diff --git a/test/datarate_test.cc b/test/datarate_test.cc
index 13f12e2..89761e7 100644
--- a/test/datarate_test.cc
+++ b/test/datarate_test.cc
@@ -19,198 +19,13 @@
 namespace {
 
 class DatarateTestLarge : public ::libvpx_test::EncoderTest,
-    public ::libvpx_test::CodecTestWithParam<libvpx_test::TestMode> {
+    public ::libvpx_test::CodecTestWith2Params<libvpx_test::TestMode, int> {
  public:
   DatarateTestLarge() : EncoderTest(GET_PARAM(0)) {}
 
+ protected:
   virtual ~DatarateTestLarge() {}
 
- protected:
-  virtual void SetUp() {
-    InitializeConfig();
-    SetMode(GET_PARAM(1));
-    ResetModel();
-  }
-
-  virtual void ResetModel() {
-    last_pts_ = 0;
-    bits_in_buffer_model_ = cfg_.rc_target_bitrate * cfg_.rc_buf_initial_sz;
-    frame_number_ = 0;
-    first_drop_ = 0;
-    bits_total_ = 0;
-    duration_ = 0.0;
-    denoiser_offon_test_ = 0;
-    denoiser_offon_period_ = -1;
-  }
-
-  virtual void PreEncodeFrameHook(::libvpx_test::VideoSource *video,
-                                  ::libvpx_test::Encoder *encoder) {
-    if (video->frame() == 0)
-      encoder->Control(VP8E_SET_NOISE_SENSITIVITY, denoiser_on_);
-
-    if (denoiser_offon_test_) {
-      ASSERT_GT(denoiser_offon_period_, 0)
-          << "denoiser_offon_period_ is not positive.";
-      if ((video->frame() + 1) % denoiser_offon_period_ == 0) {
-        // Flip denoiser_on_ periodically
-        denoiser_on_ ^= 1;
-      }
-      encoder->Control(VP8E_SET_NOISE_SENSITIVITY, denoiser_on_);
-    }
-
-    const vpx_rational_t tb = video->timebase();
-    timebase_ = static_cast<double>(tb.num) / tb.den;
-    duration_ = 0;
-  }
-
-  virtual void FramePktHook(const vpx_codec_cx_pkt_t *pkt) {
-    // Time since last timestamp = duration.
-    vpx_codec_pts_t duration = pkt->data.frame.pts - last_pts_;
-
-    // TODO(jimbankoski): Remove these lines when the issue:
-    // http://code.google.com/p/webm/issues/detail?id=496 is fixed.
-    // For now the codec assumes buffer starts at starting buffer rate
-    // plus one frame's time.
-    if (last_pts_ == 0)
-      duration = 1;
-
-    // Add to the buffer the bits we'd expect from a constant bitrate server.
-    bits_in_buffer_model_ += static_cast<int64_t>(
-        duration * timebase_ * cfg_.rc_target_bitrate * 1000);
-
-    /* Test the buffer model here before subtracting the frame. Do so because
-     * the way the leaky bucket model works in libvpx is to allow the buffer to
-     * empty - and then stop showing frames until we've got enough bits to
-     * show one. As noted in comment below (issue 495), this does not currently
-     * apply to key frames. For now exclude key frames in condition below. */
-    const bool key_frame = (pkt->data.frame.flags & VPX_FRAME_IS_KEY)
-                         ? true: false;
-    if (!key_frame) {
-      ASSERT_GE(bits_in_buffer_model_, 0) << "Buffer Underrun at frame "
-          << pkt->data.frame.pts;
-    }
-
-    const int64_t frame_size_in_bits = pkt->data.frame.sz * 8;
-
-    // Subtract from the buffer the bits associated with a played back frame.
-    bits_in_buffer_model_ -= frame_size_in_bits;
-
-    // Update the running total of bits for end of test datarate checks.
-    bits_total_ += frame_size_in_bits;
-
-    // If first drop not set and we have a drop set it to this time.
-    if (!first_drop_ && duration > 1)
-      first_drop_ = last_pts_ + 1;
-
-    // Update the most recent pts.
-    last_pts_ = pkt->data.frame.pts;
-
-    // We update this so that we can calculate the datarate minus the last
-    // frame encoded in the file.
-    bits_in_last_frame_ = frame_size_in_bits;
-
-    ++frame_number_;
-  }
-
-  virtual void EndPassHook(void) {
-    if (bits_total_) {
-      const double file_size_in_kb = bits_total_ / 1000.;  // bits per kilobit
-
-      duration_ = (last_pts_ + 1) * timebase_;
-
-      // Effective file datarate includes the time spent prebuffering.
-      effective_datarate_ = (bits_total_ - bits_in_last_frame_) / 1000.0
-          / (cfg_.rc_buf_initial_sz / 1000.0 + duration_);
-
-      file_datarate_ = file_size_in_kb / duration_;
-    }
-  }
-
-  vpx_codec_pts_t last_pts_;
-  int64_t bits_in_buffer_model_;
-  double timebase_;
-  int frame_number_;
-  vpx_codec_pts_t first_drop_;
-  int64_t bits_total_;
-  double duration_;
-  double file_datarate_;
-  double effective_datarate_;
-  int64_t bits_in_last_frame_;
-  int denoiser_on_;
-  int denoiser_offon_test_;
-  int denoiser_offon_period_;
-};
-
-
-TEST_P(DatarateTestLarge, BasicBufferModel) {
-  denoiser_on_ = 0;
-  cfg_.rc_buf_initial_sz = 500;
-  cfg_.rc_dropframe_thresh = 1;
-  cfg_.rc_max_quantizer = 56;
-  cfg_.rc_end_usage = VPX_CBR;
-  // 2 pass cbr datarate control has a bug hidden by the small # of
-  // frames selected in this encode. The problem is that even if the buffer is
-  // negative we produce a keyframe on a cutscene. Ignoring datarate
-  // constraints
-  // TODO(jimbankoski): ( Fix when issue
-  // http://code.google.com/p/webm/issues/detail?id=495 is addressed. )
-  ::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
-                                       30, 1, 0, 140);
-
-  // There is an issue for low bitrates in real-time mode, where the
-  // effective_datarate slightly overshoots the target bitrate.
-  // This is same the issue as noted about (#495).
-  // TODO(jimbankoski/marpan): Update test to run for lower bitrates (< 100),
-  // when the issue is resolved.
-  for (int i = 100; i < 800; i += 200) {
-    cfg_.rc_target_bitrate = i;
-    ResetModel();
-    ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
-    ASSERT_GE(cfg_.rc_target_bitrate, effective_datarate_ * 0.95)
-        << " The datarate for the file exceeds the target!";
-
-    ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.3)
-        << " The datarate for the file missed the target!";
-  }
-}
-
-TEST_P(DatarateTestLarge, ChangingDropFrameThresh) {
-  denoiser_on_ = 0;
-  cfg_.rc_buf_initial_sz = 500;
-  cfg_.rc_max_quantizer = 36;
-  cfg_.rc_end_usage = VPX_CBR;
-  cfg_.rc_target_bitrate = 200;
-  cfg_.kf_mode = VPX_KF_DISABLED;
-
-  const int frame_count = 40;
-  ::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
-                                       30, 1, 0, frame_count);
-
-  // Here we check that the first dropped frame gets earlier and earlier
-  // as the drop frame threshold is increased.
-
-  const int kDropFrameThreshTestStep = 30;
-  vpx_codec_pts_t last_drop = frame_count;
-  for (int i = 1; i < 91; i += kDropFrameThreshTestStep) {
-    cfg_.rc_dropframe_thresh = i;
-    ResetModel();
-    ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
-    ASSERT_LE(first_drop_, last_drop)
-        << " The first dropped frame for drop_thresh " << i
-        << " > first dropped frame for drop_thresh "
-        << i - kDropFrameThreshTestStep;
-    last_drop = first_drop_;
-  }
-}
-
-class DatarateTestVP9Large : public ::libvpx_test::EncoderTest,
-    public ::libvpx_test::CodecTestWith2Params<libvpx_test::TestMode, int> {
- public:
-  DatarateTestVP9Large() : EncoderTest(GET_PARAM(0)) {}
-
- protected:
-  virtual ~DatarateTestVP9Large() {}
-
   virtual void SetUp() {
     InitializeConfig();
     SetMode(GET_PARAM(1));
@@ -227,77 +42,11 @@
     num_drops_ = 0;
     // Denoiser is off by default.
     denoiser_on_ = 0;
-    // For testing up to 3 layers.
-    for (int i = 0; i < 3; ++i) {
-      bits_total_[i] = 0;
-    }
+    bits_total_ = 0;
     denoiser_offon_test_ = 0;
     denoiser_offon_period_ = -1;
   }
 
