/*
 * Copyright (c) 2021, Alliance for Open Media. All rights reserved
 *
 * This source code is subject to the terms of the BSD 3-Clause Clear License
 * and the Alliance for Open Media Patent License 1.0. If the BSD 3-Clause Clear
 * License was not distributed with this source code in the LICENSE file, you
 * can obtain it at aomedia.org/license/software-license/bsd-3-c-c/.  If the
 * Alliance for Open Media Patent License 1.0 was not distributed with this
 * source code in the PATENTS file, you can obtain it at
 * aomedia.org/license/patent-license/.
 */

#ifndef AVM_AV2_DECODER_DECODER_H_
#define AVM_AV2_DECODER_DECODER_H_

#include "config/avm_config.h"

#include "avm/avm_codec.h"
#include "avm_dsp/bitreader.h"
#include "avm_scale/yv12config.h"
#include "avm_util/avm_thread.h"

#include "av2/common/av2_common_int.h"
#include "av2/common/thread_common.h"
#include "av2/decoder/dthread.h"
#if CONFIG_ACCOUNTING
#include "av2/decoder/accounting.h"
#endif
#if CONFIG_INSPECTION
#include "av2/decoder/inspection.h"
#endif

#ifdef __cplusplus
extern "C" {
#endif

/*!
 * \brief Contains coding block data required by the decoder.
 *
 * This includes:
 * - Coding block info that is common between encoder and decoder.
 * - Other coding block info only needed by the decoder.
 * Contrast this with a similar struct MACROBLOCK on encoder side.
 * This data is also common between ThreadData and AV2Decoder structs.
 */
typedef struct DecoderCodingBlock {
  /*!
   * Coding block info that is common between encoder and decoder.
   */
  DECLARE_ALIGNED(32, MACROBLOCKD, xd);
  /*!
   * True if the at least one of the coding blocks decoded was corrupted.
   */
  int corrupted;
  /*!
   * Pointer to 'mc_buf' inside 'pbi->td' (single-threaded decoding) or
   * 'pbi->thread_data[i].td' (multi-threaded decoding).
   */
  uint16_t *mc_buf[2];
  /*!
   * Pointer to 'dqcoeff' inside 'td->cb_buffer_base' or 'pbi->cb_buffer_base'
   * with appropriate offset for the current superblock, for each plane.
   */
  tran_low_t *dqcoeff_block[MAX_MB_PLANE];
#if CONFIG_INSPECTION
  // dqcoeff_block gets clobbered before the inspect callback happens, so keep a
  // copy here.
  tran_low_t *dqcoeff_block_copy[MAX_MB_PLANE];
  tran_low_t *qcoeff_block[MAX_MB_PLANE];
  tran_low_t *dequant_values[MAX_MB_PLANE];
#endif
  /*!
   * cb_offset[p] is the offset into the dqcoeff_block[p] for the current coding
   * block, for each plane 'p'.
   */
  uint32_t cb_offset[MAX_MB_PLANE];
  /*!
   * Pointer to 'eob_data' inside 'td->cb_buffer_base' or 'pbi->cb_buffer_base'
   * with appropriate offset for the current superblock, for each plane.
   */
  eob_info *eob_data[MAX_MB_PLANE];
  /*!
   * Pointer to 'bob_data' inside 'td->cb_buffer_base' or 'pbi->cb_buffer_base'
   * with appropriate offset for the current superblock, for each plane.
   */
  eob_info *bob_data[MAX_MB_PLANE];
  /*!
   * txb_offset[p] is the offset into the eob_data[p] for the current coding
   * block, for each plane 'p'.
   */
  uint16_t txb_offset[MAX_MB_PLANE];
  /*!
   * ref_mv_count[i] specifies the number of number of motion vector candidates
   * in xd->ref_mv_stack[i].
   */
  uint8_t ref_mv_count[MODE_CTX_REF_FRAMES];
} DecoderCodingBlock;

/*!\cond */

typedef void (*decode_block_visitor_fn_t)(const AV2_COMMON *const cm,
                                          DecoderCodingBlock *dcb,
                                          avm_reader *const r, const int plane,
                                          const int row, const int col,
                                          const TX_SIZE tx_size);

typedef void (*predict_inter_block_visitor_fn_t)(AV2_COMMON *const cm,
                                                 DecoderCodingBlock *dcb,
                                                 BLOCK_SIZE bsize);

typedef struct ThreadData {
  DecoderCodingBlock dcb;

