av1/arg_defs.c: fix some typos, formatting
Change-Id: Ib0f91cfe2ce757145238a91cd23b754087b49635
(cherry picked from commit 884af216355341c17af2848d8c248f6eea45dab5)
diff --git a/av1/arg_defs.c b/av1/arg_defs.c
index eb6346a..c517818 100644
--- a/av1/arg_defs.c
+++ b/av1/arg_defs.c
@@ -164,9 +164,9 @@
.verbosearg = ARG_DEF("v", "verbose", 0, "Show encoder parameters"),
.psnrarg = ARG_DEF(
NULL, "psnr", -1,
- "Show PSNR in status line"
+ "Show PSNR in status line "
"(0: Disable PSNR status line display, 1: PSNR calculated using input "
- "bit-depth (default), 2: PSNR calculated using stream bit-depth), "
+ "bit-depth (default), 2: PSNR calculated using stream bit-depth); "
"takes default option when arguments are not specified"),
.use_cfg = ARG_DEF("c", "cfg", 1, "Config file to use"),
.recontest = ARG_DEF_ENUM(NULL, "test-decode", 1,
@@ -182,20 +182,18 @@
ARG_DEF(NULL, "rate-hist", 1, "Show rate histogram (n-buckets)"),
.disable_warnings =
ARG_DEF(NULL, "disable-warnings", 0,
- "Disable warnings about potentially incorrect encode settings."),
+ "Disable warnings about potentially incorrect encode settings"),
.disable_warning_prompt =
ARG_DEF("y", "disable-warning-prompt", 0,
- "Display warnings, but do not prompt user to continue."),
- .bitdeptharg = ARG_DEF_ENUM(
- "b", "bit-depth", 1,
- "Bit depth for codec (8 for version <=1, 10 or 12 for version 2)",
- bitdepth_enum),
+ "Display warnings, but do not prompt user to continue"),
+ .bitdeptharg =
+ ARG_DEF_ENUM("b", "bit-depth", 1, "Bit depth for codec", bitdepth_enum),
.inbitdeptharg = ARG_DEF(NULL, "input-bit-depth", 1, "Bit depth of input"),
.input_chroma_subsampling_x = ARG_DEF(NULL, "input-chroma-subsampling-x", 1,
- "chroma subsampling x value."),
+ "Chroma subsampling x value"),
.input_chroma_subsampling_y = ARG_DEF(NULL, "input-chroma-subsampling-y", 1,
- "chroma subsampling y value."),
+ "Chroma subsampling y value"),
.usage = ARG_DEF("u", "usage", 1,
"Usage profile number to use (0: good, 1: rt, 2: allintra)"),
@@ -316,14 +314,14 @@
ARG_DEF(NULL, "tile-rows", 1, "Number of tile rows to use, log2"),
.enable_tpl_model = ARG_DEF(NULL, "enable-tpl-model", 1,
"RDO based on frame temporal dependency "
- "(0: off, 1: backward source based). "
- "This is required for deltaq mode."),
+ "(0: off, 1: backward source based); "
+ "required for deltaq mode"),
.enable_keyframe_filtering = ARG_DEF(
NULL, "enable-keyframe-filtering", 1,
- "Apply temporal filtering on key frame"
+ "Apply temporal filtering on key frame "
"(0: no filter, 1: filter without overlay (default), "
"2: filter with overlay - experimental, may break random access in "
- "players.)"),
+ "players)"),
.tile_width = ARG_DEF(NULL, "tile-width", 1, "Tile widths (comma separated)"),
.tile_height =
ARG_DEF(NULL, "tile-height", 1, "Tile heights (command separated)"),
@@ -335,8 +333,8 @@
"1: true (default), 2: disable for non-reference frames)"),
.enable_restoration = ARG_DEF(NULL, "enable-restoration", 1,
"Enable the loop restoration filter (0: false "
- "(default in Realtime mode), "
- "1: true (default in Non-realtime mode))"),
+ "(default in realtime mode), "
+ "1: true (default in non-realtime mode))"),
.enable_rect_partitions = ARG_DEF(NULL, "enable-rect-partitions", 1,
"Enable rectangular partitions "
