| /* |
| * Copyright (c) 2016, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 2 Clause License and |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License |
| * was not distributed with this source code in the LICENSE file, you can |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open |
| * Media Patent License 1.0 was not distributed with this source code in the |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. |
| */ |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <stdbool.h> |
| #include <memory.h> |
| #include <math.h> |
| #include <assert.h> |
| |
| #include "config/aom_dsp_rtcd.h" |
| |
| #include "av1/encoder/global_motion.h" |
| |
| #include "av1/common/convolve.h" |
| #include "av1/common/warped_motion.h" |
| |
| #include "av1/encoder/segmentation.h" |
| |
| #define MIN_TRANS_THRESH (1 * GM_TRANS_DECODE_FACTOR) |
| |
| // Border over which to compute the global motion |
| #define ERRORADV_BORDER 0 |
| |
| /* clang-format off */ |
| // Error metric used for global motion evaluation. |
| // For 8-bit input, the pixel error used to index this table will always |
| // be between -255 and +255. But for 10- and 12-bit input, we use interpolation |
| // which means that we need to support indices of -256 and +256 as well. |
| // Therefore, the table is offset so that logical index 0 corresponds to |
| // error_measure_lut[256]. |
| const int error_measure_lut[513] = { |
| // pow 0.7 |
| 16384, 16384, 16339, 16294, 16249, 16204, 16158, 16113, |
| 16068, 16022, 15977, 15932, 15886, 15840, 15795, 15749, |
| 15703, 15657, 15612, 15566, 15520, 15474, 15427, 15381, |
| 15335, 15289, 15242, 15196, 15149, 15103, 15056, 15010, |
| 14963, 14916, 14869, 14822, 14775, 14728, 14681, 14634, |
| 14587, 14539, 14492, 14445, 14397, 14350, 14302, 14254, |
| 14206, 14159, 14111, 14063, 14015, 13967, 13918, 13870, |
| 13822, 13773, 13725, 13676, 13628, 13579, 13530, 13481, |
| 13432, 13383, 13334, 13285, 13236, 13187, 13137, 13088, |
| 13038, 12988, 12939, 12889, 12839, 12789, 12739, 12689, |
| 12639, 12588, 12538, 12487, 12437, 12386, 12335, 12285, |
| 12234, 12183, 12132, 12080, 12029, 11978, 11926, 11875, |
| 11823, 11771, 11719, 11667, 11615, 11563, 11511, 11458, |
| 11406, 11353, 11301, 11248, 11195, 11142, 11089, 11036, |
| 10982, 10929, 10875, 10822, 10768, 10714, 10660, 10606, |
| 10552, 10497, 10443, 10388, 10333, 10279, 10224, 10168, |
| 10113, 10058, 10002, 9947, 9891, 9835, 9779, 9723, |
| 9666, 9610, 9553, 9497, 9440, 9383, 9326, 9268, |
| 9211, 9153, 9095, 9037, 8979, 8921, 8862, 8804, |
| 8745, 8686, 8627, 8568, 8508, 8449, 8389, 8329, |
| 8269, 8208, 8148, 8087, 8026, 7965, 7903, 7842, |
| 7780, 7718, 7656, 7593, 7531, 7468, 7405, 7341, |
| 7278, 7214, 7150, 7086, 7021, 6956, 6891, 6826, |
| 6760, 6695, 6628, 6562, 6495, 6428, 6361, 6293, |
| 6225, 6157, 6089, 6020, 5950, 5881, 5811, 5741, |
| 5670, 5599, 5527, 5456, 5383, 5311, 5237, 5164, |
| 5090, 5015, 4941, 4865, 4789, 4713, 4636, 4558, |
| 4480, 4401, 4322, 4242, 4162, 4080, 3998, 3916, |
| 3832, 3748, 3663, 3577, 3490, 3402, 3314, 3224, |
| 3133, 3041, 2948, 2854, 2758, 2661, 2562, 2461, |
| 2359, 2255, 2148, 2040, 1929, 1815, 1698, 1577, |
| 1452, 1323, 1187, 1045, 894, 731, 550, 339, |
| 0, 339, 550, 731, 894, 1045, 1187, 1323, |
| 1452, 1577, 1698, 1815, 1929, 2040, 2148, 2255, |
