| /* |
| * Copyright (c) 2023, Alliance for Open Media. All rights reserved. |
| * |
| * This source code is subject to the terms of the BSD 2 Clause License and |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License |
| * was not distributed with this source code in the LICENSE file, you can |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open |
| * Media Patent License 1.0 was not distributed with this source code in the |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. |
| */ |
| |
| #include <arm_neon.h> |
| #include <assert.h> |
| |
| #include "aom_dsp/arm/mem_neon.h" |
| #include "aom_dsp/arm/transpose_neon.h" |
| #include "av1/common/arm/compound_convolve_neon.h" |
| #include "config/aom_config.h" |
| #include "config/av1_rtcd.h" |
| |
| DECLARE_ALIGNED(16, static const uint8_t, dot_prod_permute_tbl[48]) = { |
| 0, 1, 2, 3, 1, 2, 3, 4, 2, 3, 4, 5, 3, 4, 5, 6, |
| 4, 5, 6, 7, 5, 6, 7, 8, 6, 7, 8, 9, 7, 8, 9, 10, |
| 8, 9, 10, 11, 9, 10, 11, 12, 10, 11, 12, 13, 11, 12, 13, 14 |
| }; |
| |
| DECLARE_ALIGNED(16, static const uint8_t, kDotProdMergeBlockTbl[48]) = { |
| // clang-format off |
| // Shift left and insert new last column in transposed 4x4 block. |
| 1, 2, 3, 16, 5, 6, 7, 20, 9, 10, 11, 24, 13, 14, 15, 28, |
| // Shift left and insert two new columns in transposed 4x4 block. |
| 2, 3, 16, 17, 6, 7, 20, 21, 10, 11, 24, 25, 14, 15, 28, 29, |
| // Shift left and insert three new columns in transposed 4x4 block. |
| 3, 16, 17, 18, 7, 20, 21, 22, 11, 24, 25, 26, 15, 28, 29, 30 |
| // clang-format on |
| }; |
| |
| static inline int16x4_t convolve4_4_2d_h(uint8x16_t samples, |
| const int8x8_t x_filter, |
| const int32x4_t correction, |
| const uint8x16_t range_limit, |
| const uint8x16_t permute_tbl) { |
| // Clamp sample range to [-128, 127] for 8-bit signed dot product. |
| int8x16_t clamped_samples = |
| vreinterpretq_s8_u8(vsubq_u8(samples, range_limit)); |
| |
| // Permute samples ready for dot product. |
| // { 0, 1, 2, 3, 1, 2, 3, 4, 2, 3, 4, 5, 3, 4, 5, 6 } |
| int8x16_t permuted_samples = vqtbl1q_s8(clamped_samples, permute_tbl); |
| |
| // Accumulate dot product into 'correction' to account for range clamp. |
| int32x4_t sum = vdotq_lane_s32(correction, permuted_samples, x_filter, 0); |
| |
| // We halved the convolution filter values so -1 from the right shift. |
| return vshrn_n_s32(sum, ROUND0_BITS - 1); |
| } |
| |
| static inline int16x8_t convolve8_8_2d_h(uint8x16_t samples, |
| const int8x8_t x_filter, |
| const int32x4_t correction, |
| const uint8x16_t range_limit, |
| const uint8x16x3_t permute_tbl) { |
| int8x16_t clamped_samples, permuted_samples[3]; |
| int32x4_t sum[2]; |
| |
| // Clamp sample range to [-128, 127] for 8-bit signed dot product. |
| clamped_samples = vreinterpretq_s8_u8(vsubq_u8(samples, range_limit)); |
| |
| // Permute samples ready for dot product. */ |
| // { 0, 1, 2, 3, 1, 2, 3, 4, 2, 3, 4, 5, 3, 4, 5, 6 } |
| permuted_samples[0] = vqtbl1q_s8(clamped_samples, permute_tbl.val[0]); |
| // { 4, 5, 6, 7, 5, 6, 7, 8, 6, 7, 8, 9, 7, 8, 9, 10 } |
| permuted_samples[1] = vqtbl1q_s8(clamped_samples, permute_tbl.val[1]); |
| // { 8, 9, 10, 11, 9, 10, 11, 12, 10, 11, 12, 13, 11, 12, 13, 14 } |
| permuted_samples[2] = vqtbl1q_s8(clamped_samples, permute_tbl.val[2]); |
| |
| // Accumulate dot product into 'correction' to account for range clamp. |
| // First 4 output values. |
| sum[0] = vdotq_lane_s32(correction, permuted_samples[0], x_filter, 0); |
| sum[0] = vdotq_lane_s32(sum[0], permuted_samples[1], x_filter, 1); |
| // Second 4 output values. |
