| /* |
| * Copyright (c) 2016, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 2 Clause License and |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License |
| * was not distributed with this source code in the LICENSE file, you can |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open |
| * Media Patent License 1.0 was not distributed with this source code in the |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. |
| */ |
| |
| #include "config/aom_config.h" |
| |
| #include "third_party/googletest/src/googletest/include/gtest/gtest.h" |
| #include "test/codec_factory.h" |
| #include "test/datarate_test.h" |
| #include "test/encode_test_driver.h" |
| #include "test/i420_video_source.h" |
| #include "test/util.h" |
| #include "test/y4m_video_source.h" |
| #include "aom/aom_codec.h" |
| |
| namespace datarate_test { |
| namespace { |
| |
| // Params: test mode, speed, aq mode and index for bitrate array. |
| class DatarateTestLarge |
| : public ::libaom_test::CodecTestWith4Params<libaom_test::TestMode, int, |
| unsigned int, int>, |
| public DatarateTest { |
| public: |
| DatarateTestLarge() : DatarateTest(GET_PARAM(0)) { |
| set_cpu_used_ = GET_PARAM(2); |
| aq_mode_ = GET_PARAM(3); |
| } |
| |
| protected: |
| virtual ~DatarateTestLarge() {} |
| |
| virtual void SetUp() { |
| InitializeConfig(GET_PARAM(1)); |
| ResetModel(); |
| } |
| |
| virtual void BasicRateTargetingVBRTest() { |
| cfg_.rc_min_quantizer = 0; |
| cfg_.rc_max_quantizer = 63; |
| cfg_.g_error_resilient = 0; |
| cfg_.rc_end_usage = AOM_VBR; |
| cfg_.g_lag_in_frames = 0; |
| |
| ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, |
| 288, 30, 1, 0, 140); |
| const int bitrate_array[2] = { 400, 800 }; |
| cfg_.rc_target_bitrate = bitrate_array[GET_PARAM(4)]; |
| ResetModel(); |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| ASSERT_GE(effective_datarate_, cfg_.rc_target_bitrate * 0.7) |
| << " The datarate for the file is lower than target by too much!"; |
| // FIXME(jingning): Lower this test threshold after vbr mode can render |
| // sufficiently accurate bit rate. |
| ASSERT_LE(effective_datarate_, cfg_.rc_target_bitrate * 1.45) |
| << " The datarate for the file is greater than target by too much!"; |
| } |
| |
| virtual void BasicRateTargetingCBRTest() { |
| cfg_.rc_buf_initial_sz = 500; |
| cfg_.rc_buf_optimal_sz = 500; |
| cfg_.rc_buf_sz = 1000; |
| cfg_.rc_dropframe_thresh = 1; |
| cfg_.rc_min_quantizer = 0; |
| cfg_.rc_max_quantizer = 63; |
| cfg_.rc_end_usage = AOM_CBR; |
| cfg_.g_lag_in_frames = 0; |
| |
| ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, |
| 288, 30, 1, 0, 140); |
| const int bitrate_array[2] = { 150, 550 }; |
| cfg_.rc_target_bitrate = bitrate_array[GET_PARAM(4)]; |
| ResetModel(); |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| ASSERT_GE(effective_datarate_, cfg_.rc_target_bitrate * 0.85) |
| << " The datarate for the file is lower than target by too much!"; |
| ASSERT_LE(effective_datarate_, cfg_.rc_target_bitrate * 1.19) |
| << " The datarate for the file is greater than target by too much!"; |
| } |
| |
| virtual void BasicRateTargetingCBRSpikeTest() { |
| cfg_.rc_buf_initial_sz = 500; |
| cfg_.rc_buf_optimal_sz = 500; |
| cfg_.rc_buf_sz = 1000; |
| cfg_.rc_dropframe_thresh = 0; |
| cfg_.rc_min_quantizer = 2; |
