| /* |
| * Copyright (c) 2021, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 3-Clause Clear License |
| * and the Alliance for Open Media Patent License 1.0. If the BSD 3-Clause Clear |
| * License was not distributed with this source code in the LICENSE file, you |
| * can obtain it at aomedia.org/license/software-license/bsd-3-c-c/. If the |
| * Alliance for Open Media Patent License 1.0 was not distributed with this |
| * source code in the PATENTS file, you can obtain it at |
| * aomedia.org/license/patent-license/. |
| */ |
| |
| #include <assert.h> |
| #include <math.h> |
| #include <string.h> |
| |
| #include "config/aom_scale_rtcd.h" |
| |
| #include "aom/aom_integer.h" |
| #include "av1/common/ccso.h" |
| #include "av1/common/reconinter.h" |
| |
| /* Pad the border of a frame */ |
| #if CONFIG_F054_PIC_BOUNDARY |
| void extend_ccso_border(const YV12_BUFFER_CONFIG *frame, uint16_t *buf, |
| const int d) { |
| #else |
| void extend_ccso_border(uint16_t *buf, const int d, MACROBLOCKD *xd) { |
| #endif // CONFIG_F054_PIC_BOUNDARY |
| #if CONFIG_F054_PIC_BOUNDARY |
| int s = frame->y_width + (CCSO_PADDING_SIZE << 1); |
| int h = frame->y_height; |
| int w = frame->y_width; |
| #else |
| int s = xd->plane[0].dst.width + (CCSO_PADDING_SIZE << 1); |
| int h = xd->plane[0].dst.height; |
| int w = xd->plane[0].dst.width; |
| #endif // CONFIG_F054_PIC_BOUNDARY |
| uint16_t *p = &buf[d * s + d]; |
| for (int y = 0; y < h; y++) { |
| for (int x = 0; x < d; x++) { |
| *(p - d + x) = p[0]; |
| p[w + x] = p[w - 1]; |
| } |
| p += s; |
| } |
| p -= (s + d); |
| for (int y = 0; y < d; y++) { |
| memcpy(p + (y + 1) * s, p, sizeof(uint16_t) * (w + (d << 1))); |
| } |
| p -= ((h - 1) * s); |
| for (int y = 0; y < d; y++) { |
| memcpy(p - (y + 1) * s, p, sizeof(uint16_t) * (w + (d << 1))); |
| } |
| } |
| |
| /* Derive the quantized index, later it can be used for retriving offset values |
| * from the look-up table */ |
| void cal_filter_support(int *rec_luma_idx, const uint16_t *rec_y, |
| const int quant_step_size, const int inv_quant_step, |
| const int *rec_idx, const int edge_clf) { |
| if (edge_clf == 0) { |
| for (int i = 0; i < 2; i++) { |
| int d = rec_y[rec_idx[i]] - rec_y[0]; |
| if (d > quant_step_size) |
| rec_luma_idx[i] = 2; |
| else if (d < inv_quant_step) |
| rec_luma_idx[i] = 0; |
| else |
| rec_luma_idx[i] = 1; |
| } |
| } else { // if (edge_clf == 1) |
| for (int i = 0; i < 2; i++) { |
| int d = rec_y[rec_idx[i]] - rec_y[0]; |
| if (d < inv_quant_step) |
| rec_luma_idx[i] = 0; |
| else |
| rec_luma_idx[i] = 1; |
| } |
| } |
| } |
| |
| /* Derive sample locations for CCSO */ |
| void derive_ccso_sample_pos(int *rec_idx, const int ccso_stride, |
| const uint8_t ext_filter_support) { |
| // Input sample locations for CCSO |
| // 4 2 0 3 5 |
| // 6 1 x 1 6 |
| // 5 3 0 2 4 |
| assert(ext_filter_support < 7); |
| if (ext_filter_support == 0) { |
| rec_idx[0] = -1 * ccso_stride; |
| rec_idx[1] = 1 * ccso_stride; |
| } else if (ext_filter_support == 1) { |
| rec_idx[0] = -1; |
| rec_idx[1] = 1; |
| } else if (ext_filter_support == 4) { |
| rec_idx[0] = -ccso_stride - 2; |
| rec_idx[1] = ccso_stride + 2; |
| } else if (ext_filter_support == 5) { |
| rec_idx[0] = ccso_stride - 2; |
| rec_idx[1] = -ccso_stride + 2; |
| } else if (ext_filter_support == 2) { |
| rec_idx[0] = -1 * ccso_stride - 1; |
| rec_idx[1] = 1 * ccso_stride + 1; |
| } else if (ext_filter_support == 3) { |
| rec_idx[0] = -1 * ccso_stride + 1; |
| rec_idx[1] = 1 * ccso_stride - 1; |
| } else { // ext_filter_support == 6 |
| rec_idx[0] = 2; |
| rec_idx[1] = -2; |
| } |
| } |
| |
