| /* | |
| * Copyright (c) 2016, Alliance for Open Media. All rights reserved | |
| * | |
| * This source code is subject to the terms of the BSD 2 Clause License and | |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License | |
| * was not distributed with this source code in the LICENSE file, you can | |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open | |
| * Media Patent License 1.0 was not distributed with this source code in the | |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. | |
| */ | |
| #include <limits.h> | |
| #include <math.h> | |
| #include <stdio.h> | |
| #include "config/aom_dsp_rtcd.h" | |
| #include "config/aom_scale_rtcd.h" | |
| #include "aom_dsp/aom_dsp_common.h" | |
| #include "aom_mem/aom_mem.h" | |
| #include "aom_ports/mem.h" | |
| #include "aom_ports/system_state.h" | |
| #include "aom_scale/aom_scale.h" | |
| #include "aom_scale/yv12config.h" | |
| #include "aom_dsp/variance.h" | |
| #include "av1/common/entropymv.h" | |
| #include "av1/common/quant_common.h" | |
| #include "av1/common/reconinter.h" // av1_setup_dst_planes() | |
| #include "av1/common/txb_common.h" | |
| #include "av1/encoder/aq_variance.h" | |
| #include "av1/encoder/av1_quantize.h" | |
| #include "av1/encoder/block.h" | |
| #include "av1/encoder/dwt.h" | |
| #include "av1/encoder/encodeframe.h" | |
| #include "av1/encoder/encodemb.h" | |
| #include "av1/encoder/encodemv.h" | |
| #include "av1/encoder/encoder.h" | |
| #include "av1/encoder/encode_strategy.h" | |
| #include "av1/encoder/extend.h" | |
| #include "av1/encoder/firstpass.h" | |
| #include "av1/encoder/mcomp.h" | |
| #include "av1/encoder/rd.h" | |
| #include "av1/encoder/reconinter_enc.h" | |
| #define OUTPUT_FPF 0 | |
| #define FIRST_PASS_Q 10.0 | |
| #define INTRA_MODE_PENALTY 1024 | |
| #define NEW_MV_MODE_PENALTY 32 | |
| #define DARK_THRESH 64 | |
| #define NCOUNT_INTRA_THRESH 8192 | |
| #define NCOUNT_INTRA_FACTOR 3 | |
| static void output_stats(FIRSTPASS_STATS *stats, | |
| struct aom_codec_pkt_list *pktlist) { | |
| struct aom_codec_cx_pkt pkt; | |
| pkt.kind = AOM_CODEC_STATS_PKT; | |
| pkt.data.twopass_stats.buf = stats; | |
| pkt.data.twopass_stats.sz = sizeof(FIRSTPASS_STATS); | |
| aom_codec_pkt_list_add(pktlist, &pkt); | |
| // TEMP debug code | |
| #if OUTPUT_FPF | |
| { | |
| FILE *fpfile; | |
| fpfile = fopen("firstpass.stt", "a"); | |
| fprintf(fpfile, | |
| "%12.0lf %12.4lf %12.0lf %12.0lf %12.0lf %12.4lf %12.4lf" | |
| "%12.4lf %12.4lf %12.4lf %12.4lf %12.4lf %12.4lf %12.4lf %12.4lf" | |
| "%12.4lf %12.4lf %12.0lf %12.0lf %12.0lf %12.4lf %12.4lf\n", | |
| stats->frame, stats->weight, stats->intra_error, stats->coded_error, | |
| stats->sr_coded_error, stats->pcnt_inter, stats->pcnt_motion, | |
| stats->pcnt_second_ref, stats->pcnt_neutral, stats->intra_skip_pct, | |
| stats->inactive_zone_rows, stats->inactive_zone_cols, stats->MVr, | |
| stats->mvr_abs, stats->MVc, stats->mvc_abs, stats->MVrv, | |
| stats->MVcv, stats->mv_in_out_count, stats->new_mv_count, | |
| stats->count, stats->duration); | |
| fclose(fpfile); | |
| } | |
| #endif | |
| } | |
| #if CONFIG_FP_MB_STATS | |
| static void output_fpmb_stats(uint8_t *this_frame_mb_stats, int stats_size, | |
| struct aom_codec_pkt_list *pktlist) { | |
| struct aom_codec_cx_pkt pkt; | |
| pkt.kind = AOM_CODEC_FPMB_STATS_PKT; | |
| pkt.data.firstpass_mb_stats.buf = this_frame_mb_stats; | |
| pkt.data.firstpass_mb_stats.sz = stats_size * sizeof(*this_frame_mb_stats); | |
| aom_codec_pkt_list_add(pktlist, &pkt); | |
| } | |
| #endif | |
| void av1_twopass_zero_stats(FIRSTPASS_STATS *section) { | |
| section->frame = 0.0; | |
| section->weight = 0.0; | |
| section->intra_error = 0.0; | |
| section->frame_avg_wavelet_energy = 0.0; | |
| section->coded_error = 0.0; | |
| section->sr_coded_error = 0.0; | |
| section->pcnt_inter = 0.0; | |
| section->pcnt_motion = 0.0; | |
| section->pcnt_second_ref = 0.0; | |
| section->pcnt_neutral = 0.0; | |
| section->intra_skip_pct = 0.0; | |
| section->inactive_zone_rows = 0.0; | |
| section->inactive_zone_cols = 0.0; | |
| section->MVr = 0.0; | |
| section->mvr_abs = 0.0; | |
| section->MVc = 0.0; | |
| section->mvc_abs = 0.0; | |
| section->MVrv = 0.0; | |
| section->MVcv = 0.0; | |
| section->mv_in_out_count = 0.0; | |
| section->new_mv_count = 0.0; | |