| cfg_.rc_max_quantizer = 56; |
| cfg_.rc_end_usage = AOM_CBR; |
| cfg_.g_lag_in_frames = 0; |
| cfg_.kf_max_dist = 3000; |
| cfg_.kf_min_dist = 3000; |
| |
| ::libaom_test::I420VideoSource video("desktopqvga2.320_240.yuv", 320, 240, |
| 30, 1, 0, 800); |
| const int bitrate_array[2] = { 100, 200 }; |
| cfg_.rc_target_bitrate = bitrate_array[GET_PARAM(4)]; |
| ResetModel(); |
| max_perc_spike_ = 3.0; |
| max_perc_spike_high_ = 8.0; |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| ASSERT_GE(effective_datarate_, cfg_.rc_target_bitrate * 0.85) |
| << " The datarate for the file is lower than target by too much!"; |
| ASSERT_LE(effective_datarate_, cfg_.rc_target_bitrate * 1.19) |
| << " The datarate for the file is greater than target by too much!"; |
| ASSERT_LT(num_spikes_, 8); |
| ASSERT_LT(num_spikes_high_, 1); |
| } |
| |
| virtual void BasicRateTargetingCBRDynamicBitrateTest() { |
| cfg_.rc_buf_initial_sz = 500; |
| cfg_.rc_buf_optimal_sz = 500; |
| cfg_.rc_buf_sz = 1000; |
| cfg_.rc_dropframe_thresh = 0; |
| cfg_.rc_min_quantizer = 2; |
| cfg_.rc_max_quantizer = 56; |
| cfg_.rc_end_usage = AOM_CBR; |
| cfg_.g_lag_in_frames = 0; |
| cfg_.kf_max_dist = 3000; |
| cfg_.kf_min_dist = 3000; |
| |
| ::libaom_test::I420VideoSource video("desktop1.320_180.yuv", 320, 180, 30, |
| 1, 0, 800); |
| const int bitrate_array[2] = { 100, 200 }; |
| cfg_.rc_target_bitrate = bitrate_array[GET_PARAM(4)]; |
| ResetModel(); |
| target_bitrate_update_[0] = cfg_.rc_target_bitrate; |
| target_bitrate_update_[1] = static_cast<int>(1.3 * cfg_.rc_target_bitrate); |
| target_bitrate_update_[2] = static_cast<int>(0.7 * cfg_.rc_target_bitrate); |
| frame_update_bitrate_ = 250; |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| for (int i = 0; i < 3; i++) { |
| ASSERT_GE(effective_datarate_dynamic_[i], |
| target_bitrate_update_[i] * 0.85) |
| << " The datarate for the file is lower than target by too much!"; |
| ASSERT_LE(effective_datarate_dynamic_[i], |
| target_bitrate_update_[i] * 1.20) |
| << " The datarate for the file is greater than target by too much!"; |
| } |
| } |
| |
| virtual void BasicRateTargetingMultiThreadCBRTest() { |
| ::libaom_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, |
| 1, 0, 400); |
| cfg_.rc_buf_initial_sz = 500; |
| cfg_.rc_buf_optimal_sz = 500; |
| cfg_.rc_buf_sz = 1000; |
| cfg_.rc_dropframe_thresh = 1; |
| cfg_.rc_min_quantizer = 0; |
| cfg_.rc_max_quantizer = 63; |
| cfg_.rc_end_usage = AOM_CBR; |
| cfg_.g_lag_in_frames = 0; |
| cfg_.g_threads = 4; |
| |
| const int bitrate_array[2] = { 250, 650 }; |
| cfg_.rc_target_bitrate = bitrate_array[GET_PARAM(4)]; |
| ResetModel(); |
| tile_column_ = 2; |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| ASSERT_GE(static_cast<double>(cfg_.rc_target_bitrate), |
| effective_datarate_ * 0.85) |
| << " The datarate for the file exceeds the target by too much!"; |
| ASSERT_LE(static_cast<double>(cfg_.rc_target_bitrate), |
| effective_datarate_ * 1.15) |
| << " The datarate for the file missed the target!" |
| << cfg_.rc_target_bitrate << " " << effective_datarate_; |
| } |
| |
| virtual void ErrorResilienceOnSceneCuts() { |
| if (GET_PARAM(4) > 0) return; |
| cfg_.rc_buf_initial_sz = 500; |
| cfg_.rc_buf_optimal_sz = 500; |
| cfg_.rc_buf_sz = 1000; |
| cfg_.rc_dropframe_thresh = 0; |
