| /* |
| * Copyright (c) 2016, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 2 Clause License and |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License |
| * was not distributed with this source code in the LICENSE file, you can |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open |
| * Media Patent License 1.0 was not distributed with this source code in the |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. |
| */ |
| |
| #ifndef AOM_AV1_ENCODER_SPEED_FEATURES_H_ |
| #define AOM_AV1_ENCODER_SPEED_FEATURES_H_ |
| |
| #include "av1/common/enums.h" |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| enum { |
| INTRA_ALL = (1 << DC_PRED) | (1 << V_PRED) | (1 << H_PRED) | (1 << D45_PRED) | |
| (1 << D135_PRED) | (1 << D113_PRED) | (1 << D157_PRED) | |
| (1 << D203_PRED) | (1 << D67_PRED) | (1 << SMOOTH_PRED) | |
| (1 << SMOOTH_V_PRED) | (1 << SMOOTH_H_PRED) | (1 << PAETH_PRED), |
| UV_INTRA_ALL = |
| (1 << UV_DC_PRED) | (1 << UV_V_PRED) | (1 << UV_H_PRED) | |
| (1 << UV_D45_PRED) | (1 << UV_D135_PRED) | (1 << UV_D113_PRED) | |
| (1 << UV_D157_PRED) | (1 << UV_D203_PRED) | (1 << UV_D67_PRED) | |
| (1 << UV_SMOOTH_PRED) | (1 << UV_SMOOTH_V_PRED) | |
| (1 << UV_SMOOTH_H_PRED) | (1 << UV_PAETH_PRED) | (1 << UV_CFL_PRED), |
| UV_INTRA_DC = (1 << UV_DC_PRED), |
| UV_INTRA_DC_CFL = (1 << UV_DC_PRED) | (1 << UV_CFL_PRED), |
| UV_INTRA_DC_TM = (1 << UV_DC_PRED) | (1 << UV_PAETH_PRED), |
| UV_INTRA_DC_PAETH_CFL = |
| (1 << UV_DC_PRED) | (1 << UV_PAETH_PRED) | (1 << UV_CFL_PRED), |
| UV_INTRA_DC_H_V = (1 << UV_DC_PRED) | (1 << UV_V_PRED) | (1 << UV_H_PRED), |
| UV_INTRA_DC_H_V_CFL = (1 << UV_DC_PRED) | (1 << UV_V_PRED) | |
| (1 << UV_H_PRED) | (1 << UV_CFL_PRED), |
| UV_INTRA_DC_PAETH_H_V = (1 << UV_DC_PRED) | (1 << UV_PAETH_PRED) | |
| (1 << UV_V_PRED) | (1 << UV_H_PRED), |
| UV_INTRA_DC_PAETH_H_V_CFL = (1 << UV_DC_PRED) | (1 << UV_PAETH_PRED) | |
| (1 << UV_V_PRED) | (1 << UV_H_PRED) | |
| (1 << UV_CFL_PRED), |
| INTRA_DC = (1 << DC_PRED), |
| INTRA_DC_TM = (1 << DC_PRED) | (1 << PAETH_PRED), |
| INTRA_DC_H_V = (1 << DC_PRED) | (1 << V_PRED) | (1 << H_PRED), |
| INTRA_DC_PAETH_H_V = |
| (1 << DC_PRED) | (1 << PAETH_PRED) | (1 << V_PRED) | (1 << H_PRED) |
| }; |
| |
| enum { |
| INTER_ALL = (1 << NEARESTMV) | (1 << NEARMV) | (1 << GLOBALMV) | |
| (1 << NEWMV) | (1 << NEAREST_NEARESTMV) | (1 << NEAR_NEARMV) | |
| (1 << NEW_NEWMV) | (1 << NEAREST_NEWMV) | (1 << NEAR_NEWMV) | |
| (1 << NEW_NEARMV) | (1 << NEW_NEARESTMV) | (1 << GLOBAL_GLOBALMV), |
| INTER_NEAREST_NEAR_ZERO = (1 << NEARESTMV) | (1 << NEARMV) | (1 << GLOBALMV) | |
| (1 << NEAREST_NEARESTMV) | (1 << GLOBAL_GLOBALMV) | |
| (1 << NEAREST_NEWMV) | (1 << NEW_NEARESTMV) | |
| (1 << NEW_NEARMV) | (1 << NEAR_NEWMV) | |
| (1 << NEAR_NEARMV), |
| }; |
| |
| enum { |
| DISABLE_ALL_INTER_SPLIT = (1 << THR_COMP_GA) | (1 << THR_COMP_LA) | |
| (1 << THR_ALTR) | (1 << THR_GOLD) | (1 << THR_LAST), |
| |
| DISABLE_ALL_SPLIT = (1 << THR_INTRA) | DISABLE_ALL_INTER_SPLIT, |
| |
| DISABLE_COMPOUND_SPLIT = (1 << THR_COMP_GA) | (1 << THR_COMP_LA), |
| |
| LAST_AND_INTRA_SPLIT_ONLY = (1 << THR_COMP_GA) | (1 << THR_COMP_LA) | |
| (1 << THR_ALTR) | (1 << THR_GOLD) |
| }; |
| |
| enum { |
| TXFM_CODING_SF = 1, |
| INTER_PRED_SF = 2, |
| INTRA_PRED_SF = 4, |
| PARTITION_SF = 8, |
| LOOP_FILTER_SF = 16, |
| RD_SKIP_SF = 32, |
| RESERVE_2_SF = 64, |
| RESERVE_3_SF = 128, |
| } UENUM1BYTE(DEV_SPEED_FEATURES); |
| |
| enum { |
| DIAMOND = 0, |
