/*
 * Copyright (c) 2021, Alliance for Open Media. All rights reserved
 *
 * This source code is subject to the terms of the BSD 3-Clause Clear License
 * and the Alliance for Open Media Patent License 1.0. If the BSD 3-Clause Clear
 * License was not distributed with this source code in the LICENSE file, you
 * can obtain it at aomedia.org/license/software-license/bsd-3-c-c/.  If the
 * Alliance for Open Media Patent License 1.0 was not distributed with this
 * source code in the PATENTS file, you can obtain it at
 * aomedia.org/license/patent-license/.
 */

#include <smmintrin.h>

#include "config/aom_config.h"
#include "config/av1_rtcd.h"

#include "av1/common/restoration.h"
#include "aom_dsp/x86/synonyms.h"

// Load 4 halfwords from the possibly-misaligned pointer p, extend each
// halfword to 32-bit precision and return them in an SSE register.
static __m128i xx_load_extend_16_32(const void *p) {
  return _mm_cvtepu16_epi32(xx_loadl_64(p));
}

// Compute the scan of an SSE register holding 4 32-bit integers. If the
// register holds x0..x3 then the scan will hold x0, x0+x1, x0+x1+x2,
// x0+x1+x2+x3
static __m128i scan_32(__m128i x) {
  const __m128i x01 = _mm_add_epi32(x, _mm_slli_si128(x, 4));
  return _mm_add_epi32(x01, _mm_slli_si128(x01, 8));
}

// Compute two integral images from src. B sums elements; A sums their squares
//
// A and B should be aligned to 16 bytes. buf_stride should be a multiple of 4.
static void integral_images_highbd(const uint16_t *src, int src_stride,
                                   int width, int height, int32_t *A,
                                   int32_t *B, int buf_stride) {
  // Write out the zero top row
  memset(A, 0, sizeof(*A) * (width + 1));
  memset(B, 0, sizeof(*B) * (width + 1));

  const __m128i zero = _mm_setzero_si128();
  for (int i = 0; i < height; ++i) {
    // Zero the left column.
    A[(i + 1) * buf_stride] = B[(i + 1) * buf_stride] = 0;

    // ldiff is the difference H - D where H is the output sample immediately
    // to the left and D is the output sample above it. These are scalars,
    // replicated across the four lanes.
    __m128i ldiff1 = zero, ldiff2 = zero;
    for (int j = 0; j < width; j += 4) {
      const int ABj = 1 + j;

      const __m128i above1 = xx_load_128(B + ABj + i * buf_stride);
      const __m128i above2 = xx_load_128(A + ABj + i * buf_stride);

      const __m128i x1 = xx_load_extend_16_32(src + j + i * src_stride);
      const __m128i x2 = _mm_madd_epi16(x1, x1);

      const __m128i sc1 = scan_32(x1);
      const __m128i sc2 = scan_32(x2);

      const __m128i row1 = _mm_add_epi32(_mm_add_epi32(sc1, above1), ldiff1);
      const __m128i row2 = _mm_add_epi32(_mm_add_epi32(sc2, above2), ldiff2);

      xx_store_128(B + ABj + (i + 1) * buf_stride, row1);
      xx_store_128(A + ABj + (i + 1) * buf_stride, row2);

      // Calculate the new H - D.
      ldiff1 = _mm_shuffle_epi32(_mm_sub_epi32(row1, above1), 0xff);
      ldiff2 = _mm_shuffle_epi32(_mm_sub_epi32(row2, above2), 0xff);
    }
  }
}

// Compute 4 values of boxsum from the given integral image. ii should point
// at the middle of the box (for the first value). r is the box radius.
static INLINE __m128i boxsum_from_ii(const int32_t *ii, int stride, int r) {
  const __m128i tl = xx_loadu_128(ii - (r + 1) - (r + 1) * stride);
  const __m128i tr = xx_loadu_128(ii + (r + 0) - (r + 1) * stride);
  const __m128i bl = xx_loadu_128(ii - (r + 1) + r * stride);
  const __m128i br = xx_loadu_128(ii + (r + 0) + r * stride);
  const __m128i u = _mm_sub_epi32(tr, tl);
  const __m128i v = _mm_sub_epi32(br, bl);
  return _mm_sub_epi32(v, u);
}