| void ccso_filter_block_hbd_wo_buf_c( |
| const uint16_t *src_y, uint16_t *dst_yuv, const int x, const int y, |
| const int pic_width, const int pic_height, int *src_cls, |
| const int8_t *offset_buf, const int src_y_stride, const int dst_stride, |
| const int y_uv_hscale, const int y_uv_vscale, const int thr, |
| const int neg_thr, const int *src_loc, const int max_val, |
| #if CONFIG_CCSO_FU_BUGFIX |
| const int blk_size_x, const int blk_size_y, |
| #else |
| const int blk_size, |
| #endif // CONFIG_CCSO_FU_BUGFIX |
| const bool isSingleBand, const uint8_t shift_bits, const int edge_clf, |
| const uint8_t ccso_bo_only) { |
| #if CONFIG_CCSO_FU_BUGFIX |
| const int y_end = AOMMIN(pic_height - y, blk_size_y); |
| const int x_end = AOMMIN(pic_width - x, blk_size_x); |
| #else |
| const int y_end = AOMMIN(pic_height - y, blk_size); |
| const int x_end = AOMMIN(pic_width - x, blk_size); |
| #endif // CONFIG_CCSO_FU_BUGFIX |
| for (int y_start = 0; y_start < y_end; y_start++) { |
| const int y_pos = y_start; |
| for (int x_start = 0; x_start < x_end; x_start++) { |
| const int x_pos = x + x_start; |
| if (!ccso_bo_only) { |
| cal_filter_support(src_cls, |
| &src_y[(y_pos << y_uv_vscale) * src_y_stride + |
| (x_pos << y_uv_hscale)], |
| thr, neg_thr, src_loc, edge_clf); |
| } else { |
| src_cls[0] = 0; |
| src_cls[1] = 0; |
| } |
| const int band_num = isSingleBand |
| ? 0 |
| : src_y[(y_pos << y_uv_vscale) * src_y_stride + |
| (x_pos << y_uv_hscale)] >> |
| shift_bits; |
| const int lut_idx_ext = (band_num << 4) + (src_cls[0] << 2) + src_cls[1]; |
| const int offset_val = offset_buf[lut_idx_ext]; |
| dst_yuv[y_pos * dst_stride + x_pos] = |
| clamp(offset_val + dst_yuv[y_pos * dst_stride + x_pos], 0, max_val); |
| } |
| } |
| } |
| |
| /* Apply CCSO on luma component when multiple bands are applied */ |
| void ccso_apply_luma_mb_filter(AV1_COMMON *cm, MACROBLOCKD *xd, const int plane, |
| const uint16_t *src_y, uint16_t *dst_yuv, |
| const int dst_stride, |
| #if CCSO_REFACTORING |
| const int proc_unit_log2, |
| #endif // CCSO_REFACTORING |
| const uint16_t thr, const uint8_t filter_sup, |
| const uint8_t max_band_log2, |
| const int edge_clf) { |
| const CommonModeInfoParams *const mi_params = &cm->mi_params; |
| const int ccso_ext_stride = xd->plane[0].dst.width + (CCSO_PADDING_SIZE << 1); |
| const int pic_height = xd->plane[plane].dst.height; |
| const int pic_width = xd->plane[plane].dst.width; |
| const uint8_t shift_bits = cm->seq_params.bit_depth - max_band_log2; |
| const int max_val = (1 << cm->seq_params.bit_depth) - 1; |
| int src_cls[2]; |
| const int neg_thr = thr * -1; |
| int src_loc[2]; |
| derive_ccso_sample_pos(src_loc, ccso_ext_stride, filter_sup); |
| #if CONFIG_CCSO_FU_BUGFIX |
| assert(plane == 0); // function must only be called for plane == 0 |
| const int blk_log2 = CCSO_BLK_SIZE; |
| #else |
| const int blk_log2 = plane > 0 ? CCSO_BLK_SIZE : CCSO_BLK_SIZE + 1; |
| #endif // CONFIG_CCSO_FU_BUGFIX |
| const int blk_size = 1 << blk_log2; |
| src_y += CCSO_PADDING_SIZE * ccso_ext_stride + CCSO_PADDING_SIZE; |
| #if CCSO_REFACTORING |
| int unit_log2 = proc_unit_log2 > blk_log2 ? blk_log2 : proc_unit_log2; |
| const int unit_size = 1 << (unit_log2); |
| #endif // CCSO_REFACTORING |
| for (int y = 0; y < pic_height; y += blk_size) { |
| for (int x = 0; x < pic_width; x += blk_size) { |
| #if CONFIG_CCSO_FU_BUGFIX |
| const int ccso_blk_idx = |
| (blk_size >> MI_SIZE_LOG2) * (y >> blk_log2) * mi_params->mi_stride + |
| (blk_size >> MI_SIZE_LOG2) * (x >> blk_log2); |
| #else |
| const int ccso_blk_idx = |
| (blk_size >> (MI_SIZE_LOG2 - xd->plane[plane].subsampling_y)) * |
