| /* |
| * Copyright (c) 2010 The WebM project authors. All Rights Reserved. |
| * |
| * Use of this source code is governed by a BSD-style license |
| * that can be found in the LICENSE file in the root of the source |
| * tree. An additional intellectual property rights grant can be found |
| * in the file PATENTS. All contributing project authors may |
| * be found in the AUTHORS file in the root of the source tree. |
| */ |
| |
| #include <math.h> |
| #include "vpx_mem/vpx_mem.h" |
| |
| #include "vp9/encoder/vp9_onyx_int.h" |
| #include "vp9/encoder/vp9_quantize.h" |
| #include "vp9/common/vp9_quant_common.h" |
| |
| #include "vp9/common/vp9_seg_common.h" |
| |
| #ifdef ENC_DEBUG |
| extern int enc_debug; |
| #endif |
| |
| static INLINE int plane_idx(int plane) { |
| return plane == 0 ? 0 : |
| plane == 1 ? 16 : 20; |
| } |
| |
| void vp9_ht_quantize_b_4x4(MACROBLOCK *mb, int b_idx, TX_TYPE tx_type) { |
| MACROBLOCKD *const xd = &mb->e_mbd; |
| BLOCKD *const d = &xd->block[0]; |
| int i, rc, eob; |
| int zbin; |
| int x, y, z, sz; |
| int16_t *coeff_ptr = BLOCK_OFFSET(mb->plane[0].coeff, b_idx, 16); |
| // ht is luma-only |
| int16_t *qcoeff_ptr = BLOCK_OFFSET(xd->plane[0].qcoeff, b_idx, 16); |
| int16_t *dqcoeff_ptr = BLOCK_OFFSET(xd->plane[0].dqcoeff, b_idx, 16); |
| int16_t *zbin_boost_ptr = mb->plane[0].zrun_zbin_boost; |
| int16_t *zbin_ptr = mb->plane[0].zbin; |
| int16_t *round_ptr = mb->plane[0].round; |
| int16_t *quant_ptr = mb->plane[0].quant; |
| uint8_t *quant_shift_ptr = mb->plane[0].quant_shift; |
| int16_t *dequant_ptr = d->dequant; |
| int zbin_oq_value = mb->plane[0].zbin_extra; |
| const int *pt_scan = get_scan_4x4(tx_type); |
| |
| vpx_memset(qcoeff_ptr, 0, 32); |
| vpx_memset(dqcoeff_ptr, 0, 32); |
| |
| eob = -1; |
| |
| if (!mb->skip_block) { |
| for (i = 0; i < 16; i++) { |
| rc = pt_scan[i]; |
| z = coeff_ptr[rc]; |
| |
| zbin = zbin_ptr[rc] + *zbin_boost_ptr + zbin_oq_value; |
| zbin_boost_ptr++; |
| |
| sz = (z >> 31); // sign of z |
| x = (z ^ sz) - sz; // x = abs(z) |
| |
| if (x >= zbin) { |
| x += round_ptr[rc]; |
| y = (((x * quant_ptr[rc]) >> 16) + x) |
| >> quant_shift_ptr[rc]; // quantize (x) |
| x = (y ^ sz) - sz; // get the sign back |
| qcoeff_ptr[rc] = x; // write to destination |
| dqcoeff_ptr[rc] = x * dequant_ptr[rc]; // dequantized value |
| |
| if (y) { |
| eob = i; // last nonzero coeffs |
| zbin_boost_ptr = mb->plane[0].zrun_zbin_boost; // reset zero run len |
| } |
| } |
| } |
| } |
| |
| xd->plane[0].eobs[b_idx] = eob + 1; |
| } |
| |
| void vp9_regular_quantize_b_4x4(MACROBLOCK *mb, int b_idx, int y_blocks) { |
| MACROBLOCKD *const xd = &mb->e_mbd; |
| const struct plane_block_idx pb_idx = plane_block_idx(y_blocks, b_idx); |
| const int c_idx = plane_idx(pb_idx.plane); |
| BLOCKD *const d = &xd->block[c_idx]; |
| int i, rc, eob; |
| int zbin; |
| int x, y, z, sz; |
