| /* |
| * Copyright (c) 2016, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 2 Clause License and |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License |
| * was not distributed with this source code in the LICENSE file, you can |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open |
| * Media Patent License 1.0 was not distributed with this source code in the |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. |
| */ |
| |
| #ifndef AOM_AV1_COMMON_RESTORATION_H_ |
| #define AOM_AV1_COMMON_RESTORATION_H_ |
| |
| #include "aom_ports/mem.h" |
| #include "config/aom_config.h" |
| |
| #include "av1/common/blockd.h" |
| #include "av1/common/enums.h" |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /*! @file */ |
| |
| /*!\cond */ |
| |
| // Border for Loop restoration buffer |
| #define AOM_RESTORATION_FRAME_BORDER 32 |
| #define CLIP(x, lo, hi) ((x) < (lo) ? (lo) : (x) > (hi) ? (hi) : (x)) |
| #define RINT(x) ((x) < 0 ? (int)((x)-0.5) : (int)((x) + 0.5)) |
| |
| #define RESTORATION_PROC_UNIT_SIZE 64 |
| |
| // Filter stripe grid offset upwards compared to the superblock grid |
| #define RESTORATION_UNIT_OFFSET 8 |
| |
| #define SGRPROJ_BORDER_VERT 3 // Vertical border used for Sgr |
| #define SGRPROJ_BORDER_HORZ 3 // Horizontal border used for Sgr |
| |
| #define WIENER_BORDER_VERT 2 // Vertical border used for Wiener |
| #define WIENER_HALFWIN 3 |
| #define WIENER_BORDER_HORZ (WIENER_HALFWIN) // Horizontal border for Wiener |
| |
| // RESTORATION_BORDER_VERT determines line buffer requirement for LR. |
| // Should be set at the max of SGRPROJ_BORDER_VERT and WIENER_BORDER_VERT. |
| // Note the line buffer needed is twice the value of this macro. |
| #if SGRPROJ_BORDER_VERT >= WIENER_BORDER_VERT |
| #define RESTORATION_BORDER_VERT (SGRPROJ_BORDER_VERT) |
| #else |
| #define RESTORATION_BORDER_VERT (WIENER_BORDER_VERT) |
| #endif // SGRPROJ_BORDER_VERT >= WIENER_BORDER_VERT |
| |
| #if SGRPROJ_BORDER_HORZ >= WIENER_BORDER_HORZ |
| #define RESTORATION_BORDER_HORZ (SGRPROJ_BORDER_HORZ) |
| #else |
| #define RESTORATION_BORDER_HORZ (WIENER_BORDER_HORZ) |
| #endif // SGRPROJ_BORDER_VERT >= WIENER_BORDER_VERT |
| |
| // How many border pixels do we need for each processing unit? |
| #define RESTORATION_BORDER 3 |
| |
| // How many rows of deblocked pixels do we save above/below each processing |
| // stripe? |
| #define RESTORATION_CTX_VERT 2 |
| |
| // Additional pixels to the left and right in above/below buffers |
| // It is RESTORATION_BORDER_HORZ rounded up to get nicer buffer alignment |
| #define RESTORATION_EXTRA_HORZ 4 |
| |
| // Pad up to 20 more (may be much less is needed) |
| #define RESTORATION_PADDING 20 |
| #define RESTORATION_PROC_UNIT_PELS \ |
| ((RESTORATION_PROC_UNIT_SIZE + RESTORATION_BORDER_HORZ * 2 + \ |
| RESTORATION_PADDING) * \ |
| (RESTORATION_PROC_UNIT_SIZE + RESTORATION_BORDER_VERT * 2 + \ |