| sum[1] = vdotq_lane_s32(correction, permuted_samples[1], x_filter, 0); |
| sum[1] = vdotq_lane_s32(sum[1], permuted_samples[2], x_filter, 1); |
| |
| // Narrow and re-pack. |
| // We halved the convolution filter values so -1 from the right shift. |
| return vcombine_s16(vshrn_n_s32(sum[0], ROUND0_BITS - 1), |
| vshrn_n_s32(sum[1], ROUND0_BITS - 1)); |
| } |
| |
| static inline void dist_wtd_convolve_2d_horiz_neon_dotprod( |
| const uint8_t *src, int src_stride, int16_t *im_block, const int im_stride, |
| const int16_t *x_filter_ptr, const int im_h, int w) { |
| const int bd = 8; |
| // Dot product constants and other shims. |
| const int16x8_t x_filter_s16 = vld1q_s16(x_filter_ptr); |
| // This shim of 1 << (ROUND0_BITS - 1) enables us to use non-rounding shifts |
| // - which are generally faster than rounding shifts on modern CPUs. |
| const int32_t horiz_const = |
| ((1 << (bd + FILTER_BITS - 1)) + (1 << (ROUND0_BITS - 1))); |
| // Halve the total because we will halve the filter values. |
| const int32x4_t correction = |
| vdupq_n_s32(((128 << FILTER_BITS) + horiz_const) / 2); |
| const uint8x16_t range_limit = vdupq_n_u8(128); |
| |
| const uint8_t *src_ptr = src; |
| int16_t *dst_ptr = im_block; |
| int dst_stride = im_stride; |
| int height = im_h; |
| |
| if (w == 4) { |
| const uint8x16_t permute_tbl = vld1q_u8(dot_prod_permute_tbl); |
| // 4-tap filters are used for blocks having width <= 4. |
| // Filter values are even, so halve to reduce intermediate precision reqs. |
| const int8x8_t x_filter = |
| vshrn_n_s16(vcombine_s16(vld1_s16(x_filter_ptr + 2), vdup_n_s16(0)), 1); |
| |
| src_ptr += 2; |
| |
| do { |
| uint8x16_t s0, s1, s2, s3; |
| load_u8_16x4(src_ptr, src_stride, &s0, &s1, &s2, &s3); |
| |
| int16x4_t d0 = |
| convolve4_4_2d_h(s0, x_filter, correction, range_limit, permute_tbl); |
| int16x4_t d1 = |
| convolve4_4_2d_h(s1, x_filter, correction, range_limit, permute_tbl); |
| int16x4_t d2 = |
| convolve4_4_2d_h(s2, x_filter, correction, range_limit, permute_tbl); |
| int16x4_t d3 = |
| convolve4_4_2d_h(s3, x_filter, correction, range_limit, permute_tbl); |
| |
| store_s16_4x4(dst_ptr, dst_stride, d0, d1, d2, d3); |
| |
| src_ptr += 4 * src_stride; |
| dst_ptr += 4 * dst_stride; |
| height -= 4; |
| } while (height > 4); |
| |
| do { |
| uint8x16_t s0 = vld1q_u8(src_ptr); |
| |
| int16x4_t d0 = |
| convolve4_4_2d_h(s0, x_filter, correction, range_limit, permute_tbl); |
| |
| vst1_s16(dst_ptr, d0); |
| |
| src_ptr += src_stride; |
| dst_ptr += dst_stride; |
| } while (--height != 0); |
| } else { |
| const uint8x16x3_t permute_tbl = vld1q_u8_x3(dot_prod_permute_tbl); |
| // Filter values are even, so halve to reduce intermediate precision reqs. |
| const int8x8_t x_filter = vshrn_n_s16(x_filter_s16, 1); |
| |
| do { |
| const uint8_t *s = src_ptr; |
| int16_t *d = dst_ptr; |
| int width = w; |
| |
| do { |
| uint8x16_t s0, s1, s2, s3; |
| load_u8_16x4(s, src_stride, &s0, &s1, &s2, &s3); |
| |
| int16x8_t d0 = convolve8_8_2d_h(s0, x_filter, correction, range_limit, |
| permute_tbl); |
| int16x8_t d1 = convolve8_8_2d_h(s1, x_filter, correction, range_limit, |
| permute_tbl); |
| int16x8_t d2 = convolve8_8_2d_h(s2, x_filter, correction, range_limit, |
| permute_tbl); |
| int16x8_t d3 = convolve8_8_2d_h(s3, x_filter, correction, range_limit, |
| permute_tbl); |
| |
| store_s16_8x4(d, dst_stride, d0, d1, d2, d3); |
| |
| s += 8; |
| d += 8; |
| width -= 8; |
| } while (width > 0); |
| src_ptr += 4 * src_stride; |
| dst_ptr += 4 * dst_stride; |
| height -= 4; |