| int16_t *coeff_ptr = BLOCK_OFFSET(mb->plane[pb_idx.plane].coeff, |
| pb_idx.block, 16); |
| int16_t *qcoeff_ptr = BLOCK_OFFSET(xd->plane[pb_idx.plane].qcoeff, |
| pb_idx.block, 16); |
| int16_t *dqcoeff_ptr = BLOCK_OFFSET(xd->plane[pb_idx.plane].dqcoeff, |
| pb_idx.block, 16); |
| int16_t *zbin_boost_ptr = mb->plane[pb_idx.plane].zrun_zbin_boost; |
| int16_t *zbin_ptr = mb->plane[pb_idx.plane].zbin; |
| int16_t *round_ptr = mb->plane[pb_idx.plane].round; |
| int16_t *quant_ptr = mb->plane[pb_idx.plane].quant; |
| uint8_t *quant_shift_ptr = mb->plane[pb_idx.plane].quant_shift; |
| int16_t *dequant_ptr = d->dequant; |
| int zbin_oq_value = mb->plane[pb_idx.plane].zbin_extra; |
| |
| if (c_idx == 0) assert(pb_idx.plane == 0); |
| if (c_idx == 16) assert(pb_idx.plane == 1); |
| if (c_idx == 20) assert(pb_idx.plane == 2); |
| vpx_memset(qcoeff_ptr, 0, 32); |
| vpx_memset(dqcoeff_ptr, 0, 32); |
| |
| eob = -1; |
| |
| if (!mb->skip_block) { |
| for (i = 0; i < 16; i++) { |
| rc = vp9_default_zig_zag1d_4x4[i]; |
| z = coeff_ptr[rc]; |
| |
| zbin = zbin_ptr[rc] + *zbin_boost_ptr + zbin_oq_value; |
| zbin_boost_ptr++; |
| |
| sz = (z >> 31); // sign of z |
| x = (z ^ sz) - sz; // x = abs(z) |
| |
| if (x >= zbin) { |
| x += round_ptr[rc]; |
| |
| y = (((x * quant_ptr[rc]) >> 16) + x) |
| >> quant_shift_ptr[rc]; // quantize (x) |
| x = (y ^ sz) - sz; // get the sign back |
| qcoeff_ptr[rc] = x; // write to destination |
| dqcoeff_ptr[rc] = x * dequant_ptr[rc]; // dequantized value |
| |
| if (y) { |
| eob = i; // last nonzero coeffs |
| zbin_boost_ptr = mb->plane[pb_idx.plane].zrun_zbin_boost; |
| } |
| } |
| } |
| } |
| |
| xd->plane[pb_idx.plane].eobs[pb_idx.block] = eob + 1; |
| } |
| |
| void vp9_regular_quantize_b_8x8(MACROBLOCK *mb, int b_idx, TX_TYPE tx_type, |
| int y_blocks) { |
| MACROBLOCKD *const xd = &mb->e_mbd; |
| const struct plane_block_idx pb_idx = plane_block_idx(y_blocks, b_idx); |
| const int c_idx = plane_idx(pb_idx.plane); |
| int16_t *qcoeff_ptr = BLOCK_OFFSET(xd->plane[pb_idx.plane].qcoeff, |
| pb_idx.block, 16); |
| int16_t *dqcoeff_ptr = BLOCK_OFFSET(xd->plane[pb_idx.plane].dqcoeff, |
| pb_idx.block, 16); |
| int16_t *coeff_ptr = BLOCK_OFFSET(mb->plane[pb_idx.plane].coeff, |
| pb_idx.block, 16); |
| BLOCKD *const d = &xd->block[c_idx]; |
| const int *pt_scan = get_scan_8x8(tx_type); |
| |
| if (c_idx == 0) assert(pb_idx.plane == 0); |
| if (c_idx == 16) assert(pb_idx.plane == 1); |
| if (c_idx == 20) assert(pb_idx.plane == 2); |
| vpx_memset(qcoeff_ptr, 0, 64 * sizeof(int16_t)); |
| vpx_memset(dqcoeff_ptr, 0, 64 * sizeof(int16_t)); |
| |
| if (!mb->skip_block) { |
| int i, rc, eob; |
| int zbin; |
| int x, y, z, sz; |
| int zero_run; |
| int16_t *zbin_boost_ptr = mb->plane[pb_idx.plane].zrun_zbin_boost; |
| int16_t *zbin_ptr = mb->plane[pb_idx.plane].zbin; |
| int16_t *round_ptr = mb->plane[pb_idx.plane].round; |
