Remove two files not in use
test/cx_set_ref.sh: replaced by test/aomcx_set_ref.sh
test/vpxdec.sh: replaced by aomdec.sh
Change-Id: I74136d311eee7666e08ed8f573a17f810992fc52
diff --git a/test/cx_set_ref.sh b/test/cx_set_ref.sh
deleted file mode 100755
index dfba40d..0000000
--- a/test/cx_set_ref.sh
+++ /dev/null
@@ -1,61 +0,0 @@
-#!/bin/sh
-##
-## Copyright (c) 2016 The WebM project authors. All Rights Reserved.
-##
-## Use of this source code is governed by a BSD-style license
-## that can be found in the LICENSE file in the root of the source
-## tree. An additional intellectual property rights grant can be found
-## in the file PATENTS. All contributing project authors may
-## be found in the AUTHORS file in the root of the source tree.
-##
-## This file tests the libaom cx_set_ref example. To add new tests to this
-## file, do the following:
-## 1. Write a shell function (this is your test).
-## 2. Add the function to cx_set_ref_tests (on a new line).
-##
-. $(dirname $0)/tools_common.sh
-
-# Environment check: $YUV_RAW_INPUT is required.
-cx_set_ref_verify_environment() {
- if [ ! -e "${YUV_RAW_INPUT}" ]; then
- echo "Libaom test data must exist in LIBVPX_TEST_DATA_PATH."
- return 1
- fi
-}
-
-# Runs cx_set_ref and updates the reference frame before encoding frame 90.
-# $1 is the codec name.
-aom_set_ref() {
- local codec="$1"
- local encoder="${LIBAOM_BIN_PATH}/aom_cx_set_ref${AOM_TEST_EXE_SUFFIX}"
-
- local output_file="${AOM_TEST_OUTPUT_DIR}/${codec}cx_set_ref_${codec}.ivf"
- local ref_frame_num=90
-
- if [ ! -x "${encoder}" ]; then
- elog "${encoder} does not exist or is not executable."
- return 1
- fi
-
- if [ "$codec" = "vp8" ]; then
- eval "${AOM_TEST_PREFIX}" "${encoder}" "${YUV_RAW_INPUT_WIDTH}" \
- "${YUV_RAW_INPUT_HEIGHT}" "${YUV_RAW_INPUT}" "${output_file}" \
- "${ref_frame_num}" ${devnull}
- else
- eval "${AOM_TEST_PREFIX}" "${encoder}" "${codec}" "${YUV_RAW_INPUT_WIDTH}" \
- "${YUV_RAW_INPUT_HEIGHT}" "${YUV_RAW_INPUT}" "${output_file}" \
- "${ref_frame_num}" ${devnull}
- fi
-
- [ -e "${output_file}" ] || return 1
-}
-
-cx_set_ref_av1() {
- if [ "$(av1_encode_available)" = "yes" ]; then
- aom_set_ref av1 || return 1
- fi
-}
-
-cx_set_ref_tests="cx_set_ref_av1"
-
-run_tests cx_set_ref_verify_environment "${cx_set_ref_tests}"
diff --git a/test/vpxdec.sh b/test/vpxdec.sh
deleted file mode 100755
index 7c5169d..0000000
--- a/test/vpxdec.sh
+++ /dev/null
@@ -1,116 +0,0 @@
-#!/bin/sh
-##
-## Copyright (c) 2014 The WebM project authors. All Rights Reserved.
-##
-## Use of this source code is governed by a BSD-style license
-## that can be found in the LICENSE file in the root of the source
-## tree. An additional intellectual property rights grant can be found
-## in the file PATENTS. All contributing project authors may
-## be found in the AUTHORS file in the root of the source tree.
-##
-## This file tests aomdec. To add new tests to this file, do the following:
-## 1. Write a shell function (this is your test).
-## 2. Add the function to aomdec_tests (on a new line).
-##
-. $(dirname $0)/tools_common.sh
-
-# Environment check: Make sure input is available.
