| /* | 
 |  * Copyright (c) 2016, Alliance for Open Media. All rights reserved | 
 |  * | 
 |  * This source code is subject to the terms of the BSD 2 Clause License and | 
 |  * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License | 
 |  * was not distributed with this source code in the LICENSE file, you can | 
 |  * obtain it at www.aomedia.org/license/software. If the Alliance for Open | 
 |  * Media Patent License 1.0 was not distributed with this source code in the | 
 |  * PATENTS file, you can obtain it at www.aomedia.org/license/patent. | 
 |  */ | 
 |  | 
 | #include <assert.h> | 
 | #include <limits.h> | 
 |  | 
 | #include "./aom_scale_rtcd.h" | 
 |  | 
 | #include "aom_dsp/psnr.h" | 
 | #include "aom_dsp/aom_dsp_common.h" | 
 | #include "aom_mem/aom_mem.h" | 
 | #include "aom_ports/mem.h" | 
 |  | 
 | #include "av1/common/av1_loopfilter.h" | 
 | #include "av1/common/onyxc_int.h" | 
 | #include "av1/common/quant_common.h" | 
 |  | 
 | #include "av1/encoder/av1_quantize.h" | 
 | #include "av1/encoder/encoder.h" | 
 | #include "av1/encoder/picklpf.h" | 
 |  | 
 | int av1_get_max_filter_level(const AV1_COMP *cpi) { | 
 |   if (cpi->oxcf.pass == 2) { | 
 |     return cpi->twopass.section_intra_rating > 8 ? MAX_LOOP_FILTER * 3 / 4 | 
 |                                                  : MAX_LOOP_FILTER; | 
 |   } else { | 
 |     return MAX_LOOP_FILTER; | 
 |   } | 
 | } | 
 |  | 
 | static int64_t try_filter_frame(const YV12_BUFFER_CONFIG *sd, | 
 |                                 AV1_COMP *const cpi, int filt_level, | 
 |                                 int partial_frame) { | 
 |   AV1_COMMON *const cm = &cpi->common; | 
 |   int64_t filt_err; | 
 |  | 
 | #if CONFIG_VAR_TX || CONFIG_EXT_PARTITION | 
 |   av1_loop_filter_frame(cm->frame_to_show, cm, &cpi->td.mb.e_mbd, filt_level, 1, | 
 |                         partial_frame); | 
 | #else | 
 |   if (cpi->num_workers > 1) | 
 |     av1_loop_filter_frame_mt(cm->frame_to_show, cm, cpi->td.mb.e_mbd.plane, | 
 |                              filt_level, 1, partial_frame, cpi->workers, | 
 |                              cpi->num_workers, &cpi->lf_row_sync); | 
 |   else | 
 |     av1_loop_filter_frame(cm->frame_to_show, cm, &cpi->td.mb.e_mbd, filt_level, | 
 |                           1, partial_frame); | 
 | #endif | 
 |  | 
 | #if CONFIG_AOM_HIGHBITDEPTH | 
 |   if (cm->use_highbitdepth) { | 
 |     filt_err = aom_highbd_get_y_sse(sd, cm->frame_to_show); | 
 |   } else { | 
 |     filt_err = aom_get_y_sse(sd, cm->frame_to_show); | 
 |   } | 
 | #else | 
 |   filt_err = aom_get_y_sse(sd, cm->frame_to_show); | 
 | #endif  // CONFIG_AOM_HIGHBITDEPTH | 
 |  | 
 |   // Re-instate the unfiltered frame | 
 |   aom_yv12_copy_y(&cpi->last_frame_uf, cm->frame_to_show); | 
 |  | 
 |   return filt_err; | 
 | } | 
 |  | 
 | int av1_search_filter_level(const YV12_BUFFER_CONFIG *sd, AV1_COMP *cpi, | 
 |                             int partial_frame, double *best_cost_ret) { | 
 |   const AV1_COMMON *const cm = &cpi->common; | 
 |   const struct loopfilter *const lf = &cm->lf; | 
 |   const int min_filter_level = 0; | 
 |   const int max_filter_level = av1_get_max_filter_level(cpi); | 
 |   int filt_direction = 0; | 
 |   int64_t best_err; | 
 |   int filt_best; | 
 |   MACROBLOCK *x = &cpi->td.mb; | 
 |  | 
 |   // Start the search at the previous frame filter level unless it is now out of | 
 |   // range. | 
 |   int filt_mid = clamp(lf->filter_level, min_filter_level, max_filter_level); | 
 |   int filter_step = filt_mid < 16 ? 4 : filt_mid / 4; | 
 |   // Sum squared error at each filter level | 
 |   int64_t ss_err[MAX_LOOP_FILTER + 1]; | 
 |  | 
 |   // Set each entry to -1 | 
 |   memset(ss_err, 0xFF, sizeof(ss_err)); | 
 |  | 
 |   //  Make a copy of the unfiltered / processed recon buffer | 
 |   aom_yv12_copy_y(cm->frame_to_show, &cpi->last_frame_uf); | 
 |  | 
 |   best_err = try_filter_frame(sd, cpi, filt_mid, partial_frame); | 
 |   filt_best = filt_mid; | 
 |   ss_err[filt_mid] = best_err; | 
 |  | 
 |   while (filter_step > 0) { | 
 |     const int filt_high = AOMMIN(filt_mid + filter_step, max_filter_level); | 
 |     const int filt_low = AOMMAX(filt_mid - filter_step, min_filter_level); | 
 |  | 
 |     // Bias against raising loop filter in favor of lowering it. | 