| int16_t *quant_ptr = mb->plane[pb_idx.plane].quant; |
| uint8_t *quant_shift_ptr = mb->plane[pb_idx.plane].quant_shift; |
| int16_t *dequant_ptr = d->dequant; |
| int zbin_oq_value = mb->plane[pb_idx.plane].zbin_extra; |
| |
| eob = -1; |
| |
| // Special case for DC as it is the one triggering access in various |
| // tables: {zbin, quant, quant_shift, dequant}_ptr[rc != 0] |
| { |
| z = coeff_ptr[0]; |
| zbin = (zbin_ptr[0] + zbin_boost_ptr[0] + zbin_oq_value); |
| zero_run = 1; |
| |
| sz = (z >> 31); // sign of z |
| x = (z ^ sz) - sz; // x = abs(z) |
| |
| if (x >= zbin) { |
| x += (round_ptr[0]); |
| y = ((int)(((int)(x * quant_ptr[0]) >> 16) + x)) |
| >> quant_shift_ptr[0]; // quantize (x) |
| x = (y ^ sz) - sz; // get the sign back |
| qcoeff_ptr[0] = x; // write to destination |
| dqcoeff_ptr[0] = x * dequant_ptr[0]; // dequantized value |
| |
| if (y) { |
| eob = 0; // last nonzero coeffs |
| zero_run = 0; |
| } |
| } |
| } |
| for (i = 1; i < 64; i++) { |
| rc = pt_scan[i]; |
| z = coeff_ptr[rc]; |
| zbin = (zbin_ptr[1] + zbin_boost_ptr[zero_run] + zbin_oq_value); |
| // The original code was incrementing zero_run while keeping it at |
| // maximum 15 by adding "(zero_run < 15)". The same is achieved by |
| // removing the opposite of the sign mask of "(zero_run - 15)". |
| zero_run -= (zero_run - 15) >> 31; |
| |
| sz = (z >> 31); // sign of z |
| x = (z ^ sz) - sz; // x = abs(z) |
| |
| if (x >= zbin) { |
| x += (round_ptr[rc != 0]); |
| y = ((int)(((int)(x * quant_ptr[1]) >> 16) + x)) |
| >> quant_shift_ptr[1]; // quantize (x) |
| x = (y ^ sz) - sz; // get the sign back |
| qcoeff_ptr[rc] = x; // write to destination |
| dqcoeff_ptr[rc] = x * dequant_ptr[1]; // dequantized value |
| |
| if (y) { |
| eob = i; // last nonzero coeffs |
| zero_run = 0; |
| } |
| } |
| } |
| xd->plane[pb_idx.plane].eobs[pb_idx.block] = eob + 1; |
| } else { |
| xd->plane[pb_idx.plane].eobs[pb_idx.block] = 0; |
| } |
| } |
| |
| static void quantize(int16_t *zbin_boost_orig_ptr, |
| int16_t *coeff_ptr, int n_coeffs, int skip_block, |
| int16_t *zbin_ptr, int16_t *round_ptr, int16_t *quant_ptr, |
| uint8_t *quant_shift_ptr, |
| int16_t *qcoeff_ptr, int16_t *dqcoeff_ptr, |
| int16_t *dequant_ptr, int zbin_oq_value, |
| uint16_t *eob_ptr, |
| const int *scan, int mul) { |
| int i, rc, eob; |
| int zbin; |
| int x, y, z, sz; |
| int zero_run = 0; |
| int16_t *zbin_boost_ptr = zbin_boost_orig_ptr; |
| |
| vpx_memset(qcoeff_ptr, 0, n_coeffs*sizeof(int16_t)); |
| vpx_memset(dqcoeff_ptr, 0, n_coeffs*sizeof(int16_t)); |
| |
| eob = -1; |
| |
| if (!skip_block) { |
| for (i = 0; i < n_coeffs; i++) { |
| rc = scan[i]; |
| z = coeff_ptr[rc] * mul; |
| |
| zbin = (zbin_ptr[rc != 0] + zbin_boost_ptr[zero_run] + zbin_oq_value); |
| zero_run += (zero_run < 15); |
| |
| sz = (z >> 31); // sign of z |
| x = (z ^ sz) - sz; // x = abs(z) |
| |
| if (x >= zbin) { |
| x += (round_ptr[rc != 0]); |
