| /* |
| * Copyright (c) 2016, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 2 Clause License and |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License |
| * was not distributed with this source code in the LICENSE file, you can |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open |
| * Media Patent License 1.0 was not distributed with this source code in the |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. |
| */ |
| |
| #include <assert.h> |
| #include <stdio.h> |
| #include <limits.h> |
| |
| #include "config/aom_config.h" |
| #include "config/aom_dsp_rtcd.h" |
| #include "config/aom_scale_rtcd.h" |
| |
| #include "aom/aom_integer.h" |
| #include "aom_dsp/blend.h" |
| |
| #include "av1/common/blockd.h" |
| #include "av1/common/mvref_common.h" |
| #include "av1/common/reconinter.h" |
| #include "av1/common/reconintra.h" |
| #include "av1/common/onyxc_int.h" |
| #include "av1/common/obmc.h" |
| #include "av1/encoder/reconinter_enc.h" |
| |
| static INLINE void calc_subpel_params( |
| MACROBLOCKD *xd, const struct scale_factors *const sf, const MV mv, |
| int plane, const int pre_x, const int pre_y, int x, int y, |
| struct buf_2d *const pre_buf, uint8_t **pre, SubpelParams *subpel_params, |
| int bw, int bh) { |
| struct macroblockd_plane *const pd = &xd->plane[plane]; |
| const int is_scaled = av1_is_scaled(sf); |
| if (is_scaled) { |
| int ssx = pd->subsampling_x; |
| int ssy = pd->subsampling_y; |
| int orig_pos_y = (pre_y + y) << SUBPEL_BITS; |
| orig_pos_y += mv.row * (1 << (1 - ssy)); |
| int orig_pos_x = (pre_x + x) << SUBPEL_BITS; |
| orig_pos_x += mv.col * (1 << (1 - ssx)); |
| int pos_y = sf->scale_value_y(orig_pos_y, sf); |
| int pos_x = sf->scale_value_x(orig_pos_x, sf); |
| pos_x += SCALE_EXTRA_OFF; |
| pos_y += SCALE_EXTRA_OFF; |
| |
| const int top = -AOM_LEFT_TOP_MARGIN_SCALED(ssy); |
| const int left = -AOM_LEFT_TOP_MARGIN_SCALED(ssx); |
| const int bottom = (pre_buf->height + AOM_INTERP_EXTEND) |
| << SCALE_SUBPEL_BITS; |
| const int right = (pre_buf->width + AOM_INTERP_EXTEND) << SCALE_SUBPEL_BITS; |
| pos_y = clamp(pos_y, top, bottom); |
| pos_x = clamp(pos_x, left, right); |
| |
| *pre = pre_buf->buf0 + (pos_y >> SCALE_SUBPEL_BITS) * pre_buf->stride + |
| (pos_x >> SCALE_SUBPEL_BITS); |
| subpel_params->subpel_x = pos_x & SCALE_SUBPEL_MASK; |
| subpel_params->subpel_y = pos_y & SCALE_SUBPEL_MASK; |
| subpel_params->xs = sf->x_step_q4; |
| subpel_params->ys = sf->y_step_q4; |
| } else { |
| const MV mv_q4 = clamp_mv_to_umv_border_sb( |
| xd, &mv, bw, bh, pd->subsampling_x, pd->subsampling_y); |
| subpel_params->xs = subpel_params->ys = SCALE_SUBPEL_SHIFTS; |
| subpel_params->subpel_x = (mv_q4.col & SUBPEL_MASK) << SCALE_EXTRA_BITS; |
| subpel_params->subpel_y = (mv_q4.row & SUBPEL_MASK) << SCALE_EXTRA_BITS; |
| *pre = pre_buf->buf + (y + (mv_q4.row >> SUBPEL_BITS)) * pre_buf->stride + |
| (x + (mv_q4.col >> SUBPEL_BITS)); |
| } |
| } |
| |
| static INLINE void build_inter_predictors(const AV1_COMMON *cm, MACROBLOCKD *xd, |
| int plane, const MB_MODE_INFO *mi, |
| int build_for_obmc, int bw, int bh, |
| int mi_x, int mi_y) { |