| } while (height > 4); |
| |
| do { |
| const uint8_t *s = src_ptr; |
| int16_t *d = dst_ptr; |
| int width = w; |
| |
| do { |
| uint8x16_t s0 = vld1q_u8(s); |
| |
| int16x8_t d0 = convolve8_8_2d_h(s0, x_filter, correction, range_limit, |
| permute_tbl); |
| |
| vst1q_s16(d, d0); |
| |
| s += 8; |
| d += 8; |
| width -= 8; |
| } while (width > 0); |
| src_ptr += src_stride; |
| dst_ptr += dst_stride; |
| } while (--height != 0); |
| } |
| } |
| |
| void av1_dist_wtd_convolve_2d_neon_dotprod( |
| const uint8_t *src, int src_stride, uint8_t *dst8, int dst8_stride, int w, |
| int h, const InterpFilterParams *filter_params_x, |
| const InterpFilterParams *filter_params_y, const int subpel_x_qn, |
| const int subpel_y_qn, ConvolveParams *conv_params) { |
| assert(w % 4 == 0); |
| assert(h % 4 == 0); |
| |
| DECLARE_ALIGNED(16, int16_t, |
| im_block[(MAX_SB_SIZE + SUBPEL_TAPS - 1) * MAX_SB_SIZE]); |
| |
| const int y_filter_taps = get_filter_tap(filter_params_y, subpel_y_qn); |
| const int clamped_y_taps = y_filter_taps < 6 ? 6 : y_filter_taps; |
| |
| const int im_h = h + clamped_y_taps - 1; |
| const int im_stride = MAX_SB_SIZE; |
| const int vert_offset = clamped_y_taps / 2 - 1; |
| const int horiz_offset = filter_params_x->taps / 2 - 1; |
| const uint8_t *src_ptr = src - vert_offset * src_stride - horiz_offset; |
| const int16_t *x_filter_ptr = av1_get_interp_filter_subpel_kernel( |
| filter_params_x, subpel_x_qn & SUBPEL_MASK); |
| const int16_t *y_filter_ptr = av1_get_interp_filter_subpel_kernel( |
| filter_params_y, subpel_y_qn & SUBPEL_MASK); |
| |
| const int16x8_t y_filter = vld1q_s16(y_filter_ptr); |
| |
| dist_wtd_convolve_2d_horiz_neon_dotprod(src_ptr, src_stride, im_block, |
| im_stride, x_filter_ptr, im_h, w); |
| |
| if (clamped_y_taps == 6) { |
| if (conv_params->do_average) { |
| if (UNLIKELY(conv_params->use_dist_wtd_comp_avg)) { |
| dist_wtd_convolve_2d_vert_6tap_dist_wtd_avg_neon( |
| im_block, im_stride, dst8, dst8_stride, conv_params, y_filter, h, |
| w); |
| } else { |
| dist_wtd_convolve_2d_vert_6tap_avg_neon(im_block, im_stride, dst8, |
| dst8_stride, conv_params, |
| y_filter, h, w); |
| } |
| } else { |
| dist_wtd_convolve_2d_vert_6tap_neon(im_block, im_stride, conv_params, |
| y_filter, h, w); |
| } |
| } else { |
| if (conv_params->do_average) { |
| if (UNLIKELY(conv_params->use_dist_wtd_comp_avg)) { |
| dist_wtd_convolve_2d_vert_8tap_dist_wtd_avg_neon( |
| im_block, im_stride, dst8, dst8_stride, conv_params, y_filter, h, |
| w); |
| } else { |
| dist_wtd_convolve_2d_vert_8tap_avg_neon(im_block, im_stride, dst8, |
| dst8_stride, conv_params, |
| y_filter, h, w); |
| } |
| } else { |
| dist_wtd_convolve_2d_vert_8tap_neon(im_block, im_stride, conv_params, |
| y_filter, h, w); |
| } |
| } |
| } |
| |
| static inline uint16x4_t convolve4_4_x(uint8x16_t samples, |
| const int8x8_t x_filter, |
| const int32x4_t correction, |
| const uint8x16_t range_limit, |
| const uint8x16_t permute_tbl) { |
| // Clamp sample range to [-128, 127] for 8-bit signed dot product. |
| int8x16_t clamped_samples = |
| vreinterpretq_s8_u8(vsubq_u8(samples, range_limit)); |
| |
| // Permute samples ready for dot product. |
| // { 0, 1, 2, 3, 1, 2, 3, 4, 2, 3, 4, 5, 3, 4, 5, 6 } |
| int8x16_t permuted_samples = vqtbl1q_s8(clamped_samples, permute_tbl); |
| |
| // Accumulate dot product into 'correction' to account for range clamp. |
| int32x4_t sum = vdotq_lane_s32(correction, permuted_samples, x_filter, 0); |
| |
| // We halved the convolution filter values so -1 from the right shift. |