| (y >> blk_log2) * mi_params->mi_stride + |
| (blk_size >> (MI_SIZE_LOG2 - xd->plane[plane].subsampling_x)) * |
| (x >> blk_log2); |
| #endif // CONFIG_CCSO_FU_BUGFIX |
| const bool use_ccso = mi_params->mi_grid_base[ccso_blk_idx]->ccso_blk_y; |
| if (!use_ccso) continue; |
| #if CCSO_REFACTORING |
| const uint16_t *src_unit_y = src_y; |
| uint16_t *dst_unit_yuv = dst_yuv; |
| const int y_end = AOMMIN(pic_height - y, blk_size); |
| const int x_end = AOMMIN(pic_width - x, blk_size); |
| for (int unit_y = 0; unit_y < y_end; unit_y += unit_size) { |
| for (int unit_x = 0; unit_x < x_end; unit_x += unit_size) { |
| #if CONFIG_BRU |
| // FPU level skip |
| const int mbmi_idx = |
| get_mi_grid_idx(mi_params, (y + unit_y) >> MI_SIZE_LOG2, |
| (x + unit_x) >> MI_SIZE_LOG2); |
| const int use_ccso_local = |
| mi_params->mi_grid_base[mbmi_idx]->local_ccso_blk_flag; |
| if (!use_ccso_local) { |
| continue; |
| } |
| if (cm->bru.enabled && |
| mi_params->mi_grid_base[mbmi_idx]->sb_active_mode != |
| BRU_ACTIVE_SB) { |
| aom_internal_error( |
| &cm->error, AOM_CODEC_ERROR, |
| "Invalid BRU activity in CCSO: only active SB can be filtered"); |
| return; |
| } |
| #endif // CONFIG_BRU |
| if (cm->ccso_info.ccso_bo_only[plane]) { |
| ccso_filter_block_hbd_wo_buf_c( |
| src_unit_y, dst_unit_yuv, x + unit_x, y + unit_y, pic_width, |
| pic_height, src_cls, cm->ccso_info.filter_offset[plane], |
| ccso_ext_stride, dst_stride, 0, 0, thr, neg_thr, src_loc, |
| max_val, |
| #if CONFIG_CCSO_FU_BUGFIX |
| unit_size, |
| #endif // CONFIG_CCSO_FU_BUGFIX |
| unit_size, false, shift_bits, edge_clf, |
| cm->ccso_info.ccso_bo_only[plane]); |
| } else { |
| ccso_filter_block_hbd_wo_buf( |
| src_unit_y, dst_unit_yuv, x + unit_x, y + unit_y, pic_width, |
| pic_height, src_cls, cm->ccso_info.filter_offset[plane], |
| ccso_ext_stride, dst_stride, 0, 0, thr, neg_thr, src_loc, |
| max_val, |
| #if CONFIG_CCSO_FU_BUGFIX |
| unit_size, |
| #endif // CONFIG_CCSO_FU_BUGFIX |
| unit_size, false, shift_bits, edge_clf, 0); |
| } |
| } |
| dst_unit_yuv += (dst_stride << unit_log2); |
| src_unit_y += (ccso_ext_stride << unit_log2); |
| } |
| #else |
| if (cm->ccso_info.ccso_bo_only[plane]) { |
| ccso_filter_block_hbd_wo_buf_c( |
| src_y, dst_yuv, x, y, pic_width, pic_height, src_cls, |
| cm->ccso_info.filter_offset[plane], ccso_ext_stride, dst_stride, 0, |
| 0, thr, neg_thr, src_loc, max_val, |
| #if CONFIG_CCSO_FU_BUGFIX |
| blk_size, |
| #endif // CONFIG_CCSO_FU_BUGFIX |
| blk_size, false, shift_bits, edge_clf, |
| cm->ccso_info.ccso_bo_only[plane]); |
| } else { |
| ccso_filter_block_hbd_wo_buf( |
| src_y, dst_yuv, x, y, pic_width, pic_height, src_cls, |
| cm->ccso_info.filter_offset[plane], ccso_ext_stride, dst_stride, 0, |
| 0, thr, neg_thr, src_loc, max_val, |
| #if CONFIG_CCSO_FU_BUGFIX |
| blk_size, |
| #endif // CONFIG_CCSO_FU_BUGFIX |
| blk_size, false, shift_bits, edge_clf, 0); |
| } |
| #endif // CCSO_REFACTORING |
| } |
| dst_yuv += (dst_stride << blk_log2); |
| src_y += (ccso_ext_stride << blk_log2); |
| } |
| } |
| |
| /* Apply CCSO on luma component when single band is applied */ |
| void ccso_apply_luma_sb_filter(AV1_COMMON *cm, MACROBLOCKD *xd, const int plane, |
| const uint16_t *src_y, uint16_t *dst_yuv, |
| const int dst_stride, |
| #if CCSO_REFACTORING |
| const int proc_unit_log2, |
| #endif // CCSO_REFACTORING |
| const uint16_t thr, const uint8_t filter_sup, |
| const uint8_t max_band_log2, |
| const int edge_clf) { |
| (void)max_band_log2; |
| const CommonModeInfoParams *const mi_params = &cm->mi_params; |
| const int ccso_ext_stride = xd->plane[0].dst.width + (CCSO_PADDING_SIZE << 1); |
