| /* |
| * Copyright (c) 2019, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 2 Clause License and |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License |
| * was not distributed with this source code in the LICENSE file, you can |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open |
| * Media Patent License 1.0 was not distributed with this source code in the |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. |
| */ |
| |
| #include <stdint.h> |
| |
| #include "config/aom_config.h" |
| #include "config/aom_scale_rtcd.h" |
| |
| #include "aom/aom_codec.h" |
| #include "aom/aom_encoder.h" |
| |
| #include "aom_ports/system_state.h" |
| |
| #if CONFIG_MISMATCH_DEBUG |
| #include "aom_util/debug_util.h" |
| #endif // CONFIG_MISMATCH_DEBUG |
| |
| #include "av1/common/onyxc_int.h" |
| |
| #include "av1/encoder/encoder.h" |
| #include "av1/encoder/encode_strategy.h" |
| #include "av1/encoder/firstpass.h" |
| #include "av1/encoder/pass2_strategy.h" |
| #include "av1/encoder/temporal_filter.h" |
| #include "av1/encoder/tpl_model.h" |
| |
| void av1_configure_buffer_updates(AV1_COMP *const cpi, |
| EncodeFrameParams *const frame_params, |
| const FRAME_UPDATE_TYPE type, |
| int force_refresh_all) { |
| // NOTE(weitinglin): Should we define another function to take care of |
| // cpi->rc.is_$Source_Type to make this function as it is in the comment? |
| |
| cpi->rc.is_src_frame_alt_ref = 0; |
| cpi->rc.is_src_frame_internal_arf = 0; |
| |
| switch (type) { |
| case KF_UPDATE: |
| frame_params->refresh_last_frame = 1; |
| frame_params->refresh_golden_frame = 1; |
| frame_params->refresh_bwd_ref_frame = 1; |
| frame_params->refresh_alt2_ref_frame = 1; |
| frame_params->refresh_alt_ref_frame = 1; |
| break; |
| |
| case LF_UPDATE: |
| frame_params->refresh_last_frame = 1; |
| frame_params->refresh_golden_frame = 0; |
| frame_params->refresh_bwd_ref_frame = 0; |
| frame_params->refresh_alt2_ref_frame = 0; |
| frame_params->refresh_alt_ref_frame = 0; |
| break; |
| |
| case GF_UPDATE: |
| // TODO(zoeliu): To further investigate whether 'refresh_last_frame' is |
| // needed. |
| frame_params->refresh_last_frame = 1; |
| frame_params->refresh_golden_frame = 1; |
| frame_params->refresh_bwd_ref_frame = 0; |
| frame_params->refresh_alt2_ref_frame = 0; |
| frame_params->refresh_alt_ref_frame = 0; |
| break; |
| |
| case OVERLAY_UPDATE: |
| frame_params->refresh_last_frame = 0; |
| frame_params->refresh_golden_frame = 1; |
| frame_params->refresh_bwd_ref_frame = 0; |
| frame_params->refresh_alt2_ref_frame = 0; |
| frame_params->refresh_alt_ref_frame = 0; |
| |
| cpi->rc.is_src_frame_alt_ref = 1; |
| break; |
| |
| case ARF_UPDATE: |
| frame_params->refresh_last_frame = 0; |
| frame_params->refresh_golden_frame = 0; |
| // NOTE: BWDREF does not get updated along with ALTREF_FRAME. |
| frame_params->refresh_bwd_ref_frame = 0; |
| frame_params->refresh_alt2_ref_frame = 0; |
| frame_params->refresh_alt_ref_frame = 1; |
| break; |
| |
| case INTNL_OVERLAY_UPDATE: |
| frame_params->refresh_last_frame = 1; |
| frame_params->refresh_golden_frame = 0; |
| frame_params->refresh_bwd_ref_frame = 0; |
| frame_params->refresh_alt2_ref_frame = 0; |
| frame_params->refresh_alt_ref_frame = 0; |
| |
| cpi->rc.is_src_frame_alt_ref = 1; |
| cpi->rc.is_src_frame_internal_arf = 1; |
| break; |
| |
| case INTNL_ARF_UPDATE: |
| frame_params->refresh_last_frame = 0; |
| frame_params->refresh_golden_frame = 0; |
| if (cpi->oxcf.pass != 1) { |
| frame_params->refresh_bwd_ref_frame = 1; |
| frame_params->refresh_alt2_ref_frame = 0; |
| } else { |
| frame_params->refresh_bwd_ref_frame = 0; |
| frame_params->refresh_alt2_ref_frame = 1; |
| } |
| frame_params->refresh_alt_ref_frame = 0; |
| break; |
| |
| default: assert(0); break; |
| } |
| |
| if (cpi->ext_refresh_frame_flags_pending && |
| (cpi->oxcf.pass == 0 || cpi->oxcf.pass == 2)) { |
| frame_params->refresh_last_frame = cpi->ext_refresh_last_frame; |
| frame_params->refresh_golden_frame = cpi->ext_refresh_golden_frame; |
| frame_params->refresh_alt_ref_frame = cpi->ext_refresh_alt_ref_frame; |
| frame_params->refresh_bwd_ref_frame = cpi->ext_refresh_bwd_ref_frame; |
| frame_params->refresh_alt2_ref_frame = cpi->ext_refresh_alt2_ref_frame; |
| } |
| |
| if (force_refresh_all) { |
| frame_params->refresh_last_frame = 1; |
| frame_params->refresh_golden_frame = 1; |
| frame_params->refresh_bwd_ref_frame = 1; |
| frame_params->refresh_alt2_ref_frame = 1; |
| frame_params->refresh_alt_ref_frame = 1; |
| } |
| } |
| |
| static void set_additional_frame_flags(const AV1_COMMON *const cm, |
| unsigned int *const frame_flags) { |
| if (frame_is_intra_only(cm)) *frame_flags |= FRAMEFLAGS_INTRAONLY; |
| if (frame_is_sframe(cm)) *frame_flags |= FRAMEFLAGS_SWITCH; |
| if (cm->error_resilient_mode) *frame_flags |= FRAMEFLAGS_ERROR_RESILIENT; |
| } |
| |
| static INLINE void update_keyframe_counters(AV1_COMP *cpi) { |
| if (cpi->common.show_frame) { |
| if (!cpi->common.show_existing_frame || cpi->rc.is_src_frame_alt_ref || |
| cpi->common.current_frame.frame_type == KEY_FRAME) { |
| // If this is a show_existing_frame with a source other than altref, |
| // or if it is not a displayed forward keyframe, the keyframe update |
| // counters were incremented when it was originally encoded. |
| cpi->rc.frames_since_key++; |
| cpi->rc.frames_to_key--; |
| } |
| } |
| } |
| |
| static INLINE int is_frame_droppable(const AV1_COMP *const cpi) { |
| return !(cpi->refresh_alt_ref_frame || cpi->refresh_alt2_ref_frame || |
| cpi->refresh_bwd_ref_frame || cpi->refresh_golden_frame || |
| cpi->refresh_last_frame); |
| } |
| |
| static INLINE void update_frames_till_gf_update(AV1_COMP *cpi) { |
| // TODO(weitinglin): Updating this counter for is_frame_droppable |
| // is a work-around to handle the condition when a frame is drop. |
| // We should fix the cpi->common.show_frame flag |
| // instead of checking the other condition to update the counter properly. |
| if (cpi->common.show_frame || is_frame_droppable(cpi)) { |
