|  | /* | 
|  | * Copyright (c) 2016, Alliance for Open Media. All rights reserved | 
|  | * | 
|  | * This source code is subject to the terms of the BSD 2 Clause License and | 
|  | * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License | 
|  | * was not distributed with this source code in the LICENSE file, you can | 
|  | * obtain it at www.aomedia.org/license/software. If the Alliance for Open | 
|  | * Media Patent License 1.0 was not distributed with this source code in the | 
|  | * PATENTS file, you can obtain it at www.aomedia.org/license/patent. | 
|  | */ | 
|  |  | 
|  | #include "config/aom_config.h" | 
|  | #include "config/av1_rtcd.h" | 
|  | #include "config/aom_dsp_rtcd.h" | 
|  |  | 
|  | #include "aom_dsp/bitwriter.h" | 
|  | #include "aom_dsp/quantize.h" | 
|  | #include "aom_mem/aom_mem.h" | 
|  | #include "aom_ports/mem.h" | 
|  |  | 
|  | #if CONFIG_BITSTREAM_DEBUG || CONFIG_MISMATCH_DEBUG | 
|  | #include "aom_util/debug_util.h" | 
|  | #endif  // CONFIG_BITSTREAM_DEBUG || CONFIG_MISMATCH_DEBUG | 
|  |  | 
|  | #include "av1/common/cfl.h" | 
|  | #include "av1/common/idct.h" | 
|  | #include "av1/common/reconinter.h" | 
|  | #include "av1/common/reconintra.h" | 
|  | #include "av1/common/scan.h" | 
|  |  | 
|  | #include "av1/encoder/av1_quantize.h" | 
|  | #include "av1/encoder/encodemb.h" | 
|  | #include "av1/encoder/hybrid_fwd_txfm.h" | 
|  | #include "av1/encoder/txb_rdopt.h" | 
|  | #include "av1/encoder/rd.h" | 
|  | #include "av1/encoder/rdopt.h" | 
|  |  | 
|  | void av1_subtract_block(BitDepthInfo bd_info, int rows, int cols, int16_t *diff, | 
|  | ptrdiff_t diff_stride, const uint8_t *src8, | 
|  | ptrdiff_t src_stride, const uint8_t *pred8, | 
|  | ptrdiff_t pred_stride) { | 
|  | assert(rows >= 4 && cols >= 4); | 
|  | #if CONFIG_AV1_HIGHBITDEPTH | 
|  | if (bd_info.use_highbitdepth_buf) { | 
|  | aom_highbd_subtract_block(rows, cols, diff, diff_stride, src8, src_stride, | 
|  | pred8, pred_stride, bd_info.bit_depth); | 
|  | return; | 
|  | } | 
|  | #endif | 
|  | (void)bd_info; | 
|  | aom_subtract_block(rows, cols, diff, diff_stride, src8, src_stride, pred8, | 
|  | pred_stride); | 
|  | } | 
|  |  | 
|  | void av1_subtract_txb(MACROBLOCK *x, int plane, BLOCK_SIZE plane_bsize, | 
|  | int blk_col, int blk_row, TX_SIZE tx_size) { | 
|  | MACROBLOCKD *const xd = &x->e_mbd; | 
|  | const BitDepthInfo bd_info = get_bit_depth_info(xd); | 
|  | struct macroblock_plane *const p = &x->plane[plane]; | 
|  | const struct macroblockd_plane *const pd = &x->e_mbd.plane[plane]; | 
|  | const int diff_stride = block_size_wide[plane_bsize]; | 
|  | const int src_stride = p->src.stride; | 
|  | const int dst_stride = pd->dst.stride; | 
|  | const int tx1d_width = tx_size_wide[tx_size]; | 
|  | const int tx1d_height = tx_size_high[tx_size]; | 
|  | uint8_t *dst = &pd->dst.buf[(blk_row * dst_stride + blk_col) << MI_SIZE_LOG2]; | 
|  | uint8_t *src = &p->src.buf[(blk_row * src_stride + blk_col) << MI_SIZE_LOG2]; | 
|  | int16_t *src_diff = | 
|  | &p->src_diff[(blk_row * diff_stride + blk_col) << MI_SIZE_LOG2]; | 
|  | av1_subtract_block(bd_info, tx1d_height, tx1d_width, src_diff, diff_stride, | 
|  | src, src_stride, dst, dst_stride); | 
|  | } | 
|  |  | 
|  | void av1_subtract_plane(MACROBLOCK *x, BLOCK_SIZE plane_bsize, int plane) { | 
|  | struct macroblock_plane *const p = &x->plane[plane]; | 
|  | const struct macroblockd_plane *const pd = &x->e_mbd.plane[plane]; | 
|  | assert(plane_bsize < BLOCK_SIZES_ALL); | 
|  | const int bw = block_size_wide[plane_bsize]; | 
|  | const int bh = block_size_high[plane_bsize]; | 
|  | const MACROBLOCKD *xd = &x->e_mbd; | 
|  | const BitDepthInfo bd_info = get_bit_depth_info(xd); | 
|  |  | 
|  | av1_subtract_block(bd_info, bh, bw, p->src_diff, bw, p->src.buf, | 
|  | p->src.stride, pd->dst.buf, pd->dst.stride); | 
|  | } | 
|  |  | 
|  | int av1_optimize_b(const struct AV1_COMP *cpi, MACROBLOCK *x, int plane, | 
|  | int block, TX_SIZE tx_size, TX_TYPE tx_type, | 
|  | const TXB_CTX *const txb_ctx, int *rate_cost) { | 
|  | MACROBLOCKD *const xd = &x->e_mbd; | 
|  | struct macroblock_plane *const p = &x->plane[plane]; | 
|  | const int eob = p->eobs[block]; | 
|  | const int segment_id = xd->mi[0]->segment_id; | 
|  |  | 
|  | if (eob == 0 || !cpi->optimize_seg_arr[segment_id] || | 
|  | xd->lossless[segment_id]) { | 
|  | *rate_cost = av1_cost_skip_txb(&x->coeff_costs, txb_ctx, plane, tx_size); | 
|  | return eob; | 
|  | } | 
|  |  | 
|  | return av1_optimize_txb(cpi, x, plane, block, tx_size, tx_type, txb_ctx, | 
|  | rate_cost, cpi->oxcf.algo_cfg.sharpness); | 
|  | } | 
|  |  | 