| const int pic_height = xd->plane[plane].dst.height; |
| const int pic_width = xd->plane[plane].dst.width; |
| const uint8_t shift_bits = cm->seq_params.bit_depth; |
| const int max_val = (1 << cm->seq_params.bit_depth) - 1; |
| int src_cls[2]; |
| const int neg_thr = thr * -1; |
| int src_loc[2]; |
| derive_ccso_sample_pos(src_loc, ccso_ext_stride, filter_sup); |
| #if CONFIG_CCSO_FU_BUGFIX |
| assert(plane == 0); // function must only be called for plane == 0 |
| const int blk_log2 = CCSO_BLK_SIZE; |
| #else |
| const int blk_log2 = plane > 0 ? CCSO_BLK_SIZE : CCSO_BLK_SIZE + 1; |
| #endif // CONFIG_CCSO_FU_BUGFIX |
| const int blk_size = 1 << blk_log2; |
| src_y += CCSO_PADDING_SIZE * ccso_ext_stride + CCSO_PADDING_SIZE; |
| #if CCSO_REFACTORING |
| int unit_log2 = proc_unit_log2 > blk_log2 ? blk_log2 : proc_unit_log2; |
| const int unit_size = 1 << (unit_log2); |
| #endif // CCSO_REFACTORING |
| for (int y = 0; y < pic_height; y += blk_size) { |
| for (int x = 0; x < pic_width; x += blk_size) { |
| #if CONFIG_CCSO_FU_BUGFIX |
| const int ccso_blk_idx = |
| (blk_size >> MI_SIZE_LOG2) * (y >> blk_log2) * mi_params->mi_stride + |
| (blk_size >> MI_SIZE_LOG2) * (x >> blk_log2); |
| #else |
| const int ccso_blk_idx = |
| (blk_size >> (MI_SIZE_LOG2 - xd->plane[plane].subsampling_y)) * |
| (y >> blk_log2) * mi_params->mi_stride + |
| (blk_size >> (MI_SIZE_LOG2 - xd->plane[plane].subsampling_x)) * |
| (x >> blk_log2); |
| #endif // CONFIG_CCSO_FU_BUGFIX |
| const bool use_ccso = mi_params->mi_grid_base[ccso_blk_idx]->ccso_blk_y; |
| if (!use_ccso) continue; |
| #if CCSO_REFACTORING |
| const uint16_t *src_unit_y = src_y; |
| uint16_t *dst_unit_yuv = dst_yuv; |
| const int y_end = AOMMIN(pic_height - y, blk_size); |
| const int x_end = AOMMIN(pic_width - x, blk_size); |
| for (int unit_y = 0; unit_y < y_end; unit_y += unit_size) { |
| for (int unit_x = 0; unit_x < x_end; unit_x += unit_size) { |
| #if CONFIG_BRU |
| // FPU level skip |
| const int mbmi_idx = |
| get_mi_grid_idx(mi_params, (y + unit_y) >> MI_SIZE_LOG2, |
| (x + unit_x) >> MI_SIZE_LOG2); |
| const int use_ccso_local = |
| mi_params->mi_grid_base[mbmi_idx]->local_ccso_blk_flag; |
| if (!use_ccso_local) { |
| continue; |
| } |
| if (cm->bru.enabled && |
| mi_params->mi_grid_base[mbmi_idx]->sb_active_mode != |
| BRU_ACTIVE_SB) { |
| aom_internal_error( |
| &cm->error, AOM_CODEC_ERROR, |
| "Invalid BRU activity in CCSO: only active SB can be filtered"); |
| return; |
| } |
| #endif // CONFIG_BRU |
| if (cm->ccso_info.ccso_bo_only[plane]) { |
| ccso_filter_block_hbd_wo_buf_c( |
| src_unit_y, dst_unit_yuv, x + unit_x, y + unit_y, pic_width, |
| pic_height, src_cls, cm->ccso_info.filter_offset[plane], |
| ccso_ext_stride, dst_stride, 0, 0, thr, neg_thr, src_loc, |
| max_val, |
| #if CONFIG_CCSO_FU_BUGFIX |
| unit_size, |
| #endif |
| unit_size, true, shift_bits, edge_clf, |
| cm->ccso_info.ccso_bo_only[plane]); |
| } else { |
| ccso_filter_block_hbd_wo_buf( |
| src_unit_y, dst_unit_yuv, x + unit_x, y + unit_y, pic_width, |
| pic_height, src_cls, cm->ccso_info.filter_offset[plane], |
| ccso_ext_stride, dst_stride, 0, 0, thr, neg_thr, src_loc, |
| max_val, |
| #if CONFIG_CCSO_FU_BUGFIX |
| unit_size, |
| #endif |
| unit_size, true, shift_bits, edge_clf, 0); |
| } |
| } |
| dst_unit_yuv += (dst_stride << unit_log2); |
| src_unit_y += (ccso_ext_stride << unit_log2); |
| } |
| #else |
| if (cm->ccso_info.ccso_bo_only[plane]) { |
| ccso_filter_block_hbd_wo_buf_c( |
| src_y, dst_yuv, x, y, pic_width, pic_height, src_cls, |
| cm->ccso_info.filter_offset[plane], ccso_ext_stride, dst_stride, 0, |