| // Decrement count down till next gf |
| if (cpi->rc.frames_till_gf_update_due > 0) |
| cpi->rc.frames_till_gf_update_due--; |
| } |
| } |
| |
| #if !CONFIG_REALTIME_ONLY |
| static INLINE void update_gf_group_index(AV1_COMP *cpi) { |
| // Increment the gf group index ready for the next frame. If this is |
| // a show_existing_frame with a source other than altref, or if it is not |
| // a displayed forward keyframe, the index was incremented when it was |
| // originally encoded. |
| if (!cpi->common.show_existing_frame || cpi->rc.is_src_frame_alt_ref || |
| cpi->common.current_frame.frame_type == KEY_FRAME) { |
| ++cpi->gf_group.index; |
| } |
| } |
| #endif |
| |
| static void update_rc_counts(AV1_COMP *cpi) { |
| update_keyframe_counters(cpi); |
| update_frames_till_gf_update(cpi); |
| #if !CONFIG_REALTIME_ONLY |
| update_gf_group_index(cpi); |
| #endif |
| } |
| |
| // Get update type of the current frame. |
| static INLINE FRAME_UPDATE_TYPE get_frame_update_type(const AV1_COMP *cpi) { |
| const GF_GROUP *const gf_group = &cpi->gf_group; |
| if (gf_group->size == 0) { |
| // Special case 1: happens at the first frame of a video. |
| return KF_UPDATE; |
| } |
| if (gf_group->index == gf_group->size) { |
| // Special case 2: happens at the start of next GF group, or at the end of |
| // the key-frame group. So, not marked in gf_group->update_type array, but |
| // can be inferred implicitly. |
| return cpi->rc.source_alt_ref_active ? OVERLAY_UPDATE : GF_UPDATE; |
| } |
| // General case. |
| return gf_group->update_type[gf_group->index]; |
| } |
| |
| // Get ARF update index for the current frame. |
| // Returns 1 for internal ARF, and 0 otherwise (including top-level ARF). |
| static INLINE int get_arf_update_idx(const GF_GROUP *const gf_group) { |
| if (gf_group->index == gf_group->size) { |
| // Special case: happens at the start of a video, or at the start of next GF |
| // group, or at the end of the key-frame group. So, not marked in |
| // gf_group->arf_update_idx array, but can implicitly inferred be a |
| // top-level ARF. |
| return 0; |
| } |
| // General case. |
| return (gf_group->arf_update_idx[gf_group->index] > 0); |
| } |
| |
| // Note: the parameters related to OVERLAY_UPDATE will be taken care of in |
| // av1_get_second_pass_params(). |
| static void check_show_existing_frame(AV1_COMP *const cpi, |
| EncodeFrameParams *const frame_params) { |
| const GF_GROUP *const gf_group = &cpi->gf_group; |
| assert(gf_group->index <= gf_group->size); |
| AV1_COMMON *const cm = &cpi->common; |
| if (cm->show_existing_frame == 1) { |
| frame_params->show_existing_frame = 0; |
| } else { |
| const FRAME_UPDATE_TYPE frame_update_type = get_frame_update_type(cpi); |
| const int which_arf = get_arf_update_idx(gf_group); |
| if ((frame_update_type == OVERLAY_UPDATE || |
| frame_update_type == INTNL_OVERLAY_UPDATE) && |
| cpi->is_arf_filter_off[which_arf]) { |
| frame_params->show_existing_frame = 1; |
| frame_params->existing_fb_idx_to_show = |
| (frame_update_type == OVERLAY_UPDATE) |
| ? get_ref_frame_map_idx(cm, ALTREF_FRAME) |
| : get_ref_frame_map_idx(cm, BWDREF_FRAME); |
| |
| } else { |
| frame_params->show_existing_frame = 0; |
| } |
| } |
| } |
| |
| static void set_ext_overrides(AV1_COMP *const cpi, |
| EncodeFrameParams *const frame_params) { |
| // Overrides the defaults with the externally supplied values with |
| // av1_update_reference() and av1_update_entropy() calls |
| // Note: The overrides are valid only for the next frame passed |
| // to av1_encode_lowlevel() |
| |
| AV1_COMMON *const cm = &cpi->common; |
| |
| if (cpi->ext_use_s_frame) { |
| frame_params->frame_type = S_FRAME; |
| } |
| |
| if (cpi->ext_refresh_frame_context_pending) { |
| cm->refresh_frame_context = cpi->ext_refresh_frame_context; |
| cpi->ext_refresh_frame_context_pending = 0; |
| } |
| cm->allow_ref_frame_mvs = cpi->ext_use_ref_frame_mvs; |
| |
| frame_params->error_resilient_mode = cpi->ext_use_error_resilient; |
| // A keyframe is already error resilient and keyframes with |
| // error_resilient_mode interferes with the use of show_existing_frame |
| // when forward reference keyframes are enabled. |
| frame_params->error_resilient_mode &= frame_params->frame_type != KEY_FRAME; |
| // For bitstream conformance, s-frames must be error-resilient |
| frame_params->error_resilient_mode |= frame_params->frame_type == S_FRAME; |
| } |
| |
| static int get_ref_frame_flags(const AV1_COMP *const cpi) { |
| const AV1_COMMON *const cm = &cpi->common; |
| |
| const RefCntBuffer *last_buf = get_ref_frame_buf(cm, LAST_FRAME); |
| const RefCntBuffer *last2_buf = get_ref_frame_buf(cm, LAST2_FRAME); |
| const RefCntBuffer *last3_buf = get_ref_frame_buf(cm, LAST3_FRAME); |
| const RefCntBuffer *golden_buf = get_ref_frame_buf(cm, GOLDEN_FRAME); |
| const RefCntBuffer *bwd_buf = get_ref_frame_buf(cm, BWDREF_FRAME); |
| const RefCntBuffer *alt2_buf = get_ref_frame_buf(cm, ALTREF2_FRAME); |
| const RefCntBuffer *alt_buf = get_ref_frame_buf(cm, ALTREF_FRAME); |
| |
| // No.1 Priority: LAST_FRAME |
| const int last2_is_last = (last2_buf == last_buf); |
| const int last3_is_last = (last3_buf == last_buf); |
| const int gld_is_last = (golden_buf == last_buf); |
| const int bwd_is_last = (bwd_buf == last_buf); |
| const int alt2_is_last = (alt2_buf == last_buf); |
| const int alt_is_last = (alt_buf == last_buf); |
| |
| // No.2 Priority: ALTREF_FRAME |
| const int last2_is_alt = (last2_buf == alt_buf); |
| const int last3_is_alt = (last3_buf == alt_buf); |
| const int gld_is_alt = (golden_buf == alt_buf); |
| const int bwd_is_alt = (bwd_buf == alt_buf); |
| const int alt2_is_alt = (alt2_buf == alt_buf); |
| |
| // No.3 Priority: LAST2_FRAME |
| const int last3_is_last2 = (last3_buf == last2_buf); |
| const int gld_is_last2 = (golden_buf == last2_buf); |
| const int bwd_is_last2 = (bwd_buf == last2_buf); |
| const int alt2_is_last2 = (alt2_buf == last2_buf); |
| |
| // No.4 Priority: LAST3_FRAME |
| const int gld_is_last3 = (golden_buf == last3_buf); |