| return vreinterpret_u16_s16(vshrn_n_s32(sum, ROUND0_BITS - 1)); |
| } |
| |
| static inline uint16x8_t convolve8_8_x(uint8x16_t samples, |
| const int8x8_t x_filter, |
| const int32x4_t correction, |
| const uint8x16_t range_limit, |
| const uint8x16x3_t permute_tbl) { |
| int8x16_t clamped_samples, permuted_samples[3]; |
| int32x4_t sum[2]; |
| |
| // Clamp sample range to [-128, 127] for 8-bit signed dot product. |
| clamped_samples = vreinterpretq_s8_u8(vsubq_u8(samples, range_limit)); |
| |
| // Permute samples ready for dot product. */ |
| // { 0, 1, 2, 3, 1, 2, 3, 4, 2, 3, 4, 5, 3, 4, 5, 6 } |
| permuted_samples[0] = vqtbl1q_s8(clamped_samples, permute_tbl.val[0]); |
| // { 4, 5, 6, 7, 5, 6, 7, 8, 6, 7, 8, 9, 7, 8, 9, 10 } |
| permuted_samples[1] = vqtbl1q_s8(clamped_samples, permute_tbl.val[1]); |
| // { 8, 9, 10, 11, 9, 10, 11, 12, 10, 11, 12, 13, 11, 12, 13, 14 } |
| permuted_samples[2] = vqtbl1q_s8(clamped_samples, permute_tbl.val[2]); |
| |
| // Accumulate dot product into 'correction' to account for range clamp. |
| // First 4 output values. |
| sum[0] = vdotq_lane_s32(correction, permuted_samples[0], x_filter, 0); |
| sum[0] = vdotq_lane_s32(sum[0], permuted_samples[1], x_filter, 1); |
| // Second 4 output values. |
| sum[1] = vdotq_lane_s32(correction, permuted_samples[1], x_filter, 0); |
| sum[1] = vdotq_lane_s32(sum[1], permuted_samples[2], x_filter, 1); |
| |
| // Narrow and re-pack. |
| // We halved the convolution filter values so -1 from the right shift. |
| int16x8_t res = vcombine_s16(vshrn_n_s32(sum[0], ROUND0_BITS - 1), |
| vshrn_n_s32(sum[1], ROUND0_BITS - 1)); |
| return vreinterpretq_u16_s16(res); |
| } |
| |
| static inline void dist_wtd_convolve_x_dist_wtd_avg_neon_dotprod( |
| const uint8_t *src, int src_stride, uint8_t *dst8, int dst8_stride, int w, |
| int h, const InterpFilterParams *filter_params_x, const int subpel_x_qn, |
| ConvolveParams *conv_params) { |
| assert(w % 4 == 0); |
| assert(h % 4 == 0); |
| |
| const int bd = 8; |
| const int offset_bits = bd + 2 * FILTER_BITS - ROUND0_BITS; |
| const int16_t round_offset = (1 << (offset_bits - COMPOUND_ROUND1_BITS)) + |
| (1 << (offset_bits - COMPOUND_ROUND1_BITS - 1)); |
| const int16x8_t round_offset_vec = vdupq_n_s16(round_offset); |
| |
| const uint16_t fwd_offset = conv_params->fwd_offset; |
| const uint16_t bck_offset = conv_params->bck_offset; |
| |
| // Horizontal filter. |
| const int16_t *x_filter_ptr = av1_get_interp_filter_subpel_kernel( |
| filter_params_x, subpel_x_qn & SUBPEL_MASK); |
| const int16x8_t x_filter_s16 = vld1q_s16(x_filter_ptr); |
| |
| // Dot-product constants and other shims. |
| const uint8x16_t range_limit = vdupq_n_u8(128); |
| // Fold round_offset into the dot-product filter correction constant. The |
| // additional shim of 1 << (ROUND0_BITS - 1) enables us to use non-rounding |
| // shifts - which are generally faster than rounding shifts on modern CPUs. |
| // Halve the total because we will halve the filter values. |
| int32x4_t correction = |
| vdupq_n_s32(((128 << FILTER_BITS) + (round_offset << ROUND0_BITS) + |
| (1 << (ROUND0_BITS - 1))) / |
| 2); |
| |
| const int horiz_offset = filter_params_x->taps / 2 - 1; |
| const uint8_t *src_ptr = src - horiz_offset; |
| CONV_BUF_TYPE *dst_ptr = conv_params->dst; |
| uint8_t *dst8_ptr = dst8; |
| int dst_stride = conv_params->dst_stride; |
| int height = h; |
| |
| if (w == 4) { |
| const uint8x16_t permute_tbl = vld1q_u8(dot_prod_permute_tbl); |
| // 4-tap filters are used for blocks having width <= 4. |