| 2359, 2461, 2562, 2661, 2758, 2854, 2948, 3041, |
| 3133, 3224, 3314, 3402, 3490, 3577, 3663, 3748, |
| 3832, 3916, 3998, 4080, 4162, 4242, 4322, 4401, |
| 4480, 4558, 4636, 4713, 4789, 4865, 4941, 5015, |
| 5090, 5164, 5237, 5311, 5383, 5456, 5527, 5599, |
| 5670, 5741, 5811, 5881, 5950, 6020, 6089, 6157, |
| 6225, 6293, 6361, 6428, 6495, 6562, 6628, 6695, |
| 6760, 6826, 6891, 6956, 7021, 7086, 7150, 7214, |
| 7278, 7341, 7405, 7468, 7531, 7593, 7656, 7718, |
| 7780, 7842, 7903, 7965, 8026, 8087, 8148, 8208, |
| 8269, 8329, 8389, 8449, 8508, 8568, 8627, 8686, |
| 8745, 8804, 8862, 8921, 8979, 9037, 9095, 9153, |
| 9211, 9268, 9326, 9383, 9440, 9497, 9553, 9610, |
| 9666, 9723, 9779, 9835, 9891, 9947, 10002, 10058, |
| 10113, 10168, 10224, 10279, 10333, 10388, 10443, 10497, |
| 10552, 10606, 10660, 10714, 10768, 10822, 10875, 10929, |
| 10982, 11036, 11089, 11142, 11195, 11248, 11301, 11353, |
| 11406, 11458, 11511, 11563, 11615, 11667, 11719, 11771, |
| 11823, 11875, 11926, 11978, 12029, 12080, 12132, 12183, |
| 12234, 12285, 12335, 12386, 12437, 12487, 12538, 12588, |
| 12639, 12689, 12739, 12789, 12839, 12889, 12939, 12988, |
| 13038, 13088, 13137, 13187, 13236, 13285, 13334, 13383, |
| 13432, 13481, 13530, 13579, 13628, 13676, 13725, 13773, |
| 13822, 13870, 13918, 13967, 14015, 14063, 14111, 14159, |
| 14206, 14254, 14302, 14350, 14397, 14445, 14492, 14539, |
| 14587, 14634, 14681, 14728, 14775, 14822, 14869, 14916, |
| 14963, 15010, 15056, 15103, 15149, 15196, 15242, 15289, |
| 15335, 15381, 15427, 15474, 15520, 15566, 15612, 15657, |
| 15703, 15749, 15795, 15840, 15886, 15932, 15977, 16022, |
| 16068, 16113, 16158, 16204, 16249, 16294, 16339, 16384, |
| 16384, |
| }; |
| /* clang-format on */ |
| |
| int av1_is_enough_erroradvantage(double best_erroradvantage, int params_cost) { |
| return best_erroradvantage < erroradv_tr && |
| best_erroradvantage * params_cost < erroradv_prod_tr; |
| } |
| |
| static void convert_to_params(const double *params, int32_t *model) { |
| int i; |
| model[0] = (int32_t)floor(params[0] * (1 << GM_TRANS_PREC_BITS) + 0.5); |
| model[1] = (int32_t)floor(params[1] * (1 << GM_TRANS_PREC_BITS) + 0.5); |
| model[0] = (int32_t)clamp(model[0], GM_TRANS_MIN, GM_TRANS_MAX) * |
| GM_TRANS_DECODE_FACTOR; |
| model[1] = (int32_t)clamp(model[1], GM_TRANS_MIN, GM_TRANS_MAX) * |
| GM_TRANS_DECODE_FACTOR; |
| |
| for (i = 2; i < 6; ++i) { |
| const int diag_value = ((i == 2 || i == 5) ? (1 << GM_ALPHA_PREC_BITS) : 0); |
| model[i] = (int32_t)floor(params[i] * (1 << GM_ALPHA_PREC_BITS) + 0.5); |
| model[i] = |
| (int32_t)clamp(model[i] - diag_value, GM_ALPHA_MIN, GM_ALPHA_MAX); |
| model[i] = (model[i] + diag_value) * GM_ALPHA_DECODE_FACTOR; |
| } |
| } |
| |
| void av1_convert_model_to_params(const double *params, |
| WarpedMotionParams *model) { |
| convert_to_params(params, model->wmmat); |
| model->wmtype = get_wmtype(model); |
| model->invalid = 0; |
| } |
| |
| // Adds some offset to a global motion parameter and handles |
| // all of the necessary precision shifts, clamping, and |
| // zero-centering. |
| static int32_t add_param_offset(int param_index, int32_t param_value, |
| int32_t offset) { |
| const int scale_vals[2] = { GM_TRANS_PREC_DIFF, GM_ALPHA_PREC_DIFF }; |
| const int clamp_vals[2] = { GM_TRANS_MAX, GM_ALPHA_MAX }; |
