| /* |
| * Copyright (c) 2019, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 2 Clause License and |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License |
| * was not distributed with this source code in the LICENSE file, you can |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open |
| * Media Patent License 1.0 was not distributed with this source code in the |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. |
| */ |
| |
| #include <stdint.h> |
| #include <float.h> |
| |
| #include "av1/encoder/thirdpass.h" |
| #include "config/aom_config.h" |
| #include "config/aom_dsp_rtcd.h" |
| #include "config/aom_scale_rtcd.h" |
| |
| #include "aom/aom_codec.h" |
| |
| #include "av1/common/av1_common_int.h" |
| #include "av1/common/enums.h" |
| #include "av1/common/idct.h" |
| #include "av1/common/reconintra.h" |
| |
| #include "av1/encoder/encoder.h" |
| #include "av1/encoder/ethread.h" |
| #include "av1/encoder/encodeframe_utils.h" |
| #include "av1/encoder/encode_strategy.h" |
| #include "av1/encoder/hybrid_fwd_txfm.h" |
| #include "av1/encoder/motion_search_facade.h" |
| #include "av1/encoder/rd.h" |
| #include "av1/encoder/rdopt.h" |
| #include "av1/encoder/reconinter_enc.h" |
| #include "av1/encoder/tpl_model.h" |
| |
| static INLINE double exp_bounded(double v) { |
| // When v > 700 or <-700, the exp function will be close to overflow |
| // For details, see the "Notes" in the following link. |
| // https://en.cppreference.com/w/c/numeric/math/exp |
| if (v > 700) { |
| return DBL_MAX; |
| } else if (v < -700) { |
| return 0; |
| } |
| return exp(v); |
| } |
| |
| void av1_init_tpl_txfm_stats(TplTxfmStats *tpl_txfm_stats) { |
| tpl_txfm_stats->ready = 0; |
| tpl_txfm_stats->coeff_num = 256; |
| tpl_txfm_stats->txfm_block_count = 0; |
| memset(tpl_txfm_stats->abs_coeff_sum, 0, |
| sizeof(tpl_txfm_stats->abs_coeff_sum[0]) * tpl_txfm_stats->coeff_num); |
| memset(tpl_txfm_stats->abs_coeff_mean, 0, |
| sizeof(tpl_txfm_stats->abs_coeff_mean[0]) * tpl_txfm_stats->coeff_num); |
| } |
| |
| void av1_accumulate_tpl_txfm_stats(const TplTxfmStats *sub_stats, |
| TplTxfmStats *accumulated_stats) { |
| accumulated_stats->txfm_block_count += sub_stats->txfm_block_count; |
| for (int i = 0; i < accumulated_stats->coeff_num; ++i) { |
| accumulated_stats->abs_coeff_sum[i] += sub_stats->abs_coeff_sum[i]; |
| } |
| } |
| |
| void av1_record_tpl_txfm_block(TplTxfmStats *tpl_txfm_stats, |
| const tran_low_t *coeff) { |
| // For transform larger than 16x16, the scale of coeff need to be adjusted. |
| // It's not LOSSLESS_Q_STEP. |
| assert(tpl_txfm_stats->coeff_num <= 256); |
| for (int i = 0; i < tpl_txfm_stats->coeff_num; ++i) { |
| tpl_txfm_stats->abs_coeff_sum[i] += abs(coeff[i]) / (double)LOSSLESS_Q_STEP; |
| } |
| ++tpl_txfm_stats->txfm_block_count; |
| } |
| |
| void av1_tpl_txfm_stats_update_abs_coeff_mean(TplTxfmStats *txfm_stats) { |
| if (txfm_stats->txfm_block_count > 0) { |
| for (int j = 0; j < txfm_stats->coeff_num; j++) { |
| txfm_stats->abs_coeff_mean[j] = |
| txfm_stats->abs_coeff_sum[j] / txfm_stats->txfm_block_count; |
| } |
| txfm_stats->ready = 1; |
| } else { |
| txfm_stats->ready = 0; |
| } |
| } |
| |
| static AOM_INLINE void av1_tpl_store_txfm_stats( |
| TplParams *tpl_data, const TplTxfmStats *tpl_txfm_stats, |
| const int frame_index) { |
| tpl_data->txfm_stats_list[frame_index] = *tpl_txfm_stats; |
| } |
| |
| static AOM_INLINE void get_quantize_error(const MACROBLOCK *x, int plane, |
| const tran_low_t *coeff, |
| tran_low_t *qcoeff, |
| tran_low_t *dqcoeff, TX_SIZE tx_size, |
| uint16_t *eob, int64_t *recon_error, |
| int64_t *sse) { |
| const struct macroblock_plane *const p = &x->plane[plane]; |
| const MACROBLOCKD *xd = &x->e_mbd; |
| const SCAN_ORDER *const scan_order = &av1_scan_orders[tx_size][DCT_DCT]; |
| int pix_num = 1 << num_pels_log2_lookup[txsize_to_bsize[tx_size]]; |
| const int shift = tx_size == TX_32X32 ? 0 : 2; |
| |
| QUANT_PARAM quant_param; |
| av1_setup_quant(tx_size, 0, AV1_XFORM_QUANT_FP, 0, &quant_param); |
| |
| #if CONFIG_AV1_HIGHBITDEPTH |
| if (is_cur_buf_hbd(xd)) { |
| av1_highbd_quantize_fp_facade(coeff, pix_num, p, qcoeff, dqcoeff, eob, |
| scan_order, &quant_param); |
| *recon_error = |
| av1_highbd_block_error(coeff, dqcoeff, pix_num, sse, xd->bd) >> shift; |
| } else { |
| av1_quantize_fp_facade(coeff, pix_num, p, qcoeff, dqcoeff, eob, scan_order, |
| &quant_param); |
| *recon_error = av1_block_error(coeff, dqcoeff, pix_num, sse) >> shift; |
| } |
| #else |
| (void)xd; |
| av1_quantize_fp_facade(coeff, pix_num, p, qcoeff, dqcoeff, eob, scan_order, |
| &quant_param); |
| *recon_error = av1_block_error(coeff, dqcoeff, pix_num, sse) >> shift; |
| #endif // CONFIG_AV1_HIGHBITDEPTH |
| |
| *recon_error = AOMMAX(*recon_error, 1); |
| |
| *sse = (*sse) >> shift; |
| *sse = AOMMAX(*sse, 1); |
| } |
| |
| static AOM_INLINE void set_tpl_stats_block_size(uint8_t *block_mis_log2, |
| uint8_t *tpl_bsize_1d) { |
| // tpl stats bsize: 2 means 16x16 |
| *block_mis_log2 = 2; |
| // Block size used in tpl motion estimation |
| *tpl_bsize_1d = 16; |
| // MIN_TPL_BSIZE_1D = 16; |
| assert(*tpl_bsize_1d >= 16); |
| } |
| |
| void av1_setup_tpl_buffers(AV1_PRIMARY *const ppi, |
| CommonModeInfoParams *const mi_params, int width, |
| int height, int byte_alignment, int lag_in_frames) { |
| SequenceHeader *const seq_params = &ppi->seq_params; |
| TplParams *const tpl_data = &ppi->tpl_data; |
| set_tpl_stats_block_size(&tpl_data->tpl_stats_block_mis_log2, |
| &tpl_data->tpl_bsize_1d); |
| const uint8_t block_mis_log2 = tpl_data->tpl_stats_block_mis_log2; |
| tpl_data->border_in_pixels = |
| ALIGN_POWER_OF_TWO(tpl_data->tpl_bsize_1d + 2 * AOM_INTERP_EXTEND, 5); |
| |
| const int alloc_y_plane_only = |
| ppi->cpi->sf.tpl_sf.use_y_only_rate_distortion ? 1 : 0; |
| for (int frame = 0; frame < MAX_LENGTH_TPL_FRAME_STATS; ++frame) { |
| const int mi_cols = |
| ALIGN_POWER_OF_TWO(mi_params->mi_cols, MAX_MIB_SIZE_LOG2); |
| const int mi_rows = |
| ALIGN_POWER_OF_TWO(mi_params->mi_rows, MAX_MIB_SIZE_LOG2); |
| TplDepFrame *tpl_frame = &tpl_data->tpl_stats_buffer[frame]; |
| tpl_frame->is_valid = 0; |
| tpl_frame->width = mi_cols >> block_mis_log2; |
| tpl_frame->height = mi_rows >> block_mis_log2; |
| tpl_frame->stride = tpl_data->tpl_stats_buffer[frame].width; |
| tpl_frame->mi_rows = mi_params->mi_rows; |
| tpl_frame->mi_cols = mi_params->mi_cols; |
| } |
| tpl_data->tpl_frame = &tpl_data->tpl_stats_buffer[REF_FRAMES + 1]; |
| |
| // If lag_in_frames <= 1, TPL module is not invoked. Hence dynamic memory |
| // allocations are avoided for buffers in tpl_data. |
| if (lag_in_frames <= 1) return; |
| |
| AOM_CHECK_MEM_ERROR(&ppi->error, tpl_data->txfm_stats_list, |
| aom_calloc(MAX_LENGTH_TPL_FRAME_STATS, |
| sizeof(*tpl_data->txfm_stats_list))); |
| |
| for (int frame = 0; frame < lag_in_frames; ++frame) { |
| AOM_CHECK_MEM_ERROR( |
| &ppi->error, tpl_data->tpl_stats_pool[frame], |
| aom_calloc(tpl_data->tpl_stats_buffer[frame].width * |
| tpl_data->tpl_stats_buffer[frame].height, |
| sizeof(*tpl_data->tpl_stats_buffer[frame].tpl_stats_ptr))); |
| |
| if (aom_alloc_frame_buffer( |
| &tpl_data->tpl_rec_pool[frame], width, height, |
| seq_params->subsampling_x, seq_params->subsampling_y, |
| seq_params->use_highbitdepth, tpl_data->border_in_pixels, |
| byte_alignment, alloc_y_plane_only)) |
| aom_internal_error(&ppi->error, AOM_CODEC_MEM_ERROR, |
| "Failed to allocate frame buffer"); |
| } |
| } |
| |
| static AOM_INLINE int32_t tpl_get_satd_cost(BitDepthInfo bd_info, |
| int16_t *src_diff, int diff_stride, |
| const uint8_t *src, int src_stride, |
| const uint8_t *dst, int dst_stride, |
| tran_low_t *coeff, int bw, int bh, |
| TX_SIZE tx_size) { |
| const int pix_num = bw * bh; |
| |
| av1_subtract_block(bd_info, bh, bw, src_diff, diff_stride, src, src_stride, |
| dst, dst_stride); |
| av1_quick_txfm(/*use_hadamard=*/0, tx_size, bd_info, src_diff, bw, coeff); |
| return aom_satd(coeff, pix_num); |
| } |
| |
| static int rate_estimator(const tran_low_t *qcoeff, int eob, TX_SIZE tx_size) { |
| const SCAN_ORDER *const scan_order = &av1_scan_orders[tx_size][DCT_DCT]; |
| |
| assert((1 << num_pels_log2_lookup[txsize_to_bsize[tx_size]]) >= eob); |
| int rate_cost = 1; |
| |
| for (int idx = 0; idx < eob; ++idx) { |
| int abs_level = abs(qcoeff[scan_order->scan[idx]]); |
| rate_cost += (int)(log(abs_level + 1.0) / log(2.0)) + 1 + (abs_level > 0); |
| } |
| |
| return (rate_cost << AV1_PROB_COST_SHIFT); |
| } |
| |
| static AOM_INLINE void txfm_quant_rdcost( |
| const MACROBLOCK *x, int16_t *src_diff, int diff_stride, uint8_t *src, |
| int src_stride, uint8_t *dst, int dst_stride, tran_low_t *coeff, |
| tran_low_t *qcoeff, tran_low_t *dqcoeff, int bw, int bh, TX_SIZE tx_size, |
| int *rate_cost, int64_t *recon_error, int64_t *sse) { |
| const MACROBLOCKD *xd = &x->e_mbd; |
| const BitDepthInfo bd_info = get_bit_depth_info(xd); |
| uint16_t eob; |
| av1_subtract_block(bd_info, bh, bw, src_diff, diff_stride, src, src_stride, |
| dst, dst_stride); |
| av1_quick_txfm(/*use_hadamard=*/0, tx_size, bd_info, src_diff, bw, coeff); |
| |
| get_quantize_error(x, 0, coeff, qcoeff, dqcoeff, tx_size, &eob, recon_error, |
| sse); |
| |
| *rate_cost = rate_estimator(qcoeff, eob, tx_size); |
| |
| av1_inverse_transform_block(xd, dqcoeff, 0, DCT_DCT, tx_size, dst, dst_stride, |
| eob, 0); |
| } |
| |
| static uint32_t motion_estimation(AV1_COMP *cpi, MACROBLOCK *x, |
| uint8_t *cur_frame_buf, |
| uint8_t *ref_frame_buf, int stride, |
| int stride_ref, BLOCK_SIZE bsize, |
| MV center_mv, int_mv *best_mv) { |
| AV1_COMMON *cm = &cpi->common; |
| MACROBLOCKD *const xd = &x->e_mbd; |
| TPL_SPEED_FEATURES *tpl_sf = &cpi->sf.tpl_sf; |
| int step_param; |
| uint32_t bestsme = UINT_MAX; |
| int distortion; |
| uint32_t sse; |
| int cost_list[5]; |
| FULLPEL_MV start_mv = get_fullmv_from_mv(¢er_mv); |
| |
| // Setup frame pointers |
| x->plane[0].src.buf = cur_frame_buf; |
| x->plane[0].src.stride = stride; |
| xd->plane[0].pre[0].buf = ref_frame_buf; |
| xd->plane[0].pre[0].stride = stride_ref; |
| |
| step_param = tpl_sf->reduce_first_step_size; |
| step_param = AOMMIN(step_param, MAX_MVSEARCH_STEPS - 2); |
| |
| const search_site_config *search_site_cfg = |
| cpi->mv_search_params.search_site_cfg[SS_CFG_SRC]; |
| if (search_site_cfg->stride != stride_ref) |
| search_site_cfg = cpi->mv_search_params.search_site_cfg[SS_CFG_LOOKAHEAD]; |
| assert(search_site_cfg->stride == stride_ref); |
| |
| FULLPEL_MOTION_SEARCH_PARAMS full_ms_params; |
| av1_make_default_fullpel_ms_params(&full_ms_params, cpi, x, bsize, ¢er_mv, |
| search_site_cfg, |
| /*fine_search_interval=*/0); |
| av1_set_mv_search_method(&full_ms_params, search_site_cfg, |
| tpl_sf->search_method); |
| |
| av1_full_pixel_search(start_mv, &full_ms_params, step_param, |
| cond_cost_list(cpi, cost_list), &best_mv->as_fullmv, |
| NULL); |
| |
| SUBPEL_MOTION_SEARCH_PARAMS ms_params; |
| av1_make_default_subpel_ms_params(&ms_params, cpi, x, bsize, ¢er_mv, |
| cost_list); |
| ms_params.forced_stop = tpl_sf->subpel_force_stop; |
| ms_params.var_params.subpel_search_type = USE_2_TAPS; |
| ms_params.mv_cost_params.mv_cost_type = MV_COST_NONE; |
| MV subpel_start_mv = get_mv_from_fullmv(&best_mv->as_fullmv); |
| bestsme = cpi->mv_search_params.find_fractional_mv_step( |
| xd, cm, &ms_params, subpel_start_mv, &best_mv->as_mv, &distortion, &sse, |