| NSTEP = 1, |
| HEX = 2, |
| BIGDIA = 3, |
| SQUARE = 4, |
| FAST_HEX = 5, |
| FAST_DIAMOND = 6 |
| } UENUM1BYTE(SEARCH_METHODS); |
| |
| enum { |
| // No recode. |
| DISALLOW_RECODE = 0, |
| // Allow recode for KF and exceeding maximum frame bandwidth. |
| ALLOW_RECODE_KFMAXBW = 1, |
| // Allow recode only for KF/ARF/GF frames. |
| ALLOW_RECODE_KFARFGF = 2, |
| // Allow recode for all frames based on bitrate constraints. |
| ALLOW_RECODE = 3, |
| } UENUM1BYTE(RECODE_LOOP_TYPE); |
| |
| enum { |
| SUBPEL_TREE = 0, |
| SUBPEL_TREE_PRUNED = 1, // Prunes 1/2-pel searches |
| SUBPEL_TREE_PRUNED_MORE = 2, // Prunes 1/2-pel searches more aggressively |
| SUBPEL_TREE_PRUNED_EVENMORE = 3, // Prunes 1/2- and 1/4-pel searches |
| // Other methods to come |
| } UENUM1BYTE(SUBPEL_SEARCH_METHODS); |
| |
| enum { |
| USE_FULL_RD = 0, |
| USE_FAST_RD, |
| USE_LARGESTALL, |
| } UENUM1BYTE(TX_SIZE_SEARCH_METHOD); |
| |
| enum { |
| // Try the full image with different values. |
| LPF_PICK_FROM_FULL_IMAGE, |
| // Try a small portion of the image with different values. |
| LPF_PICK_FROM_SUBIMAGE, |
| // Estimate the level based on quantizer and frame type |
| LPF_PICK_FROM_Q, |
| // Pick 0 to disable LPF if LPF was enabled last frame |
| LPF_PICK_MINIMAL_LPF |
| } UENUM1BYTE(LPF_PICK_METHOD); |
| |
| enum { |
| CDEF_FULL_SEARCH, |
| CDEF_FAST_SEARCH, // Search among a subset of all possible filters. |
| CDEF_PICK_FROM_Q // Estimate filter strength based on quantizer. |
| } UENUM1BYTE(CDEF_PICK_METHOD); |
| |
| enum { |
| // Terminate search early based on distortion so far compared to |
| // qp step, distortion in the neighborhood of the frame, etc. |
| FLAG_EARLY_TERMINATE = 1 << 0, |
| |
| // Skips comp inter modes if the best so far is an intra mode. |
| FLAG_SKIP_COMP_BESTINTRA = 1 << 1, |
| |
| // Skips oblique intra modes if the best so far is an inter mode. |
| FLAG_SKIP_INTRA_BESTINTER = 1 << 3, |
| |
| // Skips oblique intra modes at angles 27, 63, 117, 153 if the best |
| // intra so far is not one of the neighboring directions. |
| FLAG_SKIP_INTRA_DIRMISMATCH = 1 << 4, |
| |
| // Skips intra modes other than DC_PRED if the source variance is small |
| FLAG_SKIP_INTRA_LOWVAR = 1 << 5, |
| } UENUM1BYTE(MODE_SEARCH_SKIP_LOGIC); |
| |
| enum { |
| NO_PRUNE = 0, |
| // adaptively prunes the least perspective tx types out of all 16 |
| // (tuned to provide negligible quality loss) |
| PRUNE_2D_ACCURATE = 1, |
| // similar, but applies much more aggressive pruning to get better speed-up |
| PRUNE_2D_FAST = 2, |
| } UENUM1BYTE(TX_TYPE_PRUNE_MODE); |
| |
| typedef struct { |
| TX_TYPE_PRUNE_MODE prune_mode; |
| int fast_intra_tx_type_search; |
| int fast_inter_tx_type_search; |
| |
| // Use a skip flag prediction model to detect blocks with skip = 1 early |
| // and avoid doing full TX type search for such blocks. |
| int use_skip_flag_prediction; |
| |
| // Threshold used by the ML based method to predict TX block split decisions. |
| int ml_tx_split_thresh; |
| |
| // skip remaining transform type search when we found the rdcost of skip is |
| // better than applying transform |
| int skip_tx_search; |
| } TX_TYPE_SEARCH; |
| |
| enum { |
| // Search partitions using RD criterion |
| SEARCH_PARTITION, |
| |
| // Always use a fixed size partition |
| FIXED_PARTITION, |
| |
| REFERENCE_PARTITION, |
| |
| VAR_BASED_PARTITION |
| } UENUM1BYTE(PARTITION_SEARCH_TYPE); |
| |
| enum { |
| EIGHTH_PEL, |
| QUARTER_PEL, |