| section->count = 0.0; | |
| section->duration = 1.0; | |
| } | |
| static void accumulate_stats(FIRSTPASS_STATS *section, | |
| const FIRSTPASS_STATS *frame) { | |
| section->frame += frame->frame; | |
| section->weight += frame->weight; | |
| section->intra_error += frame->intra_error; | |
| section->frame_avg_wavelet_energy += frame->frame_avg_wavelet_energy; | |
| section->coded_error += frame->coded_error; | |
| section->sr_coded_error += frame->sr_coded_error; | |
| section->pcnt_inter += frame->pcnt_inter; | |
| section->pcnt_motion += frame->pcnt_motion; | |
| section->pcnt_second_ref += frame->pcnt_second_ref; | |
| section->pcnt_neutral += frame->pcnt_neutral; | |
| section->intra_skip_pct += frame->intra_skip_pct; | |
| section->inactive_zone_rows += frame->inactive_zone_rows; | |
| section->inactive_zone_cols += frame->inactive_zone_cols; | |
| section->MVr += frame->MVr; | |
| section->mvr_abs += frame->mvr_abs; | |
| section->MVc += frame->MVc; | |
| section->mvc_abs += frame->mvc_abs; | |
| section->MVrv += frame->MVrv; | |
| section->MVcv += frame->MVcv; | |
| section->mv_in_out_count += frame->mv_in_out_count; | |
| section->new_mv_count += frame->new_mv_count; | |
| section->count += frame->count; | |
| section->duration += frame->duration; | |
| } | |
| void av1_init_first_pass(AV1_COMP *cpi) { | |
| av1_twopass_zero_stats(&cpi->twopass.total_stats); | |
| } | |
| void av1_end_first_pass(AV1_COMP *cpi) { | |
| output_stats(&cpi->twopass.total_stats, cpi->output_pkt_list); | |
| } | |
| static aom_variance_fn_t get_block_variance_fn(BLOCK_SIZE bsize) { | |
| switch (bsize) { | |
| case BLOCK_8X8: return aom_mse8x8; | |
| case BLOCK_16X8: return aom_mse16x8; | |
| case BLOCK_8X16: return aom_mse8x16; | |
| default: return aom_mse16x16; | |
| } | |
| } | |
| static unsigned int get_prediction_error(BLOCK_SIZE bsize, | |
| const struct buf_2d *src, | |
| const struct buf_2d *ref) { | |
| unsigned int sse; | |
| const aom_variance_fn_t fn = get_block_variance_fn(bsize); | |
| fn(src->buf, src->stride, ref->buf, ref->stride, &sse); | |
| return sse; | |
| } | |
| static aom_variance_fn_t highbd_get_block_variance_fn(BLOCK_SIZE bsize, | |
| int bd) { | |
| switch (bd) { | |
| default: | |
| switch (bsize) { | |
| case BLOCK_8X8: return aom_highbd_8_mse8x8; | |
| case BLOCK_16X8: return aom_highbd_8_mse16x8; | |
| case BLOCK_8X16: return aom_highbd_8_mse8x16; | |
| default: return aom_highbd_8_mse16x16; | |
| } | |
| break; | |
| case 10: | |
| switch (bsize) { | |
| case BLOCK_8X8: return aom_highbd_10_mse8x8; | |
| case BLOCK_16X8: return aom_highbd_10_mse16x8; | |
| case BLOCK_8X16: return aom_highbd_10_mse8x16; | |
| default: return aom_highbd_10_mse16x16; | |
| } | |
| break; | |
| case 12: | |
| switch (bsize) { | |
| case BLOCK_8X8: return aom_highbd_12_mse8x8; | |
| case BLOCK_16X8: return aom_highbd_12_mse16x8; | |
| case BLOCK_8X16: return aom_highbd_12_mse8x16; | |
| default: return aom_highbd_12_mse16x16; | |
| } | |
| break; | |
| } | |
| } | |
| static unsigned int highbd_get_prediction_error(BLOCK_SIZE bsize, | |
| const struct buf_2d *src, | |
| const struct buf_2d *ref, | |
| int bd) { | |
| unsigned int sse; | |
| const aom_variance_fn_t fn = highbd_get_block_variance_fn(bsize, bd); | |
| fn(src->buf, src->stride, ref->buf, ref->stride, &sse); | |
| return sse; | |
| } | |
| // Refine the motion search range according to the frame dimension | |
| // for first pass test. | |
| static int get_search_range(const AV1_COMP *cpi) { | |
| int sr = 0; | |
| const int dim = AOMMIN(cpi->initial_width, cpi->initial_height); | |
| while ((dim << sr) < MAX_FULL_PEL_VAL) ++sr; | |
| return sr; | |
| } | |
| static void first_pass_motion_search(AV1_COMP *cpi, MACROBLOCK *x, | |
| const MV *ref_mv, MV *best_mv, | |
| int *best_motion_err) { | |
| MACROBLOCKD *const xd = &x->e_mbd; | |
| MV tmp_mv = kZeroMv; | |
| MV ref_mv_full = { ref_mv->row >> 3, ref_mv->col >> 3 }; | |
| int num00, tmp_err, n; | |
| const BLOCK_SIZE bsize = xd->mi[0]->sb_type; | |
| aom_variance_fn_ptr_t v_fn_ptr = cpi->fn_ptr[bsize]; | |
| const int new_mv_mode_penalty = NEW_MV_MODE_PENALTY; | |
| int step_param = 3; | |
| int further_steps = (MAX_MVSEARCH_STEPS - 1) - step_param; | |
| const int sr = get_search_range(cpi); | |
| step_param += sr; | |