| NULL); |
| |
| return bestsme; |
| } |
| |
| typedef struct { |
| int_mv mv; |
| int sad; |
| } center_mv_t; |
| |
| static int compare_sad(const void *a, const void *b) { |
| const int diff = ((center_mv_t *)a)->sad - ((center_mv_t *)b)->sad; |
| if (diff < 0) |
| return -1; |
| else if (diff > 0) |
| return 1; |
| return 0; |
| } |
| |
| static int is_alike_mv(int_mv candidate_mv, center_mv_t *center_mvs, |
| int center_mvs_count, int skip_alike_starting_mv) { |
| // MV difference threshold is in 1/8 precision. |
| const int mv_diff_thr[3] = { 1, (8 << 3), (16 << 3) }; |
| int thr = mv_diff_thr[skip_alike_starting_mv]; |
| int i; |
| |
| for (i = 0; i < center_mvs_count; i++) { |
| if (abs(center_mvs[i].mv.as_mv.col - candidate_mv.as_mv.col) < thr && |
| abs(center_mvs[i].mv.as_mv.row - candidate_mv.as_mv.row) < thr) |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static void get_rate_distortion( |
| int *rate_cost, int64_t *recon_error, int64_t *pred_error, |
| int16_t *src_diff, tran_low_t *coeff, tran_low_t *qcoeff, |
| tran_low_t *dqcoeff, AV1_COMMON *cm, MACROBLOCK *x, |
| const YV12_BUFFER_CONFIG *ref_frame_ptr[2], uint8_t *rec_buffer_pool[3], |
| const int rec_stride_pool[3], TX_SIZE tx_size, PREDICTION_MODE best_mode, |
| int mi_row, int mi_col, int use_y_only_rate_distortion, |
| TplTxfmStats *tpl_txfm_stats) { |
| const SequenceHeader *seq_params = cm->seq_params; |
| *rate_cost = 0; |
| *recon_error = 1; |
| *pred_error = 1; |
| |
| MACROBLOCKD *xd = &x->e_mbd; |
| int is_compound = (best_mode == NEW_NEWMV); |
| int num_planes = use_y_only_rate_distortion ? 1 : MAX_MB_PLANE; |
| |
| uint8_t *src_buffer_pool[MAX_MB_PLANE] = { |
| xd->cur_buf->y_buffer, |
| xd->cur_buf->u_buffer, |
| xd->cur_buf->v_buffer, |
| }; |
| const int src_stride_pool[MAX_MB_PLANE] = { |
| xd->cur_buf->y_stride, |
| xd->cur_buf->uv_stride, |
| xd->cur_buf->uv_stride, |
| }; |
| |
| const int_interpfilters kernel = |
| av1_broadcast_interp_filter(EIGHTTAP_REGULAR); |
| |
| for (int plane = 0; plane < num_planes; ++plane) { |
| struct macroblockd_plane *pd = &xd->plane[plane]; |
| BLOCK_SIZE bsize_plane = |
| av1_ss_size_lookup[txsize_to_bsize[tx_size]][pd->subsampling_x] |
| [pd->subsampling_y]; |
| |
| int dst_buffer_stride = rec_stride_pool[plane]; |
| int dst_mb_offset = |
| ((mi_row * MI_SIZE * dst_buffer_stride) >> pd->subsampling_y) + |
| ((mi_col * MI_SIZE) >> pd->subsampling_x); |
| uint8_t *dst_buffer = rec_buffer_pool[plane] + dst_mb_offset; |
| for (int ref = 0; ref < 1 + is_compound; ++ref) { |
| if (!is_inter_mode(best_mode)) { |
| av1_predict_intra_block( |
| xd, seq_params->sb_size, seq_params->enable_intra_edge_filter, |
| block_size_wide[bsize_plane], block_size_high[bsize_plane], |
| max_txsize_rect_lookup[bsize_plane], best_mode, 0, 0, |
| FILTER_INTRA_MODES, dst_buffer, dst_buffer_stride, dst_buffer, |
| dst_buffer_stride, 0, 0, plane); |
| } else { |
| int_mv best_mv = xd->mi[0]->mv[ref]; |
| uint8_t *ref_buffer_pool[MAX_MB_PLANE] = { |
| ref_frame_ptr[ref]->y_buffer, |
| ref_frame_ptr[ref]->u_buffer, |
| ref_frame_ptr[ref]->v_buffer, |
| }; |
| InterPredParams inter_pred_params; |
| struct buf_2d ref_buf = { |
| NULL, ref_buffer_pool[plane], |
| plane ? ref_frame_ptr[ref]->uv_width : ref_frame_ptr[ref]->y_width, |
| plane ? ref_frame_ptr[ref]->uv_height : ref_frame_ptr[ref]->y_height, |
| plane ? ref_frame_ptr[ref]->uv_stride : ref_frame_ptr[ref]->y_stride |
| }; |
| av1_init_inter_params(&inter_pred_params, block_size_wide[bsize_plane], |
| block_size_high[bsize_plane], |
| (mi_row * MI_SIZE) >> pd->subsampling_y, |
| (mi_col * MI_SIZE) >> pd->subsampling_x, |
| pd->subsampling_x, pd->subsampling_y, xd->bd, |
| is_cur_buf_hbd(xd), 0, |
| xd->block_ref_scale_factors[0], &ref_buf, kernel); |
| if (is_compound) av1_init_comp_mode(&inter_pred_params); |
| inter_pred_params.conv_params = get_conv_params_no_round( |
| ref, plane, xd->tmp_conv_dst, MAX_SB_SIZE, is_compound, xd->bd); |
| |
| av1_enc_build_one_inter_predictor(dst_buffer, dst_buffer_stride, |
| &best_mv.as_mv, &inter_pred_params); |
| } |
| } |
| |
| int src_stride = src_stride_pool[plane]; |
| int src_mb_offset = ((mi_row * MI_SIZE * src_stride) >> pd->subsampling_y) + |
| ((mi_col * MI_SIZE) >> pd->subsampling_x); |
| |
| int this_rate = 1; |
| int64_t this_recon_error = 1; |
| int64_t sse; |
| txfm_quant_rdcost( |
| x, src_diff, block_size_wide[bsize_plane], |
| src_buffer_pool[plane] + src_mb_offset, src_stride, dst_buffer, |
| dst_buffer_stride, coeff, qcoeff, dqcoeff, block_size_wide[bsize_plane], |
| block_size_high[bsize_plane], max_txsize_rect_lookup[bsize_plane], |
| &this_rate, &this_recon_error, &sse); |
| |
| if (plane == 0 && tpl_txfm_stats) { |
| // We only collect Y plane's transform coefficient |
| av1_record_tpl_txfm_block(tpl_txfm_stats, coeff); |
| } |
| |
| *recon_error += this_recon_error; |
| *pred_error += sse; |
| *rate_cost += this_rate; |
| } |
| } |
| |
| static AOM_INLINE void mode_estimation(AV1_COMP *cpi, |
| TplTxfmStats *tpl_txfm_stats, |
| MACROBLOCK *x, int mi_row, int mi_col, |
| BLOCK_SIZE bsize, TX_SIZE tx_size, |
| TplDepStats *tpl_stats) { |
| AV1_COMMON *cm = &cpi->common; |
| const GF_GROUP *gf_group = &cpi->ppi->gf_group; |
| |
| (void)gf_group; |
| |
| MACROBLOCKD *xd = &x->e_mbd; |
| const BitDepthInfo bd_info = get_bit_depth_info(xd); |
| TplParams *tpl_data = &cpi->ppi->tpl_data; |
| TplDepFrame *tpl_frame = &tpl_data->tpl_frame[tpl_data->frame_idx]; |
| const uint8_t block_mis_log2 = tpl_data->tpl_stats_block_mis_log2; |
| |
| const int bw = 4 << mi_size_wide_log2[bsize]; |
| const int bh = 4 << mi_size_high_log2[bsize]; |
| const int_interpfilters kernel = |
| av1_broadcast_interp_filter(EIGHTTAP_REGULAR); |
| |
| int frame_offset = tpl_data->frame_idx - cpi->gf_frame_index; |
| |
| int32_t best_intra_cost = INT32_MAX; |
| int32_t intra_cost; |
| PREDICTION_MODE best_mode = DC_PRED; |
| |
| int mb_y_offset = mi_row * MI_SIZE * xd->cur_buf->y_stride + mi_col * MI_SIZE; |
| uint8_t *src_mb_buffer = xd->cur_buf->y_buffer + mb_y_offset; |
| int src_stride = xd->cur_buf->y_stride; |
| |
| int dst_mb_offset = |
| mi_row * MI_SIZE * tpl_frame->rec_picture->y_stride + mi_col * MI_SIZE; |
| uint8_t *dst_buffer = tpl_frame->rec_picture->y_buffer + dst_mb_offset; |
| int dst_buffer_stride = tpl_frame->rec_picture->y_stride; |
| int use_y_only_rate_distortion = cpi->sf.tpl_sf.use_y_only_rate_distortion; |
| |
| uint8_t *rec_buffer_pool[3] = { |
| tpl_frame->rec_picture->y_buffer, |
| tpl_frame->rec_picture->u_buffer, |
| tpl_frame->rec_picture->v_buffer, |
| }; |
| |
| const int rec_stride_pool[3] = { |
| tpl_frame->rec_picture->y_stride, |
| tpl_frame->rec_picture->uv_stride, |
| tpl_frame->rec_picture->uv_stride, |
| }; |
| |
| for (int plane = 1; plane < MAX_MB_PLANE; ++plane) { |
| struct macroblockd_plane *pd = &xd->plane[plane]; |
| pd->subsampling_x = xd->cur_buf->subsampling_x; |
| pd->subsampling_y = xd->cur_buf->subsampling_y; |
| } |
| |
| // Number of pixels in a tpl block |
| const int tpl_block_pels = tpl_data->tpl_bsize_1d * tpl_data->tpl_bsize_1d; |
| // Allocate temporary buffers used in motion estimation. |
| uint8_t *predictor8 = aom_memalign(32, tpl_block_pels * 2 * sizeof(uint8_t)); |
| int16_t *src_diff = aom_memalign(32, tpl_block_pels * sizeof(int16_t)); |
| tran_low_t *coeff = aom_memalign(32, tpl_block_pels * sizeof(tran_low_t)); |
| tran_low_t *qcoeff = aom_memalign(32, tpl_block_pels * sizeof(tran_low_t)); |
| tran_low_t *dqcoeff = aom_memalign(32, tpl_block_pels * sizeof(tran_low_t)); |
| uint8_t *predictor = |
| is_cur_buf_hbd(xd) ? CONVERT_TO_BYTEPTR(predictor8) : predictor8; |
| int64_t recon_error = 1; |
| int64_t pred_error = 1; |
| |
| if (!(predictor8 && src_diff && coeff && qcoeff && dqcoeff)) { |
| aom_free(predictor8); |
| aom_free(src_diff); |
| aom_free(coeff); |
| aom_free(qcoeff); |
| aom_free(dqcoeff); |
| aom_internal_error(cm->error, AOM_CODEC_MEM_ERROR, |
| "Error allocating tpl data"); |
| } |
| |
| memset(tpl_stats, 0, sizeof(*tpl_stats)); |
| tpl_stats->ref_frame_index[0] = -1; |
| tpl_stats->ref_frame_index[1] = -1; |
| |
| const int mi_width = mi_size_wide[bsize]; |
| const int mi_height = mi_size_high[bsize]; |
| set_mode_info_offsets(&cpi->common.mi_params, &cpi->mbmi_ext_info, x, xd, |
| mi_row, mi_col); |
| set_mi_row_col(xd, &xd->tile, mi_row, mi_height, mi_col, mi_width, |
| cm->mi_params.mi_rows, cm->mi_params.mi_cols); |
| set_plane_n4(xd, mi_size_wide[bsize], mi_size_high[bsize], |
| av1_num_planes(cm)); |
| xd->mi[0]->bsize = bsize; |
| xd->mi[0]->motion_mode = SIMPLE_TRANSLATION; |
| |
| // Intra prediction search |
| xd->mi[0]->ref_frame[0] = INTRA_FRAME; |
| |
| // Pre-load the bottom left line. |
| if (xd->left_available && |
| mi_row + tx_size_high_unit[tx_size] < xd->tile.mi_row_end) { |
| if (is_cur_buf_hbd(xd)) { |
| uint16_t *dst = CONVERT_TO_SHORTPTR(dst_buffer); |
| for (int i = 0; i < bw; ++i) |
| dst[(bw + i) * dst_buffer_stride - 1] = |
| dst[(bw - 1) * dst_buffer_stride - 1]; |
| } else { |
| for (int i = 0; i < bw; ++i) |
| dst_buffer[(bw + i) * dst_buffer_stride - 1] = |
| dst_buffer[(bw - 1) * dst_buffer_stride - 1]; |
| } |
| } |
| |
| // if cpi->sf.tpl_sf.prune_intra_modes is on, then search only DC_PRED, |
| // H_PRED, and V_PRED |
| const PREDICTION_MODE last_intra_mode = |
| cpi->sf.tpl_sf.prune_intra_modes ? D45_PRED : INTRA_MODE_END; |
| const SequenceHeader *seq_params = cm->seq_params; |
| for (PREDICTION_MODE mode = INTRA_MODE_START; mode < last_intra_mode; |
| ++mode) { |
| av1_predict_intra_block(xd, seq_params->sb_size, |
| seq_params->enable_intra_edge_filter, |
| block_size_wide[bsize], block_size_high[bsize], |
| tx_size, mode, 0, 0, FILTER_INTRA_MODES, dst_buffer, |
| dst_buffer_stride, predictor, bw, 0, 0, 0); |
| |
| intra_cost = |
| tpl_get_satd_cost(bd_info, src_diff, bw, src_mb_buffer, src_stride, |
| predictor, bw, coeff, bw, bh, tx_size); |
| |
| if (intra_cost < best_intra_cost) { |
| best_intra_cost = intra_cost; |
| best_mode = mode; |
| } |
| } |
| |
| int rate_cost = 1; |
| |
| if (cpi->use_ducky_encode) { |
| get_rate_distortion(&rate_cost, &recon_error, &pred_error, src_diff, coeff, |
| qcoeff, dqcoeff, cm, x, NULL, rec_buffer_pool, |
| rec_stride_pool, tx_size, best_mode, mi_row, mi_col, |
| use_y_only_rate_distortion, NULL); |
| |
| tpl_stats->intra_dist = recon_error << TPL_DEP_COST_SCALE_LOG2; |
| tpl_stats->intra_sse = pred_error << TPL_DEP_COST_SCALE_LOG2; |
| tpl_stats->intra_rate = rate_cost; |
| } |
| |
| if (cpi->third_pass_ctx && |
| frame_offset < cpi->third_pass_ctx->frame_info_count && |
| tpl_data->frame_idx < gf_group->size) { |
| double ratio_h, ratio_w; |
| av1_get_third_pass_ratio(cpi->third_pass_ctx, frame_offset, cm->height, |
| cm->width, &ratio_h, &ratio_w); |
| THIRD_PASS_MI_INFO *this_mi = av1_get_third_pass_mi( |
| cpi->third_pass_ctx, frame_offset, mi_row, mi_col, ratio_h, ratio_w); |
| |
| PREDICTION_MODE third_pass_mode = this_mi->pred_mode; |
| |
| if (third_pass_mode >= last_intra_mode && |
| third_pass_mode < INTRA_MODE_END) { |
| av1_predict_intra_block( |
| xd, seq_params->sb_size, seq_params->enable_intra_edge_filter, |
| block_size_wide[bsize], block_size_high[bsize], tx_size, |
| third_pass_mode, 0, 0, FILTER_INTRA_MODES, dst_buffer, |
| dst_buffer_stride, predictor, bw, 0, 0, 0); |
| |
| intra_cost = |
