Remove "Supported codecs:" lines from aomcx.h
There is currently only one codec supported by this library.
BUG=aomedia:5
Change-Id: Ic83f09b8ca783fcdf0117d338858f3fcee55e038
diff --git a/aom/aomcx.h b/aom/aomcx.h
index 25fff78..f100dfa 100644
--- a/aom/aomcx.h
+++ b/aom/aomcx.h
@@ -116,26 +116,18 @@
*/
enum aome_enc_control_id {
/*!\brief Codec control function to set which reference frame encoder can use.
- *
- * Supported in codecs: VP8, AV1
*/
AOME_USE_REFERENCE = 7,
/*!\brief Codec control function to pass an ROI map to encoder.
- *
- * Supported in codecs: VP8, AV1
*/
AOME_SET_ROI_MAP = 8,
/*!\brief Codec control function to pass an Active map to encoder.
- *
- * Supported in codecs: VP8, AV1
*/
AOME_SET_ACTIVEMAP,
/*!\brief Codec control function to set encoder scaling mode.
- *
- * Supported in codecs: VP8, AV1
*/
AOME_SET_SCALEMODE = 11,
@@ -145,45 +137,32 @@
* of motion estimation methods. Values greater than 0 will increase encoder
* speed at the expense of quality.
*
- * \note Valid range for VP8: -16..16
- * \note Valid range for AV1: -8..8
- *
- * Supported in codecs: VP8, AV1
+ * \note Valid range: -8..8
*/
AOME_SET_CPUUSED = 13,
/*!\brief Codec control function to enable automatic set and use alf frames.
- *
- * Supported in codecs: VP8, AV1
*/
AOME_SET_ENABLEAUTOALTREF,
#if CONFIG_EXT_REFS
/*!\brief Codec control function to enable automatic set and use
* bwd-pred frames.
- *
- * Supported in codecs: AV1
*/
AOME_SET_ENABLEAUTOBWDREF,
#endif // CONFIG_EXT_REFS
/*!\brief Codec control function to set sharpness.
- *
- * Supported in codecs: VP8, AV1
*/
AOME_SET_SHARPNESS = AOME_SET_ENABLEAUTOALTREF + 2,
/*!\brief Codec control function to set the threshold for MBs treated static.
- *
- * Supported in codecs: VP8, AV1
*/
AOME_SET_STATIC_THRESHOLD,
/*!\brief Codec control function to get last quantizer chosen by the encoder.
*
* Return value uses internal quantizer scale defined by the codec.
- *
- * Supported in codecs: VP8, AV1
*/
AOME_GET_LAST_QUANTIZER = AOME_SET_STATIC_THRESHOLD + 2,
@@ -191,20 +170,14 @@
*
* Return value uses the 0..63 scale as used by the rc_*_quantizer config
* parameters.
- *
- * Supported in codecs: VP8, AV1
*/
AOME_GET_LAST_QUANTIZER_64,
/*!\brief Codec control function to set the max no of frames to create arf.
- *
- * Supported in codecs: VP8, AV1
*/
AOME_SET_ARNR_MAXFRAMES,
/*!\brief Codec control function to set the filter strength for the arf.
- *
- * Supported in codecs: VP8, AV1
*/
AOME_SET_ARNR_STRENGTH,
@@ -212,8 +185,6 @@
AOME_SET_ARNR_TYPE,
/*!\brief Codec control function to set visual tuning.
- *
- * Supported in codecs: VP8, AV1
*/
AOME_SET_TUNING,
@@ -222,8 +193,6 @@
* \attention For this value to be used aom_codec_enc_cfg_t::g_usage must be
* set to #AOM_CQ.
* \note Valid range: 0..63
- *
- * Supported in codecs: VP8, AV1
*/
AOME_SET_CQ_LEVEL,
@@ -237,8 +206,6 @@
*
* For example, to allocate no more than 4.5 frames worth of bitrate
* to a keyframe, set this to 450.
- *
- * Supported in codecs: VP8, AV1
*/
AOME_SET_MAX_INTRA_BITRATE_PCT,
@@ -252,8 +219,6 @@
*
* For example, to allow no more than 4.5 frames worth of bitrate
* to an inter frame, set this to 450.
- *
- * Supported in codecs: AV1
*/
AV1E_SET_MAX_INTER_BITRATE_PCT = AOME_SET_MAX_INTRA_BITRATE_PCT + 2,
@@ -267,8 +232,6 @@
*
* For example, to allow 100% more bits, i.e, 2X, in a golden frame
* than average frame, set this to 100.
- *
- * Supported in codecs: AV1
*/
AV1E_SET_GF_CBR_BOOST_PCT,
@@ -282,8 +245,6 @@
* 1 = lossless coding mode
*
* By default, encoder operates in normal coding mode (maybe lossy).