| y = ((int)(((int)(x * quant_ptr[rc != 0]) >> 16) + x)) |
| >> quant_shift_ptr[rc != 0]; // quantize (x) |
| x = (y ^ sz) - sz; // get the sign back |
| qcoeff_ptr[rc] = x; // write to destination |
| dqcoeff_ptr[rc] = x * dequant_ptr[rc != 0] / mul; // dequantized value |
| |
| if (y) { |
| eob = i; // last nonzero coeffs |
| zero_run = 0; |
| } |
| } |
| } |
| } |
| |
| *eob_ptr = eob + 1; |
| } |
| |
| void vp9_regular_quantize_b_16x16(MACROBLOCK *mb, int b_idx, TX_TYPE tx_type, |
| int y_blocks) { |
| MACROBLOCKD *const xd = &mb->e_mbd; |
| const struct plane_block_idx pb_idx = plane_block_idx(y_blocks, b_idx); |
| const int c_idx = plane_idx(pb_idx.plane); |
| BLOCKD *const d = &xd->block[c_idx]; |
| const int *pt_scan = get_scan_16x16(tx_type); |
| |
| if (c_idx == 0) assert(pb_idx.plane == 0); |
| if (c_idx == 16) assert(pb_idx.plane == 1); |
| if (c_idx == 20) assert(pb_idx.plane == 2); |
| quantize(mb->plane[pb_idx.plane].zrun_zbin_boost, |
| BLOCK_OFFSET(mb->plane[pb_idx.plane].coeff, pb_idx.block, 16), |
| 256, mb->skip_block, |
| mb->plane[pb_idx.plane].zbin, |
| mb->plane[pb_idx.plane].round, |
| mb->plane[pb_idx.plane].quant, |
| mb->plane[pb_idx.plane].quant_shift, |
| BLOCK_OFFSET(xd->plane[pb_idx.plane].qcoeff, pb_idx.block, 16), |
| BLOCK_OFFSET(xd->plane[pb_idx.plane].dqcoeff, pb_idx.block, 16), |
| d->dequant, |
| mb->plane[pb_idx.plane].zbin_extra, |
| &xd->plane[pb_idx.plane].eobs[pb_idx.block], |
| pt_scan, 1); |
| } |
| |
| void vp9_regular_quantize_b_32x32(MACROBLOCK *mb, int b_idx, int y_blocks) { |
| MACROBLOCKD *const xd = &mb->e_mbd; |
| const struct plane_block_idx pb_idx = plane_block_idx(y_blocks, b_idx); |
| const int c_idx = plane_idx(pb_idx.plane); |
| BLOCKD *const d = &xd->block[c_idx]; |
| |
| if (c_idx == 0) assert(pb_idx.plane == 0); |
| if (c_idx == 16) assert(pb_idx.plane == 1); |
| if (c_idx == 20) assert(pb_idx.plane == 2); |
| quantize(mb->plane[pb_idx.plane].zrun_zbin_boost, |
| BLOCK_OFFSET(mb->plane[pb_idx.plane].coeff, pb_idx.block, 16), |
| 1024, mb->skip_block, |
| mb->plane[pb_idx.plane].zbin, |
| mb->plane[pb_idx.plane].round, |
| mb->plane[pb_idx.plane].quant, |
| mb->plane[pb_idx.plane].quant_shift, |
| BLOCK_OFFSET(xd->plane[pb_idx.plane].qcoeff, pb_idx.block, 16), |
| BLOCK_OFFSET(xd->plane[pb_idx.plane].dqcoeff, pb_idx.block, 16), |
| d->dequant, |
| mb->plane[pb_idx.plane].zbin_extra, |
| &xd->plane[pb_idx.plane].eobs[pb_idx.block], |
| vp9_default_zig_zag1d_32x32, 2); |
| } |
| |
| void vp9_quantize_sby_32x32(MACROBLOCK *x, BLOCK_SIZE_TYPE bsize) { |
| const int bw = 1 << (mb_width_log2(bsize) - 1); |
| const int bh = 1 << (mb_height_log2(bsize) - 1); |
| int n; |
| |
| for (n = 0; n < bw * bh; n++) |
| vp9_regular_quantize_b_32x32(x, n * 64, bw * bh * 64); |
| } |
| |
| void vp9_quantize_sby_16x16(MACROBLOCK *x, BLOCK_SIZE_TYPE bsize) { |