| struct macroblockd_plane *const pd = &xd->plane[plane]; |
| int is_compound = has_second_ref(mi); |
| int ref; |
| const int is_intrabc = is_intrabc_block(mi); |
| assert(IMPLIES(is_intrabc, !is_compound)); |
| int is_global[2] = { 0, 0 }; |
| for (ref = 0; ref < 1 + is_compound; ++ref) { |
| const WarpedMotionParams *const wm = &xd->global_motion[mi->ref_frame[ref]]; |
| is_global[ref] = is_global_mv_block(mi, wm->wmtype); |
| } |
| |
| const BLOCK_SIZE bsize = mi->sb_type; |
| const int ss_x = pd->subsampling_x; |
| const int ss_y = pd->subsampling_y; |
| int sub8x8_inter = (block_size_wide[bsize] < 8 && ss_x) || |
| (block_size_high[bsize] < 8 && ss_y); |
| |
| if (is_intrabc) sub8x8_inter = 0; |
| |
| // For sub8x8 chroma blocks, we may be covering more than one luma block's |
| // worth of pixels. Thus (mi_x, mi_y) may not be the correct coordinates for |
| // the top-left corner of the prediction source - the correct top-left corner |
| // is at (pre_x, pre_y). |
| const int row_start = |
| (block_size_high[bsize] == 4) && ss_y && !build_for_obmc ? -1 : 0; |
| const int col_start = |
| (block_size_wide[bsize] == 4) && ss_x && !build_for_obmc ? -1 : 0; |
| const int pre_x = (mi_x + MI_SIZE * col_start) >> ss_x; |
| const int pre_y = (mi_y + MI_SIZE * row_start) >> ss_y; |
| |
| sub8x8_inter = sub8x8_inter && !build_for_obmc; |
| if (sub8x8_inter) { |
| for (int row = row_start; row <= 0 && sub8x8_inter; ++row) { |
| for (int col = col_start; col <= 0; ++col) { |
| const MB_MODE_INFO *this_mbmi = xd->mi[row * xd->mi_stride + col]; |
| if (!is_inter_block(this_mbmi)) sub8x8_inter = 0; |
| if (is_intrabc_block(this_mbmi)) sub8x8_inter = 0; |
| } |
| } |
| } |
| |
| if (sub8x8_inter) { |
| // block size |
| const int b4_w = block_size_wide[bsize] >> ss_x; |
| const int b4_h = block_size_high[bsize] >> ss_y; |
| const BLOCK_SIZE plane_bsize = scale_chroma_bsize(bsize, ss_x, ss_y); |
| const int b8_w = block_size_wide[plane_bsize] >> ss_x; |
| const int b8_h = block_size_high[plane_bsize] >> ss_y; |
| assert(!is_compound); |
| |
| const struct buf_2d orig_pred_buf[2] = { pd->pre[0], pd->pre[1] }; |
| |
| int row = row_start; |
| for (int y = 0; y < b8_h; y += b4_h) { |
| int col = col_start; |
| for (int x = 0; x < b8_w; x += b4_w) { |
| MB_MODE_INFO *this_mbmi = xd->mi[row * xd->mi_stride + col]; |
| is_compound = has_second_ref(this_mbmi); |
| int tmp_dst_stride = 8; |
| assert(bw < 8 || bh < 8); |
| ConvolveParams conv_params = get_conv_params_no_round( |
| 0, plane, xd->tmp_conv_dst, tmp_dst_stride, is_compound, xd->bd); |
| conv_params.use_dist_wtd_comp_avg = 0; |
| struct buf_2d *const dst_buf = &pd->dst; |
| uint8_t *dst = dst_buf->buf + dst_buf->stride * y + x; |
| |
| ref = 0; |
| const RefCntBuffer *ref_buf = |
| get_ref_frame_buf(cm, this_mbmi->ref_frame[ref]); |
| const struct scale_factors *ref_scale_factors = |
| get_ref_scale_factors_const(cm, this_mbmi->ref_frame[ref]); |
| |
| pd->pre[ref].buf0 = |
| (plane == 1) ? ref_buf->buf.u_buffer : ref_buf->buf.v_buffer; |
| pd->pre[ref].buf = |
| pd->pre[ref].buf0 + scaled_buffer_offset(pre_x, pre_y, |