|  | // Hyper-parameters for dropout optimization, based on following logics. | 
|  | // TODO(yjshen): These settings are tuned by experiments. They may still be | 
|  | // optimized for better performance. | 
|  | // (1) Coefficients which are large enough will ALWAYS be kept. | 
|  | const tran_low_t DROPOUT_COEFF_MAX = 2;  // Max dropout-able coefficient. | 
|  | // (2) Continuous coefficients will ALWAYS be kept. Here rigorous continuity is | 
|  | //     NOT required. For example, `5 0 0 0 7` is treated as two continuous | 
|  | //     coefficients if three zeros do not fulfill the dropout condition. | 
|  | const int DROPOUT_CONTINUITY_MAX = 2;  // Max dropout-able continuous coeff. | 
|  | // (3) Dropout operation is NOT applicable to blocks with large or small | 
|  | //     quantization index. | 
|  | const int DROPOUT_Q_MAX = 128; | 
|  | const int DROPOUT_Q_MIN = 16; | 
|  | // (4) Recall that dropout optimization will forcibly set some quantized | 
|  | //     coefficients to zero. The key logic on determining whether a coefficient | 
|  | //     should be dropped is to check the number of continuous zeros before AND | 
|  | //     after this coefficient. The exact number of zeros for judgement depends | 
|  | //     on block size and quantization index. More concretely, block size | 
|  | //     determines the base number of zeros, while quantization index determines | 
|  | //     the multiplier. Intuitively, larger block requires more zeros and larger | 
|  | //     quantization index also requires more zeros (more information is lost | 
|  | //     when using larger quantization index). | 
|  | const int DROPOUT_BEFORE_BASE_MAX = 32;  // Max base number for leading zeros. | 
|  | const int DROPOUT_BEFORE_BASE_MIN = 16;  // Min base number for leading zeros. | 
|  | const int DROPOUT_AFTER_BASE_MAX = 32;   // Max base number for trailing zeros. | 
|  | const int DROPOUT_AFTER_BASE_MIN = 16;   // Min base number for trailing zeros. | 
|  | const int DROPOUT_MULTIPLIER_MAX = 8;    // Max multiplier on number of zeros. | 
|  | const int DROPOUT_MULTIPLIER_MIN = 2;    // Min multiplier on number of zeros. | 
|  | const int DROPOUT_MULTIPLIER_Q_BASE = 32;  // Base Q to compute multiplier. | 
|  |  | 
|  | void av1_dropout_qcoeff(MACROBLOCK *mb, int plane, int block, TX_SIZE tx_size, | 
|  | TX_TYPE tx_type, int qindex) { | 
|  | const int tx_width = tx_size_wide[tx_size]; | 
|  | const int tx_height = tx_size_high[tx_size]; | 
|  |  | 
|  | // Early return if `qindex` is out of range. | 
|  | if (qindex > DROPOUT_Q_MAX || qindex < DROPOUT_Q_MIN) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | // Compute number of zeros used for dropout judgement. | 
|  | const int base_size = AOMMAX(tx_width, tx_height); | 
|  | const int multiplier = CLIP(qindex / DROPOUT_MULTIPLIER_Q_BASE, | 
|  | DROPOUT_MULTIPLIER_MIN, DROPOUT_MULTIPLIER_MAX); | 
|  | const int dropout_num_before = | 
|  | multiplier * | 
|  | CLIP(base_size, DROPOUT_BEFORE_BASE_MIN, DROPOUT_BEFORE_BASE_MAX); | 
|  | const int dropout_num_after = | 
|  | multiplier * | 
|  | CLIP(base_size, DROPOUT_AFTER_BASE_MIN, DROPOUT_AFTER_BASE_MAX); | 
|  |  | 
|  | av1_dropout_qcoeff_num(mb, plane, block, tx_size, tx_type, dropout_num_before, | 
|  | dropout_num_after); | 
|  | } | 
|  |  | 
|  | void av1_dropout_qcoeff_num(MACROBLOCK *mb, int plane, int block, | 
|  | TX_SIZE tx_size, TX_TYPE tx_type, | 
|  | int dropout_num_before, int dropout_num_after) { | 
|  | const struct macroblock_plane *const p = &mb->plane[plane]; | 
|  | tran_low_t *const qcoeff = p->qcoeff + BLOCK_OFFSET(block); | 
|  | tran_low_t *const dqcoeff = p->dqcoeff + BLOCK_OFFSET(block); | 
|  | const int max_eob = av1_get_max_eob(tx_size); | 
|  | const SCAN_ORDER *const scan_order = get_scan(tx_size, tx_type); | 
|  |  | 
|  | // Early return if there are not enough non-zero coefficients. | 
|  | if (p->eobs[block] == 0 || p->eobs[block] <= dropout_num_before) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | int count_zeros_before = 0; | 
|  | int count_zeros_after = 0; | 
|  | int count_nonzeros = 0; | 
|  | // Index of the first non-zero coefficient after sufficient number of | 
|  | // continuous zeros. If equals to `-1`, it means number of leading zeros | 
|  | // hasn't reach `dropout_num_before`. | 
|  | int idx = -1; | 
|  | int eob = 0;  // New end of block. | 
|  |  | 
|  | for (int i = 0; i < p->eobs[block]; ++i) { | 
|  | const int scan_idx = scan_order->scan[i]; | 
|  | if (abs(qcoeff[scan_idx]) > DROPOUT_COEFF_MAX) { | 
|  | // Keep large coefficients. | 
|  | count_zeros_before = 0; | 
|  | count_zeros_after = 0; | 
|  | idx = -1; | 
|  | eob = i + 1; | 