| tpl_get_satd_cost(bd_info, src_diff, bw, src_mb_buffer, src_stride, |
| predictor, bw, coeff, bw, bh, tx_size); |
| |
| if (intra_cost < best_intra_cost) { |
| best_intra_cost = intra_cost; |
| best_mode = third_pass_mode; |
| } |
| } |
| } |
| |
| // Motion compensated prediction |
| xd->mi[0]->ref_frame[0] = INTRA_FRAME; |
| xd->mi[0]->ref_frame[1] = NONE_FRAME; |
| xd->mi[0]->compound_idx = 1; |
| |
| int best_rf_idx = -1; |
| int_mv best_mv[2]; |
| int32_t inter_cost; |
| int32_t best_inter_cost = INT32_MAX; |
| int rf_idx; |
| int_mv single_mv[INTER_REFS_PER_FRAME]; |
| |
| best_mv[0].as_int = INVALID_MV; |
| best_mv[1].as_int = INVALID_MV; |
| |
| for (rf_idx = 0; rf_idx < INTER_REFS_PER_FRAME; ++rf_idx) { |
| single_mv[rf_idx].as_int = INVALID_MV; |
| if (tpl_data->ref_frame[rf_idx] == NULL || |
| tpl_data->src_ref_frame[rf_idx] == NULL) { |
| tpl_stats->mv[rf_idx].as_int = INVALID_MV; |
| continue; |
| } |
| |
| const YV12_BUFFER_CONFIG *ref_frame_ptr = tpl_data->src_ref_frame[rf_idx]; |
| int ref_mb_offset = |
| mi_row * MI_SIZE * ref_frame_ptr->y_stride + mi_col * MI_SIZE; |
| uint8_t *ref_mb = ref_frame_ptr->y_buffer + ref_mb_offset; |
| int ref_stride = ref_frame_ptr->y_stride; |
| |
| int_mv best_rfidx_mv = { 0 }; |
| uint32_t bestsme = UINT32_MAX; |
| |
| center_mv_t center_mvs[4] = { { { 0 }, INT_MAX }, |
| { { 0 }, INT_MAX }, |
| { { 0 }, INT_MAX }, |
| { { 0 }, INT_MAX } }; |
| int refmv_count = 1; |
| int idx; |
| |
| if (xd->up_available) { |
| TplDepStats *ref_tpl_stats = &tpl_frame->tpl_stats_ptr[av1_tpl_ptr_pos( |
| mi_row - mi_height, mi_col, tpl_frame->stride, block_mis_log2)]; |
| if (!is_alike_mv(ref_tpl_stats->mv[rf_idx], center_mvs, refmv_count, |
| cpi->sf.tpl_sf.skip_alike_starting_mv)) { |
| center_mvs[refmv_count].mv.as_int = ref_tpl_stats->mv[rf_idx].as_int; |
| ++refmv_count; |
| } |
| } |
| |
| if (xd->left_available) { |
| TplDepStats *ref_tpl_stats = &tpl_frame->tpl_stats_ptr[av1_tpl_ptr_pos( |
| mi_row, mi_col - mi_width, tpl_frame->stride, block_mis_log2)]; |
| if (!is_alike_mv(ref_tpl_stats->mv[rf_idx], center_mvs, refmv_count, |
| cpi->sf.tpl_sf.skip_alike_starting_mv)) { |
| center_mvs[refmv_count].mv.as_int = ref_tpl_stats->mv[rf_idx].as_int; |
| ++refmv_count; |
| } |
| } |
| |
| if (xd->up_available && mi_col + mi_width < xd->tile.mi_col_end) { |
| TplDepStats *ref_tpl_stats = &tpl_frame->tpl_stats_ptr[av1_tpl_ptr_pos( |
| mi_row - mi_height, mi_col + mi_width, tpl_frame->stride, |
| block_mis_log2)]; |
| if (!is_alike_mv(ref_tpl_stats->mv[rf_idx], center_mvs, refmv_count, |
| cpi->sf.tpl_sf.skip_alike_starting_mv)) { |
| center_mvs[refmv_count].mv.as_int = ref_tpl_stats->mv[rf_idx].as_int; |
| ++refmv_count; |
| } |
| } |
| |
| if (cpi->third_pass_ctx && |
| frame_offset < cpi->third_pass_ctx->frame_info_count && |
| tpl_data->frame_idx < gf_group->size) { |
| double ratio_h, ratio_w; |
| av1_get_third_pass_ratio(cpi->third_pass_ctx, frame_offset, cm->height, |
| cm->width, &ratio_h, &ratio_w); |
| THIRD_PASS_MI_INFO *this_mi = av1_get_third_pass_mi( |
| cpi->third_pass_ctx, frame_offset, mi_row, mi_col, ratio_h, ratio_w); |
| |
| int_mv tp_mv = av1_get_third_pass_adjusted_mv(this_mi, ratio_h, ratio_w, |
| rf_idx + LAST_FRAME); |
| if (tp_mv.as_int != INVALID_MV && |
| !is_alike_mv(tp_mv, center_mvs + 1, refmv_count - 1, |
| cpi->sf.tpl_sf.skip_alike_starting_mv)) { |
| center_mvs[0].mv = tp_mv; |
| } |
| } |
| |
| // Prune starting mvs |
| if (cpi->sf.tpl_sf.prune_starting_mv) { |
| // Get each center mv's sad. |
| for (idx = 0; idx < refmv_count; ++idx) { |
| FULLPEL_MV mv = get_fullmv_from_mv(¢er_mvs[idx].mv.as_mv); |
| clamp_fullmv(&mv, &x->mv_limits); |
| center_mvs[idx].sad = (int)cpi->ppi->fn_ptr[bsize].sdf( |
| src_mb_buffer, src_stride, &ref_mb[mv.row * ref_stride + mv.col], |
| ref_stride); |
| } |
| |
| // Rank center_mv using sad. |
| if (refmv_count > 1) { |
| qsort(center_mvs, refmv_count, sizeof(center_mvs[0]), compare_sad); |
| } |
| refmv_count = AOMMIN(4 - cpi->sf.tpl_sf.prune_starting_mv, refmv_count); |
| // Further reduce number of refmv based on sad difference. |
| if (refmv_count > 1) { |
| int last_sad = center_mvs[refmv_count - 1].sad; |
| int second_to_last_sad = center_mvs[refmv_count - 2].sad; |
| if ((last_sad - second_to_last_sad) * 5 > second_to_last_sad) |
| refmv_count--; |
| } |
| } |
| |
| for (idx = 0; idx < refmv_count; ++idx) { |
| int_mv this_mv; |
| uint32_t thissme = motion_estimation(cpi, x, src_mb_buffer, ref_mb, |
| src_stride, ref_stride, bsize, |
| center_mvs[idx].mv.as_mv, &this_mv); |
| |
| if (thissme < bestsme) { |
| bestsme = thissme; |
| best_rfidx_mv = this_mv; |
| } |
| } |
| |
| tpl_stats->mv[rf_idx].as_int = best_rfidx_mv.as_int; |
| single_mv[rf_idx] = best_rfidx_mv; |
| |
| struct buf_2d ref_buf = { NULL, ref_frame_ptr->y_buffer, |
| ref_frame_ptr->y_width, ref_frame_ptr->y_height, |
| ref_frame_ptr->y_stride }; |
| InterPredParams inter_pred_params; |
| av1_init_inter_params(&inter_pred_params, bw, bh, mi_row * MI_SIZE, |
| mi_col * MI_SIZE, 0, 0, xd->bd, is_cur_buf_hbd(xd), 0, |
| &tpl_data->sf, &ref_buf, kernel); |
| inter_pred_params.conv_params = get_conv_params(0, 0, xd->bd); |
| |
| av1_enc_build_one_inter_predictor(predictor, bw, &best_rfidx_mv.as_mv, |
| &inter_pred_params); |
| |
| inter_cost = |
| tpl_get_satd_cost(bd_info, src_diff, bw, src_mb_buffer, src_stride, |
| predictor, bw, coeff, bw, bh, tx_size); |
| // Store inter cost for each ref frame |
| tpl_stats->pred_error[rf_idx] = AOMMAX(1, inter_cost); |
| |
| if (inter_cost < best_inter_cost) { |
| best_rf_idx = rf_idx; |
| |
| best_inter_cost = inter_cost; |
| best_mv[0].as_int = best_rfidx_mv.as_int; |
| } |
| } |
| |
| if (best_rf_idx != -1 && best_inter_cost < best_intra_cost) { |
| best_mode = NEWMV; |
| xd->mi[0]->ref_frame[0] = best_rf_idx + LAST_FRAME; |
| xd->mi[0]->mv[0].as_int = best_mv[0].as_int; |
| } |
| |
| // Start compound predition search. |
| int comp_ref_frames[3][2] = { |
| { 0, 4 }, |
| { 0, 6 }, |
| { 3, 6 }, |
| }; |
| |
| int start_rf = 0; |
| int end_rf = 3; |
| if (!cpi->sf.tpl_sf.allow_compound_pred) end_rf = 0; |
| if (cpi->third_pass_ctx && |
| frame_offset < cpi->third_pass_ctx->frame_info_count && |
| tpl_data->frame_idx < gf_group->size) { |
| double ratio_h, ratio_w; |
| av1_get_third_pass_ratio(cpi->third_pass_ctx, frame_offset, cm->height, |
| cm->width, &ratio_h, &ratio_w); |
| THIRD_PASS_MI_INFO *this_mi = av1_get_third_pass_mi( |
| cpi->third_pass_ctx, frame_offset, mi_row, mi_col, ratio_h, ratio_w); |
| |
| if (this_mi->ref_frame[0] >= LAST_FRAME && |
| this_mi->ref_frame[1] >= LAST_FRAME) { |
| int found = 0; |
| for (int i = 0; i < 3; i++) { |
| if (comp_ref_frames[i][0] + LAST_FRAME == this_mi->ref_frame[0] && |
| comp_ref_frames[i][1] + LAST_FRAME == this_mi->ref_frame[1]) { |
| found = 1; |
| break; |
| } |
| } |
| if (!found || !cpi->sf.tpl_sf.allow_compound_pred) { |
| comp_ref_frames[2][0] = this_mi->ref_frame[0] - LAST_FRAME; |
| comp_ref_frames[2][1] = this_mi->ref_frame[1] - LAST_FRAME; |
| if (!cpi->sf.tpl_sf.allow_compound_pred) { |
| start_rf = 2; |
| end_rf = 3; |
| } |
| } |
| } |
| } |
| |
| xd->mi_row = mi_row; |
| xd->mi_col = mi_col; |
| int best_cmp_rf_idx = -1; |
| for (int cmp_rf_idx = start_rf; cmp_rf_idx < end_rf; ++cmp_rf_idx) { |
| int rf_idx0 = comp_ref_frames[cmp_rf_idx][0]; |
| int rf_idx1 = comp_ref_frames[cmp_rf_idx][1]; |
| |
| if (tpl_data->ref_frame[rf_idx0] == NULL || |
| tpl_data->src_ref_frame[rf_idx0] == NULL || |
| tpl_data->ref_frame[rf_idx1] == NULL || |
| tpl_data->src_ref_frame[rf_idx1] == NULL) { |
| continue; |
| } |
| |
| const YV12_BUFFER_CONFIG *ref_frame_ptr[2] = { |
| tpl_data->src_ref_frame[rf_idx0], |
| tpl_data->src_ref_frame[rf_idx1], |
| }; |
| |
| xd->mi[0]->ref_frame[0] = rf_idx0 + LAST_FRAME; |
| xd->mi[0]->ref_frame[1] = rf_idx1 + LAST_FRAME; |
| xd->mi[0]->mode = NEW_NEWMV; |
| const int8_t ref_frame_type = av1_ref_frame_type(xd->mi[0]->ref_frame); |
| // Set up ref_mv for av1_joint_motion_search(). |
| CANDIDATE_MV *this_ref_mv_stack = x->mbmi_ext.ref_mv_stack[ref_frame_type]; |
| this_ref_mv_stack[xd->mi[0]->ref_mv_idx].this_mv = single_mv[rf_idx0]; |
| this_ref_mv_stack[xd->mi[0]->ref_mv_idx].comp_mv = single_mv[rf_idx1]; |
| |
| struct buf_2d yv12_mb[2][MAX_MB_PLANE]; |
| for (int i = 0; i < 2; ++i) { |
| av1_setup_pred_block(xd, yv12_mb[i], ref_frame_ptr[i], |
| xd->block_ref_scale_factors[i], |
| xd->block_ref_scale_factors[i], MAX_MB_PLANE); |
| for (int plane = 0; plane < MAX_MB_PLANE; ++plane) { |
| xd->plane[plane].pre[i] = yv12_mb[i][plane]; |
| } |
| } |
| |
| int_mv tmp_mv[2] = { single_mv[rf_idx0], single_mv[rf_idx1] }; |
| int rate_mv; |
| av1_joint_motion_search(cpi, x, bsize, tmp_mv, NULL, 0, &rate_mv, |
| !cpi->sf.mv_sf.disable_second_mv); |
| |
| for (int ref = 0; ref < 2; ++ref) { |
| struct buf_2d ref_buf = { NULL, ref_frame_ptr[ref]->y_buffer, |
| ref_frame_ptr[ref]->y_width, |
| ref_frame_ptr[ref]->y_height, |
| ref_frame_ptr[ref]->y_stride }; |
| InterPredParams inter_pred_params; |
| av1_init_inter_params(&inter_pred_params, bw, bh, mi_row * MI_SIZE, |
| mi_col * MI_SIZE, 0, 0, xd->bd, is_cur_buf_hbd(xd), |
| 0, &tpl_data->sf, &ref_buf, kernel); |
| av1_init_comp_mode(&inter_pred_params); |
| |
| inter_pred_params.conv_params = get_conv_params_no_round( |
| ref, 0, xd->tmp_conv_dst, MAX_SB_SIZE, 1, xd->bd); |
| |
| av1_enc_build_one_inter_predictor(predictor, bw, &tmp_mv[ref].as_mv, |
| &inter_pred_params); |
| } |
| inter_cost = |
| tpl_get_satd_cost(bd_info, src_diff, bw, src_mb_buffer, src_stride, |
| predictor, bw, coeff, bw, bh, tx_size); |
| if (inter_cost < best_inter_cost) { |
| best_cmp_rf_idx = cmp_rf_idx; |
| best_inter_cost = inter_cost; |
| best_mv[0] = tmp_mv[0]; |
| best_mv[1] = tmp_mv[1]; |
| } |
| } |
| |
| if (best_cmp_rf_idx != -1 && best_inter_cost < best_intra_cost) { |
| best_mode = NEW_NEWMV; |
| const int best_rf_idx0 = comp_ref_frames[best_cmp_rf_idx][0]; |
| const int best_rf_idx1 = comp_ref_frames[best_cmp_rf_idx][1]; |
| xd->mi[0]->ref_frame[0] = best_rf_idx0 + LAST_FRAME; |
| xd->mi[0]->ref_frame[1] = best_rf_idx1 + LAST_FRAME; |
| } |
| |
| if (best_inter_cost < INT32_MAX) { |
| xd->mi[0]->mv[0].as_int = best_mv[0].as_int; |
| xd->mi[0]->mv[1].as_int = best_mv[1].as_int; |
| const YV12_BUFFER_CONFIG *ref_frame_ptr[2] = { |
| best_cmp_rf_idx >= 0 |
| ? tpl_data->src_ref_frame[comp_ref_frames[best_cmp_rf_idx][0]] |
| : tpl_data->src_ref_frame[best_rf_idx], |
| best_cmp_rf_idx >= 0 |
| ? tpl_data->src_ref_frame[comp_ref_frames[best_cmp_rf_idx][1]] |
| : NULL, |
| }; |
| rate_cost = 1; |
| get_rate_distortion(&rate_cost, &recon_error, &pred_error, src_diff, coeff, |
| qcoeff, dqcoeff, cm, x, ref_frame_ptr, rec_buffer_pool, |
| rec_stride_pool, tx_size, best_mode, mi_row, mi_col, |
| use_y_only_rate_distortion, NULL); |
| tpl_stats->srcrf_rate = rate_cost; |
| } |
| |
| best_intra_cost = AOMMAX(best_intra_cost, 1); |
| best_inter_cost = AOMMIN(best_intra_cost, best_inter_cost); |
| tpl_stats->inter_cost = best_inter_cost; |
| tpl_stats->intra_cost = best_intra_cost; |
| |
| tpl_stats->srcrf_dist = recon_error << TPL_DEP_COST_SCALE_LOG2; |
| tpl_stats->srcrf_sse = pred_error << TPL_DEP_COST_SCALE_LOG2; |
| |
| // Final encode |
| rate_cost = 0; |
| const YV12_BUFFER_CONFIG *ref_frame_ptr[2]; |
| |
| ref_frame_ptr[0] = |
| best_mode == NEW_NEWMV |
| ? tpl_data->ref_frame[comp_ref_frames[best_cmp_rf_idx][0]] |