| RESTORATION_PADDING)) |
| |
| #define RESTORATION_UNITSIZE_MAX 256 |
| #define RESTORATION_UNITPELS_HORZ_MAX \ |
| (RESTORATION_UNITSIZE_MAX * 3 / 2 + 2 * RESTORATION_BORDER_HORZ + 16) |
| #define RESTORATION_UNITPELS_VERT_MAX \ |
| ((RESTORATION_UNITSIZE_MAX * 3 / 2 + 2 * RESTORATION_BORDER_VERT + \ |
| RESTORATION_UNIT_OFFSET)) |
| #define RESTORATION_UNITPELS_MAX \ |
| (RESTORATION_UNITPELS_HORZ_MAX * RESTORATION_UNITPELS_VERT_MAX) |
| |
| // Two 32-bit buffers needed for the restored versions from two filters |
| // TODO(debargha, rupert): Refactor to not need the large tilesize to be stored |
| // on the decoder side. |
| #define SGRPROJ_TMPBUF_SIZE (RESTORATION_UNITPELS_MAX * 2 * sizeof(int32_t)) |
| |
| #define SGRPROJ_EXTBUF_SIZE (0) |
| #define SGRPROJ_PARAMS_BITS 4 |
| #define SGRPROJ_PARAMS (1 << SGRPROJ_PARAMS_BITS) |
| |
| // Precision bits for projection |
| #define SGRPROJ_PRJ_BITS 7 |
| // Restoration precision bits generated higher than source before projection |
| #define SGRPROJ_RST_BITS 4 |
| // Internal precision bits for core selfguided_restoration |
| #define SGRPROJ_SGR_BITS 8 |
| #define SGRPROJ_SGR (1 << SGRPROJ_SGR_BITS) |
| |
| #define SGRPROJ_PRJ_MIN0 (-(1 << SGRPROJ_PRJ_BITS) * 3 / 4) |
| #define SGRPROJ_PRJ_MAX0 (SGRPROJ_PRJ_MIN0 + (1 << SGRPROJ_PRJ_BITS) - 1) |
| #define SGRPROJ_PRJ_MIN1 (-(1 << SGRPROJ_PRJ_BITS) / 4) |
| #define SGRPROJ_PRJ_MAX1 (SGRPROJ_PRJ_MIN1 + (1 << SGRPROJ_PRJ_BITS) - 1) |
| |
| #define SGRPROJ_PRJ_SUBEXP_K 4 |
| |
| #define SGRPROJ_BITS (SGRPROJ_PRJ_BITS * 2 + SGRPROJ_PARAMS_BITS) |
| |
| #define MAX_RADIUS 2 // Only 1, 2, 3 allowed |
| #define MAX_NELEM ((2 * MAX_RADIUS + 1) * (2 * MAX_RADIUS + 1)) |
| #define SGRPROJ_MTABLE_BITS 20 |
| #define SGRPROJ_RECIP_BITS 12 |
| |
| #define WIENER_HALFWIN1 (WIENER_HALFWIN + 1) |
| #define WIENER_WIN (2 * WIENER_HALFWIN + 1) |
| #define WIENER_WIN2 ((WIENER_WIN) * (WIENER_WIN)) |
| #define WIENER_TMPBUF_SIZE (0) |
| #define WIENER_EXTBUF_SIZE (0) |
| |
| // If WIENER_WIN_CHROMA == WIENER_WIN - 2, that implies 5x5 filters are used for |
| // chroma. To use 7x7 for chroma set WIENER_WIN_CHROMA to WIENER_WIN. |
| #define WIENER_WIN_CHROMA (WIENER_WIN - 2) |
| #define WIENER_WIN_REDUCED (WIENER_WIN - 2) |
| #define WIENER_WIN2_CHROMA ((WIENER_WIN_CHROMA) * (WIENER_WIN_CHROMA)) |
| #define WIENER_STATS_DOWNSAMPLE_FACTOR 4 |
| |
| #define WIENER_FILT_PREC_BITS 7 |
| #define WIENER_FILT_STEP (1 << WIENER_FILT_PREC_BITS) |
| |
| // Central values for the taps |
| #define WIENER_FILT_TAP0_MIDV (3) |
| #define WIENER_FILT_TAP1_MIDV (-7) |
| #define WIENER_FILT_TAP2_MIDV (15) |
| #define WIENER_FILT_TAP3_MIDV \ |
| (WIENER_FILT_STEP - 2 * (WIENER_FILT_TAP0_MIDV + WIENER_FILT_TAP1_MIDV + \ |
| WIENER_FILT_TAP2_MIDV)) |
| |
| #define WIENER_FILT_TAP0_BITS 4 |
| #define WIENER_FILT_TAP1_BITS 5 |
| #define WIENER_FILT_TAP2_BITS 6 |
