| /* |
| * Copyright (c) 2016, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 2 Clause License and |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License |
| * was not distributed with this source code in the LICENSE file, you can |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open |
| * Media Patent License 1.0 was not distributed with this source code in the |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. |
| */ |
| |
| #ifndef AOM_AV1_ENCODER_AQ_CYCLICREFRESH_H_ |
| #define AOM_AV1_ENCODER_AQ_CYCLICREFRESH_H_ |
| |
| #include "av1/common/blockd.h" |
| #include "av1/encoder/block.h" |
| #include "av1/encoder/tokenize.h" |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| // The segment ids used in cyclic refresh: from base (no boost) to increasing |
| // boost (higher delta-qp). |
| #define CR_SEGMENT_ID_BASE 0 |
| #define CR_SEGMENT_ID_BOOST1 1 |
| #define CR_SEGMENT_ID_BOOST2 2 |
| |
| // Maximum rate target ratio for setting segment delta-qp. |
| #define CR_MAX_RATE_TARGET_RATIO 4.0 |
| |
| /*! |
| * \brief The stucture of CYCLIC_REFRESH. |
| * \ingroup cyclic_refresh |
| */ |
| struct CYCLIC_REFRESH { |
| /*! |
| * Percentage of blocks per frame that are targeted as candidates |
| * for cyclic refresh. |
| */ |
| int percent_refresh; |
| /*! |
| * Maximum q-delta as percentage of base q. |
| */ |
| int max_qdelta_perc; |
| /*! |
| *Superblock starting index for cycling through the frame. |
| */ |
| int sb_index; |
| /*! |
| * Controls how long block will need to wait to be refreshed again, in |
| * excess of the cycle time, i.e., in the case of all zero motion, block |
| * will be refreshed every (100/percent_refresh + time_for_refresh) frames. |
| */ |
| int time_for_refresh; |
| /*! |
| * Target number of (4x4) blocks that are set for delta-q. |
| */ |
| int target_num_seg_blocks; |
| /*! |
| * Actual number of (4x4) blocks that were applied delta-q, |
| * for segment 1. |
| */ |
| int actual_num_seg1_blocks; |
| /*! |
| * Actual number of (4x4) blocks that were applied delta-q, |
| * for segment 2. |
| */ |
| int actual_num_seg2_blocks; |
| /*! |
| * RD mult. parameters for segment 1. |
| */ |
| int rdmult; |
| /*! |
| * Count of zero motion vectors |
| */ |
| int cnt_zeromv; |
| /*! |
| * Cyclic refresh map. |
| */ |
| int8_t *map; |
| /*! |
| * Map of the last q a block was coded at. |
| */ |
| uint8_t *last_coded_q_map; |
| /*! |
| * Threshold applied to the projected rate of the coding block, |
| * when deciding whether block should be refreshed. |
| */ |
| int64_t thresh_rate_sb; |
| /*! |
| * Threshold applied to the projected distortion of the coding block, |
| * when deciding whether block should be refreshed. |
| */ |
| int64_t thresh_dist_sb; |
| /*! |
| * Threshold applied to the motion vector (in units of 1/8 pel) of the |
| * coding block, when deciding whether block should be refreshed. |
| */ |
| int16_t motion_thresh; |
| /*! |
| * Rate target ratio to set q delta. |
| */ |
| double rate_ratio_qdelta; |
| /*! |
| * Boost factor for rate target ratio, for segment CR_SEGMENT_ID_BOOST2. |
| */ |
| int rate_boost_fac; |
| |
| /*!\cond */ |
| int qindex_delta[3]; |
| double weight_segment; |
| int apply_cyclic_refresh; |
| /*!\endcond */ |
| }; |
| |
| struct AV1_COMP; |
| |
| typedef struct CYCLIC_REFRESH CYCLIC_REFRESH; |
| |
| CYCLIC_REFRESH *av1_cyclic_refresh_alloc(int mi_rows, int mi_cols); |