| : best_rf_idx >= 0 ? tpl_data->ref_frame[best_rf_idx] |
| : NULL; |
| ref_frame_ptr[1] = |
| best_mode == NEW_NEWMV |
| ? tpl_data->ref_frame[comp_ref_frames[best_cmp_rf_idx][1]] |
| : NULL; |
| get_rate_distortion(&rate_cost, &recon_error, &pred_error, src_diff, coeff, |
| qcoeff, dqcoeff, cm, x, ref_frame_ptr, rec_buffer_pool, |
| rec_stride_pool, tx_size, best_mode, mi_row, mi_col, |
| use_y_only_rate_distortion, tpl_txfm_stats); |
| |
| tpl_stats->recrf_dist = recon_error << TPL_DEP_COST_SCALE_LOG2; |
| tpl_stats->recrf_sse = pred_error << TPL_DEP_COST_SCALE_LOG2; |
| tpl_stats->recrf_rate = rate_cost; |
| |
| if (!is_inter_mode(best_mode)) { |
| tpl_stats->srcrf_dist = recon_error << TPL_DEP_COST_SCALE_LOG2; |
| tpl_stats->srcrf_rate = rate_cost; |
| tpl_stats->srcrf_sse = pred_error << TPL_DEP_COST_SCALE_LOG2; |
| } |
| |
| tpl_stats->recrf_dist = AOMMAX(tpl_stats->srcrf_dist, tpl_stats->recrf_dist); |
| tpl_stats->recrf_rate = AOMMAX(tpl_stats->srcrf_rate, tpl_stats->recrf_rate); |
| |
| if (best_mode == NEW_NEWMV) { |
| ref_frame_ptr[0] = tpl_data->ref_frame[comp_ref_frames[best_cmp_rf_idx][0]]; |
| ref_frame_ptr[1] = |
| tpl_data->src_ref_frame[comp_ref_frames[best_cmp_rf_idx][1]]; |
| get_rate_distortion(&rate_cost, &recon_error, &pred_error, src_diff, coeff, |
| qcoeff, dqcoeff, cm, x, ref_frame_ptr, rec_buffer_pool, |
| rec_stride_pool, tx_size, best_mode, mi_row, mi_col, |
| use_y_only_rate_distortion, NULL); |
| tpl_stats->cmp_recrf_dist[0] = recon_error << TPL_DEP_COST_SCALE_LOG2; |
| tpl_stats->cmp_recrf_rate[0] = rate_cost; |
| |
| tpl_stats->cmp_recrf_dist[0] = |
| AOMMAX(tpl_stats->srcrf_dist, tpl_stats->cmp_recrf_dist[0]); |
| tpl_stats->cmp_recrf_rate[0] = |
| AOMMAX(tpl_stats->srcrf_rate, tpl_stats->cmp_recrf_rate[0]); |
| |
| tpl_stats->cmp_recrf_dist[0] = |
| AOMMIN(tpl_stats->recrf_dist, tpl_stats->cmp_recrf_dist[0]); |
| tpl_stats->cmp_recrf_rate[0] = |
| AOMMIN(tpl_stats->recrf_rate, tpl_stats->cmp_recrf_rate[0]); |
| |
| rate_cost = 0; |
| ref_frame_ptr[0] = |
| tpl_data->src_ref_frame[comp_ref_frames[best_cmp_rf_idx][0]]; |
| ref_frame_ptr[1] = tpl_data->ref_frame[comp_ref_frames[best_cmp_rf_idx][1]]; |
| get_rate_distortion(&rate_cost, &recon_error, &pred_error, src_diff, coeff, |
| qcoeff, dqcoeff, cm, x, ref_frame_ptr, rec_buffer_pool, |
| rec_stride_pool, tx_size, best_mode, mi_row, mi_col, |
| use_y_only_rate_distortion, NULL); |
| tpl_stats->cmp_recrf_dist[1] = recon_error << TPL_DEP_COST_SCALE_LOG2; |
| tpl_stats->cmp_recrf_rate[1] = rate_cost; |
| |
| tpl_stats->cmp_recrf_dist[1] = |
| AOMMAX(tpl_stats->srcrf_dist, tpl_stats->cmp_recrf_dist[1]); |
| tpl_stats->cmp_recrf_rate[1] = |
| AOMMAX(tpl_stats->srcrf_rate, tpl_stats->cmp_recrf_rate[1]); |
| |
| tpl_stats->cmp_recrf_dist[1] = |
| AOMMIN(tpl_stats->recrf_dist, tpl_stats->cmp_recrf_dist[1]); |
| tpl_stats->cmp_recrf_rate[1] = |
| AOMMIN(tpl_stats->recrf_rate, tpl_stats->cmp_recrf_rate[1]); |
| } |
| |
| if (best_mode == NEWMV) { |
| tpl_stats->mv[best_rf_idx] = best_mv[0]; |
| tpl_stats->ref_frame_index[0] = best_rf_idx; |
| tpl_stats->ref_frame_index[1] = NONE_FRAME; |
| } else if (best_mode == NEW_NEWMV) { |
| tpl_stats->ref_frame_index[0] = comp_ref_frames[best_cmp_rf_idx][0]; |
| tpl_stats->ref_frame_index[1] = comp_ref_frames[best_cmp_rf_idx][1]; |
| tpl_stats->mv[tpl_stats->ref_frame_index[0]] = best_mv[0]; |
| tpl_stats->mv[tpl_stats->ref_frame_index[1]] = best_mv[1]; |
| } |
| |
| for (int idy = 0; idy < mi_height; ++idy) { |
| for (int idx = 0; idx < mi_width; ++idx) { |
| if ((xd->mb_to_right_edge >> (3 + MI_SIZE_LOG2)) + mi_width > idx && |
| (xd->mb_to_bottom_edge >> (3 + MI_SIZE_LOG2)) + mi_height > idy) { |
| xd->mi[idx + idy * cm->mi_params.mi_stride] = xd->mi[0]; |
| } |
| } |
| } |
| |
| // Free temporary buffers. |
| aom_free(predictor8); |
| aom_free(src_diff); |
| aom_free(coeff); |
| aom_free(qcoeff); |
| aom_free(dqcoeff); |
| } |
| |
| static int round_floor(int ref_pos, int bsize_pix) { |
| int round; |
| if (ref_pos < 0) |
| round = -(1 + (-ref_pos - 1) / bsize_pix); |
| else |
| round = ref_pos / bsize_pix; |
| |
| return round; |
| } |
| |
| int av1_get_overlap_area(int row_a, int col_a, int row_b, int col_b, int width, |
| int height) { |
| int min_row = AOMMAX(row_a, row_b); |
| int max_row = AOMMIN(row_a + height, row_b + height); |
| int min_col = AOMMAX(col_a, col_b); |
| int max_col = AOMMIN(col_a + width, col_b + width); |
| if (min_row < max_row && min_col < max_col) { |
| return (max_row - min_row) * (max_col - min_col); |
| } |
| return 0; |
| } |
| |
| int av1_tpl_ptr_pos(int mi_row, int mi_col, int stride, uint8_t right_shift) { |
| return (mi_row >> right_shift) * stride + (mi_col >> right_shift); |
| } |
| |
| int64_t av1_delta_rate_cost(int64_t delta_rate, int64_t recrf_dist, |
| int64_t srcrf_dist, int pix_num) { |
| double beta = (double)srcrf_dist / recrf_dist; |
| int64_t rate_cost = delta_rate; |
| |
| if (srcrf_dist <= 128) return rate_cost; |
| |
| double dr = |
| (double)(delta_rate >> (TPL_DEP_COST_SCALE_LOG2 + AV1_PROB_COST_SHIFT)) / |
| pix_num; |
| |
| double log_den = log(beta) / log(2.0) + 2.0 * dr; |
| |
| if (log_den > log(10.0) / log(2.0)) { |
| rate_cost = (int64_t)((log(1.0 / beta) * pix_num) / log(2.0) / 2.0); |
| rate_cost <<= (TPL_DEP_COST_SCALE_LOG2 + AV1_PROB_COST_SHIFT); |
| return rate_cost; |
| } |
| |
| double num = pow(2.0, log_den); |
| double den = num * beta + (1 - beta) * beta; |
| |
| rate_cost = (int64_t)((pix_num * log(num / den)) / log(2.0) / 2.0); |
| |
| rate_cost <<= (TPL_DEP_COST_SCALE_LOG2 + AV1_PROB_COST_SHIFT); |
| |
| return rate_cost; |
| } |
| |
| static AOM_INLINE void tpl_model_update_b(TplParams *const tpl_data, int mi_row, |
| int mi_col, const BLOCK_SIZE bsize, |
| int frame_idx, int ref) { |
| TplDepFrame *tpl_frame_ptr = &tpl_data->tpl_frame[frame_idx]; |
| TplDepStats *tpl_ptr = tpl_frame_ptr->tpl_stats_ptr; |
| TplDepFrame *tpl_frame = tpl_data->tpl_frame; |
| const uint8_t block_mis_log2 = tpl_data->tpl_stats_block_mis_log2; |
| TplDepStats *tpl_stats_ptr = &tpl_ptr[av1_tpl_ptr_pos( |
| mi_row, mi_col, tpl_frame->stride, block_mis_log2)]; |
| |
| int is_compound = tpl_stats_ptr->ref_frame_index[1] >= 0; |
| |
| if (tpl_stats_ptr->ref_frame_index[ref] < 0) return; |
| const int ref_frame_index = tpl_stats_ptr->ref_frame_index[ref]; |
| TplDepFrame *ref_tpl_frame = |
| &tpl_frame[tpl_frame[frame_idx].ref_map_index[ref_frame_index]]; |
| TplDepStats *ref_stats_ptr = ref_tpl_frame->tpl_stats_ptr; |
| |
| if (tpl_frame[frame_idx].ref_map_index[ref_frame_index] < 0) return; |
| |
| const FULLPEL_MV full_mv = |
| get_fullmv_from_mv(&tpl_stats_ptr->mv[ref_frame_index].as_mv); |
| const int ref_pos_row = mi_row * MI_SIZE + full_mv.row; |
| const int ref_pos_col = mi_col * MI_SIZE + full_mv.col; |
| |
| const int bw = 4 << mi_size_wide_log2[bsize]; |
| const int bh = 4 << mi_size_high_log2[bsize]; |
| const int mi_height = mi_size_high[bsize]; |
| const int mi_width = mi_size_wide[bsize]; |
| const int pix_num = bw * bh; |
| |
| // top-left on grid block location in pixel |
| int grid_pos_row_base = round_floor(ref_pos_row, bh) * bh; |
| int grid_pos_col_base = round_floor(ref_pos_col, bw) * bw; |
| int block; |
| |
| int64_t srcrf_dist = is_compound ? tpl_stats_ptr->cmp_recrf_dist[!ref] |
| : tpl_stats_ptr->srcrf_dist; |
| int64_t srcrf_rate = |
| is_compound |
| ? (tpl_stats_ptr->cmp_recrf_rate[!ref] << TPL_DEP_COST_SCALE_LOG2) |
| : (tpl_stats_ptr->srcrf_rate << TPL_DEP_COST_SCALE_LOG2); |
| |
| int64_t cur_dep_dist = tpl_stats_ptr->recrf_dist - srcrf_dist; |
| int64_t mc_dep_dist = |
| (int64_t)(tpl_stats_ptr->mc_dep_dist * |
| ((double)(tpl_stats_ptr->recrf_dist - srcrf_dist) / |
| tpl_stats_ptr->recrf_dist)); |
| int64_t delta_rate = |
| (tpl_stats_ptr->recrf_rate << TPL_DEP_COST_SCALE_LOG2) - srcrf_rate; |
| int64_t mc_dep_rate = |
| av1_delta_rate_cost(tpl_stats_ptr->mc_dep_rate, tpl_stats_ptr->recrf_dist, |
| srcrf_dist, pix_num); |
| |
| for (block = 0; block < 4; ++block) { |
| int grid_pos_row = grid_pos_row_base + bh * (block >> 1); |
| int grid_pos_col = grid_pos_col_base + bw * (block & 0x01); |
| |
| if (grid_pos_row >= 0 && grid_pos_row < ref_tpl_frame->mi_rows * MI_SIZE && |
| grid_pos_col >= 0 && grid_pos_col < ref_tpl_frame->mi_cols * MI_SIZE) { |
| int overlap_area = av1_get_overlap_area(grid_pos_row, grid_pos_col, |
| ref_pos_row, ref_pos_col, bw, bh); |
| int ref_mi_row = round_floor(grid_pos_row, bh) * mi_height; |
| int ref_mi_col = round_floor(grid_pos_col, bw) * mi_width; |
| assert((1 << block_mis_log2) == mi_height); |
| assert((1 << block_mis_log2) == mi_width); |
| TplDepStats *des_stats = &ref_stats_ptr[av1_tpl_ptr_pos( |
| ref_mi_row, ref_mi_col, ref_tpl_frame->stride, block_mis_log2)]; |
| des_stats->mc_dep_dist += |
| ((cur_dep_dist + mc_dep_dist) * overlap_area) / pix_num; |
| des_stats->mc_dep_rate += |
| ((delta_rate + mc_dep_rate) * overlap_area) / pix_num; |
| } |
| } |
| } |
| |
| static AOM_INLINE void tpl_model_update(TplParams *const tpl_data, int mi_row, |
| int mi_col, int frame_idx) { |
| const BLOCK_SIZE tpl_stats_block_size = |
| convert_length_to_bsize(MI_SIZE << tpl_data->tpl_stats_block_mis_log2); |
| tpl_model_update_b(tpl_data, mi_row, mi_col, tpl_stats_block_size, frame_idx, |
| 0); |
| tpl_model_update_b(tpl_data, mi_row, mi_col, tpl_stats_block_size, frame_idx, |
| 1); |
| } |
| |
| static AOM_INLINE void tpl_model_store(TplDepStats *tpl_stats_ptr, int mi_row, |
| int mi_col, int stride, |
| const TplDepStats *src_stats, |
| uint8_t block_mis_log2) { |
| int index = av1_tpl_ptr_pos(mi_row, mi_col, stride, block_mis_log2); |
| TplDepStats *tpl_ptr = &tpl_stats_ptr[index]; |
| *tpl_ptr = *src_stats; |
| tpl_ptr->intra_cost = AOMMAX(1, tpl_ptr->intra_cost); |
| tpl_ptr->inter_cost = AOMMAX(1, tpl_ptr->inter_cost); |
| tpl_ptr->srcrf_dist = AOMMAX(1, tpl_ptr->srcrf_dist); |
| tpl_ptr->srcrf_sse = AOMMAX(1, tpl_ptr->srcrf_sse); |
| tpl_ptr->recrf_dist = AOMMAX(1, tpl_ptr->recrf_dist); |
| tpl_ptr->srcrf_rate = AOMMAX(1, tpl_ptr->srcrf_rate); |
| tpl_ptr->recrf_rate = AOMMAX(1, tpl_ptr->recrf_rate); |
| tpl_ptr->cmp_recrf_dist[0] = AOMMAX(1, tpl_ptr->cmp_recrf_dist[0]); |
| tpl_ptr->cmp_recrf_dist[1] = AOMMAX(1, tpl_ptr->cmp_recrf_dist[1]); |
| tpl_ptr->cmp_recrf_rate[0] = AOMMAX(1, tpl_ptr->cmp_recrf_rate[0]); |
| tpl_ptr->cmp_recrf_rate[1] = AOMMAX(1, tpl_ptr->cmp_recrf_rate[1]); |
| } |
| |
| // Reset the ref and source frame pointers of tpl_data. |
| static AOM_INLINE void tpl_reset_src_ref_frames(TplParams *tpl_data) { |
| for (int i = 0; i < INTER_REFS_PER_FRAME; ++i) { |
| tpl_data->ref_frame[i] = NULL; |
| tpl_data->src_ref_frame[i] = NULL; |
| } |
| } |
| |
| static AOM_INLINE int get_gop_length(const GF_GROUP *gf_group) { |
| int gop_length = AOMMIN(gf_group->size, MAX_TPL_FRAME_IDX - 1); |
| return gop_length; |
| } |
| |
| // Initialize the mc_flow parameters used in computing tpl data. |
| static AOM_INLINE void init_mc_flow_dispenser(AV1_COMP *cpi, int frame_idx, |
| int pframe_qindex) { |
| TplParams *const tpl_data = &cpi->ppi->tpl_data; |
| TplDepFrame *tpl_frame = &tpl_data->tpl_frame[frame_idx]; |
| const YV12_BUFFER_CONFIG *this_frame = tpl_frame->gf_picture; |
| const YV12_BUFFER_CONFIG *ref_frames_ordered[INTER_REFS_PER_FRAME]; |
| uint32_t ref_frame_display_indices[INTER_REFS_PER_FRAME]; |
| const GF_GROUP *gf_group = &cpi->ppi->gf_group; |