| HALF_PEL, |
| FULL_PEL |
| } UENUM1BYTE(SUBPEL_FORCE_STOP); |
| |
| enum { |
| NOT_IN_USE, |
| DIRECT_PRED, |
| RELAXED_PRED, |
| ADAPT_PRED |
| } UENUM1BYTE(MAX_PART_PRED_MODE); |
| |
| typedef struct MV_SPEED_FEATURES { |
| // Motion search method (Diamond, NSTEP, Hex, Big Diamond, Square, etc). |
| SEARCH_METHODS search_method; |
| |
| // This parameter controls which step in the n-step process we start at. |
| // It's changed adaptively based on circumstances. |
| int reduce_first_step_size; |
| |
| // If this is set to 1, we limit the motion search range to 2 times the |
| // largest motion vector found in the last frame. |
| int auto_mv_step_size; |
| |
| // Subpel_search_method can only be subpel_tree which does a subpixel |
| // logarithmic search that keeps stepping at 1/2 pixel units until |
| // you stop getting a gain, and then goes on to 1/4 and repeats |
| // the same process. Along the way it skips many diagonals. |
| SUBPEL_SEARCH_METHODS subpel_search_method; |
| |
| // Maximum number of steps in logarithmic subpel search before giving up. |
| int subpel_iters_per_step; |
| |
| // When to stop subpel search. |
| SUBPEL_FORCE_STOP subpel_force_stop; |
| } MV_SPEED_FEATURES; |
| |
| #define MAX_MESH_STEP 4 |
| |
| typedef struct MESH_PATTERN { |
| int range; |
| int interval; |
| } MESH_PATTERN; |
| |
| enum { |
| GM_FULL_SEARCH, |
| GM_REDUCED_REF_SEARCH_SKIP_L2_L3, |
| GM_REDUCED_REF_SEARCH_SKIP_L2_L3_ARF2, |
| GM_DISABLE_SEARCH |
| } UENUM1BYTE(GM_SEARCH_TYPE); |
| |
| enum { |
| GM_ERRORADV_TR_0, |
| GM_ERRORADV_TR_1, |
| GM_ERRORADV_TR_2, |
| GM_ERRORADV_TR_TYPES, |
| } UENUM1BYTE(GM_ERRORADV_TYPE); |
| |
| enum { |
| NO_TRELLIS_OPT, // No trellis optimization |
| FULL_TRELLIS_OPT, // Trellis optimization in all stages |
| FINAL_PASS_TRELLIS_OPT, // Trellis optimization in only the final encode pass |
| NO_ESTIMATE_YRD_TRELLIS_OPT // Disable trellis in estimate_yrd_for_sb |
| } UENUM1BYTE(TRELLIS_OPT_TYPE); |
| |
| enum { |
| FULL_TXFM_RD, |
| LOW_TXFM_RD, |
| } UENUM1BYTE(TXFM_RD_MODEL); |
| |
| enum { |
| DIST_WTD_COMP_ENABLED, |
| DIST_WTD_COMP_SKIP_MV_SEARCH, |
| DIST_WTD_COMP_DISABLED, |
| } UENUM1BYTE(DIST_WTD_COMP_FLAG); |
| |
| typedef enum { |
| FLAG_SKIP_EIGHTTAP = 1 << EIGHTTAP_REGULAR, |
| FLAG_SKIP_EIGHTTAP_SMOOTH = 1 << EIGHTTAP_SMOOTH, |
| FLAG_SKIP_EIGHTTAP_SHARP = 1 << MULTITAP_SHARP, |
| } INTERP_FILTER_MASK; |
| |
| typedef struct SPEED_FEATURES { |
| MV_SPEED_FEATURES mv; |
| |
| // Frame level coding parameter update |
| int frame_parameter_update; |
| |
| RECODE_LOOP_TYPE recode_loop; |
| |
| // Trellis (dynamic programming) optimization of quantized values |
| TRELLIS_OPT_TYPE optimize_coefficients; |
| |
| // Global motion warp error threshold |
| GM_ERRORADV_TYPE gm_erroradv_type; |
| |
| // Always set to 0. If on it enables 0 cost background transmission |
| // (except for the initial transmission of the segmentation). The feature is |
| // disabled because the addition of very large block sizes make the |
| // backgrounds very to cheap to encode, and the segmentation we have |
| // adds overhead. |
| int static_segmentation; |
| |
| // Limit the inter mode tested in the RD loop |
| int reduce_inter_modes; |
| |
| // Do not compute the global motion parameters for a LAST2_FRAME or |
| // LAST3_FRAME if the GOLDEN_FRAME is closer and it has a non identity |
| // global model. |
| int selective_ref_gm; |
| |
| // If 1 we iterate finding a best reference for 2 ref frames together - via |