-  //
-  // Frame flags and layer id for temporal layers.
-  //
-
-  // For two layers, test pattern is:
-  //   1     3
-  // 0    2     .....
-  // For three layers, test pattern is:
-  //   1      3    5      7
-  //      2           6
-  // 0          4            ....
-  // LAST is always update on base/layer 0, GOLDEN is updated on layer 1.
-  // For this 3 layer example, the 2nd enhancement layer (layer 2) does not
-  // update any reference frames.
-  int SetFrameFlags(int frame_num, int num_temp_layers) {
-    int frame_flags = 0;
-    if (num_temp_layers == 2) {
-      if (frame_num % 2 == 0) {
-        // Layer 0: predict from L and ARF, update L.
-        frame_flags = VP8_EFLAG_NO_REF_GF | VP8_EFLAG_NO_UPD_GF |
-                      VP8_EFLAG_NO_UPD_ARF;
-      } else {
-        // Layer 1: predict from L, G and ARF, and update G.
-        frame_flags = VP8_EFLAG_NO_UPD_ARF | VP8_EFLAG_NO_UPD_LAST |
-                      VP8_EFLAG_NO_UPD_ENTROPY;
-      }
-    } else if (num_temp_layers == 3) {
-      if (frame_num % 4 == 0) {
-        // Layer 0: predict from L and ARF; update L.
-        frame_flags = VP8_EFLAG_NO_UPD_GF | VP8_EFLAG_NO_UPD_ARF |
-                      VP8_EFLAG_NO_REF_GF;
-      } else if ((frame_num - 2) % 4 == 0) {
-        // Layer 1: predict from L, G, ARF; update G.
-        frame_flags = VP8_EFLAG_NO_UPD_ARF | VP8_EFLAG_NO_UPD_LAST;
-      }  else if ((frame_num - 1) % 2 == 0) {
-        // Layer 2: predict from L, G, ARF; update none.
-        frame_flags = VP8_EFLAG_NO_UPD_GF | VP8_EFLAG_NO_UPD_ARF |
-                      VP8_EFLAG_NO_UPD_LAST;
-      }
-    }
-    return frame_flags;
-  }
-
-  int SetLayerId(int frame_num, int num_temp_layers) {
-    int layer_id = 0;
-    if (num_temp_layers == 2) {
-      if (frame_num % 2 == 0) {
-        layer_id = 0;
-      } else {
-        layer_id = 1;
-      }
-    } else if (num_temp_layers == 3) {
-      if (frame_num % 4 == 0) {
-        layer_id = 0;
-      } else if ((frame_num - 2) % 4 == 0) {
-        layer_id = 1;
-      } else if ((frame_num - 1) % 2 == 0) {
-        layer_id = 2;
-      }
-    }
-    return layer_id;
-  }
-
   virtual void PreEncodeFrameHook(::libvpx_test::VideoSource *video,
                                   ::libvpx_test::Encoder *encoder) {
     if (video->frame() == 0)
@@ -314,23 +63,11 @@
 
     encoder->Control(VP9E_SET_NOISE_SENSITIVITY, denoiser_on_);
 