| ref_buf->buf.uv_stride, |
| ref_scale_factors); |
| pd->pre[ref].width = ref_buf->buf.uv_crop_width; |
| pd->pre[ref].height = ref_buf->buf.uv_crop_height; |
| pd->pre[ref].stride = ref_buf->buf.uv_stride; |
| |
| const struct scale_factors *const sf = |
| is_intrabc ? &cm->sf_identity : ref_scale_factors; |
| struct buf_2d *const pre_buf = is_intrabc ? dst_buf : &pd->pre[ref]; |
| |
| const MV mv = this_mbmi->mv[ref].as_mv; |
| |
| uint8_t *pre; |
| SubpelParams subpel_params; |
| WarpTypesAllowed warp_types; |
| warp_types.global_warp_allowed = is_global[ref]; |
| warp_types.local_warp_allowed = this_mbmi->motion_mode == WARPED_CAUSAL; |
| |
| calc_subpel_params(xd, sf, mv, plane, pre_x, pre_y, x, y, pre_buf, &pre, |
| &subpel_params, bw, bh); |
| conv_params.do_average = ref; |
| if (is_masked_compound_type(mi->interinter_comp.type)) { |
| // masked compound type has its own average mechanism |
| conv_params.do_average = 0; |
| } |
| |
| av1_make_inter_predictor( |
| pre, pre_buf->stride, dst, dst_buf->stride, &subpel_params, sf, |
| b4_w, b4_h, &conv_params, this_mbmi->interp_filters, &warp_types, |
| (mi_x >> pd->subsampling_x) + x, (mi_y >> pd->subsampling_y) + y, |
| plane, ref, mi, build_for_obmc, xd, cm->allow_warped_motion); |
| |
| ++col; |
| } |
| ++row; |
| } |
| |
| for (ref = 0; ref < 2; ++ref) pd->pre[ref] = orig_pred_buf[ref]; |
| return; |
| } |
| |
| { |
| ConvolveParams conv_params = get_conv_params_no_round( |
| 0, plane, xd->tmp_conv_dst, MAX_SB_SIZE, is_compound, xd->bd); |
| av1_dist_wtd_comp_weight_assign( |
| cm, mi, 0, &conv_params.fwd_offset, &conv_params.bck_offset, |
| &conv_params.use_dist_wtd_comp_avg, is_compound); |
| |
| struct buf_2d *const dst_buf = &pd->dst; |
| uint8_t *const dst = dst_buf->buf; |
| for (ref = 0; ref < 1 + is_compound; ++ref) { |
| const struct scale_factors *const sf = |
| is_intrabc ? &cm->sf_identity : xd->block_ref_scale_factors[ref]; |
| struct buf_2d *const pre_buf = is_intrabc ? dst_buf : &pd->pre[ref]; |
| const MV mv = mi->mv[ref].as_mv; |
| |
| uint8_t *pre; |
| SubpelParams subpel_params; |
| calc_subpel_params(xd, sf, mv, plane, pre_x, pre_y, 0, 0, pre_buf, &pre, |
| &subpel_params, bw, bh); |
| |
| WarpTypesAllowed warp_types; |
| warp_types.global_warp_allowed = is_global[ref]; |
| warp_types.local_warp_allowed = mi->motion_mode == WARPED_CAUSAL; |
| |
| if (ref && is_masked_compound_type(mi->interinter_comp.type)) { |
| // masked compound type has its own average mechanism |
| conv_params.do_average = 0; |
| av1_make_masked_inter_predictor( |
| pre, pre_buf->stride, dst, dst_buf->stride, &subpel_params, sf, bw, |
| bh, &conv_params, mi->interp_filters, plane, &warp_types, |
| mi_x >> pd->subsampling_x, mi_y >> pd->subsampling_y, ref, xd, |
| cm->allow_warped_motion); |
| } else { |
| conv_params.do_average = ref; |
| av1_make_inter_predictor( |
| pre, pre_buf->stride, dst, dst_buf->stride, &subpel_params, sf, bw, |
| bh, &conv_params, mi->interp_filters, &warp_types, |
| mi_x >> pd->subsampling_x, mi_y >> pd->subsampling_y, plane, ref, |
| mi, build_for_obmc, xd, cm->allow_warped_motion); |
| } |
| } |
| } |
| } |