| const int bwl = mb_width_log2(bsize), bw = 1 << bwl; |
| const int bh = 1 << mb_height_log2(bsize); |
| const int bstride = 16 << bwl; |
| int n; |
| |
| for (n = 0; n < bw * bh; n++) { |
| const int x_idx = n & (bw - 1), y_idx = n >> bwl; |
| TX_TYPE tx_type = get_tx_type_16x16(&x->e_mbd, |
| 4 * x_idx + y_idx * bstride); |
| x->quantize_b_16x16(x, n * 16, tx_type, 16 * bw * bh); |
| } |
| } |
| |
| void vp9_quantize_sby_8x8(MACROBLOCK *x, BLOCK_SIZE_TYPE bsize) { |
| const int bwl = mb_width_log2(bsize) + 1, bw = 1 << bwl; |
| const int bh = 1 << (mb_height_log2(bsize) + 1); |
| const int bstride = 4 << bwl; |
| int n; |
| |
| for (n = 0; n < bw * bh; n++) { |
| const int x_idx = n & (bw - 1), y_idx = n >> bwl; |
| TX_TYPE tx_type = get_tx_type_8x8(&x->e_mbd, |
| 2 * x_idx + y_idx * bstride); |
| x->quantize_b_8x8(x, n * 4, tx_type, 4 * bw * bh); |
| } |
| } |
| |
| void vp9_quantize_sby_4x4(MACROBLOCK *x, BLOCK_SIZE_TYPE bsize) { |
| const int bwl = mb_width_log2(bsize) + 2, bw = 1 << bwl; |
| const int bh = 1 << (mb_height_log2(bsize) + 2); |
| MACROBLOCKD *const xd = &x->e_mbd; |
| int n; |
| |
| for (n = 0; n < bw * bh; n++) { |
| const TX_TYPE tx_type = get_tx_type_4x4(xd, n); |
| if (tx_type != DCT_DCT) { |
| vp9_ht_quantize_b_4x4(x, n, tx_type); |
| } else { |
| x->quantize_b_4x4(x, n, bw * bh); |
| } |
| } |
| } |
| |
| void vp9_quantize_sbuv_32x32(MACROBLOCK *x, BLOCK_SIZE_TYPE bsize) { |
| assert(bsize == BLOCK_SIZE_SB64X64); |
| vp9_regular_quantize_b_32x32(x, 256, 256); |
| vp9_regular_quantize_b_32x32(x, 320, 256); |
| } |
| |
| void vp9_quantize_sbuv_16x16(MACROBLOCK *x, BLOCK_SIZE_TYPE bsize) { |
| const int bwl = mb_width_log2(bsize); |
| const int bhl = mb_height_log2(bsize); |
| const int uoff = 16 << (bhl + bwl); |
| int i; |
| |
| for (i = uoff; i < ((uoff * 3) >> 1); i += 16) |
| x->quantize_b_16x16(x, i, DCT_DCT, uoff); |
| } |
| |
| void vp9_quantize_sbuv_8x8(MACROBLOCK *x, BLOCK_SIZE_TYPE bsize) { |
| const int bwl = mb_width_log2(bsize); |
| const int bhl = mb_height_log2(bsize); |
| const int uoff = 16 << (bhl + bwl); |
| int i; |
| |
| for (i = uoff; i < ((uoff * 3) >> 1); i += 4) |
| x->quantize_b_8x8(x, i, DCT_DCT, uoff); |
| } |
| |
| void vp9_quantize_sbuv_4x4(MACROBLOCK *x, BLOCK_SIZE_TYPE bsize) { |
| const int bwl = mb_width_log2(bsize); |
| const int bhl = mb_height_log2(bsize); |
| const int uoff = 16 << (bhl + bwl); |
| int i; |
| |
| for (i = uoff; i < ((uoff * 3) >> 1); i++) |
| x->quantize_b_4x4(x, i, uoff); |
| } |
| |
| /* quantize_b_pair function pointer in MACROBLOCK structure is set to one of |
| * these two C functions if corresponding optimized routine is not available. |
| * NEON optimized version implements currently the fast quantization for pair |
| * of blocks. */ |
| void vp9_regular_quantize_b_4x4_pair(MACROBLOCK *x, int b_idx1, int b_idx2, |
| int y_blocks) { |
| vp9_regular_quantize_b_4x4(x, b_idx1, y_blocks); |