-    if (cfg_.ts_number_layers > 1) {
-      if (video->frame() == 0) {
-        encoder->Control(VP9E_SET_SVC, 1);
-      }
-      vpx_svc_layer_id_t layer_id;
-      layer_id.spatial_layer_id = 0;
-      frame_flags_ = SetFrameFlags(video->frame(), cfg_.ts_number_layers);
-      layer_id.temporal_layer_id = SetLayerId(video->frame(),
-                                              cfg_.ts_number_layers);
-      encoder->Control(VP9E_SET_SVC_LAYER_ID, &layer_id);
-    }
     const vpx_rational_t tb = video->timebase();
     timebase_ = static_cast<double>(tb.num) / tb.den;
     duration_ = 0;
   }
 
-
   virtual void FramePktHook(const vpx_codec_cx_pkt_t *pkt) {
     // Time since last timestamp = duration.
     vpx_codec_pts_t duration = pkt->data.frame.pts - last_pts_;
@@ -346,8 +83,6 @@
       tot_frame_number_ += static_cast<int>(duration - 1);
     }
 
-    int layer = SetLayerId(tot_frame_number_, cfg_.ts_number_layers);
-
     // Add to the buffer the bits we'd expect from a constant bitrate server.
     bits_in_buffer_model_ += static_cast<int64_t>(
         duration * timebase_ * cfg_.rc_target_bitrate * 1000);
@@ -358,11 +93,8 @@
 
     const size_t frame_size_in_bits = pkt->data.frame.sz * 8;
 
-    // Update the total encoded bits. For temporal layers, update the cumulative
-    // encoded bits per layer.
-    for (int i = layer; i < static_cast<int>(cfg_.ts_number_layers); ++i) {
-      bits_total_[i] += frame_size_in_bits;
-    }
+    // Update the total encoded bits.
+    bits_total_ += frame_size_in_bits;
 
     // Update the most recent pts.
     last_pts_ = pkt->data.frame.pts;
@@ -371,23 +103,18 @@
   }
 
   virtual void EndPassHook(void) {
-    for (int layer = 0; layer < static_cast<int>(cfg_.ts_number_layers);
-        ++layer) {
-      duration_ = (last_pts_ + 1) * timebase_;
-      if (bits_total_[layer]) {
-        // Effective file datarate:
-        effective_datarate_[layer] = (bits_total_[layer] / 1000.0) / duration_;
-      }
-    }
+    duration_ = (last_pts_ + 1) * timebase_;
+    // Effective file datarate:
+    effective_datarate_ = (bits_total_ / 1000.0) / duration_;
   }
 
   vpx_codec_pts_t last_pts_;
   double timebase_;
   int frame_number_;      // Counter for number of non-dropped/encoded frames.
   int tot_frame_number_;  // Counter for total number of input frames.
-  int64_t bits_total_[3];
+  int64_t bits_total_;
   double duration_;
-  double effective_datarate_[3];
+  double effective_datarate_;
   int set_cpu_used_;
   int64_t bits_in_buffer_model_;
   vpx_codec_pts_t first_drop_;
@@ -398,7 +125,7 @@
 };
 
 // Check basic rate targeting for VBR mode.
-TEST_P(DatarateTestVP9Large, BasicRateTargetingVBR) {
+TEST_P(DatarateTestLarge, BasicRateTargetingVBR) {
   cfg_.rc_min_quantizer = 0;
   cfg_.rc_max_quantizer = 63;
   cfg_.g_error_resilient = 0;
@@ -411,15 +138,15 @@
     cfg_.rc_target_bitrate = i;
     ResetModel();
     ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
-    ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.75)
+    ASSERT_GE(effective_datarate_, cfg_.rc_target_bitrate * 0.75)
         << " The datarate for the file is lower than target by too much!";
-    ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.25)
+    ASSERT_LE(effective_datarate_, cfg_.rc_target_bitrate * 1.25)
         << " The datarate for the file is greater than target by too much!";
   }
 }
 
 // Check basic rate targeting for CBR,
-TEST_P(DatarateTestVP9Large, BasicRateTargeting) {
+TEST_P(DatarateTestLarge, BasicRateTargeting) {
   cfg_.rc_buf_initial_sz = 500;
   cfg_.rc_buf_optimal_sz = 500;
   cfg_.rc_buf_sz = 1000;
@@ -435,15 +162,15 @@
     cfg_.rc_target_bitrate = i;
     ResetModel();
     ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
-    ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.85)
+    ASSERT_GE(effective_datarate_, cfg_.rc_target_bitrate * 0.85)
         << " The datarate for the file is lower than target by too much!";
-    ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.15)
+    ASSERT_LE(effective_datarate_, cfg_.rc_target_bitrate * 1.15)
         << " The datarate for the file is greater than target by too much!";
   }
 }
 