| cfg_.g_error_resilient = 1; |
| cfg_.rc_min_quantizer = 0; |
| cfg_.rc_max_quantizer = 63; |
| cfg_.rc_end_usage = AOM_CBR; |
| cfg_.g_lag_in_frames = 0; |
| |
| ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, |
| 288, 30, 1, 0, 300); |
| cfg_.rc_target_bitrate = 500; |
| ResetModel(); |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| ASSERT_GE(effective_datarate_, cfg_.rc_target_bitrate * 0.85) |
| << " The datarate for the file is lower than target by too much!"; |
| ASSERT_LE(effective_datarate_, cfg_.rc_target_bitrate * 1.15) |
| << " The datarate for the file is greater than target by too much!"; |
| } |
| |
| virtual void BasicRateTargetingCBRPeriodicKeyFrameTest() { |
| cfg_.rc_buf_initial_sz = 500; |
| cfg_.rc_buf_optimal_sz = 500; |
| cfg_.rc_buf_sz = 1000; |
| cfg_.rc_dropframe_thresh = 1; |
| cfg_.rc_min_quantizer = 0; |
| cfg_.rc_max_quantizer = 63; |
| cfg_.rc_end_usage = AOM_CBR; |
| cfg_.g_lag_in_frames = 0; |
| // Periodic keyframe |
| cfg_.kf_max_dist = 50; |
| |
| ::libaom_test::I420VideoSource video("pixel_capture_w320h240.yuv", 320, 240, |
| 30, 1, 0, 310); |
| const int bitrate_array[2] = { 150, 550 }; |
| cfg_.rc_target_bitrate = bitrate_array[GET_PARAM(4)]; |
| ResetModel(); |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| ASSERT_GE(effective_datarate_, cfg_.rc_target_bitrate * 0.85) |
| << " The datarate for the file is lower than target by too much!"; |
| ASSERT_LE(effective_datarate_, cfg_.rc_target_bitrate * 1.15) |
| << " The datarate for the file is greater than target by too much!"; |
| } |
| |
| virtual void CBRPeriodicKeyFrameOnSceneCuts() { |
| if (GET_PARAM(4) > 0) return; |
| cfg_.rc_buf_initial_sz = 500; |
| cfg_.rc_buf_optimal_sz = 500; |
| cfg_.rc_buf_sz = 1000; |
| cfg_.rc_dropframe_thresh = 0; |
| cfg_.rc_min_quantizer = 0; |
| cfg_.rc_max_quantizer = 63; |
| cfg_.rc_end_usage = AOM_CBR; |
| cfg_.g_lag_in_frames = 0; |
| // Periodic keyframe |
| cfg_.kf_max_dist = 30; |
| cfg_.kf_min_dist = 30; |
| |
| ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, |
| 288, 30, 1, 0, 300); |
| cfg_.rc_target_bitrate = 500; |
| ResetModel(); |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| ASSERT_GE(effective_datarate_, cfg_.rc_target_bitrate * 0.85) |
| << " The datarate for the file is lower than target by too much!"; |
| ASSERT_LE(effective_datarate_, cfg_.rc_target_bitrate * 1.3) |
| << " The datarate for the file is greater than target by too much!"; |
| } |
| |
| virtual void BasicRateTargetingAQModeOnOffCBRTest() { |
| if (GET_PARAM(4) > 0) return; |
| cfg_.rc_buf_initial_sz = 500; |
| cfg_.rc_buf_optimal_sz = 500; |
| cfg_.rc_buf_sz = 1000; |
| cfg_.rc_dropframe_thresh = 0; |
| cfg_.rc_min_quantizer = 2; |
| cfg_.rc_max_quantizer = 63; |
| cfg_.rc_end_usage = AOM_CBR; |
| cfg_.g_lag_in_frames = 0; |
| cfg_.g_error_resilient = 0; |
| cfg_.g_pass = AOM_RC_ONE_PASS; |
| cfg_.g_usage = AOM_USAGE_REALTIME; |
| cfg_.kf_mode = AOM_KF_DISABLED; |
| |
| ::libaom_test::I420VideoSource video("pixel_capture_w320h240.yuv", 320, 240, |
| 30, 1, 0, 310); |
| cfg_.rc_target_bitrate = 60; |
| ResetModel(); |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| ASSERT_GE(effective_datarate_, cfg_.rc_target_bitrate * 0.85) |
| << " The datarate for the file is lower than target by too much!"; |