|  | } else if (qcoeff[scan_idx] == 0) {  // Count zeros. | 
|  | if (idx == -1) { | 
|  | ++count_zeros_before; | 
|  | } else { | 
|  | ++count_zeros_after; | 
|  | } | 
|  | } else {  // Count non-zeros. | 
|  | if (count_zeros_before >= dropout_num_before) { | 
|  | idx = (idx == -1) ? i : idx; | 
|  | ++count_nonzeros; | 
|  | } else { | 
|  | count_zeros_before = 0; | 
|  | eob = i + 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | // Handle continuity. | 
|  | if (count_nonzeros > DROPOUT_CONTINUITY_MAX) { | 
|  | count_zeros_before = 0; | 
|  | count_zeros_after = 0; | 
|  | count_nonzeros = 0; | 
|  | idx = -1; | 
|  | eob = i + 1; | 
|  | } | 
|  |  | 
|  | // Handle the trailing zeros after original end of block. | 
|  | if (idx != -1 && i == p->eobs[block] - 1) { | 
|  | count_zeros_after += (max_eob - p->eobs[block]); | 
|  | } | 
|  |  | 
|  | // Set redundant coefficients to zeros if needed. | 
|  | if (count_zeros_after >= dropout_num_after) { | 
|  | for (int j = idx; j <= i; ++j) { | 
|  | qcoeff[scan_order->scan[j]] = 0; | 
|  | dqcoeff[scan_order->scan[j]] = 0; | 
|  | } | 
|  | count_zeros_before += (i - idx + 1); | 
|  | count_zeros_after = 0; | 
|  | count_nonzeros = 0; | 
|  | } else if (i == p->eobs[block] - 1) { | 
|  | eob = i + 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (eob != p->eobs[block]) { | 
|  | p->eobs[block] = eob; | 
|  | p->txb_entropy_ctx[block] = | 
|  | av1_get_txb_entropy_context(qcoeff, scan_order, eob); | 
|  | } | 
|  | } | 
|  |  | 
|  | // Settings for optimization type. NOTE: To set optimization type for all intra | 
|  | // frames, both `KEY_BLOCK_OPT_TYPE` and `INTRA_BLOCK_OPT_TYPE` should be set. | 
|  | // TODO(yjshen): These settings are hard-coded and look okay for now. They | 
|  | // should be made configurable later. | 
|  | // Blocks of key frames ONLY. | 
|  | const OPT_TYPE KEY_BLOCK_OPT_TYPE = TRELLIS_DROPOUT_OPT; | 
|  | // Blocks of intra frames (key frames EXCLUSIVE). | 
|  | const OPT_TYPE INTRA_BLOCK_OPT_TYPE = TRELLIS_DROPOUT_OPT; | 
|  | // Blocks of inter frames. (NOTE: Dropout optimization is DISABLED by default | 
|  | // if trellis optimization is on for inter frames.) | 
|  | const OPT_TYPE INTER_BLOCK_OPT_TYPE = TRELLIS_DROPOUT_OPT; | 
|  |  | 
|  | enum { | 
|  | QUANT_FUNC_LOWBD = 0, | 
|  | QUANT_FUNC_HIGHBD = 1, | 
|  | QUANT_FUNC_TYPES = 2 | 
|  | } UENUM1BYTE(QUANT_FUNC); | 
|  |  | 
|  | #if CONFIG_AV1_HIGHBITDEPTH | 
|  | static AV1_QUANT_FACADE | 
|  | quant_func_list[AV1_XFORM_QUANT_TYPES][QUANT_FUNC_TYPES] = { | 
|  | { av1_quantize_fp_facade, av1_highbd_quantize_fp_facade }, | 
|  | { av1_quantize_b_facade, av1_highbd_quantize_b_facade }, | 
|  | { av1_quantize_dc_facade, av1_highbd_quantize_dc_facade }, | 
|  | { NULL, NULL } | 
|  | }; | 
|  | #else | 
|  | static AV1_QUANT_FACADE quant_func_list[AV1_XFORM_QUANT_TYPES] = { | 
|  | av1_quantize_fp_facade, av1_quantize_b_facade, av1_quantize_dc_facade, NULL | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | // Computes the transform for DC only blocks | 
|  | void av1_xform_dc_only(MACROBLOCK *x, int plane, int block, | 
|  | TxfmParam *txfm_param, int64_t per_px_mean) { | 
|  | assert(per_px_mean != INT64_MAX); | 
|  | const struct macroblock_plane *const p = &x->plane[plane]; | 
|  | const int block_offset = BLOCK_OFFSET(block); | 
|  | tran_low_t *const coeff = p->coeff + block_offset; | 
|  | const int n_coeffs = av1_get_max_eob(txfm_param->tx_size); | 
|  | memset(coeff, 0, sizeof(*coeff) * n_coeffs); | 
|  | coeff[0] = | 
|  | (tran_low_t)((per_px_mean * dc_coeff_scale[txfm_param->tx_size]) >> 12); | 
|  | } | 
|  |  | 
|  | void av1_xform_quant(MACROBLOCK *x, int plane, int block, int blk_row, | 
|  | int blk_col, BLOCK_SIZE plane_bsize, TxfmParam *txfm_param, | 
|  | const QUANT_PARAM *qparam) { | 
|  | av1_xform(x, plane, block, blk_row, blk_col, plane_bsize, txfm_param); | 
|  | av1_quant(x, plane, block, txfm_param, qparam); | 
|  | } | 
|  |  | 
|  | void av1_xform(MACROBLOCK *x, int plane, int block, int blk_row, int blk_col, | 
|  | BLOCK_SIZE plane_bsize, TxfmParam *txfm_param) { | 
|  | const struct macroblock_plane *const p = &x->plane[plane]; | 
|  | const int block_offset = BLOCK_OFFSET(block); | 
|  | tran_low_t *const coeff = p->coeff + block_offset; | 
|  | const int diff_stride = block_size_wide[plane_bsize]; | 
|  |  | 
|  | const int src_offset = (blk_row * diff_stride + blk_col); | 
|  | const int16_t *src_diff = &p->src_diff[src_offset << MI_SIZE_LOG2]; | 
|  |  | 
|  | av1_fwd_txfm(src_diff, coeff, diff_stride, txfm_param); | 
|  | } | 
|  |  | 
|  | void av1_quant(MACROBLOCK *x, int plane, int block, TxfmParam *txfm_param, | 