| const int bwd_is_last3 = (bwd_buf == last3_buf); |
| const int alt2_is_last3 = (alt2_buf == last3_buf); |
| |
| // No.5 Priority: GOLDEN_FRAME |
| const int bwd_is_gld = (bwd_buf == golden_buf); |
| const int alt2_is_gld = (alt2_buf == golden_buf); |
| |
| // No.6 Priority: BWDREF_FRAME |
| const int alt2_is_bwd = (alt2_buf == bwd_buf); |
| |
| // No.7 Priority: ALTREF2_FRAME |
| |
| // cpi->ext_ref_frame_flags allows certain reference types to be disabled |
| // by the external interface. These are set by av1_apply_encoding_flags(). |
| // Start with what the external interface allows, then suppress any reference |
| // types which we have found to be duplicates. |
| |
| int flags = cpi->ext_ref_frame_flags; |
| |
| if (cpi->rc.frames_till_gf_update_due == INT_MAX) flags &= ~AOM_GOLD_FLAG; |
| |
| if (alt_is_last) flags &= ~AOM_ALT_FLAG; |
| |
| if (last2_is_last || last2_is_alt) flags &= ~AOM_LAST2_FLAG; |
| |
| if (last3_is_last || last3_is_alt || last3_is_last2) flags &= ~AOM_LAST3_FLAG; |
| |
| if (gld_is_last || gld_is_last2 || gld_is_last3) { |
| flags &= ~AOM_GOLD_FLAG; |
| } |
| |
| if (!cpi->sf.use_fast_nonrd_pick_mode && gld_is_alt) { |
| flags &= ~AOM_GOLD_FLAG; |
| } |
| |
| if ((bwd_is_last || bwd_is_alt || bwd_is_last2 || bwd_is_last3 || bwd_is_gld)) |
| flags &= ~AOM_BWD_FLAG; |
| |
| if ((alt2_is_last || alt2_is_alt || alt2_is_last2 || alt2_is_last3 || |
| alt2_is_gld || alt2_is_bwd)) |
| flags &= ~AOM_ALT2_FLAG; |
| |
| return flags; |
| } |
| |
| static int get_current_frame_ref_type( |
| const AV1_COMP *const cpi, const EncodeFrameParams *const frame_params) { |
| // We choose the reference "type" of this frame from the flags which indicate |
| // which reference frames will be refreshed by it. More than one of these |
| // flags may be set, so the order here implies an order of precedence. This is |
| // just used to choose the primary_ref_frame (as the most recent reference |
| // buffer of the same reference-type as the current frame) |
| |
| const int intra_only = frame_params->frame_type == KEY_FRAME || |
| frame_params->frame_type == INTRA_ONLY_FRAME; |
| if (intra_only || frame_params->error_resilient_mode || |
| cpi->ext_use_primary_ref_none) |
| return REGULAR_FRAME; |
| else if (get_frame_update_type(cpi) == INTNL_ARF_UPDATE) |
| return INTERNAL_ARF_FRAME; |
| else if (frame_params->refresh_alt_ref_frame) |
| return ARF_FRAME; |
| else if (cpi->rc.is_src_frame_alt_ref) |
| return OVERLAY_FRAME; |
| else if (frame_params->refresh_golden_frame) |
| return GLD_FRAME; |
| else if (frame_params->refresh_bwd_ref_frame) |
| return BRF_FRAME; |
| else |
| return REGULAR_FRAME; |
| } |
| |
| static int choose_primary_ref_frame( |
| const AV1_COMP *const cpi, const EncodeFrameParams *const frame_params) { |
| const AV1_COMMON *const cm = &cpi->common; |
| |
| const int intra_only = frame_params->frame_type == KEY_FRAME || |
| frame_params->frame_type == INTRA_ONLY_FRAME; |
| if (intra_only || frame_params->error_resilient_mode || |
| cpi->ext_use_primary_ref_none) { |
| return PRIMARY_REF_NONE; |
| } |
| |
| // Find the most recent reference frame with the same reference type as the |
| // current frame |
| const FRAME_CONTEXT_INDEX current_ref_type = |
| get_current_frame_ref_type(cpi, frame_params); |
| int wanted_fb = cpi->fb_of_context_type[current_ref_type]; |
| |
| int primary_ref_frame = PRIMARY_REF_NONE; |
| for (int ref_frame = LAST_FRAME; ref_frame <= ALTREF_FRAME; ref_frame++) { |
| if (get_ref_frame_map_idx(cm, ref_frame) == wanted_fb) { |
| primary_ref_frame = ref_frame - LAST_FRAME; |
| } |
| } |
| return primary_ref_frame; |
| } |
| |
| static void update_fb_of_context_type( |
| const AV1_COMP *const cpi, const EncodeFrameParams *const frame_params, |
| int *const fb_of_context_type) { |
| const AV1_COMMON *const cm = &cpi->common; |
| |
| if (frame_is_intra_only(cm) || cm->error_resilient_mode || |
| cpi->ext_use_primary_ref_none) { |
| for (int i = 0; i < REF_FRAMES; i++) { |
| fb_of_context_type[i] = -1; |
| } |
| fb_of_context_type[REGULAR_FRAME] = |
| cm->show_frame ? get_ref_frame_map_idx(cm, GOLDEN_FRAME) |
| : get_ref_frame_map_idx(cm, ALTREF_FRAME); |
| } |
| |
| if (!encode_show_existing_frame(cm)) { |
| // Refresh fb_of_context_type[]: see encoder.h for explanation |
| if (cm->current_frame.frame_type == KEY_FRAME) { |
| // All ref frames are refreshed, pick one that will live long enough |
| fb_of_context_type[REGULAR_FRAME] = 0; |
| } else { |
| // If more than one frame is refreshed, it doesn't matter which one we |
| // pick so pick the first. LST sometimes doesn't refresh any: this is ok |
| const int current_frame_ref_type = |
| get_current_frame_ref_type(cpi, frame_params); |
| for (int i = 0; i < REF_FRAMES; i++) { |
| if (cm->current_frame.refresh_frame_flags & (1 << i)) { |
| fb_of_context_type[current_frame_ref_type] = i; |
| break; |
| } |
| } |
| } |
| } |
| } |
| |
| static int get_order_offset(const GF_GROUP *const gf_group, |
| const EncodeFrameParams *const frame_params) { |
| // shown frame by definition has order offset 0 |
| // show_existing_frame ignores order_offset and simply takes the order_hint |
| // from the reference frame being shown. |
| if (frame_params->show_frame || frame_params->show_existing_frame) return 0; |
| |
| const int arf_offset = |
| AOMMIN((MAX_GF_INTERVAL - 1), gf_group->arf_src_offset[gf_group->index]); |
| return AOMMIN((MAX_GF_INTERVAL - 1), arf_offset); |
| } |
| |
| static void adjust_frame_rate(AV1_COMP *cpi, |
| const struct lookahead_entry *source) { |
| int64_t this_duration; |
| int step = 0; |
| |
| // Clear down mmx registers |
| aom_clear_system_state(); |
| |
| if (source->ts_start == cpi->first_time_stamp_ever) { |
| this_duration = source->ts_end - source->ts_start; |
| step = 1; |
| } else { |
| int64_t last_duration = |
| cpi->last_end_time_stamp_seen - cpi->last_time_stamp_seen; |
| |
| this_duration = source->ts_end - cpi->last_end_time_stamp_seen; |
| |
| // do a step update if the duration changes by 10% |