  // Coding block buffer for the current superblock.
  // Used only for single-threaded decoding and multi-threaded decoding with
  // row_mt == 1 cases.
  // See also: similar buffer in 'AV2Decoder'.
  CB_BUFFER cb_buffer_base;

  avm_reader *bit_reader;

  // Motion compensation buffer used to get a prediction buffer with extended
  // borders. One buffer for each of the two possible references.
  uint16_t *mc_buf[2];
  // Allocated size of 'mc_buf'.
  int32_t mc_buf_size;

  CONV_BUF_TYPE *tmp_conv_dst;
  // Temporary buffers used to store the OPFL MV offsets.
  int *opfl_vxy_bufs;
  // Temporary buffers used to store the OPFL gradient information.
  int16_t *opfl_gxy_bufs;
  // Temporary buffers used to store intermediate prediction data calculated
  // during the OPFL/DMVR.
  uint16_t *opfl_dst_bufs;

  decode_block_visitor_fn_t read_coeffs_tx_intra_block_visit;
  decode_block_visitor_fn_t predict_and_recon_intra_block_visit;
  decode_block_visitor_fn_t read_coeffs_tx_inter_block_visit;
  decode_block_visitor_fn_t inverse_cctx_block_visit;
  decode_block_visitor_fn_t inverse_tx_inter_block_visit;
  predict_inter_block_visitor_fn_t predict_inter_block_visit;
  predict_inter_block_visitor_fn_t copy_frame_mvs_block_visit;

  REF_MV_BANK ref_mv_bank;
  WARP_PARAM_BANK warp_param_bank;
} ThreadData;

typedef struct AV2DecRowMTJobInfo {
  int tile_row;
  int tile_col;
  int mi_row;
} AV2DecRowMTJobInfo;

typedef struct AV2DecRowMTSyncData {
#if CONFIG_MULTITHREAD
  pthread_mutex_t *mutex_;
  pthread_cond_t *cond_;
#endif
  int allocated_sb_rows;
  int *cur_sb_col;
  int sync_range;
  int mi_rows;
  int mi_cols;
  int mi_rows_parse_done;
  int mi_rows_decode_started;
  int num_threads_working;
} AV2DecRowMTSync;

typedef struct AV2DecRowMTInfo {
  int tile_rows_start;
  int tile_rows_end;
  int tile_cols_start;
  int tile_cols_end;
  int start_tile;
  int end_tile;
  int mi_rows_to_decode;

  // Invariant:
  //   mi_rows_parse_done >= mi_rows_decode_started.
  // mi_rows_parse_done and mi_rows_decode_started are both initialized to 0.
  // mi_rows_parse_done is incremented freely. mi_rows_decode_started may only
  // be incremented to catch up with mi_rows_parse_done but is not allowed to
  // surpass mi_rows_parse_done.
  //
  // When mi_rows_decode_started reaches mi_rows_to_decode, there are no more
  // decode jobs.

  // Indicates the progress of the bit-stream parsing of superblocks.
  // Initialized to 0. Incremented by sb_mi_size when parse sb row is done.
  int mi_rows_parse_done;
  // Indicates the progress of the decoding of superblocks.
  // Initialized to 0. Incremented by sb_mi_size when decode sb row is started.
  int mi_rows_decode_started;
  // Boolean: Initialized to 0 (false). Set to 1 (true) on error to abort
  // decoding.
  int row_mt_exit;
} AV2DecRowMTInfo;

typedef struct TileDataDec {
  TileInfo tile_info;
  avm_reader bit_reader;
  DECLARE_ALIGNED(16, FRAME_CONTEXT, tctx);
  AV2DecRowMTSync dec_row_mt_sync;
} TileDataDec;

typedef struct TileBufferDec {
  const uint8_t *data;
  size_t size;
} TileBufferDec;

typedef struct DataBuffer {
  const uint8_t *data;
  size_t size;
} DataBuffer;

typedef struct TileJobsDec {
  TileBufferDec *tile_buffer;
  TileDataDec *tile_data;
} TileJobsDec;

typedef struct AV2DecTileMTData {
#if CONFIG_MULTITHREAD
  pthread_mutex_t *job_mutex;
#endif
  TileJobsDec *job_queue;
  int jobs_enqueued;
  int jobs_dequeued;
  int alloc_tile_rows;
  int alloc_tile_cols;
} AV2DecTileMT;