|  | const QUANT_PARAM *qparam) { | 
|  | const struct macroblock_plane *const p = &x->plane[plane]; | 
|  | const SCAN_ORDER *const scan_order = | 
|  | get_scan(txfm_param->tx_size, txfm_param->tx_type); | 
|  | const int block_offset = BLOCK_OFFSET(block); | 
|  | tran_low_t *const coeff = p->coeff + block_offset; | 
|  | tran_low_t *const qcoeff = p->qcoeff + block_offset; | 
|  | tran_low_t *const dqcoeff = p->dqcoeff + block_offset; | 
|  | uint16_t *const eob = &p->eobs[block]; | 
|  |  | 
|  | if (qparam->xform_quant_idx != AV1_XFORM_QUANT_SKIP_QUANT) { | 
|  | const int n_coeffs = av1_get_max_eob(txfm_param->tx_size); | 
|  | if (LIKELY(!x->seg_skip_block)) { | 
|  | #if CONFIG_AV1_HIGHBITDEPTH | 
|  | quant_func_list[qparam->xform_quant_idx][txfm_param->is_hbd]( | 
|  | coeff, n_coeffs, p, qcoeff, dqcoeff, eob, scan_order, qparam); | 
|  | #else | 
|  | quant_func_list[qparam->xform_quant_idx]( | 
|  | coeff, n_coeffs, p, qcoeff, dqcoeff, eob, scan_order, qparam); | 
|  | #endif | 
|  | } else { | 
|  | av1_quantize_skip(n_coeffs, qcoeff, dqcoeff, eob); | 
|  | } | 
|  | } | 
|  | // use_optimize_b is true means av1_optimze_b will be called, | 
|  | // thus cannot update entropy ctx now (performed in optimize_b) | 
|  | if (qparam->use_optimize_b) { | 
|  | p->txb_entropy_ctx[block] = 0; | 
|  | } else { | 
|  | p->txb_entropy_ctx[block] = | 
|  | av1_get_txb_entropy_context(qcoeff, scan_order, *eob); | 
|  | } | 
|  | } | 
|  |  | 
|  | void av1_setup_xform(const AV1_COMMON *cm, MACROBLOCK *x, TX_SIZE tx_size, | 
|  | TX_TYPE tx_type, TxfmParam *txfm_param) { | 
|  | MACROBLOCKD *const xd = &x->e_mbd; | 
|  | MB_MODE_INFO *const mbmi = xd->mi[0]; | 
|  |  | 
|  | txfm_param->tx_type = tx_type; | 
|  | txfm_param->tx_size = tx_size; | 
|  | txfm_param->lossless = xd->lossless[mbmi->segment_id]; | 
|  | txfm_param->tx_set_type = av1_get_ext_tx_set_type( | 
|  | tx_size, is_inter_block(mbmi), cm->features.reduced_tx_set_used); | 
|  |  | 
|  | txfm_param->bd = xd->bd; | 
|  | txfm_param->is_hbd = is_cur_buf_hbd(xd); | 
|  | } | 
|  | void av1_setup_quant(TX_SIZE tx_size, int use_optimize_b, int xform_quant_idx, | 
|  | int use_quant_b_adapt, QUANT_PARAM *qparam) { | 
|  | qparam->log_scale = av1_get_tx_scale(tx_size); | 
|  | qparam->tx_size = tx_size; | 
|  |  | 
|  | qparam->use_quant_b_adapt = use_quant_b_adapt; | 
|  |  | 
|  | // TODO(bohanli): optimize_b and quantization idx has relationship, | 
|  | // but is kind of buried and complicated in different encoding stages. | 
|  | // Should have a unified function to derive quant_idx, rather than | 
|  | // determine and pass in the quant_idx | 
|  | qparam->use_optimize_b = use_optimize_b; | 
|  | qparam->xform_quant_idx = xform_quant_idx; | 
|  |  | 
|  | qparam->qmatrix = NULL; | 
|  | qparam->iqmatrix = NULL; | 
|  | } | 
|  | void av1_setup_qmatrix(const CommonQuantParams *quant_params, | 
|  | const MACROBLOCKD *xd, int plane, TX_SIZE tx_size, | 
|  | TX_TYPE tx_type, QUANT_PARAM *qparam) { | 
|  | qparam->qmatrix = av1_get_qmatrix(quant_params, xd, plane, tx_size, tx_type); | 
|  | qparam->iqmatrix = | 
|  | av1_get_iqmatrix(quant_params, xd, plane, tx_size, tx_type); | 
|  | } | 
|  |  | 
|  | static void encode_block(int plane, int block, int blk_row, int blk_col, | 
|  | BLOCK_SIZE plane_bsize, TX_SIZE tx_size, void *arg, | 
|  | RUN_TYPE dry_run) { | 
|  | (void)dry_run; | 
|  | struct encode_b_args *const args = arg; | 
|  | const AV1_COMP *const cpi = args->cpi; | 
|  | const AV1_COMMON *const cm = &cpi->common; | 
|  | MACROBLOCK *const x = args->x; | 
|  | MACROBLOCKD *const xd = &x->e_mbd; | 
|  | MB_MODE_INFO *mbmi = xd->mi[0]; | 
|  | struct macroblock_plane *const p = &x->plane[plane]; | 
|  | struct macroblockd_plane *const pd = &xd->plane[plane]; | 
|  | tran_low_t *const dqcoeff = p->dqcoeff + BLOCK_OFFSET(block); | 
|  | uint8_t *dst; | 
|  | ENTROPY_CONTEXT *a, *l; | 
|  | int dummy_rate_cost = 0; | 
|  |  | 
|  | const int bw = mi_size_wide[plane_bsize]; | 
|  | dst = &pd->dst.buf[(blk_row * pd->dst.stride + blk_col) << MI_SIZE_LOG2]; | 
|  |  | 
|  | a = &args->ta[blk_col]; | 
|  | l = &args->tl[blk_row]; | 
|  |  | 
|  | TX_TYPE tx_type = DCT_DCT; | 
|  | const int blk_skip_idx = cpi->sf.rt_sf.use_nonrd_pick_mode | 
|  | ? blk_row * bw / 4 + blk_col / 2 | 
|  | : blk_row * bw + blk_col; | 
|  | if (!is_blk_skip(x->txfm_search_info.blk_skip, plane, blk_skip_idx) && | 
|  | !mbmi->skip_mode) { | 
|  | tx_type = av1_get_tx_type(xd, pd->plane_type, blk_row, blk_col, tx_size, | 
|  | cm->features.reduced_tx_set_used); | 
|  | TxfmParam txfm_param; | 
|  | QUANT_PARAM quant_param; | 
