| /* |
| * Copyright (c) 2016, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 2 Clause License and |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License |
| * was not distributed with this source code in the LICENSE file, you can |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open |
| * Media Patent License 1.0 was not distributed with this source code in the |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. |
| */ |
| |
| #ifndef AOM_AV1_ENCODER_RATECTRL_H_ |
| #define AOM_AV1_ENCODER_RATECTRL_H_ |
| |
| #include "aom/aom_codec.h" |
| #include "aom/aom_integer.h" |
| |
| #include "aom_ports/mem.h" |
| |
| #include "av1/common/av1_common_int.h" |
| #include "av1/common/blockd.h" |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /*!\cond */ |
| |
| // Bits Per MB at different Q (Multiplied by 512) |
| #define BPER_MB_NORMBITS 9 |
| |
| // Use this macro to turn on/off use of alt-refs in one-pass mode. |
| #define USE_ALTREF_FOR_ONE_PASS 1 |
| |
| // Threshold used to define if a KF group is static (e.g. a slide show). |
| // Essentially, this means that no frame in the group has more than 1% of MBs |
| // that are not marked as coded with 0,0 motion in the first pass. |
| #define STATIC_KF_GROUP_THRESH 99 |
| #define STATIC_KF_GROUP_FLOAT_THRESH 0.99 |
| |
| // The maximum duration of a GF group that is static (e.g. a slide show). |
| #define MAX_STATIC_GF_GROUP_LENGTH 250 |
| |
| #define MIN_GF_INTERVAL 4 |
| #define MAX_GF_INTERVAL 32 |
| #define FIXED_GF_INTERVAL 16 |
| #define MAX_GF_LENGTH_LAP 16 |
| |
| #define FIXED_GF_INTERVAL_RT 80 |
| #define MAX_GF_INTERVAL_RT 160 |
| |
| #define MAX_NUM_GF_INTERVALS 15 |
| |
| #define MAX_ARF_LAYERS 6 |
| // #define STRICT_RC |
| |
| #define DEFAULT_KF_BOOST_RT 2300 |
| #define DEFAULT_GF_BOOST_RT 2000 |
| |
| // A passive rate control strategy for screen content type in real-time mode. |
| // When it is turned on, the compression performance is improved by |
| // 7.8% (overall_psnr), 5.0% (VMAF) on average. Some clips see gains |
| // over 20% on metric. |
| // The downside is that it does not guarantee frame size. |
| // Since RT mode has a tight restriction on buffer overflow control, we |
| // turn it off by default. |
| #define RT_PASSIVE_STRATEGY 0 |
| #define MAX_Q_HISTORY 1000 |
| |
| typedef struct { |
| int resize_width; |
| int resize_height; |
| uint8_t superres_denom; |
| } size_params_type; |
| |
| enum { |
| INTER_NORMAL, |
| GF_ARF_LOW, |
| GF_ARF_STD, |
| KF_STD, |
| RATE_FACTOR_LEVELS |
| } UENUM1BYTE(RATE_FACTOR_LEVEL); |
| |
| enum { |
| KF_UPDATE, |
| LF_UPDATE, |
| GF_UPDATE, |
| ARF_UPDATE, |
| OVERLAY_UPDATE, |
| INTNL_OVERLAY_UPDATE, // Internal Overlay Frame |
| INTNL_ARF_UPDATE, // Internal Altref Frame |
| FRAME_UPDATE_TYPES |
| } UENUM1BYTE(FRAME_UPDATE_TYPE); |
| |
| enum { |
| REFBUF_RESET, // Clear reference frame buffer |
| REFBUF_UPDATE, // Refresh reference frame buffer |
| REFBUF_STATES |
| } UENUM1BYTE(REFBUF_STATE); |
| |
| typedef enum { |
| NO_RESIZE = 0, |
| DOWN_THREEFOUR = 1, // From orig to 3/4. |
| DOWN_ONEHALF = 2, // From orig or 3/4 to 1/2. |
| UP_THREEFOUR = -1, // From 1/2 to 3/4. |
| UP_ORIG = -2, // From 1/2 or 3/4 to orig. |
| } RESIZE_ACTION; |
| |
| typedef enum { ORIG = 0, THREE_QUARTER = 1, ONE_HALF = 2 } RESIZE_STATE; |
| |
| #define MAX_FIRSTPASS_ANALYSIS_FRAMES 150 |
| typedef enum region_types { |
| STABLE_REGION = 0, |
| HIGH_VAR_REGION = 1, |
| SCENECUT_REGION = 2, |
| BLENDING_REGION = 3, |
| } REGION_TYPES; |
| |
| typedef struct regions { |
| int start; |
| int last; |
| double avg_noise_var; |
| double avg_cor_coeff; |