| // Filter values are even, so halve to reduce intermediate precision reqs. |
| const int8x8_t x_filter = |
| vshrn_n_s16(vcombine_s16(vld1_s16(x_filter_ptr + 2), vdup_n_s16(0)), 1); |
| |
| src_ptr += 2; |
| |
| do { |
| uint8x16_t s0, s1, s2, s3; |
| load_u8_16x4(src_ptr, src_stride, &s0, &s1, &s2, &s3); |
| |
| uint16x4_t d0 = |
| convolve4_4_x(s0, x_filter, correction, range_limit, permute_tbl); |
| uint16x4_t d1 = |
| convolve4_4_x(s1, x_filter, correction, range_limit, permute_tbl); |
| uint16x4_t d2 = |
| convolve4_4_x(s2, x_filter, correction, range_limit, permute_tbl); |
| uint16x4_t d3 = |
| convolve4_4_x(s3, x_filter, correction, range_limit, permute_tbl); |
| |
| uint16x4_t dd0, dd1, dd2, dd3; |
| load_u16_4x4(dst_ptr, dst_stride, &dd0, &dd1, &dd2, &dd3); |
| |
| uint8x8_t d01_u8, d23_u8; |
| compute_dist_wtd_avg_4x4(dd0, dd1, dd2, dd3, d0, d1, d2, d3, fwd_offset, |
| bck_offset, round_offset_vec, &d01_u8, &d23_u8); |
| |
| store_u8x4_strided_x2(dst8_ptr + 0 * dst8_stride, dst8_stride, d01_u8); |
| store_u8x4_strided_x2(dst8_ptr + 2 * dst8_stride, dst8_stride, d23_u8); |
| |
| src_ptr += 4 * src_stride; |
| dst_ptr += 4 * dst_stride; |
| dst8_ptr += 4 * dst8_stride; |
| height -= 4; |
| } while (height != 0); |
| } else { |
| const uint8x16x3_t permute_tbl = vld1q_u8_x3(dot_prod_permute_tbl); |
| // Filter values are even, so halve to reduce intermediate precision reqs. |
| const int8x8_t x_filter = vshrn_n_s16(x_filter_s16, 1); |
| |
| do { |
| const uint8_t *s = src_ptr; |
| CONV_BUF_TYPE *d = dst_ptr; |
| uint8_t *d_u8 = dst8_ptr; |
| int width = w; |
| |
| do { |
| uint8x16_t s0, s1, s2, s3; |
| load_u8_16x4(s, src_stride, &s0, &s1, &s2, &s3); |
| |
| uint16x8_t d0 = |
| convolve8_8_x(s0, x_filter, correction, range_limit, permute_tbl); |
| uint16x8_t d1 = |
| convolve8_8_x(s1, x_filter, correction, range_limit, permute_tbl); |
| uint16x8_t d2 = |
| convolve8_8_x(s2, x_filter, correction, range_limit, permute_tbl); |
| uint16x8_t d3 = |
| convolve8_8_x(s3, x_filter, correction, range_limit, permute_tbl); |
| |
| uint16x8_t dd0, dd1, dd2, dd3; |
| load_u16_8x4(d, dst_stride, &dd0, &dd1, &dd2, &dd3); |
| |
| uint8x8_t d0_u8, d1_u8, d2_u8, d3_u8; |
| compute_dist_wtd_avg_8x4(dd0, dd1, dd2, dd3, d0, d1, d2, d3, fwd_offset, |
| bck_offset, round_offset_vec, &d0_u8, &d1_u8, |
| &d2_u8, &d3_u8); |
| |
| store_u8_8x4(d_u8, dst8_stride, d0_u8, d1_u8, d2_u8, d3_u8); |
| |
| s += 8; |
| d += 8; |
| d_u8 += 8; |
| width -= 8; |
| } while (width != 0); |
| src_ptr += 4 * src_stride; |
| dst_ptr += 4 * dst_stride; |
| dst8_ptr += 4 * dst8_stride; |
| height -= 4; |
| } while (height != 0); |
| } |
| } |
| |
| static inline void dist_wtd_convolve_x_avg_neon_dotprod( |
| const uint8_t *src, int src_stride, uint8_t *dst8, int dst8_stride, int w, |
| int h, const InterpFilterParams *filter_params_x, const int subpel_x_qn, |
| ConvolveParams *conv_params) { |
| assert(w % 4 == 0); |
| assert(h % 4 == 0); |
| |
| const int bd = 8; |
| const int offset_bits = bd + 2 * FILTER_BITS - ROUND0_BITS; |
| const int16_t round_offset = (1 << (offset_bits - COMPOUND_ROUND1_BITS)) + |
| (1 << (offset_bits - COMPOUND_ROUND1_BITS - 1)); |
| const int16x8_t round_offset_vec = vdupq_n_s16(round_offset); |
| |
| // Horizontal filter. |
| const int16_t *x_filter_ptr = av1_get_interp_filter_subpel_kernel( |
| filter_params_x, subpel_x_qn & SUBPEL_MASK); |
| const int16x8_t x_filter_s16 = vld1q_s16(x_filter_ptr); |
| |
| // Dot-product constants and other shims. |
| const uint8x16_t range_limit = vdupq_n_u8(128); |
