Remove unused members of VP8_COMP
Various members that were either completely unreferenced or written
and not read.
Change-Id: Ie41ebac0ff0364a76f287586e4fe09a68907806e
diff --git a/vp8/encoder/block.h b/vp8/encoder/block.h
index 3a4a302..fbdc89e 100644
--- a/vp8/encoder/block.h
+++ b/vp8/encoder/block.h
@@ -79,7 +79,6 @@
int errorperbit;
int sadperbit16;
int sadperbit4;
- int errthresh;
int rddiv;
int rdmult;
unsigned int * mb_activity_ptr;
diff --git a/vp8/encoder/encodeframe.c b/vp8/encoder/encodeframe.c
index 0f057d1..984776f 100644
--- a/vp8/encoder/encodeframe.c
+++ b/vp8/encoder/encodeframe.c
@@ -562,9 +562,6 @@
x->vector_range = 32;
- // Count of MBs using the alternate Q if any
- cpi->alt_qcount = 0;
-
// Reset frame count of inter 0,0 motion vector useage.
cpi->inter_zz_count = 0;
diff --git a/vp8/encoder/ethreading.c b/vp8/encoder/ethreading.c
index 281efa4..a03ff95 100644
--- a/vp8/encoder/ethreading.c
+++ b/vp8/encoder/ethreading.c
@@ -302,7 +302,6 @@
z->sadperbit16 = x->sadperbit16;
z->sadperbit4 = x->sadperbit4;
- z->errthresh = x->errthresh;
/*
z->mv_col_min = x->mv_col_min;
diff --git a/vp8/encoder/firstpass.c b/vp8/encoder/firstpass.c
index 7334a46..42239aa 100644
--- a/vp8/encoder/firstpass.c
+++ b/vp8/encoder/firstpass.c
@@ -1241,12 +1241,6 @@
reset_fpf_position(cpi, start_pos); // Reset file position
}
-
- // Calculate the clip target modified bits per error
- // The observed bpe starts as the same number.
- cpi->clip_bpe = cpi->bits_left /
- DOUBLE_DIVIDE_CHECK(cpi->modified_error_total);
- cpi->observed_bpe = cpi->clip_bpe;
}
void vp8_end_second_pass(VP8_COMP *cpi)
@@ -1978,13 +1972,6 @@
this_frame_intra_error = this_frame.intra_error;
this_frame_coded_error = this_frame.coded_error;
- // Store information regarding level of motion etc for use mode decisions.
- cpi->motion_speed = (int)(fabs(this_frame.MVr) + fabs(this_frame.MVc));
- cpi->motion_var = (int)(fabs(this_frame.MVrv) + fabs(this_frame.MVcv));
- cpi->inter_lvl = (int)(this_frame.pcnt_inter * 100);
- cpi->intra_lvl = (int)((1.0 - this_frame.pcnt_inter) * 100);
- cpi->motion_lvl = (int)(this_frame.pcnt_motion * 100);
-
start_pos = cpi->stats_in;
// keyframe and section processing !
@@ -2011,16 +1998,6 @@
// Is this a GF / ARF (Note that a KF is always also a GF)
if (cpi->frames_till_gf_update_due == 0)
{
- // Update monitor of the bits per error observed so far.
- // Done once per gf group based on what has gone before
- // so do nothing if this is the first frame.
- if (cpi->common.current_video_frame > 0)
- {
- cpi->observed_bpe =
- (double)(cpi->clip_bits_total - cpi->bits_left) /
- cpi->modified_error_used;
- }
-
// Define next gf group and assign bits to it
vpx_memcpy(&this_frame_copy, &this_frame, sizeof(this_frame));
define_gf_group(cpi, &this_frame_copy);
diff --git a/vp8/encoder/onyx_if.c b/vp8/encoder/onyx_if.c
index 20d5539..4533627 100644
--- a/vp8/encoder/onyx_if.c
+++ b/vp8/encoder/onyx_if.c
@@ -2093,8 +2093,6 @@
cpi->diamond_search_sad = SEARCH_INVOKE(&cpi->rtcd.search, diamond_search);
cpi->refining_search_sad = SEARCH_INVOKE(&cpi->rtcd.search, refining_search);
- cpi->ready_for_new_frame = 1;
-
// make sure frame 1 is okay
cpi->error_bins[0] = cpi->common.MBs;
@@ -4818,8 +4816,6 @@
}
- cpi->ready_for_new_frame = 1;
-
vpx_usec_timer_mark(&cmptimer);
cpi->time_compress_data += vpx_usec_timer_elapsed(&cmptimer);
diff --git a/vp8/encoder/onyx_int.h b/vp8/encoder/onyx_int.h
index e23e9d3..ec692a8 100644
--- a/vp8/encoder/onyx_int.h
+++ b/vp8/encoder/onyx_int.h
@@ -313,10 +313,6 @@
int rd_thresh_mult[MAX_MODES];
int rd_baseline_thresh[MAX_MODES];
int rd_threshes[MAX_MODES];
- int mvcostbase;
- int mvcostmultiplier;
- int subseqblockweight;
- int errthresh;
int RDMULT;
int RDDIV ;
@@ -329,16 +325,6 @@
long long intra_error;
long long last_intra_error;
-#if 0
- // Experimental RD code
- long long frame_distortion;
- long long last_frame_distortion;
-#endif
-
- int last_mb_distortion;
-
- int frames_since_auto_filter;
-
int this_frame_target;