| int ref_pruning_enabled = is_frame_eligible_for_ref_pruning( |
| gf_group, cpi->sf.inter_sf.selective_ref_frame, |
| cpi->sf.tpl_sf.prune_ref_frames_in_tpl, frame_idx); |
| int gop_length = get_gop_length(gf_group); |
| int ref_frame_flags; |
| AV1_COMMON *cm = &cpi->common; |
| int rdmult, idx; |
| ThreadData *td = &cpi->td; |
| MACROBLOCK *x = &td->mb; |
| MACROBLOCKD *xd = &x->e_mbd; |
| TplTxfmStats *tpl_txfm_stats = &td->tpl_txfm_stats; |
| tpl_data->frame_idx = frame_idx; |
| tpl_reset_src_ref_frames(tpl_data); |
| av1_tile_init(&xd->tile, cm, 0, 0); |
| |
| const int boost_index = AOMMIN(15, (cpi->ppi->p_rc.gfu_boost / 100)); |
| const int layer_depth = AOMMIN(gf_group->layer_depth[cpi->gf_frame_index], 6); |
| const FRAME_TYPE frame_type = cm->current_frame.frame_type; |
| |
| // Setup scaling factor |
| av1_setup_scale_factors_for_frame( |
| &tpl_data->sf, this_frame->y_crop_width, this_frame->y_crop_height, |
| this_frame->y_crop_width, this_frame->y_crop_height); |
| |
| xd->cur_buf = this_frame; |
| |
| for (idx = 0; idx < INTER_REFS_PER_FRAME; ++idx) { |
| TplDepFrame *tpl_ref_frame = |
| &tpl_data->tpl_frame[tpl_frame->ref_map_index[idx]]; |
| tpl_data->ref_frame[idx] = tpl_ref_frame->rec_picture; |
| tpl_data->src_ref_frame[idx] = tpl_ref_frame->gf_picture; |
| ref_frame_display_indices[idx] = tpl_ref_frame->frame_display_index; |
| } |
| |
| // Store the reference frames based on priority order |
| for (int i = 0; i < INTER_REFS_PER_FRAME; ++i) { |
| ref_frames_ordered[i] = |
| tpl_data->ref_frame[ref_frame_priority_order[i] - 1]; |
| } |
| |
| // Work out which reference frame slots may be used. |
| ref_frame_flags = |
| get_ref_frame_flags(&cpi->sf, is_one_pass_rt_params(cpi), |
| ref_frames_ordered, cpi->ext_flags.ref_frame_flags); |
| |
| enforce_max_ref_frames(cpi, &ref_frame_flags, ref_frame_display_indices, |
| tpl_frame->frame_display_index); |
| |
| // Prune reference frames |
| for (idx = 0; idx < INTER_REFS_PER_FRAME; ++idx) { |
| if ((ref_frame_flags & (1 << idx)) == 0) { |
| tpl_data->ref_frame[idx] = NULL; |
| } |
| } |
| |
| // Skip motion estimation w.r.t. reference frames which are not |
| // considered in RD search, using "selective_ref_frame" speed feature. |
| // The reference frame pruning is not enabled for frames beyond the gop |
| // length, as there are fewer reference frames and the reference frames |
| // differ from the frames considered during RD search. |
| if (ref_pruning_enabled && (frame_idx < gop_length)) { |
| for (idx = 0; idx < INTER_REFS_PER_FRAME; ++idx) { |
| const MV_REFERENCE_FRAME refs[2] = { idx + 1, NONE_FRAME }; |
| if (prune_ref_by_selective_ref_frame(cpi, NULL, refs, |
| ref_frame_display_indices)) { |
| tpl_data->ref_frame[idx] = NULL; |
| } |
| } |
| } |
| |
| // Make a temporary mbmi for tpl model |
| MB_MODE_INFO mbmi; |
| memset(&mbmi, 0, sizeof(mbmi)); |
| MB_MODE_INFO *mbmi_ptr = &mbmi; |
| xd->mi = &mbmi_ptr; |
| |
| xd->block_ref_scale_factors[0] = &tpl_data->sf; |
| xd->block_ref_scale_factors[1] = &tpl_data->sf; |
| |
| const int base_qindex = |
| cpi->use_ducky_encode ? gf_group->q_val[frame_idx] : pframe_qindex; |
| // Get rd multiplier set up. |
| rdmult = (int)av1_compute_rd_mult( |
| base_qindex, cm->seq_params->bit_depth, |
| cpi->ppi->gf_group.update_type[cpi->gf_frame_index], layer_depth, |
| boost_index, frame_type, cpi->oxcf.q_cfg.use_fixed_qp_offsets, |
| is_stat_consumption_stage(cpi)); |
| |
| if (rdmult < 1) rdmult = 1; |
| av1_set_error_per_bit(&x->errorperbit, rdmult); |
| av1_set_sad_per_bit(cpi, &x->sadperbit, base_qindex); |
| |
| tpl_frame->is_valid = 1; |
| |
| cm->quant_params.base_qindex = base_qindex; |
| av1_frame_init_quantizer(cpi); |
| |
| const BitDepthInfo bd_info = get_bit_depth_info(xd); |
| const FRAME_UPDATE_TYPE update_type = |
| gf_group->update_type[cpi->gf_frame_index]; |
| tpl_frame->base_rdmult = av1_compute_rd_mult_based_on_qindex( |
| bd_info.bit_depth, update_type, base_qindex) / |
| 6; |
| |
| if (cpi->use_ducky_encode) |
| tpl_frame->base_rdmult = gf_group->rdmult_val[frame_idx]; |
| |
| av1_init_tpl_txfm_stats(tpl_txfm_stats); |
| |
| // Initialize x->mbmi_ext when compound predictions are enabled. |
| if (cpi->sf.tpl_sf.allow_compound_pred) av1_zero(x->mbmi_ext); |
| } |
| |
| // This function stores the motion estimation dependencies of all the blocks in |
| // a row |
| void av1_mc_flow_dispenser_row(AV1_COMP *cpi, TplTxfmStats *tpl_txfm_stats, |
| MACROBLOCK *x, int mi_row, BLOCK_SIZE bsize, |
| TX_SIZE tx_size) { |
| AV1_COMMON *const cm = &cpi->common; |
| MultiThreadInfo *const mt_info = &cpi->mt_info; |
| AV1TplRowMultiThreadInfo *const tpl_row_mt = &mt_info->tpl_row_mt; |
| const CommonModeInfoParams *const mi_params = &cm->mi_params; |
| const int mi_width = mi_size_wide[bsize]; |
| TplParams *const tpl_data = &cpi->ppi->tpl_data; |
| TplDepFrame *tpl_frame = &tpl_data->tpl_frame[tpl_data->frame_idx]; |
| MACROBLOCKD *xd = &x->e_mbd; |
| |
| const int tplb_cols_in_tile = |
| ROUND_POWER_OF_TWO(mi_params->mi_cols, mi_size_wide_log2[bsize]); |
| const int tplb_row = ROUND_POWER_OF_TWO(mi_row, mi_size_high_log2[bsize]); |
| assert(mi_size_high[bsize] == (1 << tpl_data->tpl_stats_block_mis_log2)); |
| assert(mi_size_wide[bsize] == (1 << tpl_data->tpl_stats_block_mis_log2)); |
| |
| for (int mi_col = 0, tplb_col_in_tile = 0; mi_col < mi_params->mi_cols; |
| mi_col += mi_width, tplb_col_in_tile++) { |
| (*tpl_row_mt->sync_read_ptr)(&tpl_data->tpl_mt_sync, tplb_row, |
| tplb_col_in_tile); |
| TplDepStats tpl_stats; |
| |
| // Motion estimation column boundary |
| av1_set_mv_col_limits(mi_params, &x->mv_limits, mi_col, mi_width, |
| tpl_data->border_in_pixels); |
| xd->mb_to_left_edge = -GET_MV_SUBPEL(mi_col * MI_SIZE); |
| xd->mb_to_right_edge = |
| GET_MV_SUBPEL(mi_params->mi_cols - mi_width - mi_col); |
| mode_estimation(cpi, tpl_txfm_stats, x, mi_row, mi_col, bsize, tx_size, |
| &tpl_stats); |
| |
| // Motion flow dependency dispenser. |
| tpl_model_store(tpl_frame->tpl_stats_ptr, mi_row, mi_col, tpl_frame->stride, |
| &tpl_stats, tpl_data->tpl_stats_block_mis_log2); |
| (*tpl_row_mt->sync_write_ptr)(&tpl_data->tpl_mt_sync, tplb_row, |
| tplb_col_in_tile, tplb_cols_in_tile); |
| } |
| } |
| |
| static AOM_INLINE void mc_flow_dispenser(AV1_COMP *cpi) { |
| AV1_COMMON *cm = &cpi->common; |
| const CommonModeInfoParams *const mi_params = &cm->mi_params; |
| ThreadData *td = &cpi->td; |
| MACROBLOCK *x = &td->mb; |
| MACROBLOCKD *xd = &x->e_mbd; |
| const BLOCK_SIZE bsize = |
| convert_length_to_bsize(cpi->ppi->tpl_data.tpl_bsize_1d); |
| const TX_SIZE tx_size = max_txsize_lookup[bsize]; |
| const int mi_height = mi_size_high[bsize]; |
| for (int mi_row = 0; mi_row < mi_params->mi_rows; mi_row += mi_height) { |
| // Motion estimation row boundary |
| av1_set_mv_row_limits(mi_params, &x->mv_limits, mi_row, mi_height, |
| cpi->ppi->tpl_data.border_in_pixels); |
| xd->mb_to_top_edge = -GET_MV_SUBPEL(mi_row * MI_SIZE); |
| xd->mb_to_bottom_edge = |
| GET_MV_SUBPEL((mi_params->mi_rows - mi_height - mi_row) * MI_SIZE); |
| av1_mc_flow_dispenser_row(cpi, &td->tpl_txfm_stats, x, mi_row, bsize, |
| tx_size); |
| } |
| } |
| |
| static void mc_flow_synthesizer(TplParams *tpl_data, int frame_idx, int mi_rows, |
| int mi_cols) { |
| if (!frame_idx) { |
| return; |
| } |
| const BLOCK_SIZE bsize = convert_length_to_bsize(tpl_data->tpl_bsize_1d); |
| const int mi_height = mi_size_high[bsize]; |
| const int mi_width = mi_size_wide[bsize]; |
| assert(mi_height == (1 << tpl_data->tpl_stats_block_mis_log2)); |
| assert(mi_width == (1 << tpl_data->tpl_stats_block_mis_log2)); |
| |
| for (int mi_row = 0; mi_row < mi_rows; mi_row += mi_height) { |
| for (int mi_col = 0; mi_col < mi_cols; mi_col += mi_width) { |
| tpl_model_update(tpl_data, mi_row, mi_col, frame_idx); |
| } |
| } |
| } |
| |
| static AOM_INLINE void init_gop_frames_for_tpl( |
| AV1_COMP *cpi, const EncodeFrameParams *const init_frame_params, |
| GF_GROUP *gf_group, int *tpl_group_frames, int *pframe_qindex) { |
| AV1_COMMON *cm = &cpi->common; |
| assert(cpi->gf_frame_index == 0); |
| *pframe_qindex = 0; |
| |
| RefFrameMapPair ref_frame_map_pairs[REF_FRAMES]; |
| init_ref_map_pair(cpi, ref_frame_map_pairs); |
| |
| int remapped_ref_idx[REF_FRAMES]; |
| |
| EncodeFrameParams frame_params = *init_frame_params; |
| TplParams *const tpl_data = &cpi->ppi->tpl_data; |
| |
| int ref_picture_map[REF_FRAMES]; |
| |
| for (int i = 0; i < REF_FRAMES; ++i) { |
| if (frame_params.frame_type == KEY_FRAME) { |
| tpl_data->tpl_frame[-i - 1].gf_picture = NULL; |
| tpl_data->tpl_frame[-i - 1].rec_picture = NULL; |
| tpl_data->tpl_frame[-i - 1].frame_display_index = 0; |
| } else { |
| tpl_data->tpl_frame[-i - 1].gf_picture = &cm->ref_frame_map[i]->buf; |
| tpl_data->tpl_frame[-i - 1].rec_picture = &cm->ref_frame_map[i]->buf; |
| tpl_data->tpl_frame[-i - 1].frame_display_index = |
| cm->ref_frame_map[i]->display_order_hint; |
| } |
| |
| ref_picture_map[i] = -i - 1; |
| } |
| |
| *tpl_group_frames = 0; |
| |
| int gf_index; |
| int process_frame_count = 0; |
| const int gop_length = get_gop_length(gf_group); |
| |
| for (gf_index = 0; gf_index < gop_length; ++gf_index) { |
| TplDepFrame *tpl_frame = &tpl_data->tpl_frame[gf_index]; |
| FRAME_UPDATE_TYPE frame_update_type = gf_group->update_type[gf_index]; |
| int lookahead_index = |
| gf_group->cur_frame_idx[gf_index] + gf_group->arf_src_offset[gf_index]; |
| frame_params.show_frame = frame_update_type != ARF_UPDATE && |
| frame_update_type != INTNL_ARF_UPDATE; |
| frame_params.show_existing_frame = |
| frame_update_type == INTNL_OVERLAY_UPDATE || |
| frame_update_type == OVERLAY_UPDATE; |
| frame_params.frame_type = gf_group->frame_type[gf_index]; |
| |
| if (frame_update_type == LF_UPDATE) |
| *pframe_qindex = gf_group->q_val[gf_index]; |
| |
| const struct lookahead_entry *buf = av1_lookahead_peek( |
| cpi->ppi->lookahead, lookahead_index, cpi->compressor_stage); |
| if (buf == NULL) break; |
| tpl_frame->gf_picture = &buf->img; |
| |
| // Use filtered frame buffer if available. This will make tpl stats more |
| // precise. |
| FRAME_DIFF frame_diff; |
| const YV12_BUFFER_CONFIG *tf_buf = |
| av1_tf_info_get_filtered_buf(&cpi->ppi->tf_info, gf_index, &frame_diff); |
| if (tf_buf != NULL) { |
| tpl_frame->gf_picture = tf_buf; |
| } |
| |
| // 'cm->current_frame.frame_number' is the display number |
| // of the current frame. |
| // 'lookahead_index' is frame offset within the gf group. |
| // 'lookahead_index + cm->current_frame.frame_number' |
| // is the display index of the frame. |
| tpl_frame->frame_display_index = |
| lookahead_index + cm->current_frame.frame_number; |
| assert(buf->display_idx == |
| cpi->frame_index_set.show_frame_count + lookahead_index); |
| |
| if (frame_update_type != OVERLAY_UPDATE && |
| frame_update_type != INTNL_OVERLAY_UPDATE) { |
| tpl_frame->rec_picture = &tpl_data->tpl_rec_pool[process_frame_count]; |
| tpl_frame->tpl_stats_ptr = tpl_data->tpl_stats_pool[process_frame_count]; |
| ++process_frame_count; |
| } |
| const int true_disp = (int)(tpl_frame->frame_display_index); |
| |
| av1_get_ref_frames(ref_frame_map_pairs, true_disp, cpi, gf_index, 0, |
| remapped_ref_idx); |
| |
| int refresh_mask = |
| av1_get_refresh_frame_flags(cpi, &frame_params, frame_update_type, |
| gf_index, true_disp, ref_frame_map_pairs); |
| |