| // type of param: 0 - translation, 1 - affine |
| const int param_type = (param_index < 2 ? 0 : 1); |
| const int is_one_centered = (param_index == 2 || param_index == 5); |
| |
| // Make parameter zero-centered and offset the shift that was done to make |
| // it compatible with the warped model |
| param_value = (param_value - (is_one_centered << WARPEDMODEL_PREC_BITS)) >> |
| scale_vals[param_type]; |
| // Add desired offset to the rescaled/zero-centered parameter |
| param_value += offset; |
| // Clamp the parameter so it does not overflow the number of bits allotted |
| // to it in the bitstream |
| param_value = (int32_t)clamp(param_value, -clamp_vals[param_type], |
| clamp_vals[param_type]); |
| // Rescale the parameter to WARPEDMODEL_PRECISION_BITS so it is compatible |
| // with the warped motion library |
| param_value *= (1 << scale_vals[param_type]); |
| |
| // Undo the zero-centering step if necessary |
| return param_value + (is_one_centered << WARPEDMODEL_PREC_BITS); |
| } |
| |
| static void force_wmtype(WarpedMotionParams *wm, TransformationType wmtype) { |
| switch (wmtype) { |
| case IDENTITY: |
| wm->wmmat[0] = 0; |
| wm->wmmat[1] = 0; |
| AOM_FALLTHROUGH_INTENDED; |
| case TRANSLATION: |
| wm->wmmat[2] = 1 << WARPEDMODEL_PREC_BITS; |
| wm->wmmat[3] = 0; |
| AOM_FALLTHROUGH_INTENDED; |
| case ROTZOOM: |
| wm->wmmat[4] = -wm->wmmat[3]; |
| wm->wmmat[5] = wm->wmmat[2]; |
| AOM_FALLTHROUGH_INTENDED; |
| case AFFINE: break; |
| default: assert(0); |
| } |
| wm->wmtype = wmtype; |
| } |
| |
| #if CONFIG_AV1_HIGHBITDEPTH |
| static INLINE int generic_sad_highbd(const uint16_t *const ref, int ref_stride, |
| const uint16_t *const dst, int dst_stride, |
| int p_width, int p_height) { |
| // This function should only be called for patches smaller than |
| // WARP_ERROR_BLOCK x WARP_ERROR_BLOCK. This keeps the number of pixels |
| // small enough that we don't need a 64-bit accumulator |
| assert(p_width <= WARP_ERROR_BLOCK && p_height <= WARP_ERROR_BLOCK); |
| |
| int sad = 0; |
| for (int i = 0; i < p_height; ++i) { |
| for (int j = 0; j < p_width; ++j) { |
| sad += abs(dst[j + i * dst_stride] - ref[j + i * ref_stride]); |
| } |
| } |
| return sad; |
| } |
| |
| #if WARP_ERROR_BLOCK != 32 |
| #error "Need to change SAD call size in highbd_segmented_frame_error" |
| #endif // WARP_ERROR_BLOCK != 32 |
| static int64_t highbd_segmented_frame_error( |
| const uint16_t *const ref, int ref_stride, const uint16_t *const dst, |
| int dst_stride, int p_width, int p_height, int bd, uint8_t *segment_map, |
| int segment_map_stride) { |
| (void)bd; |
| int patch_w, patch_h; |
| const int error_bsize_w = AOMMIN(p_width, WARP_ERROR_BLOCK); |
| const int error_bsize_h = AOMMIN(p_height, WARP_ERROR_BLOCK); |
| int64_t sum_error = 0; |
| for (int i = 0; i < p_height; i += WARP_ERROR_BLOCK) { |
| for (int j = 0; j < p_width; j += WARP_ERROR_BLOCK) { |
| int seg_x = j >> WARP_ERROR_BLOCK_LOG; |
| int seg_y = i >> WARP_ERROR_BLOCK_LOG; |
| // Only compute the error if this block contains inliers from the motion |
| // model |
| if (!segment_map[seg_y * segment_map_stride + seg_x]) continue; |
| |
| // avoid computing error into the frame padding |
| patch_w = AOMMIN(error_bsize_w, p_width - j); |
| patch_h = AOMMIN(error_bsize_h, p_height - i); |
| |