 // Check basic rate targeting for CBR.
-TEST_P(DatarateTestVP9Large, BasicRateTargeting444) {
+TEST_P(DatarateTestLarge, BasicRateTargeting444) {
   ::libvpx_test::Y4mVideoSource video("rush_hour_444.y4m", 0, 140);
 
   cfg_.g_profile = 1;
@@ -462,10 +189,10 @@
     ResetModel();
     ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
     ASSERT_GE(static_cast<double>(cfg_.rc_target_bitrate),
-              effective_datarate_[0] * 0.85)
+              effective_datarate_ * 0.85)
         << " The datarate for the file exceeds the target by too much!";
     ASSERT_LE(static_cast<double>(cfg_.rc_target_bitrate),
-              effective_datarate_[0] * 1.15)
+              effective_datarate_ * 1.15)
         << " The datarate for the file missed the target!"
         << cfg_.rc_target_bitrate << " "<< effective_datarate_;
   }
@@ -475,7 +202,7 @@
 // as the drop frame threshold is increased, and (2) that the total number of
 // frame drops does not decrease as we increase frame drop threshold.
 // Use a lower qp-max to force some frame drops.
-TEST_P(DatarateTestVP9Large, ChangingDropFrameThresh) {
+TEST_P(DatarateTestLarge, ChangingDropFrameThresh) {
   cfg_.rc_buf_initial_sz = 500;
   cfg_.rc_buf_optimal_sz = 500;
   cfg_.rc_buf_sz = 1000;
@@ -501,9 +228,9 @@
     cfg_.rc_dropframe_thresh = i;
     ResetModel();
     ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
-    ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.85)
+    ASSERT_GE(effective_datarate_, cfg_.rc_target_bitrate * 0.85)
         << " The datarate for the file is lower than target by too much!";
-    ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.15)
+    ASSERT_LE(effective_datarate_, cfg_.rc_target_bitrate * 1.15)
         << " The datarate for the file is greater than target by too much!";
     ASSERT_LE(first_drop_, last_drop)
         << " The first dropped frame for drop_thresh " << i
@@ -518,521 +245,8 @@
   }
 }
 