| // Make the frames marked as is_frame_non_ref to non-reference frames. |
| if (cpi->ppi->gf_group.is_frame_non_ref[gf_index]) refresh_mask = 0; |
| |
| int refresh_frame_map_index = av1_get_refresh_ref_frame_map(refresh_mask); |
| |
| if (refresh_frame_map_index < REF_FRAMES && |
| refresh_frame_map_index != INVALID_IDX) { |
| ref_frame_map_pairs[refresh_frame_map_index].disp_order = |
| AOMMAX(0, true_disp); |
| ref_frame_map_pairs[refresh_frame_map_index].pyr_level = |
| get_true_pyr_level(gf_group->layer_depth[gf_index], true_disp, |
| cpi->ppi->gf_group.max_layer_depth); |
| } |
| |
| for (int i = LAST_FRAME; i <= ALTREF_FRAME; ++i) |
| tpl_frame->ref_map_index[i - LAST_FRAME] = |
| ref_picture_map[remapped_ref_idx[i - LAST_FRAME]]; |
| |
| if (refresh_mask) ref_picture_map[refresh_frame_map_index] = gf_index; |
| |
| ++*tpl_group_frames; |
| } |
| |
| const int tpl_extend = cpi->oxcf.gf_cfg.lag_in_frames - MAX_GF_INTERVAL; |
| int extend_frame_count = 0; |
| int extend_frame_length = AOMMIN( |
| tpl_extend, cpi->rc.frames_to_key - cpi->ppi->p_rc.baseline_gf_interval); |
| |
| int frame_display_index = gf_group->cur_frame_idx[gop_length - 1] + |
| gf_group->arf_src_offset[gop_length - 1] + 1; |
| |
| for (; |
| gf_index < MAX_TPL_FRAME_IDX && extend_frame_count < extend_frame_length; |
| ++gf_index) { |
| TplDepFrame *tpl_frame = &tpl_data->tpl_frame[gf_index]; |
| FRAME_UPDATE_TYPE frame_update_type = LF_UPDATE; |
| frame_params.show_frame = frame_update_type != ARF_UPDATE && |
| frame_update_type != INTNL_ARF_UPDATE; |
| frame_params.show_existing_frame = |
| frame_update_type == INTNL_OVERLAY_UPDATE; |
| frame_params.frame_type = INTER_FRAME; |
| |
| int lookahead_index = frame_display_index; |
| struct lookahead_entry *buf = av1_lookahead_peek( |
| cpi->ppi->lookahead, lookahead_index, cpi->compressor_stage); |
| |
| if (buf == NULL) break; |
| |
| tpl_frame->gf_picture = &buf->img; |
| tpl_frame->rec_picture = &tpl_data->tpl_rec_pool[process_frame_count]; |
| tpl_frame->tpl_stats_ptr = tpl_data->tpl_stats_pool[process_frame_count]; |
| // 'cm->current_frame.frame_number' is the display number |
| // of the current frame. |
| // 'frame_display_index' is frame offset within the gf group. |
| // 'frame_display_index + cm->current_frame.frame_number' |
| // is the display index of the frame. |
| tpl_frame->frame_display_index = |
| frame_display_index + cm->current_frame.frame_number; |
| |
| ++process_frame_count; |
| |
| gf_group->update_type[gf_index] = LF_UPDATE; |
| |
| #if CONFIG_BITRATE_ACCURACY && CONFIG_THREE_PASS |
| if (cpi->oxcf.pass == AOM_RC_SECOND_PASS) { |
| if (cpi->oxcf.rc_cfg.mode == AOM_Q) { |
| *pframe_qindex = cpi->oxcf.rc_cfg.cq_level; |
| } else if (cpi->oxcf.rc_cfg.mode == AOM_VBR) { |
| // TODO(angiebird): Find a more adaptive method to decide pframe_qindex |
| // override the pframe_qindex in the second pass when bitrate accuracy |
| // is on. We found that setting this pframe_qindex make the tpl stats |
| // more stable. |
| *pframe_qindex = 128; |
| } |
| } |
| #endif // CONFIG_BITRATE_ACCURACY && CONFIG_THREE_PASS |
| gf_group->q_val[gf_index] = *pframe_qindex; |
| const int true_disp = (int)(tpl_frame->frame_display_index); |
| av1_get_ref_frames(ref_frame_map_pairs, true_disp, cpi, gf_index, 0, |
| remapped_ref_idx); |
| int refresh_mask = |
| av1_get_refresh_frame_flags(cpi, &frame_params, frame_update_type, |
| gf_index, true_disp, ref_frame_map_pairs); |
| int refresh_frame_map_index = av1_get_refresh_ref_frame_map(refresh_mask); |
| |
| if (refresh_frame_map_index < REF_FRAMES && |
| refresh_frame_map_index != INVALID_IDX) { |
| ref_frame_map_pairs[refresh_frame_map_index].disp_order = |
| AOMMAX(0, true_disp); |
| ref_frame_map_pairs[refresh_frame_map_index].pyr_level = |
| get_true_pyr_level(gf_group->layer_depth[gf_index], true_disp, |
| cpi->ppi->gf_group.max_layer_depth); |
| } |
| |
| for (int i = LAST_FRAME; i <= ALTREF_FRAME; ++i) |
| tpl_frame->ref_map_index[i - LAST_FRAME] = |
| ref_picture_map[remapped_ref_idx[i - LAST_FRAME]]; |
| |
| tpl_frame->ref_map_index[ALTREF_FRAME - LAST_FRAME] = -1; |
| tpl_frame->ref_map_index[LAST3_FRAME - LAST_FRAME] = -1; |
| tpl_frame->ref_map_index[BWDREF_FRAME - LAST_FRAME] = -1; |
| tpl_frame->ref_map_index[ALTREF2_FRAME - LAST_FRAME] = -1; |
| |
| if (refresh_mask) ref_picture_map[refresh_frame_map_index] = gf_index; |
| |
| ++*tpl_group_frames; |
| ++extend_frame_count; |
| ++frame_display_index; |
| } |
| } |
| |
| void av1_init_tpl_stats(TplParams *const tpl_data) { |
| tpl_data->ready = 0; |
| set_tpl_stats_block_size(&tpl_data->tpl_stats_block_mis_log2, |
| &tpl_data->tpl_bsize_1d); |
| for (int frame_idx = 0; frame_idx < MAX_LENGTH_TPL_FRAME_STATS; ++frame_idx) { |
| TplDepFrame *tpl_frame = &tpl_data->tpl_stats_buffer[frame_idx]; |
| tpl_frame->is_valid = 0; |
| } |
| for (int frame_idx = 0; frame_idx < MAX_LAG_BUFFERS; ++frame_idx) { |
| TplDepFrame *tpl_frame = &tpl_data->tpl_stats_buffer[frame_idx]; |
| if (tpl_data->tpl_stats_pool[frame_idx] == NULL) continue; |
| memset(tpl_data->tpl_stats_pool[frame_idx], 0, |
| tpl_frame->height * tpl_frame->width * |
| sizeof(*tpl_frame->tpl_stats_ptr)); |
| } |
| } |
| |
| int av1_tpl_stats_ready(const TplParams *tpl_data, int gf_frame_index) { |
| if (tpl_data->ready == 0) { |
| return 0; |
| } |
| if (gf_frame_index >= MAX_TPL_FRAME_IDX) { |
| // The sub-GOP length exceeds the TPL buffer capacity. |
| // Hence the TPL related functions are disabled hereafter. |
| return 0; |
| } |
| return tpl_data->tpl_frame[gf_frame_index].is_valid; |
| } |
| |
| static AOM_INLINE int eval_gop_length(double *beta, int gop_eval) { |
| switch (gop_eval) { |
| case 1: |
| // Allow larger GOP size if the base layer ARF has higher dependency |
| // factor than the intermediate ARF and both ARFs have reasonably high |
| // dependency factors. |
| return (beta[0] >= beta[1] + 0.7) && beta[0] > 3.0; |
| case 2: |
| if ((beta[0] >= beta[1] + 0.4) && beta[0] > 1.6) |
| return 1; // Don't shorten the gf interval |
| else if ((beta[0] < beta[1] + 0.1) || beta[0] <= 1.4) |
| return 0; // Shorten the gf interval |
| else |
| return 2; // Cannot decide the gf interval, so redo the |
| // tpl stats calculation. |
| case 3: return beta[0] > 1.1; |
| default: return 2; |
| } |
| } |
| |
| // TODO(jingning): Restructure av1_rc_pick_q_and_bounds() to narrow down |
| // the scope of input arguments. |
| void av1_tpl_preload_rc_estimate(AV1_COMP *cpi, |
| const EncodeFrameParams *const frame_params) { |
| AV1_COMMON *cm = &cpi->common; |
| GF_GROUP *gf_group = &cpi->ppi->gf_group; |
| int bottom_index, top_index; |
| if (cpi->use_ducky_encode) return; |
| |
| cm->current_frame.frame_type = frame_params->frame_type; |
| for (int gf_index = cpi->gf_frame_index; gf_index < gf_group->size; |
| ++gf_index) { |
| cm->current_frame.frame_type = gf_group->frame_type[gf_index]; |
| cm->show_frame = gf_group->update_type[gf_index] != ARF_UPDATE && |
| gf_group->update_type[gf_index] != INTNL_ARF_UPDATE; |
| gf_group->q_val[gf_index] = av1_rc_pick_q_and_bounds( |
| cpi, cm->width, cm->height, gf_index, &bottom_index, &top_index); |
| } |
| } |
| |
| int av1_tpl_setup_stats(AV1_COMP *cpi, int gop_eval, |
| const EncodeFrameParams *const frame_params) { |
| #if CONFIG_COLLECT_COMPONENT_TIMING |
| start_timing(cpi, av1_tpl_setup_stats_time); |
| #endif |
| assert(cpi->gf_frame_index == 0); |
| AV1_COMMON *cm = &cpi->common; |
| MultiThreadInfo *const mt_info = &cpi->mt_info; |
| AV1TplRowMultiThreadInfo *const tpl_row_mt = &mt_info->tpl_row_mt; |
| GF_GROUP *gf_group = &cpi->ppi->gf_group; |
| EncodeFrameParams this_frame_params = *frame_params; |
| TplParams *const tpl_data = &cpi->ppi->tpl_data; |
| int approx_gop_eval = (gop_eval > 1); |
| int num_arf_layers = MAX_ARF_LAYERS; |
| |
| // When gop_eval is set to 2, tpl stats calculation is done for ARFs from base |
| // layer, (base+1) layer and (base+2) layer. When gop_eval is set to 3, |
| // tpl stats calculation is limited to ARFs from base layer and (base+1) |
| // layer. |
| if (approx_gop_eval) num_arf_layers = (gop_eval == 2) ? 3 : 2; |
| |
| if (cpi->superres_mode != AOM_SUPERRES_NONE) { |
| assert(cpi->superres_mode != AOM_SUPERRES_AUTO); |
| av1_init_tpl_stats(tpl_data); |
| return 0; |
| } |
| |
| cm->current_frame.frame_type = frame_params->frame_type; |
| for (int gf_index = cpi->gf_frame_index; gf_index < gf_group->size; |
| ++gf_index) { |
| cm->current_frame.frame_type = gf_group->frame_type[gf_index]; |
| av1_configure_buffer_updates(cpi, &this_frame_params.refresh_frame, |
| gf_group->update_type[gf_index], |
| gf_group->refbuf_state[gf_index], 0); |
| |
| memcpy(&cpi->refresh_frame, &this_frame_params.refresh_frame, |
| sizeof(cpi->refresh_frame)); |
| } |
| |
| int pframe_qindex; |
| int tpl_gf_group_frames; |
| init_gop_frames_for_tpl(cpi, frame_params, gf_group, &tpl_gf_group_frames, |
| &pframe_qindex); |
| |
| cpi->ppi->p_rc.base_layer_qp = pframe_qindex; |
| |
| av1_init_tpl_stats(tpl_data); |
| |
| tpl_row_mt->sync_read_ptr = av1_tpl_row_mt_sync_read_dummy; |
| tpl_row_mt->sync_write_ptr = av1_tpl_row_mt_sync_write_dummy; |
| |
| av1_setup_scale_factors_for_frame(&cm->sf_identity, cm->width, cm->height, |
| cm->width, cm->height); |
| |
| if (frame_params->frame_type == KEY_FRAME) { |
| av1_init_mv_probs(cm); |
| } |
| av1_fill_mv_costs(&cm->fc->nmvc, cm->features.cur_frame_force_integer_mv, |
| cm->features.allow_high_precision_mv, cpi->td.mb.mv_costs); |
| |
| const int gop_length = get_gop_length(gf_group); |
| const int num_planes = |
| cpi->sf.tpl_sf.use_y_only_rate_distortion ? 1 : av1_num_planes(cm); |
| // Backward propagation from tpl_group_frames to 1. |
| for (int frame_idx = cpi->gf_frame_index; frame_idx < tpl_gf_group_frames; |
| ++frame_idx) { |
| if (gf_group->update_type[frame_idx] == INTNL_OVERLAY_UPDATE || |
| gf_group->update_type[frame_idx] == OVERLAY_UPDATE) |
| continue; |
| |
| // When approx_gop_eval = 1, skip tpl stats calculation for higher layer |
| // frames and for frames beyond gop length. |
| if (approx_gop_eval && (gf_group->layer_depth[frame_idx] > num_arf_layers || |
| frame_idx >= gop_length)) |
| continue; |
| |
| init_mc_flow_dispenser(cpi, frame_idx, pframe_qindex); |
| if (mt_info->num_workers > 1) { |
| tpl_row_mt->sync_read_ptr = av1_tpl_row_mt_sync_read; |
| tpl_row_mt->sync_write_ptr = av1_tpl_row_mt_sync_write; |
| av1_mc_flow_dispenser_mt(cpi); |
| } else { |
| mc_flow_dispenser(cpi); |
| } |
| av1_tpl_txfm_stats_update_abs_coeff_mean(&cpi->td.tpl_txfm_stats); |
| av1_tpl_store_txfm_stats(tpl_data, &cpi->td.tpl_txfm_stats, frame_idx); |
| #if CONFIG_RATECTRL_LOG && CONFIG_THREE_PASS && CONFIG_BITRATE_ACCURACY |
| if (cpi->oxcf.pass == AOM_RC_THIRD_PASS) { |
| int frame_coding_idx = |
| av1_vbr_rc_frame_coding_idx(&cpi->vbr_rc_info, frame_idx); |
| rc_log_frame_stats(&cpi->rc_log, frame_coding_idx, |
| &cpi->td.tpl_txfm_stats); |
| } |
| #endif // CONFIG_RATECTRL_LOG |
| |
| aom_extend_frame_borders(tpl_data->tpl_frame[frame_idx].rec_picture, |
| num_planes); |
| } |
| |
| for (int frame_idx = tpl_gf_group_frames - 1; |
| frame_idx >= cpi->gf_frame_index; --frame_idx) { |
| if (gf_group->update_type[frame_idx] == INTNL_OVERLAY_UPDATE || |
| gf_group->update_type[frame_idx] == OVERLAY_UPDATE) |
| continue; |
| |
| if (approx_gop_eval && (gf_group->layer_depth[frame_idx] > num_arf_layers || |