| // a log search that iterates 4 times (check around mv for last for best |
| // error of combined predictor then check around mv for alt). If 0 we |
| // we just use the best motion vector found for each frame by itself. |
| BLOCK_SIZE comp_inter_joint_search_thresh; |
| |
| // This variable is used to cap the maximum number of times we skip testing a |
| // mode to be evaluated. A high value means we will be faster. |
| int adaptive_rd_thresh; |
| |
| // Determine which method we use to determine transform size. We can choose |
| // between options like full rd, largest for prediction size, largest |
| // for intra and model coefs for the rest. |
| TX_SIZE_SEARCH_METHOD tx_size_search_method; |
| |
| // Init search depth for square and rectangular transform partitions. |
| // Values: |
| // 0 - search full tree, 1: search 1 level, 2: search the highest level only |
| int inter_tx_size_search_init_depth_sqr; |
| int inter_tx_size_search_init_depth_rect; |
| int intra_tx_size_search_init_depth_sqr; |
| int intra_tx_size_search_init_depth_rect; |
| // If any dimension of a coding block size above 64, always search the |
| // largest transform only, since the largest transform block size is 64x64. |
| int tx_size_search_lgr_block; |
| |
| PARTITION_SEARCH_TYPE partition_search_type; |
| |
| TX_TYPE_SEARCH tx_type_search; |
| |
| // Skip split transform block partition when the collocated bigger block |
| // is selected as all zero coefficients. |
| int txb_split_cap; |
| |
| // Shortcut the transform block partition and type search when the target |
| // rdcost is relatively lower. |
| // Values are 0 (not used) , or 1 - 2 with progressively increasing |
| // aggressiveness |
| int adaptive_txb_search_level; |
| |
| // Prune level for tx_size_type search for inter based on rd model |
| // 0: no pruning |
| // 1-2: progressively increasing aggressiveness of pruning |
| int model_based_prune_tx_search_level; |
| |
| // Model based breakout after interpolation filter search |
| // 0: no breakout |
| // 1: use model based rd breakout |
| int model_based_post_interp_filter_breakout; |
| |
| // Used if partition_search_type = FIXED_SIZE_PARTITION |
| BLOCK_SIZE always_this_block_size; |
| |
| // Drop less likely to be picked reference frames in the RD search. |
| // Has five levels for now: 0, 1, 2, 3 and 4, where higher levels prune more |
| // aggressively than lower ones. (0 means no pruning). |
| int selective_ref_frame; |
| |
| // Prune extended partition types search |
| // Can take values 0 - 2, 0 referring to no pruning, and 1 - 2 increasing |
| // aggressiveness of pruning in order. |
| int prune_ext_partition_types_search_level; |
| |
| // Use a ML model to prune horz and vert partitions |
| int ml_prune_rect_partition; |
| |
| // Disable/Enable interintra motion mode based on stats collected during |
| // first_partition_search_pass |
| int use_first_partition_pass_interintra_stats; |
| |
| // Use a ML model to prune horz_a, horz_b, vert_a and vert_b partitions. |
| int ml_prune_ab_partition; |
| |
| // Use a ML model to prune horz4 and vert4 partitions. |
| int ml_prune_4_partition; |
| |
| // Use a ML model to adaptively terminate partition search after trying |
| // PARTITION_SPLIT. Can take values 0 - 2, 0 meaning not being enabled, and |
| // 1 - 2 increasing aggressiveness in order. |
| int ml_early_term_after_part_split_level; |
| |