-// Check basic rate targeting for 2 temporal layers.
-TEST_P(DatarateTestVP9Large, BasicRateTargeting2TemporalLayers) {
-  cfg_.rc_buf_initial_sz = 500;
-  cfg_.rc_buf_optimal_sz = 500;
-  cfg_.rc_buf_sz = 1000;
-  cfg_.rc_dropframe_thresh = 1;
-  cfg_.rc_min_quantizer = 0;
-  cfg_.rc_max_quantizer = 63;
-  cfg_.rc_end_usage = VPX_CBR;
-  cfg_.g_lag_in_frames = 0;
-
-  // 2 Temporal layers, no spatial layers: Framerate decimation (2, 1).
-  cfg_.ss_number_layers = 1;
-  cfg_.ts_number_layers = 2;
-  cfg_.ts_rate_decimator[0] = 2;
-  cfg_.ts_rate_decimator[1] = 1;
-
-  cfg_.temporal_layering_mode = VP9E_TEMPORAL_LAYERING_MODE_BYPASS;
-
-  if (deadline_ == VPX_DL_REALTIME)
-    cfg_.g_error_resilient = 1;
-
-  ::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
-                                       30, 1, 0, 200);
-  for (int i = 200; i <= 800; i += 200) {
-    cfg_.rc_target_bitrate = i;
-    ResetModel();
-    // 60-40 bitrate allocation for 2 temporal layers.
-    cfg_.layer_target_bitrate[0] = 60 * cfg_.rc_target_bitrate / 100;
-    cfg_.layer_target_bitrate[1] = cfg_.rc_target_bitrate;
-    ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
-    for (int j = 0; j < static_cast<int>(cfg_.ts_number_layers); ++j) {
-      ASSERT_GE(effective_datarate_[j], cfg_.layer_target_bitrate[j] * 0.85)
-          << " The datarate for the file is lower than target by too much, "
-              "for layer: " << j;
-      ASSERT_LE(effective_datarate_[j], cfg_.layer_target_bitrate[j] * 1.15)
-          << " The datarate for the file is greater than target by too much, "
-              "for layer: " << j;
-    }
-  }
-}
-
-// Check basic rate targeting for 3 temporal layers.
-TEST_P(DatarateTestVP9Large, BasicRateTargeting3TemporalLayers) {
-  cfg_.rc_buf_initial_sz = 500;
-  cfg_.rc_buf_optimal_sz = 500;
-  cfg_.rc_buf_sz = 1000;
-  cfg_.rc_dropframe_thresh = 1;
-  cfg_.rc_min_quantizer = 0;
-  cfg_.rc_max_quantizer = 63;
-  cfg_.rc_end_usage = VPX_CBR;
-  cfg_.g_lag_in_frames = 0;
-
-  // 3 Temporal layers, no spatial layers: Framerate decimation (4, 2, 1).
-  cfg_.ss_number_layers = 1;
-  cfg_.ts_number_layers = 3;
-  cfg_.ts_rate_decimator[0] = 4;
-  cfg_.ts_rate_decimator[1] = 2;
-  cfg_.ts_rate_decimator[2] = 1;
-
-  cfg_.temporal_layering_mode = VP9E_TEMPORAL_LAYERING_MODE_BYPASS;
-
-  ::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
-                                       30, 1, 0, 200);
-  for (int i = 200; i <= 800; i += 200) {
-    cfg_.rc_target_bitrate = i;
-    ResetModel();
-    // 40-20-40 bitrate allocation for 3 temporal layers.
-    cfg_.layer_target_bitrate[0] = 40 * cfg_.rc_target_bitrate / 100;
-    cfg_.layer_target_bitrate[1] = 60 * cfg_.rc_target_bitrate / 100;
-    cfg_.layer_target_bitrate[2] = cfg_.rc_target_bitrate;
-    ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
-    for (int j = 0; j < static_cast<int>(cfg_.ts_number_layers); ++j) {
-      // TODO(yaowu): Work out more stable rc control strategy and
-      //              Adjust the thresholds to be tighter than .75.
-      ASSERT_GE(effective_datarate_[j], cfg_.layer_target_bitrate[j] * 0.75)
-          << " The datarate for the file is lower than target by too much, "
-              "for layer: " << j;
-      // TODO(yaowu): Work out more stable rc control strategy and
-      //              Adjust the thresholds to be tighter than 1.25.
-      ASSERT_LE(effective_datarate_[j], cfg_.layer_target_bitrate[j] * 1.25)
-          << " The datarate for the file is greater than target by too much, "
-              "for layer: " << j;
-    }
-  }
-}
-
-// Check basic rate targeting for 3 temporal layers, with frame dropping.
-// Only for one (low) bitrate with lower max_quantizer, and somewhat higher
-// frame drop threshold, to force frame dropping.
-TEST_P(DatarateTestVP9Large, BasicRateTargeting3TemporalLayersFrameDropping) {
-  cfg_.rc_buf_initial_sz = 500;
-  cfg_.rc_buf_optimal_sz = 500;
-  cfg_.rc_buf_sz = 1000;
-  // Set frame drop threshold and rc_max_quantizer to force some frame drops.
-  cfg_.rc_dropframe_thresh = 20;
-  cfg_.rc_max_quantizer = 45;
-  cfg_.rc_min_quantizer = 0;
-  cfg_.rc_end_usage = VPX_CBR;
-  cfg_.g_lag_in_frames = 0;
-
-  // 3 Temporal layers, no spatial layers: Framerate decimation (4, 2, 1).
-  cfg_.ss_number_layers = 1;
-  cfg_.ts_number_layers = 3;
-  cfg_.ts_rate_decimator[0] = 4;
-  cfg_.ts_rate_decimator[1] = 2;
-  cfg_.ts_rate_decimator[2] = 1;
-
-  cfg_.temporal_layering_mode = VP9E_TEMPORAL_LAYERING_MODE_BYPASS;
-
-  ::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
-                                       30, 1, 0, 200);
-  cfg_.rc_target_bitrate = 200;
-  ResetModel();
-  // 40-20-40 bitrate allocation for 3 temporal layers.
-  cfg_.layer_target_bitrate[0] = 40 * cfg_.rc_target_bitrate / 100;
-  cfg_.layer_target_bitrate[1] = 60 * cfg_.rc_target_bitrate / 100;
-  cfg_.layer_target_bitrate[2] = cfg_.rc_target_bitrate;
-  ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
-  for (int j = 0; j < static_cast<int>(cfg_.ts_number_layers); ++j) {
-    ASSERT_GE(effective_datarate_[j], cfg_.layer_target_bitrate[j] * 0.85)
-        << " The datarate for the file is lower than target by too much, "
-            "for layer: " << j;
-    ASSERT_LE(effective_datarate_[j], cfg_.layer_target_bitrate[j] * 1.15)
-        << " The datarate for the file is greater than target by too much, "