| double avg_sr_fr_ratio; |
| double avg_intra_err; |
| double avg_coded_err; |
| REGION_TYPES type; |
| } REGIONS; |
| |
| /*!\endcond */ |
| /*! |
| * \brief Rate Control parameters and status |
| */ |
| typedef struct { |
| // Rate targetting variables |
| |
| /*! |
| * Baseline target rate for frame before adjustment for previous under or |
| * over shoot. |
| */ |
| int base_frame_target; |
| /*! |
| * Target rate for frame after adjustment for previous under or over shoot. |
| */ |
| int this_frame_target; // Actual frame target after rc adjustment. |
| |
| /*! |
| * Projected size for current frame |
| */ |
| int projected_frame_size; |
| |
| /*! |
| * Bit size of transform coefficient for current frame. |
| */ |
| int coefficient_size; |
| |
| /*! |
| * Super block rate target used with some adaptive quantization strategies. |
| */ |
| int sb64_target_rate; |
| |
| /*! |
| * Number of frames since the last ARF / GF. |
| */ |
| int frames_since_golden; |
| |
| /*! |
| * Number of frames till the next ARF / GF is due. |
| */ |
| int frames_till_gf_update_due; |
| |
| /*! |
| * Number of determined gf groups left |
| */ |
| int intervals_till_gf_calculate_due; |
| |
| /*!\cond */ |
| int min_gf_interval; |
| int max_gf_interval; |
| int static_scene_max_gf_interval; |
| /*!\endcond */ |
| /*! |
| * Frames before the next key frame |
| */ |
| int frames_to_key; |
| /*!\cond */ |
| int frames_since_key; |
| int frames_to_fwd_kf; |
| int is_src_frame_alt_ref; |
| int sframe_due; |
| |
| int high_source_sad; |
| uint64_t avg_source_sad; |
| uint64_t prev_avg_source_sad; |
| uint64_t frame_source_sad; |
| |
| int avg_frame_bandwidth; // Average frame size target for clip |
| int min_frame_bandwidth; // Minimum allocation used for any frame |
| int max_frame_bandwidth; // Maximum burst rate allowed for a frame. |
| int prev_avg_frame_bandwidth; |
| |
| int ni_av_qi; |
| int ni_tot_qi; |
| |
| int decimation_factor; |
| int decimation_count; |
| |
| /*!\endcond */ |
| /*! |
| * User specified maximum Q allowed for current frame |
| */ |
| int worst_quality; |
| /*! |
| * User specified minimum Q allowed for current frame |
| */ |
| int best_quality; |
| |
| /*!\cond */ |
| |
| // rate control history for last frame(1) and the frame before(2). |
| // -1: overshoot |
| // 1: undershoot |
| // 0: not initialized. |
| int rc_1_frame; |
| int rc_2_frame; |
| int q_1_frame; |
| int q_2_frame; |
| |
| /*!\endcond */ |
| /*! |
| * Proposed maximum allowed Q for current frame |
| */ |
| int active_worst_quality; |
| |
| /*!\cond */ |
| // Track amount of low motion in scene |
| int avg_frame_low_motion; |
| int cnt_zeromv; |
| |
| // signals if number of blocks with motion is high |
| int percent_blocks_with_motion; |
| |
| // Maximum value of source sad across all blocks of frame. |
| uint64_t max_block_source_sad; |
| |
| // For dynamic resize, 1 pass cbr. |
| RESIZE_STATE resize_state; |
| int resize_avg_qp; |
| int resize_buffer_underflow; |
| int resize_count; |
| |
| // Flag to disable content related qp adjustment. |
| int rtc_external_ratectrl; |
| |
| // Stores fast_extra_bits of the current frame. |
| int frame_level_fast_extra_bits; |
| |
| double frame_level_rate_correction_factors[RATE_FACTOR_LEVELS]; |
| |
| int frame_num_last_gf_refresh; |
| |
| int prev_coded_width; |
| int prev_coded_height; |
| |
| // The ratio used for inter frames in bit estimation. |
| // TODO(yunqing): if golden frame is treated differently (e.g. gf_cbr_boost_ |
| // pct > THR), consider to add bit_est_ratio_g for golden frames. |
| int bit_est_ratio; |
| |