| vp9_regular_quantize_b_4x4(x, b_idx2, y_blocks); |
| } |
| |
| static void invert_quant(int16_t *quant, uint8_t *shift, int d) { |
| unsigned t; |
| int l; |
| t = d; |
| for (l = 0; t > 1; l++) |
| t >>= 1; |
| t = 1 + (1 << (16 + l)) / d; |
| *quant = (int16_t)(t - (1 << 16)); |
| *shift = l; |
| } |
| |
| void vp9_init_quantizer(VP9_COMP *cpi) { |
| int i; |
| int quant_val; |
| int q; |
| |
| static const int zbin_boost[16] = { 0, 0, 0, 8, 8, 8, 10, 12, |
| 14, 16, 20, 24, 28, 32, 36, 40 }; |
| |
| for (q = 0; q < QINDEX_RANGE; q++) { |
| int qzbin_factor = (vp9_dc_quant(q, 0) < 148) ? 84 : 80; |
| int qrounding_factor = 48; |
| if (q == 0) { |
| qzbin_factor = 64; |
| qrounding_factor = 64; |
| } |
| // dc values |
| quant_val = vp9_dc_quant(q, cpi->common.y_dc_delta_q); |
| invert_quant(cpi->Y1quant[q] + 0, cpi->Y1quant_shift[q] + 0, quant_val); |
| cpi->Y1zbin[q][0] = ROUND_POWER_OF_TWO(qzbin_factor * quant_val, 7); |
| cpi->Y1round[q][0] = (qrounding_factor * quant_val) >> 7; |
| cpi->common.y_dequant[q][0] = quant_val; |
| cpi->zrun_zbin_boost_y1[q][0] = (quant_val * zbin_boost[0]) >> 7; |
| |
| quant_val = vp9_dc_uv_quant(q, cpi->common.uv_dc_delta_q); |
| invert_quant(cpi->UVquant[q] + 0, cpi->UVquant_shift[q] + 0, quant_val); |
| cpi->UVzbin[q][0] = ROUND_POWER_OF_TWO(qzbin_factor * quant_val, 7); |
| cpi->UVround[q][0] = (qrounding_factor * quant_val) >> 7; |
| cpi->common.uv_dequant[q][0] = quant_val; |
| cpi->zrun_zbin_boost_uv[q][0] = (quant_val * zbin_boost[0]) >> 7; |
| |
| // all the 4x4 ac values =; |
| for (i = 1; i < 16; i++) { |
| int rc = vp9_default_zig_zag1d_4x4[i]; |
| |
| quant_val = vp9_ac_yquant(q); |
| invert_quant(cpi->Y1quant[q] + rc, cpi->Y1quant_shift[q] + rc, quant_val); |
| cpi->Y1zbin[q][rc] = ROUND_POWER_OF_TWO(qzbin_factor * quant_val, 7); |
| cpi->Y1round[q][rc] = (qrounding_factor * quant_val) >> 7; |
| cpi->common.y_dequant[q][rc] = quant_val; |
| cpi->zrun_zbin_boost_y1[q][i] = |
| ROUND_POWER_OF_TWO(quant_val * zbin_boost[i], 7); |
| |
| quant_val = vp9_ac_uv_quant(q, cpi->common.uv_ac_delta_q); |
| invert_quant(cpi->UVquant[q] + rc, cpi->UVquant_shift[q] + rc, quant_val); |
| cpi->UVzbin[q][rc] = ROUND_POWER_OF_TWO(qzbin_factor * quant_val, 7); |
| cpi->UVround[q][rc] = (qrounding_factor * quant_val) >> 7; |
| cpi->common.uv_dequant[q][rc] = quant_val; |
| cpi->zrun_zbin_boost_uv[q][i] = |
| ROUND_POWER_OF_TWO(quant_val * zbin_boost[i], 7); |
| } |
| } |
| } |
| |
| void vp9_mb_init_quantizer(VP9_COMP *cpi, MACROBLOCK *x) { |
| int i; |
| int qindex; |
| MACROBLOCKD *xd = &x->e_mbd; |
| int zbin_extra; |
| int segment_id = xd->mode_info_context->mbmi.segment_id; |
| |
| // Select the baseline MB Q index allowing for any segment level change. |
| if (vp9_segfeature_active(xd, segment_id, SEG_LVL_ALT_Q)) { |
| if (xd->mb_segment_abs_delta == SEGMENT_ABSDATA) { |
| // Abs Value |
