/*
 * Copyright (c) 2016, Alliance for Open Media. All rights reserved.
 *
 * This source code is subject to the terms of the BSD 2 Clause License and
 * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License
 * was not distributed with this source code in the LICENSE file, you can
 * obtain it at www.aomedia.org/license/software. If the Alliance for Open
 * Media Patent License 1.0 was not distributed with this source code in the
 * PATENTS file, you can obtain it at www.aomedia.org/license/patent.
 */

#ifndef AOM_AV1_COMMON_RESTORATION_H_
#define AOM_AV1_COMMON_RESTORATION_H_

#include "aom_ports/mem.h"
#include "config/aom_config.h"

#include "av1/common/blockd.h"
#include "av1/common/enums.h"

#ifdef __cplusplus
extern "C" {
#endif

/*! @file */

/*!\cond */

// Border for Loop restoration buffer
#define AOM_RESTORATION_FRAME_BORDER 32
#define CLIP(x, lo, hi) ((x) < (lo) ? (lo) : (x) > (hi) ? (hi) : (x))
#define RINT(x) ((x) < 0 ? (int)((x) - 0.5) : (int)((x) + 0.5))

#define RESTORATION_PROC_UNIT_SIZE 64

// Filter stripe grid offset upwards compared to the superblock grid
#define RESTORATION_UNIT_OFFSET 8

#define SGRPROJ_BORDER_VERT 3  // Vertical border used for Sgr
#define SGRPROJ_BORDER_HORZ 3  // Horizontal border used for Sgr

#define WIENER_BORDER_VERT 2  // Vertical border used for Wiener
#define WIENER_HALFWIN 3
#define WIENER_BORDER_HORZ (WIENER_HALFWIN)  // Horizontal border for Wiener

// RESTORATION_BORDER_VERT determines line buffer requirement for LR.
// Should be set at the max of SGRPROJ_BORDER_VERT and WIENER_BORDER_VERT.
// Note the line buffer needed is twice the value of this macro.
#if SGRPROJ_BORDER_VERT >= WIENER_BORDER_VERT
#define RESTORATION_BORDER_VERT (SGRPROJ_BORDER_VERT)
#else
#define RESTORATION_BORDER_VERT (WIENER_BORDER_VERT)
#endif  // SGRPROJ_BORDER_VERT >= WIENER_BORDER_VERT

#if SGRPROJ_BORDER_HORZ >= WIENER_BORDER_HORZ
#define RESTORATION_BORDER_HORZ (SGRPROJ_BORDER_HORZ)
#else
#define RESTORATION_BORDER_HORZ (WIENER_BORDER_HORZ)
#endif  // SGRPROJ_BORDER_VERT >= WIENER_BORDER_VERT

// How many border pixels do we need for each processing unit?
#define RESTORATION_BORDER 3

// How many rows of deblocked pixels do we save above/below each processing
// stripe?
#define RESTORATION_CTX_VERT 2

// Additional pixels to the left and right in above/below buffers
// It is RESTORATION_BORDER_HORZ rounded up to get nicer buffer alignment
#define RESTORATION_EXTRA_HORZ 4

// Pad up to 20 more (may be much less is needed)
#define RESTORATION_PADDING 20
#define RESTORATION_PROC_UNIT_PELS                             \
  ((RESTORATION_PROC_UNIT_SIZE + RESTORATION_BORDER_HORZ * 2 + \
    RESTORATION_PADDING) *                                     \
   (RESTORATION_PROC_UNIT_SIZE + RESTORATION_BORDER_VERT * 2 + \
    RESTORATION_PADDING))

#define RESTORATION_UNITSIZE_MAX 256
#define RESTORATION_UNITPELS_HORZ_MAX \
  (RESTORATION_UNITSIZE_MAX * 3 / 2 + 2 * RESTORATION_BORDER_HORZ + 16)
#define RESTORATION_UNITPELS_VERT_MAX                                \
  ((RESTORATION_UNITSIZE_MAX * 3 / 2 + 2 * RESTORATION_BORDER_VERT + \
    RESTORATION_UNIT_OFFSET))
#define RESTORATION_UNITPELS_MAX \
  (RESTORATION_UNITPELS_HORZ_MAX * RESTORATION_UNITPELS_VERT_MAX)