| frame_idx >= gop_length)) |
| continue; |
| |
| mc_flow_synthesizer(tpl_data, frame_idx, cm->mi_params.mi_rows, |
| cm->mi_params.mi_cols); |
| } |
| |
| av1_configure_buffer_updates(cpi, &this_frame_params.refresh_frame, |
| gf_group->update_type[cpi->gf_frame_index], |
| gf_group->update_type[cpi->gf_frame_index], 0); |
| cm->current_frame.frame_type = frame_params->frame_type; |
| cm->show_frame = frame_params->show_frame; |
| |
| #if CONFIG_COLLECT_COMPONENT_TIMING |
| // Record the time if the function returns. |
| if (cpi->common.tiles.large_scale || gf_group->max_layer_depth_allowed == 0 || |
| !gop_eval) |
| end_timing(cpi, av1_tpl_setup_stats_time); |
| #endif |
| |
| if (!approx_gop_eval) { |
| tpl_data->ready = 1; |
| } |
| if (cpi->common.tiles.large_scale) return 0; |
| if (gf_group->max_layer_depth_allowed == 0) return 1; |
| if (!gop_eval) return 0; |
| assert(gf_group->arf_index >= 0); |
| |
| double beta[2] = { 0.0 }; |
| const int frame_idx_0 = gf_group->arf_index; |
| const int frame_idx_1 = |
| AOMMIN(tpl_gf_group_frames - 1, gf_group->arf_index + 1); |
| beta[0] = av1_tpl_get_frame_importance(tpl_data, frame_idx_0); |
| beta[1] = av1_tpl_get_frame_importance(tpl_data, frame_idx_1); |
| #if CONFIG_COLLECT_COMPONENT_TIMING |
| end_timing(cpi, av1_tpl_setup_stats_time); |
| #endif |
| return eval_gop_length(beta, gop_eval); |
| } |
| |
| void av1_tpl_rdmult_setup(AV1_COMP *cpi) { |
| const AV1_COMMON *const cm = &cpi->common; |
| const int tpl_idx = cpi->gf_frame_index; |
| |
| assert( |
| IMPLIES(cpi->ppi->gf_group.size > 0, tpl_idx < cpi->ppi->gf_group.size)); |
| |
| TplParams *const tpl_data = &cpi->ppi->tpl_data; |
| const TplDepFrame *const tpl_frame = &tpl_data->tpl_frame[tpl_idx]; |
| |
| if (!tpl_frame->is_valid) return; |
| |
| const TplDepStats *const tpl_stats = tpl_frame->tpl_stats_ptr; |
| const int tpl_stride = tpl_frame->stride; |
| const int mi_cols_sr = av1_pixels_to_mi(cm->superres_upscaled_width); |
| |
| const int block_size = BLOCK_16X16; |
| const int num_mi_w = mi_size_wide[block_size]; |
| const int num_mi_h = mi_size_high[block_size]; |
| const int num_cols = (mi_cols_sr + num_mi_w - 1) / num_mi_w; |
| const int num_rows = (cm->mi_params.mi_rows + num_mi_h - 1) / num_mi_h; |
| const double c = 1.2; |
| const int step = 1 << tpl_data->tpl_stats_block_mis_log2; |
| |
| // Loop through each 'block_size' X 'block_size' block. |
| for (int row = 0; row < num_rows; row++) { |
| for (int col = 0; col < num_cols; col++) { |
| double intra_cost = 0.0, mc_dep_cost = 0.0; |
| // Loop through each mi block. |
| for (int mi_row = row * num_mi_h; mi_row < (row + 1) * num_mi_h; |
| mi_row += step) { |
| for (int mi_col = col * num_mi_w; mi_col < (col + 1) * num_mi_w; |
| mi_col += step) { |
| if (mi_row >= cm->mi_params.mi_rows || mi_col >= mi_cols_sr) continue; |
| const TplDepStats *this_stats = &tpl_stats[av1_tpl_ptr_pos( |
| mi_row, mi_col, tpl_stride, tpl_data->tpl_stats_block_mis_log2)]; |
| int64_t mc_dep_delta = |
| RDCOST(tpl_frame->base_rdmult, this_stats->mc_dep_rate, |
| this_stats->mc_dep_dist); |
| intra_cost += (double)(this_stats->recrf_dist << RDDIV_BITS); |
| mc_dep_cost += |
| (double)(this_stats->recrf_dist << RDDIV_BITS) + mc_dep_delta; |
| } |
| } |
| const double rk = intra_cost / mc_dep_cost; |
| const int index = row * num_cols + col; |
| cpi->tpl_rdmult_scaling_factors[index] = rk / cpi->rd.r0 + c; |
| } |
| } |
| } |
| |
| void av1_tpl_rdmult_setup_sb(AV1_COMP *cpi, MACROBLOCK *const x, |
| BLOCK_SIZE sb_size, int mi_row, int mi_col) { |
| AV1_COMMON *const cm = &cpi->common; |
| GF_GROUP *gf_group = &cpi->ppi->gf_group; |
| assert(IMPLIES(cpi->ppi->gf_group.size > 0, |
| cpi->gf_frame_index < cpi->ppi->gf_group.size)); |
| const int tpl_idx = cpi->gf_frame_index; |
| |
| const int boost_index = AOMMIN(15, (cpi->ppi->p_rc.gfu_boost / 100)); |
| const int layer_depth = AOMMIN(gf_group->layer_depth[cpi->gf_frame_index], 6); |
| const FRAME_TYPE frame_type = cm->current_frame.frame_type; |
| |
| if (tpl_idx >= MAX_TPL_FRAME_IDX) return; |
| TplDepFrame *tpl_frame = &cpi->ppi->tpl_data.tpl_frame[tpl_idx]; |
| if (!tpl_frame->is_valid) return; |
| if (!is_frame_tpl_eligible(gf_group, cpi->gf_frame_index)) return; |
| if (cpi->oxcf.q_cfg.aq_mode != NO_AQ) return; |
| |
| const int mi_col_sr = |
| coded_to_superres_mi(mi_col, cm->superres_scale_denominator); |
| const int mi_cols_sr = av1_pixels_to_mi(cm->superres_upscaled_width); |
| const int sb_mi_width_sr = coded_to_superres_mi( |
| mi_size_wide[sb_size], cm->superres_scale_denominator); |
| |
| const int bsize_base = BLOCK_16X16; |
| const int num_mi_w = mi_size_wide[bsize_base]; |
| const int num_mi_h = mi_size_high[bsize_base]; |
| const int num_cols = (mi_cols_sr + num_mi_w - 1) / num_mi_w; |
| const int num_rows = (cm->mi_params.mi_rows + num_mi_h - 1) / num_mi_h; |
| const int num_bcols = (sb_mi_width_sr + num_mi_w - 1) / num_mi_w; |
| const int num_brows = (mi_size_high[sb_size] + num_mi_h - 1) / num_mi_h; |
| int row, col; |
| |
| double base_block_count = 0.0; |
| double log_sum = 0.0; |
| |
| for (row = mi_row / num_mi_w; |
| row < num_rows && row < mi_row / num_mi_w + num_brows; ++row) { |
| for (col = mi_col_sr / num_mi_h; |
| col < num_cols && col < mi_col_sr / num_mi_h + num_bcols; ++col) { |
| const int index = row * num_cols + col; |
| log_sum += log(cpi->tpl_rdmult_scaling_factors[index]); |
| base_block_count += 1.0; |
| } |
| } |
| |
| const CommonQuantParams *quant_params = &cm->quant_params; |
| |
| const int orig_qindex_rdmult = |
| quant_params->base_qindex + quant_params->y_dc_delta_q; |
| const int orig_rdmult = av1_compute_rd_mult( |
| orig_qindex_rdmult, cm->seq_params->bit_depth, |
| cpi->ppi->gf_group.update_type[cpi->gf_frame_index], layer_depth, |
| boost_index, frame_type, cpi->oxcf.q_cfg.use_fixed_qp_offsets, |
| is_stat_consumption_stage(cpi)); |
| |
| const int new_qindex_rdmult = quant_params->base_qindex + |
| x->rdmult_delta_qindex + |
| quant_params->y_dc_delta_q; |
| const int new_rdmult = av1_compute_rd_mult( |
| new_qindex_rdmult, cm->seq_params->bit_depth, |
| cpi->ppi->gf_group.update_type[cpi->gf_frame_index], layer_depth, |
| boost_index, frame_type, cpi->oxcf.q_cfg.use_fixed_qp_offsets, |
| is_stat_consumption_stage(cpi)); |
| |
| const double scaling_factor = (double)new_rdmult / (double)orig_rdmult; |
| |
| double scale_adj = log(scaling_factor) - log_sum / base_block_count; |
| scale_adj = exp_bounded(scale_adj); |
| |
| for (row = mi_row / num_mi_w; |
| row < num_rows && row < mi_row / num_mi_w + num_brows; ++row) { |
| for (col = mi_col_sr / num_mi_h; |
| col < num_cols && col < mi_col_sr / num_mi_h + num_bcols; ++col) { |
| const int index = row * num_cols + col; |
| cpi->ppi->tpl_sb_rdmult_scaling_factors[index] = |
| scale_adj * cpi->tpl_rdmult_scaling_factors[index]; |
| } |
| } |
| } |
| |
| double av1_exponential_entropy(double q_step, double b) { |
| b = AOMMAX(b, TPL_EPSILON); |
| double z = fmax(exp_bounded(-q_step / b), TPL_EPSILON); |
| return -log2(1 - z) - z * log2(z) / (1 - z); |
| } |
| |
| double av1_laplace_entropy(double q_step, double b, double zero_bin_ratio) { |
| // zero bin's size is zero_bin_ratio * q_step |
| // non-zero bin's size is q_step |
| b = AOMMAX(b, TPL_EPSILON); |
| double z = fmax(exp_bounded(-zero_bin_ratio / 2 * q_step / b), TPL_EPSILON); |
| double h = av1_exponential_entropy(q_step, b); |
| double r = -(1 - z) * log2(1 - z) - z * log2(z) + z * (h + 1); |
| return r; |
| } |
| |
| double av1_laplace_estimate_frame_rate(int q_index, int block_count, |
| const double *abs_coeff_mean, |
| int coeff_num) { |
| double zero_bin_ratio = 2; |
| double dc_q_step = av1_dc_quant_QTX(q_index, 0, AOM_BITS_8) / 4.; |
| double ac_q_step = av1_ac_quant_QTX(q_index, 0, AOM_BITS_8) / 4.; |
| double est_rate = 0; |
| // dc coeff |
| est_rate += av1_laplace_entropy(dc_q_step, abs_coeff_mean[0], zero_bin_ratio); |
| // ac coeff |
| for (int i = 1; i < coeff_num; ++i) { |
| est_rate += |
| av1_laplace_entropy(ac_q_step, abs_coeff_mean[i], zero_bin_ratio); |
| } |
| est_rate *= block_count; |
| return est_rate; |
| } |
| |
| double av1_estimate_coeff_entropy(double q_step, double b, |
| double zero_bin_ratio, int qcoeff) { |
| b = AOMMAX(b, TPL_EPSILON); |
| int abs_qcoeff = abs(qcoeff); |
| double z0 = fmax(exp_bounded(-zero_bin_ratio / 2 * q_step / b), TPL_EPSILON); |
| if (abs_qcoeff == 0) { |
| double r = -log2(1 - z0); |
| return r; |
| } else { |
| double z = fmax(exp_bounded(-q_step / b), TPL_EPSILON); |
| double r = 1 - log2(z0) - log2(1 - z) - (abs_qcoeff - 1) * log2(z); |
| return r; |
| } |
| } |
| |
| double av1_estimate_txfm_block_entropy(int q_index, |
| const double *abs_coeff_mean, |
| int *qcoeff_arr, int coeff_num) { |
| double zero_bin_ratio = 2; |
| double dc_q_step = av1_dc_quant_QTX(q_index, 0, AOM_BITS_8) / 4.; |
| double ac_q_step = av1_ac_quant_QTX(q_index, 0, AOM_BITS_8) / 4.; |
| double est_rate = 0; |
| // dc coeff |
| est_rate += av1_estimate_coeff_entropy(dc_q_step, abs_coeff_mean[0], |
| zero_bin_ratio, qcoeff_arr[0]); |
| // ac coeff |
| for (int i = 1; i < coeff_num; ++i) { |
| est_rate += av1_estimate_coeff_entropy(ac_q_step, abs_coeff_mean[i], |
| zero_bin_ratio, qcoeff_arr[i]); |
| } |
| return est_rate; |
| } |
| |
| #if CONFIG_RD_COMMAND |
| void av1_read_rd_command(const char *filepath, RD_COMMAND *rd_command) { |
| FILE *fptr = fopen(filepath, "r"); |
| fscanf(fptr, "%d", &rd_command->frame_count); |
| rd_command->frame_index = 0; |
| for (int i = 0; i < rd_command->frame_count; ++i) { |
| int option; |
| fscanf(fptr, "%d", &option); |
| rd_command->option_ls[i] = (RD_OPTION)option; |
| if (option == RD_OPTION_SET_Q) { |
| fscanf(fptr, "%d", &rd_command->q_index_ls[i]); |
| } else if (option == RD_OPTION_SET_Q_RDMULT) { |
| fscanf(fptr, "%d", &rd_command->q_index_ls[i]); |
| fscanf(fptr, "%d", &rd_command->rdmult_ls[i]); |
| } |
| } |
| fclose(fptr); |
| } |
| #endif // CONFIG_RD_COMMAND |
| |
| double av1_tpl_get_frame_importance(const TplParams *tpl_data, |
| int gf_frame_index) { |
| const TplDepFrame *tpl_frame = &tpl_data->tpl_frame[gf_frame_index]; |
| const TplDepStats *tpl_stats = tpl_frame->tpl_stats_ptr; |
| |
| const int tpl_stride = tpl_frame->stride; |
| double intra_cost_base = 0; |
| double mc_dep_cost_base = 0; |
| double cbcmp_base = 1; |
| const int step = 1 << tpl_data->tpl_stats_block_mis_log2; |
| |
| for (int row = 0; row < tpl_frame->mi_rows; row += step) { |
| for (int col = 0; col < tpl_frame->mi_cols; col += step) { |
| const TplDepStats *this_stats = &tpl_stats[av1_tpl_ptr_pos( |
| row, col, tpl_stride, tpl_data->tpl_stats_block_mis_log2)]; |
| double cbcmp = (double)this_stats->srcrf_dist; |
| const int64_t mc_dep_delta = |
| RDCOST(tpl_frame->base_rdmult, this_stats->mc_dep_rate, |
| this_stats->mc_dep_dist); |
| double dist_scaled = (double)(this_stats->recrf_dist << RDDIV_BITS); |
| intra_cost_base += log(dist_scaled) * cbcmp; |
| mc_dep_cost_base += log(dist_scaled + mc_dep_delta) * cbcmp; |
| cbcmp_base += cbcmp; |
| } |
| } |
| return exp((mc_dep_cost_base - intra_cost_base) / cbcmp_base); |
| } |
| |
| double av1_tpl_get_qstep_ratio(const TplParams *tpl_data, int gf_frame_index) { |
| if (!av1_tpl_stats_ready(tpl_data, gf_frame_index)) { |
| return 1; |
| } |
| const double frame_importance = |
| av1_tpl_get_frame_importance(tpl_data, gf_frame_index); |