| |
| #define WIENER_FILT_BITS \ |
| ((WIENER_FILT_TAP0_BITS + WIENER_FILT_TAP1_BITS + WIENER_FILT_TAP2_BITS) * 2) |
| |
| #define WIENER_FILT_TAP0_MINV \ |
| (WIENER_FILT_TAP0_MIDV - (1 << WIENER_FILT_TAP0_BITS) / 2) |
| #define WIENER_FILT_TAP1_MINV \ |
| (WIENER_FILT_TAP1_MIDV - (1 << WIENER_FILT_TAP1_BITS) / 2) |
| #define WIENER_FILT_TAP2_MINV \ |
| (WIENER_FILT_TAP2_MIDV - (1 << WIENER_FILT_TAP2_BITS) / 2) |
| |
| #define WIENER_FILT_TAP0_MAXV \ |
| (WIENER_FILT_TAP0_MIDV - 1 + (1 << WIENER_FILT_TAP0_BITS) / 2) |
| #define WIENER_FILT_TAP1_MAXV \ |
| (WIENER_FILT_TAP1_MIDV - 1 + (1 << WIENER_FILT_TAP1_BITS) / 2) |
| #define WIENER_FILT_TAP2_MAXV \ |
| (WIENER_FILT_TAP2_MIDV - 1 + (1 << WIENER_FILT_TAP2_BITS) / 2) |
| |
| #define WIENER_FILT_TAP0_SUBEXP_K 1 |
| #define WIENER_FILT_TAP1_SUBEXP_K 2 |
| #define WIENER_FILT_TAP2_SUBEXP_K 3 |
| |
| // Max of SGRPROJ_TMPBUF_SIZE, DOMAINTXFMRF_TMPBUF_SIZE, WIENER_TMPBUF_SIZE |
| #define RESTORATION_TMPBUF_SIZE (SGRPROJ_TMPBUF_SIZE) |
| |
| // Max of SGRPROJ_EXTBUF_SIZE, WIENER_EXTBUF_SIZE |
| #define RESTORATION_EXTBUF_SIZE (WIENER_EXTBUF_SIZE) |
| |
| // Check the assumptions of the existing code |
| #if SUBPEL_TAPS != WIENER_WIN + 1 |
| #error "Wiener filter currently only works if SUBPEL_TAPS == WIENER_WIN + 1" |
| #endif |
| #if WIENER_FILT_PREC_BITS != 7 |
| #error "Wiener filter currently only works if WIENER_FILT_PREC_BITS == 7" |
| #endif |
| |
| typedef struct { |
| int r[2]; // radii |
| int s[2]; // sgr parameters for r[0] and r[1], based on GenSgrprojVtable() |
| } sgr_params_type; |
| /*!\endcond */ |
| |
| /*!\brief Parameters related to Restoration Unit Info */ |
| typedef struct { |
| /*! |
| * restoration type |
| */ |
| RestorationType restoration_type; |
| |
| /*! |
| * Wiener filter parameters if restoration_type indicates Wiener |
| */ |
| WienerInfo wiener_info; |
| |
| /*! |
| * Sgrproj filter parameters if restoration_type indicates Sgrproj |
| */ |
| SgrprojInfo sgrproj_info; |
| } RestorationUnitInfo; |
| |
| /*!\cond */ |
| |
| // A restoration line buffer needs space for two lines plus a horizontal filter |
| // margin of RESTORATION_EXTRA_HORZ on each side. |
| #define RESTORATION_LINEBUFFER_WIDTH \ |
| (RESTORATION_UNITSIZE_MAX * 3 / 2 + 2 * RESTORATION_EXTRA_HORZ) |
| |
| typedef struct { |
| // Temporary buffers to save/restore 3 lines above/below the restoration |
| // stripe. |
| uint16_t tmp_save_above[RESTORATION_BORDER][RESTORATION_LINEBUFFER_WIDTH]; |
| uint16_t tmp_save_below[RESTORATION_BORDER][RESTORATION_LINEBUFFER_WIDTH]; |
| } RestorationLineBuffers; |
| /*!\endcond */ |
| |
| /*!\brief Parameters related to Restoration Stripe boundaries */ |
| typedef struct { |
| /*! |
| * stripe boundary above |
| */ |
| uint8_t *stripe_boundary_above; |
| |
| /*! |
| * stripe boundary below |
| */ |
| uint8_t *stripe_boundary_below; |
| |
| /*! |
