@TEMPLATE decoder_tmpl.c
Decode With Partial Drops Example
=========================
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ INTRODUCTION
This is an example utility which drops a series of frames (or parts of frames),
as specified on the command line. This is useful for observing the error
recovery features of the codec.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ INTRODUCTION

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EXTRA_INCLUDES
#include <time.h>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EXTRA_INCLUDES

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ HELPERS
struct parsed_header
{
    char key_frame;
    int version;
    char show_frame;
    int first_part_size;
};

int next_packet(struct parsed_header* hdr, int pos, int length, int mtu)
{
    int size = 0;
    int remaining = length - pos;
    /* Uncompressed part is 3 bytes for P frames and 10 bytes for I frames */
    int uncomp_part_size = (hdr->key_frame ? 10 : 3);
    /* number of bytes yet to send from header and the first partition */
    int remainFirst = uncomp_part_size + hdr->first_part_size - pos;
    if (remainFirst > 0)
    {
        if (remainFirst <= mtu)
        {
            size = remainFirst;
        }
        else
        {
            size = mtu;
        }

        return size;
    }

    /* second partition; just slot it up according to MTU */
    if (remaining <= mtu)
    {
        size = remaining;
        return size;
    }
    return mtu;
}

void throw_packets(unsigned char* frame, int* size, int loss_rate,
                   int* thrown, int* kept)
{
    unsigned char loss_frame[256*1024];
    int pkg_size = 1;
    int pos = 0;
    int loss_pos = 0;
    struct parsed_header hdr;
    unsigned int tmp;
    int mtu = 1500;

    if (*size < 3)
    {
        return;
    }
    putc('|', stdout);
    /* parse uncompressed 3 bytes */
    tmp = (frame[2] << 16) | (frame[1] << 8) | frame[0];
    hdr.key_frame = !(tmp & 0x1); /* inverse logic */
    hdr.version = (tmp >> 1) & 0x7;
    hdr.show_frame = (tmp >> 4) & 0x1;
    hdr.first_part_size = (tmp >> 5) & 0x7FFFF;

    /* don't drop key frames */
    if (hdr.key_frame)
    {
        int i;
        *kept = *size/mtu + ((*size % mtu > 0) ? 1 : 0); /* approximate */
        for (i=0; i < *kept; i++)
            putc('.', stdout);
        return;
    }

    while ((pkg_size = next_packet(&hdr, pos, *size, mtu)) > 0)
    {
        int loss_event = ((rand() + 1.0)/(RAND_MAX + 1.0) < loss_rate/100.0);
        if (*thrown == 0 && !loss_event)
        {
            memcpy(loss_frame + loss_pos, frame + pos, pkg_size);
            loss_pos += pkg_size;
            (*kept)++;
            putc('.', stdout);
        }
        else
        {
            (*thrown)++;
            putc('X', stdout);
        }
        pos += pkg_size;
    }
    memcpy(frame, loss_frame, loss_pos);
    memset(frame + loss_pos, 0, *size - loss_pos);
    *size = loss_pos;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ HELPERS

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DEC_INIT
/* Initialize codec */
flags = VPX_CODEC_USE_ERROR_CONCEALMENT;
res = vpx_codec_dec_init(&codec, interface, NULL, flags);
if(res)
    die_codec(&codec, "Failed to initialize decoder");

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DEC_INIT

Usage
-----
This example adds a single argument to the `simple_decoder` example,
which specifies the range or pattern of frames to drop. The parameter is
parsed as follows:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ USAGE
if(argc!=4 && argc != 5)
    die("Usage: %s <infile> <outfile> <N-M|N/M|L,S>\n", argv[0]);
{
    char *nptr;
    n = strtol(argv[3], &nptr, 0);
    mode = (*nptr == '\0' || *nptr == ',') ? 2 : (*nptr == '-') ? 1 : 0;

    m = strtol(nptr+1, NULL, 0);
    if((!n && !m) || (*nptr != '-' && *nptr != '/' &&
        *nptr != '\0' && *nptr != ','))
        die("Couldn't parse pattern %s\n", argv[3]);
}
seed = (m > 0) ? m : (unsigned int)time(NULL);
srand(seed);thrown_frame = 0;
printf("Seed: %u\n", seed);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ USAGE


Dropping A Range Of Frames
--------------------------
To drop a range of frames, specify the starting frame and the ending
frame to drop, separated by a dash. The following command will drop
frames 5 through 10 (base 1).

  $ ./decode_with_partial_drops in.ivf out.i420 5-10


Dropping A Pattern Of Frames
----------------------------
To drop a pattern of frames, specify the number of frames to drop and
the number of frames after which to repeat the pattern, separated by
a forward-slash. The following command will drop 3 of 7 frames.
Specifically, it will decode 4 frames, then drop 3 frames, and then
repeat.

  $ ./decode_with_partial_drops in.ivf out.i420 3/7

Dropping Random Parts Of Frames
-------------------------------
A third argument tuple is available to split the frame into 1500 bytes pieces
and randomly drop pieces rather than frames. The frame will be split at
partition boundaries where possible. The following example will seed the RNG
with the seed 123 and drop approximately 5% of the pieces. Pieces which
are depending on an already dropped piece will also be dropped.

  $ ./decode_with_partial_drops in.ivf out.i420 5,123


Extra Variables
---------------
This example maintains the pattern passed on the command line in the
`n`, `m`, and `is_range` variables:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EXTRA_VARS
int              n, m, mode;
unsigned int     seed;
int              thrown=0, kept=0;
int              thrown_frame=0, kept_frame=0;
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EXTRA_VARS


Making The Drop Decision
------------------------
The example decides whether to drop the frame based on the current
frame number, immediately before decoding the frame.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ PRE_DECODE
/* Decide whether to throw parts of the frame or the whole frame
   depending on the drop mode */
thrown_frame = 0;
kept_frame = 0;
switch (mode)
{
case 0:
    if (m - (frame_cnt-1)%m <= n)
    {
        frame_sz = 0;
    }
    break;
case 1:
    if (frame_cnt >= n && frame_cnt <= m)
    {
        frame_sz = 0;
    }
    break;
case 2:
    throw_packets(frame, &frame_sz, n, &thrown_frame, &kept_frame);
    break;
default: break;
}
if (mode < 2)
{
    if (frame_sz == 0)
    {
        putc('X', stdout);
        thrown_frame++;
    }
    else
    {
        putc('.', stdout);
        kept_frame++;
    }
}
thrown += thrown_frame;
kept += kept_frame;
fflush(stdout);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ PRE_DECODE