| /* | |
| * Copyright (c) 2016, Alliance for Open Media. All rights reserved | |
| * | |
| * This source code is subject to the terms of the BSD 2 Clause License and | |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License | |
| * was not distributed with this source code in the LICENSE file, you can | |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open | |
| * Media Patent License 1.0 was not distributed with this source code in the | |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. | |
| */ | |
| #include <limits.h> | |
| #include <math.h> | |
| #include <stdio.h> | |
| #include "config/aom_config.h" | |
| #include "config/aom_dsp_rtcd.h" | |
| #include "aom_dsp/aom_dsp_common.h" | |
| #include "aom_mem/aom_mem.h" | |
| #include "aom_ports/mem.h" | |
| #include "av1/common/av1_common_int.h" | |
| #include "av1/common/common.h" | |
| #include "av1/common/filter.h" | |
| #include "av1/common/mvref_common.h" | |
| #include "av1/common/reconinter.h" | |
| #include "av1/encoder/encoder.h" | |
| #include "av1/encoder/encodemv.h" | |
| #include "av1/encoder/mcomp.h" | |
| #include "av1/encoder/rdopt.h" | |
| #include "av1/encoder/reconinter_enc.h" | |
| static INLINE void init_mv_cost_params(MV_COST_PARAMS *mv_cost_params, | |
| const MACROBLOCK *x, const MV *ref_mv) { | |
| mv_cost_params->ref_mv = ref_mv; | |
| mv_cost_params->full_ref_mv = get_fullmv_from_mv(ref_mv); | |
| mv_cost_params->error_per_bit = x->errorperbit; | |
| mv_cost_params->sad_per_bit = x->sadperbit; | |
| mv_cost_params->mvjcost = x->nmv_vec_cost; | |
| mv_cost_params->mvcost[0] = x->mv_cost_stack[0]; | |
| mv_cost_params->mvcost[1] = x->mv_cost_stack[1]; | |
| mv_cost_params->mv_cost_type = x->mv_cost_type; | |
| } | |
| static INLINE void init_ms_buffers(MSBuffers *ms_buffers, const MACROBLOCK *x) { | |
| ms_buffers->ref = &x->e_mbd.plane[0].pre[0]; | |
| ms_buffers->src = &x->plane[0].src; | |
| ms_buffers->second_pred = NULL; | |
| ms_buffers->mask = NULL; | |
| ms_buffers->mask_stride = 0; | |
| ms_buffers->inv_mask = 0; | |
| ms_buffers->wsrc = x->wsrc_buf; | |
| ms_buffers->obmc_mask = x->mask_buf; | |
| } | |
| void av1_make_default_fullpel_ms_params( | |
| FULLPEL_MOTION_SEARCH_PARAMS *ms_params, const struct AV1_COMP *cpi, | |
| const MACROBLOCK *x, BLOCK_SIZE bsize, const MV *ref_mv, | |
| const search_site_config *search_sites) { | |
| // High level params | |
| ms_params->bsize = bsize; | |
| ms_params->vfp = &cpi->fn_ptr[bsize]; | |
| init_ms_buffers(&ms_params->ms_buffers, x); | |
| ms_params->search_method = cpi->sf.mv_sf.search_method; | |
| ms_params->search_sites = search_sites; | |
| ms_params->mesh_patterns[0] = cpi->sf.mv_sf.mesh_patterns; | |
| ms_params->mesh_patterns[1] = cpi->sf.mv_sf.intrabc_mesh_patterns; | |
| ms_params->force_mesh_thresh = cpi->sf.mv_sf.exhaustive_searches_thresh; | |
| ms_params->prune_mesh_search = cpi->sf.mv_sf.prune_mesh_search; | |
| ms_params->run_mesh_search = 0; | |
| ms_params->is_intra_mode = 0; | |
| ms_params->fast_obmc_search = cpi->sf.mv_sf.obmc_full_pixel_search_level; | |
| ms_params->mv_limits = x->mv_limits; | |
| av1_set_mv_search_range(&ms_params->mv_limits, ref_mv); | |
| // Mvcost params | |
| init_mv_cost_params(&ms_params->mv_cost_params, x, ref_mv); | |
| } | |
| void av1_make_default_subpel_ms_params( | |
| SUBPEL_MOTION_SEARCH_PARAMS *ms_params, const struct AV1_COMP *cpi, | |
| const MACROBLOCK *x, BLOCK_SIZE bsize, const MV *ref_mv, | |
| const int *cost_list, const uint8_t *second_pred, const uint8_t *mask, | |
| int mask_stride, int invert_mask, int do_reset_fractional_mv) { | |
| const AV1_COMMON *cm = &cpi->common; | |
| // High level params | |
| ms_params->allow_hp = cm->features.allow_high_precision_mv; | |
| ms_params->forced_stop = cpi->sf.mv_sf.subpel_force_stop; | |
| ms_params->iters_per_step = cpi->sf.mv_sf.subpel_iters_per_step; | |
| ms_params->cost_list = cond_cost_list_const(cpi, cost_list); | |
| ms_params->do_reset_fractional_mv = do_reset_fractional_mv; | |
| // Mvcost params | |
| init_mv_cost_params(&ms_params->mv_cost_params, x, ref_mv); | |
| // Subpel variance params | |
| ms_params->var_params.vfp = &cpi->fn_ptr[bsize]; | |
| ms_params->var_params.subpel_search_type = | |
| cpi->sf.mv_sf.use_accurate_subpel_search; | |
| ms_params->var_params.second_pred = second_pred; | |
| ms_params->var_params.mask = mask; | |
| ms_params->var_params.mask_stride = mask_stride; | |
| ms_params->var_params.invert_mask = invert_mask; | |
| ms_params->var_params.w = block_size_wide[bsize]; | |
| ms_params->var_params.h = block_size_high[bsize]; | |
| } | |
| static INLINE int get_offset_from_mv(const FULLPEL_MV *mv, int stride) { | |
| return mv->row * stride + mv->col; | |
| } | |
| static INLINE const uint8_t *get_buf_from_mv(const struct buf_2d *buf, | |
| const FULLPEL_MV *mv) { | |
| return &buf->buf[get_offset_from_mv(mv, buf->stride)]; | |
| } | |
| void av1_set_mv_search_range(FullMvLimits *mv_limits, const MV *mv) { | |
| int col_min = | |
| GET_MV_RAWPEL(mv->col) - MAX_FULL_PEL_VAL + (mv->col & 7 ? 1 : 0); | |
| int row_min = | |
| GET_MV_RAWPEL(mv->row) - MAX_FULL_PEL_VAL + (mv->row & 7 ? 1 : 0); | |
| int col_max = GET_MV_RAWPEL(mv->col) + MAX_FULL_PEL_VAL; | |
| int row_max = GET_MV_RAWPEL(mv->row) + MAX_FULL_PEL_VAL; | |
| col_min = AOMMAX(col_min, GET_MV_RAWPEL(MV_LOW) + 1); | |
| row_min = AOMMAX(row_min, GET_MV_RAWPEL(MV_LOW) + 1); | |
| col_max = AOMMIN(col_max, GET_MV_RAWPEL(MV_UPP) - 1); | |
| row_max = AOMMIN(row_max, GET_MV_RAWPEL(MV_UPP) - 1); | |
| // Get intersection of UMV window and valid MV window to reduce # of checks | |
| // in diamond search. | |
| if (mv_limits->col_min < col_min) mv_limits->col_min = col_min; | |
| if (mv_limits->col_max > col_max) mv_limits->col_max = col_max; | |
| if (mv_limits->row_min < row_min) mv_limits->row_min = row_min; | |
| if (mv_limits->row_max > row_max) mv_limits->row_max = row_max; | |
| } | |
| int av1_init_search_range(int size) { | |
| int sr = 0; | |
| // Minimum search size no matter what the passed in value. | |
| size = AOMMAX(16, size); | |
| while ((size << sr) < MAX_FULL_PEL_VAL) sr++; | |
| sr = AOMMIN(sr, MAX_MVSEARCH_STEPS - 2); | |
| return sr; | |
| } | |
| // ============================================================================ | |
| // Cost of motion vectors | |
| // ============================================================================ | |
| // TODO(any): Adaptively adjust the regularization strength based on image size | |
| // and motion activity instead of using hard-coded values. It seems like we | |
| // roughly half the lambda for each increase in resolution | |
| // These are multiplier used to perform regularization in motion compensation | |
| // when x->mv_cost_type is set to MV_COST_L1. | |
| // LOWRES | |
| #define SSE_LAMBDA_LOWRES 2 // Used by mv_cost_err_fn | |
| #define SAD_LAMBDA_LOWRES 32 // Used by mvsad_err_cost during full pixel search | |
| // MIDRES | |
| #define SSE_LAMBDA_MIDRES 0 // Used by mv_cost_err_fn | |
| #define SAD_LAMBDA_MIDRES 15 // Used by mvsad_err_cost during full pixel search | |
| // HDRES | |
| #define SSE_LAMBDA_HDRES 1 // Used by mv_cost_err_fn | |
| #define SAD_LAMBDA_HDRES 8 // Used by mvsad_err_cost during full pixel search | |
| // Returns the rate of encoding the current motion vector based on the | |
| // joint_cost and comp_cost. joint_costs covers the cost of transmitting | |
| // JOINT_MV, and comp_cost covers the cost of transmitting the actual motion | |
| // vector. | |
| static INLINE int mv_cost(const MV *mv, const int *joint_cost, | |
| const int *const comp_cost[2]) { | |
| return joint_cost[av1_get_mv_joint(mv)] + comp_cost[0][mv->row] + | |
| comp_cost[1][mv->col]; | |
| } | |
| #define CONVERT_TO_CONST_MVCOST(ptr) ((const int *const *)(ptr)) | |
| // Returns the cost of encoding the motion vector diff := *mv - *ref. The cost | |
| // is defined as the rate required to encode diff * weight, rounded to the | |
| // nearest 2 ** 7. | |
| // This is NOT used during motion compensation. | |
| int av1_mv_bit_cost(const MV *mv, const MV *ref_mv, const int *mvjcost, | |
| int *mvcost[2], int weight) { | |
| const MV diff = { mv->row - ref_mv->row, mv->col - ref_mv->col }; | |
| return ROUND_POWER_OF_TWO( | |
| mv_cost(&diff, mvjcost, CONVERT_TO_CONST_MVCOST(mvcost)) * weight, 7); | |
| } | |
| // Returns the cost of using the current mv during the motion search. This is | |
| // used when var is used as the error metric. | |
| #define PIXEL_TRANSFORM_ERROR_SCALE 4 | |
| static INLINE int mv_err_cost(const MV *mv, const MV *ref_mv, | |
| const int *mvjcost, const int *const mvcost[2], | |
| int error_per_bit, MV_COST_TYPE mv_cost_type) { | |
| const MV diff = { mv->row - ref_mv->row, mv->col - ref_mv->col }; | |
| const MV abs_diff = { abs(diff.row), abs(diff.col) }; | |
| switch (mv_cost_type) { | |
| case MV_COST_ENTROPY: | |
| if (mvcost) { | |
| return (int)ROUND_POWER_OF_TWO_64( | |
| (int64_t)mv_cost(&diff, mvjcost, mvcost) * error_per_bit, | |
| RDDIV_BITS + AV1_PROB_COST_SHIFT - RD_EPB_SHIFT + | |
| PIXEL_TRANSFORM_ERROR_SCALE); | |
| } | |
| return 0; | |
| case MV_COST_L1_LOWRES: | |
| return (SSE_LAMBDA_LOWRES * (abs_diff.row + abs_diff.col)) >> 3; | |
| case MV_COST_L1_MIDRES: | |
| return (SSE_LAMBDA_MIDRES * (abs_diff.row + abs_diff.col)) >> 3; | |
| case MV_COST_L1_HDRES: | |
| return (SSE_LAMBDA_HDRES * (abs_diff.row + abs_diff.col)) >> 3; | |
| case MV_COST_NONE: return 0; | |
| default: assert(0 && "Invalid rd_cost_type"); return 0; | |
| } | |
| } | |
| static INLINE int mv_err_cost_(const MV *mv, | |
| const MV_COST_PARAMS *mv_cost_params) { | |
| return mv_err_cost(mv, mv_cost_params->ref_mv, mv_cost_params->mvjcost, | |
| mv_cost_params->mvcost, mv_cost_params->error_per_bit, | |
| mv_cost_params->mv_cost_type); | |
| } | |
| // Returns the cost of using the current mv during the motion search. This is | |
| // only used during full pixel motion search when sad is used as the error | |
| // metric | |
| static INLINE int mvsad_err_cost(const FULLPEL_MV *mv, const FULLPEL_MV *ref_mv, | |
| const int *mvjcost, const int *const mvcost[2], | |
| int sad_per_bit, MV_COST_TYPE mv_cost_type) { | |
| const MV diff = { GET_MV_SUBPEL(mv->row - ref_mv->row), | |
| GET_MV_SUBPEL(mv->col - ref_mv->col) }; | |
| switch (mv_cost_type) { | |
| case MV_COST_ENTROPY: | |
| return ROUND_POWER_OF_TWO( | |
| (unsigned)mv_cost(&diff, mvjcost, CONVERT_TO_CONST_MVCOST(mvcost)) * | |
| sad_per_bit, | |
| AV1_PROB_COST_SHIFT); | |
| case MV_COST_L1_LOWRES: | |
| return (SAD_LAMBDA_LOWRES * (abs(diff.row) + abs(diff.col))) >> 3; | |
| case MV_COST_L1_MIDRES: | |
| return (SAD_LAMBDA_MIDRES * (abs(diff.row) + abs(diff.col))) >> 3; | |
| case MV_COST_L1_HDRES: | |
| return (SAD_LAMBDA_HDRES * (abs(diff.row) + abs(diff.col))) >> 3; | |
| case MV_COST_NONE: return 0; | |
| default: assert(0 && "Invalid rd_cost_type"); return 0; | |
| } | |
| } | |
| static INLINE int mvsad_err_cost_(const FULLPEL_MV *mv, | |
| const MV_COST_PARAMS *mv_cost_params) { | |
| return mvsad_err_cost(mv, &mv_cost_params->full_ref_mv, | |
| mv_cost_params->mvjcost, mv_cost_params->mvcost, | |
| mv_cost_params->sad_per_bit, | |
| mv_cost_params->mv_cost_type); | |
| } | |
| // ============================================================================= | |
| // Fullpixel Motion Search: Translational | |
| // ============================================================================= | |
| #define MAX_PATTERN_SCALES 11 | |
| #define MAX_PATTERN_CANDIDATES 8 // max number of candidates per scale | |
| #define PATTERN_CANDIDATES_REF 3 // number of refinement candidates | |
| void av1_init_dsmotion_compensation(search_site_config *cfg, int stride) { | |
| int ss_count = 0; | |
| int stage_index = MAX_MVSEARCH_STEPS - 1; | |
| cfg->ss[stage_index][0].mv.col = cfg->ss[stage_index][0].mv.row = 0; | |
| cfg->ss[stage_index][0].offset = 0; | |
| cfg->stride = stride; | |
| for (int radius = MAX_FIRST_STEP; radius > 0; radius /= 2) { | |
| int num_search_pts = 8; | |
| const FULLPEL_MV ss_mvs[13] = { | |
| { 0, 0 }, { -radius, 0 }, { radius, 0 }, | |
| { 0, -radius }, { 0, radius }, { -radius, -radius }, | |
| { radius, radius }, { -radius, radius }, { radius, -radius }, | |
| }; | |
| int i; | |
| for (i = 0; i <= num_search_pts; ++i) { | |
| search_site *const ss = &cfg->ss[stage_index][i]; | |
| ss->mv = ss_mvs[i]; | |
| ss->offset = get_offset_from_mv(&ss->mv, stride); | |
| } | |
| cfg->searches_per_step[stage_index] = num_search_pts; | |
| cfg->radius[stage_index] = radius; | |
| --stage_index; | |
| ++ss_count; | |
| } | |
| cfg->ss_count = ss_count; | |
| } | |
| void av1_init_motion_fpf(search_site_config *cfg, int stride) { | |
| int ss_count = 0; | |
| int stage_index = MAX_MVSEARCH_STEPS - 1; | |
| cfg->ss[stage_index][0].mv.col = cfg->ss[stage_index][0].mv.row = 0; | |
| cfg->ss[stage_index][0].offset = 0; | |
| cfg->stride = stride; | |
| for (int radius = MAX_FIRST_STEP; radius > 0; radius /= 2) { | |
| // Generate offsets for 8 search sites per step. | |
| int tan_radius = AOMMAX((int)(0.41 * radius), 1); | |
| int num_search_pts = 12; | |
| if (radius == 1) num_search_pts = 8; | |
| const FULLPEL_MV ss_mvs[13] = { | |
| { 0, 0 }, | |
| { -radius, 0 }, | |
| { radius, 0 }, | |
| { 0, -radius }, | |
| { 0, radius }, | |
| { -radius, -tan_radius }, | |
| { radius, tan_radius }, | |
| { -tan_radius, radius }, | |
| { tan_radius, -radius }, | |
| { -radius, tan_radius }, | |
| { radius, -tan_radius }, | |
| { tan_radius, radius }, | |
| { -tan_radius, -radius }, | |
| }; | |
| int i; | |
| for (i = 0; i <= num_search_pts; ++i) { | |
| search_site *const ss = &cfg->ss[stage_index][i]; | |
| ss->mv = ss_mvs[i]; | |
| ss->offset = get_offset_from_mv(&ss->mv, stride); | |
| } | |
| cfg->searches_per_step[stage_index] = num_search_pts; | |
| cfg->radius[stage_index] = radius; | |
| --stage_index; | |
| ++ss_count; | |
| } | |
| cfg->ss_count = ss_count; | |
| } | |
| void av1_init3smotion_compensation(search_site_config *cfg, int stride) { | |
| int ss_count = 0; | |
| int stage_index = 0; | |
| cfg->stride = stride; | |
| int radius = 1; | |
| for (stage_index = 0; stage_index < 15; ++stage_index) { | |
| int tan_radius = AOMMAX((int)(0.41 * radius), 1); | |
| int num_search_pts = 12; | |
| if (radius <= 5) { | |
| tan_radius = radius; | |
| num_search_pts = 8; | |
| } | |
| const FULLPEL_MV ss_mvs[13] = { | |
| { 0, 0 }, | |
| { -radius, 0 }, | |
| { radius, 0 }, | |
| { 0, -radius }, | |
| { 0, radius }, | |
| { -radius, -tan_radius }, | |
| { radius, tan_radius }, | |
| { -tan_radius, radius }, | |
| { tan_radius, -radius }, | |
| { -radius, tan_radius }, | |
| { radius, -tan_radius }, | |
| { tan_radius, radius }, | |
| { -tan_radius, -radius }, | |
| }; | |
| for (int i = 0; i <= num_search_pts; ++i) { | |
| search_site *const ss = &cfg->ss[stage_index][i]; | |
| ss->mv = ss_mvs[i]; | |
| ss->offset = get_offset_from_mv(&ss->mv, stride); | |
| } | |
| cfg->searches_per_step[stage_index] = num_search_pts; | |
| cfg->radius[stage_index] = radius; | |
| ++ss_count; | |
| if (stage_index < 12) | |
| radius = (int)AOMMAX((radius * 1.5 + 0.5), radius + 1); | |
| } | |
| cfg->ss_count = ss_count; | |
| } | |
| // Checks whether the mv is within range of the mv_limits | |
| static INLINE int check_bounds(const FullMvLimits *mv_limits, int row, int col, | |
| int range) { | |
| return ((row - range) >= mv_limits->row_min) & | |
| ((row + range) <= mv_limits->row_max) & | |
| ((col - range) >= mv_limits->col_min) & | |
| ((col + range) <= mv_limits->col_max); | |
| } | |
| static INLINE int get_mvpred_var_cost( | |
| const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, const FULLPEL_MV *this_mv) { | |
| const aom_variance_fn_ptr_t *vfp = ms_params->vfp; | |
| const MV sub_this_mv = get_mv_from_fullmv(this_mv); | |
| const struct buf_2d *const src = ms_params->ms_buffers.src; | |
| const struct buf_2d *const ref = ms_params->ms_buffers.ref; | |
| const uint8_t *src_buf = src->buf; | |
| const int src_stride = src->stride; | |
| const int ref_stride = ref->stride; | |
| unsigned unused; | |
| int bestsme; | |
| bestsme = vfp->vf(src_buf, src_stride, get_buf_from_mv(ref, this_mv), | |
| ref_stride, &unused); | |
| bestsme += mv_err_cost_(&sub_this_mv, &ms_params->mv_cost_params); | |
| return bestsme; | |
| } | |
| static INLINE int get_mvpred_sad(const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | |
| const struct buf_2d *const src, | |
| const uint8_t *const ref_address, | |
| const int ref_stride) { | |
| const aom_variance_fn_ptr_t *vfp = ms_params->vfp; | |
| const uint8_t *src_buf = src->buf; | |
| const int src_stride = src->stride; | |
| return vfp->sdf(src_buf, src_stride, ref_address, ref_stride); | |
| } | |
| static INLINE int get_mvpred_compound_var_cost( | |
| const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, const FULLPEL_MV *this_mv) { | |