| // Fold round_offset into the dot-product filter correction constant. The |
| // additional shim of 1 << (ROUND0_BITS - 1) enables us to use non-rounding |
| // shifts - which are generally faster than rounding shifts on modern CPUs. |
| // Halve the total because we will halve the filter values. |
| int32x4_t correction = |
| vdupq_n_s32(((128 << FILTER_BITS) + (round_offset << ROUND0_BITS) + |
| (1 << (ROUND0_BITS - 1))) / |
| 2); |
| |
| const int horiz_offset = filter_params_x->taps / 2 - 1; |
| const uint8_t *src_ptr = src - horiz_offset; |
| CONV_BUF_TYPE *dst_ptr = conv_params->dst; |
| uint8_t *dst8_ptr = dst8; |
| int dst_stride = conv_params->dst_stride; |
| int height = h; |
| |
| if (w == 4) { |
| const uint8x16_t permute_tbl = vld1q_u8(dot_prod_permute_tbl); |
| // 4-tap filters are used for blocks having width <= 4. |
| // Filter values are even, so halve to reduce intermediate precision reqs. |
| const int8x8_t x_filter = |
| vshrn_n_s16(vcombine_s16(vld1_s16(x_filter_ptr + 2), vdup_n_s16(0)), 1); |
| |
| src_ptr += 2; |
| |
| do { |
| uint8x16_t s0, s1, s2, s3; |
| load_u8_16x4(src_ptr, src_stride, &s0, &s1, &s2, &s3); |
| |
| uint16x4_t d0 = |
| convolve4_4_x(s0, x_filter, correction, range_limit, permute_tbl); |
| uint16x4_t d1 = |
| convolve4_4_x(s1, x_filter, correction, range_limit, permute_tbl); |
| uint16x4_t d2 = |
| convolve4_4_x(s2, x_filter, correction, range_limit, permute_tbl); |
| uint16x4_t d3 = |
| convolve4_4_x(s3, x_filter, correction, range_limit, permute_tbl); |
| |
| uint16x4_t dd0, dd1, dd2, dd3; |
| load_u16_4x4(dst_ptr, dst_stride, &dd0, &dd1, &dd2, &dd3); |
| |
| uint8x8_t d01_u8, d23_u8; |
| compute_basic_avg_4x4(dd0, dd1, dd2, dd3, d0, d1, d2, d3, |
| round_offset_vec, &d01_u8, &d23_u8); |
| |
| store_u8x4_strided_x2(dst8_ptr + 0 * dst8_stride, dst8_stride, d01_u8); |
| store_u8x4_strided_x2(dst8_ptr + 2 * dst8_stride, dst8_stride, d23_u8); |
| |
| src_ptr += 4 * src_stride; |
| dst_ptr += 4 * dst_stride; |
| dst8_ptr += 4 * dst8_stride; |
| height -= 4; |
| } while (height != 0); |
| } else { |
| const uint8x16x3_t permute_tbl = vld1q_u8_x3(dot_prod_permute_tbl); |
| // Filter values are even, so halve to reduce intermediate precision reqs. |
| const int8x8_t x_filter = vshrn_n_s16(x_filter_s16, 1); |
| |
| do { |
| const uint8_t *s = src_ptr; |
| CONV_BUF_TYPE *d = dst_ptr; |
| uint8_t *d_u8 = dst8_ptr; |
| int width = w; |
| |
| do { |
| uint8x16_t s0, s1, s2, s3; |
| load_u8_16x4(s, src_stride, &s0, &s1, &s2, &s3); |
| |
| uint16x8_t d0 = |
| convolve8_8_x(s0, x_filter, correction, range_limit, permute_tbl); |
| uint16x8_t d1 = |
| convolve8_8_x(s1, x_filter, correction, range_limit, permute_tbl); |
| uint16x8_t d2 = |
| convolve8_8_x(s2, x_filter, correction, range_limit, permute_tbl); |
| uint16x8_t d3 = |
| convolve8_8_x(s3, x_filter, correction, range_limit, permute_tbl); |
| |
| uint16x8_t dd0, dd1, dd2, dd3; |
| load_u16_8x4(d, dst_stride, &dd0, &dd1, &dd2, &dd3); |
| |
| uint8x8_t d0_u8, d1_u8, d2_u8, d3_u8; |
| compute_basic_avg_8x4(dd0, dd1, dd2, dd3, d0, d1, d2, d3, |
| round_offset_vec, &d0_u8, &d1_u8, &d2_u8, &d3_u8); |
| |
| store_u8_8x4(d_u8, dst8_stride, d0_u8, d1_u8, d2_u8, d3_u8); |
| |
| s += 8; |
| d += 8; |
| d_u8 += 8; |
| width -= 8; |
| } while (width != 0); |
| src_ptr += 4 * src_stride; |
| dst_ptr += 4 * dst_stride; |
| dst8_ptr += 4 * dst8_stride; |
| height -= 4; |
| } while (height != 0); |
| } |
| } |
| |
| static inline void dist_wtd_convolve_x_neon_dotprod( |
| const uint8_t *src, int src_stride, int w, int h, |