// Two 32-bit buffers needed for the restored versions from two filters
// TODO(debargha, rupert): Refactor to not need the large tile size to be
// stored on the decoder side.
#define SGRPROJ_TMPBUF_SIZE (RESTORATION_UNITPELS_MAX * 2 * sizeof(int32_t))

#define SGRPROJ_EXTBUF_SIZE (0)
#define SGRPROJ_PARAMS_BITS 4
#define SGRPROJ_PARAMS (1 << SGRPROJ_PARAMS_BITS)

// Precision bits for projection
#define SGRPROJ_PRJ_BITS 7
// Restoration precision bits generated higher than source before projection
#define SGRPROJ_RST_BITS 4
// Internal precision bits for core selfguided_restoration
#define SGRPROJ_SGR_BITS 8
#define SGRPROJ_SGR (1 << SGRPROJ_SGR_BITS)

#define SGRPROJ_PRJ_MIN0 (-(1 << SGRPROJ_PRJ_BITS) * 3 / 4)
#define SGRPROJ_PRJ_MAX0 (SGRPROJ_PRJ_MIN0 + (1 << SGRPROJ_PRJ_BITS) - 1)
#define SGRPROJ_PRJ_MIN1 (-(1 << SGRPROJ_PRJ_BITS) / 4)
#define SGRPROJ_PRJ_MAX1 (SGRPROJ_PRJ_MIN1 + (1 << SGRPROJ_PRJ_BITS) - 1)

#define SGRPROJ_PRJ_SUBEXP_K 4

#define SGRPROJ_BITS (SGRPROJ_PRJ_BITS * 2 + SGRPROJ_PARAMS_BITS)

#define MAX_RADIUS 2  // Only 1, 2, 3 allowed
#define MAX_NELEM ((2 * MAX_RADIUS + 1) * (2 * MAX_RADIUS + 1))
#define SGRPROJ_MTABLE_BITS 20
#define SGRPROJ_RECIP_BITS 12

#define WIENER_HALFWIN1 (WIENER_HALFWIN + 1)
#define WIENER_WIN (2 * WIENER_HALFWIN + 1)
#define WIENER_WIN2 ((WIENER_WIN) * (WIENER_WIN))
#define WIENER_TMPBUF_SIZE (0)
#define WIENER_EXTBUF_SIZE (0)

// If WIENER_WIN_CHROMA == WIENER_WIN - 2, that implies 5x5 filters are used for
// chroma. To use 7x7 for chroma set WIENER_WIN_CHROMA to WIENER_WIN.
#define WIENER_WIN_CHROMA (WIENER_WIN - 2)
#define WIENER_WIN_REDUCED (WIENER_WIN - 2)
#define WIENER_WIN2_CHROMA ((WIENER_WIN_CHROMA) * (WIENER_WIN_CHROMA))
#define WIENER_STATS_DOWNSAMPLE_FACTOR 4

#define WIENER_FILT_PREC_BITS 7
#define WIENER_FILT_STEP (1 << WIENER_FILT_PREC_BITS)

// Central values for the taps
#define WIENER_FILT_TAP0_MIDV (3)
#define WIENER_FILT_TAP1_MIDV (-7)
#define WIENER_FILT_TAP2_MIDV (15)
#define WIENER_FILT_TAP3_MIDV                                              \
  (WIENER_FILT_STEP - 2 * (WIENER_FILT_TAP0_MIDV + WIENER_FILT_TAP1_MIDV + \
                           WIENER_FILT_TAP2_MIDV))

#define WIENER_FILT_TAP0_BITS 4
#define WIENER_FILT_TAP1_BITS 5
#define WIENER_FILT_TAP2_BITS 6

#define WIENER_FILT_BITS \
  ((WIENER_FILT_TAP0_BITS + WIENER_FILT_TAP1_BITS + WIENER_FILT_TAP2_BITS) * 2)

#define WIENER_FILT_TAP0_MINV \
  (WIENER_FILT_TAP0_MIDV - (1 << WIENER_FILT_TAP0_BITS) / 2)
#define WIENER_FILT_TAP1_MINV \
  (WIENER_FILT_TAP1_MIDV - (1 << WIENER_FILT_TAP1_BITS) / 2)
#define WIENER_FILT_TAP2_MINV \
  (WIENER_FILT_TAP2_MIDV - (1 << WIENER_FILT_TAP2_BITS) / 2)