| const aom_variance_fn_ptr_t *vfp = ms_params->vfp; | |
| const struct buf_2d *const src = ms_params->ms_buffers.src; | |
| const struct buf_2d *const ref = ms_params->ms_buffers.ref; | |
| const uint8_t *src_buf = src->buf; | |
| const int src_stride = src->stride; | |
| const int ref_stride = ref->stride; | |
| const uint8_t *mask = ms_params->ms_buffers.mask; | |
| const uint8_t *second_pred = ms_params->ms_buffers.second_pred; | |
| const int mask_stride = ms_params->ms_buffers.mask_stride; | |
| const int invert_mask = ms_params->ms_buffers.inv_mask; | |
| unsigned unused; | |
| int bestsme; | |
| if (mask) { | |
| bestsme = vfp->msvf(src_buf, src_stride, 0, 0, | |
| get_buf_from_mv(ref, this_mv), ref_stride, second_pred, | |
| mask, mask_stride, invert_mask, &unused); | |
| } else if (second_pred) { | |
| bestsme = vfp->svaf(get_buf_from_mv(ref, this_mv), ref_stride, 0, 0, | |
| src_buf, src_stride, &unused, second_pred); | |
| } else { | |
| bestsme = vfp->vf(src_buf, src_stride, get_buf_from_mv(ref, this_mv), | |
| ref_stride, &unused); | |
| } | |
| const MV sub_this_mv = get_mv_from_fullmv(this_mv); | |
| bestsme += mv_err_cost_(&sub_this_mv, &ms_params->mv_cost_params); | |
| return bestsme; | |
| } | |
| static INLINE int get_mvpred_compound_sad( | |
| const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | |
| const struct buf_2d *const src, const uint8_t *const ref_address, | |
| const int ref_stride) { | |
| const aom_variance_fn_ptr_t *vfp = ms_params->vfp; | |
| const uint8_t *src_buf = src->buf; | |
| const int src_stride = src->stride; | |
| const uint8_t *mask = ms_params->ms_buffers.mask; | |
| const uint8_t *second_pred = ms_params->ms_buffers.second_pred; | |
| const int mask_stride = ms_params->ms_buffers.mask_stride; | |
| const int invert_mask = ms_params->ms_buffers.inv_mask; | |
| if (mask) { | |
| return vfp->msdf(src_buf, src_stride, ref_address, ref_stride, second_pred, | |
| mask, mask_stride, invert_mask); | |
| } else if (second_pred) { | |
| return vfp->sdaf(src_buf, src_stride, ref_address, ref_stride, second_pred); | |
| } else { | |
| return vfp->sdf(src_buf, src_stride, ref_address, ref_stride); | |
| } | |
| } | |
| // Calculates and returns a sad+mvcost list around an integer best pel during | |
| // fullpixel motion search. The resulting list can be used to speed up subpel | |
| // motion search later. | |
| #define USE_SAD_COSTLIST 1 | |
| // calc_int_cost_list uses var to populate the costlist, which is more accurate | |
| // than sad but slightly slower. | |
| static AOM_FORCE_INLINE void calc_int_cost_list( | |
| const FULLPEL_MV best_mv, const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | |
| int *cost_list) { | |
| static const FULLPEL_MV neighbors[4] = { | |
| { 0, -1 }, { 1, 0 }, { 0, 1 }, { -1, 0 } | |
| }; | |
| const int br = best_mv.row; | |
| const int bc = best_mv.col; | |
| cost_list[0] = get_mvpred_var_cost(ms_params, &best_mv); | |
| if (check_bounds(&ms_params->mv_limits, br, bc, 1)) { | |
| for (int i = 0; i < 4; i++) { | |
| const FULLPEL_MV neighbor_mv = { br + neighbors[i].row, | |
| bc + neighbors[i].col }; | |
| cost_list[i + 1] = get_mvpred_var_cost(ms_params, &neighbor_mv); | |
| } | |
| } else { | |
| for (int i = 0; i < 4; i++) { | |
| const FULLPEL_MV neighbor_mv = { br + neighbors[i].row, | |
| bc + neighbors[i].col }; | |
| if (!av1_is_fullmv_in_range(&ms_params->mv_limits, neighbor_mv)) { | |
| cost_list[i + 1] = INT_MAX; | |
| } else { | |
| cost_list[i + 1] = get_mvpred_var_cost(ms_params, &neighbor_mv); | |
| } | |
| } | |
| } | |
| } | |
| // calc_int_sad_list uses sad to populate the costlist, which is less accurate | |
| // than var but faster. | |
| static AOM_FORCE_INLINE void calc_int_sad_list( | |
| const FULLPEL_MV best_mv, const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | |
| int *cost_list, int costlist_has_sad) { | |
| static const FULLPEL_MV neighbors[4] = { | |
| { 0, -1 }, { 1, 0 }, { 0, 1 }, { -1, 0 } | |
| }; | |
| const struct buf_2d *const src = ms_params->ms_buffers.src; | |
| const struct buf_2d *const ref = ms_params->ms_buffers.ref; | |
| const int ref_stride = ref->stride; | |
| const int br = best_mv.row; | |
| const int bc = best_mv.col; | |
| assert(av1_is_fullmv_in_range(&ms_params->mv_limits, best_mv)); | |
| // Refresh the costlist it does not contain valid sad | |
| if (!costlist_has_sad) { | |
| cost_list[0] = get_mvpred_sad(ms_params, src, | |
| get_buf_from_mv(ref, &best_mv), ref_stride); | |
| if (check_bounds(&ms_params->mv_limits, br, bc, 1)) { | |
| for (int i = 0; i < 4; i++) { | |
| const FULLPEL_MV this_mv = { br + neighbors[i].row, | |
| bc + neighbors[i].col }; | |
| cost_list[i + 1] = get_mvpred_sad( | |
| ms_params, src, get_buf_from_mv(ref, &this_mv), ref_stride); | |
| } | |
| } else { | |
| for (int i = 0; i < 4; i++) { | |
| const FULLPEL_MV this_mv = { br + neighbors[i].row, | |
| bc + neighbors[i].col }; | |
| if (!av1_is_fullmv_in_range(&ms_params->mv_limits, this_mv)) { | |
| cost_list[i + 1] = INT_MAX; | |
| } else { | |
| cost_list[i + 1] = get_mvpred_sad( | |
| ms_params, src, get_buf_from_mv(ref, &this_mv), ref_stride); | |
| } | |
| } | |
| } | |
| } | |
| const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | |
| cost_list[0] += mvsad_err_cost_(&best_mv, mv_cost_params); | |
| for (int idx = 0; idx < 4; idx++) { | |
| if (cost_list[idx + 1] != INT_MAX) { | |
| const FULLPEL_MV this_mv = { br + neighbors[idx].row, | |
| bc + neighbors[idx].col }; | |
| cost_list[idx + 1] += mvsad_err_cost_(&this_mv, mv_cost_params); | |
| } | |
| } | |
| } | |
| #define CHECK_BETTER \ | |
| if (thissad < bestsad) { \ | |
| int tmp_thissad = thissad; \ | |
| if (use_mvcost) thissad += mvsad_err_cost_(&this_mv, mv_cost_params); \ | |
| if (thissad < bestsad) { \ | |
| raw_bestsad = tmp_thissad; \ | |
| bestsad = thissad; \ | |
| best_site = i; \ | |
| } \ | |
| } | |
| // Generic pattern search function that searches over multiple scales. | |
| // Each scale can have a different number of candidates and shape of | |
| // candidates as indicated in the num_candidates and candidates arrays | |
| // passed into this function | |
| static int pattern_search( | |
| FULLPEL_MV start_mv, const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | |
| const int search_param, const int do_init_search, | |
| const int num_candidates[MAX_PATTERN_SCALES], | |
| const MV candidates[MAX_PATTERN_SCALES][MAX_PATTERN_CANDIDATES], | |
| int *cost_list, FULLPEL_MV *best_mv) { | |
| static const int search_param_to_steps[MAX_MVSEARCH_STEPS] = { | |
| 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, | |
| }; | |
| int i, s, t; | |
| const struct buf_2d *const src = ms_params->ms_buffers.src; | |
| const struct buf_2d *const ref = ms_params->ms_buffers.ref; | |
| const int ref_stride = ref->stride; | |
| const int last_is_4 = num_candidates[0] == 4; | |
| int br, bc; | |
| int bestsad = INT_MAX, raw_bestsad = INT_MAX; | |
| int thissad; | |
| int k = -1; | |
| const int use_mvcost = ms_params->mv_cost_params.mv_cost_type != MV_COST_NONE; | |
| const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | |
| assert(search_param < MAX_MVSEARCH_STEPS); | |
| int best_init_s = search_param_to_steps[search_param]; | |
| // adjust ref_mv to make sure it is within MV range | |
| clamp_fullmv(&start_mv, &ms_params->mv_limits); | |
| br = start_mv.row; | |
| bc = start_mv.col; | |
| if (cost_list != NULL) { | |
| cost_list[0] = cost_list[1] = cost_list[2] = cost_list[3] = cost_list[4] = | |
| INT_MAX; | |
| } | |
| int costlist_has_sad = 0; | |
| // Work out the start point for the search | |
| raw_bestsad = get_mvpred_sad(ms_params, src, get_buf_from_mv(ref, &start_mv), | |
| ref_stride); | |
| bestsad = raw_bestsad + mvsad_err_cost_(&start_mv, mv_cost_params); | |
| // Search all possible scales up to the search param around the center point | |
| // pick the scale of the point that is best as the starting scale of | |
| // further steps around it. | |
| if (do_init_search) { | |
| s = best_init_s; | |
| best_init_s = -1; | |
| for (t = 0; t <= s; ++t) { | |
| int best_site = -1; | |
| if (check_bounds(&ms_params->mv_limits, br, bc, 1 << t)) { | |
| for (i = 0; i < num_candidates[t]; i++) { | |
| const FULLPEL_MV this_mv = { br + candidates[t][i].row, | |
| bc + candidates[t][i].col }; | |
| thissad = get_mvpred_sad(ms_params, src, | |
| get_buf_from_mv(ref, &this_mv), ref_stride); | |
| CHECK_BETTER | |
| } | |
| } else { | |
| for (i = 0; i < num_candidates[t]; i++) { | |
| const FULLPEL_MV this_mv = { br + candidates[t][i].row, | |
| bc + candidates[t][i].col }; | |
| if (!av1_is_fullmv_in_range(&ms_params->mv_limits, this_mv)) continue; | |
| thissad = get_mvpred_sad(ms_params, src, | |
| get_buf_from_mv(ref, &this_mv), ref_stride); | |
| CHECK_BETTER | |
| } | |
| } | |
| if (best_site == -1) { | |
| continue; | |
| } else { | |
| best_init_s = t; | |
| k = best_site; | |
| } | |
| } | |
| if (best_init_s != -1) { | |
| br += candidates[best_init_s][k].row; | |
| bc += candidates[best_init_s][k].col; | |
| } | |
| } | |
| // If the center point is still the best, just skip this and move to | |
| // the refinement step. | |
| if (best_init_s != -1) { | |
| const int last_s = (last_is_4 && cost_list != NULL); | |
| int best_site = -1; | |
| s = best_init_s; | |
| for (; s >= last_s; s--) { | |
| // No need to search all points the 1st time if initial search was used | |
| if (!do_init_search || s != best_init_s) { | |
| if (check_bounds(&ms_params->mv_limits, br, bc, 1 << s)) { | |
| for (i = 0; i < num_candidates[s]; i++) { | |
| const FULLPEL_MV this_mv = { br + candidates[s][i].row, | |
| bc + candidates[s][i].col }; | |
| thissad = get_mvpred_sad( | |
| ms_params, src, get_buf_from_mv(ref, &this_mv), ref_stride); | |
| CHECK_BETTER | |
| } | |
| } else { | |
| for (i = 0; i < num_candidates[s]; i++) { | |
| const FULLPEL_MV this_mv = { br + candidates[s][i].row, | |
| bc + candidates[s][i].col }; | |
| if (!av1_is_fullmv_in_range(&ms_params->mv_limits, this_mv)) | |
| continue; | |
| thissad = get_mvpred_sad( | |
| ms_params, src, get_buf_from_mv(ref, &this_mv), ref_stride); | |
| CHECK_BETTER | |
| } | |
| } | |
| if (best_site == -1) { | |
| continue; | |
| } else { | |
| br += candidates[s][best_site].row; | |
| bc += candidates[s][best_site].col; | |
| k = best_site; | |
| } | |
| } | |
| do { | |
| int next_chkpts_indices[PATTERN_CANDIDATES_REF]; | |
| best_site = -1; | |
| next_chkpts_indices[0] = (k == 0) ? num_candidates[s] - 1 : k - 1; | |
| next_chkpts_indices[1] = k; | |
| next_chkpts_indices[2] = (k == num_candidates[s] - 1) ? 0 : k + 1; | |
| if (check_bounds(&ms_params->mv_limits, br, bc, 1 << s)) { | |
| for (i = 0; i < PATTERN_CANDIDATES_REF; i++) { | |
| const FULLPEL_MV this_mv = { | |
| br + candidates[s][next_chkpts_indices[i]].row, | |
| bc + candidates[s][next_chkpts_indices[i]].col | |
| }; | |
| thissad = get_mvpred_sad( | |
| ms_params, src, get_buf_from_mv(ref, &this_mv), ref_stride); | |
| CHECK_BETTER | |
| } | |
| } else { | |
| for (i = 0; i < PATTERN_CANDIDATES_REF; i++) { | |
| const FULLPEL_MV this_mv = { | |
| br + candidates[s][next_chkpts_indices[i]].row, | |
| bc + candidates[s][next_chkpts_indices[i]].col | |
| }; | |
| if (!av1_is_fullmv_in_range(&ms_params->mv_limits, this_mv)) | |
| continue; | |
| thissad = get_mvpred_sad( | |
| ms_params, src, get_buf_from_mv(ref, &this_mv), ref_stride); | |
| CHECK_BETTER | |
| } | |
| } | |
| if (best_site != -1) { | |
| k = next_chkpts_indices[best_site]; | |
| br += candidates[s][k].row; | |
| bc += candidates[s][k].col; | |
| } | |
| } while (best_site != -1); | |
| } | |
| // Note: If we enter the if below, then cost_list must be non-NULL. | |
| if (s == 0) { | |
| cost_list[0] = raw_bestsad; | |
| costlist_has_sad = 1; | |
| if (!do_init_search || s != best_init_s) { | |
| if (check_bounds(&ms_params->mv_limits, br, bc, 1 << s)) { | |
| for (i = 0; i < num_candidates[s]; i++) { | |
| const FULLPEL_MV this_mv = { br + candidates[s][i].row, | |
| bc + candidates[s][i].col }; | |
| cost_list[i + 1] = thissad = get_mvpred_sad( | |
| ms_params, src, get_buf_from_mv(ref, &this_mv), ref_stride); | |
| CHECK_BETTER | |
| } | |
| } else { | |
| for (i = 0; i < num_candidates[s]; i++) { | |
| const FULLPEL_MV this_mv = { br + candidates[s][i].row, | |
| bc + candidates[s][i].col }; | |
| if (!av1_is_fullmv_in_range(&ms_params->mv_limits, this_mv)) | |
| continue; | |
| cost_list[i + 1] = thissad = get_mvpred_sad( | |
| ms_params, src, get_buf_from_mv(ref, &this_mv), ref_stride); | |
| CHECK_BETTER | |
| } | |
| } | |
| if (best_site != -1) { | |
| br += candidates[s][best_site].row; | |
| bc += candidates[s][best_site].col; | |
| k = best_site; | |
| } | |
| } | |
| while (best_site != -1) { | |
| int next_chkpts_indices[PATTERN_CANDIDATES_REF]; | |
| best_site = -1; | |
| next_chkpts_indices[0] = (k == 0) ? num_candidates[s] - 1 : k - 1; | |
| next_chkpts_indices[1] = k; | |
| next_chkpts_indices[2] = (k == num_candidates[s] - 1) ? 0 : k + 1; | |
| cost_list[1] = cost_list[2] = cost_list[3] = cost_list[4] = INT_MAX; | |
| cost_list[((k + 2) % 4) + 1] = cost_list[0]; | |
| cost_list[0] = raw_bestsad; | |
| if (check_bounds(&ms_params->mv_limits, br, bc, 1 << s)) { | |
| for (i = 0; i < PATTERN_CANDIDATES_REF; i++) { | |
| const FULLPEL_MV this_mv = { | |
| br + candidates[s][next_chkpts_indices[i]].row, | |
| bc + candidates[s][next_chkpts_indices[i]].col | |
| }; | |
| cost_list[next_chkpts_indices[i] + 1] = thissad = get_mvpred_sad( | |
| ms_params, src, get_buf_from_mv(ref, &this_mv), ref_stride); | |
| CHECK_BETTER | |
| } | |
| } else { | |
| for (i = 0; i < PATTERN_CANDIDATES_REF; i++) { | |
| const FULLPEL_MV this_mv = { | |
| br + candidates[s][next_chkpts_indices[i]].row, | |
| bc + candidates[s][next_chkpts_indices[i]].col | |
| }; | |
| if (!av1_is_fullmv_in_range(&ms_params->mv_limits, this_mv)) { | |
| cost_list[next_chkpts_indices[i] + 1] = INT_MAX; | |
| continue; | |
| } | |
| cost_list[next_chkpts_indices[i] + 1] = thissad = get_mvpred_sad( | |
| ms_params, src, get_buf_from_mv(ref, &this_mv), ref_stride); | |
| CHECK_BETTER | |
| } | |
| } | |
| if (best_site != -1) { | |
| k = next_chkpts_indices[best_site]; | |
| br += candidates[s][k].row; | |
| bc += candidates[s][k].col; | |
| } | |
| } | |
| } | |
| } | |
| best_mv->row = br; | |
| best_mv->col = bc; | |
| // Returns the one-away integer pel cost/sad around the best as follows: | |
| // cost_list[0]: cost/sad at the best integer pel | |
| // cost_list[1]: cost/sad at delta {0, -1} (left) from the best integer pel | |
| // cost_list[2]: cost/sad at delta { 1, 0} (bottom) from the best integer pel | |
| // cost_list[3]: cost/sad at delta { 0, 1} (right) from the best integer pel | |
| // cost_list[4]: cost/sad at delta {-1, 0} (top) from the best integer pel | |
| if (cost_list) { | |
| if (USE_SAD_COSTLIST) { | |
| calc_int_sad_list(*best_mv, ms_params, cost_list, costlist_has_sad); | |
| } else { | |
| calc_int_cost_list(*best_mv, ms_params, cost_list); | |
| } | |
| } | |
| best_mv->row = br; | |
| best_mv->col = bc; | |
| const int var_cost = get_mvpred_var_cost(ms_params, best_mv); | |
| return var_cost; | |
| } | |
| #undef CHECK_BETTER | |
| // For the following foo_search, the input arguments are: | |
| // x: The struct used to hold a bunch of random configs. | |
| // start_mv: where we are starting our motion search | |
| // search_param: how many steps to skip in our motion search. For example, | |
| // a value 3 suggests that 3 search steps have already taken place prior to | |
| // this function call, so we jump directly to step 4 of the search process | |
| // sad_per_bit: a multiplier used to convert rate to sad cost | |
| // do_init_search: if on, do an initial search of all possible scales around the | |
| // start_mv, and then pick the best scale. | |
| // cond_list: used to hold the cost around the best full mv so we can use it to | |
| // speed up subpel search later. | |
| // vfp: a function pointer to the simd function so we can compute the cost | |
| // efficiently | |
| // ref_mv: the reference mv used to compute the mv cost | |
| static int hex_search(const FULLPEL_MV start_mv, | |
| const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | |
| const int search_param, const int do_init_search, | |
| int *cost_list, FULLPEL_MV *best_mv) { | |
| // First scale has 8-closest points, the rest have 6 points in hex shape | |
| // at increasing scales | |
| static const int hex_num_candidates[MAX_PATTERN_SCALES] = { 8, 6, 6, 6, 6, 6, | |
| 6, 6, 6, 6, 6 }; | |
| // Note that the largest candidate step at each scale is 2^scale | |
| /* clang-format off */ | |
| static const MV hex_candidates[MAX_PATTERN_SCALES][MAX_PATTERN_CANDIDATES] = { | |
| { { -1, -1 }, { 0, -1 }, { 1, -1 }, { 1, 0 }, { 1, 1 }, { 0, 1 }, { -1, 1 }, | |