| qindex = vp9_get_segdata(xd, segment_id, SEG_LVL_ALT_Q); |
| } else { |
| // Delta Value |
| qindex = cpi->common.base_qindex + |
| vp9_get_segdata(xd, segment_id, SEG_LVL_ALT_Q); |
| |
| // Clamp to valid range |
| qindex = clamp(qindex, 0, MAXQ); |
| } |
| } else { |
| qindex = cpi->common.base_qindex; |
| } |
| |
| // Y |
| zbin_extra = (cpi->common.y_dequant[qindex][1] * |
| (cpi->zbin_mode_boost + x->act_zbin_adj)) >> 7; |
| |
| x->plane[0].quant = cpi->Y1quant[qindex]; |
| x->plane[0].quant_shift = cpi->Y1quant_shift[qindex]; |
| x->plane[0].zbin = cpi->Y1zbin[qindex]; |
| x->plane[0].round = cpi->Y1round[qindex]; |
| x->plane[0].zrun_zbin_boost = cpi->zrun_zbin_boost_y1[qindex]; |
| x->plane[0].zbin_extra = (int16_t)zbin_extra; |
| for (i = 0; i < 16; i++) |
| x->e_mbd.block[i].dequant = cpi->common.y_dequant[qindex]; |
| |
| // UV |
| zbin_extra = (cpi->common.uv_dequant[qindex][1] * |
| (cpi->zbin_mode_boost + x->act_zbin_adj)) >> 7; |
| |
| for (i = 1; i < 3; i++) { |
| x->plane[i].quant = cpi->UVquant[qindex]; |
| x->plane[i].quant_shift = cpi->UVquant_shift[qindex]; |
| x->plane[i].zbin = cpi->UVzbin[qindex]; |
| x->plane[i].round = cpi->UVround[qindex]; |
| x->plane[i].zrun_zbin_boost = cpi->zrun_zbin_boost_uv[qindex]; |
| x->plane[i].zbin_extra = (int16_t)zbin_extra; |
| } |
| for (i = 16; i < 24; i++) |
| x->e_mbd.block[i].dequant = cpi->common.uv_dequant[qindex]; |
| |
| x->skip_block = vp9_segfeature_active(xd, segment_id, SEG_LVL_SKIP); |
| |
| /* save this macroblock QIndex for vp9_update_zbin_extra() */ |
| x->e_mbd.q_index = qindex; |
| } |
| |
| void vp9_update_zbin_extra(VP9_COMP *cpi, MACROBLOCK *x) { |
| const int qindex = x->e_mbd.q_index; |
| const int y_zbin_extra = (cpi->common.y_dequant[qindex][1] * |
| (cpi->zbin_mode_boost + x->act_zbin_adj)) >> 7; |
| const int uv_zbin_extra = (cpi->common.uv_dequant[qindex][1] * |
| (cpi->zbin_mode_boost + x->act_zbin_adj)) >> 7; |
| |
| x->plane[0].zbin_extra = (int16_t)y_zbin_extra; |
| x->plane[1].zbin_extra = (int16_t)uv_zbin_extra; |
| x->plane[2].zbin_extra = (int16_t)uv_zbin_extra; |
| } |
| |
| void vp9_frame_init_quantizer(VP9_COMP *cpi) { |
| // Clear Zbin mode boost for default case |
| cpi->zbin_mode_boost = 0; |
| |
| // MB level quantizer setup |
| vp9_mb_init_quantizer(cpi, &cpi->mb); |
| } |
| |
| void vp9_set_quantizer(struct VP9_COMP *cpi, int Q) { |
| VP9_COMMON *cm = &cpi->common; |
| |
| cm->base_qindex = Q; |
| |
| // Set lossless mode |
| if (cm->base_qindex <= 4) |
| cm->base_qindex = 0; |
| |
| // if any of the delta_q values are changing update flag will |
| // have to be set. |
| cm->y_dc_delta_q = 0; |
| cm->uv_dc_delta_q = 0; |
| cm->uv_ac_delta_q = 0; |
| |
| // quantizer has to be reinitialized if any delta_q changes. |
| // As there are not any here for now this is inactive code. |
| // if(update) |
| // vp9_init_quantizer(cpi); |
| } |