| const InterpFilterParams *filter_params_x, const int subpel_x_qn, |
| ConvolveParams *conv_params) { |
| assert(w % 4 == 0); |
| assert(h % 4 == 0); |
| |
| const int bd = 8; |
| const int offset_bits = bd + 2 * FILTER_BITS - ROUND0_BITS; |
| const int16_t round_offset = (1 << (offset_bits - COMPOUND_ROUND1_BITS)) + |
| (1 << (offset_bits - COMPOUND_ROUND1_BITS - 1)); |
| |
| // Horizontal filter. |
| const int16_t *x_filter_ptr = av1_get_interp_filter_subpel_kernel( |
| filter_params_x, subpel_x_qn & SUBPEL_MASK); |
| const int16x8_t x_filter_s16 = vld1q_s16(x_filter_ptr); |
| |
| // Dot-product constants and other shims. |
| const uint8x16_t range_limit = vdupq_n_u8(128); |
| // Fold round_offset into the dot-product filter correction constant. The |
| // additional shim of 1 << (ROUND0_BITS - 1) enables us to use non-rounding |
| // shifts - which are generally faster than rounding shifts on modern CPUs. |
| // Halve the total because we will halve the vilter values. |
| int32x4_t correction = |
| vdupq_n_s32(((128 << FILTER_BITS) + (round_offset << ROUND0_BITS) + |
| (1 << (ROUND0_BITS - 1))) / |
| 2); |
| |
| const int horiz_offset = filter_params_x->taps / 2 - 1; |
| const uint8_t *src_ptr = src - horiz_offset; |
| CONV_BUF_TYPE *dst_ptr = conv_params->dst; |
| int dst_stride = conv_params->dst_stride; |
| int height = h; |
| |
| if (w == 4) { |
| const uint8x16_t permute_tbl = vld1q_u8(dot_prod_permute_tbl); |
| // 4-tap filters are used for blocks having width <= 4. |
| // Filter values are even, so halve to reduce intermediate precision reqs. |
| const int8x8_t x_filter = |
| vshrn_n_s16(vcombine_s16(vld1_s16(x_filter_ptr + 2), vdup_n_s16(0)), 1); |
| |
| src_ptr += 2; |
| |
| do { |
| uint8x16_t s0, s1, s2, s3; |
| load_u8_16x4(src_ptr, src_stride, &s0, &s1, &s2, &s3); |
| |
| uint16x4_t d0 = |
| convolve4_4_x(s0, x_filter, correction, range_limit, permute_tbl); |
| uint16x4_t d1 = |
| convolve4_4_x(s1, x_filter, correction, range_limit, permute_tbl); |
| uint16x4_t d2 = |
| convolve4_4_x(s2, x_filter, correction, range_limit, permute_tbl); |
| uint16x4_t d3 = |
| convolve4_4_x(s3, x_filter, correction, range_limit, permute_tbl); |
| |
| store_u16_4x4(dst_ptr, dst_stride, d0, d1, d2, d3); |
| |
| src_ptr += 4 * src_stride; |
| dst_ptr += 4 * dst_stride; |
| height -= 4; |
| } while (height != 0); |
| } else { |
| const uint8x16x3_t permute_tbl = vld1q_u8_x3(dot_prod_permute_tbl); |
| // Filter values are even, so halve to reduce intermediate precision reqs. |
| const int8x8_t x_filter = vshrn_n_s16(x_filter_s16, 1); |
| |
| do { |
| const uint8_t *s = src_ptr; |
| CONV_BUF_TYPE *d = dst_ptr; |
| int width = w; |
| |
| do { |
| uint8x16_t s0, s1, s2, s3; |
| load_u8_16x4(s, src_stride, &s0, &s1, &s2, &s3); |
| |
| uint16x8_t d0 = |
| convolve8_8_x(s0, x_filter, correction, range_limit, permute_tbl); |
| uint16x8_t d1 = |
| convolve8_8_x(s1, x_filter, correction, range_limit, permute_tbl); |
| uint16x8_t d2 = |
| convolve8_8_x(s2, x_filter, correction, range_limit, permute_tbl); |
| uint16x8_t d3 = |
| convolve8_8_x(s3, x_filter, correction, range_limit, permute_tbl); |
| |
| store_u16_8x4(d, dst_stride, d0, d1, d2, d3); |
| |
| s += 8; |
| d += 8; |
| width -= 8; |
| } while (width != 0); |
| src_ptr += 4 * src_stride; |
| dst_ptr += 4 * dst_stride; |
| height -= 4; |
| } while (height != 0); |
| } |
| } |
| |
| void av1_dist_wtd_convolve_x_neon_dotprod( |
| const uint8_t *src, int src_stride, uint8_t *dst8, int dst8_stride, int w, |
| int h, const InterpFilterParams *filter_params_x, const int subpel_x_qn, |