| if (last_duration) |
| step = (int)((this_duration - last_duration) * 10 / last_duration); |
| } |
| |
| if (this_duration) { |
| if (step) { |
| av1_new_framerate(cpi, 10000000.0 / this_duration); |
| } else { |
| // Average this frame's rate into the last second's average |
| // frame rate. If we haven't seen 1 second yet, then average |
| // over the whole interval seen. |
| const double interval = AOMMIN( |
| (double)(source->ts_end - cpi->first_time_stamp_ever), 10000000.0); |
| double avg_duration = 10000000.0 / cpi->framerate; |
| avg_duration *= (interval - avg_duration + this_duration); |
| avg_duration /= interval; |
| |
| av1_new_framerate(cpi, 10000000.0 / avg_duration); |
| } |
| } |
| cpi->last_time_stamp_seen = source->ts_start; |
| cpi->last_end_time_stamp_seen = source->ts_end; |
| } |
| |
| // If this is an alt-ref, returns the offset of the source frame used |
| // as the arf midpoint. Otherwise, returns 0. |
| static int get_arf_src_index(AV1_COMP *cpi) { |
| RATE_CONTROL *const rc = &cpi->rc; |
| int arf_src_index = 0; |
| if (cpi->oxcf.pass != 1) { |
| const GF_GROUP *const gf_group = &cpi->gf_group; |
| if (get_frame_update_type(cpi) == ARF_UPDATE) { |
| assert(is_altref_enabled(cpi)); |
| arf_src_index = gf_group->arf_src_offset[gf_group->index]; |
| } |
| } else if (rc->source_alt_ref_pending) { |
| arf_src_index = rc->frames_till_gf_update_due; |
| } |
| return arf_src_index; |
| } |
| |
| // If this is an internal alt-ref, returns the offset of the source frame used |
| // as the internal arf midpoint. Otherwise, returns 0. |
| static int get_internal_arf_src_index(AV1_COMP *cpi) { |
| int internal_arf_src_index = 0; |
| if (cpi->oxcf.pass != 1) { |
| const GF_GROUP *const gf_group = &cpi->gf_group; |
| if (gf_group->update_type[gf_group->index] == INTNL_ARF_UPDATE) { |
| assert(is_altref_enabled(cpi) && cpi->internal_altref_allowed); |
| internal_arf_src_index = gf_group->arf_src_offset[gf_group->index]; |
| } |
| } |
| return internal_arf_src_index; |
| } |
| |
| // Called if this frame is an ARF or ARF2. Also handles forward-keyframes |
| // For an ARF set arf2=0, for ARF2 set arf2=1 |
| // temporal_filtered is set to 1 if we temporally filter the ARF frame, so that |
| // the correct post-filter buffer can be used. |
| static struct lookahead_entry *setup_arf_or_arf2( |
| AV1_COMP *const cpi, const int arf_src_index, const int arf2, |
| int *temporal_filtered, EncodeFrameParams *const frame_params) { |
| AV1_COMMON *const cm = &cpi->common; |
| RATE_CONTROL *const rc = &cpi->rc; |
| #if !CONFIG_REALTIME_ONLY |
| const AV1EncoderConfig *const oxcf = &cpi->oxcf; |
| #endif |
| |
| assert(arf_src_index <= rc->frames_to_key); |
| *temporal_filtered = 0; |
| |
| struct lookahead_entry *source = |
| av1_lookahead_peek(cpi->lookahead, arf_src_index); |
| |
| if (source != NULL) { |
| cm->showable_frame = 1; |
| cpi->alt_ref_source = source; |
| |
| // When arf_src_index == rc->frames_to_key, it indicates a fwd_kf |
| if (!arf2 && arf_src_index == rc->frames_to_key) { |
| // Skip temporal filtering and mark as intra_only if we have a fwd_kf |
| const int which_arf = get_arf_update_idx(&cpi->gf_group); |
| cpi->is_arf_filter_off[which_arf] = 1; |
| cpi->no_show_kf = 1; |
| } else { |
| #if !CONFIG_REALTIME_ONLY |
| if (oxcf->arnr_max_frames > 0) { |
| // Produce the filtered ARF frame. |
| av1_temporal_filter(cpi, arf_src_index); |
| aom_extend_frame_borders(&cpi->alt_ref_buffer, av1_num_planes(cm)); |
| *temporal_filtered = 1; |
| } |
| #endif |
| } |
| frame_params->show_frame = 0; |
| } |
| rc->source_alt_ref_pending = 0; |
| return source; |
| } |
| |
| // Determine whether there is a forced keyframe pending in the lookahead buffer |
| static int is_forced_keyframe_pending(struct lookahead_ctx *lookahead, |
| const int up_to_index) { |
| for (int i = 0; i <= up_to_index; i++) { |
| const struct lookahead_entry *e = av1_lookahead_peek(lookahead, i); |
| if (e == NULL) { |
| // We have reached the end of the lookahead buffer and not early-returned |
| // so there isn't a forced key-frame pending. |
| return 0; |
| } else if (e->flags == AOM_EFLAG_FORCE_KF) { |
| return 1; |
| } else { |
| continue; |
| } |
| } |
| return 0; // Never reached |
| } |
| |
| // Check if we should encode an ARF or internal ARF. If not, try a LAST |
| // Do some setup associated with the chosen source |
| // temporal_filtered, flush, and frame_update_type are outputs. |
| // Return the frame source, or NULL if we couldn't find one |
| static struct lookahead_entry *choose_frame_source( |
| AV1_COMP *const cpi, int *const temporal_filtered, int *const flush, |
| struct lookahead_entry **last_source, FRAME_UPDATE_TYPE *frame_update_type, |
| EncodeFrameParams *const frame_params) { |
| AV1_COMMON *const cm = &cpi->common; |
| struct lookahead_entry *source = NULL; |
| *temporal_filtered = 0; |
| |
| // Should we encode an alt-ref frame. |
| int arf_src_index = get_arf_src_index(cpi); |
| if (arf_src_index && |
| is_forced_keyframe_pending(cpi->lookahead, arf_src_index)) { |
| arf_src_index = 0; |
| *flush = 1; |
| } |
| |
| if (arf_src_index) { |
| source = setup_arf_or_arf2(cpi, arf_src_index, 0, temporal_filtered, |
| frame_params); |
| *frame_update_type = ARF_UPDATE; |
| } |
| |
| // Should we encode an internal Alt-ref frame (mutually exclusive to ARF) |
| arf_src_index = get_internal_arf_src_index(cpi); |
| if (arf_src_index && |
| is_forced_keyframe_pending(cpi->lookahead, arf_src_index)) { |
| arf_src_index = 0; |
| *flush = 1; |
| } |
| |
| if (arf_src_index) { |
| source = setup_arf_or_arf2(cpi, arf_src_index, 1, temporal_filtered, |
| frame_params); |
| *frame_update_type = INTNL_ARF_UPDATE; |
| } |
| |
| if (!source) { |
| // Get last frame source. |
| if (cm->current_frame.frame_number > 0) { |
| *last_source = av1_lookahead_peek(cpi->lookahead, -1); |
| } |
| // Read in the source frame. |
| source = av1_lookahead_pop(cpi->lookahead, *flush); |
| if (source == NULL) return NULL; |