|  | const int use_trellis = is_trellis_used(args->enable_optimize_b, dry_run); | 
|  | int quant_idx; | 
|  | if (use_trellis) | 
|  | quant_idx = AV1_XFORM_QUANT_FP; | 
|  | else | 
|  | quant_idx = | 
|  | USE_B_QUANT_NO_TRELLIS ? AV1_XFORM_QUANT_B : AV1_XFORM_QUANT_FP; | 
|  | av1_setup_xform(cm, x, tx_size, tx_type, &txfm_param); | 
|  | av1_setup_quant(tx_size, use_trellis, quant_idx, | 
|  | cpi->oxcf.q_cfg.quant_b_adapt, &quant_param); | 
|  | av1_setup_qmatrix(&cm->quant_params, xd, plane, tx_size, tx_type, | 
|  | &quant_param); | 
|  | av1_xform_quant(x, plane, block, blk_row, blk_col, plane_bsize, &txfm_param, | 
|  | &quant_param); | 
|  |  | 
|  | // Whether trellis or dropout optimization is required for inter frames. | 
|  | const bool do_trellis = INTER_BLOCK_OPT_TYPE == TRELLIS_OPT || | 
|  | INTER_BLOCK_OPT_TYPE == TRELLIS_DROPOUT_OPT; | 
|  | const bool do_dropout = INTER_BLOCK_OPT_TYPE == DROPOUT_OPT || | 
|  | INTER_BLOCK_OPT_TYPE == TRELLIS_DROPOUT_OPT; | 
|  |  | 
|  | if (quant_param.use_optimize_b && do_trellis) { | 
|  | TXB_CTX txb_ctx; | 
|  | get_txb_ctx(plane_bsize, tx_size, plane, a, l, &txb_ctx); | 
|  | av1_optimize_b(args->cpi, x, plane, block, tx_size, tx_type, &txb_ctx, | 
|  | &dummy_rate_cost); | 
|  | } | 
|  | if (!quant_param.use_optimize_b && do_dropout) { | 
|  | av1_dropout_qcoeff(x, plane, block, tx_size, tx_type, | 
|  | cm->quant_params.base_qindex); | 
|  | } | 
|  | } else { | 
|  | p->eobs[block] = 0; | 
|  | p->txb_entropy_ctx[block] = 0; | 
|  | } | 
|  |  | 
|  | av1_set_txb_context(x, plane, block, tx_size, a, l); | 
|  |  | 
|  | if (p->eobs[block]) { | 
|  | *(args->skip) = 0; | 
|  | av1_inverse_transform_block(xd, dqcoeff, plane, tx_type, tx_size, dst, | 
|  | pd->dst.stride, p->eobs[block], | 
|  | cm->features.reduced_tx_set_used); | 
|  | } | 
|  |  | 
|  | // TODO(debargha, jingning): Temporarily disable txk_type check for eob=0 | 
|  | // case. It is possible that certain collision in hash index would cause | 
|  | // the assertion failure. To further optimize the rate-distortion | 
|  | // performance, we need to re-visit this part and enable this assert | 
|  | // again. | 
|  | if (p->eobs[block] == 0 && plane == 0) { | 
|  | #if 0 | 
|  | if (args->cpi->oxcf.q_cfg.aq_mode == NO_AQ && | 
|  | args->cpi->oxcf.q_cfg.deltaq_mode == NO_DELTA_Q) { | 
|  | // TODO(jingning,angiebird,huisu@google.com): enable txk_check when | 
|  | // enable_optimize_b is true to detect potential RD bug. | 
|  | const uint8_t disable_txk_check = args->enable_optimize_b; | 
|  | if (!disable_txk_check) { | 
|  | assert(xd->tx_type_map[blk_row * xd->tx_type_map_stride + blk_col)] == | 
|  | DCT_DCT); | 
|  | } | 
|  | } | 
|  | #endif | 
|  | update_txk_array(xd, blk_row, blk_col, tx_size, DCT_DCT); | 
|  | } | 
|  |  | 
|  | #if CONFIG_MISMATCH_DEBUG | 
|  | if (dry_run == OUTPUT_ENABLED) { | 
|  | int pixel_c, pixel_r; | 
|  | BLOCK_SIZE bsize = txsize_to_bsize[tx_size]; | 
|  | int blk_w = block_size_wide[bsize]; | 
|  | int blk_h = block_size_high[bsize]; | 
|  | mi_to_pixel_loc(&pixel_c, &pixel_r, xd->mi_col, xd->mi_row, blk_col, | 
|  | blk_row, pd->subsampling_x, pd->subsampling_y); | 
|  | mismatch_record_block_tx(dst, pd->dst.stride, cm->current_frame.order_hint, | 
|  | plane, pixel_c, pixel_r, blk_w, blk_h, | 
|  | xd->cur_buf->flags & YV12_FLAG_HIGHBITDEPTH); | 
|  | } | 
|  | #endif | 
|  | } | 
|  |  | 
|  | static void encode_block_inter(int plane, int block, int blk_row, int blk_col, | 
|  | BLOCK_SIZE plane_bsize, TX_SIZE tx_size, | 
|  | void *arg, RUN_TYPE dry_run) { | 
|  | struct encode_b_args *const args = arg; | 
|  | MACROBLOCK *const x = args->x; | 
|  | MACROBLOCKD *const xd = &x->e_mbd; | 
|  | MB_MODE_INFO *const mbmi = xd->mi[0]; | 
|  | const struct macroblockd_plane *const pd = &xd->plane[plane]; | 
|  | const int max_blocks_high = max_block_high(xd, plane_bsize, plane); | 
|  | const int max_blocks_wide = max_block_wide(xd, plane_bsize, plane); | 
|  |  | 
|  | if (blk_row >= max_blocks_high || blk_col >= max_blocks_wide) return; | 
|  |  | 
|  | const TX_SIZE plane_tx_size = | 
|  | plane ? av1_get_max_uv_txsize(mbmi->bsize, pd->subsampling_x, | 
|  | pd->subsampling_y) | 
|  | : mbmi->inter_tx_size[av1_get_txb_size_index(plane_bsize, blk_row, | 
|  | blk_col)]; | 
|  | if (!plane) { | 
|  | assert(tx_size_wide[tx_size] >= tx_size_wide[plane_tx_size] && | 
|  | tx_size_high[tx_size] >= tx_size_high[plane_tx_size]); | 
|  | } | 
|  |  | 
|  | if (tx_size == plane_tx_size || plane) { | 
|  | encode_block(plane, block, blk_row, blk_col, plane_bsize, tx_size, arg, | 
|  | dry_run); | 
|  | } else { | 
|  | assert(tx_size < TX_SIZES_ALL); | 