| { -1, 0 } }, | |
| { { -1, -2 }, { 1, -2 }, { 2, 0 }, { 1, 2 }, { -1, 2 }, { -2, 0 } }, | |
| { { -2, -4 }, { 2, -4 }, { 4, 0 }, { 2, 4 }, { -2, 4 }, { -4, 0 } }, | |
| { { -4, -8 }, { 4, -8 }, { 8, 0 }, { 4, 8 }, { -4, 8 }, { -8, 0 } }, | |
| { { -8, -16 }, { 8, -16 }, { 16, 0 }, { 8, 16 }, { -8, 16 }, { -16, 0 } }, | |
| { { -16, -32 }, { 16, -32 }, { 32, 0 }, { 16, 32 }, { -16, 32 }, | |
| { -32, 0 } }, | |
| { { -32, -64 }, { 32, -64 }, { 64, 0 }, { 32, 64 }, { -32, 64 }, | |
| { -64, 0 } }, | |
| { { -64, -128 }, { 64, -128 }, { 128, 0 }, { 64, 128 }, { -64, 128 }, | |
| { -128, 0 } }, | |
| { { -128, -256 }, { 128, -256 }, { 256, 0 }, { 128, 256 }, { -128, 256 }, | |
| { -256, 0 } }, | |
| { { -256, -512 }, { 256, -512 }, { 512, 0 }, { 256, 512 }, { -256, 512 }, | |
| { -512, 0 } }, | |
| { { -512, -1024 }, { 512, -1024 }, { 1024, 0 }, { 512, 1024 }, | |
| { -512, 1024 }, { -1024, 0 } }, | |
| }; | |
| /* clang-format on */ | |
| return pattern_search(start_mv, ms_params, search_param, do_init_search, | |
| hex_num_candidates, hex_candidates, cost_list, best_mv); | |
| } | |
| static int bigdia_search(const FULLPEL_MV start_mv, | |
| const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | |
| const int search_param, const int do_init_search, | |
| int *cost_list, FULLPEL_MV *best_mv) { | |
| // First scale has 4-closest points, the rest have 8 points in diamond | |
| // shape at increasing scales | |
| static const int bigdia_num_candidates[MAX_PATTERN_SCALES] = { | |
| 4, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, | |
| }; | |
| // Note that the largest candidate step at each scale is 2^scale | |
| /* clang-format off */ | |
| static const MV | |
| bigdia_candidates[MAX_PATTERN_SCALES][MAX_PATTERN_CANDIDATES] = { | |
| { { 0, -1 }, { 1, 0 }, { 0, 1 }, { -1, 0 } }, | |
| { { -1, -1 }, { 0, -2 }, { 1, -1 }, { 2, 0 }, { 1, 1 }, { 0, 2 }, | |
| { -1, 1 }, { -2, 0 } }, | |
| { { -2, -2 }, { 0, -4 }, { 2, -2 }, { 4, 0 }, { 2, 2 }, { 0, 4 }, | |
| { -2, 2 }, { -4, 0 } }, | |
| { { -4, -4 }, { 0, -8 }, { 4, -4 }, { 8, 0 }, { 4, 4 }, { 0, 8 }, | |
| { -4, 4 }, { -8, 0 } }, | |
| { { -8, -8 }, { 0, -16 }, { 8, -8 }, { 16, 0 }, { 8, 8 }, { 0, 16 }, | |
| { -8, 8 }, { -16, 0 } }, | |
| { { -16, -16 }, { 0, -32 }, { 16, -16 }, { 32, 0 }, { 16, 16 }, | |
| { 0, 32 }, { -16, 16 }, { -32, 0 } }, | |
| { { -32, -32 }, { 0, -64 }, { 32, -32 }, { 64, 0 }, { 32, 32 }, | |
| { 0, 64 }, { -32, 32 }, { -64, 0 } }, | |
| { { -64, -64 }, { 0, -128 }, { 64, -64 }, { 128, 0 }, { 64, 64 }, | |
| { 0, 128 }, { -64, 64 }, { -128, 0 } }, | |
| { { -128, -128 }, { 0, -256 }, { 128, -128 }, { 256, 0 }, { 128, 128 }, | |
| { 0, 256 }, { -128, 128 }, { -256, 0 } }, | |
| { { -256, -256 }, { 0, -512 }, { 256, -256 }, { 512, 0 }, { 256, 256 }, | |
| { 0, 512 }, { -256, 256 }, { -512, 0 } }, | |
| { { -512, -512 }, { 0, -1024 }, { 512, -512 }, { 1024, 0 }, | |
| { 512, 512 }, { 0, 1024 }, { -512, 512 }, { -1024, 0 } }, | |
| }; | |
| /* clang-format on */ | |
| return pattern_search(start_mv, ms_params, search_param, do_init_search, | |
| bigdia_num_candidates, bigdia_candidates, cost_list, | |
| best_mv); | |
| } | |
| static int square_search(const FULLPEL_MV start_mv, | |
| const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | |
| const int search_param, const int do_init_search, | |
| int *cost_list, FULLPEL_MV *best_mv) { | |
| // All scales have 8 closest points in square shape | |
| static const int square_num_candidates[MAX_PATTERN_SCALES] = { | |
| 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, | |
| }; | |
| // Note that the largest candidate step at each scale is 2^scale | |
| /* clang-format off */ | |
| static const MV | |
| square_candidates[MAX_PATTERN_SCALES][MAX_PATTERN_CANDIDATES] = { | |
| { { -1, -1 }, { 0, -1 }, { 1, -1 }, { 1, 0 }, { 1, 1 }, { 0, 1 }, | |
| { -1, 1 }, { -1, 0 } }, | |
| { { -2, -2 }, { 0, -2 }, { 2, -2 }, { 2, 0 }, { 2, 2 }, { 0, 2 }, | |
| { -2, 2 }, { -2, 0 } }, | |
| { { -4, -4 }, { 0, -4 }, { 4, -4 }, { 4, 0 }, { 4, 4 }, { 0, 4 }, | |
| { -4, 4 }, { -4, 0 } }, | |
| { { -8, -8 }, { 0, -8 }, { 8, -8 }, { 8, 0 }, { 8, 8 }, { 0, 8 }, | |
| { -8, 8 }, { -8, 0 } }, | |
| { { -16, -16 }, { 0, -16 }, { 16, -16 }, { 16, 0 }, { 16, 16 }, | |
| { 0, 16 }, { -16, 16 }, { -16, 0 } }, | |
| { { -32, -32 }, { 0, -32 }, { 32, -32 }, { 32, 0 }, { 32, 32 }, | |
| { 0, 32 }, { -32, 32 }, { -32, 0 } }, | |
| { { -64, -64 }, { 0, -64 }, { 64, -64 }, { 64, 0 }, { 64, 64 }, | |
| { 0, 64 }, { -64, 64 }, { -64, 0 } }, | |
| { { -128, -128 }, { 0, -128 }, { 128, -128 }, { 128, 0 }, { 128, 128 }, | |
| { 0, 128 }, { -128, 128 }, { -128, 0 } }, | |
| { { -256, -256 }, { 0, -256 }, { 256, -256 }, { 256, 0 }, { 256, 256 }, | |
| { 0, 256 }, { -256, 256 }, { -256, 0 } }, | |
| { { -512, -512 }, { 0, -512 }, { 512, -512 }, { 512, 0 }, { 512, 512 }, | |
| { 0, 512 }, { -512, 512 }, { -512, 0 } }, | |
| { { -1024, -1024 }, { 0, -1024 }, { 1024, -1024 }, { 1024, 0 }, | |
| { 1024, 1024 }, { 0, 1024 }, { -1024, 1024 }, { -1024, 0 } }, | |
| }; | |
| /* clang-format on */ | |
| return pattern_search(start_mv, ms_params, search_param, do_init_search, | |
| square_num_candidates, square_candidates, cost_list, | |
| best_mv); | |
| } | |
| static int fast_hex_search(const FULLPEL_MV start_mv, | |
| const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | |
| const int search_param, const int do_init_search, | |
| int *cost_list, FULLPEL_MV *best_mv) { | |
| return hex_search(start_mv, ms_params, | |
| AOMMAX(MAX_MVSEARCH_STEPS - 2, search_param), | |
| do_init_search, cost_list, best_mv); | |
| } | |
| static int fast_dia_search(const FULLPEL_MV start_mv, | |
| const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | |
| const int search_param, const int do_init_search, | |
| int *cost_list, FULLPEL_MV *best_mv) { | |
| return bigdia_search(start_mv, ms_params, | |
| AOMMAX(MAX_MVSEARCH_STEPS - 2, search_param), | |
| do_init_search, cost_list, best_mv); | |
| } | |
| static int diamond_search_sad(FULLPEL_MV start_mv, | |
| const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | |
| const int search_param, int *num00, | |
| FULLPEL_MV *best_mv, FULLPEL_MV *second_best_mv) { | |
| const struct buf_2d *const src = ms_params->ms_buffers.src; | |
| const struct buf_2d *const ref = ms_params->ms_buffers.ref; | |
| const int ref_stride = ref->stride; | |
| const uint8_t *best_address; | |
| const aom_variance_fn_ptr_t *vfp = ms_params->vfp; | |
| const uint8_t *mask = ms_params->ms_buffers.mask; | |
| const uint8_t *second_pred = ms_params->ms_buffers.second_pred; | |
| const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | |
| const search_site_config *cfg = ms_params->search_sites; | |
| unsigned int bestsad = INT_MAX; | |
| int best_site = 0; | |
| int is_off_center = 0; | |
| clamp_fullmv(&start_mv, &ms_params->mv_limits); | |
| // search_param determines the length of the initial step and hence the number | |
| // of iterations. | |
| const int tot_steps = cfg->ss_count - search_param; | |
| *num00 = 0; | |
| *best_mv = start_mv; | |
| // Check the starting position | |
| best_address = get_buf_from_mv(ref, &start_mv); | |
| bestsad = get_mvpred_compound_sad(ms_params, src, best_address, ref_stride); | |
| bestsad += mvsad_err_cost_(best_mv, &ms_params->mv_cost_params); | |
| int next_step_size = tot_steps > 2 ? cfg->radius[tot_steps - 2] : 1; | |
| for (int step = tot_steps - 1; step >= 0; --step) { | |
| const search_site *ss = cfg->ss[step]; | |
| best_site = 0; | |
| if (step > 0) next_step_size = cfg->radius[step - 1]; | |
| int all_in = 1, j; | |
| // Trap illegal vectors | |
| all_in &= best_mv->row + ss[1].mv.row >= ms_params->mv_limits.row_min; | |
| all_in &= best_mv->row + ss[2].mv.row <= ms_params->mv_limits.row_max; | |
| all_in &= best_mv->col + ss[3].mv.col >= ms_params->mv_limits.col_min; | |
| all_in &= best_mv->col + ss[4].mv.col <= ms_params->mv_limits.col_max; | |
| // TODO(anyone): Implement 4 points search for msdf&sdaf | |
| if (all_in && !mask && !second_pred) { | |
| const uint8_t *src_buf = src->buf; | |
| const int src_stride = src->stride; | |
| for (int idx = 1; idx <= cfg->searches_per_step[step]; idx += 4) { | |
| unsigned char const *block_offset[4]; | |
| unsigned int sads[4]; | |
| for (j = 0; j < 4; j++) | |
| block_offset[j] = ss[idx + j].offset + best_address; | |
| vfp->sdx4df(src_buf, src_stride, block_offset, ref_stride, sads); | |
| for (j = 0; j < 4; j++) { | |
| if (sads[j] < bestsad) { | |
| const FULLPEL_MV this_mv = { best_mv->row + ss[idx + j].mv.row, | |
| best_mv->col + ss[idx + j].mv.col }; | |
| unsigned int thissad = | |
| sads[j] + mvsad_err_cost_(&this_mv, mv_cost_params); | |
| if (thissad < bestsad) { | |
| bestsad = thissad; | |
| best_site = idx + j; | |
| } | |
| } | |
| } | |
| } | |
| } else { | |
| for (int idx = 1; idx <= cfg->searches_per_step[step]; idx++) { | |
| const FULLPEL_MV this_mv = { best_mv->row + ss[idx].mv.row, | |
| best_mv->col + ss[idx].mv.col }; | |
| if (av1_is_fullmv_in_range(&ms_params->mv_limits, this_mv)) { | |
| const uint8_t *const check_here = ss[idx].offset + best_address; | |
| unsigned int thissad; | |
| thissad = | |
| get_mvpred_compound_sad(ms_params, src, check_here, ref_stride); | |
| if (thissad < bestsad) { | |
| thissad += mvsad_err_cost_(&this_mv, mv_cost_params); | |
| if (thissad < bestsad) { | |
| bestsad = thissad; | |
| best_site = idx; | |
| } | |
| } | |
| } | |
| } | |
| } | |
| if (best_site != 0) { | |
| if (second_best_mv) { | |
| *second_best_mv = *best_mv; | |
| } | |
| best_mv->row += ss[best_site].mv.row; | |
| best_mv->col += ss[best_site].mv.col; | |
| best_address += ss[best_site].offset; | |
| is_off_center = 1; | |
| } | |
| if (is_off_center == 0) (*num00)++; | |
| if (best_site == 0) { | |
| while (next_step_size == cfg->radius[step] && step > 2) { | |
| ++(*num00); | |
| --step; | |
| next_step_size = cfg->radius[step - 1]; | |
| } | |
| } | |
| } | |
| return bestsad; | |
| } | |
| /* do_refine: If last step (1-away) of n-step search doesn't pick the center | |
| point as the best match, we will do a final 1-away diamond | |
| refining search */ | |
| static int full_pixel_diamond(const FULLPEL_MV start_mv, | |
| const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | |
| const int step_param, int *cost_list, | |
| FULLPEL_MV *best_mv, FULLPEL_MV *second_best_mv) { | |
| const search_site_config *cfg = ms_params->search_sites; | |
| int thissme, n, num00 = 0; | |
| int bestsme = diamond_search_sad(start_mv, ms_params, step_param, &n, best_mv, | |
| second_best_mv); | |
| if (bestsme < INT_MAX) { | |
| bestsme = get_mvpred_compound_var_cost(ms_params, best_mv); | |
| } | |
| // If there won't be more n-step search, check to see if refining search is | |
| // needed. | |
| const int further_steps = cfg->ss_count - 1 - step_param; | |
| while (n < further_steps) { | |
| ++n; | |
| if (num00) { | |
| num00--; | |
| } else { | |
| // TODO(chiyotsai@google.com): There is another bug here where the second | |
| // best mv gets incorrectly overwritten. Fix it later. | |
| FULLPEL_MV tmp_best_mv; | |
| thissme = diamond_search_sad(start_mv, ms_params, step_param + n, &num00, | |
| &tmp_best_mv, second_best_mv); | |
| if (thissme < INT_MAX) { | |
| thissme = get_mvpred_compound_var_cost(ms_params, &tmp_best_mv); | |
| } | |
| if (thissme < bestsme) { | |
| bestsme = thissme; | |
| *best_mv = tmp_best_mv; | |
| } | |
| } | |
| } | |
| // Return cost list. | |
| if (cost_list) { | |
| if (USE_SAD_COSTLIST) { | |
| const int costlist_has_sad = 0; | |
| calc_int_sad_list(*best_mv, ms_params, cost_list, costlist_has_sad); | |
| } else { | |
| calc_int_cost_list(*best_mv, ms_params, cost_list); | |
| } | |
| } | |
| return bestsme; | |
| } | |
| // Exhaustive motion search around a given centre position with a given | |
| // step size. | |
| static int exhaustive_mesh_search(FULLPEL_MV start_mv, | |
| const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | |
| const int range, const int step, | |
| FULLPEL_MV *best_mv, | |
| FULLPEL_MV *second_best_mv) { | |
| const aom_variance_fn_ptr_t *vfp = ms_params->vfp; | |
| const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | |
| const struct buf_2d *const src = ms_params->ms_buffers.src; | |
| const struct buf_2d *const ref = ms_params->ms_buffers.ref; | |
| const int ref_stride = ref->stride; | |
| unsigned int best_sad = INT_MAX; | |
| int r, c, i; | |
| int start_col, end_col, start_row, end_row; | |
| int col_step = (step > 1) ? step : 4; | |
| assert(step >= 1); | |
| clamp_fullmv(&start_mv, &ms_params->mv_limits); | |
| *best_mv = start_mv; | |
| best_sad = get_mvpred_sad(ms_params, src, get_buf_from_mv(ref, &start_mv), | |
| ref_stride); | |
| best_sad += mvsad_err_cost_(&start_mv, mv_cost_params); | |
| start_row = AOMMAX(-range, ms_params->mv_limits.row_min - start_mv.row); | |
| start_col = AOMMAX(-range, ms_params->mv_limits.col_min - start_mv.col); | |
| end_row = AOMMIN(range, ms_params->mv_limits.row_max - start_mv.row); | |
| end_col = AOMMIN(range, ms_params->mv_limits.col_max - start_mv.col); | |
| for (r = start_row; r <= end_row; r += step) { | |
| for (c = start_col; c <= end_col; c += col_step) { | |
| // Step > 1 means we are not checking every location in this pass. | |
| if (step > 1) { | |
| const FULLPEL_MV mv = { start_mv.row + r, start_mv.col + c }; | |
| unsigned int sad = get_mvpred_sad( | |
| ms_params, src, get_buf_from_mv(ref, &mv), ref_stride); | |
| if (sad < best_sad) { | |
| sad += mvsad_err_cost_(&mv, mv_cost_params); | |
| if (sad < best_sad) { | |
| best_sad = sad; | |
| if (second_best_mv) { | |
| *second_best_mv = *best_mv; | |
| } | |
| *best_mv = mv; | |
| } | |
| } | |
| } else { | |
| // 4 sads in a single call if we are checking every location | |
| if (c + 3 <= end_col) { | |
| unsigned int sads[4]; | |
| const uint8_t *addrs[4]; | |
| for (i = 0; i < 4; ++i) { | |
| const FULLPEL_MV mv = { start_mv.row + r, start_mv.col + c + i }; | |
| addrs[i] = get_buf_from_mv(ref, &mv); | |
| } | |
| vfp->sdx4df(src->buf, src->stride, addrs, ref_stride, sads); | |
| for (i = 0; i < 4; ++i) { | |
| if (sads[i] < best_sad) { | |
| const FULLPEL_MV mv = { start_mv.row + r, start_mv.col + c + i }; | |
| const unsigned int sad = | |
| sads[i] + mvsad_err_cost_(&mv, mv_cost_params); | |
| if (sad < best_sad) { | |
| best_sad = sad; | |
| if (second_best_mv) { | |
| *second_best_mv = *best_mv; | |
| } | |
| *best_mv = mv; | |
| } | |
| } | |
| } | |
| } else { | |
| for (i = 0; i < end_col - c; ++i) { | |
| const FULLPEL_MV mv = { start_mv.row + r, start_mv.col + c + i }; | |
| unsigned int sad = get_mvpred_sad( | |
| ms_params, src, get_buf_from_mv(ref, &mv), ref_stride); | |
| if (sad < best_sad) { | |
| sad += mvsad_err_cost_(&mv, mv_cost_params); | |
| if (sad < best_sad) { | |
| best_sad = sad; | |
| if (second_best_mv) { | |
| *second_best_mv = *best_mv; | |
| } | |
| *best_mv = mv; | |
| } | |
| } | |
| } | |
| } | |
| } | |
| } | |
| } | |
| return best_sad; | |
| } | |
| // Runs an limited range exhaustive mesh search using a pattern set | |
| // according to the encode speed profile. | |
| static int full_pixel_exhaustive(const FULLPEL_MV start_mv, | |
| const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | |
| const struct MESH_PATTERN *const mesh_patterns, | |
| int *cost_list, FULLPEL_MV *best_mv, | |
| FULLPEL_MV *second_best_mv) { | |
| const int kMinRange = 7; | |
| const int kMaxRange = 256; | |
| const int kMinInterval = 1; | |
| int bestsme; | |
| int i; | |
| int interval = mesh_patterns[0].interval; | |
| int range = mesh_patterns[0].range; | |
| int baseline_interval_divisor; | |
| *best_mv = start_mv; | |
| // Trap illegal values for interval and range for this function. | |
| if ((range < kMinRange) || (range > kMaxRange) || (interval < kMinInterval) || | |
| (interval > range)) | |
| return INT_MAX; | |
| baseline_interval_divisor = range / interval; | |
| // Check size of proposed first range against magnitude of the centre | |
| // value used as a starting point. | |
| range = AOMMAX(range, (5 * AOMMAX(abs(best_mv->row), abs(best_mv->col))) / 4); | |
| range = AOMMIN(range, kMaxRange); | |
| interval = AOMMAX(interval, range / baseline_interval_divisor); | |
| // initial search | |
| bestsme = exhaustive_mesh_search(*best_mv, ms_params, range, interval, | |
| best_mv, second_best_mv); | |
| if ((interval > kMinInterval) && (range > kMinRange)) { | |
| // Progressive searches with range and step size decreasing each time | |
| // till we reach a step size of 1. Then break out. | |
| for (i = 1; i < MAX_MESH_STEP; ++i) { | |
| // First pass with coarser step and longer range | |
| bestsme = exhaustive_mesh_search( | |
| *best_mv, ms_params, mesh_patterns[i].range, | |
| mesh_patterns[i].interval, best_mv, second_best_mv); | |
| if (mesh_patterns[i].interval == 1) break; | |
| } | |
| } | |