| *frame_update_type = LF_UPDATE; // Default update type |
| frame_params->show_frame = 1; |
| |
| // Check to see if the frame should be encoded as an arf overlay. |
| if (cpi->alt_ref_source == source) { |
| *frame_update_type = OVERLAY_UPDATE; |
| cpi->alt_ref_source = NULL; |
| } |
| } |
| return source; |
| } |
| |
| // Don't allow a show_existing_frame to coincide with an error resilient or |
| // S-Frame. An exception can be made in the case of a keyframe, since it does |
| // not depend on any previous frames. |
| static int allow_show_existing(const AV1_COMP *const cpi, |
| unsigned int frame_flags) { |
| if (cpi->common.current_frame.frame_number == 0) return 0; |
| |
| const struct lookahead_entry *lookahead_src = |
| av1_lookahead_peek(cpi->lookahead, 0); |
| if (lookahead_src == NULL) return 1; |
| |
| const int is_error_resilient = |
| cpi->oxcf.error_resilient_mode || |
| (lookahead_src->flags & AOM_EFLAG_ERROR_RESILIENT); |
| const int is_s_frame = |
| cpi->oxcf.s_frame_mode || (lookahead_src->flags & AOM_EFLAG_SET_S_FRAME); |
| const int is_key_frame = |
| (cpi->rc.frames_to_key == 0) || (frame_flags & FRAMEFLAGS_KEY); |
| return !(is_error_resilient || is_s_frame) || is_key_frame; |
| } |
| |
| // Update frame_flags to tell the encoder's caller what sort of frame was |
| // encoded. |
| static void update_frame_flags(AV1_COMP *cpi, unsigned int *frame_flags) { |
| if (encode_show_existing_frame(&cpi->common)) { |
| *frame_flags &= ~FRAMEFLAGS_GOLDEN; |
| *frame_flags &= ~FRAMEFLAGS_BWDREF; |
| *frame_flags &= ~FRAMEFLAGS_ALTREF; |
| *frame_flags &= ~FRAMEFLAGS_KEY; |
| return; |
| } |
| |
| if (cpi->refresh_golden_frame == 1) { |
| *frame_flags |= FRAMEFLAGS_GOLDEN; |
| } else { |
| *frame_flags &= ~FRAMEFLAGS_GOLDEN; |
| } |
| |
| if (cpi->refresh_alt_ref_frame == 1) { |
| *frame_flags |= FRAMEFLAGS_ALTREF; |
| } else { |
| *frame_flags &= ~FRAMEFLAGS_ALTREF; |
| } |
| |
| if (cpi->refresh_bwd_ref_frame == 1) { |
| *frame_flags |= FRAMEFLAGS_BWDREF; |
| } else { |
| *frame_flags &= ~FRAMEFLAGS_BWDREF; |
| } |
| |
| if (cpi->common.current_frame.frame_type == KEY_FRAME) { |
| *frame_flags |= FRAMEFLAGS_KEY; |
| } else { |
| *frame_flags &= ~FRAMEFLAGS_KEY; |
| } |
| } |
| |
| #define DUMP_REF_FRAME_IMAGES 0 |
| |
| #if DUMP_REF_FRAME_IMAGES == 1 |
| static int dump_one_image(AV1_COMMON *cm, |
| const YV12_BUFFER_CONFIG *const ref_buf, |
| char *file_name) { |
| int h; |
| FILE *f_ref = NULL; |
| |
| if (ref_buf == NULL) { |
| printf("Frame data buffer is NULL.\n"); |
| return AOM_CODEC_MEM_ERROR; |
| } |
| |
| if ((f_ref = fopen(file_name, "wb")) == NULL) { |
| printf("Unable to open file %s to write.\n", file_name); |
| return AOM_CODEC_MEM_ERROR; |
| } |
| |
| // --- Y --- |
| for (h = 0; h < cm->height; ++h) { |
| fwrite(&ref_buf->y_buffer[h * ref_buf->y_stride], 1, cm->width, f_ref); |
| } |
| // --- U --- |
| for (h = 0; h < (cm->height >> 1); ++h) { |
| fwrite(&ref_buf->u_buffer[h * ref_buf->uv_stride], 1, (cm->width >> 1), |
| f_ref); |
| } |
| // --- V --- |
| for (h = 0; h < (cm->height >> 1); ++h) { |
| fwrite(&ref_buf->v_buffer[h * ref_buf->uv_stride], 1, (cm->width >> 1), |
| f_ref); |
| } |
| |
| fclose(f_ref); |
| |
| return AOM_CODEC_OK; |
| } |
| |
| static void dump_ref_frame_images(AV1_COMP *cpi) { |
| AV1_COMMON *const cm = &cpi->common; |
| MV_REFERENCE_FRAME ref_frame; |
| |
| for (ref_frame = LAST_FRAME; ref_frame <= ALTREF_FRAME; ++ref_frame) { |
| char file_name[256] = ""; |
| snprintf(file_name, sizeof(file_name), "/tmp/enc_F%d_ref_%d.yuv", |
| cm->current_frame.frame_number, ref_frame); |
| dump_one_image(cm, get_ref_frame_yv12_buf(cpi, ref_frame), file_name); |
| } |
| } |
| #endif // DUMP_REF_FRAME_IMAGES == 1 |
| |
| // Assign new_ref in the new mapping to point at the reference buffer pointed at |
| // by old_ref in the old_map. The new mapping is stored in *new_map, while the |
| // old map comes from cm->remapped_ref_idx[]. |
| static void assign_new_map(AV1_COMMON *const cm, int *new_map, int new_ref, |
| int old_ref) { |
| new_map[new_ref - LAST_FRAME] = cm->remapped_ref_idx[old_ref - LAST_FRAME]; |
| } |
| |
| // Generate a new reference frame mapping. This function updates |
| // cm->remapped_ref_idx[] depending on the frame_update_type of this frame. |
| // This determines which references (e.g. LAST_FRAME, ALTREF_FRAME) point at the |
| // 8 underlying buffers and, together with get_refresh_frame_flags(), implements |
| // our reference frame management strategy. |
| static void update_ref_frame_map(AV1_COMP *cpi, |
| FRAME_UPDATE_TYPE frame_update_type) { |
| AV1_COMMON *const cm = &cpi->common; |
| |
| // If check_frame_refs_short_signaling() decided to set |
| // frame_refs_short_signaling=1 then we update remapped_ref_idx[] here. Every |
| // reference will still map to the same RefCntBuffer (through ref_frame_map[]) |
| // after this, but that does not necessarily mean that remapped_ref_idx[] is |
| // unchanged. |
| if (cm->current_frame.frame_refs_short_signaling) { |
| const int lst_map_idx = get_ref_frame_map_idx(cm, LAST_FRAME); |
| const int gld_map_idx = get_ref_frame_map_idx(cm, GOLDEN_FRAME); |
| av1_set_frame_refs(cm, cm->remapped_ref_idx, lst_map_idx, gld_map_idx); |
| } |
| |
| // For shown keyframes and S-frames all buffers are refreshed, but we don't |
| // change any of the mapping. |
| if ((cm->current_frame.frame_type == KEY_FRAME && cm->show_frame) || |
| frame_is_sframe(cm)) { |
| return; |
| } |
| |
| // Initialize the new reference map as a copy of the old one. |
| int new_map[REF_FRAMES]; |
| memcpy(new_map, cm->remapped_ref_idx, sizeof(new_map)); |
| |
| // The reference management strategy is currently as follows. See |
| // gop_structure.c for more details of the structure and DOI |
| // 10.1109/DCC.2018.00045 for a higher-level explanation |
| // |
| // * ALTREF_FRAME and GOLDEN_FRAME are kept separate from the other |
| // references. When we code an ALTREF it refreshes the ALTREF buffer. When |