| further_steps -= sr; | |
| // Override the default variance function to use MSE. | |
| v_fn_ptr.vf = get_block_variance_fn(bsize); | |
| if (is_cur_buf_hbd(xd)) { | |
| v_fn_ptr.vf = highbd_get_block_variance_fn(bsize, xd->bd); | |
| } | |
| // Center the initial step/diamond search on best mv. | |
| tmp_err = cpi->diamond_search_sad(x, &cpi->ss_cfg[SS_CFG_SRC], &ref_mv_full, | |
| &tmp_mv, step_param, x->sadperbit16, &num00, | |
| &v_fn_ptr, ref_mv); | |
| if (tmp_err < INT_MAX) | |
| tmp_err = av1_get_mvpred_var(x, &tmp_mv, ref_mv, &v_fn_ptr, 1); | |
| if (tmp_err < INT_MAX - new_mv_mode_penalty) tmp_err += new_mv_mode_penalty; | |
| if (tmp_err < *best_motion_err) { | |
| *best_motion_err = tmp_err; | |
| *best_mv = tmp_mv; | |
| } | |
| // Carry out further step/diamond searches as necessary. | |
| n = num00; | |
| num00 = 0; | |
| while (n < further_steps) { | |
| ++n; | |
| if (num00) { | |
| --num00; | |
| } else { | |
| tmp_err = cpi->diamond_search_sad( | |
| x, &cpi->ss_cfg[SS_CFG_SRC], &ref_mv_full, &tmp_mv, step_param + n, | |
| x->sadperbit16, &num00, &v_fn_ptr, ref_mv); | |
| if (tmp_err < INT_MAX) | |
| tmp_err = av1_get_mvpred_var(x, &tmp_mv, ref_mv, &v_fn_ptr, 1); | |
| if (tmp_err < INT_MAX - new_mv_mode_penalty) | |
| tmp_err += new_mv_mode_penalty; | |
| if (tmp_err < *best_motion_err) { | |
| *best_motion_err = tmp_err; | |
| *best_mv = tmp_mv; | |
| } | |
| } | |
| } | |
| } | |
| static BLOCK_SIZE get_bsize(const AV1_COMMON *cm, int mb_row, int mb_col) { | |
| if (mi_size_wide[BLOCK_16X16] * mb_col + mi_size_wide[BLOCK_8X8] < | |
| cm->mi_cols) { | |
| return mi_size_wide[BLOCK_16X16] * mb_row + mi_size_wide[BLOCK_8X8] < | |
| cm->mi_rows | |
| ? BLOCK_16X16 | |
| : BLOCK_16X8; | |
| } else { | |
| return mi_size_wide[BLOCK_16X16] * mb_row + mi_size_wide[BLOCK_8X8] < | |
| cm->mi_rows | |
| ? BLOCK_8X16 | |
| : BLOCK_8X8; | |
| } | |
| } | |
| static int find_fp_qindex(aom_bit_depth_t bit_depth) { | |
| return av1_find_qindex(FIRST_PASS_Q, bit_depth, 0, QINDEX_RANGE - 1); | |
| } | |
| static double raw_motion_error_stdev(int *raw_motion_err_list, | |
| int raw_motion_err_counts) { | |
| int64_t sum_raw_err = 0; | |
| double raw_err_avg = 0; | |
| double raw_err_stdev = 0; | |
| if (raw_motion_err_counts == 0) return 0; | |
| int i; | |
| for (i = 0; i < raw_motion_err_counts; i++) { | |
| sum_raw_err += raw_motion_err_list[i]; | |
| } | |
| raw_err_avg = (double)sum_raw_err / raw_motion_err_counts; | |
| for (i = 0; i < raw_motion_err_counts; i++) { | |
| raw_err_stdev += (raw_motion_err_list[i] - raw_err_avg) * | |
| (raw_motion_err_list[i] - raw_err_avg); | |
| } | |
| // Calculate the standard deviation for the motion error of all the inter | |
| // blocks of the 0,0 motion using the last source | |
| // frame as the reference. | |
| raw_err_stdev = sqrt(raw_err_stdev / raw_motion_err_counts); | |
| return raw_err_stdev; | |
| } | |
| #define UL_INTRA_THRESH 50 | |
| #define INVALID_ROW -1 | |
| void av1_first_pass(AV1_COMP *cpi, const int64_t ts_duration) { | |
| int mb_row, mb_col; | |
| MACROBLOCK *const x = &cpi->td.mb; | |
| AV1_COMMON *const cm = &cpi->common; | |
| CurrentFrame *const current_frame = &cm->current_frame; | |
| const SequenceHeader *const seq_params = &cm->seq_params; | |
| const int num_planes = av1_num_planes(cm); | |
| MACROBLOCKD *const xd = &x->e_mbd; | |
| TileInfo tile; | |
| struct macroblock_plane *const p = x->plane; | |
| struct macroblockd_plane *const pd = xd->plane; | |
| const PICK_MODE_CONTEXT *ctx = | |
| &cpi->td.pc_root[MAX_MIB_SIZE_LOG2 - MIN_MIB_SIZE_LOG2]->none; | |
| int i; | |
| int recon_yoffset, src_yoffset, recon_uvoffset; | |
| int64_t intra_error = 0; | |
| int64_t frame_avg_wavelet_energy = 0; | |
| int64_t coded_error = 0; | |
| int64_t sr_coded_error = 0; | |
| int sum_mvr = 0, sum_mvc = 0; | |
| int sum_mvr_abs = 0, sum_mvc_abs = 0; | |
| int64_t sum_mvrs = 0, sum_mvcs = 0; | |
| int mvcount = 0; | |
| int intercount = 0; | |
| int second_ref_count = 0; | |
| const int intrapenalty = INTRA_MODE_PENALTY; | |
| double neutral_count; | |
| int intra_skip_count = 0; | |
| int image_data_start_row = INVALID_ROW; | |
| int new_mv_count = 0; | |
| int sum_in_vectors = 0; | |
| MV lastmv = kZeroMv; | |
| TWO_PASS *twopass = &cpi->twopass; | |