| if (patch_w == WARP_ERROR_BLOCK && patch_h == WARP_ERROR_BLOCK) { |
| sum_error += aom_highbd_sad32x32( |
| CONVERT_TO_BYTEPTR(ref + j + i * ref_stride), ref_stride, |
| CONVERT_TO_BYTEPTR(dst + j + i * dst_stride), dst_stride); |
| } else { |
| sum_error += generic_sad_highbd(ref + j + i * ref_stride, ref_stride, |
| dst + j + i * dst_stride, dst_stride, |
| patch_w, patch_h); |
| } |
| } |
| } |
| return sum_error; |
| } |
| |
| #if WARP_ERROR_BLOCK != 32 |
| #error "Need to change SAD call size in highbd_warp_error" |
| #endif // WARP_ERROR_BLOCK != 32 |
| static int64_t highbd_warp_error(WarpedMotionParams *wm, |
| const uint16_t *const ref, int ref_width, |
| int ref_height, int ref_stride, |
| const uint16_t *const dst, int dst_stride, |
| int p_col, int p_row, int p_width, |
| int p_height, int subsampling_x, |
| int subsampling_y, int bd, int64_t best_error, |
| uint8_t *segment_map, int segment_map_stride) { |
| int64_t gm_sumerr = 0; |
| const int error_bsize_w = AOMMIN(p_width, WARP_ERROR_BLOCK); |
| const int error_bsize_h = AOMMIN(p_height, WARP_ERROR_BLOCK); |
| DECLARE_ALIGNED(32, uint16_t, tmp[WARP_ERROR_BLOCK * WARP_ERROR_BLOCK]); |
| |
| ConvolveParams conv_params = get_conv_params(0, 0, bd); |
| conv_params.use_dist_wtd_comp_avg = 0; |
| for (int i = p_row; i < p_row + p_height; i += WARP_ERROR_BLOCK) { |
| for (int j = p_col; j < p_col + p_width; j += WARP_ERROR_BLOCK) { |
| int seg_x = j >> WARP_ERROR_BLOCK_LOG; |
| int seg_y = i >> WARP_ERROR_BLOCK_LOG; |
| // Only compute the error if this block contains inliers from the motion |
| // model |
| if (!segment_map[seg_y * segment_map_stride + seg_x]) continue; |
| // avoid warping extra 8x8 blocks in the padded region of the frame |
| // when p_width and p_height are not multiples of WARP_ERROR_BLOCK |
| const int warp_w = AOMMIN(error_bsize_w, p_col + ref_width - j); |
| const int warp_h = AOMMIN(error_bsize_h, p_row + ref_height - i); |
| highbd_warp_plane(wm, ref, ref_width, ref_height, ref_stride, tmp, j, i, |
| warp_w, warp_h, WARP_ERROR_BLOCK, subsampling_x, |
| subsampling_y, bd, &conv_params); |
| |
| if (warp_w == WARP_ERROR_BLOCK && warp_h == WARP_ERROR_BLOCK) { |
| gm_sumerr += aom_highbd_sad32x32( |
| CONVERT_TO_BYTEPTR(tmp), WARP_ERROR_BLOCK, |
| CONVERT_TO_BYTEPTR(dst + j + i * dst_stride), dst_stride); |
| } else { |
| gm_sumerr += |
| generic_sad_highbd(tmp, WARP_ERROR_BLOCK, dst + j + i * dst_stride, |
| dst_stride, warp_w, warp_h); |
| } |
| |
| if (gm_sumerr > best_error) return INT64_MAX; |
| } |
| } |
| return gm_sumerr; |
| } |
| #endif |
| |
| static INLINE int generic_sad(const uint8_t *const ref, int ref_stride, |
| const uint8_t *const dst, int dst_stride, |
| int p_width, int p_height) { |
| // This function should only be called for patches smaller than |
| // WARP_ERROR_BLOCK x WARP_ERROR_BLOCK. This keeps the number of pixels |
| // small enough that we don't need a 64-bit accumulator |
| assert(p_width <= WARP_ERROR_BLOCK && p_height <= WARP_ERROR_BLOCK); |
| |
| int sad = 0; |
| for (int i = 0; i < p_height; ++i) { |
| for (int j = 0; j < p_width; ++j) { |
| sad += abs(dst[j + i * dst_stride] - ref[j + i * ref_stride]); |
| } |
| } |
| return sad; |
| } |
| |
| #if WARP_ERROR_BLOCK != 32 |
| #error "Need to change SAD call size in segmented_warp_error" |