|  | const TX_SIZE sub_txs = sub_tx_size_map[tx_size]; | 
|  | assert(IMPLIES(tx_size <= TX_4X4, sub_txs == tx_size)); | 
|  | assert(IMPLIES(tx_size > TX_4X4, sub_txs < tx_size)); | 
|  | // This is the square transform block partition entry point. | 
|  | const int bsw = tx_size_wide_unit[sub_txs]; | 
|  | const int bsh = tx_size_high_unit[sub_txs]; | 
|  | const int step = bsh * bsw; | 
|  | const int row_end = | 
|  | AOMMIN(tx_size_high_unit[tx_size], max_blocks_high - blk_row); | 
|  | const int col_end = | 
|  | AOMMIN(tx_size_wide_unit[tx_size], max_blocks_wide - blk_col); | 
|  | assert(bsw > 0 && bsh > 0); | 
|  |  | 
|  | for (int row = 0; row < row_end; row += bsh) { | 
|  | const int offsetr = blk_row + row; | 
|  | for (int col = 0; col < col_end; col += bsw) { | 
|  | const int offsetc = blk_col + col; | 
|  |  | 
|  | encode_block_inter(plane, block, offsetr, offsetc, plane_bsize, sub_txs, | 
|  | arg, dry_run); | 
|  | block += step; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | void av1_foreach_transformed_block_in_plane( | 
|  | const MACROBLOCKD *const xd, BLOCK_SIZE plane_bsize, int plane, | 
|  | foreach_transformed_block_visitor visit, void *arg) { | 
|  | const struct macroblockd_plane *const pd = &xd->plane[plane]; | 
|  | // block and transform sizes, in number of 4x4 blocks log 2 ("*_b") | 
|  | // 4x4=0, 8x8=2, 16x16=4, 32x32=6, 64x64=8 | 
|  | // transform size varies per plane, look it up in a common way. | 
|  | const TX_SIZE tx_size = av1_get_tx_size(plane, xd); | 
|  | const uint8_t txw_unit = tx_size_wide_unit[tx_size]; | 
|  | const uint8_t txh_unit = tx_size_high_unit[tx_size]; | 
|  | const int step = txw_unit * txh_unit; | 
|  |  | 
|  | // If mb_to_right_edge is < 0 we are in a situation in which | 
|  | // the current block size extends into the UMV and we won't | 
|  | // visit the sub blocks that are wholly within the UMV. | 
|  | const int max_blocks_wide = max_block_wide(xd, plane_bsize, plane); | 
|  | const int max_blocks_high = max_block_high(xd, plane_bsize, plane); | 
|  | const BLOCK_SIZE max_unit_bsize = | 
|  | get_plane_block_size(BLOCK_64X64, pd->subsampling_x, pd->subsampling_y); | 
|  | const int mu_blocks_wide = | 
|  | AOMMIN(mi_size_wide[max_unit_bsize], max_blocks_wide); | 
|  | const int mu_blocks_high = | 
|  | AOMMIN(mi_size_high[max_unit_bsize], max_blocks_high); | 
|  |  | 
|  | // Keep track of the row and column of the blocks we use so that we know | 
|  | // if we are in the unrestricted motion border. | 
|  | int i = 0; | 
|  | for (int r = 0; r < max_blocks_high; r += mu_blocks_high) { | 
|  | const int unit_height = AOMMIN(mu_blocks_high + r, max_blocks_high); | 
|  | // Skip visiting the sub blocks that are wholly within the UMV. | 
|  | for (int c = 0; c < max_blocks_wide; c += mu_blocks_wide) { | 
|  | const int unit_width = AOMMIN(mu_blocks_wide + c, max_blocks_wide); | 
|  | for (int blk_row = r; blk_row < unit_height; blk_row += txh_unit) { | 
|  | for (int blk_col = c; blk_col < unit_width; blk_col += txw_unit) { | 
|  | visit(plane, i, blk_row, blk_col, plane_bsize, tx_size, arg); | 
|  | i += step; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | typedef struct encode_block_pass1_args { | 
|  | AV1_COMP *cpi; | 
|  | MACROBLOCK *x; | 
|  | } encode_block_pass1_args; | 
|  |  | 
|  | static void encode_block_pass1(int plane, int block, int blk_row, int blk_col, | 
|  | BLOCK_SIZE plane_bsize, TX_SIZE tx_size, | 
|  | void *arg) { | 
|  | encode_block_pass1_args *args = (encode_block_pass1_args *)arg; | 
|  | AV1_COMP *cpi = args->cpi; | 
|  | AV1_COMMON *cm = &cpi->common; | 
|  | MACROBLOCK *const x = args->x; | 
|  | MACROBLOCKD *const xd = &x->e_mbd; | 
|  | struct macroblock_plane *const p = &x->plane[plane]; | 
|  | struct macroblockd_plane *const pd = &xd->plane[plane]; | 
|  | tran_low_t *const dqcoeff = p->dqcoeff + BLOCK_OFFSET(block); | 
|  |  | 
|  | uint8_t *dst; | 
|  | dst = &pd->dst.buf[(blk_row * pd->dst.stride + blk_col) << MI_SIZE_LOG2]; | 
|  |  | 
|  | TxfmParam txfm_param; | 
|  | QUANT_PARAM quant_param; | 
|  |  | 
|  | av1_setup_xform(cm, x, tx_size, DCT_DCT, &txfm_param); | 
|  | av1_setup_quant(tx_size, 0, AV1_XFORM_QUANT_B, cpi->oxcf.q_cfg.quant_b_adapt, | 
|  | &quant_param); | 
|  | av1_setup_qmatrix(&cm->quant_params, xd, plane, tx_size, DCT_DCT, | 
|  | &quant_param); | 
|  |  | 
|  | av1_xform_quant(x, plane, block, blk_row, blk_col, plane_bsize, &txfm_param, | 
|  | &quant_param); | 
|  |  | 
|  | if (p->eobs[block] > 0) { | 
|  | txfm_param.eob = p->eobs[block]; | 
|  | if (txfm_param.is_hbd) { | 
|  | av1_highbd_inv_txfm_add(dqcoeff, dst, pd->dst.stride, &txfm_param); | 