| int recon_y_stride, src_y_stride, recon_uv_stride, uv_mb_height; | |
| const YV12_BUFFER_CONFIG *const lst_yv12 = | |
| get_ref_frame_yv12_buf(cm, LAST_FRAME); | |
| const YV12_BUFFER_CONFIG *gld_yv12 = get_ref_frame_yv12_buf(cm, GOLDEN_FRAME); | |
| YV12_BUFFER_CONFIG *const new_yv12 = &cm->cur_frame->buf; | |
| const YV12_BUFFER_CONFIG *first_ref_buf = lst_yv12; | |
| double intra_factor; | |
| double brightness_factor; | |
| const int qindex = find_fp_qindex(seq_params->bit_depth); | |
| const int mb_scale = mi_size_wide[BLOCK_16X16]; | |
| int *raw_motion_err_list; | |
| int raw_motion_err_counts = 0; | |
| CHECK_MEM_ERROR( | |
| cm, raw_motion_err_list, | |
| aom_calloc(cm->mb_rows * cm->mb_cols, sizeof(*raw_motion_err_list))); | |
| // First pass code requires valid last and new frame buffers. | |
| assert(new_yv12 != NULL); | |
| assert(frame_is_intra_only(cm) || (lst_yv12 != NULL)); | |
| #if CONFIG_FP_MB_STATS | |
| if (cpi->use_fp_mb_stats) { | |
| av1_zero_array(cpi->twopass.frame_mb_stats_buf, cpi->initial_mbs); | |
| } | |
| #endif | |
| av1_setup_frame_size(cpi); | |
| aom_clear_system_state(); | |
| xd->mi = cm->mi_grid_visible; | |
| xd->mi[0] = cm->mi; | |
| x->e_mbd.mi[0]->sb_type = BLOCK_16X16; | |
| intra_factor = 0.0; | |
| brightness_factor = 0.0; | |
| neutral_count = 0.0; | |
| // Do not use periodic key frames. | |
| cpi->rc.frames_to_key = INT_MAX; | |
| av1_set_quantizer(cm, qindex); | |
| av1_setup_block_planes(&x->e_mbd, seq_params->subsampling_x, | |
| seq_params->subsampling_y, num_planes); | |
| av1_setup_src_planes(x, cpi->source, 0, 0, num_planes, | |
| x->e_mbd.mi[0]->sb_type); | |
| av1_setup_dst_planes(xd->plane, seq_params->sb_size, new_yv12, 0, 0, 0, | |
| num_planes); | |
| if (!frame_is_intra_only(cm)) { | |
| av1_setup_pre_planes(xd, 0, first_ref_buf, 0, 0, NULL, num_planes); | |
| } | |
| xd->mi = cm->mi_grid_visible; | |
| xd->mi[0] = cm->mi; | |
| // Don't store luma on the fist pass since chroma is not computed | |
| xd->cfl.store_y = 0; | |
| av1_frame_init_quantizer(cpi); | |
| for (i = 0; i < num_planes; ++i) { | |
| p[i].coeff = ctx->coeff[i]; | |
| p[i].qcoeff = ctx->qcoeff[i]; | |
| pd[i].dqcoeff = ctx->dqcoeff[i]; | |
| p[i].eobs = ctx->eobs[i]; | |
| p[i].txb_entropy_ctx = ctx->txb_entropy_ctx[i]; | |
| } | |
| av1_init_mv_probs(cm); | |
| av1_initialize_rd_consts(cpi); | |
| // Tiling is ignored in the first pass. | |
| av1_tile_init(&tile, cm, 0, 0); | |
| src_y_stride = cpi->source->y_stride; | |
| recon_y_stride = new_yv12->y_stride; | |
| recon_uv_stride = new_yv12->uv_stride; | |
| uv_mb_height = 16 >> (new_yv12->y_height > new_yv12->uv_height); | |
| for (mb_row = 0; mb_row < cm->mb_rows; ++mb_row) { | |
| MV best_ref_mv = kZeroMv; | |
| // Reset above block coeffs. | |
| xd->up_available = (mb_row != 0); | |
| recon_yoffset = (mb_row * recon_y_stride * 16); | |
| src_yoffset = (mb_row * src_y_stride * 16); | |
| recon_uvoffset = (mb_row * recon_uv_stride * uv_mb_height); | |
| // Set up limit values for motion vectors to prevent them extending | |
| // outside the UMV borders. | |
| x->mv_limits.row_min = -((mb_row * 16) + BORDER_MV_PIXELS_B16); | |
| x->mv_limits.row_max = | |
| ((cm->mb_rows - 1 - mb_row) * 16) + BORDER_MV_PIXELS_B16; | |
| for (mb_col = 0; mb_col < cm->mb_cols; ++mb_col) { | |
| int this_error; | |
| const int use_dc_pred = (mb_col || mb_row) && (!mb_col || !mb_row); | |
| const BLOCK_SIZE bsize = get_bsize(cm, mb_row, mb_col); | |
| double log_intra; | |
| int level_sample; | |
| #if CONFIG_FP_MB_STATS | |
| const int mb_index = mb_row * cm->mb_cols + mb_col; | |
| #endif | |
| aom_clear_system_state(); | |
| const int idx_str = xd->mi_stride * mb_row * mb_scale + mb_col * mb_scale; | |
| xd->mi = cm->mi_grid_visible + idx_str; | |
| xd->mi[0] = cm->mi + idx_str; | |
| xd->plane[0].dst.buf = new_yv12->y_buffer + recon_yoffset; | |
| xd->plane[1].dst.buf = new_yv12->u_buffer + recon_uvoffset; | |
| xd->plane[2].dst.buf = new_yv12->v_buffer + recon_uvoffset; | |
| xd->left_available = (mb_col != 0); | |
| xd->mi[0]->sb_type = bsize; | |
| xd->mi[0]->ref_frame[0] = INTRA_FRAME; | |
| set_mi_row_col(xd, &tile, mb_row * mb_scale, mi_size_high[bsize], | |
| mb_col * mb_scale, mi_size_wide[bsize], cm->mi_rows, | |
| cm->mi_cols); | |