-            "for layer: " << j;
-    // Expect some frame drops in this test: for this 200 frames test,
-    // expect at least 10% and not more than 60% drops.
-    ASSERT_GE(num_drops_, 20);
-    ASSERT_LE(num_drops_, 130);
-  }
-}
-
-class DatarateOnePassCbrSvc : public ::libvpx_test::EncoderTest,
-    public ::libvpx_test::CodecTestWith2Params<libvpx_test::TestMode, int> {
- public:
-  DatarateOnePassCbrSvc() : EncoderTest(GET_PARAM(0)) {}
-  virtual ~DatarateOnePassCbrSvc() {}
- protected:
-  virtual void SetUp() {
-    InitializeConfig();
-    SetMode(GET_PARAM(1));
-    speed_setting_ = GET_PARAM(2);
-    ResetModel();
-  }
-  virtual void ResetModel() {
-    last_pts_ = 0;
-    bits_in_buffer_model_ = cfg_.rc_target_bitrate * cfg_.rc_buf_initial_sz;
-    frame_number_ = 0;
-    first_drop_ = 0;
-    bits_total_ = 0;
-    duration_ = 0.0;
-    mismatch_psnr_ = 0.0;
-    mismatch_nframes_ = 0;
-  }
-  virtual void BeginPassHook(unsigned int /*pass*/) {
-  }
-  virtual void PreEncodeFrameHook(::libvpx_test::VideoSource *video,
-                                  ::libvpx_test::Encoder *encoder) {
-    if (video->frame() == 0) {
-      int i;
-      for (i = 0; i < VPX_MAX_LAYERS; ++i) {
-        svc_params_.max_quantizers[i] = 63;
-        svc_params_.min_quantizers[i] = 0;
-      }
-      encoder->Control(VP9E_SET_SVC, 1);
-      encoder->Control(VP9E_SET_SVC_PARAMETERS, &svc_params_);
-      encoder->Control(VP8E_SET_CPUUSED, speed_setting_);
-      encoder->Control(VP9E_SET_TILE_COLUMNS, 0);
-      encoder->Control(VP8E_SET_MAX_INTRA_BITRATE_PCT, 300);
-      encoder->Control(VP9E_SET_TILE_COLUMNS, (cfg_.g_threads >> 1));
-    }
-    const vpx_rational_t tb = video->timebase();
-    timebase_ = static_cast<double>(tb.num) / tb.den;
-    duration_ = 0;
-  }
-  virtual void FramePktHook(const vpx_codec_cx_pkt_t *pkt) {
-    vpx_codec_pts_t duration = pkt->data.frame.pts - last_pts_;
-    if (last_pts_ == 0)
-      duration = 1;
-    bits_in_buffer_model_ += static_cast<int64_t>(
-        duration * timebase_ * cfg_.rc_target_bitrate * 1000);
-    const bool key_frame = (pkt->data.frame.flags & VPX_FRAME_IS_KEY)
-                         ? true: false;
-    if (!key_frame) {
-      ASSERT_GE(bits_in_buffer_model_, 0) << "Buffer Underrun at frame "
-          << pkt->data.frame.pts;
-    }
-    const size_t frame_size_in_bits = pkt->data.frame.sz * 8;
-    bits_in_buffer_model_ -= frame_size_in_bits;
-    bits_total_ += frame_size_in_bits;
-    if (!first_drop_ && duration > 1)
-      first_drop_ = last_pts_ + 1;
-    last_pts_ = pkt->data.frame.pts;
-    bits_in_last_frame_ = frame_size_in_bits;
-    ++frame_number_;
-  }
-  virtual void EndPassHook(void) {
-    if (bits_total_) {
-      const double file_size_in_kb = bits_total_ / 1000.;  // bits per kilobit
-      duration_ = (last_pts_ + 1) * timebase_;
-      file_datarate_ = file_size_in_kb / duration_;
-    }
-  }
-
-  virtual void MismatchHook(const vpx_image_t *img1,
-                            const vpx_image_t *img2) {
-    double mismatch_psnr = compute_psnr(img1, img2);
-    mismatch_psnr_ += mismatch_psnr;
-    ++mismatch_nframes_;
-  }
-
-  unsigned int GetMismatchFrames() {
-    return mismatch_nframes_;
-  }
-
-  vpx_codec_pts_t last_pts_;
-  int64_t bits_in_buffer_model_;
-  double timebase_;
-  int frame_number_;
-  vpx_codec_pts_t first_drop_;
-  int64_t bits_total_;
-  double duration_;
-  double file_datarate_;
-  size_t bits_in_last_frame_;
-  vpx_svc_extra_cfg_t svc_params_;
-  int speed_setting_;
-  double mismatch_psnr_;
-  int mismatch_nframes_;
-};
-static void assign_layer_bitrates(vpx_codec_enc_cfg_t *const enc_cfg,
-    const vpx_svc_extra_cfg_t *svc_params,
-    int spatial_layers,
-    int temporal_layers,
-    int temporal_layering_mode) {
-  int sl, spatial_layer_target;
-  float total = 0;
-  float alloc_ratio[VPX_MAX_LAYERS] = {0};
-  for (sl = 0; sl < spatial_layers; ++sl) {
-    if (svc_params->scaling_factor_den[sl] > 0) {
-      alloc_ratio[sl] = (float)(svc_params->scaling_factor_num[sl] *
-          1.0 / svc_params->scaling_factor_den[sl]);
-      total += alloc_ratio[sl];
-    }
-  }
-  for (sl = 0; sl < spatial_layers; ++sl) {
-    enc_cfg->ss_target_bitrate[sl] = spatial_layer_target =
-        (unsigned int)(enc_cfg->rc_target_bitrate *
-            alloc_ratio[sl] / total);
-    const int index = sl * temporal_layers;
-    if (temporal_layering_mode == 3) {
-      enc_cfg->layer_target_bitrate[index] =
-          spatial_layer_target >> 1;
-      enc_cfg->layer_target_bitrate[index + 1] =
-          (spatial_layer_target >> 1) + (spatial_layer_target >> 2);
-      enc_cfg->layer_target_bitrate[index + 2] =
-          spatial_layer_target;
-    } else if (temporal_layering_mode == 2) {
-      enc_cfg->layer_target_bitrate[index] =
-          spatial_layer_target * 2 / 3;
-      enc_cfg->layer_target_bitrate[index + 1] =
-          spatial_layer_target;
-    }
-  }
-}
-
-// Check basic rate targeting for 1 pass CBR SVC: 2 spatial layers and
-// 3 temporal layers. Run CIF clip with 1 thread.
-TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc2SpatialLayers) {
-  cfg_.rc_buf_initial_sz = 500;
-  cfg_.rc_buf_optimal_sz = 500;
-  cfg_.rc_buf_sz = 1000;
-  cfg_.rc_min_quantizer = 0;
-  cfg_.rc_max_quantizer = 63;
-  cfg_.rc_end_usage = VPX_CBR;