| |
| void av1_cyclic_refresh_free(CYCLIC_REFRESH *cr); |
| |
| /*!\brief Estimate the bits, incorporating the delta-q from the segments. |
| * |
| * For the just encoded frame, estimate the bits, incorporating the delta-q |
| * from non-base segment(s). Note this function is called in the postencode |
| * (called from rc_update_rate_correction_factors()). |
| * |
| * \ingroup cyclic_refresh |
| * \callgraph |
| * \callergraph |
| * |
| * \param[in] cpi Top level encoder structure |
| * \param[in] correction_factor rate correction factor |
| * |
| * \return Return the estimated bits at given q. |
| */ |
| int av1_cyclic_refresh_estimate_bits_at_q(const struct AV1_COMP *cpi, |
| double correction_factor); |
| |
| /*!\brief Estimate the bits per mb, for given q = i and delta-q. |
| * |
| * Prior to encoding the frame, estimate the bits per mb, for a given q = i and |
| * a corresponding delta-q (for segment 1). This function is called in the |
| * rc_regulate_q() to set the base qp index. Note: the segment map is set to |
| * either 0/CR_SEGMENT_ID_BASE (no refresh) or to 1/CR_SEGMENT_ID_BOOST1 |
| * (refresh) for each superblock, prior to encoding. |
| * |
| * \ingroup cyclic_refresh |
| * \callgraph |
| * \callergraph |
| * |
| * \param[in] cpi Top level encoder structure |
| * \param[in] i q index |
| * \param[in] correction_factor rate correction factor |
| * |
| * \return Return the estimated bits for q = i and delta-q (segment 1). |
| */ |
| int av1_cyclic_refresh_rc_bits_per_mb(const struct AV1_COMP *cpi, int i, |
| double correction_factor); |
| |
| /*!\brief Update segment_id for block based on mode selected. |
| * |
| * Prior to coding a given prediction block, of size bsize at (mi_row, mi_col), |
| * check if we should reset the segment_id (based on mode/motion/skip selected |
| * for that block) and update the cyclic_refresh map and segmentation map. |
| * |
| * \ingroup cyclic_refresh |
| * \callgraph |
| * \callergraph |
| * |
| * \param[in] cpi Top level encoder structure |
| * \param[in] x Pointer to MACROBLOCK structure |
| * \param[in] mi_row Row coordinate of the block in a step size of MI_SIZE |
| * \param[in] mi_col Col coordinate of the block in a step size of MI_SIZE |
| * \param[in] bsize Block size |
| * \param[in] rate Projected block rate from pickmode |
| * \param[in] dist Projected block dist from pickmode |
| * \param[in] skip Skip flag set from picmode |
| * \param[in] dry_run A code indicating whether it is part of the final |
| * pass for reconstructing the superblock |
| * |
| * \return Update the \c mbmi->segment_id, the \c cpi->cyclic_refresh and |
| * the \c cm->cpi->enc_seg.map. |
| */ |
| void av1_cyclic_refresh_update_segment(const struct AV1_COMP *cpi, |
| MACROBLOCK *const x, int mi_row, |
| int mi_col, BLOCK_SIZE bsize, |
| int64_t rate, int64_t dist, int skip, |
| RUN_TYPE dry_run); |
| |
| /*!\brief Initialize counters used for cyclic refresh. |
| * |
| * Initializes cyclic refresh counters cnt_zeromv, actual_num_seg1_blocks and |
| * actual_num_seg2_blocks. |
| * |
| * \ingroup cyclic_refresh |
| * \callgraph |
| * \callergraph |
| * |
| * \param[in] x Pointer to MACROBLOCK structure |
| * |
| * \return Update the \c x->cnt_zeromv, the \c x->actual_num_seg1_blocks and |
| * the \c x->actual_num_seg1_blocks. |
| */ |
| void av1_init_cyclic_refresh_counters(MACROBLOCK *const x); |