/*!
 * \Holds subgop related info.
 */
typedef struct {
  unsigned char disp_frame_idx[MAX_SUBGOP_STATS_SIZE];
  int show_existing_frame[MAX_SUBGOP_STATS_SIZE];
  int immediate_output_picture[MAX_SUBGOP_STATS_SIZE];
  int qindex[MAX_SUBGOP_STATS_SIZE];
  int refresh_frame_flags[MAX_SUBGOP_STATS_SIZE];
  unsigned int ref_frame_map[MAX_SUBGOP_STATS_SIZE][REF_FRAMES];
  unsigned char stat_count;
} SubGOPStatsDec;

#if CONFIG_COLLECT_COMPONENT_TIMING
#include "avm_ports/avm_timer.h"
// Adjust the following to add new components.
enum {
  av2_decode_frame_headers_and_setup_time,
  av2_read_tilegroup_header_time,
  av2_decode_tg_tiles_and_wrapup_time,
  avm_decode_frame_from_obus_time,
  kTimingComponents,
} UENUM1BYTE(TIMING_COMPONENT);

static INLINE char const *get_component_name(int index) {
  switch (index) {
    case av2_decode_frame_headers_and_setup_time:
      return "av2_decode_frame_headers_and_setup_time";
    case av2_decode_tg_tiles_and_wrapup_time:
      return "av2_decode_tg_tiles_and_wrapup_time";
    case avm_decode_frame_from_obus_time:
      return "avm_decode_frame_from_obus_time";

    default: assert(0);
  }
  return "error";
}
#endif

// This structure contains some information of obus to check the order of
// obus is valid.
typedef struct {
  OBU_TYPE obu_type;
  int first_tile_group;
  int immediate_output_picture;
  // Note: if immediate_output_picture = 1, showble_frame = 1
  int showable_frame;
  int display_order_hint;
  int mlayer_id;
  int tlayer_id;
  int xlayer_id;
  int is_vcl;
} obu_info;

typedef struct AV2Decoder {
  DecoderCodingBlock dcb;

  DECLARE_ALIGNED(32, AV2_COMMON, common);

  AVxWorker lf_worker;
  AV2LfSync lf_row_sync;
  AV2CcsoSync ccso_sync;
  AV2LrSync lr_row_sync;
  AV2LrStruct lr_ctxt;
  AV2CdefSync cdef_sync;
  AV2CdefWorkerData *cdef_worker;
  AV2TipSync tip_sync;
  TIPWorkerData *tip_worker_data;
  AVxWorker *tile_workers;
  int num_workers;
  DecWorkerData *thread_data;
  ThreadData td;
  TileDataDec *tile_data;
  int allocated_tiles;

  TileBufferDec tile_buffers[MAX_TILE_ROWS][MAX_TILE_COLS];
  AV2DecTileMT tile_mt_info;

  // Each time the decoder is called, we expect to receive a full temporal unit.
  // This can contain up to one shown frame per spatial layer in the current
  // operating point (note that some layers may be entirely omitted).
  // If the 'output_all_layers' option is true, we save all of these shown
  // frames so that they can be returned to the application. If the
  // 'output_all_layers' option is false, then we only output one image per
  // temporal unit.
  //
  // Note: The saved buffers are released at the start of the next time the
  // application calls avm_codec_decode().
  int output_all_layers;
  RefCntBuffer *output_frames[REF_FRAMES + 1];  // Use only for single layer
  size_t output_frames_offset;                  // Use only for single layer
  size_t num_output_frames;  // How many frames are queued up so far?

  // In order to properly support random-access decoding, we need
  // to behave slightly differently for the very first frame we decode.
  // So we track whether this is the first frame or not.
  int decoding_first_frame;

  int max_threads;
  int inv_tile_order;
  int need_resync;  // wait for key/intra-only frame.
  int reset_decoder_state;

  int tile_size_bytes;
  int tile_col_size_bytes;
#if CONFIG_ACCOUNTING
  int acct_enabled;
  Accounting accounting;
#endif
  int stream_switched;
#if CONFIG_INSPECTION
  // Inspection callback at the end of each frame.
  avm_inspect_cb inspect_cb;
  // Inspection callback at the end of each superblock.
  avm_inspect_cb inspect_sb_cb;
  // Inspection callback when a TIP frame is output.
  avm_inspect_cb inspect_tip_cb;
  void *inspect_ctx;
#endif
  int operating_point;
  int current_operating_point;
  int seen_frame_header;
  // The expected start_tile (tg_start syntax element) of the next tile group.
  int next_start_tile;

  uint32_t uncomp_hdr_size_in_bits;