| // Whether to use a fixed qp for the frame, bypassing internal rate control. |
| // This flag will reset to 0 after every frame. |
| int use_external_qp_one_pass; |
| /*!\endcond */ |
| } RATE_CONTROL; |
| |
| /*! |
| * \brief Primary Rate Control parameters and status |
| */ |
| typedef struct { |
| // Sub-gop level Rate targetting variables |
| |
| /*! |
| * Target bit budget for the current GF / ARF group of frame. |
| */ |
| int64_t gf_group_bits; |
| |
| /*! |
| * Boost factor used to calculate the extra bits allocated to the key frame |
| */ |
| int kf_boost; |
| |
| /*! |
| * Boost factor used to calculate the extra bits allocated to ARFs and GFs |
| */ |
| int gfu_boost; |
| |
| /*! |
| * Stores the determined gf group lengths for a set of gf groups |
| */ |
| int gf_intervals[MAX_NUM_GF_INTERVALS]; |
| |
| /*! |
| * The current group's index into gf_intervals[] |
| */ |
| int cur_gf_index; |
| |
| /*!\cond */ |
| int num_regions; |
| |
| REGIONS regions[MAX_FIRSTPASS_ANALYSIS_FRAMES]; |
| int regions_offset; // offset of regions from the last keyframe |
| int frames_till_regions_update; |
| |
| int baseline_gf_interval; |
| |
| int constrained_gf_group; |
| |
| int this_key_frame_forced; |
| |
| int next_key_frame_forced; |
| /*!\endcond */ |
| |
| /*! |
| * Initial buffuer level in ms for CBR / low delay encoding |
| */ |
| int64_t starting_buffer_level; |
| |
| /*! |
| * Optimum / target buffuer level in ms for CBR / low delay encoding |
| */ |
| int64_t optimal_buffer_level; |
| |
| /*! |
| * Maximum target buffuer level in ms for CBR / low delay encoding |
| */ |
| int64_t maximum_buffer_size; |
| |
| /*! |
| * Q index used for ALT frame |
| */ |
| int arf_q; |
| |
| /*!\cond */ |
| float_t arf_boost_factor; |
| |
| int base_layer_qp; |
| |
| // Total number of stats used only for kf_boost calculation. |
| int num_stats_used_for_kf_boost; |
| |
| // Total number of stats used only for gfu_boost calculation. |
| int num_stats_used_for_gfu_boost; |
| |
| // Total number of stats required by gfu_boost calculation. |
| int num_stats_required_for_gfu_boost; |
| |
| int enable_scenecut_detection; |
| |
| int use_arf_in_this_kf_group; |
| |
| int ni_frames; |
| |
| double tot_q; |
| /*!\endcond */ |
| |
| /*! |
| * Q used for last boosted (non leaf) frame |
| */ |
| int last_kf_qindex; |
| |
| /*! |
| * Average of q index of previous encoded frames in a sequence. |
| */ |
| int avg_frame_qindex[FRAME_TYPES]; |
| |
| #if CONFIG_FPMT_TEST |
| /*! |
| * Temporary variable used in simulating the delayed update of |
| * active_best_quality. |
| */ |
| int temp_active_best_quality[MAX_ARF_LAYERS + 1]; |
| |
| /*! |
| * Temporary variable used in simulating the delayed update of |
| * last_boosted_qindex. |
| */ |
| int temp_last_boosted_qindex; |
| |
| /*! |
| * Temporary variable used in simulating the delayed update of |
| * avg_q. |
| */ |
| double temp_avg_q; |
| |
| /*! |
| * Temporary variable used in simulating the delayed update of |
| * last_q. |
| */ |
| int temp_last_q[FRAME_TYPES]; |
| |
| /*! |
| * Temporary variable used in simulating the delayed update of |
| * projected_frame_size. |
| */ |
| int temp_projected_frame_size; |
| |
| /*! |
| * Temporary variable used in simulating the delayed update of |
| * total_actual_bits. |
| */ |
| int64_t temp_total_actual_bits; |
| |
| /*! |
| * Temporary variable used in simulating the delayed update of |
| * buffer_level. |
| */ |
| int64_t temp_buffer_level; |
| |
| /*! |
| * Temporary variable used in simulating the delayed update of |
| * vbr_bits_off_target. |
| */ |
| int64_t temp_vbr_bits_off_target; |