static __m128i round_for_shift(unsigned shift) {
  return _mm_set1_epi32((1 << shift) >> 1);
}

static __m128i compute_p(__m128i sum1, __m128i sum2, int bit_depth, int n) {
  __m128i an, bb;
  if (bit_depth > 8) {
    const __m128i rounding_a = round_for_shift(2 * (bit_depth - 8));
    const __m128i rounding_b = round_for_shift(bit_depth - 8);
    const __m128i shift_a = _mm_cvtsi32_si128(2 * (bit_depth - 8));
    const __m128i shift_b = _mm_cvtsi32_si128(bit_depth - 8);
    const __m128i a = _mm_srl_epi32(_mm_add_epi32(sum2, rounding_a), shift_a);
    const __m128i b = _mm_srl_epi32(_mm_add_epi32(sum1, rounding_b), shift_b);
    // b < 2^14, so we can use a 16-bit madd rather than a 32-bit
    // mullo to square it
    bb = _mm_madd_epi16(b, b);
    an = _mm_max_epi32(_mm_mullo_epi32(a, _mm_set1_epi32(n)), bb);
  } else {
    bb = _mm_madd_epi16(sum1, sum1);
    an = _mm_mullo_epi32(sum2, _mm_set1_epi32(n));
  }
  return _mm_sub_epi32(an, bb);
}

// Assumes that C, D are integral images for the original buffer which has been
// extended to have a padding of SGRPROJ_BORDER_VERT/SGRPROJ_BORDER_HORZ pixels
// on the sides. A, B, C, D point at logical position (0, 0).
static void calc_ab(int32_t *A, int32_t *B, const int32_t *C, const int32_t *D,
                    int width, int height, int buf_stride, int bit_depth,
                    int sgr_params_idx, int radius_idx) {
  const sgr_params_type *const params = &av1_sgr_params[sgr_params_idx];
  const int r = params->r[radius_idx];
  const int n = (2 * r + 1) * (2 * r + 1);
  const __m128i s = _mm_set1_epi32(params->s[radius_idx]);
  // one_over_n[n-1] is 2^12/n, so easily fits in an int16
  const __m128i one_over_n = _mm_set1_epi32(av1_one_by_x[n - 1]);

  const __m128i rnd_z = round_for_shift(SGRPROJ_MTABLE_BITS);
  const __m128i rnd_res = round_for_shift(SGRPROJ_RECIP_BITS);

  // Set up masks
  const __m128i ones32 = _mm_set_epi32(0, 0, 0xffffffff, 0xffffffff);
  __m128i mask[4];
  for (int idx = 0; idx < 4; idx++) {
    const __m128i shift = _mm_cvtsi32_si128(8 * (4 - idx));
    mask[idx] = _mm_cvtepi8_epi32(_mm_srl_epi64(ones32, shift));
  }

  for (int i = -1; i < height + 1; ++i) {
    for (int j = -1; j < width + 1; j += 4) {
      const int32_t *Cij = C + i * buf_stride + j;
      const int32_t *Dij = D + i * buf_stride + j;

      __m128i sum1 = boxsum_from_ii(Dij, buf_stride, r);
      __m128i sum2 = boxsum_from_ii(Cij, buf_stride, r);

      // When width + 2 isn't a multiple of 4, sum1 and sum2 will contain
      // some uninitialised data in their upper words. We use a mask to
      // ensure that these bits are set to 0.
      int idx = AOMMIN(4, width + 1 - j);
      assert(idx >= 1);

      if (idx < 4) {
        sum1 = _mm_and_si128(mask[idx], sum1);
        sum2 = _mm_and_si128(mask[idx], sum2);
      }

      const __m128i p = compute_p(sum1, sum2, bit_depth, n);

      const __m128i z = _mm_min_epi32(
          _mm_srli_epi32(_mm_add_epi32(_mm_mullo_epi32(p, s), rnd_z),
                         SGRPROJ_MTABLE_BITS),
          _mm_set1_epi32(255));

