the current directory.
When the -test-data-path option is not specified the script attempts to use
\$LIBAOM_TEST_DATA_PATH and then the current directory.
EOF
}
# Returns non-zero (failure) when required environment variables are empty
# strings.
aom_test_check_environment() {
if [ -z "${LIBAOM_BIN_PATH}" ] || \
[ -z "${LIBAOM_CONFIG_PATH}" ] || \
[ -z "${LIBAOM_TEST_DATA_PATH}" ]; then
return 1
fi
}
# Echo aomenc command line parameters allowing use of a raw yuv file as
# input to aomenc.
yuv_raw_input() {
echo ""${YUV_RAW_INPUT}"
--width="${YUV_RAW_INPUT_WIDTH}"
--height="${YUV_RAW_INPUT_HEIGHT}""
}
# Do a small encode for testing decoders.
encode_yuv_raw_input_av1() {
if [ "$(av1_encode_available)" = "yes" ]; then
local output="$1"
local encoder="$(aom_tool_path aomenc)"
shift
eval "${encoder}" $(yuv_raw_input) \
$(aomenc_encode_test_fast_params) \
--output="${output}" \
$@ \
${devnull}
if [ ! -e "${output}" ]; then
elog "Output file does not exist."
return 1
fi
fi
}
# Parse the command line.
while [ -n "$1" ]; do
case "$1" in
--bin-path)
LIBAOM_BIN_PATH="$2"
shift
;;
--config-path)
LIBAOM_CONFIG_PATH="$2"
shift
;;
--filter)
AOM_TEST_FILTER="$2"
shift
;;
--run-disabled-tests)
AOM_TEST_RUN_DISABLED_TESTS=yes
;;
--help)
aom_test_usage
exit
;;
--test-data-path)
LIBAOM_TEST_DATA_PATH="$2"
shift
;;
--prefix)
AOM_TEST_PREFIX="$2"
shift
;;
--verbose)
AOM_TEST_VERBOSE_OUTPUT=yes
;;
--show-program-output)
devnull=
;;
--list-tests)
AOM_TEST_LIST_TESTS=yes
;;
*)
aom_test_usage
exit 1
;;
esac
shift
done
# Handle running the tests from a build directory without arguments when running
# the tests on *nix/macosx.
LIBAOM_BIN_PATH="${LIBAOM_BIN_PATH:-.}"
LIBAOM_CONFIG_PATH="${LIBAOM_CONFIG_PATH:-.}"
LIBAOM_TEST_DATA_PATH="${LIBAOM_TEST_DATA_PATH:-.}"
# Create a temporary directory for output files, and a trap to clean it up.
if [ -n "${TMPDIR}" ]; then
AOM_TEST_TEMP_ROOT="${TMPDIR}"
elif [ -n "${TEMPDIR}" ]; then
AOM_TEST_TEMP_ROOT="${TEMPDIR}"
else
AOM_TEST_TEMP_ROOT=/tmp
fi
AOM_TEST_OUTPUT_DIR="${AOM_TEST_OUTPUT_DIR:-${AOM_TEST_TEMP_ROOT}/aom_test_$$}"
if ! mkdir -p "${AOM_TEST_OUTPUT_DIR}" || \
[ ! -d "${AOM_TEST_OUTPUT_DIR}" ]; then
echo "${0##*/}: Cannot create output directory, giving up."
echo "${0##*/}: AOM_TEST_OUTPUT_DIR=${AOM_TEST_OUTPUT_DIR}"
exit 1
fi
AOM_TEST_PRESERVE_OUTPUT=${AOM_TEST_PRESERVE_OUTPUT:-no}
if [ "$(is_windows_target)" = "yes" ]; then
AOM_TEST_EXE_SUFFIX=".exe"
fi
# Variables shared by tests.
AV1_ENCODE_CPU_USED=${AV1_ENCODE_CPU_USED:-1}
AV1_ENCODE_TEST_FRAME_LIMIT=${AV1_ENCODE_TEST_FRAME_LIMIT:-5}
AV1_IVF_FILE="${AV1_IVF_FILE:-${AOM_TEST_OUTPUT_DIR}/av1.ivf}"
AV1_OBU_ANNEXB_FILE="${AV1_OBU_ANNEXB_FILE:-${AOM_TEST_OUTPUT_DIR}/av1.annexb.obu}"
AV1_OBU_SEC5_FILE="${AV1_OBU_SEC5_FILE:-${AOM_TEST_OUTPUT_DIR}/av1.section5.obu}"
AV1_WEBM_FILE="${AV1_WEBM_FILE:-${AOM_TEST_OUTPUT_DIR}/av1.webm}"
YUV_RAW_INPUT="${LIBAOM_TEST_DATA_PATH}/hantro_collage_w352h288.yuv"
YUV_RAW_INPUT_WIDTH=352
YUV_RAW_INPUT_HEIGHT=288
Y4M_NOSQ_PAR_INPUT="${LIBAOM_TEST_DATA_PATH}/park_joy_90p_8_420_a10-1.y4m"
Y4M_720P_INPUT="${LIBAOM_TEST_DATA_PATH}/niklas_1280_720_30.y4m"
# Setup a trap function to clean up after tests complete.
trap cleanup EXIT
vlog "$(basename "${0%.*}") test configuration:
LIBAOM_BIN_PATH=${LIBAOM_BIN_PATH}
LIBAOM_CONFIG_PATH=${LIBAOM_CONFIG_PATH}
LIBAOM_TEST_DATA_PATH=${LIBAOM_TEST_DATA_PATH}
AOM_TEST_EXE_SUFFIX=${AOM_TEST_EXE_SUFFIX}
AOM_TEST_FILTER=${AOM_TEST_FILTER}
AOM_TEST_LIST_TESTS=${AOM_TEST_LIST_TESTS}
AOM_TEST_OUTPUT_DIR=${AOM_TEST_OUTPUT_DIR}
AOM_TEST_PREFIX=${AOM_TEST_PREFIX}
AOM_TEST_PRESERVE_OUTPUT=${AOM_TEST_PRESERVE_OUTPUT}
AOM_TEST_RUN_DISABLED_TESTS=${AOM_TEST_RUN_DISABLED_TESTS}
AOM_TEST_SHOW_PROGRAM_OUTPUT=${AOM_TEST_SHOW_PROGRAM_OUTPUT}
AOM_TEST_TEMP_ROOT=${AOM_TEST_TEMP_ROOT}
AOM_TEST_VERBOSE_OUTPUT=${AOM_TEST_VERBOSE_OUTPUT}
AV1_ENCODE_CPU_USED=${AV1_ENCODE_CPU_USED}
AV1_ENCODE_TEST_FRAME_LIMIT=${AV1_ENCODE_TEST_FRAME_LIMIT}
AV1_IVF_FILE=${AV1_IVF_FILE}
AV1_OBU_ANNEXB_FILE=${AV1_OBU_ANNEXB_FILE}
AV1_OBU_SEC5_FILE=${AV1_OBU_SEC5_FILE}
AV1_WEBM_FILE=${AV1_WEBM_FILE}
YUV_RAW_INPUT=${YUV_RAW_INPUT}
YUV_RAW_INPUT_WIDTH=${YUV_RAW_INPUT_WIDTH}
YUV_RAW_INPUT_HEIGHT=${YUV_RAW_INPUT_HEIGHT}
Y4M_NOSQ_PAR_INPUT=${Y4M_NOSQ_PAR_INPUT}"
fi # End $AOM_TEST_TOOLS_COMMON_SH pseudo include guard.