| ASSERT_LE(effective_datarate_, cfg_.rc_target_bitrate * 1.15) |
| << " The datarate for the file is greater than target by too much!"; |
| } |
| |
| virtual void BasicRateTargeting444CBRScreenTest() { |
| ::libaom_test::Y4mVideoSource video("rush_hour_444.y4m", 0, 140); |
| |
| cfg_.g_profile = 1; |
| cfg_.g_timebase = video.timebase(); |
| |
| cfg_.rc_buf_initial_sz = 500; |
| cfg_.rc_buf_optimal_sz = 500; |
| cfg_.rc_buf_sz = 1000; |
| cfg_.rc_dropframe_thresh = 1; |
| cfg_.rc_min_quantizer = 0; |
| cfg_.rc_max_quantizer = 63; |
| cfg_.rc_end_usage = AOM_CBR; |
| |
| const int bitrate_array[2] = { 250, 650 }; |
| cfg_.rc_target_bitrate = bitrate_array[GET_PARAM(4)]; |
| ResetModel(); |
| screen_mode_ = true; |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| ASSERT_GE(static_cast<double>(cfg_.rc_target_bitrate), |
| effective_datarate_ * 0.85) |
| << " The datarate for the file exceeds the target by too much!"; |
| ASSERT_LE(static_cast<double>(cfg_.rc_target_bitrate), |
| effective_datarate_ * 1.15) |
| << " The datarate for the file missed the target!" |
| << cfg_.rc_target_bitrate << " " << effective_datarate_; |
| } |
| }; |
| |
| // Params: test mode, speed, aq mode. |
| class DatarateTestFrameDropLarge |
| : public ::libaom_test::CodecTestWith3Params<libaom_test::TestMode, int, |
| unsigned int>, |
| public DatarateTest { |
| public: |
| DatarateTestFrameDropLarge() : DatarateTest(GET_PARAM(0)) { |
| set_cpu_used_ = GET_PARAM(2); |
| aq_mode_ = GET_PARAM(3); |
| } |
| |
| protected: |
| virtual ~DatarateTestFrameDropLarge() {} |
| |
| virtual void SetUp() { |
| InitializeConfig(GET_PARAM(1)); |
| ResetModel(); |
| } |
| |
| virtual void ChangingDropFrameThreshTest() { |
| cfg_.rc_buf_initial_sz = 500; |
| cfg_.rc_buf_optimal_sz = 500; |
| cfg_.rc_buf_sz = 1000; |
| cfg_.rc_undershoot_pct = 20; |
| cfg_.rc_undershoot_pct = 20; |
| cfg_.rc_dropframe_thresh = 10; |
| cfg_.rc_min_quantizer = 0; |
| cfg_.rc_max_quantizer = 50; |
| cfg_.rc_end_usage = AOM_CBR; |
| cfg_.rc_target_bitrate = 200; |
| cfg_.g_lag_in_frames = 0; |
| cfg_.g_error_resilient = 1; |
| // TODO(marpan): Investigate datarate target failures with a smaller |
| // keyframe interval (128). |
| cfg_.kf_max_dist = 9999; |
| |
| ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, |
| 288, 30, 1, 0, 100); |
| |
| const int kDropFrameThreshTestStep = 30; |
| aom_codec_pts_t last_drop = 140; |
| int last_num_drops = 0; |
| for (int i = 40; i < 100; i += kDropFrameThreshTestStep) { |
| cfg_.rc_dropframe_thresh = i; |
| ResetModel(); |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| ASSERT_GE(effective_datarate_, cfg_.rc_target_bitrate * 0.85) |
| << " The datarate for the file is lower than target by too much!"; |
| ASSERT_LE(effective_datarate_, cfg_.rc_target_bitrate * 1.31) |
| << " The datarate for the file is greater than target by too much!"; |
| if (last_drop > 0) { |
| ASSERT_LE(first_drop_, last_drop) |
| << " The first dropped frame for drop_thresh " << i |
| << " > first dropped frame for drop_thresh " |
| << i - kDropFrameThreshTestStep; |
| } |
| ASSERT_GE(num_drops_, last_num_drops * 0.7) |
| << " The number of dropped frames for drop_thresh " << i |
| << " < number of dropped frames for drop_thresh " |
| << i - kDropFrameThreshTestStep; |