|  | return; | 
|  | } | 
|  | av1_inv_txfm_add(dqcoeff, dst, pd->dst.stride, &txfm_param); | 
|  | } | 
|  | } | 
|  |  | 
|  | void av1_encode_sby_pass1(AV1_COMP *cpi, MACROBLOCK *x, BLOCK_SIZE bsize) { | 
|  | encode_block_pass1_args args = { cpi, x }; | 
|  | av1_subtract_plane(x, bsize, 0); | 
|  | av1_foreach_transformed_block_in_plane(&x->e_mbd, bsize, 0, | 
|  | encode_block_pass1, &args); | 
|  | } | 
|  |  | 
|  | void av1_encode_sb(const struct AV1_COMP *cpi, MACROBLOCK *x, BLOCK_SIZE bsize, | 
|  | RUN_TYPE dry_run) { | 
|  | assert(bsize < BLOCK_SIZES_ALL); | 
|  | MACROBLOCKD *const xd = &x->e_mbd; | 
|  | MB_MODE_INFO *mbmi = xd->mi[0]; | 
|  | mbmi->skip_txfm = 1; | 
|  | if (x->txfm_search_info.skip_txfm) return; | 
|  |  | 
|  | struct optimize_ctx ctx; | 
|  | struct encode_b_args arg = { | 
|  | cpi,  x,    &ctx,    &mbmi->skip_txfm, | 
|  | NULL, NULL, dry_run, cpi->optimize_seg_arr[mbmi->segment_id] | 
|  | }; | 
|  | const AV1_COMMON *const cm = &cpi->common; | 
|  | const int num_planes = av1_num_planes(cm); | 
|  | for (int plane = 0; plane < num_planes; ++plane) { | 
|  | const struct macroblockd_plane *const pd = &xd->plane[plane]; | 
|  | const int subsampling_x = pd->subsampling_x; | 
|  | const int subsampling_y = pd->subsampling_y; | 
|  | if (plane && !xd->is_chroma_ref) break; | 
|  | const BLOCK_SIZE plane_bsize = | 
|  | get_plane_block_size(bsize, subsampling_x, subsampling_y); | 
|  | assert(plane_bsize < BLOCK_SIZES_ALL); | 
|  | const int mi_width = mi_size_wide[plane_bsize]; | 
|  | const int mi_height = mi_size_high[plane_bsize]; | 
|  | const TX_SIZE max_tx_size = get_vartx_max_txsize(xd, plane_bsize, plane); | 
|  | const BLOCK_SIZE txb_size = txsize_to_bsize[max_tx_size]; | 
|  | const int bw = mi_size_wide[txb_size]; | 
|  | const int bh = mi_size_high[txb_size]; | 
|  | int block = 0; | 
|  | const int step = | 
|  | tx_size_wide_unit[max_tx_size] * tx_size_high_unit[max_tx_size]; | 
|  | av1_get_entropy_contexts(plane_bsize, pd, ctx.ta[plane], ctx.tl[plane]); | 
|  | av1_subtract_plane(x, plane_bsize, plane); | 
|  | arg.ta = ctx.ta[plane]; | 
|  | arg.tl = ctx.tl[plane]; | 
|  | const BLOCK_SIZE max_unit_bsize = | 
|  | get_plane_block_size(BLOCK_64X64, subsampling_x, subsampling_y); | 
|  | int mu_blocks_wide = mi_size_wide[max_unit_bsize]; | 
|  | int mu_blocks_high = mi_size_high[max_unit_bsize]; | 
|  | mu_blocks_wide = AOMMIN(mi_width, mu_blocks_wide); | 
|  | mu_blocks_high = AOMMIN(mi_height, mu_blocks_high); | 
|  |  | 
|  | for (int idy = 0; idy < mi_height; idy += mu_blocks_high) { | 
|  | for (int idx = 0; idx < mi_width; idx += mu_blocks_wide) { | 
|  | int blk_row, blk_col; | 
|  | const int unit_height = AOMMIN(mu_blocks_high + idy, mi_height); | 
|  | const int unit_width = AOMMIN(mu_blocks_wide + idx, mi_width); | 
|  | for (blk_row = idy; blk_row < unit_height; blk_row += bh) { | 
|  | for (blk_col = idx; blk_col < unit_width; blk_col += bw) { | 
|  | encode_block_inter(plane, block, blk_row, blk_col, plane_bsize, | 
|  | max_tx_size, &arg, dry_run); | 
|  | block += step; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void encode_block_intra_and_set_context(int plane, int block, | 
|  | int blk_row, int blk_col, | 
|  | BLOCK_SIZE plane_bsize, | 
|  | TX_SIZE tx_size, void *arg) { | 
|  | av1_encode_block_intra(plane, block, blk_row, blk_col, plane_bsize, tx_size, | 
|  | arg); | 
|  |  | 
|  | struct encode_b_args *const args = arg; | 
|  | MACROBLOCK *x = args->x; | 
|  | ENTROPY_CONTEXT *a = &args->ta[blk_col]; | 
|  | ENTROPY_CONTEXT *l = &args->tl[blk_row]; | 
|  | av1_set_txb_context(x, plane, block, tx_size, a, l); | 
|  | } | 
|  |  | 
|  | void av1_encode_block_intra(int plane, int block, int blk_row, int blk_col, | 
|  | BLOCK_SIZE plane_bsize, TX_SIZE tx_size, | 
|  | void *arg) { | 
|  | struct encode_b_args *const args = arg; | 
|  | const AV1_COMP *const cpi = args->cpi; | 
|  | const AV1_COMMON *const cm = &cpi->common; | 
|  | MACROBLOCK *const x = args->x; | 
|  | MACROBLOCKD *const xd = &x->e_mbd; | 
|  | struct macroblock_plane *const p = &x->plane[plane]; | 
|  | struct macroblockd_plane *const pd = &xd->plane[plane]; | 
|  | tran_low_t *dqcoeff = p->dqcoeff + BLOCK_OFFSET(block); | 
|  | PLANE_TYPE plane_type = get_plane_type(plane); | 
|  | uint16_t *eob = &p->eobs[block]; | 
|  | const int dst_stride = pd->dst.stride; | 
|  | uint8_t *dst = &pd->dst.buf[(blk_row * dst_stride + blk_col) << MI_SIZE_LOG2]; | 
|  | int dummy_rate_cost = 0; | 
|  |  | 
|  | av1_predict_intra_block_facade(cm, xd, plane, blk_col, blk_row, tx_size); | 
|  |  | 
|  | TX_TYPE tx_type = DCT_DCT; | 