-  cfg_.g_lag_in_frames = 0;
-  cfg_.ss_number_layers = 2;
-  cfg_.ts_number_layers = 3;
-  cfg_.ts_rate_decimator[0] = 4;
-  cfg_.ts_rate_decimator[1] = 2;
-  cfg_.ts_rate_decimator[2] = 1;
-  cfg_.g_error_resilient = 1;
-  cfg_.g_threads = 1;
-  cfg_.temporal_layering_mode = 3;
-  svc_params_.scaling_factor_num[0] = 144;
-  svc_params_.scaling_factor_den[0] = 288;
-  svc_params_.scaling_factor_num[1] = 288;
-  svc_params_.scaling_factor_den[1] = 288;
-  cfg_.rc_dropframe_thresh = 10;
-  cfg_.kf_max_dist = 9999;
-  ::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
-                                       30, 1, 0, 200);
-  // TODO(wonkap/marpan): Check that effective_datarate for each layer hits the
-  // layer target_bitrate.
-  for (int i = 200; i <= 800; i += 200) {
-    cfg_.rc_target_bitrate = i;
-    ResetModel();
-    assign_layer_bitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,
-        cfg_.ts_number_layers, cfg_.temporal_layering_mode);
-    ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
-    ASSERT_GE(cfg_.rc_target_bitrate, file_datarate_ * 0.85)
-            << " The datarate for the file exceeds the target by too much!";
-    ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.15)
-        << " The datarate for the file is lower than the target by too much!";
-    EXPECT_EQ(static_cast<unsigned int>(0), GetMismatchFrames());
-  }
-}
-
-// Check basic rate targeting for 1 pass CBR SVC: 2 spatial layers and 3
-// temporal layers. Run CIF clip with 1 thread, and few short key frame periods.
-TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc2SpatialLayersSmallKf) {
-  cfg_.rc_buf_initial_sz = 500;
-  cfg_.rc_buf_optimal_sz = 500;
-  cfg_.rc_buf_sz = 1000;
-  cfg_.rc_min_quantizer = 0;
-  cfg_.rc_max_quantizer = 63;
-  cfg_.rc_end_usage = VPX_CBR;
-  cfg_.g_lag_in_frames = 0;
-  cfg_.ss_number_layers = 2;
-  cfg_.ts_number_layers = 3;
-  cfg_.ts_rate_decimator[0] = 4;
-  cfg_.ts_rate_decimator[1] = 2;
-  cfg_.ts_rate_decimator[2] = 1;
-  cfg_.g_error_resilient = 1;
-  cfg_.g_threads = 1;
-  cfg_.temporal_layering_mode = 3;
-  svc_params_.scaling_factor_num[0] = 144;
-  svc_params_.scaling_factor_den[0] = 288;
-  svc_params_.scaling_factor_num[1] = 288;
-  svc_params_.scaling_factor_den[1] = 288;
-  cfg_.rc_dropframe_thresh = 10;
-  ::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
-                                       30, 1, 0, 200);
-  cfg_.rc_target_bitrate = 400;
-  // For this 3 temporal layer case, pattern repeats every 4 frames, so choose
-  // 4 key neighboring key frame periods (so key frame will land on 0-2-1-2).
-  for (int j = 64; j <= 67; j++) {
-    cfg_.kf_max_dist = j;
-    ResetModel();
-    assign_layer_bitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,
-        cfg_.ts_number_layers, cfg_.temporal_layering_mode);
-    ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
-    ASSERT_GE(cfg_.rc_target_bitrate, file_datarate_ * 0.85)
-            << " The datarate for the file exceeds the target by too much!";
-    ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.15)
-        << " The datarate for the file is lower than the target by too much!";
-    EXPECT_EQ(static_cast<unsigned int>(0), GetMismatchFrames());
-  }
-}
-
-// Check basic rate targeting for 1 pass CBR SVC: 2 spatial layers and
-// 3 temporal layers. Run HD clip with 4 threads.
-TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc2SpatialLayers4threads) {
-  cfg_.rc_buf_initial_sz = 500;
-  cfg_.rc_buf_optimal_sz = 500;
-  cfg_.rc_buf_sz = 1000;
-  cfg_.rc_min_quantizer = 0;
-  cfg_.rc_max_quantizer = 63;
-  cfg_.rc_end_usage = VPX_CBR;
-  cfg_.g_lag_in_frames = 0;
-  cfg_.ss_number_layers = 2;
-  cfg_.ts_number_layers = 3;
-  cfg_.ts_rate_decimator[0] = 4;
-  cfg_.ts_rate_decimator[1] = 2;
-  cfg_.ts_rate_decimator[2] = 1;
-  cfg_.g_error_resilient = 1;
-  cfg_.g_threads = 4;
-  cfg_.temporal_layering_mode = 3;
-  svc_params_.scaling_factor_num[0] = 144;
-  svc_params_.scaling_factor_den[0] = 288;
-  svc_params_.scaling_factor_num[1] = 288;
-  svc_params_.scaling_factor_den[1] = 288;
-  cfg_.rc_dropframe_thresh = 10;
-  cfg_.kf_max_dist = 9999;
-  ::libvpx_test::I420VideoSource video("niklas_1280_720_30.y4m", 1280, 720,
-                                       30, 1, 0, 300);
-  cfg_.rc_target_bitrate = 800;
-  ResetModel();
-  assign_layer_bitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,
-      cfg_.ts_number_layers, cfg_.temporal_layering_mode);
-  ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
-  ASSERT_GE(cfg_.rc_target_bitrate, file_datarate_ * 0.85)
-          << " The datarate for the file exceeds the target by too much!";
-  ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.15)
-      << " The datarate for the file is lower than the target by too much!";
-  EXPECT_EQ(static_cast<unsigned int>(0), GetMismatchFrames());
-}
-
-// Check basic rate targeting for 1 pass CBR SVC: 3 spatial layers and
-// 3 temporal layers. Run CIF clip with 1 thread.
-TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc3SpatialLayers) {
-  cfg_.rc_buf_initial_sz = 500;
-  cfg_.rc_buf_optimal_sz = 500;
-  cfg_.rc_buf_sz = 1000;
-  cfg_.rc_min_quantizer = 0;
-  cfg_.rc_max_quantizer = 63;
-  cfg_.rc_end_usage = VPX_CBR;
-  cfg_.g_lag_in_frames = 0;
-  cfg_.ss_number_layers = 3;
-  cfg_.ts_number_layers = 3;
-  cfg_.ts_rate_decimator[0] = 4;