| // we code an OVERLAY the old GOLDEN becomes the new ALTREF and the old |
| // ALTREF (possibly refreshed by the OVERLAY) becomes the new GOLDEN. |
| // * LAST_FRAME, LAST2_FRAME, and LAST3_FRAME work like a FIFO. When we code |
| // a frame which does a last-frame update we pick a buffer to refresh and |
| // then point the LAST_FRAME reference at it. The old LAST_FRAME becomes |
| // LAST2_FRAME and the old LAST2_FRAME becomes LAST3_FRAME. The old |
| // LAST3_FRAME is re-used somewhere else. |
| // * BWDREF, ALTREF2, and EXTREF act like a stack structure, so we can |
| // "push" and "pop" internal alt-ref frames through the three references. |
| // * When we code a BRF or internal-ARF (they work the same in this |
| // structure) we push it onto the bwdref stack. Because we have a finite |
| // number of buffers, we actually refresh EXTREF, the bottom of the stack, |
| // and rotate the three references to make EXTREF the top. |
| // * When we code an INTNL_OVERLAY we refresh BWDREF, then pop it off of the |
| // bwdref stack and push it into the last-frame FIFO. The old LAST3 |
| // buffer gets pushed out of the last-frame FIFO and becomes the new |
| // EXTREF, bottom of the bwdref stack. |
| // * LAST_BIPRED just acts like a LAST_FRAME. The BWDREF will have an |
| // INTNL_OVERLAY and so can do its own ref map update. |
| // |
| // Note that this function runs *after* a frame has been coded, so it does not |
| // affect reference assignment of the current frame, it only affects future |
| // frames. This is why we refresh buffers using the old reference map before |
| // remapping them. |
| // |
| // show_existing_frames don't refresh any buffers or send the reference map to |
| // the decoder, but we can still update our reference map if we want to: the |
| // decoder will update its map next time we code a non-show-existing frame. |
| |
| if (frame_update_type == OVERLAY_UPDATE) { |
| // We want the old golden-frame to become our new ARF so swap the |
| // references. If cpi->preserve_arf_as_gld == 0 then we will refresh the |
| // old ARF before it becomes our new GF |
| assign_new_map(cm, new_map, ALTREF_FRAME, GOLDEN_FRAME); |
| assign_new_map(cm, new_map, GOLDEN_FRAME, ALTREF_FRAME); |
| } else if (frame_update_type == INTNL_OVERLAY_UPDATE && |
| encode_show_existing_frame(cm)) { |
| // Note that because encode_show_existing_frame(cm) we don't refresh any |
| // buffers. |
| // Pop BWDREF (shown as current frame) from the bwdref stack and make it |
| // the new LAST_FRAME. |
| assign_new_map(cm, new_map, LAST_FRAME, BWDREF_FRAME); |
| |
| // Progress the last-frame FIFO and the bwdref stack |
| assign_new_map(cm, new_map, LAST2_FRAME, LAST_FRAME); |
| assign_new_map(cm, new_map, LAST3_FRAME, LAST2_FRAME); |
| assign_new_map(cm, new_map, BWDREF_FRAME, ALTREF2_FRAME); |
| assign_new_map(cm, new_map, ALTREF2_FRAME, EXTREF_FRAME); |
| assign_new_map(cm, new_map, EXTREF_FRAME, LAST3_FRAME); |
| } else if (frame_update_type == INTNL_ARF_UPDATE && |
| !cm->show_existing_frame) { |
| // We want to push the current frame onto the bwdref stack. We refresh |
| // EXTREF (the old bottom of the stack) and rotate the references so it |
| // becomes BWDREF, the top of the stack. |
| assign_new_map(cm, new_map, BWDREF_FRAME, EXTREF_FRAME); |
| assign_new_map(cm, new_map, ALTREF2_FRAME, BWDREF_FRAME); |
| assign_new_map(cm, new_map, EXTREF_FRAME, ALTREF2_FRAME); |
| } |
| |
| if ((frame_update_type == LF_UPDATE || frame_update_type == GF_UPDATE || |
| frame_update_type == INTNL_OVERLAY_UPDATE) && |
| !encode_show_existing_frame(cm) && |
| (!cm->show_existing_frame || frame_update_type == INTNL_OVERLAY_UPDATE)) { |
| // A standard last-frame: we refresh the LAST3_FRAME buffer and then push it |
| // into the last-frame FIFO. |
| assign_new_map(cm, new_map, LAST3_FRAME, LAST2_FRAME); |
| assign_new_map(cm, new_map, LAST2_FRAME, LAST_FRAME); |
| assign_new_map(cm, new_map, LAST_FRAME, LAST3_FRAME); |
| } |
| |
| memcpy(cm->remapped_ref_idx, new_map, sizeof(new_map)); |
| |
| #if DUMP_REF_FRAME_IMAGES == 1 |
| // Dump out all reference frame images. |
| dump_ref_frame_images(cpi); |
| #endif // DUMP_REF_FRAME_IMAGES |
| } |
| |
| static int get_refresh_frame_flags(const AV1_COMP *const cpi, |
| const EncodeFrameParams *const frame_params, |
| FRAME_UPDATE_TYPE frame_update_type) { |
| const AV1_COMMON *const cm = &cpi->common; |
| |
| // Switch frames and shown key-frames overwrite all reference slots |
| if ((frame_params->frame_type == KEY_FRAME && frame_params->show_frame) || |
| frame_params->frame_type == S_FRAME) |
| return 0xFF; |
| |
| // show_existing_frames don't actually send refresh_frame_flags so set the |
| // flags to 0 to keep things consistent. |
| if (frame_params->show_existing_frame && |
| (!frame_params->error_resilient_mode || |
| frame_params->frame_type == KEY_FRAME)) { |
| return 0; |
| } |
| |
| int refresh_mask = 0; |
| |
| if (cpi->ext_refresh_frame_flags_pending) { |
| // Unfortunately the encoder interface reflects the old refresh_*_frame |
| // flags so we have to replicate the old refresh_frame_flags logic here in |
| // order to preserve the behaviour of the flag overrides. |
| refresh_mask |= cpi->ext_refresh_last_frame |
| << get_ref_frame_map_idx(cm, LAST3_FRAME); |
| refresh_mask |= cpi->ext_refresh_bwd_ref_frame |
| << get_ref_frame_map_idx(cm, EXTREF_FRAME); |
| refresh_mask |= cpi->ext_refresh_alt2_ref_frame |
| << get_ref_frame_map_idx(cm, ALTREF2_FRAME); |
| if (frame_update_type == OVERLAY_UPDATE) { |
| if (!cpi->preserve_arf_as_gld) { |
| refresh_mask |= cpi->ext_refresh_golden_frame |
| << get_ref_frame_map_idx(cm, ALTREF_FRAME); |
| } |
| } else { |
| refresh_mask |= cpi->ext_refresh_golden_frame |
| << get_ref_frame_map_idx(cm, GOLDEN_FRAME); |
| refresh_mask |= cpi->ext_refresh_alt_ref_frame |
| << get_ref_frame_map_idx(cm, ALTREF_FRAME); |
| } |
| return refresh_mask; |
| } |
| |
| // See update_ref_frame_map() for a thorough description of the reference |
| // buffer management strategy currently in use. This function just decides |