| * strides for stripe boundaries above and below |
| */ |
| int stripe_boundary_stride; |
| |
| /*! |
| * size of stripe boundaries above and below |
| */ |
| int stripe_boundary_size; |
| } RestorationStripeBoundaries; |
| |
| /*!\brief Parameters related to Restoration Info */ |
| typedef struct { |
| /*! |
| * Restoration type for frame |
| */ |
| RestorationType frame_restoration_type; |
| |
| /*! |
| * Restoration unit size |
| */ |
| int restoration_unit_size; |
| |
| /** |
| * \name Fields allocated and initialised by av1_alloc_restoration_struct. |
| */ |
| /**@{*/ |
| /*! |
| * Total number of restoration units in this plane |
| */ |
| int num_rest_units; |
| |
| /*! |
| * Number of vertical restoration units in this plane |
| */ |
| int vert_units; |
| |
| /*! |
| * Number of horizontal restoration units in this plane |
| */ |
| int horz_units; |
| /**@}*/ |
| |
| /*! |
| * Parameters for each restoration unit in this plane |
| */ |
| RestorationUnitInfo *unit_info; |
| |
| /*! |
| * Restoration Stripe boundary info |
| */ |
| RestorationStripeBoundaries boundaries; |
| |
| /*! |
| * Whether optimized lr can be used for speed. |
| * That includes cases of no cdef and no superres, or if fast trial runs |
| * are used on the encoder side. |
| */ |
| int optimized_lr; |
| } RestorationInfo; |
| |
| /*!\cond */ |
| |
| static INLINE void set_default_sgrproj(SgrprojInfo *sgrproj_info) { |
| sgrproj_info->xqd[0] = (SGRPROJ_PRJ_MIN0 + SGRPROJ_PRJ_MAX0) / 2; |
| sgrproj_info->xqd[1] = (SGRPROJ_PRJ_MIN1 + SGRPROJ_PRJ_MAX1) / 2; |
| } |
| |
| static INLINE void set_default_wiener(WienerInfo *wiener_info) { |
| wiener_info->vfilter[0] = wiener_info->hfilter[0] = WIENER_FILT_TAP0_MIDV; |
| wiener_info->vfilter[1] = wiener_info->hfilter[1] = WIENER_FILT_TAP1_MIDV; |
| wiener_info->vfilter[2] = wiener_info->hfilter[2] = WIENER_FILT_TAP2_MIDV; |
| wiener_info->vfilter[WIENER_HALFWIN] = wiener_info->hfilter[WIENER_HALFWIN] = |
| -2 * |
| (WIENER_FILT_TAP2_MIDV + WIENER_FILT_TAP1_MIDV + WIENER_FILT_TAP0_MIDV); |
| wiener_info->vfilter[4] = wiener_info->hfilter[4] = WIENER_FILT_TAP2_MIDV; |
| wiener_info->vfilter[5] = wiener_info->hfilter[5] = WIENER_FILT_TAP1_MIDV; |
| wiener_info->vfilter[6] = wiener_info->hfilter[6] = WIENER_FILT_TAP0_MIDV; |
| } |
| |
| typedef struct { |
| int h_start, h_end, v_start, v_end; |
| } RestorationTileLimits; |
| |
| typedef void (*rest_unit_visitor_t)(const RestorationTileLimits *limits, |
| int rest_unit_idx, void *priv, |
| int32_t *tmpbuf, |
| RestorationLineBuffers *rlbs); |
| |
| typedef struct FilterFrameCtxt { |
| const RestorationInfo *rsi; |
| int ss_x, ss_y; |
| int plane_w, plane_h; |
| int highbd, bit_depth; |
| uint8_t *data8, *dst8; |
| int data_stride, dst_stride; |
| } FilterFrameCtxt; |
| |
| typedef struct AV1LrStruct { |
| rest_unit_visitor_t on_rest_unit; |
| FilterFrameCtxt ctxt[MAX_MB_PLANE]; |