      // 'Gather' type instructions are not available pre-AVX2, so synthesize a
      // gather using scalar loads.
      const __m128i a_res =
          _mm_set_epi32(av1_x_by_xplus1[_mm_extract_epi32(z, 3)],
                        av1_x_by_xplus1[_mm_extract_epi32(z, 2)],
                        av1_x_by_xplus1[_mm_extract_epi32(z, 1)],
                        av1_x_by_xplus1[_mm_extract_epi32(z, 0)]);

      xx_storeu_128(A + i * buf_stride + j, a_res);

      const __m128i a_complement =
          _mm_sub_epi32(_mm_set1_epi32(SGRPROJ_SGR), a_res);

      // sum1 might have lanes greater than 2^15, so we can't use madd to do
      // multiplication involving sum1. However, a_complement and one_over_n
      // are both less than 256, so we can multiply them first.
      const __m128i a_comp_over_n = _mm_madd_epi16(a_complement, one_over_n);
      const __m128i b_int = _mm_mullo_epi32(a_comp_over_n, sum1);
      const __m128i b_res =
          _mm_srli_epi32(_mm_add_epi32(b_int, rnd_res), SGRPROJ_RECIP_BITS);

      xx_storeu_128(B + i * buf_stride + j, b_res);
    }
  }
}

// Calculate 4 values of the "cross sum" starting at buf. This is a 3x3 filter
// where the outer four corners have weight 3 and all other pixels have weight
// 4.
//
// Pixels are indexed like this:
// xtl  xt   xtr
// xl    x   xr
// xbl  xb   xbr
//
// buf points to x
//
// fours = xl + xt + xr + xb + x
// threes = xtl + xtr + xbr + xbl
// cross_sum = 4 * fours + 3 * threes
//           = 4 * (fours + threes) - threes
//           = (fours + threes) << 2 - threes
static INLINE __m128i cross_sum(const int32_t *buf, int stride) {
  const __m128i xtl = xx_loadu_128(buf - 1 - stride);
  const __m128i xt = xx_loadu_128(buf - stride);
  const __m128i xtr = xx_loadu_128(buf + 1 - stride);
  const __m128i xl = xx_loadu_128(buf - 1);
  const __m128i x = xx_loadu_128(buf);
  const __m128i xr = xx_loadu_128(buf + 1);
  const __m128i xbl = xx_loadu_128(buf - 1 + stride);
  const __m128i xb = xx_loadu_128(buf + stride);
  const __m128i xbr = xx_loadu_128(buf + 1 + stride);

  const __m128i fours = _mm_add_epi32(
      xl, _mm_add_epi32(xt, _mm_add_epi32(xr, _mm_add_epi32(xb, x))));
  const __m128i threes =
      _mm_add_epi32(xtl, _mm_add_epi32(xtr, _mm_add_epi32(xbr, xbl)));

  return _mm_sub_epi32(_mm_slli_epi32(_mm_add_epi32(fours, threes), 2), threes);
}

// The final filter for self-guided restoration. Computes a weighted average
// across A, B with "cross sums" (see cross_sum implementation above).
static void final_filter(int32_t *dst, int dst_stride, const int32_t *A,
                         const int32_t *B, int buf_stride, const uint16_t *dgd,
                         int dgd_stride, int width, int height) {
  const int nb = 5;
  const __m128i rounding =
      round_for_shift(SGRPROJ_SGR_BITS + nb - SGRPROJ_RST_BITS);

  for (int i = 0; i < height; ++i) {
    for (int j = 0; j < width; j += 4) {
      const __m128i a = cross_sum(A + i * buf_stride + j, buf_stride);
      const __m128i b = cross_sum(B + i * buf_stride + j, buf_stride);
      const __m128i raw = xx_loadl_64(dgd + (i * dgd_stride + j));
      const __m128i src = _mm_cvtepu16_epi32(raw);