  DataBuffer obu_size_hdr;
  OBU_TYPE obu_type;
  int tile_count_minus_1;

  // Decoder has 3 modes of operation:
  // (1) Single-threaded decoding.
  // (2) Multi-threaded decoding with each tile decoded in parallel.
  // (3) In addition to (2), each thread decodes 1 superblock row in parallel.
  // row_mt = 1 triggers mode (3) above, while row_mt = 0, will trigger mode (1)
  // or (2) depending on 'max_threads'.
  unsigned int row_mt;

  // Coding block buffer for the current frame.
  // Allocated and used only for multi-threaded decoding with 'row_mt == 0'.
  // See also: similar buffer in 'ThreadData' struct.
  CB_BUFFER *cb_buffer_base;
  // Allocated size of 'cb_buffer_base'. Currently same as the number of
  // superblocks in the coded frame.
  int cb_buffer_alloc_size;

  int allocated_row_mt_sync_rows;

#if CONFIG_MULTITHREAD
  pthread_mutex_t *row_mt_mutex_;
  pthread_cond_t *row_mt_cond_;
#endif

  AV2DecRowMTInfo frame_row_mt_info;
  avm_metadata_array_t *metadata;

  int context_update_tile_id;
  int skip_loop_filter;
  int skip_film_grain;
  int bru_opt_mode;
  int valid_for_referencing[REF_FRAMES];
  int long_term_ids_in_buffer[REF_FRAMES];
  int is_fwd_kf_present;
  int is_arf_frame_present;
  int num_tile_groups;
  avm_s_frame_info sframe_info;
  unsigned int enable_subgop_stats;
  SubGOPStatsDec subgop_stats;
  /*!
   * Indicate if the primary reference frame is signaled.
   */
  int signal_primary_ref_frame;

#if CONFIG_COLLECT_COMPONENT_TIMING
  /*!
   * component_time[] are initialized to zero while decoder starts.
   */
  uint64_t component_time[kTimingComponents];
  struct avm_usec_timer component_timer[kTimingComponents];
  /*!
   * frame_component_time[] are initialized to zero at beginning of each frame.
   */
  uint64_t frame_component_time[kTimingComponents];
#endif

  struct LayerConfigurationRecord lcr_list[MAX_NUM_LCR];
  int lcr_counter;
  struct AtlasSegmentInfo atlas_list[MAX_NUM_ATLAS_SEG_ID];
  int atlas_counter;
  struct OperatingPointSet ops_list[MAX_NUM_OPS_ID];
  int ops_counter;
  /*!
   * active layer configuration record for a coded video sequence
   */
  struct LayerConfigurationRecord *active_lcr;
  /*!
   * active atlas segment for a coded video sequence
   */
  struct AtlasSegmentInfo *active_atlas_segment_info;

  /*!
   * list of sequence headers
   */
  struct SequenceHeader seq_list[MAX_SEQ_NUM];
  /*!
   * counter for sequence headers
   */
  int seq_header_count;
  /*!
   * active sequence header for the frame
   */
  struct SequenceHeader *active_seq;

  struct quantization_matrix_set qm_list[NUM_CUSTOM_QMS];
  // qm_protected[i]==1 indicates quantization_matrix, qm_list[i] is not reset
  // when a new sequence header is activated since it is signalled with the
  // sequence header.
  int qm_protected[NUM_CUSTOM_QMS];

  RefCntBuffer *ref_frame_map_buf[AVM_MAX_NUM_STREAMS][REF_FRAMES];
  int remapped_ref_idx_buf[AVM_MAX_NUM_STREAMS][REF_FRAMES];
  SequenceHeader seq_list_buf[AVM_MAX_NUM_STREAMS][MAX_SEQ_NUM];
  MultiFrameHeader mfh_params_buf[AVM_MAX_NUM_STREAMS][MAX_MFH_NUM];
  /*!
   * Indicates the number of obus signalled before the frame unit
   * including the frame unit (that may consist of multiple tile group obus)
   */
  int num_obus_with_frame_unit;
  /*!
   * list of obus with a frame unit
   * it should be noted that it may be bigger than it should be in the case that
   * this decoder is invoked by the avm encoder
   */
  obu_info *obu_list;
  /*!
   * Used only when the avm encoder invokes test decoder and the avm encoder
   * feeds multiple frame units to avm_codec_decode()
   * test_decoder_frame_unit_offset is increased by number of obus including
   * configuration records, qm and fgm obus and 1 frame unit that may consist of
   * multiple obus
   */
  int test_decoder_frame_unit_offset;
  /*!
   * last_frame_unit contains obu_info of the last frame unit
   * it is used to check the obu order validation
   */
  obu_info last_frame_unit;
  /*!
   * last_hidden_frame_unit contains obu_info of the last displayable frame unit
   * it is used to check the obu order validation
   */
  obu_info last_displayable_frame_unit;
  /*!
   * Indicates if the current data chunk being decoded in avm_codec_decode()
   * includes a random access point, OBU_CLK or OBU_OLK and it is the
   * start of a temporal unit that will require flush the remaining frames.
   */
  int is_random_access_frame_unit;
  /*!
   * Indicates the number of displayable_frame_unit  per layer between layer_id
   * change num_displayable_frame_unit[i] can be maximum 1.   *
   */
  int num_displayable_frame_unit[MAX_NUM_MLAYERS];