 |     int64_t bias = (best_err >> (15 - (filt_mid / 8))) * filter_step; | 
 |  | 
 |     if ((cpi->oxcf.pass == 2) && (cpi->twopass.section_intra_rating < 20)) | 
 |       bias = (bias * cpi->twopass.section_intra_rating) / 20; | 
 |  | 
 |     // yx, bias less for large block size | 
 |     if (cm->tx_mode != ONLY_4X4) bias >>= 1; | 
 |  | 
 |     if (filt_direction <= 0 && filt_low != filt_mid) { | 
 |       // Get Low filter error score | 
 |       if (ss_err[filt_low] < 0) { | 
 |         ss_err[filt_low] = try_filter_frame(sd, cpi, filt_low, partial_frame); | 
 |       } | 
 |       // If value is close to the best so far then bias towards a lower loop | 
 |       // filter value. | 
 |       if (ss_err[filt_low] < (best_err + bias)) { | 
 |         // Was it actually better than the previous best? | 
 |         if (ss_err[filt_low] < best_err) { | 
 |           best_err = ss_err[filt_low]; | 
 |         } | 
 |         filt_best = filt_low; | 
 |       } | 
 |     } | 
 |  | 
 |     // Now look at filt_high | 
 |     if (filt_direction >= 0 && filt_high != filt_mid) { | 
 |       if (ss_err[filt_high] < 0) { | 
 |         ss_err[filt_high] = try_filter_frame(sd, cpi, filt_high, partial_frame); | 
 |       } | 
 |       // If value is significantly better than previous best, bias added against | 
 |       // raising filter value | 
 |       if (ss_err[filt_high] < (best_err - bias)) { | 
 |         best_err = ss_err[filt_high]; | 
 |         filt_best = filt_high; | 
 |       } | 
 |     } | 
 |  | 
 |     // Half the step distance if the best filter value was the same as last time | 
 |     if (filt_best == filt_mid) { | 
 |       filter_step /= 2; | 
 |       filt_direction = 0; | 
 |     } else { | 
 |       filt_direction = (filt_best < filt_mid) ? -1 : 1; | 
 |       filt_mid = filt_best; | 
 |     } | 
 |   } | 
 |  | 
 |   // Update best error | 
 |   best_err = ss_err[filt_best]; | 
 |  | 
 |   if (best_cost_ret) | 
 |     *best_cost_ret = RDCOST_DBL(x->rdmult, x->rddiv, 0, best_err); | 
 |   return filt_best; | 
 | } | 
 |  | 
 | #if !CONFIG_LOOP_RESTORATION | 
 | void av1_pick_filter_level(const YV12_BUFFER_CONFIG *sd, AV1_COMP *cpi, | 
 |                            LPF_PICK_METHOD method) { | 
 |   AV1_COMMON *const cm = &cpi->common; | 
 |   struct loopfilter *const lf = &cm->lf; | 
 |  | 
 |   lf->sharpness_level = cm->frame_type == KEY_FRAME ? 0 : cpi->oxcf.sharpness; | 
 |  | 
 |   if (method == LPF_PICK_MINIMAL_LPF && lf->filter_level) { | 
 |     lf->filter_level = 0; | 
 |   } else if (method >= LPF_PICK_FROM_Q) { | 
 |     const int min_filter_level = 0; | 
 |     const int max_filter_level = av1_get_max_filter_level(cpi); | 
 |     const int q = av1_ac_quant(cm->base_qindex, 0, cm->bit_depth); | 
 | // These values were determined by linear fitting the result of the | 
 | // searched level, filt_guess = q * 0.316206 + 3.87252 | 
 | #if CONFIG_AOM_HIGHBITDEPTH | 
 |     int filt_guess; | 
 |     switch (cm->bit_depth) { | 
 |       case AOM_BITS_8: | 
 |         filt_guess = ROUND_POWER_OF_TWO(q * 20723 + 1015158, 18); | 
 |         break; | 
 |       case AOM_BITS_10: | 
 |         filt_guess = ROUND_POWER_OF_TWO(q * 20723 + 4060632, 20); | 
 |         break; | 
 |       case AOM_BITS_12: | 
 |         filt_guess = ROUND_POWER_OF_TWO(q * 20723 + 16242526, 22); | 
 |         break; | 
 |       default: | 
 |         assert(0 && | 
 |                "bit_depth should be AOM_BITS_8, AOM_BITS_10 " | 
 |                "or AOM_BITS_12"); | 
 |         return; | 
 |     } | 
 | #else | 
 |     int filt_guess = ROUND_POWER_OF_TWO(q * 20723 + 1015158, 18); | 
 | #endif  // CONFIG_AOM_HIGHBITDEPTH | 
 |     if (cm->frame_type == KEY_FRAME) filt_guess -= 4; | 
 |     lf->filter_level = clamp(filt_guess, min_filter_level, max_filter_level); | 
 |   } else { | 
 |     lf->filter_level = av1_search_filter_level( | 
 |         sd, cpi, method == LPF_PICK_FROM_SUBIMAGE, NULL); | 
 |   } | 
 |  | 
 | #if CONFIG_EXT_TILE | 
 |   // TODO(any): 0 loopfilter level is only necessary if individual tile | 
 |   // decoding is required. We need to communicate this requirement to this | 
 |   // code and force loop filter level 0 only if required. | 
 |   lf->filter_level = 0; | 
 | #endif  // CONFIG_EXT_TILE | 
 | } | 
 | #endif  // !CONFIG_LOOP_RESTORATION |