| return sqrt(1 / frame_importance); |
| } |
| |
| int av1_get_q_index_from_qstep_ratio(int leaf_qindex, double qstep_ratio, |
| aom_bit_depth_t bit_depth) { |
| const double leaf_qstep = av1_dc_quant_QTX(leaf_qindex, 0, bit_depth); |
| const double target_qstep = leaf_qstep * qstep_ratio; |
| int qindex = leaf_qindex; |
| if (qstep_ratio < 1.0) { |
| for (qindex = leaf_qindex; qindex > 0; --qindex) { |
| const double qstep = av1_dc_quant_QTX(qindex, 0, bit_depth); |
| if (qstep <= target_qstep) break; |
| } |
| } else { |
| for (qindex = leaf_qindex; qindex <= MAXQ; ++qindex) { |
| const double qstep = av1_dc_quant_QTX(qindex, 0, bit_depth); |
| if (qstep >= target_qstep) break; |
| } |
| } |
| return qindex; |
| } |
| |
| int av1_tpl_get_q_index(const TplParams *tpl_data, int gf_frame_index, |
| int leaf_qindex, aom_bit_depth_t bit_depth) { |
| const double qstep_ratio = av1_tpl_get_qstep_ratio(tpl_data, gf_frame_index); |
| return av1_get_q_index_from_qstep_ratio(leaf_qindex, qstep_ratio, bit_depth); |
| } |
| |
| #if CONFIG_BITRATE_ACCURACY |
| void av1_vbr_rc_init(VBR_RATECTRL_INFO *vbr_rc_info, double total_bit_budget, |
| int show_frame_count) { |
| av1_zero(*vbr_rc_info); |
| vbr_rc_info->ready = 0; |
| vbr_rc_info->total_bit_budget = total_bit_budget; |
| vbr_rc_info->show_frame_count = show_frame_count; |
| const double scale_factors[FRAME_UPDATE_TYPES] = { 0.94559, 0.94559, 1, |
| 0.94559, 1, 1, |
| 0.94559 }; |
| |
| // TODO(angiebird): Based on the previous code, only the scale factor 0.94559 |
| // will be used in most of the cases with --limi=17. Figure out if the |
| // following scale factors works better. |
| // const double scale_factors[FRAME_UPDATE_TYPES] = { 0.94559, 0.12040, 1, |
| // 1.10199, 1, 1, |
| // 0.16393 }; |
| |
| const double mv_scale_factors[FRAME_UPDATE_TYPES] = { 3, 3, 3, 3, 3, 3, 3 }; |
| memcpy(vbr_rc_info->scale_factors, scale_factors, |
| sizeof(scale_factors[0]) * FRAME_UPDATE_TYPES); |
| memcpy(vbr_rc_info->mv_scale_factors, mv_scale_factors, |
| sizeof(mv_scale_factors[0]) * FRAME_UPDATE_TYPES); |
| |
| vbr_rc_reset_gop_data(vbr_rc_info); |
| #if CONFIG_THREE_PASS |
| // TODO(angiebird): Explain why we use -1 here |
| vbr_rc_info->cur_gop_idx = -1; |
| vbr_rc_info->gop_count = 0; |
| vbr_rc_info->total_frame_count = 0; |
| #endif // CONFIG_THREE_PASS |
| } |
| |
| #if CONFIG_THREE_PASS |
| int av1_vbr_rc_frame_coding_idx(const VBR_RATECTRL_INFO *vbr_rc_info, |
| int gf_frame_index) { |
| int gop_idx = vbr_rc_info->cur_gop_idx; |
| int gop_start_idx = vbr_rc_info->gop_start_idx_list[gop_idx]; |
| return gop_start_idx + gf_frame_index; |
| } |
| |
| void av1_vbr_rc_append_tpl_info(VBR_RATECTRL_INFO *vbr_rc_info, |
| const TPL_INFO *tpl_info) { |
| int gop_start_idx = vbr_rc_info->total_frame_count; |
| vbr_rc_info->gop_start_idx_list[vbr_rc_info->gop_count] = gop_start_idx; |
| vbr_rc_info->gop_length_list[vbr_rc_info->gop_count] = tpl_info->gf_length; |
| assert(gop_start_idx + tpl_info->gf_length <= VBR_RC_INFO_MAX_FRAMES); |
| for (int i = 0; i < tpl_info->gf_length; ++i) { |
| vbr_rc_info->txfm_stats_list[gop_start_idx + i] = |
| tpl_info->txfm_stats_list[i]; |
| vbr_rc_info->qstep_ratio_list[gop_start_idx + i] = |
| tpl_info->qstep_ratio_ls[i]; |
| vbr_rc_info->update_type_list[gop_start_idx + i] = |
| tpl_info->update_type_list[i]; |
| } |
| vbr_rc_info->total_frame_count += tpl_info->gf_length; |
| vbr_rc_info->gop_count++; |
| } |
| #endif // CONFIG_THREE_PASS |
| |
| void av1_vbr_rc_set_gop_bit_budget(VBR_RATECTRL_INFO *vbr_rc_info, |
| int gop_showframe_count) { |
| vbr_rc_info->gop_showframe_count = gop_showframe_count; |
| vbr_rc_info->gop_bit_budget = vbr_rc_info->total_bit_budget * |
| gop_showframe_count / |
| vbr_rc_info->show_frame_count; |
| } |
| |
| void av1_vbr_rc_compute_q_indices(int base_q_index, int frame_count, |
| const double *qstep_ratio_list, |
| aom_bit_depth_t bit_depth, |
| int *q_index_list) { |
| for (int i = 0; i < frame_count; ++i) { |
| q_index_list[i] = av1_get_q_index_from_qstep_ratio( |
| base_q_index, qstep_ratio_list[i], bit_depth); |
| } |
| } |
| |
| double av1_vbr_rc_info_estimate_gop_bitrate( |
| int base_q_index, aom_bit_depth_t bit_depth, |
| const double *update_type_scale_factors, int frame_count, |
| const FRAME_UPDATE_TYPE *update_type_list, const double *qstep_ratio_list, |
| const TplTxfmStats *stats_list, int *q_index_list, |
| double *estimated_bitrate_byframe) { |
| av1_vbr_rc_compute_q_indices(base_q_index, frame_count, qstep_ratio_list, |
| bit_depth, q_index_list); |
| double estimated_gop_bitrate = 0; |
| for (int frame_index = 0; frame_index < frame_count; frame_index++) { |
| const TplTxfmStats *frame_stats = &stats_list[frame_index]; |
| double frame_bitrate = 0; |
| if (frame_stats->ready) { |
| int q_index = q_index_list[frame_index]; |
| |
| frame_bitrate = av1_laplace_estimate_frame_rate( |
| q_index, frame_stats->txfm_block_count, frame_stats->abs_coeff_mean, |
| frame_stats->coeff_num); |
| } |
| FRAME_UPDATE_TYPE update_type = update_type_list[frame_index]; |
| estimated_gop_bitrate += |
| frame_bitrate * update_type_scale_factors[update_type]; |
| if (estimated_bitrate_byframe != NULL) { |
| estimated_bitrate_byframe[frame_index] = frame_bitrate; |
| } |
| } |
| return estimated_gop_bitrate; |
| } |
| |
| int av1_vbr_rc_info_estimate_base_q( |
| double bit_budget, aom_bit_depth_t bit_depth, |
| const double *update_type_scale_factors, int frame_count, |
| const FRAME_UPDATE_TYPE *update_type_list, const double *qstep_ratio_list, |
| const TplTxfmStats *stats_list, int *q_index_list, |
| double *estimated_bitrate_byframe) { |
| int q_max = 255; // Maximum q value. |
| int q_min = 0; // Minimum q value. |
| int q = (q_max + q_min) / 2; |
| |
| double q_max_estimate = av1_vbr_rc_info_estimate_gop_bitrate( |
| q_max, bit_depth, update_type_scale_factors, frame_count, |
| update_type_list, qstep_ratio_list, stats_list, q_index_list, |
| estimated_bitrate_byframe); |
| |
| double q_min_estimate = av1_vbr_rc_info_estimate_gop_bitrate( |
| q_min, bit_depth, update_type_scale_factors, frame_count, |
| update_type_list, qstep_ratio_list, stats_list, q_index_list, |
| estimated_bitrate_byframe); |
| while (q_min + 1 < q_max) { |
| double estimate = av1_vbr_rc_info_estimate_gop_bitrate( |
| q, bit_depth, update_type_scale_factors, frame_count, update_type_list, |
| qstep_ratio_list, stats_list, q_index_list, estimated_bitrate_byframe); |
| if (estimate > bit_budget) { |
| q_min = q; |
| q_min_estimate = estimate; |
| } else { |
| q_max = q; |
| q_max_estimate = estimate; |
| } |
| q = (q_max + q_min) / 2; |
| } |
| // Pick the estimate that lands closest to the budget. |
| if (fabs(q_max_estimate - bit_budget) < fabs(q_min_estimate - bit_budget)) { |
| q = q_max; |
| } else { |
| q = q_min; |
| } |
| // Update q_index_list and vbr_rc_info. |
| av1_vbr_rc_info_estimate_gop_bitrate( |
| q, bit_depth, update_type_scale_factors, frame_count, update_type_list, |
| qstep_ratio_list, stats_list, q_index_list, estimated_bitrate_byframe); |
| return q; |
| } |
| void av1_vbr_rc_update_q_index_list(VBR_RATECTRL_INFO *vbr_rc_info, |
| const TplParams *tpl_data, |
| const GF_GROUP *gf_group, |
| aom_bit_depth_t bit_depth) { |
| vbr_rc_info->q_index_list_ready = 1; |
| double gop_bit_budget = vbr_rc_info->gop_bit_budget; |
| |
| for (int i = 0; i < gf_group->size; i++) { |
| vbr_rc_info->qstep_ratio_list[i] = av1_tpl_get_qstep_ratio(tpl_data, i); |
| } |
| |
| double mv_bits = 0; |
| for (int i = 0; i < gf_group->size; i++) { |
| double frame_mv_bits = 0; |
| if (av1_tpl_stats_ready(tpl_data, i)) { |
| TplDepFrame *tpl_frame = &tpl_data->tpl_frame[i]; |
| frame_mv_bits = av1_tpl_compute_frame_mv_entropy( |
| tpl_frame, tpl_data->tpl_stats_block_mis_log2); |
| FRAME_UPDATE_TYPE updae_type = gf_group->update_type[i]; |
| mv_bits += frame_mv_bits * vbr_rc_info->mv_scale_factors[updae_type]; |
| } |
| } |
| |
| mv_bits = AOMMIN(mv_bits, 0.6 * gop_bit_budget); |
| gop_bit_budget -= mv_bits; |
| |
| vbr_rc_info->base_q_index = av1_vbr_rc_info_estimate_base_q( |
| gop_bit_budget, bit_depth, vbr_rc_info->scale_factors, gf_group->size, |
| gf_group->update_type, vbr_rc_info->qstep_ratio_list, |
| tpl_data->txfm_stats_list, vbr_rc_info->q_index_list, NULL); |
| } |
| |
| #endif // CONFIG_BITRATE_ACCURACY |
| |
| // Use upper and left neighbor block as the reference MVs. |
| // Compute the minimum difference between current MV and reference MV. |
| int_mv av1_compute_mv_difference(const TplDepFrame *tpl_frame, int row, int col, |
| int step, int tpl_stride, int right_shift) { |
| const TplDepStats *tpl_stats = |
| &tpl_frame |
| ->tpl_stats_ptr[av1_tpl_ptr_pos(row, col, tpl_stride, right_shift)]; |
| int_mv current_mv = tpl_stats->mv[tpl_stats->ref_frame_index[0]]; |
| int current_mv_magnitude = |
| abs(current_mv.as_mv.row) + abs(current_mv.as_mv.col); |
| |
| // Retrieve the up and left neighbors. |
| int up_error = INT_MAX; |
| int_mv up_mv_diff; |
| if (row - step >= 0) { |
| tpl_stats = &tpl_frame->tpl_stats_ptr[av1_tpl_ptr_pos( |
| row - step, col, tpl_stride, right_shift)]; |
| up_mv_diff = tpl_stats->mv[tpl_stats->ref_frame_index[0]]; |
| up_mv_diff.as_mv.row = current_mv.as_mv.row - up_mv_diff.as_mv.row; |
| up_mv_diff.as_mv.col = current_mv.as_mv.col - up_mv_diff.as_mv.col; |
| up_error = abs(up_mv_diff.as_mv.row) + abs(up_mv_diff.as_mv.col); |
| } |
| |
| int left_error = INT_MAX; |
| int_mv left_mv_diff; |
| if (col - step >= 0) { |
| tpl_stats = &tpl_frame->tpl_stats_ptr[av1_tpl_ptr_pos( |
| row, col - step, tpl_stride, right_shift)]; |
| left_mv_diff = tpl_stats->mv[tpl_stats->ref_frame_index[0]]; |
| left_mv_diff.as_mv.row = current_mv.as_mv.row - left_mv_diff.as_mv.row; |
| left_mv_diff.as_mv.col = current_mv.as_mv.col - left_mv_diff.as_mv.col; |
| left_error = abs(left_mv_diff.as_mv.row) + abs(left_mv_diff.as_mv.col); |
| } |
| |
| // Return the MV with the minimum distance from current. |
| if (up_error < left_error && up_error < current_mv_magnitude) { |
| return up_mv_diff; |
| } else if (left_error < up_error && left_error < current_mv_magnitude) { |
| return left_mv_diff; |
| } |
| return current_mv; |
| } |
| |
| /* Compute the entropy of motion vectors for a single frame. */ |
| double av1_tpl_compute_frame_mv_entropy(const TplDepFrame *tpl_frame, |
| uint8_t right_shift) { |
| if (!tpl_frame->is_valid) { |
| return 0; |
| } |
| |
| int count_row[500] = { 0 }; |
| int count_col[500] = { 0 }; |
| int n = 0; // number of MVs to process |
| |
| const int tpl_stride = tpl_frame->stride; |
| const int step = 1 << right_shift; |
| |
| for (int row = 0; row < tpl_frame->mi_rows; row += step) { |
| for (int col = 0; col < tpl_frame->mi_cols; col += step) { |
| int_mv mv = av1_compute_mv_difference(tpl_frame, row, col, step, |
| tpl_stride, right_shift); |
| count_row[clamp(mv.as_mv.row, 0, 499)] += 1; |
| count_col[clamp(mv.as_mv.row, 0, 499)] += 1; |
| n += 1; |
| } |
| } |
| |
| // Estimate the bits used using the entropy formula. |
| double rate_row = 0; |
| double rate_col = 0; |
| for (int i = 0; i < 500; i++) { |
| if (count_row[i] != 0) { |
| double p = count_row[i] / (double)n; |
| rate_row += count_row[i] * -log2(p); |
| } |
| if (count_col[i] != 0) { |
| double p = count_col[i] / (double)n; |
| rate_col += count_col[i] * -log2(p); |
| } |
| } |
| |
| return rate_row + rate_col; |
| } |