| |
| /*!\brief Accumulate cyclic refresh counters. |
| * |
| * Accumulates cyclic refresh counters cnt_zeromv, actual_num_seg1_blocks and |
| * actual_num_seg2_blocks from MACROBLOCK strcture to CYCLIC_REFRESH strcture. |
| * |
| * \ingroup cyclic_refresh |
| * \callgraph |
| * \callergraph |
| * |
| * \param[in] cyclic_refresh Pointer to CYCLIC_REFRESH structure |
| * \param[in] x Pointer to MACROBLOCK structure |
| * |
| * \return Update the \c cyclic_refresh->cnt_zeromv, the \c |
| * cyclic_refresh->actual_num_seg1_blocks and the \c |
| * cyclic_refresh->actual_num_seg1_blocks. |
| */ |
| void av1_accumulate_cyclic_refresh_counters( |
| CYCLIC_REFRESH *const cyclic_refresh, const MACROBLOCK *const x); |
| |
| /*!\brief Update stats after encoding frame. |
| * |
| * Update the number of block encoded with segment 1 and 2, |
| * and update the number of blocks encoded with small/zero motion. |
| * |
| * \ingroup cyclic_refresh |
| * \callgraph |
| * \callergraph |
| * |
| * \param[in] cpi Top level encoder structure |
| * |
| * \return Updates the \c cpi->cyclic_refresh with the new stats. |
| */ |
| void av1_cyclic_refresh_postencode(struct AV1_COMP *const cpi); |
| |
| /*!\brief Set golden frame update interval nased on cyclic refresh. |
| * |
| * \ingroup cyclic_refresh |
| * \callgraph |
| * \callergraph |
| * |
| * \param[in] cpi Top level encoder structure |
| * |
| * \return Returns the interval in \c cpi->rc.baseline_gf_interval. |
| */ |
| void av1_cyclic_refresh_set_golden_update(struct AV1_COMP *const cpi); |
| |
| /*!\brief Set the global/frame level parameters for cyclic refresh. |
| * |
| * First call to the cyclic refresh, before encoding the frame. |
| * Sets the flag on whether cyclic refresh should be applied, sets |
| * the amount/percent of refresh, and the amount of boost applied to |
| * the two segments (set by rate_ratio_qdelta and rate_boost_fac). |
| * |
| * \ingroup cyclic_refresh |
| * \callgraph |
| * \callergraph |
| * |
| * \param[in] cpi Top level encoder structure |
| * |
| * \return Updates the \c cpi->cyclic_refresh with the settings. |
| */ |
| void av1_cyclic_refresh_update_parameters(struct AV1_COMP *const cpi); |
| |
| /*!\brief Setup the cyclic background refresh. |
| * |
| * Set the delta q for the segment(s), and set the segmentation map. |
| * |
| * \ingroup cyclic_refresh |
| * \callgraph |
| * \callergraph |
| * |
| * \param[in] cpi Top level encoder structure |
| * |
| * \return Updates the \c cpi->cyclic_refresh with the cyclic refresh |
| * parameters and the \c cm->seg with the segmentation data. |
| */ |
| void av1_cyclic_refresh_setup(struct AV1_COMP *const cpi); |
| |
| int av1_cyclic_refresh_get_rdmult(const CYCLIC_REFRESH *cr); |
| |
| void av1_cyclic_refresh_reset_resize(struct AV1_COMP *const cpi); |
| |
| static INLINE int cyclic_refresh_segment_id_boosted(int segment_id) { |
| return segment_id == CR_SEGMENT_ID_BOOST1 || |
| segment_id == CR_SEGMENT_ID_BOOST2; |
| } |
| |
| static INLINE int cyclic_refresh_segment_id(int segment_id) { |
| if (segment_id == CR_SEGMENT_ID_BOOST1) |
| return CR_SEGMENT_ID_BOOST1; |
| else if (segment_id == CR_SEGMENT_ID_BOOST2) |
| return CR_SEGMENT_ID_BOOST2; |
| else |
| return CR_SEGMENT_ID_BASE; |
| } |
| |
| #ifdef __cplusplus |
| } // extern "C" |
| #endif |
| |
| #endif // AOM_AV1_ENCODER_AQ_CYCLICREFRESH_H_ |