blob: 278e1ca92fd3013071208ebc14b8b32c64825277 [file] [log] [blame]
/*
* Copyright (c) 2016, Alliance for Open Media. All rights reserved
*
* This source code is subject to the terms of the BSD 2 Clause License and
* the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License
* was not distributed with this source code in the LICENSE file, you can
* obtain it at www.aomedia.org/license/software. If the Alliance for Open
* Media Patent License 1.0 was not distributed with this source code in the
* PATENTS file, you can obtain it at www.aomedia.org/license/patent.
*/
#include <limits.h>
#include <math.h>
#include "av1/encoder/aq_complexity.h"
#include "av1/encoder/aq_variance.h"
#include "av1/encoder/encodeframe.h"
#include "av1/common/seg_common.h"
#include "av1/encoder/segmentation.h"
#include "aom_dsp/aom_dsp_common.h"
#include "aom_ports/system_state.h"
#define AQ_C_SEGMENTS 5
#define DEFAULT_AQ2_SEG 3 // Neutral Q segment
#define AQ_C_STRENGTHS 3
static const double aq_c_q_adj_factor[AQ_C_STRENGTHS][AQ_C_SEGMENTS] = {
{ 1.75, 1.25, 1.05, 1.00, 0.90 },
{ 2.00, 1.50, 1.15, 1.00, 0.85 },
{ 2.50, 1.75, 1.25, 1.00, 0.80 }
};
static const double aq_c_transitions[AQ_C_STRENGTHS][AQ_C_SEGMENTS] = {
{ 0.15, 0.30, 0.55, 2.00, 100.0 },
{ 0.20, 0.40, 0.65, 2.00, 100.0 },
{ 0.25, 0.50, 0.75, 2.00, 100.0 }
};
static const double aq_c_var_thresholds[AQ_C_STRENGTHS][AQ_C_SEGMENTS] = {
{ -4.0, -3.0, -2.0, 100.00, 100.0 },
{ -3.5, -2.5, -1.5, 100.00, 100.0 },
{ -3.0, -2.0, -1.0, 100.00, 100.0 }
};
static int get_aq_c_strength(int q_index, aom_bit_depth_t bit_depth) {
// Approximate base quatizer (truncated to int)
const int base_quant = av1_ac_quant_QTX(q_index, 0, bit_depth) / 4;
return (base_quant > 10) + (base_quant > 25);
}
static bool is_frame_aq_enabled(const AV1_COMP *const cpi) {
const AV1_COMMON *const cm = &cpi->common;
const RefreshFrameFlagsInfo *const refresh_frame_flags = &cpi->refresh_frame;
return frame_is_intra_only(cm) || cm->features.error_resilient_mode ||
refresh_frame_flags->alt_ref_frame ||
(refresh_frame_flags->golden_frame && !cpi->rc.is_src_frame_alt_ref);
}
// Segmentation only makes sense if the target bits per SB is above a threshold.
// Below this the overheads will usually outweigh any benefit.
static bool is_sb_aq_enabled(const AV1_COMP *const cpi) {
return cpi->rc.sb64_target_rate >= 256;
}
void av1_setup_in_frame_q_adj(AV1_COMP *cpi) {
AV1_COMMON *const cm = &cpi->common;
const int base_qindex = cm->quant_params.base_qindex;
struct segmentation *const seg = &cm->seg;
const int resolution_change =
cm->prev_frame && (cm->width != cm->prev_frame->width ||
cm->height != cm->prev_frame->height);
// Make SURE use of floating point in this function is safe.
aom_clear_system_state();
if (resolution_change) {
memset(cpi->enc_seg.map, 0, cm->mi_params.mi_rows * cm->mi_params.mi_cols);
av1_clearall_segfeatures(seg);
av1_disable_segmentation(seg);
return;
}
if (is_frame_aq_enabled(cpi)) {
int segment;
const int aq_strength =
get_aq_c_strength(base_qindex, cm->seq_params->bit_depth);
// Clear down the segment map.
memset(cpi->enc_seg.map, DEFAULT_AQ2_SEG,
cm->mi_params.mi_rows * cm->mi_params.mi_cols);
av1_clearall_segfeatures(seg);
if (!is_sb_aq_enabled(cpi)) {
av1_disable_segmentation(seg);
return;
}
av1_enable_segmentation(seg);
// Default segment "Q" feature is disabled so it defaults to the baseline Q.