| // which buffers should be refreshed. |
| |
| switch (frame_update_type) { |
| case KF_UPDATE: |
| // Note that a real shown key-frame or S-frame refreshes every buffer, |
| // handled in a special case above. This case is for frames which aren't |
| // really a shown key-frame or S-frame but want to refresh all the |
| // important buffers. |
| refresh_mask |= 1 << get_ref_frame_map_idx(cm, LAST3_FRAME); |
| refresh_mask |= 1 << get_ref_frame_map_idx(cm, EXTREF_FRAME); |
| refresh_mask |= 1 << get_ref_frame_map_idx(cm, ALTREF2_FRAME); |
| refresh_mask |= 1 << get_ref_frame_map_idx(cm, GOLDEN_FRAME); |
| refresh_mask |= 1 << get_ref_frame_map_idx(cm, ALTREF_FRAME); |
| break; |
| case LF_UPDATE: |
| // Refresh LAST3, which becomes the new LAST while LAST becomes LAST2 |
| // and LAST2 becomes the new LAST3 (like a FIFO but circular) |
| refresh_mask |= 1 << get_ref_frame_map_idx(cm, LAST3_FRAME); |
| break; |
| case GF_UPDATE: |
| // In addition to refreshing the GF buffer, we refresh LAST3 and push it |
| // into the last-frame FIFO. |
| refresh_mask |= 1 << get_ref_frame_map_idx(cm, LAST3_FRAME); |
| refresh_mask |= 1 << get_ref_frame_map_idx(cm, GOLDEN_FRAME); |
| break; |
| case OVERLAY_UPDATE: |
| if (!cpi->preserve_arf_as_gld) { |
| // The result of our OVERLAY should become the GOLDEN_FRAME but we'd |
| // like to keep the old GOLDEN as our new ALTREF. So we refresh the |
| // ALTREF and swap around the ALTREF and GOLDEN references. |
| refresh_mask |= 1 << get_ref_frame_map_idx(cm, ALTREF_FRAME); |
| } |
| break; |
| case ARF_UPDATE: |
| refresh_mask |= 1 << get_ref_frame_map_idx(cm, ALTREF_FRAME); |
| break; |
| case INTNL_OVERLAY_UPDATE: |
| // INTNL_OVERLAY may be a show_existing_frame in which case we don't |
| // refresh anything and the BWDREF or ALTREF2 being shown becomes the new |
| // LAST_FRAME. But, if it's not a show_existing_frame, then we update as |
| // though it's a normal LF_UPDATE: we refresh LAST3 and |
| // update_ref_frame_map() makes that the new LAST_FRAME. |
| refresh_mask |= 1 << get_ref_frame_map_idx(cm, LAST3_FRAME); |
| break; |
| case INTNL_ARF_UPDATE: |
| if (cpi->oxcf.pass != 1) { |
| // Push the new ARF2 onto the bwdref stack. We refresh EXTREF which is |
| // at the bottom of the stack then move it to the top. |
| refresh_mask |= 1 << get_ref_frame_map_idx(cm, EXTREF_FRAME); |
| } else { |
| // ARF2 just gets stored in the ARF2 slot, no reference map change. |
| refresh_mask |= 1 << get_ref_frame_map_idx(cm, ALTREF2_FRAME); |
| } |
| break; |
| default: assert(0); break; |
| } |
| return refresh_mask; |
| } |
| |
| int av1_encode_strategy(AV1_COMP *const cpi, size_t *const size, |
| uint8_t *const dest, unsigned int *frame_flags, |
| int64_t *const time_stamp, int64_t *const time_end, |
| const aom_rational64_t *const timestamp_ratio, |
| int flush) { |
| const AV1EncoderConfig *const oxcf = &cpi->oxcf; |
| AV1_COMMON *const cm = &cpi->common; |
| |
| EncodeFrameInput frame_input; |
| EncodeFrameParams frame_params; |
| EncodeFrameResults frame_results; |
| memset(&frame_input, 0, sizeof(frame_input)); |
| memset(&frame_params, 0, sizeof(frame_params)); |
| memset(&frame_results, 0, sizeof(frame_results)); |
| |
| // TODO(sarahparker) finish bit allocation for one pass pyramid |
| if (oxcf->pass == 0 && oxcf->rc_mode != AOM_Q) |
| cpi->oxcf.gf_max_pyr_height = USE_ALTREF_FOR_ONE_PASS; |
| |
| if (oxcf->pass == 0 || oxcf->pass == 2) { |
| check_show_existing_frame(cpi, &frame_params); |
| frame_params.show_existing_frame &= allow_show_existing(cpi, *frame_flags); |
| } else { |
| frame_params.show_existing_frame = 0; |
| } |
| |
| int temporal_filtered = 0; |
| struct lookahead_entry *source = NULL; |
| struct lookahead_entry *last_source = NULL; |
| FRAME_UPDATE_TYPE frame_update_type; |
| if (frame_params.show_existing_frame) { |
| source = av1_lookahead_pop(cpi->lookahead, flush); |
| frame_update_type = LF_UPDATE; |
| } else { |
| source = choose_frame_source(cpi, &temporal_filtered, &flush, &last_source, |
| &frame_update_type, &frame_params); |
| } |
| |
| // In pass 0 and 2, we get the frame_update_type from gf_group |
| if (oxcf->pass != 1) { |
| frame_update_type = get_frame_update_type(cpi); |
| } |
| |
| if (source == NULL) { // If no source was found, we can't encode a frame. |
| #if !CONFIG_REALTIME_ONLY |
| if (flush && oxcf->pass == 1 && !cpi->twopass.first_pass_done) { |
| av1_end_first_pass(cpi); /* get last stats packet */ |
| cpi->twopass.first_pass_done = 1; |
| } |
| #endif |
| return -1; |
| } |
| |
| frame_input.source = temporal_filtered ? &cpi->alt_ref_buffer : &source->img; |
| frame_input.last_source = last_source != NULL ? &last_source->img : NULL; |
| frame_input.ts_duration = source->ts_end - source->ts_start; |
| |
| *time_stamp = source->ts_start; |
| *time_end = source->ts_end; |
| if (source->ts_start < cpi->first_time_stamp_ever) { |
| cpi->first_time_stamp_ever = source->ts_start; |
| cpi->last_end_time_stamp_seen = source->ts_start; |
| } |
| |
| av1_apply_encoding_flags(cpi, source->flags); |
| if (!frame_params.show_existing_frame) |
| *frame_flags = (source->flags & AOM_EFLAG_FORCE_KF) ? FRAMEFLAGS_KEY : 0; |
| |
| const int is_overlay = frame_params.show_existing_frame && |
| (frame_update_type == OVERLAY_UPDATE || |
| frame_update_type == INTNL_OVERLAY_UPDATE); |
| if (frame_params.show_frame || is_overlay) { |
| // Shown frames and arf-overlay frames need frame-rate considering |
| adjust_frame_rate(cpi, source); |
| } |
| |
| if (frame_params.show_existing_frame) { |
| // show_existing_frame implies this frame is shown! |
| frame_params.show_frame = 1; |
| } else { |
| if (cpi->film_grain_table) { |
| cm->cur_frame->film_grain_params_present = aom_film_grain_table_lookup( |
| cpi->film_grain_table, *time_stamp, *time_end, 0 /* =erase */, |
| &cm->film_grain_params); |
| } else { |
| cm->cur_frame->film_grain_params_present = |
| cm->seq_params.film_grain_params_present; |
| } |