| 0, thr, neg_thr, src_loc, max_val, |
| #if CONFIG_CCSO_FU_BUGFIX |
| blk_size, |
| #endif // CONFIG_CCSO_FU_BUGFIX |
| blk_size, true, shift_bits, edge_clf, |
| cm->ccso_info.ccso_bo_only[plane]); |
| } else { |
| ccso_filter_block_hbd_wo_buf( |
| src_y, dst_yuv, x, y, pic_width, pic_height, src_cls, |
| cm->ccso_info.filter_offset[plane], ccso_ext_stride, dst_stride, 0, |
| 0, thr, neg_thr, src_loc, max_val, |
| #if CONFIG_CCSO_FU_BUGFIX |
| blk_size, |
| #endif // CONFIG_CCSO_FU_BUGFIX |
| blk_size, true, shift_bits, edge_clf, 0); |
| } |
| #endif // CCSO_REFACTORING |
| } |
| dst_yuv += (dst_stride << blk_log2); |
| src_y += (ccso_ext_stride << blk_log2); |
| } |
| } |
| |
| /* Apply CCSO on chroma component when multiple bands are applied */ |
| void ccso_apply_chroma_mb_filter(AV1_COMMON *cm, MACROBLOCKD *xd, |
| const int plane, const uint16_t *src_y, |
| uint16_t *dst_yuv, const int dst_stride, |
| #if CCSO_REFACTORING |
| const int proc_unit_log2, |
| #endif // CCSO_REFACTORING |
| const uint16_t thr, const uint8_t filter_sup, |
| const uint8_t max_band_log2, |
| const int edge_clf) { |
| const CommonModeInfoParams *const mi_params = &cm->mi_params; |
| const int ccso_ext_stride = xd->plane[0].dst.width + (CCSO_PADDING_SIZE << 1); |
| const int pic_height = xd->plane[plane].dst.height; |
| const int pic_width = xd->plane[plane].dst.width; |
| const int y_uv_hscale = xd->plane[plane].subsampling_x; |
| const int y_uv_vscale = xd->plane[plane].subsampling_y; |
| const uint8_t shift_bits = cm->seq_params.bit_depth - max_band_log2; |
| const int max_val = (1 << cm->seq_params.bit_depth) - 1; |
| int src_cls[2]; |
| const int neg_thr = thr * -1; |
| int src_loc[2]; |
| derive_ccso_sample_pos(src_loc, ccso_ext_stride, filter_sup); |
| #if CONFIG_CCSO_FU_BUGFIX |
| assert(plane > 0); // function must only be called for plane > 0 |
| const int blk_size = 1 << CCSO_BLK_SIZE; |
| const int blk_log2_y = CCSO_BLK_SIZE - cm->seq_params.subsampling_y; |
| const int blk_log2_x = CCSO_BLK_SIZE - cm->seq_params.subsampling_x; |
| const int blk_size_y = 1 << blk_log2_y; |
| const int blk_size_x = 1 << blk_log2_x; |
| #else |
| const int blk_log2_y = plane > 0 ? CCSO_BLK_SIZE : CCSO_BLK_SIZE + 1; |
| const int blk_log2_x = blk_log2_y; |
| const int blk_size_y = 1 << blk_log2_y; |
| const int blk_size_x = 1 << blk_log2_y; |
| #endif // CONFIG_CCSO_FU_BUGFIX |
| src_y += CCSO_PADDING_SIZE * ccso_ext_stride + CCSO_PADDING_SIZE; |
| #if CCSO_REFACTORING |
| const int unit_log2_x = |
| proc_unit_log2 > blk_log2_x ? blk_log2_x : proc_unit_log2; |
| const int unit_size_x = 1 << (unit_log2_x); |
| const int unit_log2_y = |
| proc_unit_log2 > blk_log2_y ? blk_log2_y : proc_unit_log2; |
| const int unit_size_y = 1 << (unit_log2_y); |
| #endif // CCSO_REFACTORING |
| for (int y = 0; y < pic_height; y += blk_size_y) { |
| for (int x = 0; x < pic_width; x += blk_size_x) { |
| #if CONFIG_CCSO_FU_BUGFIX |
| const int ccso_blk_idx = (blk_size >> MI_SIZE_LOG2) * (y >> blk_log2_y) * |
| mi_params->mi_stride + |
| (blk_size >> MI_SIZE_LOG2) * (x >> blk_log2_x); |
| #else |
| const int ccso_blk_idx = |
| (blk_size_y >> (MI_SIZE_LOG2 - xd->plane[plane].subsampling_y)) * |
| (y >> blk_log2_y) * mi_params->mi_stride + |
| (blk_size_x >> (MI_SIZE_LOG2 - xd->plane[plane].subsampling_x)) * |
| (x >> blk_log2_y); |
| #endif // CONFIG_CCSO_FU_BUGFIX |
| const bool use_ccso = |
| (plane == 1) ? mi_params->mi_grid_base[ccso_blk_idx]->ccso_blk_u |
| : mi_params->mi_grid_base[ccso_blk_idx]->ccso_blk_v; |
| if (!use_ccso) continue; |
| #if CCSO_REFACTORING |
| const uint16_t *src_unit_y = src_y; |
| uint16_t *dst_unit_yuv = dst_yuv; |