| last_drop = first_drop_; |
| last_num_drops = num_drops_; |
| } |
| } |
| }; |
| |
| // Check basic rate targeting for VBR mode. |
| TEST_P(DatarateTestLarge, BasicRateTargetingVBR) { |
| BasicRateTargetingVBRTest(); |
| } |
| |
| // Check basic rate targeting for CBR. |
| TEST_P(DatarateTestLarge, BasicRateTargetingCBR) { |
| BasicRateTargetingCBRTest(); |
| } |
| |
| // Check basic rate targeting for CBR, with 4 threads |
| TEST_P(DatarateTestLarge, BasicRateTargetingMultiThreadCBR) { |
| BasicRateTargetingMultiThreadCBRTest(); |
| } |
| |
| // Check basic rate targeting for periodic key frame. |
| TEST_P(DatarateTestLarge, PeriodicKeyFrameCBR) { |
| BasicRateTargetingCBRPeriodicKeyFrameTest(); |
| } |
| |
| // Check basic rate targeting for periodic key frame, aligned with scene change. |
| TEST_P(DatarateTestLarge, PeriodicKeyFrameCBROnSceneCuts) { |
| CBRPeriodicKeyFrameOnSceneCuts(); |
| } |
| |
| // Check basic rate targeting with error resilience on for scene cuts. |
| TEST_P(DatarateTestLarge, ErrorResilienceOnSceneCuts) { |
| ErrorResilienceOnSceneCuts(); |
| } |
| |
| // Check basic rate targeting for CBR, for 444 input screen mode. |
| TEST_P(DatarateTestLarge, BasicRateTargeting444CBRScreen) { |
| BasicRateTargeting444CBRScreenTest(); |
| } |
| |
| // Check that (1) the first dropped frame gets earlier and earlier |
| // as the drop frame threshold is increased, and (2) that the total number of |
| // frame drops does not decrease as we increase frame drop threshold. |
| // Use a lower qp-max to force some frame drops. |
| TEST_P(DatarateTestFrameDropLarge, ChangingDropFrameThresh) { |
| ChangingDropFrameThreshTest(); |
| } |
| |
| TEST_P(DatarateTestLarge, BasicRateTargetingAQModeOnOffCBR) { |
| BasicRateTargetingAQModeOnOffCBRTest(); |
| } |
| |
| class DatarateTestRealtime : public DatarateTestLarge {}; |
| |
| class DatarateTestFrameDropRealtime : public DatarateTestFrameDropLarge {}; |
| |
| // Params: aq mode. |
| class DatarateTestSpeedChangeRealtime |
| : public ::libaom_test::CodecTestWith2Params<libaom_test::TestMode, |
| unsigned int>, |
| public DatarateTest { |
| public: |
| DatarateTestSpeedChangeRealtime() : DatarateTest(GET_PARAM(0)) { |
| aq_mode_ = GET_PARAM(1); |
| speed_change_test_ = true; |
| } |
| |
| protected: |
| virtual ~DatarateTestSpeedChangeRealtime() {} |
| |
| virtual void SetUp() { |
| InitializeConfig(GET_PARAM(1)); |
| ResetModel(); |
| } |
| |
| virtual void ChangingSpeedTest() { |
| cfg_.rc_buf_initial_sz = 500; |
| cfg_.rc_buf_optimal_sz = 500; |
| cfg_.rc_buf_sz = 1000; |
| cfg_.rc_undershoot_pct = 20; |
| cfg_.rc_undershoot_pct = 20; |
| cfg_.rc_dropframe_thresh = 10; |
| cfg_.rc_min_quantizer = 0; |
| cfg_.rc_max_quantizer = 50; |
| cfg_.rc_end_usage = AOM_CBR; |
| cfg_.rc_target_bitrate = 200; |
| cfg_.g_lag_in_frames = 0; |
| cfg_.g_error_resilient = 1; |
| // TODO(marpan): Investigate datarate target failures with a smaller |
| // keyframe interval (128). |
| cfg_.kf_max_dist = 9999; |
| cfg_.rc_dropframe_thresh = 0; |
| ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, |
| 288, 30, 1, 0, 100); |
| |
| ResetModel(); |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| ASSERT_GE(effective_datarate_, cfg_.rc_target_bitrate * 0.83) |
| << " The datarate for the file is lower than target by too much!"; |