| |
| /*! |
| * Temporary variable used in simulating the delayed update of |
| * vbr_bits_off_target_fast. |
| */ |
| int64_t temp_vbr_bits_off_target_fast; |
| |
| /*! |
| * Temporary variable used in simulating the delayed update of |
| * rate_correction_factors. |
| */ |
| double temp_rate_correction_factors[RATE_FACTOR_LEVELS]; |
| |
| /*! |
| * Temporary variable used in simulating the delayed update of |
| * rate_error_estimate. |
| */ |
| int temp_rate_error_estimate; |
| |
| /*! |
| * Temporary variable used in simulating the delayed update of |
| * rolling_arf_group_target_bits. |
| */ |
| int temp_rolling_arf_group_target_bits; |
| |
| /*! |
| * Temporary variable used in simulating the delayed update of |
| * rolling_arf_group_actual_bits;. |
| */ |
| int temp_rolling_arf_group_actual_bits; |
| |
| /*! |
| * Temporary variable used in simulating the delayed update of |
| * bits_left;. |
| */ |
| int64_t temp_bits_left; |
| |
| /*! |
| * Temporary variable used in simulating the delayed update of |
| * extend_minq. |
| */ |
| int temp_extend_minq; |
| |
| /*! |
| * Temporary variable used in simulating the delayed update of |
| * extend_maxq. |
| */ |
| int temp_extend_maxq; |
| |
| /*! |
| * Temporary variable used in simulating the delayed update of |
| * extend_minq_fast. |
| */ |
| int temp_extend_minq_fast; |
| #endif |
| /*! |
| * Proposed minimum allowed Q different layers in a coding pyramid |
| */ |
| int active_best_quality[MAX_ARF_LAYERS + 1]; |
| |
| /*! |
| * Q used for last boosted (non leaf) frame (GF/KF/ARF) |
| */ |
| int last_boosted_qindex; |
| |
| /*! |
| * Average Q value of previous inter frames |
| */ |
| double avg_q; |
| |
| /*! |
| * Q used on last encoded frame of the given type. |
| */ |
| int last_q[FRAME_TYPES]; |
| |
| /*! |
| * Correction factors used to adjust the q estimate for a given target rate |
| * in the encode loop. |
| */ |
| double rate_correction_factors[RATE_FACTOR_LEVELS]; |
| |
| /*! |
| * Current total consumed bits. |
| */ |
| int64_t total_actual_bits; |
| |
| /*! |
| * Current total target bits. |
| */ |
| int64_t total_target_bits; |
| |
| /*! |
| * Current buffer level. |
| */ |
| int64_t buffer_level; |
| |
| /*! |
| * PCT rc error. |
| */ |
| int rate_error_estimate; |
| |
| /*! |
| * Error bits available from previously encoded frames. |
| */ |
| int64_t vbr_bits_off_target; |
| |
| /*! |
| * Error bits available from previously encoded frames undershoot. |
| */ |
| int64_t vbr_bits_off_target_fast; |
| |
| /*! |
| * Total bits deviated from the average frame target, from previously |
| * encoded frames. |
| */ |
| int64_t bits_off_target; |
| |
| /*! |
| * Rolling monitor target bits updated based on current frame target size. |
| */ |
| int rolling_target_bits; |
| |
| /*! |
| * Rolling monitor actual bits updated based on current frame final projected |
| * size. |
| */ |
| int rolling_actual_bits; |
| |
| /*! |
| * The history of qindex for each frame. |
| * Only used when RT_PASSIVE_STRATEGY = 1. |
| */ |
| int q_history[MAX_Q_HISTORY]; |
| } PRIMARY_RATE_CONTROL; |
| |
| /*!\cond */ |
| |
| struct AV1_COMP; |
| struct AV1EncoderConfig; |
| struct GF_GROUP; |
| |
| void av1_primary_rc_init(const struct AV1EncoderConfig *oxcf, |
| PRIMARY_RATE_CONTROL *p_rc); |
| |
| void av1_rc_init(const struct AV1EncoderConfig *oxcf, RATE_CONTROL *rc); |
| |
| int av1_estimate_bits_at_q(const struct AV1_COMP *cpi, int q, |
| double correction_factor); |
| |
| double av1_convert_qindex_to_q(int qindex, aom_bit_depth_t bit_depth); |
| |
| void av1_rc_init_minq_luts(void); |
| |