| #endif // WARP_ERROR_BLOCK != 32 |
| static int64_t segmented_frame_error(const uint8_t *const ref, int ref_stride, |
| const uint8_t *const dst, int dst_stride, |
| int p_width, int p_height, |
| uint8_t *segment_map, |
| int segment_map_stride) { |
| int patch_w, patch_h; |
| const int error_bsize_w = AOMMIN(p_width, WARP_ERROR_BLOCK); |
| const int error_bsize_h = AOMMIN(p_height, WARP_ERROR_BLOCK); |
| int64_t sum_error = 0; |
| for (int i = 0; i < p_height; i += WARP_ERROR_BLOCK) { |
| for (int j = 0; j < p_width; j += WARP_ERROR_BLOCK) { |
| int seg_x = j >> WARP_ERROR_BLOCK_LOG; |
| int seg_y = i >> WARP_ERROR_BLOCK_LOG; |
| // Only compute the error if this block contains inliers from the motion |
| // model |
| if (!segment_map[seg_y * segment_map_stride + seg_x]) continue; |
| |
| // avoid computing error into the frame padding |
| patch_w = AOMMIN(error_bsize_w, p_width - j); |
| patch_h = AOMMIN(error_bsize_h, p_height - i); |
| |
| if (patch_w == WARP_ERROR_BLOCK && patch_h == WARP_ERROR_BLOCK) { |
| sum_error += aom_sad32x32(ref + j + i * ref_stride, ref_stride, |
| dst + j + i * dst_stride, dst_stride); |
| } else { |
| sum_error += |
| generic_sad(ref + j + i * ref_stride, ref_stride, |
| dst + j + i * dst_stride, dst_stride, patch_w, patch_h); |
| } |
| } |
| } |
| return sum_error; |
| } |
| |
| #if WARP_ERROR_BLOCK != 32 |
| #error "Need to change SAD call size in warp_error" |
| #endif // WARP_ERROR_BLOCK != 32 |
| static int64_t warp_error(WarpedMotionParams *wm, const uint8_t *const ref, |
| int ref_width, int ref_height, int ref_stride, |
| const uint8_t *const dst, int dst_stride, int p_col, |
| int p_row, int p_width, int p_height, |
| int subsampling_x, int subsampling_y, |
| int64_t best_error, uint8_t *segment_map, |
| int segment_map_stride) { |
| int64_t gm_sumerr = 0; |
| int warp_w, warp_h; |
| const int error_bsize_w = AOMMIN(p_width, WARP_ERROR_BLOCK); |
| const int error_bsize_h = AOMMIN(p_height, WARP_ERROR_BLOCK); |
| DECLARE_ALIGNED(16, uint8_t, tmp[WARP_ERROR_BLOCK * WARP_ERROR_BLOCK]); |
| ConvolveParams conv_params = get_conv_params(0, 0, 8); |
| conv_params.use_dist_wtd_comp_avg = 0; |
| |
| for (int i = p_row; i < p_row + p_height; i += WARP_ERROR_BLOCK) { |
| for (int j = p_col; j < p_col + p_width; j += WARP_ERROR_BLOCK) { |
| int seg_x = j >> WARP_ERROR_BLOCK_LOG; |
| int seg_y = i >> WARP_ERROR_BLOCK_LOG; |
| // Only compute the error if this block contains inliers from the motion |
| // model |
| if (!segment_map[seg_y * segment_map_stride + seg_x]) continue; |
| // avoid warping extra 8x8 blocks in the padded region of the frame |
| // when p_width and p_height are not multiples of WARP_ERROR_BLOCK |
| warp_w = AOMMIN(error_bsize_w, p_col + ref_width - j); |
| warp_h = AOMMIN(error_bsize_h, p_row + ref_height - i); |
| warp_plane(wm, ref, ref_width, ref_height, ref_stride, tmp, j, i, warp_w, |
| warp_h, WARP_ERROR_BLOCK, subsampling_x, subsampling_y, |
| &conv_params); |
| |
| if (warp_w == WARP_ERROR_BLOCK && warp_h == WARP_ERROR_BLOCK) { |
| gm_sumerr += aom_sad32x32(tmp, WARP_ERROR_BLOCK, |
| dst + j + i * dst_stride, dst_stride); |
| } else { |
| gm_sumerr += |
| generic_sad(tmp, WARP_ERROR_BLOCK, dst + j + i * dst_stride, |
| dst_stride, warp_w, warp_h); |
| } |
| |
| if (gm_sumerr > best_error) return INT64_MAX; |