| set_plane_n4(xd, mi_size_wide[bsize], mi_size_high[bsize], num_planes); | |
| // Do intra 16x16 prediction. | |
| xd->mi[0]->segment_id = 0; | |
| xd->lossless[xd->mi[0]->segment_id] = (qindex == 0); | |
| xd->mi[0]->mode = DC_PRED; | |
| xd->mi[0]->tx_size = | |
| use_dc_pred ? (bsize >= BLOCK_16X16 ? TX_16X16 : TX_8X8) : TX_4X4; | |
| av1_encode_intra_block_plane(cpi, x, bsize, 0, 0, mb_row * 2, mb_col * 2); | |
| this_error = aom_get_mb_ss(x->plane[0].src_diff); | |
| // Keep a record of blocks that have almost no intra error residual | |
| // (i.e. are in effect completely flat and untextured in the intra | |
| // domain). In natural videos this is uncommon, but it is much more | |
| // common in animations, graphics and screen content, so may be used | |
| // as a signal to detect these types of content. | |
| if (this_error < UL_INTRA_THRESH) { | |
| ++intra_skip_count; | |
| } else if ((mb_col > 0) && (image_data_start_row == INVALID_ROW)) { | |
| image_data_start_row = mb_row; | |
| } | |
| if (seq_params->use_highbitdepth) { | |
| switch (seq_params->bit_depth) { | |
| case AOM_BITS_8: break; | |
| case AOM_BITS_10: this_error >>= 4; break; | |
| case AOM_BITS_12: this_error >>= 8; break; | |
| default: | |
| assert(0 && | |
| "seq_params->bit_depth should be AOM_BITS_8, " | |
| "AOM_BITS_10 or AOM_BITS_12"); | |
| return; | |
| } | |
| } | |
| aom_clear_system_state(); | |
| log_intra = log(this_error + 1.0); | |
| if (log_intra < 10.0) | |
| intra_factor += 1.0 + ((10.0 - log_intra) * 0.05); | |
| else | |
| intra_factor += 1.0; | |
| if (seq_params->use_highbitdepth) | |
| level_sample = CONVERT_TO_SHORTPTR(x->plane[0].src.buf)[0]; | |
| else | |
| level_sample = x->plane[0].src.buf[0]; | |
| if ((level_sample < DARK_THRESH) && (log_intra < 9.0)) | |
| brightness_factor += 1.0 + (0.01 * (DARK_THRESH - level_sample)); | |
| else | |
| brightness_factor += 1.0; | |
| // Intrapenalty below deals with situations where the intra and inter | |
| // error scores are very low (e.g. a plain black frame). | |
| // We do not have special cases in first pass for 0,0 and nearest etc so | |
| // all inter modes carry an overhead cost estimate for the mv. | |
| // When the error score is very low this causes us to pick all or lots of | |
| // INTRA modes and throw lots of key frames. | |
| // This penalty adds a cost matching that of a 0,0 mv to the intra case. | |
| this_error += intrapenalty; | |
| // Accumulate the intra error. | |
| intra_error += (int64_t)this_error; | |
| const int hbd = is_cur_buf_hbd(xd); | |
| const int stride = x->plane[0].src.stride; | |
| uint8_t *buf = x->plane[0].src.buf; | |
| for (int r8 = 0; r8 < 2; ++r8) { | |
| for (int c8 = 0; c8 < 2; ++c8) { | |
| frame_avg_wavelet_energy += av1_haar_ac_sad_8x8_uint8_input( | |
| buf + c8 * 8 + r8 * 8 * stride, stride, hbd); | |
| } | |
| } | |
| #if CONFIG_FP_MB_STATS | |
| if (cpi->use_fp_mb_stats) { | |
| // initialization | |
| cpi->twopass.frame_mb_stats_buf[mb_index] = 0; | |
| } | |
| #endif | |
| // Set up limit values for motion vectors to prevent them extending | |
| // outside the UMV borders. | |
| x->mv_limits.col_min = -((mb_col * 16) + BORDER_MV_PIXELS_B16); | |
| x->mv_limits.col_max = | |
| ((cm->mb_cols - 1 - mb_col) * 16) + BORDER_MV_PIXELS_B16; | |
| if (!frame_is_intra_only(cm)) { // Do a motion search | |
| int tmp_err, motion_error, raw_motion_error; | |
| // Assume 0,0 motion with no mv overhead. | |
| MV mv = kZeroMv, tmp_mv = kZeroMv; | |
| struct buf_2d unscaled_last_source_buf_2d; | |
| xd->plane[0].pre[0].buf = first_ref_buf->y_buffer + recon_yoffset; | |
| if (is_cur_buf_hbd(xd)) { | |
| motion_error = highbd_get_prediction_error( | |
| bsize, &x->plane[0].src, &xd->plane[0].pre[0], xd->bd); | |
| } else { | |
| motion_error = get_prediction_error(bsize, &x->plane[0].src, | |
| &xd->plane[0].pre[0]); | |
| } | |
| // Compute the motion error of the 0,0 motion using the last source | |
| // frame as the reference. Skip the further motion search on | |
| // reconstructed frame if this error is small. | |
| unscaled_last_source_buf_2d.buf = | |
| cpi->unscaled_last_source->y_buffer + src_yoffset; | |
| unscaled_last_source_buf_2d.stride = | |
| cpi->unscaled_last_source->y_stride; | |
| if (is_cur_buf_hbd(xd)) { | |
| raw_motion_error = highbd_get_prediction_error( | |