| // 2-pass coding block partition search, and also use the mode decisions made |
| // in the initial partition search to prune mode candidates, e.g. ref frames. |
| int two_pass_partition_search; |
| |
| // Terminate early in firstpass of two_pass partition search for faster |
| // firstpass. |
| int firstpass_simple_motion_search_early_term; |
| |
| // Skip rectangular partition test when partition type none gives better |
| // rd than partition type split. Can take values 0 - 2, 0 referring to no |
| // skipping, and 1 - 2 increasing aggressiveness of skipping in order. |
| int less_rectangular_check_level; |
| |
| // Use square partition only beyond this block size. |
| BLOCK_SIZE use_square_partition_only_threshold; |
| |
| // Prune reference frames for rectangular partitions. |
| // 0 implies no pruning |
| // 1 implies prune for extended partition |
| // 2 implies prune horiz, vert and extended partition |
| int prune_ref_frame_for_rect_partitions; |
| |
| // Sets min and max square partition levels for this superblock based on |
| // motion vector and prediction error distribution produced from 16x16 |
| // simple motion search |
| MAX_PART_PRED_MODE auto_max_partition_based_on_simple_motion; |
| int auto_min_partition_based_on_simple_motion; |
| |
| // Ensures the rd based auto partition search will always |
| // go down at least to the specified level. |
| BLOCK_SIZE rd_auto_partition_min_limit; |
| |
| // Min and max partition size we enable (block_size) as per auto |
| // min max, but also used by adjust partitioning, and pick_partitioning. |
| BLOCK_SIZE default_min_partition_size; |
| BLOCK_SIZE default_max_partition_size; |
| |
| // Whether or not we allow partitions one smaller or one greater than the last |
| // frame's partitioning. Only used if use_lastframe_partitioning is set. |
| int adjust_partitioning_from_last_frame; |
| |
| // TODO(jingning): combine the related motion search speed features |
| // This allows us to use motion search at other sizes as a starting |
| // point for this motion search and limits the search range around it. |
| int adaptive_motion_search; |
| |
| // Flag for allowing some use of exhaustive searches; |
| int allow_exhaustive_searches; |
| |
| // Threshold for allowing exhaistive motion search. |
| int exhaustive_searches_thresh; |
| |
| // Maximum number of exhaustive searches for a frame. |
| int max_exaustive_pct; |
| |
| // Pattern to be used for any exhaustive mesh searches. |
| MESH_PATTERN mesh_patterns[MAX_MESH_STEP]; |
| |
| // Allows sub 8x8 modes to use the prediction filter that was determined |
| // best for 8x8 mode. If set to 0 we always re check all the filters for |
| // sizes less than 8x8, 1 means we check all filter modes if no 8x8 filter |
| // was selected, and 2 means we use 8 tap if no 8x8 filter mode was selected. |
| int adaptive_pred_interp_filter; |
| |
| // Adaptive prediction mode search |
| int adaptive_mode_search; |
| |
| int alt_ref_search_fp; |
| |
| // Implements various heuristics to skip searching modes |
| // The heuristics selected are based on flags |
| // defined in the MODE_SEARCH_SKIP_HEURISTICS enum |
| unsigned int mode_search_skip_flags; |
| |
| // A source variance threshold below which filter search is disabled |
| // Choose a very large value (UINT_MAX) to use 8-tap always |
| unsigned int disable_filter_search_var_thresh; |
| |
| // Only enable wedge search if the edge strength is greater than |
