/*
 * Copyright (c) 2021, Alliance for Open Media. All rights reserved
 *
 * This source code is subject to the terms of the BSD 3-Clause Clear License
 * and the Alliance for Open Media Patent License 1.0. If the BSD 3-Clause Clear
 * License was not distributed with this source code in the LICENSE file, you
 * can obtain it at aomedia.org/license/software-license/bsd-3-c-c/.  If the
 * Alliance for Open Media Patent License 1.0 was not distributed with this
 * source code in the PATENTS file, you can obtain it at
 * aomedia.org/license/patent-license/.
 */

#include <math.h>

#include "aom_ports/mem.h"

#include "av1/encoder/aq_variance.h"
#include "av1/common/seg_common.h"
#include "av1/encoder/encodeframe.h"
#include "av1/encoder/ratectrl.h"
#include "av1/encoder/rd.h"
#include "av1/encoder/segmentation.h"
#include "av1/encoder/dwt.h"
#include "aom_ports/system_state.h"

static const double rate_ratio[MAX_SEGMENTS] = { 2.2, 1.7, 1.3, 1.0,
                                                 0.9, .8,  .7,  .6 };

static const double deltaq_rate_ratio[MAX_SEGMENTS] = { 2.5,  2.0, 1.5, 1.0,
                                                        0.75, 1.0, 1.0, 1.0 };

#define ENERGY_MIN (-4)
#define ENERGY_MAX (1)
#define ENERGY_SPAN (ENERGY_MAX - ENERGY_MIN + 1)
#define ENERGY_IN_BOUNDS(energy) \
  assert((energy) >= ENERGY_MIN && (energy) <= ENERGY_MAX)

DECLARE_ALIGNED(16, static const uint16_t,
                av1_highbd_all_zeros[MAX_SB_SIZE]) = { 0 };

static const int segment_id[ENERGY_SPAN] = { 0, 1, 1, 2, 3, 4 };

#define SEGMENT_ID(i) segment_id[(i) - ENERGY_MIN]

void av1_vaq_frame_setup(AV1_COMP *cpi) {
  AV1_COMMON *cm = &cpi->common;
  const int base_qindex = cm->quant_params.base_qindex;
  struct segmentation *seg = &cm->seg;
  int i;

  int resolution_change =
      cm->prev_frame && (cm->width != cm->prev_frame->width ||
                         cm->height != cm->prev_frame->height);
  int avg_energy = (int)(cpi->twopass.mb_av_energy - 2);
  double avg_ratio;
  if (avg_energy > 7) avg_energy = 7;
  if (avg_energy < 0) avg_energy = 0;
  avg_ratio = rate_ratio[avg_energy];

  if (resolution_change) {
    memset(cpi->enc_seg.map, 0, cm->mi_params.mi_rows * cm->mi_params.mi_cols);
    av1_clearall_segfeatures(seg);
    aom_clear_system_state();
    av1_disable_segmentation(seg);
    return;
  }
  if (frame_is_intra_only(cm) || cm->features.error_resilient_mode) {
    cpi->vaq_refresh = 1;

    av1_enable_segmentation(seg);
    av1_clearall_segfeatures(seg);

    aom_clear_system_state();

#if CONFIG_EXT_SEG
    // TODO: This workaround is needed because existing aq_mode=1 is only
    // defined for 8 energy levles.
    const int max_seg_num = MAX_SEGMENTS_8;
#else   // CONFIG_EXT_SEG
    const int max_seg_num = MAX_SEGMENTS;
#endif  // CONFIG_EXT_SEG
    for (i = 0; i < max_seg_num; ++i) {
      // Set up avg segment id to be 1.0 and adjust the other segments around
      // it.
      int qindex_delta = av1_compute_qdelta_by_rate(
          &cpi->rc, cm->current_frame.frame_type, base_qindex,
          rate_ratio[i] / avg_ratio, cpi->is_screen_content_type,
          cm->seq_params.bit_depth);

      // We don't allow qindex 0 in a segment if the base value is not 0.
      // Q index 0 (lossless) implies 4x4 encoding only and in AQ mode a segment
      // Q delta is sometimes applied without going back around the rd loop.
      // This could lead to an illegal combination of partition size and q.
      if ((base_qindex != 0) && ((base_qindex + qindex_delta) == 0)) {
        qindex_delta = -base_qindex + 1;
      }

      av1_set_segdata(seg, i, SEG_LVL_ALT_Q, qindex_delta);
      av1_enable_segfeature(seg, i, SEG_LVL_ALT_Q);
    }

#if CONFIG_EXT_SEG
    // TODO: This workaround is needed because existing aq_mode=1 is only
    // defined for 8 energy levles, hence mapped to seg_id = [0..7] only. So,
    // until it is defined. disable ALT_Q/seg_id MAX_SEGMENTS_8 or greater.
    //
    // Please refer to the code, where energy level decides the seg_id,
    // in setup_block_rdmult()
    //   energy = av1_log_block_var(cpi, x, bsize);
    //   mbmi->segment_id = energy;