  /*!
   * Indicates an OLK is encountered in any layer
   * It is initialized as 0 and set 1 when the first olk is decoded and set 0
   * when the first regular frame or the first CLK after the olk is decoded.
   */
  int olk_encountered;
  /*!
   * Indicates that the current CLK or OLK is accessed as a start of a sequence
   * Once it is set true, It stays true till the next random access point
   * random_accessed is derived to be true when random_access_point_count is
   * equal to random_access_point_index
   */
  bool random_accessed;
  /*!
   * A decoder option to start decoding from the random_access_point_index-th
   * random access point. random_accessed is set to be true when
   * random_access_point_index is equal to random_access_point_count   * when
   * not used, the default value is -1
   */
  int64_t random_access_point_index;
  /*!
   * Counts the number of random access points. It is increased by 1 at the
   * first CLK/OLK of a temporal unit. If a sequence header is not provided,
   * CLK/OLK is not considered as a random access point.
   */
  int64_t random_access_point_count;
  /*!
   * list of film grain model
   */

  struct film_grain_model fgm_list[MAX_FGM_NUM];

  /*!
   * Indicates the presence of obu in the current frame unit data
   * When obus_in_frame_unit_data[mlayer_id][i] is true, OBUs with obu_type = i
   * and obu_mlayer_id=mlayer_id are present in the current frame unit data
   */
  bool obus_in_frame_unit_data[MAX_NUM_MLAYERS][NUM_OBU_TYPES];

  /*!
   * Indicates if the MultiStreamMode is activated.
   */
  int multi_stream_mode;
  /*!
   * Indicates if the MSDO OBU is read.
   */
  int msdo_is_present_in_tu;
} AV2Decoder;

// Returns 0 on success. Sets pbi->common.error.error_code to a nonzero error
// code and returns a nonzero value on failure.
int av2_receive_compressed_data(struct AV2Decoder *pbi, size_t size,
                                const uint8_t **psource);

// Get the frame at a particular index in the output queue
int av2_get_raw_frame(AV2Decoder *pbi, size_t index, YV12_BUFFER_CONFIG **sd,
                      avm_film_grain_t **grain_params);

int av2_get_frame_to_show(struct AV2Decoder *pbi, YV12_BUFFER_CONFIG *frame);

avm_codec_err_t av2_copy_reference_dec(struct AV2Decoder *pbi, int idx,
                                       YV12_BUFFER_CONFIG *sd);

avm_codec_err_t av2_set_reference_dec(AV2_COMMON *cm, int idx,
                                      int use_external_ref,
                                      YV12_BUFFER_CONFIG *sd);
avm_codec_err_t av2_copy_new_frame_dec(AV2_COMMON *cm,
                                       YV12_BUFFER_CONFIG *new_frame,
                                       YV12_BUFFER_CONFIG *sd);