|  | const int bw = mi_size_wide[plane_bsize]; | 
|  | if (plane == 0 && is_blk_skip(x->txfm_search_info.blk_skip, plane, | 
|  | blk_row * bw + blk_col)) { | 
|  | *eob = 0; | 
|  | p->txb_entropy_ctx[block] = 0; | 
|  | } else { | 
|  | av1_subtract_txb(x, plane, plane_bsize, blk_col, blk_row, tx_size); | 
|  |  | 
|  | const ENTROPY_CONTEXT *a = &args->ta[blk_col]; | 
|  | const ENTROPY_CONTEXT *l = &args->tl[blk_row]; | 
|  | tx_type = av1_get_tx_type(xd, plane_type, blk_row, blk_col, tx_size, | 
|  | cm->features.reduced_tx_set_used); | 
|  | TxfmParam txfm_param; | 
|  | QUANT_PARAM quant_param; | 
|  | const int use_trellis = | 
|  | is_trellis_used(args->enable_optimize_b, args->dry_run); | 
|  | int quant_idx; | 
|  | if (use_trellis) | 
|  | quant_idx = AV1_XFORM_QUANT_FP; | 
|  | else | 
|  | quant_idx = | 
|  | USE_B_QUANT_NO_TRELLIS ? AV1_XFORM_QUANT_B : AV1_XFORM_QUANT_FP; | 
|  |  | 
|  | av1_setup_xform(cm, x, tx_size, tx_type, &txfm_param); | 
|  | av1_setup_quant(tx_size, use_trellis, quant_idx, | 
|  | cpi->oxcf.q_cfg.quant_b_adapt, &quant_param); | 
|  | av1_setup_qmatrix(&cm->quant_params, xd, plane, tx_size, tx_type, | 
|  | &quant_param); | 
|  |  | 
|  | av1_xform_quant(x, plane, block, blk_row, blk_col, plane_bsize, &txfm_param, | 
|  | &quant_param); | 
|  |  | 
|  | // Whether trellis or dropout optimization is required for key frames and | 
|  | // intra frames. | 
|  | const bool do_trellis = (frame_is_intra_only(cm) && | 
|  | (KEY_BLOCK_OPT_TYPE == TRELLIS_OPT || | 
|  | KEY_BLOCK_OPT_TYPE == TRELLIS_DROPOUT_OPT)) || | 
|  | (!frame_is_intra_only(cm) && | 
|  | (INTRA_BLOCK_OPT_TYPE == TRELLIS_OPT || | 
|  | INTRA_BLOCK_OPT_TYPE == TRELLIS_DROPOUT_OPT)); | 
|  | const bool do_dropout = (frame_is_intra_only(cm) && | 
|  | (KEY_BLOCK_OPT_TYPE == DROPOUT_OPT || | 
|  | KEY_BLOCK_OPT_TYPE == TRELLIS_DROPOUT_OPT)) || | 
|  | (!frame_is_intra_only(cm) && | 
|  | (INTRA_BLOCK_OPT_TYPE == DROPOUT_OPT || | 
|  | INTRA_BLOCK_OPT_TYPE == TRELLIS_DROPOUT_OPT)); | 
|  |  | 
|  | if (quant_param.use_optimize_b && do_trellis) { | 
|  | TXB_CTX txb_ctx; | 
|  | get_txb_ctx(plane_bsize, tx_size, plane, a, l, &txb_ctx); | 
|  | av1_optimize_b(args->cpi, x, plane, block, tx_size, tx_type, &txb_ctx, | 
|  | &dummy_rate_cost); | 
|  | } | 
|  | if (do_dropout) { | 
|  | av1_dropout_qcoeff(x, plane, block, tx_size, tx_type, | 
|  | cm->quant_params.base_qindex); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (*eob) { | 
|  | av1_inverse_transform_block(xd, dqcoeff, plane, tx_type, tx_size, dst, | 
|  | dst_stride, *eob, | 
|  | cm->features.reduced_tx_set_used); | 
|  | } | 
|  |  | 
|  | // TODO(jingning): Temporarily disable txk_type check for eob=0 case. | 
|  | // It is possible that certain collision in hash index would cause | 
|  | // the assertion failure. To further optimize the rate-distortion | 
|  | // performance, we need to re-visit this part and enable this assert | 
|  | // again. | 
|  | if (*eob == 0 && plane == 0) { | 
|  | #if 0 | 
|  | if (args->cpi->oxcf.q_cfg.aq_mode == NO_AQ | 
|  | && args->cpi->oxcf.q_cfg.deltaq_mode == NO_DELTA_Q) { | 
|  | assert(xd->tx_type_map[blk_row * xd->tx_type_map_stride + blk_col)] == | 
|  | DCT_DCT); | 
|  | } | 
|  | #endif | 
|  | update_txk_array(xd, blk_row, blk_col, tx_size, DCT_DCT); | 
|  | } | 
|  |  | 
|  | // For intra mode, skipped blocks are so rare that transmitting skip=1 is | 
|  | // very expensive. | 
|  | *(args->skip) = 0; | 
|  |  | 
|  | if (plane == AOM_PLANE_Y && xd->cfl.store_y) { | 
|  | cfl_store_tx(xd, blk_row, blk_col, tx_size, plane_bsize); | 
|  | } | 
|  | } | 
|  |  | 
|  | void av1_encode_intra_block_plane(const struct AV1_COMP *cpi, MACROBLOCK *x, | 
|  | BLOCK_SIZE bsize, int plane, RUN_TYPE dry_run, | 
|  | TRELLIS_OPT_TYPE enable_optimize_b) { | 
|  | assert(bsize < BLOCK_SIZES_ALL); | 
|  | const MACROBLOCKD *const xd = &x->e_mbd; | 
|  | if (plane && !xd->is_chroma_ref) return; | 
|  |  | 
|  | const struct macroblockd_plane *const pd = &xd->plane[plane]; | 
|  | const int ss_x = pd->subsampling_x; | 
|  | const int ss_y = pd->subsampling_y; | 
|  | ENTROPY_CONTEXT ta[MAX_MIB_SIZE] = { 0 }; | 
|  | ENTROPY_CONTEXT tl[MAX_MIB_SIZE] = { 0 }; | 
|  | struct encode_b_args arg = { cpi, x,  NULL,    &(xd->mi[0]->skip_txfm), | 
|  | ta,  tl, dry_run, enable_optimize_b }; | 
|  | const BLOCK_SIZE plane_bsize = get_plane_block_size(bsize, ss_x, ss_y); | 
|  | if (enable_optimize_b) { | 
|  | av1_get_entropy_contexts(plane_bsize, pd, ta, tl); | 
|  | } | 
|  | av1_foreach_transformed_block_in_plane( | 
|  | xd, plane_bsize, plane, encode_block_intra_and_set_context, &arg); | 
|  | } |