| YV12_BUFFER_CONFIG *frame; |
| YV12_BUFFER_CONFIG *dst; |
| } AV1LrStruct; |
| |
| extern const sgr_params_type av1_sgr_params[SGRPROJ_PARAMS]; |
| extern int sgrproj_mtable[SGRPROJ_PARAMS][2]; |
| extern const int32_t av1_x_by_xplus1[256]; |
| extern const int32_t av1_one_by_x[MAX_NELEM]; |
| |
| void av1_alloc_restoration_struct(struct AV1Common *cm, RestorationInfo *rsi, |
| int is_uv); |
| void av1_free_restoration_struct(RestorationInfo *rst_info); |
| |
| void av1_extend_frame(uint8_t *data, int width, int height, int stride, |
| int border_horz, int border_vert, int highbd); |
| void av1_decode_xq(const int *xqd, int *xq, const sgr_params_type *params); |
| |
| /*!\endcond */ |
| |
| /*!\brief Function for applying loop restoration filter to a single unit. |
| * |
| * \ingroup in_loop_restoration |
| * This function applies the loop restoration filter to a single |
| * loop restoration unit. |
| * |
| * \param[in] limits Limits of the unit |
| * \param[in] rui The parameters to use for this unit and its |
| * coefficients |
| * \param[in] rsb Deblocked pixels to use for stripe boundaries |
| * \param[in] rlbs Space to use as a scratch buffer |
| * \param[in] ss_x Horizontal subsampling for plane |
| * \param[in] ss_y Vertical subsampling for plane |
| * \param[in] plane_w Width of the current plane |
| * \param[in] plane_h Height of the current plane |
| * \param[in] highbd Whether high bitdepth pipeline is used |
| * \param[in] bit_depth Bit-depth of the video |
| * \param[in] data8 Frame data (pointing at the top-left corner of |
| * the frame, not the restoration unit). |
| * \param[in] stride Stride of \c data8 |
| * \param[out] dst8 Buffer where the results will be written. Like |
| * \c data8, \c dst8 should point at the top-left |
| * corner of the frame |
| * \param[in] dst_stride Stride of \c dst8 |
| * \param[in] tmpbuf Scratch buffer used by the sgrproj filter which |
| * should be at least SGRPROJ_TMPBUF_SIZE big. |
| * \param[in] optimized_lr Whether to use fast optimized Loop Restoration |
| * |
| * \remark Nothing is returned. Instead, the filtered unit is output in |
| * \c dst8 at the proper restoration unit offset. |
| */ |
| void av1_loop_restoration_filter_unit(const RestorationTileLimits *limits, |
| const RestorationUnitInfo *rui, |
| const RestorationStripeBoundaries *rsb, |
| RestorationLineBuffers *rlbs, int plane_w, |
| int plane_h, int ss_x, int ss_y, |
| int highbd, int bit_depth, uint8_t *data8, |
| int stride, uint8_t *dst8, int dst_stride, |
| int32_t *tmpbuf, int optimized_lr); |
| |
| /*!\brief Function for applying loop restoration filter to a frame |
| * |
| * \ingroup in_loop_restoration |
| * This function applies the loop restoration filter to a frame. |
| * |
| * \param[in, out] frame Compressed frame buffer |
| * \param[in, out] cm Pointer to top level common structure |