| |
| static void build_inter_predictors_for_plane(const AV1_COMMON *cm, |
| MACROBLOCKD *xd, int mi_row, |
| int mi_col, const BUFFER_SET *ctx, |
| BLOCK_SIZE bsize, int plane_idx) { |
| const struct macroblockd_plane *pd = &xd->plane[plane_idx]; |
| if (!is_chroma_reference(mi_row, mi_col, bsize, pd->subsampling_x, |
| pd->subsampling_y)) |
| return; |
| |
| const int mi_x = mi_col * MI_SIZE; |
| const int mi_y = mi_row * MI_SIZE; |
| build_inter_predictors(cm, xd, plane_idx, xd->mi[0], 0, pd->width, pd->height, |
| mi_x, mi_y); |
| |
| if (is_interintra_pred(xd->mi[0])) { |
| BUFFER_SET default_ctx = { { NULL, NULL, NULL }, { 0, 0, 0 } }; |
| if (!ctx) { |
| default_ctx.plane[plane_idx] = xd->plane[plane_idx].dst.buf; |
| default_ctx.stride[plane_idx] = xd->plane[plane_idx].dst.stride; |
| ctx = &default_ctx; |
| } |
| av1_build_interintra_predictors_sbp(cm, xd, xd->plane[plane_idx].dst.buf, |
| xd->plane[plane_idx].dst.stride, ctx, |
| plane_idx, bsize); |
| } |
| } |
| |
| void av1_enc_build_inter_predictor(const AV1_COMMON *cm, MACROBLOCKD *xd, |
| int mi_row, int mi_col, |
| const BUFFER_SET *ctx, BLOCK_SIZE bsize, |
| int plane_from, int plane_to) { |
| for (int plane_idx = plane_from; plane_idx <= plane_to; ++plane_idx) { |
| build_inter_predictors_for_plane(cm, xd, mi_row, mi_col, ctx, bsize, |
| plane_idx); |
| } |
| } |
| |
| // TODO(sarahparker): |
| // av1_build_inter_predictor should be combined with |
| // av1_make_inter_predictor |
| void av1_build_inter_predictor(const uint8_t *src, int src_stride, uint8_t *dst, |
| int dst_stride, const MV *src_mv, |
| const struct scale_factors *sf, int w, int h, |
| ConvolveParams *conv_params, |
| InterpFilters interp_filters, |
| const WarpTypesAllowed *warp_types, int p_col, |
| int p_row, int plane, int ref, |
| mv_precision precision, int x, int y, |
| const MACROBLOCKD *xd, int can_use_previous) { |
| const int is_q4 = precision == MV_PRECISION_Q4; |
| const MV mv_q4 = { is_q4 ? src_mv->row : src_mv->row * 2, |
| is_q4 ? src_mv->col : src_mv->col * 2 }; |
| MV32 mv = av1_scale_mv(&mv_q4, x, y, sf); |
| mv.col += SCALE_EXTRA_OFF; |
| mv.row += SCALE_EXTRA_OFF; |
| |
| const SubpelParams subpel_params = { sf->x_step_q4, sf->y_step_q4, |
| mv.col & SCALE_SUBPEL_MASK, |
| mv.row & SCALE_SUBPEL_MASK }; |
| src += (mv.row >> SCALE_SUBPEL_BITS) * src_stride + |
| (mv.col >> SCALE_SUBPEL_BITS); |
| |
| av1_make_inter_predictor(src, src_stride, dst, dst_stride, &subpel_params, sf, |
| w, h, conv_params, interp_filters, warp_types, p_col, |
| p_row, plane, ref, xd->mi[0], 0, xd, |
| can_use_previous); |
| } |
| |
| static INLINE void build_prediction_by_above_pred( |
| MACROBLOCKD *xd, int rel_mi_col, uint8_t above_mi_width, |
| MB_MODE_INFO *above_mbmi, void *fun_ctxt, const int num_planes) { |
| struct build_prediction_ctxt *ctxt = (struct build_prediction_ctxt *)fun_ctxt; |
| const int above_mi_col = ctxt->mi_col + rel_mi_col; |
| int mi_x, mi_y; |
| MB_MODE_INFO backup_mbmi = *above_mbmi; |
| |
| av1_setup_build_prediction_by_above_pred(xd, rel_mi_col, above_mi_width, |
| &backup_mbmi, ctxt, num_planes); |