      __m128i v = _mm_add_epi32(_mm_madd_epi16(a, src), b);
      __m128i w = _mm_srai_epi32(_mm_add_epi32(v, rounding),
                                 SGRPROJ_SGR_BITS + nb - SGRPROJ_RST_BITS);

      xx_storeu_128(dst + i * dst_stride + j, w);
    }
  }
}

// Assumes that C, D are integral images for the original buffer which has been
// extended to have a padding of SGRPROJ_BORDER_VERT/SGRPROJ_BORDER_HORZ pixels
// on the sides. A, B, C, D point at logical position (0, 0).
static void calc_ab_fast(int32_t *A, int32_t *B, const int32_t *C,
                         const int32_t *D, int width, int height,
                         int buf_stride, int bit_depth, int sgr_params_idx,
                         int radius_idx) {
  const sgr_params_type *const params = &av1_sgr_params[sgr_params_idx];
  const int r = params->r[radius_idx];
  const int n = (2 * r + 1) * (2 * r + 1);
  const __m128i s = _mm_set1_epi32(params->s[radius_idx]);
  // one_over_n[n-1] is 2^12/n, so easily fits in an int16
  const __m128i one_over_n = _mm_set1_epi32(av1_one_by_x[n - 1]);

  const __m128i rnd_z = round_for_shift(SGRPROJ_MTABLE_BITS);
  const __m128i rnd_res = round_for_shift(SGRPROJ_RECIP_BITS);

  // Set up masks
  const __m128i ones32 = _mm_set_epi32(0, 0, 0xffffffff, 0xffffffff);
  __m128i mask[4];
  for (int idx = 0; idx < 4; idx++) {
    const __m128i shift = _mm_cvtsi32_si128(8 * (4 - idx));
    mask[idx] = _mm_cvtepi8_epi32(_mm_srl_epi64(ones32, shift));
  }

  for (int i = -1; i < height + 1; i += 2) {
    for (int j = -1; j < width + 1; j += 4) {
      const int32_t *Cij = C + i * buf_stride + j;
      const int32_t *Dij = D + i * buf_stride + j;

      __m128i sum1 = boxsum_from_ii(Dij, buf_stride, r);
      __m128i sum2 = boxsum_from_ii(Cij, buf_stride, r);

      // When width + 2 isn't a multiple of 4, sum1 and sum2 will contain
      // some uninitialised data in their upper words. We use a mask to
      // ensure that these bits are set to 0.
      int idx = AOMMIN(4, width + 1 - j);
      assert(idx >= 1);

      if (idx < 4) {
        sum1 = _mm_and_si128(mask[idx], sum1);
        sum2 = _mm_and_si128(mask[idx], sum2);
      }

      const __m128i p = compute_p(sum1, sum2, bit_depth, n);

      const __m128i z = _mm_min_epi32(
          _mm_srli_epi32(_mm_add_epi32(_mm_mullo_epi32(p, s), rnd_z),
                         SGRPROJ_MTABLE_BITS),
          _mm_set1_epi32(255));

      // 'Gather' type instructions are not available pre-AVX2, so synthesize a
      // gather using scalar loads.
      const __m128i a_res =
          _mm_set_epi32(av1_x_by_xplus1[_mm_extract_epi32(z, 3)],
                        av1_x_by_xplus1[_mm_extract_epi32(z, 2)],
                        av1_x_by_xplus1[_mm_extract_epi32(z, 1)],
                        av1_x_by_xplus1[_mm_extract_epi32(z, 0)]);

      xx_storeu_128(A + i * buf_stride + j, a_res);

      const __m128i a_complement =
          _mm_sub_epi32(_mm_set1_epi32(SGRPROJ_SGR), a_res);

      // sum1 might have lanes greater than 2^15, so we can't use madd to do
      // multiplication involving sum1. However, a_complement and one_over_n
      // are both less than 256, so we can multiply them first.
      const __m128i a_comp_over_n = _mm_madd_epi16(a_complement, one_over_n);
      const __m128i b_int = _mm_mullo_epi32(a_comp_over_n, sum1);
      const __m128i b_res =
          _mm_srli_epi32(_mm_add_epi32(b_int, rnd_res), SGRPROJ_RECIP_BITS);