| // this threshold. A value of 0 signals that this check is disabled. |
| unsigned int disable_wedge_search_edge_thresh; |
| |
| // Only enable wedge search if the variance is above this threshold. |
| unsigned int disable_wedge_search_var_thresh; |
| |
| // Whether fast wedge sign estimate is used |
| int fast_wedge_sign_estimate; |
| |
| // Whether to prune wedge search based on predictor difference |
| int prune_wedge_pred_diff_based; |
| |
| // These bit masks allow you to enable or disable intra modes for each |
| // transform size separately. |
| int intra_y_mode_mask[TX_SIZES]; |
| int intra_uv_mode_mask[TX_SIZES]; |
| |
| // This feature controls how the loop filter level is determined. |
| LPF_PICK_METHOD lpf_pick; |
| |
| // Control how the CDEF strength is determined. |
| CDEF_PICK_METHOD cdef_pick_method; |
| |
| // This feature controls whether we do the expensive context update and |
| // calculation in the rd coefficient costing loop. |
| int use_fast_coef_costing; |
| |
| // This feature controls the tolerence vs target used in deciding whether to |
| // recode a frame. It has no meaning if recode is disabled. |
| int recode_tolerance; |
| |
| // This variable controls the maximum block size where intra blocks can be |
| // used in inter frames. |
| // TODO(aconverse): Fold this into one of the other many mode skips |
| BLOCK_SIZE max_intra_bsize; |
| |
| // Partition search early breakout thresholds. |
| int64_t partition_search_breakout_dist_thr; |
| int partition_search_breakout_rate_thr; |
| |
| // Thresholds for ML based partition search breakout. |
| int ml_partition_search_breakout_thresh[PARTITION_BLOCK_SIZES]; |
| |
| // Allow skipping partition search for still image frame |
| int allow_partition_search_skip; |
| |
| // Fast approximation of av1_model_rd_from_var_lapndz |
| int simple_model_rd_from_var; |
| |
| // If true, sub-pixel search uses the exact convolve function used for final |
| // encoding and decoding; otherwise, it uses bilinear interpolation. |
| SUBPEL_SEARCH_TYPE use_accurate_subpel_search; |
| |
| // Whether to compute distortion in the image domain (slower but |
| // more accurate), or in the transform domain (faster but less acurate). |
| // 0: use image domain |
| // 1: use transform domain in tx_type search, and use image domain for |
| // RD_STATS |
| // 2: use transform domain |
| int use_transform_domain_distortion; |
| |
| GM_SEARCH_TYPE gm_search_type; |
| |
| // whether to disable the global motion recode loop |
| int gm_disable_recode; |
| |
| // Do limited interpolation filter search for dual filters, since best choice |
| // usually includes EIGHTTAP_REGULAR. |
| int use_fast_interpolation_filter_search; |
| |
| // Disable dual filter |
| int disable_dual_filter; |
| |
| // Save results of interpolation_filter_search for a block |
| // Check mv and ref_frames before search, if they are same with previous |
| // saved results, it can be skipped. |
| int skip_repeat_interpolation_filter_search; |
| |
| // Use a hash table to store previously computed optimized qcoeffs from |
| // expensive calls to optimize_txb. |
| int use_hash_based_trellis; |
| |
| // flag to drop some ref frames in compound motion search |
| int drop_ref; |
| |
| // flag to allow skipping intra mode for inter frame prediction |
| int skip_intra_in_interframe; |
| |
| // Use hash table to store intra(keyframe only) txb transform search results |
| // to avoid repeated search on the same residue signal. |