| mi_x = above_mi_col << MI_SIZE_LOG2; |
| mi_y = ctxt->mi_row << MI_SIZE_LOG2; |
| |
| const BLOCK_SIZE bsize = xd->mi[0]->sb_type; |
| |
| for (int j = 0; j < num_planes; ++j) { |
| const struct macroblockd_plane *pd = &xd->plane[j]; |
| int bw = (above_mi_width * MI_SIZE) >> pd->subsampling_x; |
| int bh = clamp(block_size_high[bsize] >> (pd->subsampling_y + 1), 4, |
| block_size_high[BLOCK_64X64] >> (pd->subsampling_y + 1)); |
| |
| if (av1_skip_u4x4_pred_in_obmc(bsize, pd, 0)) continue; |
| build_inter_predictors(ctxt->cm, xd, j, &backup_mbmi, 1, bw, bh, mi_x, |
| mi_y); |
| } |
| } |
| |
| void av1_build_prediction_by_above_preds(const AV1_COMMON *cm, MACROBLOCKD *xd, |
| int mi_row, int mi_col, |
| uint8_t *tmp_buf[MAX_MB_PLANE], |
| int tmp_width[MAX_MB_PLANE], |
| int tmp_height[MAX_MB_PLANE], |
| int tmp_stride[MAX_MB_PLANE]) { |
| if (!xd->up_available) return; |
| |
| // Adjust mb_to_bottom_edge to have the correct value for the OBMC |
| // prediction block. This is half the height of the original block, |
| // except for 128-wide blocks, where we only use a height of 32. |
| int this_height = xd->n4_h * MI_SIZE; |
| int pred_height = AOMMIN(this_height / 2, 32); |
| xd->mb_to_bottom_edge += (this_height - pred_height) * 8; |
| |
| struct build_prediction_ctxt ctxt = { cm, mi_row, |
| mi_col, tmp_buf, |
| tmp_width, tmp_height, |
| tmp_stride, xd->mb_to_right_edge }; |
| BLOCK_SIZE bsize = xd->mi[0]->sb_type; |
| foreach_overlappable_nb_above(cm, xd, mi_col, |
| max_neighbor_obmc[mi_size_wide_log2[bsize]], |
| build_prediction_by_above_pred, &ctxt); |
| |
| xd->mb_to_left_edge = -((mi_col * MI_SIZE) * 8); |
| xd->mb_to_right_edge = ctxt.mb_to_far_edge; |
| xd->mb_to_bottom_edge -= (this_height - pred_height) * 8; |
| } |
| |
| static INLINE void build_prediction_by_left_pred( |
| MACROBLOCKD *xd, int rel_mi_row, uint8_t left_mi_height, |
| MB_MODE_INFO *left_mbmi, void *fun_ctxt, const int num_planes) { |
| struct build_prediction_ctxt *ctxt = (struct build_prediction_ctxt *)fun_ctxt; |
| const int left_mi_row = ctxt->mi_row + rel_mi_row; |
| int mi_x, mi_y; |
| MB_MODE_INFO backup_mbmi = *left_mbmi; |
| |
| av1_setup_build_prediction_by_left_pred(xd, rel_mi_row, left_mi_height, |
| &backup_mbmi, ctxt, num_planes); |
| mi_x = ctxt->mi_col << MI_SIZE_LOG2; |
| mi_y = left_mi_row << MI_SIZE_LOG2; |
| const BLOCK_SIZE bsize = xd->mi[0]->sb_type; |
| |
| for (int j = 0; j < num_planes; ++j) { |
| const struct macroblockd_plane *pd = &xd->plane[j]; |
| int bw = clamp(block_size_wide[bsize] >> (pd->subsampling_x + 1), 4, |
| block_size_wide[BLOCK_64X64] >> (pd->subsampling_x + 1)); |
| int bh = (left_mi_height << MI_SIZE_LOG2) >> pd->subsampling_y; |
| |
| if (av1_skip_u4x4_pred_in_obmc(bsize, pd, 1)) continue; |
| build_inter_predictors(ctxt->cm, xd, j, &backup_mbmi, 1, bw, bh, mi_x, |
| mi_y); |
| } |
| } |
| |
| void av1_build_prediction_by_left_preds(const AV1_COMMON *cm, MACROBLOCKD *xd, |
| int mi_row, int mi_col, |
| uint8_t *tmp_buf[MAX_MB_PLANE], |
| int tmp_width[MAX_MB_PLANE], |
| int tmp_height[MAX_MB_PLANE], |
| int tmp_stride[MAX_MB_PLANE]) { |
| if (!xd->left_available) return; |