| } |
| } |
| return gm_sumerr; |
| } |
| |
| int64_t av1_segmented_frame_error(int use_hbd, int bd, const uint8_t *ref, |
| int ref_stride, uint8_t *dst, int dst_stride, |
| int p_width, int p_height, |
| uint8_t *segment_map, |
| int segment_map_stride) { |
| #if CONFIG_AV1_HIGHBITDEPTH |
| if (use_hbd) { |
| return highbd_segmented_frame_error( |
| CONVERT_TO_SHORTPTR(ref), ref_stride, CONVERT_TO_SHORTPTR(dst), |
| dst_stride, p_width, p_height, bd, segment_map, segment_map_stride); |
| } |
| #endif |
| (void)use_hbd; |
| (void)bd; |
| return segmented_frame_error(ref, ref_stride, dst, dst_stride, p_width, |
| p_height, segment_map, segment_map_stride); |
| } |
| |
| int64_t av1_warp_error(WarpedMotionParams *wm, int use_hbd, int bd, |
| const uint8_t *ref, int ref_width, int ref_height, |
| int ref_stride, uint8_t *dst, int dst_stride, int p_col, |
| int p_row, int p_width, int p_height, int subsampling_x, |
| int subsampling_y, int64_t best_error, |
| uint8_t *segment_map, int segment_map_stride) { |
| if (!av1_get_shear_params(wm)) return INT64_MAX; |
| #if CONFIG_AV1_HIGHBITDEPTH |
| if (use_hbd) |
| return highbd_warp_error(wm, CONVERT_TO_SHORTPTR(ref), ref_width, |
| ref_height, ref_stride, CONVERT_TO_SHORTPTR(dst), |
| dst_stride, p_col, p_row, p_width, p_height, |
| subsampling_x, subsampling_y, bd, best_error, |
| segment_map, segment_map_stride); |
| #endif |
| (void)use_hbd; |
| (void)bd; |
| return warp_error(wm, ref, ref_width, ref_height, ref_stride, dst, dst_stride, |
| p_col, p_row, p_width, p_height, subsampling_x, |
| subsampling_y, best_error, segment_map, segment_map_stride); |
| } |
| |
| int64_t av1_refine_integerized_param( |
| WarpedMotionParams *wm, TransformationType wmtype, int use_hbd, int bd, |
| uint8_t *ref, int r_width, int r_height, int r_stride, uint8_t *dst, |
| int d_width, int d_height, int d_stride, int n_refinements, |
| int64_t ref_frame_error, uint8_t *segment_map, int segment_map_stride) { |
| static const int max_trans_model_params[TRANS_TYPES] = { 0, 2, 4, 6 }; |
| const int border = ERRORADV_BORDER; |
| int i = 0, p; |
| int n_params = max_trans_model_params[wmtype]; |
| int32_t *param_mat = wm->wmmat; |
| int64_t step_error, best_error; |
| int32_t step; |
| int32_t *param; |
| int32_t curr_param; |
| int32_t best_param; |
| |
| force_wmtype(wm, wmtype); |
| wm->wmtype = get_wmtype(wm); |
| |
| if (n_refinements == 0) { |
| // Compute the maximum error value that will be accepted, so that |
| // av1_warp_error can terminate early if it proves the model will not |
| // be accepted. |
| int64_t selection_threshold = (int64_t)lrint(ref_frame_error * erroradv_tr); |
| return av1_warp_error(wm, use_hbd, bd, ref, r_width, r_height, r_stride, |
| dst + border * d_stride + border, d_stride, border, |
| border, d_width - 2 * border, d_height - 2 * border, |
| 0, 0, selection_threshold, segment_map, |
| segment_map_stride); |
| } |
| |
| // When refining, use a slightly higher threshold for the initial error |
| // calculation - see comment above erroradv_early_tr for why. |
| int64_t selection_threshold = |
| (int64_t)lrint(ref_frame_error * erroradv_early_tr); |
| best_error = |
| av1_warp_error(wm, use_hbd, bd, ref, r_width, r_height, r_stride, |
| dst + border * d_stride + border, d_stride, border, border, |