      xx_storeu_128(B + i * buf_stride + j, b_res);
    }
  }
}

// Calculate 4 values of the "cross sum" starting at buf.
//
// Pixels are indexed like this:
// xtl  xt   xtr
//  -   buf   -
// xbl  xb   xbr
//
// Pixels are weighted like this:
//  5    6    5
//  0    0    0
//  5    6    5
//
// fives = xtl + xtr + xbl + xbr
// sixes = xt + xb
// cross_sum = 6 * sixes + 5 * fives
//           = 5 * (fives + sixes) - sixes
//           = (fives + sixes) << 2 + (fives + sixes) + sixes
static INLINE __m128i cross_sum_fast_even_row(const int32_t *buf, int stride) {
  const __m128i xtl = xx_loadu_128(buf - 1 - stride);
  const __m128i xt = xx_loadu_128(buf - stride);
  const __m128i xtr = xx_loadu_128(buf + 1 - stride);
  const __m128i xbl = xx_loadu_128(buf - 1 + stride);
  const __m128i xb = xx_loadu_128(buf + stride);
  const __m128i xbr = xx_loadu_128(buf + 1 + stride);

  const __m128i fives =
      _mm_add_epi32(xtl, _mm_add_epi32(xtr, _mm_add_epi32(xbr, xbl)));
  const __m128i sixes = _mm_add_epi32(xt, xb);
  const __m128i fives_plus_sixes = _mm_add_epi32(fives, sixes);

  return _mm_add_epi32(
      _mm_add_epi32(_mm_slli_epi32(fives_plus_sixes, 2), fives_plus_sixes),
      sixes);
}

// Calculate 4 values of the "cross sum" starting at buf.
//
// Pixels are indexed like this:
// xl    x   xr
//
// Pixels are weighted like this:
//  5    6    5
//
// buf points to x
//
// fives = xl + xr
// sixes = x
// cross_sum = 5 * fives + 6 * sixes
//           = 4 * (fives + sixes) + (fives + sixes) + sixes
//           = (fives + sixes) << 2 + (fives + sixes) + sixes
static INLINE __m128i cross_sum_fast_odd_row(const int32_t *buf) {
  const __m128i xl = xx_loadu_128(buf - 1);
  const __m128i x = xx_loadu_128(buf);
  const __m128i xr = xx_loadu_128(buf + 1);

  const __m128i fives = _mm_add_epi32(xl, xr);
  const __m128i sixes = x;

  const __m128i fives_plus_sixes = _mm_add_epi32(fives, sixes);

  return _mm_add_epi32(
      _mm_add_epi32(_mm_slli_epi32(fives_plus_sixes, 2), fives_plus_sixes),
      sixes);
}

// The final filter for the self-guided restoration. Computes a
// weighted average across A, B with "cross sums" (see cross_sum_...
// implementations above).
static void final_filter_fast(int32_t *dst, int dst_stride, const int32_t *A,
                              const int32_t *B, int buf_stride,
                              const uint16_t *dgd, int dgd_stride, int width,
                              int height) {
  const int nb0 = 5;
  const int nb1 = 4;

  const __m128i rounding0 =
      round_for_shift(SGRPROJ_SGR_BITS + nb0 - SGRPROJ_RST_BITS);
  const __m128i rounding1 =
      round_for_shift(SGRPROJ_SGR_BITS + nb1 - SGRPROJ_RST_BITS);

  for (int i = 0; i < height; ++i) {
    if (!(i & 1)) {  // even row
      for (int j = 0; j < width; j += 4) {
        const __m128i a =
            cross_sum_fast_even_row(A + i * buf_stride + j, buf_stride);
        const __m128i b =
            cross_sum_fast_even_row(B + i * buf_stride + j, buf_stride);
        const __m128i raw = xx_loadl_64(dgd + (i * dgd_stride + j));
        const __m128i src = _mm_cvtepu16_epi32(raw);

        __m128i v = _mm_add_epi32(_mm_madd_epi16(a, src), b);
        __m128i w = _mm_srai_epi32(_mm_add_epi32(v, rounding0),
                                   SGRPROJ_SGR_BITS + nb0 - SGRPROJ_RST_BITS);

        xx_storeu_128(dst + i * dst_stride + j, w);
      }
    } else {  // odd row
      for (int j = 0; j < width; j += 4) {
        const __m128i a = cross_sum_fast_odd_row(A + i * buf_stride + j);
        const __m128i b = cross_sum_fast_odd_row(B + i * buf_stride + j);

        const __m128i raw = xx_loadl_64(dgd + (i * dgd_stride + j));
        const __m128i src = _mm_cvtepu16_epi32(raw);