| int av1_rc_get_default_min_gf_interval(int width, int height, double framerate); |
| // Note av1_rc_get_default_max_gf_interval() requires the min_gf_interval to |
| // be passed in to ensure that the max_gf_interval returned is at least as bis |
| // as that. |
| int av1_rc_get_default_max_gf_interval(double framerate, int min_gf_interval); |
| |
| // Generally at the high level, the following flow is expected |
| // to be enforced for rate control: |
| // First call per frame, one of: |
| // av1_get_one_pass_rt_params() |
| // av1_get_second_pass_params() |
| // depending on the usage to set the rate control encode parameters desired. |
| // |
| // Then, call encode_frame_to_data_rate() to perform the |
| // actual encode. This function will in turn call encode_frame() |
| // one or more times, followed by: |
| // av1_rc_postencode_update_drop_frame() |
| // |
| // The majority of rate control parameters are only expected |
| // to be set in the av1_get_..._params() functions and |
| // updated during the av1_rc_postencode_update...() functions. |
| // The only exceptions are av1_rc_drop_frame() and |
| // av1_rc_update_rate_correction_factors() functions. |
| |
| // Functions to set parameters for encoding before the actual |
| // encode_frame_to_data_rate() function. |
| struct EncodeFrameInput; |
| |
| // Post encode update of the rate control parameters based |
| // on bytes used |
| void av1_rc_postencode_update(struct AV1_COMP *cpi, uint64_t bytes_used); |
| // Post encode update of the rate control parameters for dropped frames |
| void av1_rc_postencode_update_drop_frame(struct AV1_COMP *cpi); |
| |
| /*!\endcond */ |
| /*!\brief Updates the rate correction factor linking Q to output bits |
| * |
| * This function updates the Q rate correction factor after an encode |
| * cycle depending on whether we overshot or undershot the target rate. |
| * |
| * \ingroup rate_control |
| * \param[in] cpi Top level encoder instance structure |
| * \param[in] is_encode_stage Indicates if recode loop or post-encode |
| * \param[in] width Frame width |
| * \param[in] height Frame height |
| * |
| * \remark Updates the relevant rate correction factor in cpi->rc |
| */ |
| void av1_rc_update_rate_correction_factors(struct AV1_COMP *cpi, |
| int is_encode_stage, int width, |
| int height); |
| /*!\cond */ |
| |
| // Decide if we should drop this frame: For 1-pass CBR. |
| // Changes only the decimation count in the rate control structure |
| int av1_rc_drop_frame(struct AV1_COMP *cpi); |
| |
| // Computes frame size bounds. |
| void av1_rc_compute_frame_size_bounds(const struct AV1_COMP *cpi, |
| int this_frame_target, |
| int *frame_under_shoot_limit, |
| int *frame_over_shoot_limit); |
| |
| /*!\endcond */ |
| |
| /*!\brief Picks q and q bounds given the rate control parameters in \c cpi->rc. |
| * |
| * \ingroup rate_control |
| * \param[in] cpi Top level encoder structure |
| * \param[in] width Coded frame width |
| * \param[in] height Coded frame height |
| * \param[in] gf_index Index of this frame in the golden frame group |
| * \param[out] bottom_index Bottom bound for q index (best quality) |
| * \param[out] top_index Top bound for q index (worst quality) |
| * \return Returns selected q index to be used for encoding this frame. |
| * Also, updates \c rc->arf_q. |
| */ |
| int av1_rc_pick_q_and_bounds(struct AV1_COMP *cpi, int width, int height, |
| int gf_index, int *bottom_index, int *top_index); |
| |
| /*!\brief Estimates q to achieve a target bits per frame |
| * |
| * \ingroup rate_control |
| * \param[in] cpi Top level encoder instance structure |