| const int y_end = AOMMIN(pic_height - y, blk_size_y); |
| const int x_end = AOMMIN(pic_width - x, blk_size_x); |
| for (int unit_y = 0; unit_y < y_end; unit_y += unit_size_y) { |
| for (int unit_x = 0; unit_x < x_end; unit_x += unit_size_x) { |
| #if CONFIG_BRU |
| // FPU level skip |
| const int mbmi_idx = get_mi_grid_idx( |
| mi_params, (y + unit_y) >> (MI_SIZE_LOG2 - y_uv_vscale), |
| (x + unit_x) >> (MI_SIZE_LOG2 - y_uv_hscale)); |
| const int use_ccso_local = |
| mi_params->mi_grid_base[mbmi_idx]->local_ccso_blk_flag; |
| if (!use_ccso_local) { |
| continue; |
| } |
| if (cm->bru.enabled && |
| mi_params->mi_grid_base[mbmi_idx]->sb_active_mode != |
| BRU_ACTIVE_SB) { |
| aom_internal_error( |
| &cm->error, AOM_CODEC_ERROR, |
| "Invalid BRU activity in CCSO: only active SB can be filtered"); |
| return; |
| } |
| #endif // CONFIG_BRU |
| if (cm->ccso_info.ccso_bo_only[plane]) { |
| ccso_filter_block_hbd_wo_buf_c( |
| src_unit_y, dst_unit_yuv, x + unit_x, y + unit_y, pic_width, |
| pic_height, src_cls, cm->ccso_info.filter_offset[plane], |
| ccso_ext_stride, dst_stride, y_uv_hscale, y_uv_vscale, thr, |
| neg_thr, src_loc, max_val, |
| #if CONFIG_CCSO_FU_BUGFIX |
| unit_size_x, |
| #endif |
| unit_size_y, false, shift_bits, edge_clf, |
| cm->ccso_info.ccso_bo_only[plane]); |
| } else { |
| ccso_filter_block_hbd_wo_buf( |
| src_unit_y, dst_unit_yuv, x + unit_x, y + unit_y, pic_width, |
| pic_height, src_cls, cm->ccso_info.filter_offset[plane], |
| ccso_ext_stride, dst_stride, y_uv_hscale, y_uv_vscale, thr, |
| neg_thr, src_loc, max_val, |
| #if CONFIG_CCSO_FU_BUGFIX |
| unit_size_x, |
| #endif |
| unit_size_y, false, shift_bits, edge_clf, 0); |
| } |
| } |
| dst_unit_yuv += (dst_stride << unit_log2_y); |
| src_unit_y += (ccso_ext_stride << (unit_log2_y + y_uv_vscale)); |
| } |
| #else |
| if (cm->ccso_info.ccso_bo_only[plane]) { |
| ccso_filter_block_hbd_wo_buf_c( |
| src_y, dst_yuv, x, y, pic_width, pic_height, src_cls, |
| cm->ccso_info.filter_offset[plane], ccso_ext_stride, dst_stride, |
| y_uv_hscale, y_uv_vscale, thr, neg_thr, src_loc, max_val, |
| #if CONFIG_CCSO_FU_BUGFIX |
| blk_size_x, |
| #endif // CONFIG_CCSO_FU_BUGFIX |
| blk_size_y, false, shift_bits, edge_clf, |
| cm->ccso_info.ccso_bo_only[plane]); |
| } else { |
| ccso_filter_block_hbd_wo_buf( |
| src_y, dst_yuv, x, y, pic_width, pic_height, src_cls, |
| cm->ccso_info.filter_offset[plane], ccso_ext_stride, dst_stride, |
| y_uv_hscale, y_uv_vscale, thr, neg_thr, src_loc, max_val, |
| #if CONFIG_CCSO_FU_BUGFIX |
| blk_size_x, |
| #endif // CONFIG_CCSO_FU_BUGFIX |
| blk_size_y, false, shift_bits, edge_clf, 0); |
| } |
| #endif // CCSO_REFACTORING |
| } |
| dst_yuv += (dst_stride << blk_log2_y); |
| src_y += (ccso_ext_stride << (blk_log2_y + y_uv_vscale)); |
| } |
| } |
| |
| /* Apply CCSO on chroma component when single bands is applied */ |
| void ccso_apply_chroma_sb_filter(AV1_COMMON *cm, MACROBLOCKD *xd, |
| const int plane, const uint16_t *src_y, |
| uint16_t *dst_yuv, const int dst_stride, |
| #if CCSO_REFACTORING |
| const int proc_unit_log2, |
| #endif // CCSO_REFACTORING |
| const uint16_t thr, const uint8_t filter_sup, |
| const uint8_t max_band_log2, |
| const int edge_clf) { |
| (void)max_band_log2; |
| const CommonModeInfoParams *const mi_params = &cm->mi_params; |
| const int ccso_ext_stride = xd->plane[0].dst.width + (CCSO_PADDING_SIZE << 1); |
| const int pic_height = xd->plane[plane].dst.height; |
| const int pic_width = xd->plane[plane].dst.width; |
| const uint8_t shift_bits = cm->seq_params.bit_depth; |
| const int y_uv_hscale = xd->plane[plane].subsampling_x; |