        __m128i v = _mm_add_epi32(_mm_madd_epi16(a, src), b);
        __m128i w = _mm_srai_epi32(_mm_add_epi32(v, rounding1),
                                   SGRPROJ_SGR_BITS + nb1 - SGRPROJ_RST_BITS);

        xx_storeu_128(dst + i * dst_stride + j, w);
      }
    }
  }
}

int av1_selfguided_restoration_sse4_1(const uint16_t *dgd, int width,
                                      int height, int dgd_stride, int32_t *flt0,
                                      int32_t *flt1, int flt_stride,
                                      int sgr_params_idx, int bit_depth) {
  int32_t *buf = (int32_t *)aom_memalign(
      16, 4 * sizeof(*buf) * RESTORATION_PROC_UNIT_PELS);
  if (!buf) return -1;
  memset(buf, 0, 4 * sizeof(*buf) * RESTORATION_PROC_UNIT_PELS);

  const int width_ext = width + 2 * SGRPROJ_BORDER_HORZ;
  const int height_ext = height + 2 * SGRPROJ_BORDER_VERT;

  // Adjusting the stride of A and B here appears to avoid bad cache effects,
  // leading to a significant speed improvement.
  // We also align the stride to a multiple of 16 bytes for efficiency.
  int buf_stride = ((width_ext + 3) & ~3) + 16;

  // The "tl" pointers point at the top-left of the initialised data for the
  // array. Adding 3 here ensures that column 1 is 16-byte aligned.
  int32_t *Atl = buf + 0 * RESTORATION_PROC_UNIT_PELS + 3;
  int32_t *Btl = buf + 1 * RESTORATION_PROC_UNIT_PELS + 3;
  int32_t *Ctl = buf + 2 * RESTORATION_PROC_UNIT_PELS + 3;
  int32_t *Dtl = buf + 3 * RESTORATION_PROC_UNIT_PELS + 3;

  // The "0" pointers are (- SGRPROJ_BORDER_VERT, -SGRPROJ_BORDER_HORZ). Note
  // there's a zero row and column in A, B (integral images), so we move down
  // and right one for them.
  const int buf_diag_border =
      SGRPROJ_BORDER_HORZ + buf_stride * SGRPROJ_BORDER_VERT;

  int32_t *A0 = Atl + 1 + buf_stride;
  int32_t *B0 = Btl + 1 + buf_stride;
  int32_t *C0 = Ctl + 1 + buf_stride;
  int32_t *D0 = Dtl + 1 + buf_stride;

  // Finally, A, B, C, D point at position (0, 0).
  int32_t *A = A0 + buf_diag_border;
  int32_t *B = B0 + buf_diag_border;
  int32_t *C = C0 + buf_diag_border;
  int32_t *D = D0 + buf_diag_border;

  const int dgd_diag_border =
      SGRPROJ_BORDER_HORZ + dgd_stride * SGRPROJ_BORDER_VERT;
  const uint16_t *dgd0 = dgd - dgd_diag_border;

  // Generate integral images from the input. C will contain sums of squares; D
  // will contain just sums
  integral_images_highbd(dgd0, dgd_stride, width_ext, height_ext, Ctl, Dtl,
                         buf_stride);

  const sgr_params_type *const params = &av1_sgr_params[sgr_params_idx];
  // Write to flt0 and flt1
  // If params->r == 0 we skip the corresponding filter. We only allow one of
  // the radii to be 0, as having both equal to 0 would be equivalent to
  // skipping SGR entirely.
  assert(!(params->r[0] == 0 && params->r[1] == 0));
  assert(params->r[0] < AOMMIN(SGRPROJ_BORDER_VERT, SGRPROJ_BORDER_HORZ));
  assert(params->r[1] < AOMMIN(SGRPROJ_BORDER_VERT, SGRPROJ_BORDER_HORZ));