| * \param[in] target_bits_per_frame Frame rate target |
| * \param[in] active_worst_quality Max Q allowed |
| * \param[in] active_best_quality Min Q allowed |
| * \param[in] width Frame width |
| * \param[in] height Frame height |
| * |
| * \return Returns a q index value |
| */ |
| int av1_rc_regulate_q(const struct AV1_COMP *cpi, int target_bits_per_frame, |
| int active_best_quality, int active_worst_quality, |
| int width, int height); |
| |
| /*!\cond */ |
| // Gets the appropriate bpmb ennumerator based on the frame and content type |
| int av1_get_bpmb_enumerator(FRAME_TYPE frame_type, |
| const int is_screen_content_type); |
| |
| // Estimates bits per mb for a given qindex and correction factor. |
| int av1_rc_bits_per_mb(const struct AV1_COMP *cpi, FRAME_TYPE frame_type, |
| int qindex, double correction_factor, |
| int accurate_estimate); |
| |
| // Clamping utilities for bitrate targets for iframes and pframes. |
| int av1_rc_clamp_iframe_target_size(const struct AV1_COMP *const cpi, |
| int64_t target); |
| int av1_rc_clamp_pframe_target_size(const struct AV1_COMP *const cpi, |
| int target, uint8_t frame_update_type); |
| |
| // Find q_index corresponding to desired_q, within [best_qindex, worst_qindex]. |
| // To be precise, 'q_index' is the smallest integer, for which the corresponding |
| // q >= desired_q. |
| // If no such q index is found, returns 'worst_qindex'. |
| int av1_find_qindex(double desired_q, aom_bit_depth_t bit_depth, |
| int best_qindex, int worst_qindex); |
| |
| // Computes a q delta (in "q index" terms) to get from a starting q value |
| // to a target q value |
| int av1_compute_qdelta(const RATE_CONTROL *rc, double qstart, double qtarget, |
| aom_bit_depth_t bit_depth); |
| |
| // Computes a q delta (in "q index" terms) to get from a starting q value |
| // to a value that should equate to the given rate ratio. |
| int av1_compute_qdelta_by_rate(const struct AV1_COMP *cpi, |
| FRAME_TYPE frame_type, int qindex, |
| double rate_target_ratio); |
| |
| int av1_frame_type_qdelta(const struct AV1_COMP *cpi, int q); |
| |
| void av1_rc_update_framerate(struct AV1_COMP *cpi, int width, int height); |
| |
| void av1_rc_set_gf_interval_range(const struct AV1_COMP *const cpi, |
| RATE_CONTROL *const rc); |
| |
| void av1_set_target_rate(struct AV1_COMP *cpi, int width, int height); |
| |
| int av1_resize_one_pass_cbr(struct AV1_COMP *cpi); |
| |
| void av1_rc_set_frame_target(struct AV1_COMP *cpi, int target, int width, |
| int height); |
| |
| void av1_adjust_gf_refresh_qp_one_pass_rt(struct AV1_COMP *cpi); |
| |
| void av1_set_rtc_reference_structure_one_layer(struct AV1_COMP *cpi, |
| int gf_update); |
| |
| /*!\endcond */ |
| /*!\brief Calculates how many bits to use for a P frame in one pass vbr |
| * |
| * \ingroup rate_control |
| * \callgraph |
| * \callergraph |
| * |
| * \param[in] cpi Top level encoder structure |
| * \param[in] frame_update_type Type of frame |
| * |
| * \return Returns the target number of bits for this frame. |
| */ |
| int av1_calc_pframe_target_size_one_pass_vbr( |
| const struct AV1_COMP *const cpi, FRAME_UPDATE_TYPE frame_update_type); |
| |
| /*!\brief Calculates how many bits to use for an i frame in one pass vbr |
| * |
| * \ingroup rate_control |
| * \callgraph |
| * \callergraph |
| * |
| * \param[in] cpi Top level encoder structure |
| * |
| * \return Returns the target number of bits for this frame. |
| */ |
| int av1_calc_iframe_target_size_one_pass_vbr(const struct AV1_COMP *const cpi); |
| |
| /*!\brief Calculates how many bits to use for a P frame in one pass cbr |