-  cfg_.ts_rate_decimator[1] = 2;
-  cfg_.ts_rate_decimator[2] = 1;
-  cfg_.g_error_resilient = 1;
-  cfg_.g_threads = 1;
-  cfg_.temporal_layering_mode = 3;
-  svc_params_.scaling_factor_num[0] = 72;
-  svc_params_.scaling_factor_den[0] = 288;
-  svc_params_.scaling_factor_num[1] = 144;
-  svc_params_.scaling_factor_den[1] = 288;
-  svc_params_.scaling_factor_num[2] = 288;
-  svc_params_.scaling_factor_den[2] = 288;
-  cfg_.rc_dropframe_thresh = 10;
-  cfg_.kf_max_dist = 9999;
-  ::libvpx_test::I420VideoSource video("niklas_1280_720_30.y4m", 1280, 720,
-                                       30, 1, 0, 300);
-  cfg_.rc_target_bitrate = 800;
-  ResetModel();
-  assign_layer_bitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,
-     cfg_.ts_number_layers, cfg_.temporal_layering_mode);
-  ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
-  ASSERT_GE(cfg_.rc_target_bitrate, file_datarate_ * 0.85)
-          << " The datarate for the file exceeds the target by too much!";
-  ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.22)
-      << " The datarate for the file is lower than the target by too much!";
-  EXPECT_EQ(static_cast<unsigned int>(0), GetMismatchFrames());
-}
-
-// Check basic rate targeting for 1 pass CBR SVC: 3 spatial layers and 3
-// temporal layers. Run CIF clip with 1 thread, and few short key frame periods.
-TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc3SpatialLayersSmallKf) {
-  cfg_.rc_buf_initial_sz = 500;
-  cfg_.rc_buf_optimal_sz = 500;
-  cfg_.rc_buf_sz = 1000;
-  cfg_.rc_min_quantizer = 0;
-  cfg_.rc_max_quantizer = 63;
-  cfg_.rc_end_usage = VPX_CBR;
-  cfg_.g_lag_in_frames = 0;
-  cfg_.ss_number_layers = 3;
-  cfg_.ts_number_layers = 3;
-  cfg_.ts_rate_decimator[0] = 4;
-  cfg_.ts_rate_decimator[1] = 2;
-  cfg_.ts_rate_decimator[2] = 1;
-  cfg_.g_error_resilient = 1;
-  cfg_.g_threads = 1;
-  cfg_.temporal_layering_mode = 3;
-  svc_params_.scaling_factor_num[0] = 72;
-  svc_params_.scaling_factor_den[0] = 288;
-  svc_params_.scaling_factor_num[1] = 144;
-  svc_params_.scaling_factor_den[1] = 288;
-  svc_params_.scaling_factor_num[2] = 288;
-  svc_params_.scaling_factor_den[2] = 288;
-  cfg_.rc_dropframe_thresh = 10;
-  ::libvpx_test::I420VideoSource video("niklas_1280_720_30.y4m", 1280, 720,
-                                       30, 1, 0, 300);
-  cfg_.rc_target_bitrate = 800;
-  // For this 3 temporal layer case, pattern repeats every 4 frames, so choose
-  // 4 key neighboring key frame periods (so key frame will land on 0-2-1-2).
-  for (int j = 32; j <= 35; j++) {
-    cfg_.kf_max_dist = j;
-    ResetModel();
-    assign_layer_bitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,
-       cfg_.ts_number_layers, cfg_.temporal_layering_mode);
-    ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
-    ASSERT_GE(cfg_.rc_target_bitrate, file_datarate_ * 0.85)
-            << " The datarate for the file exceeds the target by too much!";
-    ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.30)
-        << " The datarate for the file is lower than the target by too much!";
-    EXPECT_EQ(static_cast<unsigned int>(0), GetMismatchFrames());
-  }
-}
-
-// Check basic rate targeting for 1 pass CBR SVC: 3 spatial layers and
-// 3 temporal layers. Run HD clip with 4 threads.
-TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc3SpatialLayers4threads) {
-  cfg_.rc_buf_initial_sz = 500;
-  cfg_.rc_buf_optimal_sz = 500;
-  cfg_.rc_buf_sz = 1000;
-  cfg_.rc_min_quantizer = 0;
-  cfg_.rc_max_quantizer = 63;
-  cfg_.rc_end_usage = VPX_CBR;
-  cfg_.g_lag_in_frames = 0;
-  cfg_.ss_number_layers = 3;
-  cfg_.ts_number_layers = 3;
-  cfg_.ts_rate_decimator[0] = 4;
-  cfg_.ts_rate_decimator[1] = 2;
-  cfg_.ts_rate_decimator[2] = 1;
-  cfg_.g_error_resilient = 1;
-  cfg_.g_threads = 4;
-  cfg_.temporal_layering_mode = 3;
-  svc_params_.scaling_factor_num[0] = 72;
-  svc_params_.scaling_factor_den[0] = 288;
-  svc_params_.scaling_factor_num[1] = 144;
-  svc_params_.scaling_factor_den[1] = 288;
-  svc_params_.scaling_factor_num[2] = 288;
-  svc_params_.scaling_factor_den[2] = 288;
-  cfg_.rc_dropframe_thresh = 10;
-  cfg_.kf_max_dist = 9999;
-  ::libvpx_test::I420VideoSource video("niklas_1280_720_30.y4m", 1280, 720,
-                                       30, 1, 0, 300);
-  cfg_.rc_target_bitrate = 800;
-  ResetModel();
-  assign_layer_bitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,
-      cfg_.ts_number_layers, cfg_.temporal_layering_mode);
-  ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
-  ASSERT_GE(cfg_.rc_target_bitrate, file_datarate_ * 0.85)
-          << " The datarate for the file exceeds the target by too much!";
-  ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.22)
-      << " The datarate for the file is lower than the target by too much!";
-  EXPECT_EQ(static_cast<unsigned int>(0), GetMismatchFrames());
-}
-
-/* VP10 does not support multiple layers yet.
-VP10_INSTANTIATE_TEST_CASE(DatarateOnePassCbrSvc,
-                           ::testing::Values(::libvpx_test::kRealTime),
-                           ::testing::Range(5, 8));
-                           */
+VP10_INSTANTIATE_TEST_CASE(DatarateTestLarge,
+                           ::testing::Values(::libvpx_test::kOnePassGood,
+                                             ::libvpx_test::kRealTime),
+                           ::testing::Range(2, 9));
 }  // namespace