av1_disable_segfeature(seg, DEFAULT_AQ2_SEG, SEG_LVL_ALT_Q);
// Use some of the segments for in frame Q adjustment.
for (segment = 0; segment < AQ_C_SEGMENTS; ++segment) {
int qindex_delta;
if (segment == DEFAULT_AQ2_SEG) continue;
qindex_delta = av1_compute_qdelta_by_rate(
&cpi->rc, cm->current_frame.frame_type, base_qindex,
aq_c_q_adj_factor[aq_strength][segment], cpi->is_screen_content_type,
cm->seq_params->bit_depth);
// For AQ complexity mode, we dont allow Q0 in a segment if the base
// Q is not 0. Q0 (lossless) implies 4x4 only and in AQ mode 2 a segment
// Q delta is sometimes applied without going back around the rd loop.
// This could lead to an illegal combination of partition size and q.
if ((base_qindex != 0) && ((base_qindex + qindex_delta) == 0)) {
qindex_delta = -base_qindex + 1;
}
if ((base_qindex + qindex_delta) > 0) {
av1_enable_segfeature(seg, segment, SEG_LVL_ALT_Q);
av1_set_segdata(seg, segment, SEG_LVL_ALT_Q, qindex_delta);
}
}
}
}
#define DEFAULT_LV_THRESH 10.0
#define MIN_DEFAULT_LV_THRESH 8.0
// Select a segment for the current block.
// The choice of segment for a block depends on the ratio of the projected
// bits for the block vs a target average and its spatial complexity.
void av1_caq_select_segment(const AV1_COMP *cpi, MACROBLOCK *mb, BLOCK_SIZE bs,
int mi_row, int mi_col, int projected_rate) {
if ((!is_frame_aq_enabled(cpi)) || (!is_sb_aq_enabled(cpi))) return;
const AV1_COMMON *const cm = &cpi->common;
const int num_planes = av1_num_planes(cm);
const int mi_offset = mi_row * cm->mi_params.mi_cols + mi_col;
const int xmis = AOMMIN(cm->mi_params.mi_cols - mi_col, mi_size_wide[bs]);
const int ymis = AOMMIN(cm->mi_params.mi_rows - mi_row, mi_size_high[bs]);
int x, y;
int i;
unsigned char segment;
if (0) {
segment = DEFAULT_AQ2_SEG;
} else {
// Rate depends on fraction of a SB64 in frame (xmis * ymis / bw * bh).
// It is converted to bits << AV1_PROB_COST_SHIFT units.
const int64_t num = (int64_t)(cpi->rc.sb64_target_rate * xmis * ymis)
<< AV1_PROB_COST_SHIFT;
const int denom = cm->seq_params->mib_size * cm->seq_params->mib_size;
const int target_rate = (int)(num / denom);
double logvar;
double low_var_thresh;
const int aq_strength = get_aq_c_strength(cm->quant_params.base_qindex,
cm->seq_params->bit_depth);
aom_clear_system_state();
low_var_thresh =
(is_stat_consumption_stage_twopass(cpi))
? AOMMAX(exp(cpi->ppi->twopass.mb_av_energy), MIN_DEFAULT_LV_THRESH)
: DEFAULT_LV_THRESH;
av1_setup_src_planes(mb, cpi->source, mi_row, mi_col, num_planes, bs);
logvar = av1_log_block_var(cpi, mb, bs);
segment = AQ_C_SEGMENTS - 1; // Just in case no break out below.
for (i = 0; i < AQ_C_SEGMENTS; ++i) {
// Test rate against a threshold value and variance against a threshold.
// Increasing segment number (higher variance and complexity) = higher Q.
if ((projected_rate < target_rate * aq_c_transitions[aq_strength][i]) &&
(logvar < (low_var_thresh + aq_c_var_thresholds[aq_strength][i]))) {
segment = i;
break;
}
}
}
// Fill in the entires in the segment map corresponding to this SB64.
for (y = 0; y < ymis; y++) {
for (x = 0; x < xmis; x++) {
cpi->enc_seg.map[mi_offset + y * cm->mi_params.mi_cols + x] = segment;
}
}
}