-aomdec_verify_environment() {
- if [ ! -e "${VP8_IVF_FILE}" ] || [ ! -e "${AV1_WEBM_FILE}" ] || \
- [ ! -e "${AV1_FPM_WEBM_FILE}" ] || \
- [ ! -e "${AV1_LT_50_FRAMES_WEBM_FILE}" ] ; then
- elog "Libaom test data must exist in LIBVPX_TEST_DATA_PATH."
- return 1
- fi
- if [ -z "$(aom_tool_path aomdec)" ]; then
- elog "aomdec not found. It must exist in LIBAOM_BIN_PATH or its parent."
- return 1
- fi
-}
-
-# Wrapper function for running aomdec with pipe input. Requires that
-# LIBAOM_BIN_PATH points to the directory containing aomdec. $1 is used as the
-# input file path and shifted away. All remaining parameters are passed through
-# to aomdec.
-aomdec_pipe() {
- local readonly decoder="$(aom_tool_path aomdec)"
- local readonly input="$1"
- shift
- cat "${input}" | eval "${AOM_TEST_PREFIX}" "${decoder}" - "$@" ${devnull}
-}
-
-# Wrapper function for running aomdec. Requires that LIBAOM_BIN_PATH points to
-# the directory containing aomdec. $1 one is used as the input file path and
-# shifted away. All remaining parameters are passed through to aomdec.
-aomdec() {
- local readonly decoder="$(aom_tool_path aomdec)"
- local readonly input="$1"
- shift
- eval "${AOM_TEST_PREFIX}" "${decoder}" "$input" "$@" ${devnull}
-}
-
-aomdec_can_decode_vp8() {
- if [ "$(vp8_decode_available)" = "yes" ]; then
- echo yes
- fi
-}
-
-aomdec_can_decode_vp9() {
- if [ "$(vp9_decode_available)" = "yes" ]; then
- echo yes
- fi
-}
-
-aomdec_vp8_ivf() {
- if [ "$(aomdec_can_decode_vp8)" = "yes" ]; then
- aomdec "${VP8_IVF_FILE}" --summary --noblit
- fi
-}
-
-aomdec_vp8_ivf_pipe_input() {
- if [ "$(aomdec_can_decode_vp8)" = "yes" ]; then
- aomdec_pipe "${VP8_IVF_FILE}" --summary --noblit
- fi
-}
-
-aomdec_vp9_webm() {
- if [ "$(aomdec_can_decode_vp9)" = "yes" ] && \
- [ "$(webm_io_available)" = "yes" ]; then
- aomdec "${AV1_WEBM_FILE}" --summary --noblit
- fi
-}
-
-aomdec_vp9_webm_frame_parallel() {
- if [ "$(aomdec_can_decode_vp9)" = "yes" ] && \
- [ "$(webm_io_available)" = "yes" ]; then
- for threads in 2 3 4 5 6 7 8; do
- aomdec "${AV1_FPM_WEBM_FILE}" --summary --noblit --threads=$threads \
- --frame-parallel
- done
- fi
-}
-
-aomdec_vp9_webm_less_than_50_frames() {
- # ensure that reaching eof in webm_guess_framerate doesn't result in invalid
- # frames in actual webm_read_frame calls.
- if [ "$(aomdec_can_decode_vp9)" = "yes" ] && \
- [ "$(webm_io_available)" = "yes" ]; then
- local readonly decoder="$(aom_tool_path aomdec)"
- local readonly expected=10
- local readonly num_frames=$(${AOM_TEST_PREFIX} "${decoder}" \
- "${AV1_LT_50_FRAMES_WEBM_FILE}" --summary --noblit 2>&1 \
- | awk '/^[0-9]+ decoded frames/ { print $1 }')
- if [ "$num_frames" -ne "$expected" ]; then
- elog "Output frames ($num_frames) != expected ($expected)"
- return 1
- fi
- fi
-}
-
-aomdec_tests="aomdec_vp8_ivf
- aomdec_vp8_ivf_pipe_input
- aomdec_vp9_webm
- aomdec_vp9_webm_frame_parallel
- aomdec_vp9_webm_less_than_50_frames"
-
-run_tests aomdec_verify_environment "${aomdec_tests}"