| if (bestsme < INT_MAX) { | |
| bestsme = get_mvpred_var_cost(ms_params, best_mv); | |
| } | |
| // Return cost list. | |
| if (cost_list) { | |
| if (USE_SAD_COSTLIST) { | |
| const int costlist_has_sad = 0; | |
| calc_int_sad_list(*best_mv, ms_params, cost_list, costlist_has_sad); | |
| } else { | |
| calc_int_cost_list(*best_mv, ms_params, cost_list); | |
| } | |
| } | |
| return bestsme; | |
| } | |
| // This function is called when we do joint motion search in comp_inter_inter | |
| // mode, or when searching for one component of an ext-inter compound mode. | |
| int av1_refining_search_8p_c(MACROBLOCK *x, int error_per_bit, int search_range, | |
| const aom_variance_fn_ptr_t *fn_ptr, | |
| const uint8_t *mask, int mask_stride, | |
| int invert_mask, const MV *ref_mv, | |
| const uint8_t *second_pred, | |
| const struct buf_2d *src, | |
| const struct buf_2d *pre) { | |
| static const search_neighbors neighbors[8] = { | |
| { { -1, 0 }, -1 * SEARCH_GRID_STRIDE_8P + 0 }, | |
| { { 0, -1 }, 0 * SEARCH_GRID_STRIDE_8P - 1 }, | |
| { { 0, 1 }, 0 * SEARCH_GRID_STRIDE_8P + 1 }, | |
| { { 1, 0 }, 1 * SEARCH_GRID_STRIDE_8P + 0 }, | |
| { { -1, -1 }, -1 * SEARCH_GRID_STRIDE_8P - 1 }, | |
| { { 1, -1 }, 1 * SEARCH_GRID_STRIDE_8P - 1 }, | |
| { { -1, 1 }, -1 * SEARCH_GRID_STRIDE_8P + 1 }, | |
| { { 1, 1 }, 1 * SEARCH_GRID_STRIDE_8P + 1 } | |
| }; | |
| const struct buf_2d *const what = src; | |
| const struct buf_2d *const in_what = pre; | |
| const FULLPEL_MV full_ref_mv = get_fullmv_from_mv(ref_mv); | |
| FULLPEL_MV *best_mv = &x->best_mv.as_fullmv; | |
| unsigned int best_sad = INT_MAX; | |
| int i, j; | |
| uint8_t do_refine_search_grid[SEARCH_GRID_STRIDE_8P * | |
| SEARCH_GRID_STRIDE_8P] = { 0 }; | |
| int grid_center = SEARCH_GRID_CENTER_8P; | |
| int grid_coord = grid_center; | |
| clamp_fullmv(best_mv, &x->mv_limits); | |
| if (mask) { | |
| best_sad = fn_ptr->msdf(what->buf, what->stride, | |
| get_buf_from_mv(in_what, best_mv), in_what->stride, | |
| second_pred, mask, mask_stride, invert_mask) + | |
| mvsad_err_cost(best_mv, &full_ref_mv, x->nmv_vec_cost, | |
| CONVERT_TO_CONST_MVCOST(x->mv_cost_stack), | |
| error_per_bit, x->mv_cost_type); | |
| } else { | |
| best_sad = | |
| fn_ptr->sdaf(what->buf, what->stride, get_buf_from_mv(in_what, best_mv), | |
| in_what->stride, second_pred) + | |
| mvsad_err_cost(best_mv, &full_ref_mv, x->nmv_vec_cost, | |
| CONVERT_TO_CONST_MVCOST(x->mv_cost_stack), error_per_bit, | |
| x->mv_cost_type); | |
| } | |
| do_refine_search_grid[grid_coord] = 1; | |
| for (i = 0; i < search_range; ++i) { | |
| int best_site = -1; | |
| for (j = 0; j < 8; ++j) { | |
| grid_coord = grid_center + neighbors[j].coord_offset; | |
| if (do_refine_search_grid[grid_coord] == 1) { | |
| continue; | |
| } | |
| const FULLPEL_MV mv = { best_mv->row + neighbors[j].coord.row, | |
| best_mv->col + neighbors[j].coord.col }; | |
| do_refine_search_grid[grid_coord] = 1; | |
| if (av1_is_fullmv_in_range(&x->mv_limits, mv)) { | |
| unsigned int sad; | |
| if (mask) { | |
| sad = fn_ptr->msdf(what->buf, what->stride, | |
| get_buf_from_mv(in_what, &mv), in_what->stride, | |
| second_pred, mask, mask_stride, invert_mask); | |
| } else { | |
| sad = fn_ptr->sdaf(what->buf, what->stride, | |
| get_buf_from_mv(in_what, &mv), in_what->stride, | |
| second_pred); | |
| } | |
| if (sad < best_sad) { | |
| sad += mvsad_err_cost(&mv, &full_ref_mv, x->nmv_vec_cost, | |
| CONVERT_TO_CONST_MVCOST(x->mv_cost_stack), | |
| error_per_bit, x->mv_cost_type); | |
| if (sad < best_sad) { | |
| best_sad = sad; | |
| best_site = j; | |
| } | |
| } | |
| } | |
| } | |
| if (best_site == -1) { | |
| break; | |
| } else { | |
| best_mv->row += neighbors[best_site].coord.row; | |
| best_mv->col += neighbors[best_site].coord.col; | |
| grid_center += neighbors[best_site].coord_offset; | |
| } | |
| } | |
| return best_sad; | |
| } | |
| int av1_full_pixel_search(const FULLPEL_MV start_mv, | |
| const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | |
| const int step_param, int *cost_list, | |
| FULLPEL_MV *best_mv, FULLPEL_MV *second_best_mv) { | |
| const BLOCK_SIZE bsize = ms_params->bsize; | |
| const SEARCH_METHODS search_method = ms_params->search_method; | |
| const int is_intra_mode = ms_params->is_intra_mode; | |
| int run_mesh_search = ms_params->run_mesh_search; | |
| int var = 0; | |
| assert(ms_params->ms_buffers.second_pred == NULL && | |
| ms_params->ms_buffers.mask == NULL && | |
| "av1_full_pixel_search does not support compound pred"); | |
| if (cost_list) { | |
| cost_list[0] = INT_MAX; | |
| cost_list[1] = INT_MAX; | |
| cost_list[2] = INT_MAX; | |
| cost_list[3] = INT_MAX; | |
| cost_list[4] = INT_MAX; | |
| } | |
| switch (search_method) { | |
| case FAST_DIAMOND: | |
| var = fast_dia_search(start_mv, ms_params, step_param, 0, cost_list, | |
| best_mv); | |
| break; | |
| case FAST_HEX: | |
| var = fast_hex_search(start_mv, ms_params, step_param, 0, cost_list, | |
| best_mv); | |
| break; | |
| case HEX: | |
| var = hex_search(start_mv, ms_params, step_param, 1, cost_list, best_mv); | |
| break; | |
| case SQUARE: | |
| var = | |
| square_search(start_mv, ms_params, step_param, 1, cost_list, best_mv); | |
| break; | |
| case BIGDIA: | |
| var = | |
| bigdia_search(start_mv, ms_params, step_param, 1, cost_list, best_mv); | |
| break; | |
| case NSTEP: | |
| case DIAMOND: | |
| var = full_pixel_diamond(start_mv, ms_params, step_param, cost_list, | |
| best_mv, second_best_mv); | |
| break; | |
| default: assert(0 && "Invalid search method."); | |
| } | |
| // Should we allow a follow on exhaustive search? | |
| if (!run_mesh_search && search_method == NSTEP) { | |
| int exhuastive_thr = ms_params->force_mesh_thresh; | |
| exhuastive_thr >>= | |
| 10 - (mi_size_wide_log2[bsize] + mi_size_high_log2[bsize]); | |
| // Threshold variance for an exhaustive full search. | |
| if (var > exhuastive_thr) run_mesh_search = 1; | |
| } | |
| // TODO(yunqing): the following is used to reduce mesh search in temporal | |
| // filtering. Can extend it to intrabc. | |
| if (!is_intra_mode && ms_params->prune_mesh_search) { | |
| const int full_pel_mv_diff = AOMMAX(abs(start_mv.row - best_mv->row), | |
| abs(start_mv.col - best_mv->col)); | |
| if (full_pel_mv_diff <= 4) { | |
| run_mesh_search = 0; | |
| } | |
| } | |
| if (run_mesh_search) { | |
| int var_ex; | |
| FULLPEL_MV tmp_mv_ex; | |
| // Pick the mesh pattern for exhaustive search based on the toolset (intraBC | |
| // or non-intraBC) | |
| // TODO(chiyotsai@google.com): There is a bug here where the second best mv | |
| // gets overwritten without actually comparing the rdcost. | |
| const MESH_PATTERN *const mesh_patterns = | |
| ms_params->mesh_patterns[is_intra_mode]; | |
| // TODO(chiyotsai@google.com): the second best mv is not set correctly by | |
| // full_pixel_exhaustive, which can incorrectly override it. | |
| var_ex = full_pixel_exhaustive(*best_mv, ms_params, mesh_patterns, | |
| cost_list, &tmp_mv_ex, second_best_mv); | |
| if (var_ex < var) { | |
| var = var_ex; | |
| *best_mv = tmp_mv_ex; | |
| } | |
| } | |
| return var; | |
| } | |
| void av1_intrabc_hash_search(const AV1_COMP *cpi, MACROBLOCK *x, | |
| BLOCK_SIZE bsize, const MV *ref_mv, int *bestsme, | |
| FULLPEL_MV *best_mv) { | |
| if (!av1_use_hash_me(cpi)) return; | |
| const aom_variance_fn_ptr_t *fn_ptr = &cpi->fn_ptr[bsize]; | |
| const int block_height = block_size_high[bsize]; | |
| const int block_width = block_size_wide[bsize]; | |
| const int mi_row = x->e_mbd.mi_row; | |
| const int mi_col = x->e_mbd.mi_col; | |
| const int x_pos = mi_col * MI_SIZE; | |
| const int y_pos = mi_row * MI_SIZE; | |
| if (block_height == block_width) { | |
| uint8_t *what = x->plane[0].src.buf; | |
| const int what_stride = x->plane[0].src.stride; | |
| uint32_t hash_value1, hash_value2; | |
| FULLPEL_MV best_hash_mv; | |
| int best_hash_cost = INT_MAX; | |
| // for the hashMap | |
| hash_table *ref_frame_hash = &x->intrabc_hash_table; | |
| av1_get_block_hash_value(what, what_stride, block_width, &hash_value1, | |
| &hash_value2, is_cur_buf_hbd(&x->e_mbd), x); | |
| const int count = av1_hash_table_count(ref_frame_hash, hash_value1); | |
| // for intra, at lest one matching can be found, itself. | |
| if (count <= 1) { | |
| return; | |
| } | |
| Iterator iterator = | |
| av1_hash_get_first_iterator(ref_frame_hash, hash_value1); | |
| for (int i = 0; i < count; i++, aom_iterator_increment(&iterator)) { | |
| block_hash ref_block_hash = *(block_hash *)(aom_iterator_get(&iterator)); | |
| if (hash_value2 == ref_block_hash.hash_value2) { | |
| // Make sure the prediction is from valid area. | |
| const MV dv = { GET_MV_SUBPEL(ref_block_hash.y - y_pos), | |
| GET_MV_SUBPEL(ref_block_hash.x - x_pos) }; | |
| if (!av1_is_dv_valid(dv, &cpi->common, &x->e_mbd, mi_row, mi_col, bsize, | |
| cpi->common.seq_params.mib_size_log2)) | |
| continue; | |
| FULLPEL_MV hash_mv; | |
| hash_mv.col = ref_block_hash.x - x_pos; | |
| hash_mv.row = ref_block_hash.y - y_pos; | |
| if (!av1_is_fullmv_in_range(&x->mv_limits, hash_mv)) continue; | |
| const int refCost = av1_get_mvpred_var(x, &hash_mv, ref_mv, fn_ptr); | |
| if (refCost < best_hash_cost) { | |
| best_hash_cost = refCost; | |
| best_hash_mv = hash_mv; | |
| } | |
| } | |
| } | |
| if (best_hash_cost < *bestsme) { | |
| *best_mv = best_hash_mv; | |
| *bestsme = best_hash_cost; | |
| } | |
| } | |
| } | |
| static int vector_match(int16_t *ref, int16_t *src, int bwl) { | |
| int best_sad = INT_MAX; | |
| int this_sad; | |
| int d; | |
| int center, offset = 0; | |
| int bw = 4 << bwl; // redundant variable, to be changed in the experiments. | |
| for (d = 0; d <= bw; d += 16) { | |
| this_sad = aom_vector_var(&ref[d], src, bwl); | |
| if (this_sad < best_sad) { | |
| best_sad = this_sad; | |
| offset = d; | |
| } | |
| } | |
| center = offset; | |
| for (d = -8; d <= 8; d += 16) { | |
| int this_pos = offset + d; | |
| // check limit | |
| if (this_pos < 0 || this_pos > bw) continue; | |
| this_sad = aom_vector_var(&ref[this_pos], src, bwl); | |
| if (this_sad < best_sad) { | |
| best_sad = this_sad; | |
| center = this_pos; | |
| } | |
| } | |
| offset = center; | |
| for (d = -4; d <= 4; d += 8) { | |
| int this_pos = offset + d; | |
| // check limit | |
| if (this_pos < 0 || this_pos > bw) continue; | |
| this_sad = aom_vector_var(&ref[this_pos], src, bwl); | |
| if (this_sad < best_sad) { | |
| best_sad = this_sad; | |
| center = this_pos; | |
| } | |
| } | |
| offset = center; | |
| for (d = -2; d <= 2; d += 4) { | |
| int this_pos = offset + d; | |
| // check limit | |
| if (this_pos < 0 || this_pos > bw) continue; | |
| this_sad = aom_vector_var(&ref[this_pos], src, bwl); | |
| if (this_sad < best_sad) { | |
| best_sad = this_sad; | |
| center = this_pos; | |
| } | |
| } | |
| offset = center; | |
| for (d = -1; d <= 1; d += 2) { | |
| int this_pos = offset + d; | |
| // check limit | |
| if (this_pos < 0 || this_pos > bw) continue; | |
| this_sad = aom_vector_var(&ref[this_pos], src, bwl); | |
| if (this_sad < best_sad) { | |
| best_sad = this_sad; | |
| center = this_pos; | |
| } | |
| } | |
| return (center - (bw >> 1)); | |
| } | |
| // A special fast version of motion search used in rt mode | |
| unsigned int av1_int_pro_motion_estimation(const AV1_COMP *cpi, MACROBLOCK *x, | |
| BLOCK_SIZE bsize, int mi_row, | |
| int mi_col, const MV *ref_mv) { | |
| MACROBLOCKD *xd = &x->e_mbd; | |
| MB_MODE_INFO *mi = xd->mi[0]; | |
| struct buf_2d backup_yv12[MAX_MB_PLANE] = { { 0, 0, 0, 0, 0 } }; | |
| DECLARE_ALIGNED(16, int16_t, hbuf[256]); | |
| DECLARE_ALIGNED(16, int16_t, vbuf[256]); | |
| DECLARE_ALIGNED(16, int16_t, src_hbuf[128]); | |
| DECLARE_ALIGNED(16, int16_t, src_vbuf[128]); | |
| int idx; | |
| const int bw = 4 << mi_size_wide_log2[bsize]; | |
| const int bh = 4 << mi_size_high_log2[bsize]; | |
| const int search_width = bw << 1; | |
| const int search_height = bh << 1; | |
| const int src_stride = x->plane[0].src.stride; | |
| const int ref_stride = xd->plane[0].pre[0].stride; | |
| uint8_t const *ref_buf, *src_buf; | |
| int_mv *best_int_mv = &xd->mi[0]->mv[0]; | |
| unsigned int best_sad, tmp_sad, this_sad[4]; | |
| const int norm_factor = 3 + (bw >> 5); | |
| const YV12_BUFFER_CONFIG *scaled_ref_frame = | |
| av1_get_scaled_ref_frame(cpi, mi->ref_frame[0]); | |
| static const MV search_pos[4] = { | |
| { -1, 0 }, | |
| { 0, -1 }, | |
| { 0, 1 }, | |
| { 1, 0 }, | |
| }; | |
| if (scaled_ref_frame) { | |
| int i; | |
| // Swap out the reference frame for a version that's been scaled to | |
| // match the resolution of the current frame, allowing the existing | |
| // motion search code to be used without additional modifications. | |
| for (i = 0; i < MAX_MB_PLANE; i++) backup_yv12[i] = xd->plane[i].pre[0]; | |
| av1_setup_pre_planes(xd, 0, scaled_ref_frame, mi_row, mi_col, NULL, | |
| MAX_MB_PLANE); | |
| } | |
| if (xd->bd != 8) { | |
| unsigned int sad; | |
| best_int_mv->as_fullmv = kZeroFullMv; | |
| sad = cpi->fn_ptr[bsize].sdf(x->plane[0].src.buf, src_stride, | |
| xd->plane[0].pre[0].buf, ref_stride); | |
| if (scaled_ref_frame) { | |
| int i; | |
| for (i = 0; i < MAX_MB_PLANE; i++) xd->plane[i].pre[0] = backup_yv12[i]; | |
| } | |
| return sad; | |
| } | |
| // Set up prediction 1-D reference set | |
| ref_buf = xd->plane[0].pre[0].buf - (bw >> 1); | |
| for (idx = 0; idx < search_width; idx += 16) { | |
| aom_int_pro_row(&hbuf[idx], ref_buf, ref_stride, bh); | |
| ref_buf += 16; | |
| } | |
| ref_buf = xd->plane[0].pre[0].buf - (bh >> 1) * ref_stride; | |
| for (idx = 0; idx < search_height; ++idx) { | |
| vbuf[idx] = aom_int_pro_col(ref_buf, bw) >> norm_factor; | |
| ref_buf += ref_stride; | |
| } | |
| // Set up src 1-D reference set | |
| for (idx = 0; idx < bw; idx += 16) { | |
| src_buf = x->plane[0].src.buf + idx; | |
| aom_int_pro_row(&src_hbuf[idx], src_buf, src_stride, bh); | |
| } | |
| src_buf = x->plane[0].src.buf; | |
| for (idx = 0; idx < bh; ++idx) { | |
| src_vbuf[idx] = aom_int_pro_col(src_buf, bw) >> norm_factor; | |
| src_buf += src_stride; | |
| } | |
| // Find the best match per 1-D search | |
| best_int_mv->as_fullmv.col = | |
| vector_match(hbuf, src_hbuf, mi_size_wide_log2[bsize]); | |
| best_int_mv->as_fullmv.row = | |
| vector_match(vbuf, src_vbuf, mi_size_high_log2[bsize]); | |
| FULLPEL_MV this_mv = best_int_mv->as_fullmv; | |
| src_buf = x->plane[0].src.buf; | |
| ref_buf = get_buf_from_mv(&xd->plane[0].pre[0], &this_mv); | |
| best_sad = cpi->fn_ptr[bsize].sdf(src_buf, src_stride, ref_buf, ref_stride); | |
| { | |
| const uint8_t *const pos[4] = { | |
| ref_buf - ref_stride, | |
| ref_buf - 1, | |
| ref_buf + 1, | |
| ref_buf + ref_stride, | |
| }; | |
| cpi->fn_ptr[bsize].sdx4df(src_buf, src_stride, pos, ref_stride, this_sad); | |
| } | |
| for (idx = 0; idx < 4; ++idx) { | |
| if (this_sad[idx] < best_sad) { | |
| best_sad = this_sad[idx]; | |
| best_int_mv->as_fullmv.row = search_pos[idx].row + this_mv.row; | |
| best_int_mv->as_fullmv.col = search_pos[idx].col + this_mv.col; | |
| } | |
| } | |
| if (this_sad[0] < this_sad[3]) | |
| this_mv.row -= 1; | |
| else | |
| this_mv.row += 1; | |
| if (this_sad[1] < this_sad[2]) | |
| this_mv.col -= 1; | |
| else | |
| this_mv.col += 1; | |
| ref_buf = get_buf_from_mv(&xd->plane[0].pre[0], &this_mv); | |
| tmp_sad = cpi->fn_ptr[bsize].sdf(src_buf, src_stride, ref_buf, ref_stride); | |
| if (best_sad > tmp_sad) { | |
| best_int_mv->as_fullmv = this_mv; | |
| best_sad = tmp_sad; | |
| } | |
| convert_fullmv_to_mv(best_int_mv); | |
| SubpelMvLimits subpel_mv_limits; | |
| av1_set_subpel_mv_search_range(&subpel_mv_limits, &x->mv_limits, ref_mv); | |
| clamp_mv(&best_int_mv->as_mv, &subpel_mv_limits); | |
| if (scaled_ref_frame) { | |
| int i; | |
| for (i = 0; i < MAX_MB_PLANE; i++) xd->plane[i].pre[0] = backup_yv12[i]; | |
| } | |
| return best_sad; | |
| } | |
| // ============================================================================= | |
| // Fullpixel Motion Search: OBMC | |
| // ============================================================================= | |
| static INLINE int get_obmc_mvpred_var( | |
| const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, const FULLPEL_MV *this_mv) { | |
| const aom_variance_fn_ptr_t *vfp = ms_params->vfp; | |
| const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | |
| const MSBuffers *ms_buffers = &ms_params->ms_buffers; | |
| const int32_t *wsrc = ms_buffers->wsrc; | |
| const int32_t *mask = ms_buffers->obmc_mask; | |
| const struct buf_2d *ref_buf = ms_buffers->ref; | |
| const MV mv = get_mv_from_fullmv(this_mv); | |
| unsigned int unused; | |
| return vfp->ovf(get_buf_from_mv(ref_buf, this_mv), ref_buf->stride, wsrc, | |
| mask, &unused) + | |
| mv_err_cost_(&mv, mv_cost_params); | |
| } | |
| static int obmc_refining_search_sad( | |
| const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, FULLPEL_MV *best_mv) { | |