    SequenceHeader *const seq_params = &cm->seq_params;
    cm->seg.enable_ext_seg = seq_params->enable_ext_seg;

    if (cm->seg.enable_ext_seg) {
      for (i = MAX_SEGMENTS_8; i < MAX_SEGMENTS; ++i) {
        av1_disable_segfeature(seg, i, SEG_LVL_ALT_Q);
      }
    }
#endif  // CONFIG_EXT_SEG
  }
}

int av1_log_block_var(const AV1_COMP *cpi, MACROBLOCK *x, BLOCK_SIZE bs) {
  // This functions returns a score for the blocks local variance as calculated
  // by: sum of the log of the (4x4 variances) of each subblock to the current
  // block (x,bs)
  // * 32 / number of pixels in the block_size.
  // This is used for segmentation because to avoid situations in which a large
  // block with a gentle gradient gets marked high variance even though each
  // subblock has a low variance.   This allows us to assign the same segment
  // number for the same sorts of area regardless of how the partitioning goes.

  MACROBLOCKD *xd = &x->e_mbd;
  double var = 0;
  unsigned int sse;
  int i, j;

  int right_overflow =
      (xd->mb_to_right_edge < 0) ? ((-xd->mb_to_right_edge) >> 3) : 0;
  int bottom_overflow =
      (xd->mb_to_bottom_edge < 0) ? ((-xd->mb_to_bottom_edge) >> 3) : 0;

  const int bw = MI_SIZE * mi_size_wide[bs] - right_overflow;
  const int bh = MI_SIZE * mi_size_high[bs] - bottom_overflow;

  aom_clear_system_state();

  for (i = 0; i < bh; i += 4) {
    for (j = 0; j < bw; j += 4) {
      var +=
          log(1.0 + cpi->fn_ptr[BLOCK_4X4].vf(
                        x->plane[0].src.buf + i * x->plane[0].src.stride + j,
                        x->plane[0].src.stride, av1_highbd_all_zeros, 0, &sse) /
                        16);
    }
  }
  // Use average of 4x4 log variance. The range for 8 bit 0 - 9.704121561.
  var /= (bw / 4 * bh / 4);
  if (var > 7) var = 7;

  aom_clear_system_state();
  return (int)(var);
}

#define DEFAULT_E_MIDPOINT 10.0

static unsigned int haar_ac_energy(MACROBLOCK *x, BLOCK_SIZE bs) {
  int stride = x->plane[0].src.stride;
  uint16_t *buf = x->plane[0].src.buf;
  const int bw = MI_SIZE * mi_size_wide[bs];
  const int bh = MI_SIZE * mi_size_high[bs];

  int var = 0;
  for (int r = 0; r < bh; r += 8)
    for (int c = 0; c < bw; c += 8) {
      var += av1_haar_ac_sad_8x8_uint8_input(buf + c + r * stride, stride);
    }

  return (unsigned int)((uint64_t)var * 256) >> num_pels_log2_lookup[bs];
}

double av1_log_block_wavelet_energy(MACROBLOCK *x, BLOCK_SIZE bs) {
  unsigned int haar_sad = haar_ac_energy(x, bs);
  aom_clear_system_state();
  return log(haar_sad + 1.0);
}

int av1_block_wavelet_energy_level(const AV1_COMP *cpi, MACROBLOCK *x,
                                   BLOCK_SIZE bs) {
  double energy, energy_midpoint;
  aom_clear_system_state();
  (void)cpi;
  energy_midpoint = DEFAULT_E_MIDPOINT;
  energy = av1_log_block_wavelet_energy(x, bs) - energy_midpoint;
  return clamp((int)round(energy), ENERGY_MIN, ENERGY_MAX);
}

int av1_compute_q_from_energy_level_deltaq_mode(const AV1_COMP *const cpi,
                                                int block_var_level) {
  int rate_level;
  const AV1_COMMON *const cm = &cpi->common;

  if (DELTA_Q_PERCEPTUAL_MODULATION == 1) {
    ENERGY_IN_BOUNDS(block_var_level);
    rate_level = SEGMENT_ID(block_var_level);
  } else {
    rate_level = block_var_level;
  }
  const int base_qindex = cm->quant_params.base_qindex;
  int qindex_delta = av1_compute_qdelta_by_rate(
      &cpi->rc, cm->current_frame.frame_type, base_qindex,
      deltaq_rate_ratio[rate_level], cpi->is_screen_content_type,
      cm->seq_params.bit_depth);

  if ((base_qindex != 0) && ((base_qindex + qindex_delta) == 0)) {
    qindex_delta = -base_qindex + 1;
  }
  return base_qindex + qindex_delta;
}