| int use_intra_txb_hash; |
| |
| // Use hash table to store inter txb transform search results |
| // to avoid repeated search on the same residue signal. |
| int use_inter_txb_hash; |
| |
| // Use hash table to store macroblock RD search results |
| // to avoid repeated search on the same residue signal. |
| int use_mb_rd_hash; |
| |
| // Calculate RD cost before doing optimize_b, and skip if the cost is large. |
| int optimize_b_precheck; |
| |
| // Use two-loop compound search |
| int two_loop_comp_search; |
| |
| // Use model rd instead of transform search in second loop of compound search |
| int second_loop_comp_fast_tx_search; |
| |
| // Decide when and how to use joint_comp. |
| DIST_WTD_COMP_FLAG use_dist_wtd_comp_flag; |
| |
| // Decoder side speed feature to add penalty for use of dual-sgr filters. |
| // Takes values 0 - 10, 0 indicating no penalty and each additional level |
| // adding a penalty of 1% |
| int dual_sgr_penalty_level; |
| |
| // 2-pass inter mode model estimation where the preliminary pass skips |
| // transform search and uses a model to estimate rd, while the final pass |
| // computes the full transform search. Two types of models are supported: |
| // 0: not used |
| // 1: used with online dynamic rd model |
| // 2: used with static rd model |
| int inter_mode_rd_model_estimation; |
| |
| // Skip some ref frames in compound motion search by single motion search |
| // result. Has three levels for now: 0 referring to no skipping, and 1 - 3 |
| // increasing aggressiveness of skipping in order. |
| // Note: The search order might affect the result. It is better to search same |
| // single inter mode as a group. |
| int prune_comp_search_by_single_result; |
| |
| // Skip certain motion modes (OBMC, warped, interintra) for single reference |
| // motion search, using the results of single ref SIMPLE_TRANSLATION |
| int prune_single_motion_modes_by_simple_trans; |
| |
| // Reuse the inter_intra_mode search result from NEARESTMV mode to other |
| // single ref modes |
| int reuse_inter_intra_mode; |
| |
| // Set the full pixel search level of obmc |
| // 0: obmc_full_pixel_diamond |
| // 1: obmc_refining_search_sad (faster) |
| int obmc_full_pixel_search_level; |
| |
| // flag to skip NEWMV mode in drl if the motion search result is the same |
| int skip_repeated_newmv; |
| |
| // Prune intra mode candidates based on source block gradient stats. |
| int intra_angle_estimation; |
| |
| // Skip obmc or warped motion mode when neighborhood motion field is |
| // identical |
| int skip_obmc_in_uniform_mv_field; |
| int skip_wm_in_uniform_mv_field; |
| |
| // Enable/disable ME for interinter wedge search. |
| int disable_interinter_wedge_newmv_search; |
| |
| // Enable/disable smooth inter-intra mode |
| int disable_smooth_interintra; |
| |
| // skip sharp_filter evaluation based on regular and smooth filter rd for |
| // dual_filter=0 case |
| int skip_sharp_interp_filter_search; |
| |
| // prune wedge and compound segment approximate rd evaluation based on |
| // compound average rd/ref_best_rd |
| int prune_comp_type_by_comp_avg; |
| |
| // Prune/gate motion mode evaluation based on token based rd |
| // during transform search for inter blocks |
| // Values are 0 (not used) , 1 - 3 with progressively increasing |
| // aggressiveness |
| int prune_motion_mode_level; |
| |
| // prune sgr ep using binary search like mechanism |
| int enable_sgr_ep_pruning; |