| const aom_variance_fn_ptr_t *fn_ptr = ms_params->vfp; | |
| const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | |
| const MSBuffers *ms_buffers = &ms_params->ms_buffers; | |
| const int32_t *wsrc = ms_buffers->wsrc; | |
| const int32_t *mask = ms_buffers->obmc_mask; | |
| const struct buf_2d *ref_buf = ms_buffers->ref; | |
| const FULLPEL_MV neighbors[4] = { { -1, 0 }, { 0, -1 }, { 0, 1 }, { 1, 0 } }; | |
| const int kSearchRange = 8; | |
| unsigned int best_sad = fn_ptr->osdf(get_buf_from_mv(ref_buf, best_mv), | |
| ref_buf->stride, wsrc, mask) + | |
| mvsad_err_cost_(best_mv, mv_cost_params); | |
| for (int i = 0; i < kSearchRange; i++) { | |
| int best_site = -1; | |
| for (int j = 0; j < 4; j++) { | |
| const FULLPEL_MV mv = { best_mv->row + neighbors[j].row, | |
| best_mv->col + neighbors[j].col }; | |
| if (av1_is_fullmv_in_range(&ms_params->mv_limits, mv)) { | |
| unsigned int sad = fn_ptr->osdf(get_buf_from_mv(ref_buf, &mv), | |
| ref_buf->stride, wsrc, mask); | |
| if (sad < best_sad) { | |
| sad += mvsad_err_cost_(&mv, mv_cost_params); | |
| if (sad < best_sad) { | |
| best_sad = sad; | |
| best_site = j; | |
| } | |
| } | |
| } | |
| } | |
| if (best_site == -1) { | |
| break; | |
| } else { | |
| best_mv->row += neighbors[best_site].row; | |
| best_mv->col += neighbors[best_site].col; | |
| } | |
| } | |
| return best_sad; | |
| } | |
| static int obmc_diamond_search_sad( | |
| const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, FULLPEL_MV start_mv, | |
| FULLPEL_MV *best_mv, int search_param, int *num00) { | |
| const aom_variance_fn_ptr_t *fn_ptr = ms_params->vfp; | |
| const search_site_config *cfg = ms_params->search_sites; | |
| const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | |
| const MSBuffers *ms_buffers = &ms_params->ms_buffers; | |
| const int32_t *wsrc = ms_buffers->wsrc; | |
| const int32_t *mask = ms_buffers->obmc_mask; | |
| const struct buf_2d *const ref_buf = ms_buffers->ref; | |
| // search_param determines the length of the initial step and hence the number | |
| // of iterations | |
| // 0 = initial step (MAX_FIRST_STEP) pel : 1 = (MAX_FIRST_STEP/2) pel, 2 = | |
| // (MAX_FIRST_STEP/4) pel... etc. | |
| const int tot_steps = MAX_MVSEARCH_STEPS - 1 - search_param; | |
| const uint8_t *best_address, *init_ref; | |
| int best_sad = INT_MAX; | |
| int best_site = 0; | |
| int step; | |
| clamp_fullmv(&start_mv, &ms_params->mv_limits); | |
| best_address = init_ref = get_buf_from_mv(ref_buf, &start_mv); | |
| *num00 = 0; | |
| *best_mv = start_mv; | |
| // Check the starting position | |
| best_sad = fn_ptr->osdf(best_address, ref_buf->stride, wsrc, mask) + | |
| mvsad_err_cost_(best_mv, mv_cost_params); | |
| for (step = tot_steps; step >= 0; --step) { | |
| const search_site *const ss = cfg->ss[step]; | |
| best_site = 0; | |
| for (int idx = 1; idx <= cfg->searches_per_step[step]; ++idx) { | |
| const FULLPEL_MV mv = { best_mv->row + ss[idx].mv.row, | |
| best_mv->col + ss[idx].mv.col }; | |
| if (av1_is_fullmv_in_range(&ms_params->mv_limits, mv)) { | |
| int sad = fn_ptr->osdf(best_address + ss[idx].offset, ref_buf->stride, | |
| wsrc, mask); | |
| if (sad < best_sad) { | |
| sad += mvsad_err_cost_(&mv, mv_cost_params); | |
| if (sad < best_sad) { | |
| best_sad = sad; | |
| best_site = idx; | |
| } | |
| } | |
| } | |
| } | |
| if (best_site != 0) { | |
| best_mv->row += ss[best_site].mv.row; | |
| best_mv->col += ss[best_site].mv.col; | |
| best_address += ss[best_site].offset; | |
| } else if (best_address == init_ref) { | |
| (*num00)++; | |
| } | |
| } | |
| return best_sad; | |
| } | |
| static int obmc_full_pixel_diamond( | |
| const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, const FULLPEL_MV start_mv, | |
| int step_param, int do_refine, FULLPEL_MV *best_mv) { | |
| const search_site_config *cfg = ms_params->search_sites; | |
| FULLPEL_MV tmp_mv; | |
| int thissme, n, num00 = 0; | |
| int bestsme = | |
| obmc_diamond_search_sad(ms_params, start_mv, &tmp_mv, step_param, &n); | |
| if (bestsme < INT_MAX) bestsme = get_obmc_mvpred_var(ms_params, &tmp_mv); | |
| *best_mv = tmp_mv; | |
| // If there won't be more n-step search, check to see if refining search is | |
| // needed. | |
| const int further_steps = cfg->ss_count - 1 - step_param; | |
| if (n > further_steps) do_refine = 0; | |
| while (n < further_steps) { | |
| ++n; | |
| if (num00) { | |
| num00--; | |
| } else { | |
| thissme = obmc_diamond_search_sad(ms_params, start_mv, &tmp_mv, | |
| step_param + n, &num00); | |
| if (thissme < INT_MAX) thissme = get_obmc_mvpred_var(ms_params, &tmp_mv); | |
| // check to see if refining search is needed. | |
| if (num00 > further_steps - n) do_refine = 0; | |
| if (thissme < bestsme) { | |
| bestsme = thissme; | |
| *best_mv = tmp_mv; | |
| } | |
| } | |
| } | |
| // final 1-away diamond refining search | |
| if (do_refine) { | |
| tmp_mv = *best_mv; | |
| thissme = obmc_refining_search_sad(ms_params, &tmp_mv); | |
| if (thissme < INT_MAX) thissme = get_obmc_mvpred_var(ms_params, &tmp_mv); | |
| if (thissme < bestsme) { | |
| bestsme = thissme; | |
| *best_mv = tmp_mv; | |
| } | |
| } | |
| return bestsme; | |
| } | |
| int av1_obmc_full_pixel_search(const FULLPEL_MV start_mv, | |
| const FULLPEL_MOTION_SEARCH_PARAMS *ms_params, | |
| const int step_param, FULLPEL_MV *best_mv) { | |
| if (!ms_params->fast_obmc_search) { | |
| const int do_refine = 1; | |
| const int bestsme = obmc_full_pixel_diamond(ms_params, start_mv, step_param, | |
| do_refine, best_mv); | |
| return bestsme; | |
| } else { | |
| *best_mv = start_mv; | |
| clamp_fullmv(best_mv, &ms_params->mv_limits); | |
| int thissme = obmc_refining_search_sad(ms_params, best_mv); | |
| if (thissme < INT_MAX) thissme = get_obmc_mvpred_var(ms_params, best_mv); | |
| return thissme; | |
| } | |
| } | |
| // ============================================================================= | |
| // Subpixel Motion Search: Translational | |
| // ============================================================================= | |
| #define INIT_SUBPEL_STEP_SIZE (4) | |
| /* | |
| * To avoid the penalty for crossing cache-line read, preload the reference | |
| * area in a small buffer, which is aligned to make sure there won't be crossing | |
| * cache-line read while reading from this buffer. This reduced the cpu | |
| * cycles spent on reading ref data in sub-pixel filter functions. | |
| * TODO: Currently, since sub-pixel search range here is -3 ~ 3, copy 22 rows x | |
| * 32 cols area that is enough for 16x16 macroblock. Later, for SPLITMV, we | |
| * could reduce the area. | |
| */ | |
| // Returns the subpel offset used by various subpel variance functions [m]sv[a]f | |
| static INLINE int sp(int x) { return x & 7; } | |
| // Gets the address of the ref buffer at subpel location (r, c), rounded to the | |
| // nearest fullpel precision toward - \infty | |
| static INLINE const uint8_t *pre(const uint8_t *buf, int stride, int r, int c) { | |
| const int offset = (r >> 3) * stride + (c >> 3); | |
| return buf + offset; | |
| } | |
| // Estimates the variance of prediction residue using bilinear filter for fast | |
| // search. | |
| static INLINE int estimated_pref_error( | |
| const MV *this_mv, const uint8_t *src, const int src_stride, | |
| const uint8_t *ref, int ref_stride, | |
| const SUBPEL_SEARCH_VAR_PARAMS *var_params, unsigned int *sse) { | |
| const aom_variance_fn_ptr_t *vfp = var_params->vfp; | |
| const uint8_t *second_pred = var_params->second_pred; | |
| const uint8_t *mask = var_params->mask; | |
| const int mask_stride = var_params->mask_stride; | |
| const int invert_mask = var_params->invert_mask; | |
| const int r = this_mv->row; | |
| const int c = this_mv->col; | |
| if (second_pred == NULL) { | |
| return vfp->svf(pre(ref, ref_stride, r, c), ref_stride, sp(c), sp(r), src, | |
| src_stride, sse); | |
| } else if (mask) { | |
| return vfp->msvf(pre(ref, ref_stride, r, c), ref_stride, sp(c), sp(r), src, | |
| src_stride, second_pred, mask, mask_stride, invert_mask, | |
| sse); | |
| } else { | |
| return vfp->svaf(pre(ref, ref_stride, r, c), ref_stride, sp(c), sp(r), src, | |
| src_stride, sse, second_pred); | |
| } | |
| } | |
| // Calculates the variance of prediction residue. | |
| static int upsampled_pref_error(MACROBLOCKD *xd, const AV1_COMMON *cm, | |
| const MV *this_mv, const uint8_t *src, | |
| int src_stride, const uint8_t *ref, | |
| int ref_stride, | |
| const SUBPEL_SEARCH_VAR_PARAMS *var_params, | |
| unsigned int *sse) { | |
| const aom_variance_fn_ptr_t *vfp = var_params->vfp; | |
| const SUBPEL_SEARCH_TYPE subpel_search_type = var_params->subpel_search_type; | |
| const uint8_t *second_pred = var_params->second_pred; | |
| const uint8_t *mask = var_params->mask; | |
| const int mask_stride = var_params->mask_stride; | |
| const int invert_mask = var_params->invert_mask; | |
| const int w = var_params->w; | |
| const int h = var_params->h; | |
| const int mi_row = xd->mi_row; | |
| const int mi_col = xd->mi_col; | |
| const int subpel_x_q3 = sp(this_mv->col); | |
| const int subpel_y_q3 = sp(this_mv->row); | |
| ref = pre(ref, ref_stride, this_mv->row, this_mv->col); | |
| unsigned int besterr; | |
| #if CONFIG_AV1_HIGHBITDEPTH | |
| if (is_cur_buf_hbd(xd)) { | |
| DECLARE_ALIGNED(16, uint16_t, pred16[MAX_SB_SQUARE]); | |
| uint8_t *pred8 = CONVERT_TO_BYTEPTR(pred16); | |
| if (second_pred != NULL) { | |
| if (mask) { | |
| aom_highbd_comp_mask_upsampled_pred( | |
| xd, cm, mi_row, mi_col, this_mv, pred8, second_pred, w, h, | |
| subpel_x_q3, subpel_y_q3, ref, ref_stride, mask, mask_stride, | |
| invert_mask, xd->bd, subpel_search_type); | |
| } else { | |
| aom_highbd_comp_avg_upsampled_pred( | |
| xd, cm, mi_row, mi_col, this_mv, pred8, second_pred, w, h, | |
| subpel_x_q3, subpel_y_q3, ref, ref_stride, xd->bd, | |
| subpel_search_type); | |
| } | |
| } else { | |
| aom_highbd_upsampled_pred(xd, cm, mi_row, mi_col, this_mv, pred8, w, h, | |
| subpel_x_q3, subpel_y_q3, ref, ref_stride, | |
| xd->bd, subpel_search_type); | |
| } | |
| besterr = vfp->vf(pred8, w, src, src_stride, sse); | |
| } else { | |
| DECLARE_ALIGNED(16, uint8_t, pred[MAX_SB_SQUARE]); | |
| if (second_pred != NULL) { | |
| if (mask) { | |
| aom_comp_mask_upsampled_pred( | |
| xd, cm, mi_row, mi_col, this_mv, pred, second_pred, w, h, | |
| subpel_x_q3, subpel_y_q3, ref, ref_stride, mask, mask_stride, | |
| invert_mask, subpel_search_type); | |
| } else { | |
| aom_comp_avg_upsampled_pred(xd, cm, mi_row, mi_col, this_mv, pred, | |
| second_pred, w, h, subpel_x_q3, subpel_y_q3, | |
| ref, ref_stride, subpel_search_type); | |
| } | |
| } else { | |
| aom_upsampled_pred(xd, cm, mi_row, mi_col, this_mv, pred, w, h, | |
| subpel_x_q3, subpel_y_q3, ref, ref_stride, | |
| subpel_search_type); | |
| } | |
| besterr = vfp->vf(pred, w, src, src_stride, sse); | |
| } | |
| #else | |
| DECLARE_ALIGNED(16, uint8_t, pred[MAX_SB_SQUARE]); | |
| if (second_pred != NULL) { | |
| if (mask) { | |
| aom_comp_mask_upsampled_pred(xd, cm, mi_row, mi_col, this_mv, pred, | |
| second_pred, w, h, subpel_x_q3, subpel_y_q3, | |
| ref, ref_stride, mask, mask_stride, | |
| invert_mask, subpel_search_type); | |
| } else { | |
| aom_comp_avg_upsampled_pred(xd, cm, mi_row, mi_col, this_mv, pred, | |
| second_pred, w, h, subpel_x_q3, subpel_y_q3, | |
| ref, ref_stride, subpel_search_type); | |
| } | |
| } else { | |
| aom_upsampled_pred(xd, cm, mi_row, mi_col, this_mv, pred, w, h, subpel_x_q3, | |
| subpel_y_q3, ref, ref_stride, subpel_search_type); | |
| } | |
| besterr = vfp->vf(pred, w, src, src_stride, sse); | |
| #endif | |
| return besterr; | |
| } | |
| // Estimates whether this_mv is better than best_mv. This function incorporates | |
| // both prediction error and residue into account. It is suffixed "fast" because | |
| // it uses bilinear filter to estimate the prediction. | |
| static INLINE unsigned int check_better_fast( | |
| const MV *this_mv, MV *best_mv, const SubpelMvLimits *mv_limits, | |
| const uint8_t *const src, const int src_stride, const uint8_t *const ref, | |
| int ref_stride, const SUBPEL_SEARCH_VAR_PARAMS *var_params, | |
| const MV_COST_PARAMS *mv_cost_params, unsigned int *besterr, | |
| unsigned int *sse1, int *distortion, int *has_better_mv) { | |
| unsigned int cost; | |
| if (av1_is_subpelmv_in_range(mv_limits, *this_mv)) { | |
| unsigned int sse; | |
| int thismse = estimated_pref_error(this_mv, src, src_stride, ref, | |
| ref_stride, var_params, &sse); | |
| cost = mv_err_cost_(this_mv, mv_cost_params); | |
| cost += thismse; | |
| if (cost < *besterr) { | |
| *besterr = cost; | |
| *best_mv = *this_mv; | |
| *distortion = thismse; | |
| *sse1 = sse; | |
| *has_better_mv |= 1; | |
| } | |
| } else { | |
| cost = INT_MAX; | |
| } | |
| return cost; | |
| } | |
| // Checks whether this_mv is better than best_mv. This function incorporates | |
| // both prediction error and residue into account. | |
| static AOM_FORCE_INLINE unsigned int check_better( | |
| MACROBLOCKD *xd, const AV1_COMMON *cm, const MV *this_mv, MV *best_mv, | |
| const SubpelMvLimits *mv_limits, const uint8_t *const src, | |
| const int src_stride, const uint8_t *const ref, int ref_stride, | |
| const SUBPEL_SEARCH_VAR_PARAMS *var_params, | |
| const MV_COST_PARAMS *mv_cost_params, unsigned int *besterr, | |
| unsigned int *sse1, int *distortion, int *is_better) { | |
| unsigned int cost; | |
| if (av1_is_subpelmv_in_range(mv_limits, *this_mv)) { | |
| unsigned int sse; | |
| int thismse; | |
| thismse = upsampled_pref_error(xd, cm, this_mv, src, src_stride, ref, | |
| ref_stride, var_params, &sse); | |
| cost = mv_err_cost_(this_mv, mv_cost_params); | |
| cost += thismse; | |
| if (cost < *besterr) { | |
| *besterr = cost; | |
| *best_mv = *this_mv; | |
| *distortion = thismse; | |
| *sse1 = sse; | |
| *is_better |= 1; | |
| } | |
| } else { | |
| cost = INT_MAX; | |
| } | |
| return cost; | |
| } | |
| static INLINE MV get_best_diag_step(int step_size, unsigned int left_cost, | |
| unsigned int right_cost, | |
| unsigned int up_cost, | |
| unsigned int down_cost) { | |
| const MV diag_step = { up_cost <= down_cost ? -step_size : step_size, | |
| left_cost <= right_cost ? -step_size : step_size }; | |
| return diag_step; | |
| } | |
| // Searches the four cardinal direction for a better mv, then follows up with a | |
| // search in the best quadrant. This uses bilinear filter to speed up the | |
| // calculation. | |
| static AOM_FORCE_INLINE MV first_level_check_fast( | |
| const MV this_mv, MV *best_mv, int hstep, const SubpelMvLimits *mv_limits, | |
| const uint8_t *const src, const int src_stride, const uint8_t *const ref, | |
| int ref_stride, const SUBPEL_SEARCH_VAR_PARAMS *var_params, | |
| const MV_COST_PARAMS *mv_cost_params, unsigned int *besterr, | |
| unsigned int *sse1, int *distortion) { | |
| // Check the four cardinal directions | |
| const MV left_mv = { this_mv.row, this_mv.col - hstep }; | |
| int dummy = 0; | |
| const unsigned int left = check_better_fast( | |
| &left_mv, best_mv, mv_limits, src, src_stride, ref, ref_stride, | |
| var_params, mv_cost_params, besterr, sse1, distortion, &dummy); | |
| const MV right_mv = { this_mv.row, this_mv.col + hstep }; | |
| const unsigned int right = check_better_fast( | |
| &right_mv, best_mv, mv_limits, src, src_stride, ref, ref_stride, | |
| var_params, mv_cost_params, besterr, sse1, distortion, &dummy); | |
| const MV top_mv = { this_mv.row - hstep, this_mv.col }; | |
| const unsigned int up = check_better_fast( | |
| &top_mv, best_mv, mv_limits, src, src_stride, ref, ref_stride, var_params, | |
| mv_cost_params, besterr, sse1, distortion, &dummy); | |
| const MV bottom_mv = { this_mv.row + hstep, this_mv.col }; | |
| const unsigned int down = check_better_fast( | |
| &bottom_mv, best_mv, mv_limits, src, src_stride, ref, ref_stride, | |
| var_params, mv_cost_params, besterr, sse1, distortion, &dummy); | |
| const MV diag_step = get_best_diag_step(hstep, left, right, up, down); | |
| const MV diag_mv = { this_mv.row + diag_step.row, | |
| this_mv.col + diag_step.col }; | |
| // Check the diagonal direction with the best mv | |
| check_better_fast(&diag_mv, best_mv, mv_limits, src, src_stride, ref, | |
| ref_stride, var_params, mv_cost_params, besterr, sse1, | |
| distortion, &dummy); | |
| return diag_step; | |
| } | |
| // Performs a following up search after first_level_check_fast is called. This | |
| // performs two extra chess pattern searches in the best quadrant. | |
| static AOM_FORCE_INLINE void second_level_check_fast( | |
| const MV this_mv, const MV diag_step, MV *best_mv, int hstep, | |
| const SubpelMvLimits *mv_limits, const uint8_t *const src, | |
| const int src_stride, const uint8_t *const ref, int ref_stride, | |
| const SUBPEL_SEARCH_VAR_PARAMS *var_params, | |
| const MV_COST_PARAMS *mv_cost_params, unsigned int *besterr, | |
| unsigned int *sse1, int *distortion) { | |