#define WIENER_FILT_TAP0_MAXV \
  (WIENER_FILT_TAP0_MIDV - 1 + (1 << WIENER_FILT_TAP0_BITS) / 2)
#define WIENER_FILT_TAP1_MAXV \
  (WIENER_FILT_TAP1_MIDV - 1 + (1 << WIENER_FILT_TAP1_BITS) / 2)
#define WIENER_FILT_TAP2_MAXV \
  (WIENER_FILT_TAP2_MIDV - 1 + (1 << WIENER_FILT_TAP2_BITS) / 2)

#define WIENER_FILT_TAP0_SUBEXP_K 1
#define WIENER_FILT_TAP1_SUBEXP_K 2
#define WIENER_FILT_TAP2_SUBEXP_K 3

// Max of SGRPROJ_TMPBUF_SIZE, DOMAINTXFMRF_TMPBUF_SIZE, WIENER_TMPBUF_SIZE
#define RESTORATION_TMPBUF_SIZE (SGRPROJ_TMPBUF_SIZE)

// Max of SGRPROJ_EXTBUF_SIZE, WIENER_EXTBUF_SIZE
#define RESTORATION_EXTBUF_SIZE (WIENER_EXTBUF_SIZE)

// Check the assumptions of the existing code
#if SUBPEL_TAPS != WIENER_WIN + 1
#error "Wiener filter currently only works if SUBPEL_TAPS == WIENER_WIN + 1"
#endif
#if WIENER_FILT_PREC_BITS != 7
#error "Wiener filter currently only works if WIENER_FILT_PREC_BITS == 7"
#endif

typedef struct {
  int r[2];  // radii
  int s[2];  // sgr parameters for r[0] and r[1], based on GenSgrprojVtable()
} sgr_params_type;
/*!\endcond */

/*!\brief Parameters related to Restoration Unit Info */
typedef struct {
  /*!
   * restoration type
   */
  RestorationType restoration_type;

  /*!
   * Wiener filter parameters if restoration_type indicates Wiener
   */
  WienerInfo wiener_info;

  /*!
   * Sgrproj filter parameters if restoration_type indicates Sgrproj
   */
  SgrprojInfo sgrproj_info;
} RestorationUnitInfo;

/*!\cond */

// A restoration line buffer needs space for two lines plus a horizontal filter
// margin of RESTORATION_EXTRA_HORZ on each side.
#define RESTORATION_LINEBUFFER_WIDTH \
  (RESTORATION_UNITSIZE_MAX * 3 / 2 + 2 * RESTORATION_EXTRA_HORZ)

typedef struct {
  // Temporary buffers to save/restore 3 lines above/below the restoration
  // stripe.
  uint16_t tmp_save_above[RESTORATION_BORDER][RESTORATION_LINEBUFFER_WIDTH];
  uint16_t tmp_save_below[RESTORATION_BORDER][RESTORATION_LINEBUFFER_WIDTH];
} RestorationLineBuffers;
/*!\endcond */

/*!\brief Parameters related to Restoration Stripe boundaries */
typedef struct {
  /*!
   * stripe boundary above
   */
  uint8_t *stripe_boundary_above;

  /*!
   * stripe boundary below
   */
  uint8_t *stripe_boundary_below;

  /*!
   * strides for stripe boundaries above and below
   */
  int stripe_boundary_stride;

  /*!
   * size of stripe boundaries above and below
   */
  int stripe_boundary_size;
} RestorationStripeBoundaries;

/*!\brief Parameters related to Restoration Info */
typedef struct {
  /*!
   * Restoration type for frame
   */
  RestorationType frame_restoration_type;

  /*!
   * Restoration unit size
   */
  int restoration_unit_size;

  /**
   * \name Fields allocated and initialised by av1_alloc_restoration_struct.
   */
  /**@{*/
  /*!
   * Total number of restoration units in this plane
   */
  int num_rest_units;

  /*!
   * Number of vertical restoration units in this plane
   */
  int vert_units;

  /*!
   * Number of horizontal restoration units in this plane
   */
  int horz_units;
  /**@}*/

  /*!
   * Parameters for each restoration unit in this plane
   */
  RestorationUnitInfo *unit_info;

  /*!
   * Restoration Stripe boundary info
   */
  RestorationStripeBoundaries boundaries;