| * |
| * \ingroup rate_control |
| * \callgraph |
| * \callergraph |
| * |
| * \param[in] cpi Top level encoder structure |
| * \param[in] frame_update_type Type of frame |
| * |
| * \return Returns the target number of bits for this frame. |
| */ |
| int av1_calc_pframe_target_size_one_pass_cbr( |
| const struct AV1_COMP *cpi, FRAME_UPDATE_TYPE frame_update_type); |
| |
| /*!\brief Calculates how many bits to use for an i frame in one pass cbr |
| * |
| * \ingroup rate_control |
| * \callgraph |
| * \callergraph |
| * |
| * \param[in] cpi Top level encoder structure |
| * |
| * \return Returns the target number of bits for this frame. |
| */ |
| int av1_calc_iframe_target_size_one_pass_cbr(const struct AV1_COMP *cpi); |
| |
| /*!\brief Setup the rate control parameters for 1 pass real-time mode. |
| * |
| * - Sets the frame type and target frame size. |
| * - Sets the GF update. |
| * - Checks for scene change. |
| * - Sets the reference prediction structure for 1 layers (non-SVC). |
| * - Resets and updates are done for SVC. |
| * |
| * \ingroup rate_control |
| * \param[in] cpi Top level encoder structure |
| * \param[in] frame_type Encoder frame type |
| * \param[in] frame_input Current and last input source frames |
| * \param[in] frame_flags Encoder frame flags |
| * |
| * \remark Nothing is returned. Instead the settings computed in this |
| * function are set in: \c frame_params, \c cpi->common, \c cpi->rc, |
| * \c cpi->svc. |
| */ |
| void av1_get_one_pass_rt_params(struct AV1_COMP *cpi, |
| FRAME_TYPE *const frame_type, |
| const struct EncodeFrameInput *frame_input, |
| unsigned int frame_flags); |
| |
| /*!\brief Increase q on expected encoder overshoot, for CBR mode. |
| * |
| * Handles the case when encoder is expected to create a large frame: |
| * - q is increased to value closer to \c cpi->rc.worst_quality |
| * - avg_frame_qindex is reset |
| * - buffer levels are reset |
| * - rate correction factor is adjusted |
| * |
| * \ingroup rate_control |
| * \param[in] cpi Top level encoder structure |
| * \param[in] q Current q index |
| * |
| * \return q is returned, and updates are done to \c cpi->rc. |
| */ |
| int av1_encodedframe_overshoot_cbr(struct AV1_COMP *cpi, int *q); |
| |
| /*!\brief Compute the q_indices for a single frame. |
| * |
| * Intended to be used with AOM_Q mode. |
| * |
| * \param[in] base_q_index Base q index |
| * \param[in] gf_update_type GOP update type |
| * \param[in] gf_pyramid_level GOP level of the current frame |
| * \param[in] arf_q ARF q_index |
| * |
| * \return Returns the q_index for the current frame. |
| */ |
| int av1_q_mode_get_q_index(int base_q_index, int gf_update_type, |
| int gf_pyramid_level, int arf_q); |
| |
| /*!\brief Compute the q_indices for the ARF of a GOP. |
| * |
| * \param[in] base_q_index Base q index |
| * \param[in] gfu_boost GFU boost |
| * \param[in] bit_depth Bit depth |
| * \param[in] arf_boost_factor ARF boost factor |
| * |
| * \return Returns the q_index for the ARF frame. |
| */ |
| int av1_get_arf_q_index(int base_q_index, int gfu_boost, int bit_depth, |
| double arf_boost_factor); |
| |
| #if !CONFIG_REALTIME_ONLY |
| struct TplDepFrame; |
| /*!\brief Compute the q_indices for the ARF of a GOP in Q mode. |
| * |
| * \param[in] cpi Top level encoder structure |
| * \param[in] tpl_frame Tpl Frame stats |
| * |
| * \return Returns the q_index for the ARF frame. |
| */ |
| int av1_get_arf_q_index_q_mode(struct AV1_COMP *cpi, |
| struct TplDepFrame *tpl_frame); |
| #endif |
| #ifdef __cplusplus |
| } // extern "C" |
| #endif |
| |
| #endif // AOM_AV1_ENCODER_RATECTRL_H_ |