| assert(diag_step.row == hstep || diag_step.row == -hstep); | |
| assert(diag_step.col == hstep || diag_step.col == -hstep); | |
| const int tr = this_mv.row; | |
| const int tc = this_mv.col; | |
| const int br = best_mv->row; | |
| const int bc = best_mv->col; | |
| int dummy = 0; | |
| if (tr != br && tc != bc) { | |
| assert(diag_step.col == bc - tc); | |
| assert(diag_step.row == br - tr); | |
| const MV chess_mv_1 = { br, bc + diag_step.col }; | |
| const MV chess_mv_2 = { br + diag_step.row, bc }; | |
| check_better_fast(&chess_mv_1, best_mv, mv_limits, src, src_stride, ref, | |
| ref_stride, var_params, mv_cost_params, besterr, sse1, | |
| distortion, &dummy); | |
| check_better_fast(&chess_mv_2, best_mv, mv_limits, src, src_stride, ref, | |
| ref_stride, var_params, mv_cost_params, besterr, sse1, | |
| distortion, &dummy); | |
| } else if (tr == br && tc != bc) { | |
| assert(diag_step.col == bc - tc); | |
| // Continue searching in the best direction | |
| const MV bottom_long_mv = { br + hstep, bc + diag_step.col }; | |
| const MV top_long_mv = { br - hstep, bc + diag_step.col }; | |
| check_better_fast(&bottom_long_mv, best_mv, mv_limits, src, src_stride, ref, | |
| ref_stride, var_params, mv_cost_params, besterr, sse1, | |
| distortion, &dummy); | |
| check_better_fast(&top_long_mv, best_mv, mv_limits, src, src_stride, ref, | |
| ref_stride, var_params, mv_cost_params, besterr, sse1, | |
| distortion, &dummy); | |
| // Search in the direction opposite of the best quadrant | |
| const MV rev_mv = { br - diag_step.row, bc }; | |
| check_better_fast(&rev_mv, best_mv, mv_limits, src, src_stride, ref, | |
| ref_stride, var_params, mv_cost_params, besterr, sse1, | |
| distortion, &dummy); | |
| } else if (tr != br && tc == bc) { | |
| assert(diag_step.row == br - tr); | |
| // Continue searching in the best direction | |
| const MV right_long_mv = { br + diag_step.row, bc + hstep }; | |
| const MV left_long_mv = { br + diag_step.row, bc - hstep }; | |
| check_better_fast(&right_long_mv, best_mv, mv_limits, src, src_stride, ref, | |
| ref_stride, var_params, mv_cost_params, besterr, sse1, | |
| distortion, &dummy); | |
| check_better_fast(&left_long_mv, best_mv, mv_limits, src, src_stride, ref, | |
| ref_stride, var_params, mv_cost_params, besterr, sse1, | |
| distortion, &dummy); | |
| // Search in the direction opposite of the best quadrant | |
| const MV rev_mv = { br, bc - diag_step.col }; | |
| check_better_fast(&rev_mv, best_mv, mv_limits, src, src_stride, ref, | |
| ref_stride, var_params, mv_cost_params, besterr, sse1, | |
| distortion, &dummy); | |
| } | |
| } | |
| // Combines first level check and second level check when applicable. This first | |
| // searches the four cardinal directions, and perform several | |
| // diagonal/chess-pattern searches in the best quadrant. | |
| static AOM_FORCE_INLINE void two_level_checks_fast( | |
| const MV this_mv, MV *best_mv, int hstep, const SubpelMvLimits *mv_limits, | |
| const uint8_t *const src, const int src_stride, const uint8_t *const ref, | |
| int ref_stride, const SUBPEL_SEARCH_VAR_PARAMS *var_params, | |
| const MV_COST_PARAMS *mv_cost_params, unsigned int *besterr, | |
| unsigned int *sse1, int *distortion, int iters) { | |
| const MV diag_step = first_level_check_fast( | |
| this_mv, best_mv, hstep, mv_limits, src, src_stride, ref, ref_stride, | |
| var_params, mv_cost_params, besterr, sse1, distortion); | |
| if (iters > 1) { | |
| second_level_check_fast(this_mv, diag_step, best_mv, hstep, mv_limits, src, | |
| src_stride, ref, ref_stride, var_params, | |
| mv_cost_params, besterr, sse1, distortion); | |
| } | |
| } | |
| static AOM_FORCE_INLINE MV first_level_check( | |
| MACROBLOCKD *xd, const AV1_COMMON *const cm, const MV this_mv, MV *best_mv, | |
| const int hstep, const SubpelMvLimits *mv_limits, const uint8_t *const src, | |
| const int src_stride, const uint8_t *const ref, int ref_stride, | |
| const SUBPEL_SEARCH_VAR_PARAMS *var_params, | |
| const MV_COST_PARAMS *mv_cost_params, unsigned int *besterr, | |
| unsigned int *sse1, int *distortion) { | |
| int dummy = 0; | |
| const MV left_mv = { this_mv.row, this_mv.col - hstep }; | |
| const MV right_mv = { this_mv.row, this_mv.col + hstep }; | |
| const MV top_mv = { this_mv.row - hstep, this_mv.col }; | |
| const MV bottom_mv = { this_mv.row + hstep, this_mv.col }; | |
| const unsigned int left = check_better( | |
| xd, cm, &left_mv, best_mv, mv_limits, src, src_stride, ref, ref_stride, | |
| var_params, mv_cost_params, besterr, sse1, distortion, &dummy); | |
| const unsigned int right = check_better( | |
| xd, cm, &right_mv, best_mv, mv_limits, src, src_stride, ref, ref_stride, | |
| var_params, mv_cost_params, besterr, sse1, distortion, &dummy); | |
| const unsigned int up = check_better( | |
| xd, cm, &top_mv, best_mv, mv_limits, src, src_stride, ref, ref_stride, | |
| var_params, mv_cost_params, besterr, sse1, distortion, &dummy); | |
| const unsigned int down = check_better( | |
| xd, cm, &bottom_mv, best_mv, mv_limits, src, src_stride, ref, ref_stride, | |
| var_params, mv_cost_params, besterr, sse1, distortion, &dummy); | |
| const MV diag_step = get_best_diag_step(hstep, left, right, up, down); | |
| const MV diag_mv = { this_mv.row + diag_step.row, | |
| this_mv.col + diag_step.col }; | |
| // Check the diagonal direction with the best mv | |
| check_better(xd, cm, &diag_mv, best_mv, mv_limits, src, src_stride, ref, | |
| ref_stride, var_params, mv_cost_params, besterr, sse1, | |
| distortion, &dummy); | |
| return diag_step; | |
| } | |
| // A newer version of second level check that gives better quality. | |
| // TODO(chiyotsai@google.com): evaluate this on subpel_search_types different | |
| // from av1_find_best_sub_pixel_tree | |
| static AOM_FORCE_INLINE void second_level_check_v2( | |
| MACROBLOCKD *xd, const AV1_COMMON *const cm, const MV this_mv, MV diag_step, | |
| MV *best_mv, const SubpelMvLimits *mv_limits, const uint8_t *const src, | |
| const int src_stride, const uint8_t *const ref, int ref_stride, | |
| const SUBPEL_SEARCH_VAR_PARAMS *var_params, | |
| const MV_COST_PARAMS *mv_cost_params, unsigned int *besterr, | |
| unsigned int *sse1, int *distortion) { | |
| assert(best_mv->row == this_mv.row + diag_step.row || | |
| best_mv->col == this_mv.col + diag_step.col); | |
| if (CHECK_MV_EQUAL(this_mv, *best_mv)) { | |
| return; | |
| } else if (this_mv.row == best_mv->row) { | |
| // Search away from diagonal step since diagonal search did not provide any | |
| // improvement | |
| diag_step.row *= -1; | |
| } else if (this_mv.col == best_mv->col) { | |
| diag_step.col *= -1; | |
| } | |
| const MV row_bias_mv = { best_mv->row + diag_step.row, best_mv->col }; | |
| const MV col_bias_mv = { best_mv->row, best_mv->col + diag_step.col }; | |
| const MV diag_bias_mv = { best_mv->row + diag_step.row, | |
| best_mv->col + diag_step.col }; | |
| int has_better_mv = 0; | |
| if (var_params->subpel_search_type != USE_2_TAPS_ORIG) { | |
| check_better(xd, cm, &row_bias_mv, best_mv, mv_limits, src, src_stride, ref, | |
| ref_stride, var_params, mv_cost_params, besterr, sse1, | |
| distortion, &has_better_mv); | |
| check_better(xd, cm, &col_bias_mv, best_mv, mv_limits, src, src_stride, ref, | |
| ref_stride, var_params, mv_cost_params, besterr, sse1, | |
| distortion, &has_better_mv); | |
| // Do an additional search if the second iteration gives a better mv | |
| if (has_better_mv) { | |
| check_better(xd, cm, &diag_bias_mv, best_mv, mv_limits, src, src_stride, | |
| ref, ref_stride, var_params, mv_cost_params, besterr, sse1, | |
| distortion, &has_better_mv); | |
| } | |
| } else { | |
| check_better_fast(&row_bias_mv, best_mv, mv_limits, src, src_stride, ref, | |
| ref_stride, var_params, mv_cost_params, besterr, sse1, | |
| distortion, &has_better_mv); | |
| check_better_fast(&col_bias_mv, best_mv, mv_limits, src, src_stride, ref, | |
| ref_stride, var_params, mv_cost_params, besterr, sse1, | |
| distortion, &has_better_mv); | |
| // Do an additional search if the second iteration gives a better mv | |
| if (has_better_mv) { | |
| check_better_fast(&diag_bias_mv, best_mv, mv_limits, src, src_stride, ref, | |
| ref_stride, var_params, mv_cost_params, besterr, sse1, | |
| distortion, &has_better_mv); | |
| } | |
| } | |
| } | |
| // Gets the error at the beginning when the mv has fullpel precision | |
| static unsigned int setup_center_error( | |
| const MACROBLOCKD *xd, const MV *bestmv, const uint8_t *const src, | |
| const int src_stride, const uint8_t *y, int y_stride, | |
| const SUBPEL_SEARCH_VAR_PARAMS *var_params, | |
| const MV_COST_PARAMS *mv_cost_params, unsigned int *sse1, int *distortion) { | |
| const aom_variance_fn_ptr_t *vfp = var_params->vfp; | |
| const uint8_t *second_pred = var_params->second_pred; | |
| const uint8_t *mask = var_params->mask; | |
| const int mask_stride = var_params->mask_stride; | |
| const int invert_mask = var_params->invert_mask; | |
| const int w = var_params->w; | |
| const int h = var_params->h; | |
| unsigned int besterr; | |
| y = pre(y, y_stride, bestmv->row, bestmv->col); | |
| if (second_pred != NULL) { | |
| #if CONFIG_AV1_HIGHBITDEPTH | |
| if (is_cur_buf_hbd(xd)) { | |
| DECLARE_ALIGNED(16, uint16_t, comp_pred16[MAX_SB_SQUARE]); | |
| uint8_t *comp_pred = CONVERT_TO_BYTEPTR(comp_pred16); | |
| if (mask) { | |
| aom_highbd_comp_mask_pred(comp_pred, second_pred, w, h, y, y_stride, | |
| mask, mask_stride, invert_mask); | |
| } else { | |
| aom_highbd_comp_avg_pred(comp_pred, second_pred, w, h, y, y_stride); | |
| } | |
| besterr = vfp->vf(comp_pred, w, src, src_stride, sse1); | |
| } else { | |
| DECLARE_ALIGNED(16, uint8_t, comp_pred[MAX_SB_SQUARE]); | |
| if (mask) { | |
| aom_comp_mask_pred(comp_pred, second_pred, w, h, y, y_stride, mask, | |
| mask_stride, invert_mask); | |
| } else { | |
| aom_comp_avg_pred(comp_pred, second_pred, w, h, y, y_stride); | |
| } | |
| besterr = vfp->vf(comp_pred, w, src, src_stride, sse1); | |
| } | |
| #else | |
| (void)xd; | |
| DECLARE_ALIGNED(16, uint8_t, comp_pred[MAX_SB_SQUARE]); | |
| if (mask) { | |
| aom_comp_mask_pred(comp_pred, second_pred, w, h, y, y_stride, mask, | |
| mask_stride, invert_mask); | |
| } else { | |
| aom_comp_avg_pred(comp_pred, second_pred, w, h, y, y_stride); | |
| } | |
| besterr = vfp->vf(comp_pred, w, src, src_stride, sse1); | |
| #endif | |
| } else { | |
| besterr = vfp->vf(y, y_stride, src, src_stride, sse1); | |
| } | |
| *distortion = besterr; | |
| besterr += mv_err_cost_(bestmv, mv_cost_params); | |
| return besterr; | |
| } | |
| // Gets the error at the beginning when the mv has fullpel precision | |
| static unsigned int upsampled_setup_center_error( | |
| MACROBLOCKD *xd, const AV1_COMMON *const cm, const MV *bestmv, | |
| const uint8_t *const src, const int src_stride, const uint8_t *const y, | |
| int y_stride, const SUBPEL_SEARCH_VAR_PARAMS *var_params, | |
| const MV_COST_PARAMS *mv_cost_params, unsigned int *sse1, int *distortion) { | |
| unsigned int besterr = upsampled_pref_error(xd, cm, bestmv, src, src_stride, | |
| y, y_stride, var_params, sse1); | |
| *distortion = besterr; | |
| besterr += mv_err_cost_(bestmv, mv_cost_params); | |
| return besterr; | |
| } | |
| static INLINE int divide_and_round(int n, int d) { | |
| return ((n < 0) ^ (d < 0)) ? ((n - d / 2) / d) : ((n + d / 2) / d); | |
| } | |
| static INLINE int is_cost_list_wellbehaved(const int *cost_list) { | |
| return cost_list[0] < cost_list[1] && cost_list[0] < cost_list[2] && | |
| cost_list[0] < cost_list[3] && cost_list[0] < cost_list[4]; | |
| } | |
| // Returns surface minima estimate at given precision in 1/2^n bits. | |
| // Assume a model for the cost surface: S = A(x - x0)^2 + B(y - y0)^2 + C | |
| // For a given set of costs S0, S1, S2, S3, S4 at points | |
| // (y, x) = (0, 0), (0, -1), (1, 0), (0, 1) and (-1, 0) respectively, | |
| // the solution for the location of the minima (x0, y0) is given by: | |
| // x0 = 1/2 (S1 - S3)/(S1 + S3 - 2*S0), | |
| // y0 = 1/2 (S4 - S2)/(S4 + S2 - 2*S0). | |
| // The code below is an integerized version of that. | |
| static AOM_INLINE void get_cost_surf_min(const int *cost_list, int *ir, int *ic, | |
| int bits) { | |
| *ic = divide_and_round((cost_list[1] - cost_list[3]) * (1 << (bits - 1)), | |
| (cost_list[1] - 2 * cost_list[0] + cost_list[3])); | |
| *ir = divide_and_round((cost_list[4] - cost_list[2]) * (1 << (bits - 1)), | |
| (cost_list[4] - 2 * cost_list[0] + cost_list[2])); | |
| } | |
| int av1_find_best_sub_pixel_tree_pruned_evenmore( | |
| MACROBLOCK *x, const AV1_COMMON *const cm, | |
| const SUBPEL_MOTION_SEARCH_PARAMS *ms_params, int *distortion, | |
| unsigned int *sse1) { | |
| const int allow_hp = ms_params->allow_hp; | |
| const int forced_stop = ms_params->forced_stop; | |
| const int iters_per_step = ms_params->iters_per_step; | |
| const int *cost_list = ms_params->cost_list; | |
| const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | |
| const SUBPEL_SEARCH_VAR_PARAMS *var_params = &ms_params->var_params; | |
| const uint8_t *const src_address = x->plane[0].src.buf; | |
| const int src_stride = x->plane[0].src.stride; | |
| const MACROBLOCKD *xd = &x->e_mbd; | |
| unsigned int besterr = INT_MAX; | |
| const uint8_t *const ref_address = xd->plane[0].pre[0].buf; | |
| const int ref_stride = xd->plane[0].pre[0].stride; | |
| convert_fullmv_to_mv(&x->best_mv); | |
| MV *bestmv = &x->best_mv.as_mv; | |
| MV start_mv = *bestmv; | |
| int hstep = INIT_SUBPEL_STEP_SIZE; | |
| SubpelMvLimits mv_limits; | |
| av1_set_subpel_mv_search_range(&mv_limits, &x->mv_limits, | |
| mv_cost_params->ref_mv); | |
| (void)cm; | |
| besterr = setup_center_error(xd, bestmv, src_address, src_stride, ref_address, | |
| ref_stride, var_params, mv_cost_params, sse1, | |
| distortion); | |
| if (cost_list && cost_list[0] != INT_MAX && cost_list[1] != INT_MAX && | |
| cost_list[2] != INT_MAX && cost_list[3] != INT_MAX && | |
| cost_list[4] != INT_MAX && is_cost_list_wellbehaved(cost_list)) { | |
| int ir, ic; | |
| int dummy = 0; | |
| get_cost_surf_min(cost_list, &ir, &ic, 2); | |
| if (ir != 0 || ic != 0) { | |
| const MV this_mv = { start_mv.row + 2 * ir, start_mv.col + 2 * ic }; | |
| check_better_fast(&this_mv, bestmv, &mv_limits, src_address, src_stride, | |
| ref_address, ref_stride, var_params, mv_cost_params, | |
| &besterr, sse1, distortion, &dummy); | |
| } | |
| } else { | |
| two_level_checks_fast(start_mv, bestmv, hstep, &mv_limits, src_address, | |
| src_stride, ref_address, ref_stride, var_params, | |
| mv_cost_params, &besterr, sse1, distortion, | |
| iters_per_step); | |
| // Each subsequent iteration checks at least one point in common with | |
| // the last iteration could be 2 ( if diag selected) 1/4 pel | |
| if (forced_stop != HALF_PEL) { | |
| hstep >>= 1; | |
| start_mv = *bestmv; | |
| two_level_checks_fast(start_mv, bestmv, hstep, &mv_limits, src_address, | |
| src_stride, ref_address, ref_stride, var_params, | |
| mv_cost_params, &besterr, sse1, distortion, | |
| iters_per_step); | |
| } | |
| } | |
| if (allow_hp && forced_stop == EIGHTH_PEL) { | |
| hstep >>= 1; | |
| start_mv = *bestmv; | |
| two_level_checks_fast(start_mv, bestmv, hstep, &mv_limits, src_address, | |
| src_stride, ref_address, ref_stride, var_params, | |
| mv_cost_params, &besterr, sse1, distortion, | |
| iters_per_step); | |
| } | |
| return besterr; | |
| } | |
| int av1_find_best_sub_pixel_tree_pruned_more( | |
| MACROBLOCK *x, const AV1_COMMON *const cm, | |
| const SUBPEL_MOTION_SEARCH_PARAMS *ms_params, int *distortion, | |
| unsigned int *sse1) { | |
| const int allow_hp = ms_params->allow_hp; | |
| const int forced_stop = ms_params->forced_stop; | |
| const int iters_per_step = ms_params->iters_per_step; | |
| const int *cost_list = ms_params->cost_list; | |
| const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | |
| const SUBPEL_SEARCH_VAR_PARAMS *var_params = &ms_params->var_params; | |
| const uint8_t *const src_address = x->plane[0].src.buf; | |
| const int src_stride = x->plane[0].src.stride; | |
| const MACROBLOCKD *xd = &x->e_mbd; | |
| unsigned int besterr = INT_MAX; | |
| const uint8_t *const ref_address = xd->plane[0].pre[0].buf; | |
| const int ref_stride = xd->plane[0].pre[0].stride; | |
| convert_fullmv_to_mv(&x->best_mv); | |
| MV *bestmv = &x->best_mv.as_mv; | |
| MV start_mv = *bestmv; | |
| int hstep = INIT_SUBPEL_STEP_SIZE; | |
| SubpelMvLimits mv_limits; | |
| av1_set_subpel_mv_search_range(&mv_limits, &x->mv_limits, | |
| mv_cost_params->ref_mv); | |
| (void)cm; | |
| besterr = setup_center_error(xd, bestmv, src_address, src_stride, ref_address, | |
| ref_stride, var_params, mv_cost_params, sse1, | |
| distortion); | |
| if (cost_list && cost_list[0] != INT_MAX && cost_list[1] != INT_MAX && | |
| cost_list[2] != INT_MAX && cost_list[3] != INT_MAX && | |
| cost_list[4] != INT_MAX && is_cost_list_wellbehaved(cost_list)) { | |