#if CONFIG_PARAKIT_COLLECT_DATA
struct AV2Decoder *av2_decoder_create(BufferPool *const pool, const char *path,
                                      const char *suffix);
#else
struct AV2Decoder *av2_decoder_create(BufferPool *const pool);
#endif

void av2_decoder_remove(struct AV2Decoder *pbi);
void av2_dealloc_dec_jobs(struct AV2DecTileMTData *tile_mt_info);

void av2_dec_row_mt_dealloc(AV2DecRowMTSync *dec_row_mt_sync);

void av2_dec_free_cb_buf(AV2Decoder *pbi);

static INLINE void decrease_ref_count(RefCntBuffer *const buf,
                                      BufferPool *const pool) {
  if (buf != NULL) {
    --buf->ref_count;
    // Reference counts should never become negative. If this assertion fails,
    // there is a bug in our reference count management.
    assert(buf->ref_count >= 0);
    // A worker may only get a free framebuffer index when calling get_free_fb.
    // But the raw frame buffer is not set up until we finish decoding header.
    // So if any error happens during decoding header, frame_bufs[idx] will not
    // have a valid raw frame buffer.
    if (buf->ref_count == 0 && buf->raw_frame_buffer.data) {
      pool->release_fb_cb(pool->cb_priv, &buf->raw_frame_buffer);
      buf->raw_frame_buffer.data = NULL;
      buf->raw_frame_buffer.size = 0;
      buf->raw_frame_buffer.priv = NULL;
    }
  }
}

// Check whether the frame is ready to output or not.
static INLINE bool is_frame_eligible_for_output(RefCntBuffer *const buf) {
  return ((buf != NULL) && !buf->frame_output_done &&
          buf->implicit_output_picture);
}

static INLINE void check_ref_count_status_dec(struct AV2Decoder *pbi) {
  AV2_COMMON *volatile const cm = &pbi->common;
  RefCntBuffer *const frame_bufs = cm->buffer_pool->frame_bufs;
  if (cm->num_streams > 1) return;

  for (int i = 0; i < FRAME_BUFFERS; ++i) {
    int ref_frame_map_cnt = 0, cur_frame_cnt = 0, output_frames_cnt = 0;
    int calculated_ref_count = 0;
    for (int j = 0; j < REF_FRAMES; ++j) {
      if (cm->ref_frame_map[j] && cm->ref_frame_map[j] == &frame_bufs[i])
        ref_frame_map_cnt++;
    }
    if (cm->cur_frame && cm->cur_frame == &frame_bufs[i]) cur_frame_cnt++;
    for (int j = 0; j < (int)pbi->num_output_frames; ++j) {
      if (pbi->output_frames[j] && pbi->output_frames[j] == &frame_bufs[i])
        output_frames_cnt++;
    }
    calculated_ref_count =
        ref_frame_map_cnt + cur_frame_cnt + output_frames_cnt;

    if (frame_bufs[i].ref_count != calculated_ref_count) {
      avm_internal_error(&cm->error, AVM_CODEC_MEM_ERROR,
                         "The ref_count value is not matched on the decoder");
    }
  }
}

avm_codec_err_t flush_remaining_frames(struct AV2Decoder *pbi);

static INLINE int av2_read_uniform(avm_reader *r, int n) {
  const int l = get_unsigned_bits(n);
  const int m = (1 << l) - n;
  const int v = avm_read_literal(r, l - 1, ACCT_INFO("v"));
  assert(l != 0);
  if (v < m)
    return v;
  else
    return (v << 1) - m + avm_read_literal(r, 1, ACCT_INFO());
}

typedef void (*palette_visitor_fn_t)(MACROBLOCKD *const xd, int plane,
                                     avm_reader *r);

void av2_visit_palette(AV2Decoder *const pbi, MACROBLOCKD *const xd,
                       avm_reader *r, palette_visitor_fn_t visit);

typedef void (*block_visitor_fn_t)(AV2Decoder *const pbi, ThreadData *const td,
                                   int mi_row, int mi_col, avm_reader *r,
                                   PARTITION_TYPE partition, BLOCK_SIZE bsize,
                                   PARTITION_TREE *parent, int index);

/*!\endcond */

#if CONFIG_COLLECT_COMPONENT_TIMING
static INLINE void start_timing(AV2Decoder *pbi, int component) {
  avm_usec_timer_start(&pbi->component_timer[component]);
}
static INLINE void end_timing(AV2Decoder *pbi, int component) {
  avm_usec_timer_mark(&pbi->component_timer[component]);
  pbi->frame_component_time[component] +=
      avm_usec_timer_elapsed(&pbi->component_timer[component]);
}

static INLINE char const *get_frame_type_enum(int type) {
  switch (type) {
    case 0: return "KEY_FRAME";
    case 1: return "INTER_FRAME";
    case 2: return "INTRA_ONLY_FRAME";
    case 3: return "S_FRAME";
    default: assert(0);
  }
  return "error";
}
#endif

#ifdef __cplusplus
}  // extern "C"
#endif

#endif  // AVM_AV2_DECODER_DECODER_H_