| |
| // Adjust mb_to_right_edge to have the correct value for the OBMC |
| // prediction block. This is half the width of the original block, |
| // except for 128-wide blocks, where we only use a width of 32. |
| int this_width = xd->n4_w * MI_SIZE; |
| int pred_width = AOMMIN(this_width / 2, 32); |
| xd->mb_to_right_edge += (this_width - pred_width) * 8; |
| |
| struct build_prediction_ctxt ctxt = { cm, mi_row, |
| mi_col, tmp_buf, |
| tmp_width, tmp_height, |
| tmp_stride, xd->mb_to_bottom_edge }; |
| BLOCK_SIZE bsize = xd->mi[0]->sb_type; |
| foreach_overlappable_nb_left(cm, xd, mi_row, |
| max_neighbor_obmc[mi_size_high_log2[bsize]], |
| build_prediction_by_left_pred, &ctxt); |
| |
| xd->mb_to_top_edge = -((mi_row * MI_SIZE) * 8); |
| xd->mb_to_right_edge -= (this_width - pred_width) * 8; |
| xd->mb_to_bottom_edge = ctxt.mb_to_far_edge; |
| } |
| |
| void av1_build_obmc_inter_predictors_sb(const AV1_COMMON *cm, MACROBLOCKD *xd, |
| int mi_row, int mi_col) { |
| const int num_planes = av1_num_planes(cm); |
| uint8_t *dst_buf1[MAX_MB_PLANE], *dst_buf2[MAX_MB_PLANE]; |
| int dst_stride1[MAX_MB_PLANE] = { MAX_SB_SIZE, MAX_SB_SIZE, MAX_SB_SIZE }; |
| int dst_stride2[MAX_MB_PLANE] = { MAX_SB_SIZE, MAX_SB_SIZE, MAX_SB_SIZE }; |
| int dst_width1[MAX_MB_PLANE] = { MAX_SB_SIZE, MAX_SB_SIZE, MAX_SB_SIZE }; |
| int dst_width2[MAX_MB_PLANE] = { MAX_SB_SIZE, MAX_SB_SIZE, MAX_SB_SIZE }; |
| int dst_height1[MAX_MB_PLANE] = { MAX_SB_SIZE, MAX_SB_SIZE, MAX_SB_SIZE }; |
| int dst_height2[MAX_MB_PLANE] = { MAX_SB_SIZE, MAX_SB_SIZE, MAX_SB_SIZE }; |
| |
| if (is_cur_buf_hbd(xd)) { |
| int len = sizeof(uint16_t); |
| dst_buf1[0] = CONVERT_TO_BYTEPTR(xd->tmp_obmc_bufs[0]); |
| dst_buf1[1] = |
| CONVERT_TO_BYTEPTR(xd->tmp_obmc_bufs[0] + MAX_SB_SQUARE * len); |
| dst_buf1[2] = |
| CONVERT_TO_BYTEPTR(xd->tmp_obmc_bufs[0] + MAX_SB_SQUARE * 2 * len); |
| dst_buf2[0] = CONVERT_TO_BYTEPTR(xd->tmp_obmc_bufs[1]); |
| dst_buf2[1] = |
| CONVERT_TO_BYTEPTR(xd->tmp_obmc_bufs[1] + MAX_SB_SQUARE * len); |
| dst_buf2[2] = |
| CONVERT_TO_BYTEPTR(xd->tmp_obmc_bufs[1] + MAX_SB_SQUARE * 2 * len); |
| } else { |
| dst_buf1[0] = xd->tmp_obmc_bufs[0]; |
| dst_buf1[1] = xd->tmp_obmc_bufs[0] + MAX_SB_SQUARE; |
| dst_buf1[2] = xd->tmp_obmc_bufs[0] + MAX_SB_SQUARE * 2; |
| dst_buf2[0] = xd->tmp_obmc_bufs[1]; |
| dst_buf2[1] = xd->tmp_obmc_bufs[1] + MAX_SB_SQUARE; |
| dst_buf2[2] = xd->tmp_obmc_bufs[1] + MAX_SB_SQUARE * 2; |
| } |
| av1_build_prediction_by_above_preds(cm, xd, mi_row, mi_col, dst_buf1, |
| dst_width1, dst_height1, dst_stride1); |
| av1_build_prediction_by_left_preds(cm, xd, mi_row, mi_col, dst_buf2, |
| dst_width2, dst_height2, dst_stride2); |
| av1_setup_dst_planes(xd->plane, xd->mi[0]->sb_type, &cm->cur_frame->buf, |
| mi_row, mi_col, 0, num_planes); |
| av1_build_obmc_inter_prediction(cm, xd, mi_row, mi_col, dst_buf1, dst_stride1, |
| dst_buf2, dst_stride2); |
| } |
| |
| // Builds the inter-predictor for the single ref case |
| // for use in the encoder to search the wedges efficiently. |
| static void build_inter_predictors_single_buf(MACROBLOCKD *xd, int plane, |
| int bw, int bh, int x, int y, |