| int ir, ic; | |
| get_cost_surf_min(cost_list, &ir, &ic, 1); | |
| if (ir != 0 || ic != 0) { | |
| const MV this_mv = { start_mv.row + ir * hstep, | |
| start_mv.col + ic * hstep }; | |
| int dummy = 0; | |
| check_better_fast(&this_mv, bestmv, &mv_limits, src_address, src_stride, | |
| ref_address, ref_stride, var_params, mv_cost_params, | |
| &besterr, sse1, distortion, &dummy); | |
| } | |
| } else { | |
| two_level_checks_fast(start_mv, bestmv, hstep, &mv_limits, src_address, | |
| src_stride, ref_address, ref_stride, var_params, | |
| mv_cost_params, &besterr, sse1, distortion, | |
| iters_per_step); | |
| } | |
| // Each subsequent iteration checks at least one point in common with | |
| // the last iteration could be 2 ( if diag selected) 1/4 pel | |
| if (forced_stop != HALF_PEL) { | |
| hstep >>= 1; | |
| start_mv = *bestmv; | |
| two_level_checks_fast(start_mv, bestmv, hstep, &mv_limits, src_address, | |
| src_stride, ref_address, ref_stride, var_params, | |
| mv_cost_params, &besterr, sse1, distortion, | |
| iters_per_step); | |
| } | |
| if (allow_hp && forced_stop == EIGHTH_PEL) { | |
| hstep >>= 1; | |
| start_mv = *bestmv; | |
| two_level_checks_fast(start_mv, bestmv, hstep, &mv_limits, src_address, | |
| src_stride, ref_address, ref_stride, var_params, | |
| mv_cost_params, &besterr, sse1, distortion, | |
| iters_per_step); | |
| } | |
| return besterr; | |
| } | |
| int av1_find_best_sub_pixel_tree_pruned( | |
| MACROBLOCK *x, const AV1_COMMON *const cm, | |
| const SUBPEL_MOTION_SEARCH_PARAMS *ms_params, int *distortion, | |
| unsigned int *sse1) { | |
| const int allow_hp = ms_params->allow_hp; | |
| const int forced_stop = ms_params->forced_stop; | |
| const int iters_per_step = ms_params->iters_per_step; | |
| const int *cost_list = ms_params->cost_list; | |
| const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | |
| const SUBPEL_SEARCH_VAR_PARAMS *var_params = &ms_params->var_params; | |
| const uint8_t *const src_address = x->plane[0].src.buf; | |
| const int src_stride = x->plane[0].src.stride; | |
| const MACROBLOCKD *xd = &x->e_mbd; | |
| unsigned int besterr = INT_MAX; | |
| const uint8_t *const ref_address = xd->plane[0].pre[0].buf; | |
| const int ref_stride = xd->plane[0].pre[0].stride; | |
| convert_fullmv_to_mv(&x->best_mv); | |
| MV *bestmv = &x->best_mv.as_mv; | |
| MV start_mv = *bestmv; | |
| int hstep = INIT_SUBPEL_STEP_SIZE; | |
| SubpelMvLimits mv_limits; | |
| av1_set_subpel_mv_search_range(&mv_limits, &x->mv_limits, | |
| mv_cost_params->ref_mv); | |
| (void)cm; | |
| besterr = setup_center_error(xd, bestmv, src_address, src_stride, ref_address, | |
| ref_stride, var_params, mv_cost_params, sse1, | |
| distortion); | |
| if (cost_list && cost_list[0] != INT_MAX && cost_list[1] != INT_MAX && | |
| cost_list[2] != INT_MAX && cost_list[3] != INT_MAX && | |
| cost_list[4] != INT_MAX) { | |
| const unsigned int whichdir = (cost_list[1] < cost_list[3] ? 0 : 1) + | |
| (cost_list[2] < cost_list[4] ? 0 : 2); | |
| const MV left_mv = { start_mv.row, start_mv.col - hstep }; | |
| const MV right_mv = { start_mv.row, start_mv.col + hstep }; | |
| const MV bottom_mv = { start_mv.row + hstep, start_mv.col }; | |
| const MV top_mv = { start_mv.row - hstep, start_mv.col }; | |
| const MV bottom_left_mv = { start_mv.row + hstep, start_mv.col - hstep }; | |
| const MV bottom_right_mv = { start_mv.row + hstep, start_mv.col + hstep }; | |
| const MV top_left_mv = { start_mv.row - hstep, start_mv.col - hstep }; | |
| const MV top_right_mv = { start_mv.row - hstep, start_mv.col + hstep }; | |
| int dummy = 0; | |
| switch (whichdir) { | |
| case 0: // bottom left quadrant | |
| check_better_fast(&left_mv, bestmv, &mv_limits, src_address, src_stride, | |
| ref_address, ref_stride, var_params, mv_cost_params, | |
| &besterr, sse1, distortion, &dummy); | |
| check_better_fast(&bottom_mv, bestmv, &mv_limits, src_address, | |
| src_stride, ref_address, ref_stride, var_params, | |
| mv_cost_params, &besterr, sse1, distortion, &dummy); | |
| check_better_fast(&bottom_left_mv, bestmv, &mv_limits, src_address, | |
| src_stride, ref_address, ref_stride, var_params, | |
| mv_cost_params, &besterr, sse1, distortion, &dummy); | |
| break; | |
| case 1: // bottom right quadrant | |
| check_better_fast(&right_mv, bestmv, &mv_limits, src_address, | |
| src_stride, ref_address, ref_stride, var_params, | |
| mv_cost_params, &besterr, sse1, distortion, &dummy); | |
| check_better_fast(&bottom_mv, bestmv, &mv_limits, src_address, | |
| src_stride, ref_address, ref_stride, var_params, | |
| mv_cost_params, &besterr, sse1, distortion, &dummy); | |
| check_better_fast(&bottom_right_mv, bestmv, &mv_limits, src_address, | |
| src_stride, ref_address, ref_stride, var_params, | |
| mv_cost_params, &besterr, sse1, distortion, &dummy); | |
| break; | |
| case 2: // top left quadrant | |
| check_better_fast(&left_mv, bestmv, &mv_limits, src_address, src_stride, | |
| ref_address, ref_stride, var_params, mv_cost_params, | |
| &besterr, sse1, distortion, &dummy); | |
| check_better_fast(&top_mv, bestmv, &mv_limits, src_address, src_stride, | |
| ref_address, ref_stride, var_params, mv_cost_params, | |
| &besterr, sse1, distortion, &dummy); | |
| check_better_fast(&top_left_mv, bestmv, &mv_limits, src_address, | |
| src_stride, ref_address, ref_stride, var_params, | |
| mv_cost_params, &besterr, sse1, distortion, &dummy); | |
| break; | |
| case 3: // top right quadrant | |
| check_better_fast(&right_mv, bestmv, &mv_limits, src_address, | |
| src_stride, ref_address, ref_stride, var_params, | |
| mv_cost_params, &besterr, sse1, distortion, &dummy); | |
| check_better_fast(&top_mv, bestmv, &mv_limits, src_address, src_stride, | |
| ref_address, ref_stride, var_params, mv_cost_params, | |
| &besterr, sse1, distortion, &dummy); | |
| check_better_fast(&top_right_mv, bestmv, &mv_limits, src_address, | |
| src_stride, ref_address, ref_stride, var_params, | |
| mv_cost_params, &besterr, sse1, distortion, &dummy); | |
| break; | |
| } | |
| } else { | |
| two_level_checks_fast(start_mv, bestmv, hstep, &mv_limits, src_address, | |
| src_stride, ref_address, ref_stride, var_params, | |
| mv_cost_params, &besterr, sse1, distortion, | |
| iters_per_step); | |
| } | |
| // Each subsequent iteration checks at least one point in common with | |
| // the last iteration could be 2 ( if diag selected) 1/4 pel | |
| if (forced_stop != HALF_PEL) { | |
| hstep >>= 1; | |
| start_mv = *bestmv; | |
| two_level_checks_fast(start_mv, bestmv, hstep, &mv_limits, src_address, | |
| src_stride, ref_address, ref_stride, var_params, | |
| mv_cost_params, &besterr, sse1, distortion, | |
| iters_per_step); | |
| } | |
| if (allow_hp && forced_stop == EIGHTH_PEL) { | |
| hstep >>= 1; | |
| start_mv = *bestmv; | |
| two_level_checks_fast(start_mv, bestmv, hstep, &mv_limits, src_address, | |
| src_stride, ref_address, ref_stride, var_params, | |
| mv_cost_params, &besterr, sse1, distortion, | |
| iters_per_step); | |
| } | |
| return besterr; | |
| } | |
| int av1_find_best_sub_pixel_tree(MACROBLOCK *x, const AV1_COMMON *const cm, | |
| const SUBPEL_MOTION_SEARCH_PARAMS *ms_params, | |
| int *distortion, unsigned int *sse1) { | |
| const int allow_hp = ms_params->allow_hp; | |
| const int forced_stop = ms_params->forced_stop; | |
| const int iters_per_step = ms_params->iters_per_step; | |
| const int do_reset_fractional_mv = ms_params->do_reset_fractional_mv; | |
| const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | |
| const SUBPEL_SEARCH_VAR_PARAMS *var_params = &ms_params->var_params; | |
| const MV *ref_mv = mv_cost_params->ref_mv; | |
| const SUBPEL_SEARCH_TYPE subpel_search_type = | |
| ms_params->var_params.subpel_search_type; | |
| MACROBLOCKD *xd = &x->e_mbd; | |
| const uint8_t *const src_address = x->plane[0].src.buf; | |
| const uint8_t *const ref_address = xd->plane[0].pre[0].buf; | |
| const int src_stride = x->plane[0].src.stride; | |
| const int ref_stride = xd->plane[0].pre[0].stride; | |
| convert_fullmv_to_mv(&x->best_mv); | |
| MV *bestmv = &x->best_mv.as_mv; | |
| SubpelMvLimits mv_limits; | |
| av1_set_subpel_mv_search_range(&mv_limits, &x->mv_limits, ref_mv); | |
| int hstep = INIT_SUBPEL_STEP_SIZE; | |
| int iter, round = FULL_PEL - forced_stop; | |
| unsigned int besterr = INT_MAX; | |
| if (!allow_hp) | |
| if (round == 3) round = 2; | |
| if (subpel_search_type != USE_2_TAPS_ORIG) { | |
| besterr = upsampled_setup_center_error( | |
| xd, cm, bestmv, src_address, src_stride, ref_address, ref_stride, | |
| var_params, mv_cost_params, sse1, distortion); | |
| } else { | |
| besterr = setup_center_error(xd, bestmv, src_address, src_stride, | |
| ref_address, ref_stride, var_params, | |
| mv_cost_params, sse1, distortion); | |
| } | |
| if (do_reset_fractional_mv) { | |
| av1_set_fractional_mv(x->fractional_best_mv); | |
| } | |
| for (iter = 0; iter < round; ++iter) { | |
| MV iter_center_mv = *bestmv; | |
| if (CHECK_MV_EQUAL(x->fractional_best_mv[iter].as_mv, iter_center_mv)) { | |
| return INT_MAX; | |
| } | |
| x->fractional_best_mv[iter].as_mv = iter_center_mv; | |
| MV diag_step; | |
| if (subpel_search_type != USE_2_TAPS_ORIG) { | |
| diag_step = first_level_check(xd, cm, iter_center_mv, bestmv, hstep, | |
| &mv_limits, src_address, src_stride, | |
| ref_address, ref_stride, var_params, | |
| mv_cost_params, &besterr, sse1, distortion); | |
| } else { | |
| diag_step = first_level_check_fast( | |
| iter_center_mv, bestmv, hstep, &mv_limits, src_address, src_stride, | |
| ref_address, ref_stride, var_params, mv_cost_params, &besterr, sse1, | |
| distortion); | |
| } | |
| // Check diagonal sub-pixel position | |
| if (!CHECK_MV_EQUAL(iter_center_mv, *bestmv) && iters_per_step > 1) { | |
| second_level_check_v2(xd, cm, iter_center_mv, diag_step, bestmv, | |
| &mv_limits, src_address, src_stride, ref_address, | |
| ref_stride, var_params, mv_cost_params, &besterr, | |
| sse1, distortion); | |
| } | |
| hstep >>= 1; | |
| } | |
| return besterr; | |
| } | |
| // Note(yunqingwang): The following 2 functions are only used in the motion | |
| // vector unit test, which return extreme motion vectors allowed by the MV | |
| // limits. | |
| // Returns the maximum MV. | |
| int av1_return_max_sub_pixel_mv(MACROBLOCK *x, const AV1_COMMON *const cm, | |
| const SUBPEL_MOTION_SEARCH_PARAMS *ms_params, | |
| int *distortion, unsigned int *sse1) { | |
| (void)cm; | |
| (void)sse1; | |
| (void)distortion; | |
| const int allow_hp = ms_params->allow_hp; | |
| const MV *ref_mv = ms_params->mv_cost_params.ref_mv; | |
| convert_fullmv_to_mv(&x->best_mv); | |
| MV *bestmv = &x->best_mv.as_mv; | |
| SubpelMvLimits mv_limits; | |
| av1_set_subpel_mv_search_range(&mv_limits, &x->mv_limits, ref_mv); | |
| bestmv->row = mv_limits.row_max; | |
| bestmv->col = mv_limits.col_max; | |
| unsigned int besterr = 0; | |
| // In the sub-pel motion search, if hp is not used, then the last bit of mv | |
| // has to be 0. | |
| lower_mv_precision(bestmv, allow_hp, 0); | |
| return besterr; | |
| } | |
| // Returns the minimum MV. | |
| int av1_return_min_sub_pixel_mv(MACROBLOCK *x, const AV1_COMMON *const cm, | |
| const SUBPEL_MOTION_SEARCH_PARAMS *ms_params, | |
| int *distortion, unsigned int *sse1) { | |
| (void)cm; | |
| (void)sse1; | |
| (void)distortion; | |
| const int allow_hp = ms_params->allow_hp; | |
| const MV *ref_mv = ms_params->mv_cost_params.ref_mv; | |
| convert_fullmv_to_mv(&x->best_mv); | |
| MV *bestmv = &x->best_mv.as_mv; | |
| SubpelMvLimits mv_limits; | |
| av1_set_subpel_mv_search_range(&mv_limits, &x->mv_limits, ref_mv); | |
| bestmv->row = mv_limits.row_min; | |
| bestmv->col = mv_limits.col_min; | |
| unsigned int besterr = 0; | |
| // In the sub-pel motion search, if hp is not used, then the last bit of mv | |
| // has to be 0. | |
| lower_mv_precision(bestmv, allow_hp, 0); | |
| return besterr; | |
| } | |
| // Refines MV in a small range | |
| unsigned int av1_refine_warped_mv(const AV1_COMP *cpi, MACROBLOCK *const x, | |
| BLOCK_SIZE bsize, int *pts0, int *pts_inref0, | |
| int total_samples) { | |
| const AV1_COMMON *const cm = &cpi->common; | |
| MACROBLOCKD *xd = &x->e_mbd; | |
| MB_MODE_INFO *mbmi = xd->mi[0]; | |
| const MV neighbors[8] = { { 0, -1 }, { 1, 0 }, { 0, 1 }, { -1, 0 }, | |
| { 0, -2 }, { 2, 0 }, { 0, 2 }, { -2, 0 } }; | |
| const int_mv ref_mv = av1_get_ref_mv(x, 0); | |
| int16_t br = mbmi->mv[0].as_mv.row; | |
| int16_t bc = mbmi->mv[0].as_mv.col; | |
| int16_t *tr = &mbmi->mv[0].as_mv.row; | |
| int16_t *tc = &mbmi->mv[0].as_mv.col; | |
| WarpedMotionParams best_wm_params = mbmi->wm_params; | |
| int best_num_proj_ref = mbmi->num_proj_ref; | |
| unsigned int bestmse; | |
| SubpelMvLimits mv_limits; | |
| const int start = cm->features.allow_high_precision_mv ? 0 : 4; | |
| int ite; | |
| av1_set_subpel_mv_search_range(&mv_limits, &x->mv_limits, &ref_mv.as_mv); | |
| // Calculate the center position's error | |
| assert(av1_is_subpelmv_in_range(&mv_limits, mbmi->mv[0].as_mv)); | |
| bestmse = av1_compute_motion_cost(cpi, x, bsize, &mbmi->mv[0].as_mv); | |
| // MV search | |
| const int mi_row = xd->mi_row; | |
| const int mi_col = xd->mi_col; | |
| for (ite = 0; ite < 2; ++ite) { | |
| int best_idx = -1; | |
| int idx; | |
| for (idx = start; idx < start + 4; ++idx) { | |
| unsigned int thismse; | |
| *tr = br + neighbors[idx].row; | |
| *tc = bc + neighbors[idx].col; | |
| MV this_mv = { *tr, *tc }; | |
| if (av1_is_subpelmv_in_range(&mv_limits, this_mv)) { | |
| int pts[SAMPLES_ARRAY_SIZE], pts_inref[SAMPLES_ARRAY_SIZE]; | |
| memcpy(pts, pts0, total_samples * 2 * sizeof(*pts0)); | |
| memcpy(pts_inref, pts_inref0, total_samples * 2 * sizeof(*pts_inref0)); | |
| if (total_samples > 1) | |
| mbmi->num_proj_ref = | |
| av1_selectSamples(&this_mv, pts, pts_inref, total_samples, bsize); | |
| if (!av1_find_projection(mbmi->num_proj_ref, pts, pts_inref, bsize, *tr, | |
| *tc, &mbmi->wm_params, mi_row, mi_col)) { | |
| thismse = av1_compute_motion_cost(cpi, x, bsize, &this_mv); | |
| if (thismse < bestmse) { | |
| best_idx = idx; | |
| best_wm_params = mbmi->wm_params; | |
| best_num_proj_ref = mbmi->num_proj_ref; | |
| bestmse = thismse; | |
| } | |
| } | |
| } | |
| } | |
| if (best_idx == -1) break; | |
| if (best_idx >= 0) { | |
| br += neighbors[best_idx].row; | |
| bc += neighbors[best_idx].col; | |
| } | |
| } | |
| *tr = br; | |
| *tc = bc; | |
| mbmi->wm_params = best_wm_params; | |
| mbmi->num_proj_ref = best_num_proj_ref; | |
| return bestmse; | |
| } | |
| // ============================================================================= | |
| // Subpixel Motion Search: OBMC | |
| // ============================================================================= | |
| // Estimates the variance of prediction residue | |
| static INLINE int estimate_obmc_pref_error( | |
| const MV *this_mv, const int32_t *src, const int32_t *mask, | |
| const uint8_t *ref, int ref_stride, | |
| const SUBPEL_SEARCH_VAR_PARAMS *var_params, unsigned int *sse) { | |
| const aom_variance_fn_ptr_t *vfp = var_params->vfp; | |
| const int r = this_mv->row; | |
| const int c = this_mv->col; | |
| return vfp->osvf(pre(ref, ref_stride, r, c), ref_stride, sp(c), sp(r), src, | |
| mask, sse); | |
| } | |
| // Calculates the variance of prediction residue | |
| static int upsampled_obmc_pref_error(MACROBLOCKD *xd, const AV1_COMMON *cm, | |
| const MV *this_mv, const int32_t *wsrc, | |
| const int32_t *mask, const uint8_t *ref, | |
| int ref_stride, | |
| const SUBPEL_SEARCH_VAR_PARAMS *var_params, | |
| unsigned int *sse) { | |
| const aom_variance_fn_ptr_t *vfp = var_params->vfp; | |
| const SUBPEL_SEARCH_TYPE subpel_search_type = var_params->subpel_search_type; | |
| const int w = var_params->w; | |
| const int h = var_params->h; | |
| const int mi_row = xd->mi_row; | |
| const int mi_col = xd->mi_col; | |
| const int subpel_x_q3 = sp(this_mv->col); | |
| const int subpel_y_q3 = sp(this_mv->row); | |
| ref = pre(ref, ref_stride, this_mv->row, this_mv->col); | |
| unsigned int besterr; | |
| DECLARE_ALIGNED(16, uint8_t, pred[2 * MAX_SB_SQUARE]); | |
| #if CONFIG_AV1_HIGHBITDEPTH | |
| if (is_cur_buf_hbd(xd)) { | |
| uint8_t *pred8 = CONVERT_TO_BYTEPTR(pred); | |
| aom_highbd_upsampled_pred(xd, cm, mi_row, mi_col, this_mv, pred8, w, h, | |
| subpel_x_q3, subpel_y_q3, ref, ref_stride, xd->bd, | |
| subpel_search_type); | |
| besterr = vfp->ovf(pred8, w, wsrc, mask, sse); | |
| } else { | |
| aom_upsampled_pred(xd, cm, mi_row, mi_col, this_mv, pred, w, h, subpel_x_q3, | |
| subpel_y_q3, ref, ref_stride, subpel_search_type); | |
| besterr = vfp->ovf(pred, w, wsrc, mask, sse); | |
| } | |
| #else | |
| aom_upsampled_pred(xd, cm, mi_row, mi_col, this_mv, pred, w, h, subpel_x_q3, | |
| subpel_y_q3, ref, ref_stride, subpel_search_type); | |
| besterr = vfp->ovf(pred, w, wsrc, mask, sse); | |
| #endif | |
| return besterr; | |