| d_width - 2 * border, d_height - 2 * border, 0, 0, |
| selection_threshold, segment_map, segment_map_stride); |
| |
| if (best_error > selection_threshold) { |
| return INT64_MAX; |
| } |
| |
| step = 1 << (n_refinements - 1); |
| for (i = 0; i < n_refinements; i++, step >>= 1) { |
| for (p = 0; p < n_params; ++p) { |
| int step_dir = 0; |
| param = param_mat + p; |
| curr_param = *param; |
| best_param = curr_param; |
| // look to the left |
| // Note: We have to use force_wmtype() to keep the proper symmetry for |
| // ROTZOOM type models |
| *param = add_param_offset(p, curr_param, -step); |
| force_wmtype(wm, wmtype); |
| step_error = |
| av1_warp_error(wm, use_hbd, bd, ref, r_width, r_height, r_stride, |
| dst + border * d_stride + border, d_stride, border, |
| border, d_width - 2 * border, d_height - 2 * border, 0, |
| 0, best_error, segment_map, segment_map_stride); |
| if (step_error < best_error) { |
| best_error = step_error; |
| best_param = *param; |
| step_dir = -1; |
| } |
| |
| // look to the right |
| *param = add_param_offset(p, curr_param, step); |
| force_wmtype(wm, wmtype); |
| step_error = |
| av1_warp_error(wm, use_hbd, bd, ref, r_width, r_height, r_stride, |
| dst + border * d_stride + border, d_stride, border, |
| border, d_width - 2 * border, d_height - 2 * border, 0, |
| 0, best_error, segment_map, segment_map_stride); |
| if (step_error < best_error) { |
| best_error = step_error; |
| best_param = *param; |
| step_dir = 1; |
| } |
| |
| // look to the direction chosen above repeatedly until error increases |
| // for the biggest step size |
| while (step_dir) { |
| *param = add_param_offset(p, best_param, step * step_dir); |
| force_wmtype(wm, wmtype); |
| step_error = |
| av1_warp_error(wm, use_hbd, bd, ref, r_width, r_height, r_stride, |
| dst + border * d_stride + border, d_stride, border, |
| border, d_width - 2 * border, d_height - 2 * border, |
| 0, 0, best_error, segment_map, segment_map_stride); |
| if (step_error < best_error) { |
| best_error = step_error; |
| best_param = *param; |
| } else { |
| step_dir = 0; |
| } |
| } |
| |
| // Restore best parameter value so far |
| *param = best_param; |
| force_wmtype(wm, wmtype); |
| } |
| } |
| |
| wm->wmtype = get_wmtype(wm); |
| return best_error; |
| } |
| |
| #define FEAT_COUNT_TR 3 |
| #define SEG_COUNT_TR 48 |
| void av1_compute_feature_segmentation_map(uint8_t *segment_map, int width, |
| int height, int *inliers, |
| int num_inliers) { |
| int seg_count = 0; |
| memset(segment_map, 0, sizeof(*segment_map) * width * height); |
| |
| for (int i = 0; i < num_inliers; i++) { |
| int x = inliers[i * 2]; |
| int y = inliers[i * 2 + 1]; |
| int seg_x = x >> WARP_ERROR_BLOCK_LOG; |
| int seg_y = y >> WARP_ERROR_BLOCK_LOG; |
| segment_map[seg_y * width + seg_x] += 1; |
| } |
| |
| for (int i = 0; i < height; i++) { |
| for (int j = 0; j < width; j++) { |
| uint8_t feat_count = segment_map[i * width + j]; |
| segment_map[i * width + j] = (feat_count >= FEAT_COUNT_TR); |
| seg_count += (segment_map[i * width + j]); |
| } |
| } |
| |
| // If this motion does not make up a large enough portion of the frame, |
| // use the unsegmented version of the error metric |
| if (seg_count < SEG_COUNT_TR) |
| memset(segment_map, 1, width * height * sizeof(*segment_map)); |
| } |