| int w, int h, int mi_x, int mi_y, |
| int ref, uint8_t *const ext_dst, |
| int ext_dst_stride, |
| int can_use_previous) { |
| struct macroblockd_plane *const pd = &xd->plane[plane]; |
| const MB_MODE_INFO *mi = xd->mi[0]; |
| |
| const struct scale_factors *const sf = xd->block_ref_scale_factors[ref]; |
| struct buf_2d *const pre_buf = &pd->pre[ref]; |
| uint8_t *const dst = get_buf_by_bd(xd, ext_dst) + ext_dst_stride * y + x; |
| const MV mv = mi->mv[ref].as_mv; |
| |
| ConvolveParams conv_params = get_conv_params(0, plane, xd->bd); |
| WarpTypesAllowed warp_types; |
| const WarpedMotionParams *const wm = &xd->global_motion[mi->ref_frame[ref]]; |
| warp_types.global_warp_allowed = is_global_mv_block(mi, wm->wmtype); |
| warp_types.local_warp_allowed = mi->motion_mode == WARPED_CAUSAL; |
| const int pre_x = (mi_x) >> pd->subsampling_x; |
| const int pre_y = (mi_y) >> pd->subsampling_y; |
| uint8_t *pre; |
| SubpelParams subpel_params; |
| calc_subpel_params(xd, sf, mv, plane, pre_x, pre_y, x, y, pre_buf, &pre, |
| &subpel_params, bw, bh); |
| |
| av1_make_inter_predictor(pre, pre_buf->stride, dst, ext_dst_stride, |
| &subpel_params, sf, w, h, &conv_params, |
| mi->interp_filters, &warp_types, pre_x + x, |
| pre_y + y, plane, ref, mi, 0, xd, can_use_previous); |
| } |
| |
| void av1_build_inter_predictors_for_planes_single_buf( |
| MACROBLOCKD *xd, BLOCK_SIZE bsize, int plane_from, int plane_to, int mi_row, |
| int mi_col, int ref, uint8_t *ext_dst[3], int ext_dst_stride[3], |
| int can_use_previous) { |
| assert(bsize < BLOCK_SIZES_ALL); |
| int plane; |
| const int mi_x = mi_col * MI_SIZE; |
| const int mi_y = mi_row * MI_SIZE; |
| for (plane = plane_from; plane <= plane_to; ++plane) { |
| const BLOCK_SIZE plane_bsize = get_plane_block_size( |
| bsize, xd->plane[plane].subsampling_x, xd->plane[plane].subsampling_y); |
| const int bw = block_size_wide[plane_bsize]; |
| const int bh = block_size_high[plane_bsize]; |
| build_inter_predictors_single_buf(xd, plane, bw, bh, 0, 0, bw, bh, mi_x, |
| mi_y, ref, ext_dst[plane], |
| ext_dst_stride[plane], can_use_previous); |
| } |
| } |
| |
| static void build_masked_compound( |
| uint8_t *dst, int dst_stride, const uint8_t *src0, int src0_stride, |
| const uint8_t *src1, int src1_stride, |
| const INTERINTER_COMPOUND_DATA *const comp_data, BLOCK_SIZE sb_type, int h, |
| int w) { |
| // Derive subsampling from h and w passed in. May be refactored to |
| // pass in subsampling factors directly. |
| const int subh = (2 << mi_size_high_log2[sb_type]) == h; |
| const int subw = (2 << mi_size_wide_log2[sb_type]) == w; |
| const uint8_t *mask = av1_get_compound_type_mask(comp_data, sb_type); |
| aom_blend_a64_mask(dst, dst_stride, src0, src0_stride, src1, src1_stride, |
| mask, block_size_wide[sb_type], w, h, subw, subh); |
| } |
| |
| static void build_masked_compound_highbd( |
| uint8_t *dst_8, int dst_stride, const uint8_t *src0_8, int src0_stride, |
| const uint8_t *src1_8, int src1_stride, |
| const INTERINTER_COMPOUND_DATA *const comp_data, BLOCK_SIZE sb_type, int h, |
| int w, int bd) { |