  /*!
   * Whether optimized lr can be used for speed.
   * That includes cases of no cdef and no superres, or if fast trial runs
   * are used on the encoder side.
   */
  int optimized_lr;
} RestorationInfo;

/*!\cond */

static inline void set_default_sgrproj(SgrprojInfo *sgrproj_info) {
  sgrproj_info->xqd[0] = (SGRPROJ_PRJ_MIN0 + SGRPROJ_PRJ_MAX0) / 2;
  sgrproj_info->xqd[1] = (SGRPROJ_PRJ_MIN1 + SGRPROJ_PRJ_MAX1) / 2;
}

static inline void set_default_wiener(WienerInfo *wiener_info) {
  wiener_info->vfilter[0] = wiener_info->hfilter[0] = WIENER_FILT_TAP0_MIDV;
  wiener_info->vfilter[1] = wiener_info->hfilter[1] = WIENER_FILT_TAP1_MIDV;
  wiener_info->vfilter[2] = wiener_info->hfilter[2] = WIENER_FILT_TAP2_MIDV;
  wiener_info->vfilter[WIENER_HALFWIN] = wiener_info->hfilter[WIENER_HALFWIN] =
      -2 *
      (WIENER_FILT_TAP2_MIDV + WIENER_FILT_TAP1_MIDV + WIENER_FILT_TAP0_MIDV);
  wiener_info->vfilter[4] = wiener_info->hfilter[4] = WIENER_FILT_TAP2_MIDV;
  wiener_info->vfilter[5] = wiener_info->hfilter[5] = WIENER_FILT_TAP1_MIDV;
  wiener_info->vfilter[6] = wiener_info->hfilter[6] = WIENER_FILT_TAP0_MIDV;
}

typedef struct {
  int h_start, h_end, v_start, v_end;
} RestorationTileLimits;

typedef void (*rest_unit_visitor_t)(const RestorationTileLimits *limits,
                                    int rest_unit_idx, void *priv,
                                    int32_t *tmpbuf,
                                    RestorationLineBuffers *rlbs,
                                    struct aom_internal_error_info *error_info);

typedef struct FilterFrameCtxt {
  const RestorationInfo *rsi;
  int ss_x, ss_y;
  int plane_w, plane_h;
  int highbd, bit_depth;
  uint8_t *data8, *dst8;
  int data_stride, dst_stride;
} FilterFrameCtxt;

typedef struct AV1LrStruct {
  rest_unit_visitor_t on_rest_unit;
  FilterFrameCtxt ctxt[MAX_MB_PLANE];
  YV12_BUFFER_CONFIG *frame;
  YV12_BUFFER_CONFIG *dst;
} AV1LrStruct;

extern const sgr_params_type av1_sgr_params[SGRPROJ_PARAMS];
extern int sgrproj_mtable[SGRPROJ_PARAMS][2];
extern const int32_t av1_x_by_xplus1[256];
extern const int32_t av1_one_by_x[MAX_NELEM];

void av1_alloc_restoration_struct(struct AV1Common *cm, RestorationInfo *rsi,
                                  int is_uv);
void av1_free_restoration_struct(RestorationInfo *rst_info);

void av1_extend_frame(uint8_t *data, int width, int height, int stride,
                      int border_horz, int border_vert, int highbd);
void av1_decode_xq(const int *xqd, int *xq, const sgr_params_type *params);