| const int y_uv_vscale = xd->plane[plane].subsampling_y; |
| const int max_val = (1 << cm->seq_params.bit_depth) - 1; |
| int src_cls[2]; |
| const int neg_thr = thr * -1; |
| int src_loc[2]; |
| derive_ccso_sample_pos(src_loc, ccso_ext_stride, filter_sup); |
| #if CONFIG_CCSO_FU_BUGFIX |
| assert(plane > 0); // function must only be called for plane > 0 |
| const int blk_size = 1 << CCSO_BLK_SIZE; |
| const int blk_log2_y = CCSO_BLK_SIZE - cm->seq_params.subsampling_y; |
| const int blk_log2_x = CCSO_BLK_SIZE - cm->seq_params.subsampling_x; |
| const int blk_size_y = 1 << blk_log2_y; |
| const int blk_size_x = 1 << blk_log2_x; |
| #else |
| const int blk_log2_y = plane > 0 ? CCSO_BLK_SIZE : CCSO_BLK_SIZE + 1; |
| const int blk_log2_x = blk_log2_y; |
| const int blk_size_y = 1 << blk_log2_y; |
| const int blk_size_x = 1 << blk_log2_y; |
| #endif // CONFIG_CCSO_FU_BUGFIX |
| src_y += CCSO_PADDING_SIZE * ccso_ext_stride + CCSO_PADDING_SIZE; |
| #if CCSO_REFACTORING |
| const int unit_log2_x = |
| proc_unit_log2 > blk_log2_x ? blk_log2_x : proc_unit_log2; |
| const int unit_size_x = 1 << (unit_log2_x); |
| const int unit_log2_y = |
| proc_unit_log2 > blk_log2_y ? blk_log2_y : proc_unit_log2; |
| const int unit_size_y = 1 << (unit_log2_y); |
| #endif // CCSO_REFACTORING |
| for (int y = 0; y < pic_height; y += blk_size_y) { |
| for (int x = 0; x < pic_width; x += blk_size_x) { |
| #if CONFIG_CCSO_FU_BUGFIX |
| const int ccso_blk_idx = (blk_size >> MI_SIZE_LOG2) * (y >> blk_log2_y) * |
| mi_params->mi_stride + |
| (blk_size >> MI_SIZE_LOG2) * (x >> blk_log2_x); |
| #else |
| const int ccso_blk_idx = |
| (blk_size_y >> (MI_SIZE_LOG2 - xd->plane[plane].subsampling_y)) * |
| (y >> blk_log2_y) * mi_params->mi_stride + |
| (blk_size_x >> (MI_SIZE_LOG2 - xd->plane[plane].subsampling_x)) * |
| (x >> blk_log2_y); |
| #endif // CONFIG_CCSO_FU_BUGFIX |
| const bool use_ccso = |
| (plane == 1) ? mi_params->mi_grid_base[ccso_blk_idx]->ccso_blk_u |
| : mi_params->mi_grid_base[ccso_blk_idx]->ccso_blk_v; |
| if (!use_ccso) continue; |
| #if CCSO_REFACTORING |
| const uint16_t *src_unit_y = src_y; |
| uint16_t *dst_unit_yuv = dst_yuv; |
| const int y_end = AOMMIN(pic_height - y, blk_size_y); |
| const int x_end = AOMMIN(pic_width - x, blk_size_x); |
| for (int unit_y = 0; unit_y < y_end; unit_y += unit_size_y) { |
| for (int unit_x = 0; unit_x < x_end; unit_x += unit_size_x) { |
| #if CONFIG_BRU |
| // FPU level skip |
| const int mbmi_idx = get_mi_grid_idx( |
| mi_params, (y + unit_y) >> (MI_SIZE_LOG2 - y_uv_vscale), |
| (x + unit_x) >> (MI_SIZE_LOG2 - y_uv_hscale)); |
| const int use_ccso_local = |
| mi_params->mi_grid_base[mbmi_idx]->local_ccso_blk_flag; |
| if (!use_ccso_local) { |
| continue; |
| } |
| if (cm->bru.enabled && |
| mi_params->mi_grid_base[mbmi_idx]->sb_active_mode != |
| BRU_ACTIVE_SB) { |
| aom_internal_error( |
| &cm->error, AOM_CODEC_ERROR, |
| "Invalid BRU activity in CCSO: only active SB can be filtered"); |
| return; |
| } |
| #endif // CONFIG_BRU |
| if (cm->ccso_info.ccso_bo_only[plane]) { |
| ccso_filter_block_hbd_wo_buf_c( |
| src_unit_y, dst_unit_yuv, x + unit_x, y + unit_y, pic_width, |
| pic_height, src_cls, cm->ccso_info.filter_offset[plane], |
| ccso_ext_stride, dst_stride, y_uv_hscale, y_uv_vscale, thr, |
| neg_thr, src_loc, max_val, |
| #if CONFIG_CCSO_FU_BUGFIX |
| unit_size_x, |
| #endif |
| unit_size_y, true, shift_bits, edge_clf, |
| cm->ccso_info.ccso_bo_only[plane]); |
| } else { |
| ccso_filter_block_hbd_wo_buf( |
| src_unit_y, dst_unit_yuv, x + unit_x, y + unit_y, pic_width, |
| pic_height, src_cls, cm->ccso_info.filter_offset[plane], |