| // only one operating point supported now |
| const int64_t pts64 = ticks_to_timebase_units(timestamp_ratio, *time_stamp); |
| if (pts64 < 0 || pts64 > UINT32_MAX) return AOM_CODEC_ERROR; |
| cpi->common.frame_presentation_time = (uint32_t)pts64; |
| } |
| |
| #if !CONFIG_REALTIME_ONLY |
| if (oxcf->pass != 1 && (!frame_params.show_existing_frame || is_overlay)) { |
| // GF_GROUP needs updating for arf overlays as well as non-show-existing |
| av1_get_second_pass_params(cpi, &frame_params, *frame_flags); |
| frame_update_type = get_frame_update_type(cpi); |
| } |
| #endif |
| |
| if (frame_params.show_existing_frame && |
| frame_params.frame_type != KEY_FRAME) { |
| // Force show-existing frames to be INTER, except forward keyframes |
| frame_params.frame_type = INTER_FRAME; |
| } |
| |
| // TODO(david.turner@argondesign.com): Move all the encode strategy |
| // (largely near av1_get_compressed_data) in here |
| |
| // TODO(david.turner@argondesign.com): Change all the encode strategy to |
| // modify frame_params instead of cm or cpi. |
| |
| // Per-frame encode speed. In theory this can vary, but things may have been |
| // written assuming speed-level will not change within a sequence, so this |
| // parameter should be used with caution. |
| frame_params.speed = oxcf->speed; |
| |
| // Work out some encoding parameters specific to the pass: |
| if (cpi->oxcf.pass == 0 && cpi->oxcf.aq_mode == CYCLIC_REFRESH_AQ) { |
| av1_cyclic_refresh_update_parameters(cpi); |
| } else if (oxcf->pass == 1) { |
| cpi->td.mb.e_mbd.lossless[0] = is_lossless_requested(&cpi->oxcf); |
| const int kf_requested = (cm->current_frame.frame_number == 0 || |
| (*frame_flags & FRAMEFLAGS_KEY)); |
| if (kf_requested && frame_update_type != OVERLAY_UPDATE && |
| frame_update_type != INTNL_OVERLAY_UPDATE) { |
| frame_params.frame_type = KEY_FRAME; |
| } else { |
| frame_params.frame_type = INTER_FRAME; |
| } |
| } else if (oxcf->pass == 2) { |
| #if CONFIG_MISMATCH_DEBUG |
| mismatch_move_frame_idx_w(); |
| #endif |
| #if TXCOEFF_COST_TIMER |
| cm->txcoeff_cost_timer = 0; |
| cm->txcoeff_cost_count = 0; |
| #endif |
| } |
| |
| if (oxcf->pass == 0 || oxcf->pass == 2) set_ext_overrides(cpi, &frame_params); |
| |
| // Shown keyframes and S frames refresh all reference buffers |
| const int force_refresh_all = |
| ((frame_params.frame_type == KEY_FRAME && frame_params.show_frame) || |
| frame_params.frame_type == S_FRAME) && |
| !frame_params.show_existing_frame; |
| |
| av1_configure_buffer_updates(cpi, &frame_params, frame_update_type, |
| force_refresh_all); |
| |
| if (oxcf->pass == 0 || oxcf->pass == 2) { |
| // Work out which reference frame slots may be used. |
| frame_params.ref_frame_flags = get_ref_frame_flags(cpi); |
| |
| frame_params.primary_ref_frame = |
| choose_primary_ref_frame(cpi, &frame_params); |
| frame_params.order_offset = get_order_offset(&cpi->gf_group, &frame_params); |
| |
| frame_params.refresh_frame_flags = |
| get_refresh_frame_flags(cpi, &frame_params, frame_update_type); |
| } |
| |
| // The way frame_params->remapped_ref_idx is setup is a placeholder. |
| // Currently, reference buffer assignment is done by update_ref_frame_map() |
| // which is called by high-level strategy AFTER encoding a frame. It modifies |
| // cm->remapped_ref_idx. If you want to use an alternative method to |
| // determine reference buffer assignment, just put your assignments into |
| // frame_params->remapped_ref_idx here and they will be used when encoding |
| // this frame. If frame_params->remapped_ref_idx is setup independently of |
| // cm->remapped_ref_idx then update_ref_frame_map() will have no effect. |
| memcpy(frame_params.remapped_ref_idx, cm->remapped_ref_idx, |
| REF_FRAMES * sizeof(*cm->remapped_ref_idx)); |
| |
| cpi->td.mb.e_mbd.delta_qindex = 0; |
| #if ENABLE_KF_TPL |
| if (oxcf->lag_in_frames > 0 && oxcf->pass != 1 && |
| frame_params.frame_type == KEY_FRAME && frame_params.show_frame) { |
| av1_configure_buffer_updates(cpi, &frame_params, frame_update_type, 0); |
| av1_set_frame_size(cpi, cm->width, cm->height); |
| av1_tpl_setup_stats(cpi, &frame_input); |
| } |
| #endif // ENABLE_KF_TPL |
| |
| if (!frame_params.show_existing_frame) { |
| cm->using_qmatrix = cpi->oxcf.using_qm; |
| cm->min_qmlevel = cpi->oxcf.qm_minlevel; |
| cm->max_qmlevel = cpi->oxcf.qm_maxlevel; |
| if (oxcf->lag_in_frames > 0 && oxcf->pass != 1) { |
| if (cpi->gf_group.index == 1 && cpi->oxcf.enable_tpl_model) { |
| av1_configure_buffer_updates(cpi, &frame_params, frame_update_type, 0); |
| av1_set_frame_size(cpi, cm->width, cm->height); |
| av1_tpl_setup_stats(cpi, &frame_input); |
| assert(cpi->num_gf_group_show_frames == 1); |
| } |
| } |
| } |
| |
| if (av1_encode(cpi, dest, &frame_input, &frame_params, &frame_results) != |
| AOM_CODEC_OK) { |
| return AOM_CODEC_ERROR; |
| } |
| if (oxcf->pass != 1) cpi->num_gf_group_show_frames += frame_params.show_frame; |
| |
| if (oxcf->pass == 0 || oxcf->pass == 2) { |
| // First pass doesn't modify reference buffer assignment or produce frame |
| // flags |
| update_frame_flags(cpi, frame_flags); |
| update_ref_frame_map(cpi, frame_update_type); |
| } |
| |
| #if !CONFIG_REALTIME_ONLY |
| if (oxcf->pass != 1) { |
| #if TXCOEFF_COST_TIMER |
| cm->cum_txcoeff_cost_timer += cm->txcoeff_cost_timer; |
| fprintf(stderr, |
| "\ntxb coeff cost block number: %ld, frame time: %ld, cum time %ld " |
| "in us\n", |
| cm->txcoeff_cost_count, cm->txcoeff_cost_timer, |
| cm->cum_txcoeff_cost_timer); |
| #endif |
| av1_twopass_postencode_update(cpi); |
| } |
| #endif // !CONFIG_REALTIME_ONLY |
| |
| if (oxcf->pass != 1) { |
| update_fb_of_context_type(cpi, &frame_params, cpi->fb_of_context_type); |
| set_additional_frame_flags(cm, frame_flags); |
| update_rc_counts(cpi); |
| } |
| |
| // Unpack frame_results: |
| *size = frame_results.size; |
| |
| // Leave a signal for a higher level caller about if this frame is droppable |
| if (*size > 0) { |
| cpi->droppable = is_frame_droppable(cpi); |
| } |
| |
| return AOM_CODEC_OK; |
| } |