| |
| // Gate warp evaluation for motions of type IDENTITY, |
| // TRANSLATION and AFFINE(based on number of warp neighbors) |
| int prune_warp_using_wmtype; |
| |
| // Perform simple_motion_search on each possible subblock and use it to prune |
| // PARTITION_HORZ and PARTITION_VERT. |
| int simple_motion_search_prune_rect; |
| |
| // Perform simple motion search before none_partition to decide if we |
| // want to remove all partitions other than PARTITION_SPLIT. If set to 0, this |
| // model is disabled. If set to 1, the model attempts to perform |
| // PARTITION_SPLIT only. If set to 2, the model also attempts to prune |
| // PARTITION_SPLIT. |
| int simple_motion_search_split; |
| |
| // Use features from simple_motion_search to terminate prediction block |
| // partition after PARTITION_NONE |
| int simple_motion_search_early_term_none; |
| |
| int cb_pred_filter_search; |
| |
| // adaptive interp_filter search to allow skip of certain filter types. |
| int adaptive_interp_filter_search; |
| |
| // mask for skip evaluation of certain interp_filter type. |
| INTERP_FILTER_MASK interp_filter_search_mask; |
| |
| // Flag used to control the ref_best_rd based gating for chroma |
| int perform_best_rd_based_gating_for_chroma; |
| |
| // Enable/disable interintra wedge search. |
| int disable_wedge_interintra_search; |
| |
| // Disable loop restoration for Chroma plane |
| int disable_loop_restoration_chroma; |
| |
| // Reduce the wiener filter win size for luma |
| int reduce_wiener_window_size; |
| |
| // Flag used to control the extent of coeff R-D optimization |
| int perform_coeff_opt; |
| |
| // Flag used to control the speed of the eob selection in trellis. |
| int trellis_eob_fast; |
| |
| // This flag controls the use of non-RD mode decision. |
| int use_nonrd_pick_mode; |
| |
| // prune wedge and compound segment approximate rd evaluation based on |
| // compound average modeled rd |
| int prune_comp_type_by_model_rd; |
| |
| // Enable/disable smooth intra modes. |
| int disable_smooth_intra; |
| |
| // use reduced ref set for real-time mode |
| int use_real_time_ref_set; |
| |
| // Perform a full TX search on some modes while using the |
| // inter-mode RD model for others. Only enabled when |
| // inter_mode_rd_model_estimation != 0 |
| int inter_mode_rd_model_estimation_adaptive; |
| |
| // Use very reduced set of inter mode checks and fast non-rd mode cost |
| // estimation. Only enabled when use_nonrd_pick_mode is != 0 |
| int use_fast_nonrd_pick_mode; |
| |
| // Reuse inter prediction in fast non-rd mode. |
| int reuse_inter_pred_nonrd; |
| |
| // Perform coarse ME before calculating variance in variance-based partition |
| int estimate_motion_for_var_based_partition; |
| |
| // Instead of performing a full MV search, do a simple translation first |
| // and only perform a full MV search on the motion vectors that performed |
| // well. |
| int prune_mode_search_simple_translation; |
| |
| // Use compound reference for non-RD mode. |
| int use_comp_ref_nonrd; |
| |
| // check intra prediction for non-RD mode. |
| int check_intra_pred_nonrd; |
| } SPEED_FEATURES; |
| |
| struct AV1_COMP; |
| |
| void av1_set_speed_features_framesize_independent(struct AV1_COMP *cpi, |
| int speed); |
| void av1_set_speed_features_framesize_dependent(struct AV1_COMP *cpi, |
| int speed); |
| |
| #ifdef __cplusplus |
| } // extern "C" |
| #endif |
| |
| #endif // AOM_AV1_ENCODER_SPEED_FEATURES_H_ |