| ccso_ext_stride, dst_stride, y_uv_hscale, y_uv_vscale, thr, |
| neg_thr, src_loc, max_val, |
| #if CONFIG_CCSO_FU_BUGFIX |
| unit_size_x, |
| #endif |
| unit_size_y, true, shift_bits, edge_clf, 0); |
| } |
| } |
| dst_unit_yuv += (dst_stride << unit_log2_y); |
| src_unit_y += (ccso_ext_stride << (unit_log2_y + y_uv_vscale)); |
| } |
| #else |
| if (cm->ccso_info.ccso_bo_only[plane]) { |
| ccso_filter_block_hbd_wo_buf_c( |
| src_y, dst_yuv, x, y, pic_width, pic_height, src_cls, |
| cm->ccso_info.filter_offset[plane], ccso_ext_stride, dst_stride, |
| y_uv_hscale, y_uv_vscale, thr, neg_thr, src_loc, max_val, |
| #if CONFIG_CCSO_FU_BUGFIX |
| blk_size_x, |
| #endif // CONFIG_CCSO_FU_BUGFIX |
| blk_size_y, true, shift_bits, edge_clf, |
| cm->ccso_info.ccso_bo_only[plane]); |
| } else { |
| ccso_filter_block_hbd_wo_buf( |
| src_y, dst_yuv, x, y, pic_width, pic_height, src_cls, |
| cm->ccso_info.filter_offset[plane], ccso_ext_stride, dst_stride, |
| y_uv_hscale, y_uv_vscale, thr, neg_thr, src_loc, max_val, |
| #if CONFIG_CCSO_FU_BUGFIX |
| blk_size_x, |
| #endif // CONFIG_CCSO_FU_BUGFIX |
| blk_size_y, true, shift_bits, edge_clf, 0); |
| } |
| #endif // CCSO_REFACTORING |
| } |
| dst_yuv += (dst_stride << blk_log2_y); |
| src_y += (ccso_ext_stride << (blk_log2_y + y_uv_vscale)); |
| } |
| } |
| |
| /* Apply CCSO for one frame */ |
| void ccso_frame(YV12_BUFFER_CONFIG *frame, AV1_COMMON *cm, MACROBLOCKD *xd, |
| uint16_t *ext_rec_y) { |
| const int num_planes = av1_num_planes(cm); |
| av1_setup_dst_planes(xd->plane, frame, 0, 0, 0, num_planes, NULL); |
| |
| const uint16_t quant_sz[4][4] = { { 16, 8, 32, 0 }, |
| { 32, 16, 64, 128 }, |
| { 48, 24, 96, 192 }, |
| { 64, 32, 128, 256 } }; |
| |
| for (int plane = 0; plane < num_planes; plane++) { |
| const int dst_stride = xd->plane[plane].dst.stride; |
| const uint16_t quant_step_size = quant_sz[cm->ccso_info.scale_idx[plane]] |
| [cm->ccso_info.quant_idx[plane]]; |
| if (cm->ccso_info.ccso_enable[plane]) { |
| CCSO_FILTER_FUNC apply_ccso_filter_func = |
| cm->ccso_info.max_band_log2[plane] |
| ? (plane > 0 ? ccso_apply_chroma_mb_filter |
| : ccso_apply_luma_mb_filter) |
| : (plane > 0 ? ccso_apply_chroma_sb_filter |
| : ccso_apply_luma_sb_filter); |
| apply_ccso_filter_func( |
| cm, xd, plane, ext_rec_y, &(xd->plane[plane].dst.buf)[0], dst_stride, |
| #if CCSO_REFACTORING |
| cm->mib_size_log2 - |
| AOMMAX(xd->plane[plane].subsampling_x, |
| xd->plane[plane].subsampling_y) + |
| MI_SIZE_LOG2, |
| #endif // CCSO_REFACTORING |
| quant_step_size, cm->ccso_info.ext_filter_support[plane], |
| cm->ccso_info.max_band_log2[plane], cm->ccso_info.edge_clf[plane]); |
| } |
| } |
| } |
| |
| // This function is to copy ccso filter parameters between frames when |
| // ccso_reuse is true. |
| void av1_copy_ccso_filters(CcsoInfo *to, CcsoInfo *from, int plane, |
| bool frame_level, bool block_level, int sb_count) { |
| if (frame_level) { |
| memcpy(to->filter_offset[plane], from->filter_offset[plane], |
| sizeof(to->filter_offset[plane])); |
| to->quant_idx[plane] = from->quant_idx[plane]; |
| to->ext_filter_support[plane] = from->ext_filter_support[plane]; |
| to->edge_clf[plane] = from->edge_clf[plane]; |
| to->ccso_bo_only[plane] = from->ccso_bo_only[plane]; |
| to->max_band_log2[plane] = from->max_band_log2[plane]; |
| to->scale_idx[plane] = from->scale_idx[plane]; |
| } |
| |
| if (block_level) { |
| if (to->sb_filter_control[plane]) { |
| memcpy(to->sb_filter_control[plane], from->sb_filter_control[plane], |
| sizeof(*from->sb_filter_control[plane]) * sb_count); |
| } |
| } |
| |
| to->ccso_enable[plane] = from->ccso_enable[plane]; |
| } |