- *
- * Supported in codecs: AV1
*/
AV1E_SET_LOSSLESS = AV1E_SET_GF_CBR_BOOST_PCT + 2,
#if CONFIG_AOM_QM
@@ -295,8 +256,6 @@
* 1 = use quantisation matrices
*
* By default, the encoder operates without quantisation matrices.
- *
- * Supported in codecs: AOM
*/
AV1E_SET_ENABLE_QM,
@@ -310,8 +269,6 @@
*
* By default, the encoder sets this minimum at half the available
* range.
- *
- * Supported in codecs: AOM
*/
AV1E_SET_QM_MIN,
@@ -323,8 +280,6 @@
*
* By default, the encoder sets this maximum at the top of the
* available range.
- *
- * Supported in codecs: AOM
*/
AV1E_SET_QM_MAX,
#endif
@@ -334,8 +289,6 @@
*
* This will set the maximum number of tile groups. This will be
* overridden if an MTU size is set. The default value is 1.
- *
- * Supported in codecs: AV1
*/
AV1E_SET_NUM_TG,
@@ -346,8 +299,6 @@
*
* By default, the value is 0, in which case a fixed number of tile groups
* is used.
- *
- * Supported in codecs: AV1
*/
AV1E_SET_MTU,
#endif
@@ -370,8 +321,6 @@
* is 4096).
*
* By default, the value is 0, i.e. one single column tile for entire image.
- *
- * Supported in codecs: AV1
*/
AV1E_SET_TILE_COLUMNS,
@@ -390,8 +339,6 @@
* 2 = 4 tile rows
*
* By default, the value is 0, i.e. one single row tile for entire image.
- *
- * Supported in codecs: AV1
*/
AV1E_SET_TILE_ROWS,
@@ -404,8 +351,6 @@
* turn this feature on or off for bitstreams produced by encoder.
*
* By default, this feature is off.
- *
- * Supported in codecs: AV1
*/
AV1E_SET_FRAME_PARALLEL_DECODING,
@@ -417,8 +362,6 @@
* several AQ_modes supported.
*
* By default, encoder operates with AQ_Mode 0(adaptive quantization off).
- *
- * Supported in codecs: AV1
*/
AV1E_SET_AQ_MODE,
@@ -432,16 +375,12 @@
*
* By default, the encoder is allowed to use this feature for appropriate
* encoding modes.
- *
- * Supported in codecs: AV1
*/
AV1E_SET_FRAME_PERIODIC_BOOST,
/*!\brief Codec control function to set noise sensitivity.
*
* 0: off, 1: On(YOnly)
- *
- * Supported in codecs: AV1
*/
AV1E_SET_NOISE_SENSITIVITY,
@@ -449,8 +388,6 @@
* \note Valid parameter range:
* AOM_CONTENT_DEFAULT = Regular video content (Default)
* AOM_CONTENT_SCREEN = Screen capture content
- *
- * Supported in codecs: AV1
*/
AV1E_SET_TUNE_CONTENT,
@@ -464,30 +401,22 @@
* 5 = BT_2020
* 6 = RESERVED
* 7 = SRGB
- *
- * Supported in codecs: AV1
*/
AV1E_SET_COLOR_SPACE,
/*!\brief Codec control function to set minimum interval between GF/ARF frames
*
* By default the value is set as 4.
- *
- * Supported in codecs: AV1
*/
AV1E_SET_MIN_GF_INTERVAL,
/*!\brief Codec control function to set minimum interval between GF/ARF frames
*
* By default the value is set as 16.
- *
- * Supported in codecs: AV1
*/
AV1E_SET_MAX_GF_INTERVAL,
/*!\brief Codec control function to get an Active map back from the encoder.
- *
- * Supported in codecs: AV1
*/
AV1E_GET_ACTIVEMAP,
@@ -495,16 +424,12 @@
* \note Valid ranges: 0..1, default is 0
* 0 = Limited range (16..235 or HBD equivalent)
* 1 = Full range (0..255 or HBD equivalent)
- *
- * Supported in codecs: AV1
*/
AV1E_SET_COLOR_RANGE,
/*!\brief Codec control function to set intended rendering image size.
*
* By default, this is identical to the image size in pixels.
- *
- * Supported in codecs: AV1
*/
AV1E_SET_RENDER_SIZE,
@@ -512,14 +437,10 @@
*
* 255: off (default); 0: only keep level stats; 10: target for level 1.0;
* 11: target for level 1.1; ... 62: target for level 6.2
- *
- * Supported in codecs: AV1
*/
AV1E_SET_TARGET_LEVEL,
/*!\brief Codec control function to get bitstream level.
- *
- * Supported in codecs: AV1
*/
AV1E_GET_LEVEL,
@@ -527,8 +448,6 @@
*
* By default, the superblock size is determined separately for each
* frame by the encoder.
- *
- * Supported in codecs: AV1
*/
AV1E_SET_SUPERBLOCK_SIZE,
};