| bsize, &x->plane[0].src, &unscaled_last_source_buf_2d, xd->bd); | |
| } else { | |
| raw_motion_error = get_prediction_error(bsize, &x->plane[0].src, | |
| &unscaled_last_source_buf_2d); | |
| } | |
| // TODO(pengchong): Replace the hard-coded threshold | |
| if (raw_motion_error > 25) { | |
| // Test last reference frame using the previous best mv as the | |
| // starting point (best reference) for the search. | |
| first_pass_motion_search(cpi, x, &best_ref_mv, &mv, &motion_error); | |
| // If the current best reference mv is not centered on 0,0 then do a | |
| // 0,0 based search as well. | |
| if (!is_zero_mv(&best_ref_mv)) { | |
| tmp_err = INT_MAX; | |
| first_pass_motion_search(cpi, x, &kZeroMv, &tmp_mv, &tmp_err); | |
| if (tmp_err < motion_error) { | |
| motion_error = tmp_err; | |
| mv = tmp_mv; | |
| } | |
| } | |
| // Search in an older reference frame. | |
| if ((current_frame->frame_number > 1) && gld_yv12 != NULL) { | |
| // Assume 0,0 motion with no mv overhead. | |
| int gf_motion_error; | |
| xd->plane[0].pre[0].buf = gld_yv12->y_buffer + recon_yoffset; | |
| if (is_cur_buf_hbd(xd)) { | |
| gf_motion_error = highbd_get_prediction_error( | |
| bsize, &x->plane[0].src, &xd->plane[0].pre[0], xd->bd); | |
| } else { | |
| gf_motion_error = get_prediction_error(bsize, &x->plane[0].src, | |
| &xd->plane[0].pre[0]); | |
| } | |
| first_pass_motion_search(cpi, x, &kZeroMv, &tmp_mv, | |
| &gf_motion_error); | |
| if (gf_motion_error < motion_error && gf_motion_error < this_error) | |
| ++second_ref_count; | |
| // Reset to last frame as reference buffer. | |
| xd->plane[0].pre[0].buf = first_ref_buf->y_buffer + recon_yoffset; | |
| xd->plane[1].pre[0].buf = first_ref_buf->u_buffer + recon_uvoffset; | |
| xd->plane[2].pre[0].buf = first_ref_buf->v_buffer + recon_uvoffset; | |
| // In accumulating a score for the older reference frame take the | |
| // best of the motion predicted score and the intra coded error | |
| // (just as will be done for) accumulation of "coded_error" for | |
| // the last frame. | |
| if (gf_motion_error < this_error) | |
| sr_coded_error += gf_motion_error; | |
| else | |
| sr_coded_error += this_error; | |
| } else { | |
| sr_coded_error += motion_error; | |
| } | |
| } else { | |
| sr_coded_error += motion_error; | |
| } | |
| // Start by assuming that intra mode is best. | |
| best_ref_mv.row = 0; | |
| best_ref_mv.col = 0; | |
| #if CONFIG_FP_MB_STATS | |
| if (cpi->use_fp_mb_stats) { | |
| // intra predication statistics | |
| cpi->twopass.frame_mb_stats_buf[mb_index] = 0; | |
| cpi->twopass.frame_mb_stats_buf[mb_index] |= FPMB_DCINTRA_MASK; | |
| cpi->twopass.frame_mb_stats_buf[mb_index] |= FPMB_MOTION_ZERO_MASK; | |
| if (this_error > FPMB_ERROR_LARGE_TH) { | |
| cpi->twopass.frame_mb_stats_buf[mb_index] |= FPMB_ERROR_LARGE_MASK; | |
| } else if (this_error < FPMB_ERROR_SMALL_TH) { | |
| cpi->twopass.frame_mb_stats_buf[mb_index] |= FPMB_ERROR_SMALL_MASK; | |
| } | |
| } | |
| #endif | |
| if (motion_error <= this_error) { | |
| aom_clear_system_state(); | |
| // Keep a count of cases where the inter and intra were very close | |
| // and very low. This helps with scene cut detection for example in | |
| // cropped clips with black bars at the sides or top and bottom. | |
| if (((this_error - intrapenalty) * 9 <= motion_error * 10) && | |
| (this_error < (2 * intrapenalty))) { | |
| neutral_count += 1.0; | |
| // Also track cases where the intra is not much worse than the inter | |
| // and use this in limiting the GF/arf group length. | |
| } else if ((this_error > NCOUNT_INTRA_THRESH) && | |
| (this_error < (NCOUNT_INTRA_FACTOR * motion_error))) { | |
| neutral_count += | |
| (double)motion_error / DOUBLE_DIVIDE_CHECK((double)this_error); | |
| } | |
| mv.row *= 8; | |
| mv.col *= 8; | |
| this_error = motion_error; | |
| xd->mi[0]->mode = NEWMV; | |
| xd->mi[0]->mv[0].as_mv = mv; | |
| xd->mi[0]->tx_size = TX_4X4; | |
| xd->mi[0]->ref_frame[0] = LAST_FRAME; | |
| xd->mi[0]->ref_frame[1] = NONE_FRAME; | |
| av1_enc_build_inter_predictor(cm, xd, mb_row * mb_scale, | |
| mb_col * mb_scale, NULL, bsize, | |
| AOM_PLANE_Y, AOM_PLANE_Y); | |
| av1_encode_sby_pass1(cm, x, bsize); | |
| sum_mvr += mv.row; | |
| sum_mvr_abs += abs(mv.row); | |
| sum_mvc += mv.col; | |
| sum_mvc_abs += abs(mv.col); | |