"(0: false, 1: true (default))"),
@@ -349,9 +347,9 @@
.min_partition_size =
ARG_DEF(NULL, "min-partition-size", 1,
"Set min partition size "
- "(4:4x4, 8:8x8, 16:16x16, 32:32x32, 64:64x64, 128:128x128). "
- "On frame with 4k+ resolutions or higher speed settings, the min "
- "partition size will have a minimum of 8."),
+ "(4:4x4, 8:8x8, 16:16x16, 32:32x32, 64:64x64, 128:128x128); "
+ "with 4k+ resolutions or higher speed settings, min "
+ "partition size will have a minimum of 8"),
.max_partition_size =
ARG_DEF(NULL, "max-partition-size", 1,
"Set max partition size "
@@ -429,7 +427,7 @@
.enable_diagonal_intra =
ARG_DEF(NULL, "enable-diagonal-intra", 1,
"Enable diagonal (D45 to D203) intra prediction modes, which are "
- "a subset of directional modes. Has no effect if "
+ "a subset of directional modes; has no effect if "
"enable-directional-intra is 0 (0: false, 1: true (default))"),
.force_video_mode = ARG_DEF(NULL, "force-video-mode", 1,
"Force video mode (0: false, 1: true (default))"),
@@ -450,7 +448,7 @@
.disable_trellis_quant = ARG_DEF(
NULL, "disable-trellis-quant", 1,
"Disable trellis optimization of quantized coefficients (0: false "
- "1: true 2: true for rd search 3: true for estimate yrd serch "
+ "1: true 2: true for rd search 3: true for estimate yrd search "
"(default))"),
.enable_qm =
ARG_DEF(NULL, "enable-qm", 1,
@@ -489,7 +487,7 @@
"overrides maximum number of tile groups"),
.timing_info = ARG_DEF_ENUM(
NULL, "timing-info", 1,
- "Signal timing info in the bitstream (model unly works for no "
+ "Signal timing info in the bitstream (model only works for no "
"hidden frames, no super-res yet):",
timing_info_enum),
#if CONFIG_TUNE_VMAF
@@ -533,8 +531,8 @@
ARG_DEF(NULL, "deltaq-mode", 1,
"Delta qindex mode (0: off, 1: deltaq objective (default), "
"2: deltaq placeholder, 3: key frame visual quality, 4: user "
- "rating based visual quality optimization). "
- "Currently this requires enable-tpl-model as a prerequisite."),
+ "rating based visual quality optimization); "
+ "requires --enable-tpl-model=1"),
.deltaq_strength = ARG_DEF(NULL, "deltaq-strength", 1,
"Deltaq strength for"
" --deltaq-mode=4 (%)"),
@@ -549,18 +547,18 @@
ARG_DEF(NULL, "max-inter-rate", 1, "Max P-frame bitrate (pct)"),
.min_gf_interval = ARG_DEF(
NULL, "min-gf-interval", 1,
- "min gf/arf frame interval (default 0, indicating in-built behavior)"),
+ "Min gf/arf frame interval (default 0, indicating in-built behavior)"),
.max_gf_interval = ARG_DEF(
NULL, "max-gf-interval", 1,
- "max gf/arf frame interval (default 0, indicating in-built behavior)"),
+ "Max gf/arf frame interval (default 0, indicating in-built behavior)"),
.gf_min_pyr_height =
ARG_DEF(NULL, "gf-min-pyr-height", 1,
"Min height for GF group pyramid structure (0 (default) to 5)"),
.gf_max_pyr_height = ARG_DEF(
NULL, "gf-max-pyr-height", 1,
- "maximum height for GF group pyramid structure (0 to 5 (default))"),
+ "Maximum height for GF group pyramid structure (0 to 5 (default))"),
.max_reference_frames = ARG_DEF(NULL, "max-reference-frames", 1,
- "maximum number of reference frames allowed "
+ "Maximum number of reference frames allowed "
"per frame (3 to 7 (default))"),
.reduced_reference_set =
ARG_DEF(NULL, "reduced-reference-set", 1,
@@ -569,7 +567,7 @@
.target_seq_level_idx =
ARG_DEF(NULL, "target-seq-level-idx", 1,