| // Derive subsampling from h and w passed in. May be refactored to |
| // pass in subsampling factors directly. |
| const int subh = (2 << mi_size_high_log2[sb_type]) == h; |
| const int subw = (2 << mi_size_wide_log2[sb_type]) == w; |
| const uint8_t *mask = av1_get_compound_type_mask(comp_data, sb_type); |
| // const uint8_t *mask = |
| // av1_get_contiguous_soft_mask(wedge_index, wedge_sign, sb_type); |
| aom_highbd_blend_a64_mask(dst_8, dst_stride, src0_8, src0_stride, src1_8, |
| src1_stride, mask, block_size_wide[sb_type], w, h, |
| subw, subh, bd); |
| } |
| |
| static void build_wedge_inter_predictor_from_buf( |
| MACROBLOCKD *xd, int plane, int x, int y, int w, int h, uint8_t *ext_dst0, |
| int ext_dst_stride0, uint8_t *ext_dst1, int ext_dst_stride1) { |
| MB_MODE_INFO *const mbmi = xd->mi[0]; |
| const int is_compound = has_second_ref(mbmi); |
| MACROBLOCKD_PLANE *const pd = &xd->plane[plane]; |
| struct buf_2d *const dst_buf = &pd->dst; |
| uint8_t *const dst = dst_buf->buf + dst_buf->stride * y + x; |
| mbmi->interinter_comp.seg_mask = xd->seg_mask; |
| const INTERINTER_COMPOUND_DATA *comp_data = &mbmi->interinter_comp; |
| const int is_hbd = is_cur_buf_hbd(xd); |
| |
| if (is_compound && is_masked_compound_type(comp_data->type)) { |
| if (!plane && comp_data->type == COMPOUND_DIFFWTD) { |
| if (is_hbd) { |
| av1_build_compound_diffwtd_mask_highbd( |
| comp_data->seg_mask, comp_data->mask_type, |
| CONVERT_TO_BYTEPTR(ext_dst0), ext_dst_stride0, |
| CONVERT_TO_BYTEPTR(ext_dst1), ext_dst_stride1, h, w, xd->bd); |
| } else { |
| av1_build_compound_diffwtd_mask( |
| comp_data->seg_mask, comp_data->mask_type, ext_dst0, |
| ext_dst_stride0, ext_dst1, ext_dst_stride1, h, w); |
| } |
| } |
| |
| if (is_hbd) { |
| build_masked_compound_highbd( |
| dst, dst_buf->stride, CONVERT_TO_BYTEPTR(ext_dst0), ext_dst_stride0, |
| CONVERT_TO_BYTEPTR(ext_dst1), ext_dst_stride1, comp_data, |
| mbmi->sb_type, h, w, xd->bd); |
| } else { |
| build_masked_compound(dst, dst_buf->stride, ext_dst0, ext_dst_stride0, |
| ext_dst1, ext_dst_stride1, comp_data, mbmi->sb_type, |
| h, w); |
| } |
| } else { |
| if (is_hbd) { |
| aom_highbd_convolve_copy(CONVERT_TO_BYTEPTR(ext_dst0), ext_dst_stride0, |
| dst, dst_buf->stride, NULL, 0, NULL, 0, w, h, |
| xd->bd); |
| } else { |
| aom_convolve_copy(ext_dst0, ext_dst_stride0, dst, dst_buf->stride, NULL, |
| 0, NULL, 0, w, h); |
| } |
| } |
| } |
| |
| void av1_build_wedge_inter_predictor_from_buf(MACROBLOCKD *xd, BLOCK_SIZE bsize, |
| int plane_from, int plane_to, |
| uint8_t *ext_dst0[3], |
| int ext_dst_stride0[3], |
| uint8_t *ext_dst1[3], |
| int ext_dst_stride1[3]) { |
| int plane; |
| assert(bsize < BLOCK_SIZES_ALL); |
| for (plane = plane_from; plane <= plane_to; ++plane) { |
| const BLOCK_SIZE plane_bsize = get_plane_block_size( |
| bsize, xd->plane[plane].subsampling_x, xd->plane[plane].subsampling_y); |
| const int bw = block_size_wide[plane_bsize]; |
| const int bh = block_size_high[plane_bsize]; |
| build_wedge_inter_predictor_from_buf( |
| xd, plane, 0, 0, bw, bh, ext_dst0[plane], ext_dst_stride0[plane], |
| ext_dst1[plane], ext_dst_stride1[plane]); |
| } |
| } |