| sum_mvrs += mv.row * mv.row; | |
| sum_mvcs += mv.col * mv.col; | |
| ++intercount; | |
| best_ref_mv = mv; | |
| #if CONFIG_FP_MB_STATS | |
| if (cpi->use_fp_mb_stats) { | |
| // inter predication statistics | |
| cpi->twopass.frame_mb_stats_buf[mb_index] = 0; | |
| cpi->twopass.frame_mb_stats_buf[mb_index] &= ~FPMB_DCINTRA_MASK; | |
| cpi->twopass.frame_mb_stats_buf[mb_index] |= FPMB_MOTION_ZERO_MASK; | |
| if (this_error > FPMB_ERROR_LARGE_TH) { | |
| cpi->twopass.frame_mb_stats_buf[mb_index] |= | |
| FPMB_ERROR_LARGE_MASK; | |
| } else if (this_error < FPMB_ERROR_SMALL_TH) { | |
| cpi->twopass.frame_mb_stats_buf[mb_index] |= | |
| FPMB_ERROR_SMALL_MASK; | |
| } | |
| } | |
| #endif | |
| if (!is_zero_mv(&mv)) { | |
| ++mvcount; | |
| #if CONFIG_FP_MB_STATS | |
| if (cpi->use_fp_mb_stats) { | |
| cpi->twopass.frame_mb_stats_buf[mb_index] &= | |
| ~FPMB_MOTION_ZERO_MASK; | |
| // check estimated motion direction | |
| if (mv.col > 0 && mv.col >= abs(mv.row)) { | |
| // right direction | |
| cpi->twopass.frame_mb_stats_buf[mb_index] |= | |
| FPMB_MOTION_RIGHT_MASK; | |
| } else if (mv.row < 0 && abs(mv.row) >= abs(mv.col)) { | |
| // up direction | |
| cpi->twopass.frame_mb_stats_buf[mb_index] |= | |
| FPMB_MOTION_UP_MASK; | |
| } else if (mv.col < 0 && abs(mv.col) >= abs(mv.row)) { | |
| // left direction | |
| cpi->twopass.frame_mb_stats_buf[mb_index] |= | |
| FPMB_MOTION_LEFT_MASK; | |
| } else { | |
| // down direction | |
| cpi->twopass.frame_mb_stats_buf[mb_index] |= | |
| FPMB_MOTION_DOWN_MASK; | |
| } | |
| } | |
| #endif | |
| // Non-zero vector, was it different from the last non zero vector? | |
| if (!is_equal_mv(&mv, &lastmv)) ++new_mv_count; | |
| lastmv = mv; | |
| // Does the row vector point inwards or outwards? | |
| if (mb_row < cm->mb_rows / 2) { | |
| if (mv.row > 0) | |
| --sum_in_vectors; | |
| else if (mv.row < 0) | |
| ++sum_in_vectors; | |
| } else if (mb_row > cm->mb_rows / 2) { | |
| if (mv.row > 0) | |
| ++sum_in_vectors; | |
| else if (mv.row < 0) | |
| --sum_in_vectors; | |
| } | |
| // Does the col vector point inwards or outwards? | |
| if (mb_col < cm->mb_cols / 2) { | |
| if (mv.col > 0) | |
| --sum_in_vectors; | |
| else if (mv.col < 0) | |
| ++sum_in_vectors; | |
| } else if (mb_col > cm->mb_cols / 2) { | |
| if (mv.col > 0) | |
| ++sum_in_vectors; | |
| else if (mv.col < 0) | |
| --sum_in_vectors; | |
| } | |
| } | |
| } | |
| raw_motion_err_list[raw_motion_err_counts++] = raw_motion_error; | |
| } else { | |
| sr_coded_error += (int64_t)this_error; | |
| } | |
| coded_error += (int64_t)this_error; | |
| // Adjust to the next column of MBs. | |
| x->plane[0].src.buf += 16; | |
| x->plane[1].src.buf += uv_mb_height; | |
| x->plane[2].src.buf += uv_mb_height; | |
| recon_yoffset += 16; | |
| src_yoffset += 16; | |
| recon_uvoffset += uv_mb_height; | |
| } | |
| // Adjust to the next row of MBs. | |
| x->plane[0].src.buf += 16 * x->plane[0].src.stride - 16 * cm->mb_cols; | |
| x->plane[1].src.buf += | |
| uv_mb_height * x->plane[1].src.stride - uv_mb_height * cm->mb_cols; | |
| x->plane[2].src.buf += | |
| uv_mb_height * x->plane[1].src.stride - uv_mb_height * cm->mb_cols; | |
| aom_clear_system_state(); | |
| } | |
| const double raw_err_stdev = | |
| raw_motion_error_stdev(raw_motion_err_list, raw_motion_err_counts); | |
| aom_free(raw_motion_err_list); | |
| // Clamp the image start to rows/2. This number of rows is discarded top | |
| // and bottom as dead data so rows / 2 means the frame is blank. | |
| if ((image_data_start_row > cm->mb_rows / 2) || | |
| (image_data_start_row == INVALID_ROW)) { | |
| image_data_start_row = cm->mb_rows / 2; | |
| } | |
| // Exclude any image dead zone | |
| if (image_data_start_row > 0) { | |
| intra_skip_count = | |
| AOMMAX(0, intra_skip_count - (image_data_start_row * cm->mb_cols * 2)); | |
| } | |
| { | |
| FIRSTPASS_STATS fps; | |
| // The minimum error here insures some bit allocation to frames even | |
| // in static regions. The allocation per MB declines for larger formats | |
| // where the typical "real" energy per MB also falls. | |
| // Initial estimate here uses sqrt(mbs) to define the min_err, where the | |
| // number of mbs is proportional to the image area. | |
| const int num_mbs = (cpi->oxcf.resize_mode != RESIZE_NONE) | |