| * \param[in] optimized_lr Whether to use fast optimized Loop Restoration |
| * \param[in] lr_ctxt Loop restoration context |
| * |
| * \remark Nothing is returned. Instead, the filtered frame is output in |
| * \c frame. |
| */ |
| void av1_loop_restoration_filter_frame(YV12_BUFFER_CONFIG *frame, |
| struct AV1Common *cm, int optimized_lr, |
| void *lr_ctxt); |
| /*!\cond */ |
| |
| void av1_loop_restoration_precal(); |
| |
| struct AV1LrSyncData; |
| |
| typedef void (*sync_read_fn_t)(void *const lr_sync, int r, int c, int plane); |
| |
| typedef void (*sync_write_fn_t)(void *const lr_sync, int r, int c, |
| const int sb_cols, int plane); |
| |
| // Call on_rest_unit for each loop restoration unit in the plane. |
| void av1_foreach_rest_unit_in_plane(const struct AV1Common *cm, int plane, |
| rest_unit_visitor_t on_rest_unit, |
| void *priv, int32_t *tmpbuf, |
| RestorationLineBuffers *rlbs); |
| |
| // Return 1 iff the block at mi_row, mi_col with size bsize is a |
| // top-level superblock containing the top-left corner of at least one |
| // loop restoration unit. |
| // |
| // If the block is a top-level superblock, the function writes to |
| // *rcol0, *rcol1, *rrow0, *rrow1. This means that the parameters for all |
| // restoration units in the rectangle [*rcol0, *rcol1) x [*rrow0, *rrow1) |
| // are signaled in this superblock. |
| int av1_loop_restoration_corners_in_sb(const struct AV1Common *cm, int plane, |
| int mi_row, int mi_col, BLOCK_SIZE bsize, |
| int *rcol0, int *rcol1, int *rrow0, |
| int *rrow1); |
| |
| void av1_loop_restoration_save_boundary_lines(const YV12_BUFFER_CONFIG *frame, |
| struct AV1Common *cm, |
| int after_cdef); |
| void av1_loop_restoration_filter_frame_init(AV1LrStruct *lr_ctxt, |
| YV12_BUFFER_CONFIG *frame, |
| struct AV1Common *cm, |
| int optimized_lr, int num_planes); |
| void av1_loop_restoration_copy_planes(AV1LrStruct *loop_rest_ctxt, |
| struct AV1Common *cm, int num_planes); |
| void av1_foreach_rest_unit_in_row( |
| RestorationTileLimits *limits, int plane_w, |
| rest_unit_visitor_t on_rest_unit, int row_number, int unit_size, |
| int hnum_rest_units, int vnum_rest_units, int plane, void *priv, |
| int32_t *tmpbuf, RestorationLineBuffers *rlbs, sync_read_fn_t on_sync_read, |
| sync_write_fn_t on_sync_write, struct AV1LrSyncData *const lr_sync, |
| struct aom_internal_error_info *error_info); |
| |
| void av1_get_upsampled_plane_size(const struct AV1Common *cm, int is_uv, |
| int *plane_w, int *plane_h); |
| int av1_lr_count_units(int unit_size, int plane_size); |
| void av1_lr_sync_read_dummy(void *const lr_sync, int r, int c, int plane); |
| void av1_lr_sync_write_dummy(void *const lr_sync, int r, int c, |
| const int sb_cols, int plane); |
| |
| /*!\endcond */ |
| |
| #ifdef __cplusplus |
| } // extern "C" |
| #endif |
| |
| #endif // AOM_AV1_COMMON_RESTORATION_H_ |