| ASSERT_LE(effective_datarate_, cfg_.rc_target_bitrate * 1.35) |
| << " The datarate for the file is greater than target by too much!"; |
| } |
| }; |
| |
| // Check basic rate targeting for VBR mode. |
| TEST_P(DatarateTestRealtime, BasicRateTargetingVBR) { |
| BasicRateTargetingVBRTest(); |
| } |
| |
| // Check basic rate targeting for CBR. |
| TEST_P(DatarateTestRealtime, BasicRateTargetingCBR) { |
| BasicRateTargetingCBRTest(); |
| } |
| |
| // Check basic rate targeting for CBR. Use a longer clip, |
| // and verify #encode size spikes above threshold. |
| TEST_P(DatarateTestRealtime, BasicRateTargetingCBRSpike) { |
| BasicRateTargetingCBRSpikeTest(); |
| } |
| |
| // Check basic rate targeting for CBR. Use a longer clip, |
| // and verify encoder can respnd and hit new bitrates updated |
| // within the stream. |
| TEST_P(DatarateTestRealtime, BasicRateTargetingCBRDynamicBitrate) { |
| BasicRateTargetingCBRDynamicBitrateTest(); |
| } |
| |
| // Check basic rate targeting for CBR, with 4 threads |
| TEST_P(DatarateTestRealtime, BasicRateTargetingMultiThreadCBR) { |
| BasicRateTargetingMultiThreadCBRTest(); |
| } |
| |
| // Check basic rate targeting for periodic key frame. |
| TEST_P(DatarateTestRealtime, PeriodicKeyFrameCBR) { |
| BasicRateTargetingCBRPeriodicKeyFrameTest(); |
| } |
| |
| // Check basic rate targeting for periodic key frame, aligned with scene change. |
| TEST_P(DatarateTestRealtime, PeriodicKeyFrameCBROnSceneCuts) { |
| CBRPeriodicKeyFrameOnSceneCuts(); |
| } |
| |
| // Check basic rate targeting with error resilience on for scene cuts. |
| TEST_P(DatarateTestRealtime, ErrorResilienceOnSceneCuts) { |
| ErrorResilienceOnSceneCuts(); |
| } |
| |
| // Check basic rate targeting for CBR for 444 screen mode. |
| TEST_P(DatarateTestRealtime, BasicRateTargeting444CBRScreen) { |
| BasicRateTargeting444CBRScreenTest(); |
| } |
| |
| // Check that (1) the first dropped frame gets earlier and earlier |
| // as the drop frame threshold is increased, and (2) that the total number of |
| // frame drops does not decrease as we increase frame drop threshold. |
| // Use a lower qp-max to force some frame drops. |
| TEST_P(DatarateTestFrameDropRealtime, ChangingDropFrameThresh) { |
| ChangingDropFrameThreshTest(); |
| } |
| |
| TEST_P(DatarateTestSpeedChangeRealtime, ChangingSpeedTest) { |
| ChangingSpeedTest(); |
| } |
| |
| AV1_INSTANTIATE_TEST_SUITE(DatarateTestLarge, |
| ::testing::Values(::libaom_test::kRealTime), |
| ::testing::Range(5, 7), ::testing::Values(0, 3), |
| ::testing::Values(0, 1)); |
| |
| AV1_INSTANTIATE_TEST_SUITE(DatarateTestFrameDropLarge, |
| ::testing::Values(::libaom_test::kRealTime), |
| ::testing::Range(5, 7), ::testing::Values(0, 3)); |
| |
| AV1_INSTANTIATE_TEST_SUITE(DatarateTestRealtime, |
| ::testing::Values(::libaom_test::kRealTime), |
| ::testing::Range(7, 11), ::testing::Values(0, 3), |
| ::testing::Values(0, 1)); |
| |
| AV1_INSTANTIATE_TEST_SUITE(DatarateTestFrameDropRealtime, |
| ::testing::Values(::libaom_test::kRealTime), |
| ::testing::Range(7, 11), ::testing::Values(0, 3)); |
| |
| AV1_INSTANTIATE_TEST_SUITE(DatarateTestSpeedChangeRealtime, |
| ::testing::Values(::libaom_test::kRealTime), |
| ::testing::Values(0, 3)); |
| |
| } // namespace |
| } // namespace datarate_test |