| ? cpi->initial_mbs | |
| : cpi->common.MBs; | |
| const double min_err = 200 * sqrt(num_mbs); | |
| intra_factor = intra_factor / (double)num_mbs; | |
| brightness_factor = brightness_factor / (double)num_mbs; | |
| fps.weight = intra_factor * brightness_factor; | |
| fps.frame = current_frame->frame_number; | |
| fps.coded_error = (double)(coded_error >> 8) + min_err; | |
| fps.sr_coded_error = (double)(sr_coded_error >> 8) + min_err; | |
| fps.intra_error = (double)(intra_error >> 8) + min_err; | |
| fps.frame_avg_wavelet_energy = (double)frame_avg_wavelet_energy; | |
| fps.count = 1.0; | |
| fps.pcnt_inter = (double)intercount / num_mbs; | |
| fps.pcnt_second_ref = (double)second_ref_count / num_mbs; | |
| fps.pcnt_neutral = (double)neutral_count / num_mbs; | |
| fps.intra_skip_pct = (double)intra_skip_count / num_mbs; | |
| fps.inactive_zone_rows = (double)image_data_start_row; | |
| fps.inactive_zone_cols = (double)0; // TODO(paulwilkins): fix | |
| fps.raw_error_stdev = raw_err_stdev; | |
| if (mvcount > 0) { | |
| fps.MVr = (double)sum_mvr / mvcount; | |
| fps.mvr_abs = (double)sum_mvr_abs / mvcount; | |
| fps.MVc = (double)sum_mvc / mvcount; | |
| fps.mvc_abs = (double)sum_mvc_abs / mvcount; | |
| fps.MVrv = | |
| ((double)sum_mvrs - ((double)sum_mvr * sum_mvr / mvcount)) / mvcount; | |
| fps.MVcv = | |
| ((double)sum_mvcs - ((double)sum_mvc * sum_mvc / mvcount)) / mvcount; | |
| fps.mv_in_out_count = (double)sum_in_vectors / (mvcount * 2); | |
| fps.new_mv_count = new_mv_count; | |
| fps.pcnt_motion = (double)mvcount / num_mbs; | |
| } else { | |
| fps.MVr = 0.0; | |
| fps.mvr_abs = 0.0; | |
| fps.MVc = 0.0; | |
| fps.mvc_abs = 0.0; | |
| fps.MVrv = 0.0; | |
| fps.MVcv = 0.0; | |
| fps.mv_in_out_count = 0.0; | |
| fps.new_mv_count = 0.0; | |
| fps.pcnt_motion = 0.0; | |
| } | |
| // TODO(paulwilkins): Handle the case when duration is set to 0, or | |
| // something less than the full time between subsequent values of | |
| // cpi->source_time_stamp. | |
| fps.duration = (double)ts_duration; | |
| // Don't want to do output stats with a stack variable! | |
| twopass->this_frame_stats = fps; | |
| output_stats(&twopass->this_frame_stats, cpi->output_pkt_list); | |
| accumulate_stats(&twopass->total_stats, &fps); | |
| #if CONFIG_FP_MB_STATS | |
| if (cpi->use_fp_mb_stats) { | |
| output_fpmb_stats(twopass->frame_mb_stats_buf, cpi->initial_mbs, | |
| cpi->output_pkt_list); | |
| } | |
| #endif | |
| } | |
| // Copy the previous Last Frame back into gf and and arf buffers if | |
| // the prediction is good enough... but also don't allow it to lag too far. | |
| if ((twopass->sr_update_lag > 3) || | |
| ((current_frame->frame_number > 0) && | |
| (twopass->this_frame_stats.pcnt_inter > 0.20) && | |
| ((twopass->this_frame_stats.intra_error / | |
| DOUBLE_DIVIDE_CHECK(twopass->this_frame_stats.coded_error)) > 2.0))) { | |
| if (gld_yv12 != NULL) { | |
| assign_frame_buffer_p( | |
| &cm->ref_frame_map[get_ref_frame_map_idx(cm, GOLDEN_FRAME)], | |
| cm->ref_frame_map[get_ref_frame_map_idx(cm, LAST_FRAME)]); | |
| } | |
| twopass->sr_update_lag = 1; | |
| } else { | |
| ++twopass->sr_update_lag; | |
| } | |
| aom_extend_frame_borders(new_yv12, num_planes); | |
| // The frame we just compressed now becomes the last frame. | |
| assign_frame_buffer_p( | |
| &cm->ref_frame_map[get_ref_frame_map_idx(cm, LAST_FRAME)], cm->cur_frame); | |
| // Special case for the first frame. Copy into the GF buffer as a second | |
| // reference. | |
| if (current_frame->frame_number == 0 && | |
| get_ref_frame_map_idx(cm, GOLDEN_FRAME) != INVALID_IDX) { | |
| assign_frame_buffer_p( | |
| &cm->ref_frame_map[get_ref_frame_map_idx(cm, GOLDEN_FRAME)], | |
| cm->ref_frame_map[get_ref_frame_map_idx(cm, LAST_FRAME)]); | |
| } | |
| // Use this to see what the first pass reconstruction looks like. | |
| if (0) { | |
| char filename[512]; | |
| FILE *recon_file; | |
| snprintf(filename, sizeof(filename), "enc%04d.yuv", | |
| (int)current_frame->frame_number); | |
| if (current_frame->frame_number == 0) | |
| recon_file = fopen(filename, "wb"); | |
| else | |
| recon_file = fopen(filename, "ab"); | |
| (void)fwrite(lst_yv12->buffer_alloc, lst_yv12->frame_size, 1, recon_file); | |
| fclose(recon_file); | |
| } | |
| ++current_frame->frame_number; | |
| } |