int projected_frame_size;
int last_q[2]; // Separate values for Intra/Inter
@@ -384,7 +370,6 @@
int per_frame_bandwidth; // Current section per frame bandwidth target
int av_per_frame_bandwidth; // Average frame size target for clip
int min_frame_bandwidth; // Minimum allocation that should be used for any frame
- int last_key_frame_size;
int inter_frame_target;
double output_frame_rate;
long long last_time_stamp_seen;
@@ -443,11 +428,6 @@
vp8_prob frame_coef_probs [BLOCK_TYPES] [COEF_BANDS] [PREV_COEF_CONTEXTS] [vp8_coef_tokens-1];
unsigned int frame_branch_ct [BLOCK_TYPES] [COEF_BANDS] [PREV_COEF_CONTEXTS] [vp8_coef_tokens-1][2];
- /* Second compressed data partition contains coefficient data. */
-
- unsigned char *output_partition2;
- size_t output_partition2size;
-
int frames_to_key;
int gfu_boost;
int kf_boost;
@@ -456,15 +436,12 @@
double total_intra_error_left;
double total_coded_error_left;
double start_tot_err_left;
- double min_error;
double kf_intra_err_min;
double gf_intra_err_min;
double modified_error_total;
double modified_error_used;
double modified_error_left;
- double clip_bpe;
- double observed_bpe;
double avg_iiratio;
@@ -499,7 +476,6 @@
int goldfreq;
int auto_worst_q;
int cpu_used;
- int chroma_boost;
int horiz_scale;
int vert_scale;
int pass;
@@ -517,30 +493,13 @@
int this_frame_percent_intra;
int last_frame_percent_intra;
- int last_key_frame_q;
- int last_kffilt_lvl;
-
int ref_frame_flags;
SPEED_FEATURES sf;
int error_bins[1024];
- int inter_lvl;
- int intra_lvl;
- int motion_lvl;
- int motion_speed;
- int motion_var;
unsigned int next_iiratio;
unsigned int this_iiratio;
- int this_frame_modified_error;
-
- double norm_intra_err_per_mb;
- double norm_inter_err_per_mb;
- double norm_iidiff_per_mb;
-
- int last_best_mode_index; // Record of mode index chosen for previous macro block.
- int last_auto_filt_val;
- int last_auto_filt_q;
// Data used for real time conferencing mode to help determine if it would be good to update the gf
int inter_zz_count;
@@ -549,10 +508,6 @@
int skip_true_count;
int skip_false_count;
- int alt_qcount;
-
- int ready_for_new_frame;
-
unsigned char *segmentation_map;
signed char segment_feature_data[MB_LVL_MAX][MAX_MB_SEGMENTS]; // Segment data (can be deltas or absolute values)
int segment_encode_breakout[MAX_MB_SEGMENTS]; // segment threashold for encode breakout
@@ -602,9 +557,6 @@
unsigned int time_pick_lpf;
unsigned int time_encode_mb_row;
- unsigned int tempdata1;
- unsigned int tempdata2;
-
int base_skip_false_prob[128];
unsigned int section_intra_rating;
diff --git a/vp8/encoder/pickinter.c b/vp8/encoder/pickinter.c
index 1785edb..0262032 100644
--- a/vp8/encoder/pickinter.c
+++ b/vp8/encoder/pickinter.c
@@ -919,9 +919,6 @@
cpi->rd_threshes[best_mode_index] = (cpi->rd_baseline_thresh[best_mode_index] >> 7) * cpi->rd_thresh_mult[best_mode_index];
}
- // Keep a record of best mode index for use in next loop
- cpi->last_best_mode_index = best_mode_index;
-
if (best_mbmode.mode <= B_PRED)
{
x->e_mbd.mode_info_context->mbmi.ref_frame = INTRA_FRAME;
diff --git a/vp8/encoder/picklpf.c b/vp8/encoder/picklpf.c
index d294af6..b4c87a6 100644
--- a/vp8/encoder/picklpf.c
+++ b/vp8/encoder/picklpf.c
@@ -474,8 +474,4 @@
}
cm->filter_level = filt_best;
- cpi->last_auto_filt_val = filt_best;
- cpi->last_auto_filt_q = cm->base_qindex;
-
- cpi->frames_since_auto_filter = 0;
}
diff --git a/vp8/encoder/ratectrl.c b/vp8/encoder/ratectrl.c
index 313e645..1194373 100644
--- a/vp8/encoder/ratectrl.c
+++ b/vp8/encoder/ratectrl.c
@@ -1431,7 +1431,6 @@
}
cpi->frames_since_key = 0;
- cpi->last_key_frame_size = cpi->projected_frame_size;
cpi->key_frame_count++;
}
diff --git a/vp8/encoder/rdopt.c b/vp8/encoder/rdopt.c
index 5bd0c0a..a0e6318 100644
--- a/vp8/encoder/rdopt.c
+++ b/vp8/encoder/rdopt.c
@@ -2374,9 +2374,6 @@
}
- // Keep a record of best mode index that we chose
- cpi->last_best_mode_index = best_mode_index;
-
// Note how often each mode chosen as best
cpi->mode_chosen_counts[best_mode_index] ++;