  if (params->r[0] > 0) {
    calc_ab_fast(A, B, C, D, width, height, buf_stride, bit_depth,
                 sgr_params_idx, 0);
    final_filter_fast(flt0, flt_stride, A, B, buf_stride, dgd, dgd_stride,
                      width, height);
  }

  if (params->r[1] > 0) {
    calc_ab(A, B, C, D, width, height, buf_stride, bit_depth, sgr_params_idx,
            1);
    final_filter(flt1, flt_stride, A, B, buf_stride, dgd, dgd_stride, width,
                 height);
  }
  aom_free(buf);
  return 0;
}

void av1_apply_selfguided_restoration_sse4_1(const uint16_t *dat, int width,
                                             int height, int stride, int eps,
                                             const int *xqd, uint16_t *dst,
                                             int dst_stride, int32_t *tmpbuf,
                                             int bit_depth) {
  int32_t *flt0 = tmpbuf;
  int32_t *flt1 = flt0 + RESTORATION_UNITPELS_MAX;
  assert(width * height <= RESTORATION_UNITPELS_MAX);
  const int ret = av1_selfguided_restoration_sse4_1(
      dat, width, height, stride, flt0, flt1, width, eps, bit_depth);
  (void)ret;
  assert(!ret);
  const sgr_params_type *const params = &av1_sgr_params[eps];
  int xq[2];
  av1_decode_xq(xqd, xq, params);

  __m128i xq0 = _mm_set1_epi32(xq[0]);
  __m128i xq1 = _mm_set1_epi32(xq[1]);

  for (int i = 0; i < height; ++i) {
    // Calculate output in batches of 8 pixels
    for (int j = 0; j < width; j += 8) {
      const int k = i * width + j;
      const int m = i * dst_stride + j;

      const uint16_t *datij = dat + i * stride + j;
      __m128i src;
      src = xx_loadu_128(datij);

      const __m128i u = _mm_slli_epi16(src, SGRPROJ_RST_BITS);
      const __m128i u_0 = _mm_cvtepu16_epi32(u);
      const __m128i u_1 = _mm_cvtepu16_epi32(_mm_srli_si128(u, 8));

      __m128i v_0 = _mm_slli_epi32(u_0, SGRPROJ_PRJ_BITS);
      __m128i v_1 = _mm_slli_epi32(u_1, SGRPROJ_PRJ_BITS);

      if (params->r[0] > 0) {
        const __m128i f1_0 = _mm_sub_epi32(xx_loadu_128(&flt0[k]), u_0);
        v_0 = _mm_add_epi32(v_0, _mm_mullo_epi32(xq0, f1_0));

        const __m128i f1_1 = _mm_sub_epi32(xx_loadu_128(&flt0[k + 4]), u_1);
        v_1 = _mm_add_epi32(v_1, _mm_mullo_epi32(xq0, f1_1));
      }

      if (params->r[1] > 0) {
        const __m128i f2_0 = _mm_sub_epi32(xx_loadu_128(&flt1[k]), u_0);
        v_0 = _mm_add_epi32(v_0, _mm_mullo_epi32(xq1, f2_0));

        const __m128i f2_1 = _mm_sub_epi32(xx_loadu_128(&flt1[k + 4]), u_1);
        v_1 = _mm_add_epi32(v_1, _mm_mullo_epi32(xq1, f2_1));
      }

      const __m128i rounding =
          round_for_shift(SGRPROJ_PRJ_BITS + SGRPROJ_RST_BITS);
      const __m128i w_0 = _mm_srai_epi32(_mm_add_epi32(v_0, rounding),
                                         SGRPROJ_PRJ_BITS + SGRPROJ_RST_BITS);
      const __m128i w_1 = _mm_srai_epi32(_mm_add_epi32(v_1, rounding),
                                         SGRPROJ_PRJ_BITS + SGRPROJ_RST_BITS);

      // Pack into 16 bits and clamp to [0, 2^bit_depth)
      const __m128i tmp = _mm_packus_epi32(w_0, w_1);
      const __m128i max = _mm_set1_epi16((1 << bit_depth) - 1);
      const __m128i res = _mm_min_epi16(tmp, max);
      xx_storeu_128(dst + m, res);
    }
  }
}