/*!\endcond */

/*!\brief Function for applying loop restoration filter to a single unit.
 *
 * \ingroup in_loop_restoration
 * This function applies the loop restoration filter to a single
 * loop restoration unit.
 *
 * \param[in]       limits        Limits of the unit
 * \param[in]       rui           The parameters to use for this unit and its
 *                                coefficients
 * \param[in]       rsb           Deblocked pixels to use for stripe boundaries
 * \param[in]       rlbs          Space to use as a scratch buffer
 * \param[in]       ss_x          Horizontal subsampling for plane
 * \param[in]       ss_y          Vertical subsampling for plane
 * \param[in]       plane_w       Width of the current plane
 * \param[in]       plane_h       Height of the current plane
 * \param[in]       highbd        Whether high bitdepth pipeline is used
 * \param[in]       bit_depth     Bit-depth of the video
 * \param[in]       data8         Frame data (pointing at the top-left corner of
 *                                the frame, not the restoration unit).
 * \param[in]       stride        Stride of \c data8
 * \param[out]      dst8          Buffer where the results will be written. Like
 *                                \c data8, \c dst8 should point at the top-left
 *                                corner of the frame
 * \param[in]       dst_stride    Stride of \c dst8
 * \param[in]       tmpbuf        Scratch buffer used by the sgrproj filter
 *                                which should be at least SGRPROJ_TMPBUF_SIZE
 *                                big.
 * \param[in]       optimized_lr  Whether to use fast optimized Loop Restoration
 * \param[in,out]   error_info    Error info for reporting errors
 *
 * \remark Nothing is returned. Instead, the filtered unit is output in
 * \c dst8 at the proper restoration unit offset.
 */
void av1_loop_restoration_filter_unit(
    const RestorationTileLimits *limits, const RestorationUnitInfo *rui,
    const RestorationStripeBoundaries *rsb, RestorationLineBuffers *rlbs,
    int plane_w, int plane_h, int ss_x, int ss_y, int highbd, int bit_depth,
    uint8_t *data8, int stride, uint8_t *dst8, int dst_stride, int32_t *tmpbuf,
    int optimized_lr, struct aom_internal_error_info *error_info);

/*!\brief Function for applying loop restoration filter to a frame
 *
 * \ingroup in_loop_restoration
 * This function applies the loop restoration filter to a frame.
 *
 * \param[in,out]   frame         Compressed frame buffer
 * \param[in,out]   cm            Pointer to top level common structure
 * \param[in]       optimized_lr  Whether to use fast optimized Loop Restoration
 * \param[in]       lr_ctxt       Loop restoration context
 *
 * \remark Nothing is returned. Instead, the filtered frame is output in
 * \c frame.
 */
void av1_loop_restoration_filter_frame(YV12_BUFFER_CONFIG *frame,
                                       struct AV1Common *cm, int optimized_lr,
                                       void *lr_ctxt);
/*!\cond */

void av1_loop_restoration_precal(void);

struct AV1LrSyncData;

typedef void (*sync_read_fn_t)(void *const lr_sync, int r, int c, int plane);

typedef void (*sync_write_fn_t)(void *const lr_sync, int r, int c,
                                const int sb_cols, int plane);

// Return 1 iff the block at mi_row, mi_col with size bsize is a
// top-level superblock containing the top-left corner of at least one
// loop restoration unit.
//
// If the block is a top-level superblock, the function writes to
// *rcol0, *rcol1, *rrow0, *rrow1. This means that the parameters for all
// restoration units in the rectangle [*rcol0, *rcol1) x [*rrow0, *rrow1)
// are signaled in this superblock.
int av1_loop_restoration_corners_in_sb(const struct AV1Common *cm, int plane,
                                       int mi_row, int mi_col, BLOCK_SIZE bsize,
                                       int *rcol0, int *rcol1, int *rrow0,
                                       int *rrow1);

void av1_loop_restoration_save_boundary_lines(const YV12_BUFFER_CONFIG *frame,
                                              struct AV1Common *cm,
                                              int after_cdef);
void av1_loop_restoration_filter_frame_init(AV1LrStruct *lr_ctxt,
                                            YV12_BUFFER_CONFIG *frame,
                                            struct AV1Common *cm,
                                            int optimized_lr, int num_planes);
void av1_foreach_rest_unit_in_row(
    RestorationTileLimits *limits, int plane_w,
    rest_unit_visitor_t on_rest_unit, int row_number, int unit_size,
    int hnum_rest_units, int vnum_rest_units, int plane, void *priv,
    int32_t *tmpbuf, RestorationLineBuffers *rlbs, sync_read_fn_t on_sync_read,
    sync_write_fn_t on_sync_write, struct AV1LrSyncData *const lr_sync,
    struct aom_internal_error_info *error_info);

void av1_get_upsampled_plane_size(const struct AV1Common *cm, int is_uv,
                                  int *plane_w, int *plane_h);
int av1_lr_count_units(int unit_size, int plane_size);
void av1_lr_sync_read_dummy(void *const lr_sync, int r, int c, int plane);
void av1_lr_sync_write_dummy(void *const lr_sync, int r, int c,
                             const int sb_cols, int plane);

/*!\endcond */

#ifdef __cplusplus
}  // extern "C"
#endif

#endif  // AOM_AV1_COMMON_RESTORATION_H_