| } | |
| static unsigned int setup_obmc_center_error( | |
| const MV *this_mv, const int32_t *const wsrc, const int32_t *mask, | |
| const uint8_t *ref, int ref_stride, | |
| const SUBPEL_SEARCH_VAR_PARAMS *var_params, | |
| const MV_COST_PARAMS *mv_cost_params, unsigned int *sse1, int *distortion) { | |
| // TODO(chiyotsai@google.com): There might be a bug here where we didn't move | |
| // use y + pre(y, r, c). | |
| unsigned int besterr = | |
| var_params->vfp->ovf(ref, ref_stride, wsrc, mask, sse1); | |
| *distortion = besterr; | |
| besterr += mv_err_cost_(this_mv, mv_cost_params); | |
| return besterr; | |
| } | |
| static unsigned int upsampled_setup_obmc_center_error( | |
| MACROBLOCKD *xd, const AV1_COMMON *const cm, const MV *this_mv, | |
| const int32_t *const wsrc, const int32_t *mask, const uint8_t *const ref, | |
| int ref_stride, const SUBPEL_SEARCH_VAR_PARAMS *var_params, | |
| const MV_COST_PARAMS *mv_cost_params, unsigned int *sse1, int *distortion) { | |
| unsigned int besterr = upsampled_obmc_pref_error( | |
| xd, cm, this_mv, wsrc, mask, ref, ref_stride, var_params, sse1); | |
| *distortion = besterr; | |
| besterr += mv_err_cost_(this_mv, mv_cost_params); | |
| return besterr; | |
| } | |
| // Estimates the variance of prediction residue | |
| // TODO(chiyotsai@google.com): the cost does does not match the cost in | |
| // mv_cost_. Investigate this later. | |
| static INLINE int estimate_obmc_mvcost(const MV *this_mv, | |
| const MV_COST_PARAMS *mv_cost_params) { | |
| const MV *ref_mv = mv_cost_params->ref_mv; | |
| const int *mvjcost = mv_cost_params->mvjcost; | |
| const int *const *mvcost = mv_cost_params->mvcost; | |
| const int error_per_bit = mv_cost_params->error_per_bit; | |
| const MV_COST_TYPE mv_cost_type = mv_cost_params->mv_cost_type; | |
| const MV diff_mv = { GET_MV_SUBPEL(this_mv->row - ref_mv->row), | |
| GET_MV_SUBPEL(this_mv->col - ref_mv->col) }; | |
| switch (mv_cost_type) { | |
| case MV_COST_ENTROPY: | |
| return (unsigned)((mv_cost(&diff_mv, mvjcost, | |
| CONVERT_TO_CONST_MVCOST(mvcost)) * | |
| error_per_bit + | |
| 4096) >> | |
| 13); | |
| case MV_COST_NONE: return 0; | |
| default: | |
| assert(0 && "L1 norm is not tuned for estimated obmc mvcost"); | |
| return 0; | |
| } | |
| } | |
| // Estimates whether this_mv is better than best_mv. This function incorporates | |
| // both prediction error and residue into account. | |
| static INLINE unsigned int obmc_check_better_fast( | |
| const MV *this_mv, MV *best_mv, const SubpelMvLimits *mv_limits, | |
| const int32_t *src, const int32_t *mask, const uint8_t *const ref, | |
| int ref_stride, const SUBPEL_SEARCH_VAR_PARAMS *var_params, | |
| const MV_COST_PARAMS *mv_cost_params, unsigned int *besterr, | |
| unsigned int *sse1, int *distortion, int *has_better_mv) { | |
| unsigned int cost; | |
| if (av1_is_subpelmv_in_range(mv_limits, *this_mv)) { | |
| unsigned int sse; | |
| const int thismse = estimate_obmc_pref_error(this_mv, src, mask, ref, | |
| ref_stride, var_params, &sse); | |
| cost = estimate_obmc_mvcost(this_mv, mv_cost_params); | |
| cost += thismse; | |
| if (cost < *besterr) { | |
| *besterr = cost; | |
| *best_mv = *this_mv; | |
| *distortion = thismse; | |
| *sse1 = sse; | |
| *has_better_mv |= 1; | |
| } | |
| } else { | |
| cost = INT_MAX; | |
| } | |
| return cost; | |
| } | |
| // Estimates whether this_mv is better than best_mv. This function incorporates | |
| // both prediction error and residue into account. | |
| static INLINE unsigned int obmc_check_better( | |
| MACROBLOCKD *xd, const AV1_COMMON *cm, const MV *this_mv, MV *best_mv, | |
| const SubpelMvLimits *mv_limits, const int32_t *src, const int32_t *mask, | |
| const uint8_t *const ref, int ref_stride, | |
| const SUBPEL_SEARCH_VAR_PARAMS *var_params, | |
| const MV_COST_PARAMS *mv_cost_params, unsigned int *besterr, | |
| unsigned int *sse1, int *distortion, int *has_better_mv) { | |
| unsigned int cost; | |
| if (av1_is_subpelmv_in_range(mv_limits, *this_mv)) { | |
| unsigned int sse; | |
| const int thismse = upsampled_obmc_pref_error( | |
| xd, cm, this_mv, src, mask, ref, ref_stride, var_params, &sse); | |
| cost = mv_err_cost_(this_mv, mv_cost_params); | |
| cost += thismse; | |
| if (cost < *besterr) { | |
| *besterr = cost; | |
| *best_mv = *this_mv; | |
| *distortion = thismse; | |
| *sse1 = sse; | |
| *has_better_mv |= 1; | |
| } | |
| } else { | |
| cost = INT_MAX; | |
| } | |
| return cost; | |
| } | |
| static AOM_FORCE_INLINE MV obmc_first_level_check( | |
| MACROBLOCKD *xd, const AV1_COMMON *const cm, const MV this_mv, MV *best_mv, | |
| const int hstep, const SubpelMvLimits *mv_limits, const int32_t *const src, | |
| const int32_t *const mask, const uint8_t *const ref, int ref_stride, | |
| const SUBPEL_SEARCH_VAR_PARAMS *var_params, | |
| const MV_COST_PARAMS *mv_cost_params, unsigned int *besterr, | |
| unsigned int *sse1, int *distortion) { | |
| int dummy = 0; | |
| const MV left_mv = { this_mv.row, this_mv.col - hstep }; | |
| const MV right_mv = { this_mv.row, this_mv.col + hstep }; | |
| const MV top_mv = { this_mv.row - hstep, this_mv.col }; | |
| const MV bottom_mv = { this_mv.row + hstep, this_mv.col }; | |
| if (var_params->subpel_search_type != USE_2_TAPS_ORIG) { | |
| const unsigned int left = obmc_check_better( | |
| xd, cm, &left_mv, best_mv, mv_limits, src, mask, ref, ref_stride, | |
| var_params, mv_cost_params, besterr, sse1, distortion, &dummy); | |
| const unsigned int right = obmc_check_better( | |
| xd, cm, &right_mv, best_mv, mv_limits, src, mask, ref, ref_stride, | |
| var_params, mv_cost_params, besterr, sse1, distortion, &dummy); | |
| const unsigned int up = obmc_check_better( | |
| xd, cm, &top_mv, best_mv, mv_limits, src, mask, ref, ref_stride, | |
| var_params, mv_cost_params, besterr, sse1, distortion, &dummy); | |
| const unsigned int down = obmc_check_better( | |
| xd, cm, &bottom_mv, best_mv, mv_limits, src, mask, ref, ref_stride, | |
| var_params, mv_cost_params, besterr, sse1, distortion, &dummy); | |
| const MV diag_step = get_best_diag_step(hstep, left, right, up, down); | |
| const MV diag_mv = { this_mv.row + diag_step.row, | |
| this_mv.col + diag_step.col }; | |
| // Check the diagonal direction with the best mv | |
| obmc_check_better(xd, cm, &diag_mv, best_mv, mv_limits, src, mask, ref, | |
| ref_stride, var_params, mv_cost_params, besterr, sse1, | |
| distortion, &dummy); | |
| return diag_step; | |
| } else { | |
| const unsigned int left = obmc_check_better_fast( | |
| &left_mv, best_mv, mv_limits, src, mask, ref, ref_stride, var_params, | |
| mv_cost_params, besterr, sse1, distortion, &dummy); | |
| const unsigned int right = obmc_check_better_fast( | |
| &right_mv, best_mv, mv_limits, src, mask, ref, ref_stride, var_params, | |
| mv_cost_params, besterr, sse1, distortion, &dummy); | |
| const unsigned int up = obmc_check_better_fast( | |
| &top_mv, best_mv, mv_limits, src, mask, ref, ref_stride, var_params, | |
| mv_cost_params, besterr, sse1, distortion, &dummy); | |
| const unsigned int down = obmc_check_better_fast( | |
| &bottom_mv, best_mv, mv_limits, src, mask, ref, ref_stride, var_params, | |
| mv_cost_params, besterr, sse1, distortion, &dummy); | |
| const MV diag_step = get_best_diag_step(hstep, left, right, up, down); | |
| const MV diag_mv = { this_mv.row + diag_step.row, | |
| this_mv.col + diag_step.col }; | |
| // Check the diagonal direction with the best mv | |
| obmc_check_better_fast(&diag_mv, best_mv, mv_limits, src, mask, ref, | |
| ref_stride, var_params, mv_cost_params, besterr, | |
| sse1, distortion, &dummy); | |
| return diag_step; | |
| } | |
| } | |
| // A newer version of second level check for obmc that gives better quality. | |
| static AOM_FORCE_INLINE void obmc_second_level_check_v2( | |
| MACROBLOCKD *xd, const AV1_COMMON *const cm, const MV this_mv, MV diag_step, | |
| MV *best_mv, const SubpelMvLimits *mv_limits, const int32_t *src, | |
| const int32_t *mask, const uint8_t *const ref, int ref_stride, | |
| const SUBPEL_SEARCH_VAR_PARAMS *var_params, | |
| const MV_COST_PARAMS *mv_cost_params, unsigned int *besterr, | |
| unsigned int *sse1, int *distortion) { | |
| assert(best_mv->row == this_mv.row + diag_step.row || | |
| best_mv->col == this_mv.col + diag_step.col); | |
| if (CHECK_MV_EQUAL(this_mv, *best_mv)) { | |
| return; | |
| } else if (this_mv.row == best_mv->row) { | |
| // Search away from diagonal step since diagonal search did not provide any | |
| // improvement | |
| diag_step.row *= -1; | |
| } else if (this_mv.col == best_mv->col) { | |
| diag_step.col *= -1; | |
| } | |
| const MV row_bias_mv = { best_mv->row + diag_step.row, best_mv->col }; | |
| const MV col_bias_mv = { best_mv->row, best_mv->col + diag_step.col }; | |
| const MV diag_bias_mv = { best_mv->row + diag_step.row, | |
| best_mv->col + diag_step.col }; | |
| int has_better_mv = 0; | |
| if (var_params->subpel_search_type != USE_2_TAPS_ORIG) { | |
| obmc_check_better(xd, cm, &row_bias_mv, best_mv, mv_limits, src, mask, ref, | |
| ref_stride, var_params, mv_cost_params, besterr, sse1, | |
| distortion, &has_better_mv); | |
| obmc_check_better(xd, cm, &col_bias_mv, best_mv, mv_limits, src, mask, ref, | |
| ref_stride, var_params, mv_cost_params, besterr, sse1, | |
| distortion, &has_better_mv); | |
| // Do an additional search if the second iteration gives a better mv | |
| if (has_better_mv) { | |
| obmc_check_better(xd, cm, &diag_bias_mv, best_mv, mv_limits, src, mask, | |
| ref, ref_stride, var_params, mv_cost_params, besterr, | |
| sse1, distortion, &has_better_mv); | |
| } | |
| } else { | |
| obmc_check_better_fast(&row_bias_mv, best_mv, mv_limits, src, mask, ref, | |
| ref_stride, var_params, mv_cost_params, besterr, | |
| sse1, distortion, &has_better_mv); | |
| obmc_check_better_fast(&col_bias_mv, best_mv, mv_limits, src, mask, ref, | |
| ref_stride, var_params, mv_cost_params, besterr, | |
| sse1, distortion, &has_better_mv); | |
| // Do an additional search if the second iteration gives a better mv | |
| if (has_better_mv) { | |
| obmc_check_better_fast(&diag_bias_mv, best_mv, mv_limits, src, mask, ref, | |
| ref_stride, var_params, mv_cost_params, besterr, | |
| sse1, distortion, &has_better_mv); | |
| } | |
| } | |
| } | |
| int av1_find_best_obmc_sub_pixel_tree_up( | |
| MACROBLOCK *x, const AV1_COMMON *const cm, | |
| const SUBPEL_MOTION_SEARCH_PARAMS *ms_params, int *distortion, | |
| unsigned int *sse1) { | |
| const int allow_hp = ms_params->allow_hp; | |
| const int iters_per_step = ms_params->iters_per_step; | |
| const SUBPEL_FORCE_STOP forced_stop = ms_params->forced_stop; | |
| const MV_COST_PARAMS *mv_cost_params = &ms_params->mv_cost_params; | |
| const SUBPEL_SEARCH_VAR_PARAMS *var_params = &ms_params->var_params; | |
| const MV *ref_mv = mv_cost_params->ref_mv; | |
| const SUBPEL_SEARCH_TYPE subpel_search_type = | |
| ms_params->var_params.subpel_search_type; | |
| const int32_t *wsrc = x->wsrc_buf; | |
| const int32_t *mask = x->mask_buf; | |
| MACROBLOCKD *xd = &x->e_mbd; | |
| struct macroblockd_plane *const pd = &xd->plane[0]; | |
| const int32_t *const src_address = wsrc; | |
| const int ref_stride = pd->pre[0].stride; | |
| const uint8_t *ref_address = pd->pre[0].buf; | |
| convert_fullmv_to_mv(&x->best_mv); | |
| MV *bestmv = &x->best_mv.as_mv; | |
| SubpelMvLimits mv_limits; | |
| av1_set_subpel_mv_search_range(&mv_limits, &x->mv_limits, ref_mv); | |
| int hstep = INIT_SUBPEL_STEP_SIZE; | |
| int round = FULL_PEL - forced_stop; | |
| if (!allow_hp) | |
| if (round == 3) round = 2; | |
| unsigned int besterr = INT_MAX; | |
| if (subpel_search_type != USE_2_TAPS_ORIG) | |
| besterr = upsampled_setup_obmc_center_error( | |
| xd, cm, bestmv, src_address, mask, ref_address, ref_stride, var_params, | |
| mv_cost_params, sse1, distortion); | |
| else | |
| besterr = setup_obmc_center_error(bestmv, src_address, mask, ref_address, | |
| ref_stride, var_params, mv_cost_params, | |
| sse1, distortion); | |
| for (int iter = 0; iter < round; ++iter) { | |
| MV iter_center_mv = *bestmv; | |
| MV diag_step = obmc_first_level_check( | |
| xd, cm, iter_center_mv, bestmv, hstep, &mv_limits, src_address, mask, | |
| ref_address, ref_stride, var_params, mv_cost_params, &besterr, sse1, | |
| distortion); | |
| if (!CHECK_MV_EQUAL(iter_center_mv, *bestmv) && iters_per_step > 1) { | |
| obmc_second_level_check_v2(xd, cm, iter_center_mv, diag_step, bestmv, | |
| &mv_limits, src_address, mask, ref_address, | |
| ref_stride, var_params, mv_cost_params, | |
| &besterr, sse1, distortion); | |
| } | |
| hstep >>= 1; | |
| } | |
| return besterr; | |
| } | |
| // ============================================================================= | |
| // Public cost function: mv_cost + pred error | |
| // ============================================================================= | |
| int av1_get_mvpred_sse(const MACROBLOCK *x, const FULLPEL_MV *best_mv, | |
| const MV *ref_mv, const aom_variance_fn_ptr_t *vfp) { | |
| const MACROBLOCKD *const xd = &x->e_mbd; | |
| const struct buf_2d *const what = &x->plane[0].src; | |
| const struct buf_2d *const in_what = &xd->plane[0].pre[0]; | |
| const MV mv = get_mv_from_fullmv(best_mv); | |
| const MV_COST_TYPE mv_cost_type = x->mv_cost_type; | |
| unsigned int sse, var; | |
| var = vfp->vf(what->buf, what->stride, get_buf_from_mv(in_what, best_mv), | |
| in_what->stride, &sse); | |
| (void)var; | |
| return sse + mv_err_cost(&mv, ref_mv, x->nmv_vec_cost, | |
| CONVERT_TO_CONST_MVCOST(x->mv_cost_stack), | |
| x->errorperbit, mv_cost_type); | |
| } | |
| int av1_get_mvpred_var(const MACROBLOCK *x, const FULLPEL_MV *best_mv, | |
| const MV *ref_mv, const aom_variance_fn_ptr_t *vfp) { | |
| const MACROBLOCKD *const xd = &x->e_mbd; | |
| const struct buf_2d *const what = &x->plane[0].src; | |
| const struct buf_2d *const in_what = &xd->plane[0].pre[0]; | |
| const MV mv = get_mv_from_fullmv(best_mv); | |
| const MV_COST_TYPE mv_cost_type = x->mv_cost_type; | |
| unsigned int sse, var; | |
| var = vfp->vf(what->buf, what->stride, get_buf_from_mv(in_what, best_mv), | |
| in_what->stride, &sse); | |
| return var + mv_err_cost(&mv, ref_mv, x->nmv_vec_cost, | |
| CONVERT_TO_CONST_MVCOST(x->mv_cost_stack), | |
| x->errorperbit, mv_cost_type); | |
| } | |
| int av1_get_mvpred_av_var(const MACROBLOCK *x, const FULLPEL_MV *best_mv, | |
| const MV *ref_mv, const uint8_t *second_pred, | |
| const aom_variance_fn_ptr_t *vfp, | |
| const struct buf_2d *src, const struct buf_2d *pre) { | |
| const struct buf_2d *const what = src; | |
| const struct buf_2d *const in_what = pre; | |
| const MV mv = get_mv_from_fullmv(best_mv); | |
| const MV_COST_TYPE mv_cost_type = x->mv_cost_type; | |
| unsigned int unused; | |
| return vfp->svaf(get_buf_from_mv(in_what, best_mv), in_what->stride, 0, 0, | |
| what->buf, what->stride, &unused, second_pred) + | |
| mv_err_cost(&mv, ref_mv, x->nmv_vec_cost, | |
| CONVERT_TO_CONST_MVCOST(x->mv_cost_stack), x->errorperbit, | |
| mv_cost_type); | |
| } | |
| int av1_get_mvpred_mask_var(const MACROBLOCK *x, const FULLPEL_MV *best_mv, | |
| const MV *ref_mv, const uint8_t *second_pred, | |
| const uint8_t *mask, int mask_stride, | |
| int invert_mask, const aom_variance_fn_ptr_t *vfp, | |
| const struct buf_2d *src, | |
| const struct buf_2d *pre) { | |
| const struct buf_2d *const what = src; | |
| const struct buf_2d *const in_what = pre; | |
| const MV mv = get_mv_from_fullmv(best_mv); | |
| const MV_COST_TYPE mv_cost_type = x->mv_cost_type; | |
| unsigned int unused; | |
| return vfp->msvf(what->buf, what->stride, 0, 0, | |
| get_buf_from_mv(in_what, best_mv), in_what->stride, | |
| second_pred, mask, mask_stride, invert_mask, &unused) + | |
| mv_err_cost(&mv, ref_mv, x->nmv_vec_cost, | |
| CONVERT_TO_CONST_MVCOST(x->mv_cost_stack), x->errorperbit, | |
| mv_cost_type); | |
| } | |
| unsigned int av1_compute_motion_cost(const AV1_COMP *cpi, MACROBLOCK *const x, | |
| BLOCK_SIZE bsize, const MV *this_mv) { | |
| const AV1_COMMON *const cm = &cpi->common; | |
| MACROBLOCKD *xd = &x->e_mbd; | |
| const uint8_t *const src = x->plane[0].src.buf; | |
| const int src_stride = x->plane[0].src.stride; | |
| uint8_t *const dst = xd->plane[0].dst.buf; | |
| const int dst_stride = xd->plane[0].dst.stride; | |
| const aom_variance_fn_ptr_t *vfp = &cpi->fn_ptr[bsize]; | |
| const int_mv ref_mv = av1_get_ref_mv(x, 0); | |
| unsigned int mse; | |
| unsigned int sse; | |
| const int mi_row = xd->mi_row; | |
| const int mi_col = xd->mi_col; | |
| const MV_COST_TYPE mv_cost_type = x->mv_cost_type; | |
| av1_enc_build_inter_predictor(cm, xd, mi_row, mi_col, NULL, bsize, | |
| AOM_PLANE_Y, AOM_PLANE_Y); | |
| mse = vfp->vf(dst, dst_stride, src, src_stride, &sse); | |
| mse += mv_err_cost(this_mv, &ref_mv.as_mv, x->nmv_vec_cost, | |
| CONVERT_TO_CONST_MVCOST(x->mv_cost_stack), x->errorperbit, | |
| mv_cost_type); | |
| return mse; | |
| } |