"Target sequence level index. "
- "Possible values are in the form of \"ABxy\""
+ "Possible values are in the form of \"ABxy\". "
"AB: Operating point (OP) index, "
"xy: Target level index for the OP. "
"E.g. \"0\" means target level index 0 (2.0) for the 0th OP, "
@@ -604,7 +602,7 @@
.cdf_update_mode =
ARG_DEF(NULL, "cdf-update-mode", 1,
"CDF update mode for entropy coding "
- "(0: no CDF update, 1: update CDF on all frames(default), "
+ "(0: no CDF update, 1: update CDF on all frames (default), "
"2: selectively update CDF on some frames)"),
.superblock_size = ARG_DEF_ENUM(NULL, "sb-size", 1, "Superblock size to use",
@@ -614,7 +612,7 @@
ARG_DEF(NULL, "set-tier-mask", 1,
"Set bit mask to specify which tier each of the 32 possible "
"operating points conforms to. "
- "Bit value 0(defualt): Main Tier, 1: High Tier."),
+ "Bit value 0 (default): Main Tier, 1: High Tier."),
.use_fixed_qp_offsets =
ARG_DEF(NULL, "use-fixed-qp-offsets", 1,
@@ -637,10 +635,9 @@
"Set average corpus complexity per mb for single pass VBR using lap. "
"(0..10000), default is 0"),
- .fwd_kf_dist =
- ARG_DEF(NULL, "fwd-kf-dist", -1,
- "Set distance between forward keyframes. A value of -1 means no "
- "repetitive forward keyframes. Default is -1."),
+ .fwd_kf_dist = ARG_DEF(NULL, "fwd-kf-dist", -1,
+ "Set distance between forward keyframes. A value of "
+ "-1 (default) means no repetitive forward keyframes."),
.enable_tx_size_search = ARG_DEF(
NULL, "enable-tx-size-search", 1,
@@ -651,27 +648,27 @@
.loopfilter_control = ARG_DEF(
NULL, "loopfilter-control", 1,
"Control loop filtering "
- "(0: Loopfilter disabled for all frames, 1: Enable "
- "loopfilter for all frames (default), 2: Disable loopfilter for "
- "non-reference frames, 3: Disable loopfilter for frames with low motion"),
+ "(0: Loopfilter disabled for all frames, 1: Enable loopfilter for all "
+ "frames (default), 2: Disable loopfilter for non-reference frames, 3: "
+ "Disable loopfilter for frames with low motion)"),
.auto_intra_tools_off = ARG_DEF(
NULL, "auto-intra-tools-off", 1,
- "Automatically turn off several intra coding tools for allintra mode. "
- "Only in effect if --deltaq-mode=3."),
+ "Automatically turn off several intra coding tools for allintra mode; "
+ "only in effect if --deltaq-mode=3"),
.two_pass_input =
ARG_DEF(NULL, "two-pass-input", 1,
- "The input file for the second pass for three-pass encoding."),
+ "The input file for the second pass for three-pass encoding"),
.two_pass_output = ARG_DEF(
NULL, "two-pass-output", 1,
- "The output file for the first two passes for three-pass encoding."),
+ "The output file for the first two passes for three-pass encoding"),
.two_pass_width =
- ARG_DEF(NULL, "two-pass-width", 1, "The width of two-pass-input."),
+ ARG_DEF(NULL, "two-pass-width", 1, "The width of two-pass-input"),
.two_pass_height =
- ARG_DEF(NULL, "two-pass-height", 1, "The height of two-pass-input."),
+ ARG_DEF(NULL, "two-pass-height", 1, "The height of two-pass-input"),
.second_pass_log =
- ARG_DEF("spf", "second-pass-log", 1, "Log file from second pass."),
+ ARG_DEF("spf", "second-pass-log", 1, "Log file from second pass"),
.strict_level_conformance =
ARG_DEF(NULL, "strict-level-conformance", 1,
"When set to 1, exit the encoder when it fails to encode "