| ConvolveParams *conv_params) { |
| if (conv_params->do_average) { |
| if (UNLIKELY(conv_params->use_dist_wtd_comp_avg)) { |
| dist_wtd_convolve_x_dist_wtd_avg_neon_dotprod( |
| src, src_stride, dst8, dst8_stride, w, h, filter_params_x, |
| subpel_x_qn, conv_params); |
| } else { |
| dist_wtd_convolve_x_avg_neon_dotprod(src, src_stride, dst8, dst8_stride, |
| w, h, filter_params_x, subpel_x_qn, |
| conv_params); |
| } |
| } else { |
| dist_wtd_convolve_x_neon_dotprod(src, src_stride, w, h, filter_params_x, |
| subpel_x_qn, conv_params); |
| } |
| } |
| |
| static inline int16x4_t convolve8_4_y(const int8x16_t s0, const int8x16_t s1, |
| const int8x8_t filters) { |
| // The sample range transform and permutation are performed by the caller. |
| // Accumulate into 128 << FILTER_BITS to account for range transform. |
| // (- 1 since we halved the filters.) |
| const int32x4_t acc = vdupq_n_s32(128 << (FILTER_BITS - 1)); |
| int32x4_t sum = vdotq_lane_s32(acc, s0, filters, 0); |
| sum = vdotq_lane_s32(sum, s1, filters, 1); |
| |
| // Further narrowing and packing is performed by the caller. |
| return vmovn_s32(sum); |
| } |
| |
| static inline uint16x8_t convolve8_8_y(const int8x16_t s0_lo, |
| const int8x16_t s0_hi, |
| const int8x16_t s1_lo, |
| const int8x16_t s1_hi, |
| const int8x8_t filters, |
| const int16x8_t round_offset) { |
| // The sample range transform and permutation are performed by the caller. |
| // Accumulate into 128 << FILTER_BITS to account for range transform. |
| // (- 1 since we halved the filters.) |
| const int32x4_t acc = vdupq_n_s32(128 << (FILTER_BITS - 1)); |
| |
| int32x4_t sum0123 = vdotq_lane_s32(acc, s0_lo, filters, 0); |
| sum0123 = vdotq_lane_s32(sum0123, s1_lo, filters, 1); |
| |
| int32x4_t sum4567 = vdotq_lane_s32(acc, s0_hi, filters, 0); |
| sum4567 = vdotq_lane_s32(sum4567, s1_hi, filters, 1); |
| |
| // Narrow and re-pack. |
| int16x8_t sum = vcombine_s16(vmovn_s32(sum0123), vmovn_s32(sum4567)); |
| |
| // We halved the filter values so -1 from right shift. |
| return vreinterpretq_u16_s16( |
| vrsraq_n_s16(round_offset, sum, ROUND0_BITS - 1)); |
| } |
| |
| static inline void dist_wtd_convolve_y_8tap_neon_dotprod( |
| const uint8_t *src_ptr, int src_stride, int w, int h, |
| const int16_t *y_filter_ptr, ConvolveParams *conv_params) { |
| const int bd = 8; |
| const int offset_bits = bd + 2 * FILTER_BITS - ROUND0_BITS; |
| const int16_t round_offset = (1 << (offset_bits - COMPOUND_ROUND1_BITS)) + |
| (1 << (offset_bits - COMPOUND_ROUND1_BITS - 1)); |
| const int16x8_t round_offset_vec = vdupq_n_s16(round_offset); |
| |
| CONV_BUF_TYPE *dst_ptr = conv_params->dst; |
| const int dst_stride = conv_params->dst_stride; |
| |
| // Filter values are even, so halve to reduce intermediate precision reqs. |
| const int8x8_t filter = vshrn_n_s16(vld1q_s16(y_filter_ptr), 1); |
| |
| const uint8x16x3_t merge_block_tbl = vld1q_u8_x3(kDotProdMergeBlockTbl); |
| |
| if (w == 4) { |
| uint8x8_t t0, t1, t2, t3, t4, t5, t6; |
| load_u8_8x7(src_ptr, src_stride, &t0, &t1, &t2, &t3, &t4, &t5, &t6); |
| src_ptr += 7 * src_stride; |
| |
| // Transform sample range to [-128, 127] for 8-bit signed dot product. |
| int8x8_t s0 = vreinterpret_s8_u8(vsub_u8(t0, vdup_n_u8(128))); |
| int8x8_t s1 = vreinterpret_s8_u8(vsub_u8(t1, vdup_n_u8(128))); |
| int8x8_t s2 = vreinterpret_s8_u8(vsub_u8(t2, vdup_n_u8(128))); |
| int8x8_t s3 = vreinterpret_s8_u8(vsub_u8(t3, vdup_n_u8(128))); |
| int8x8_t s4 = vreinterpret_s8_u8(vsub_u8(t4, vdup_n_u8(128))); |
| int8x8_t s5 = vreinterpret_s8_u8(vsub_u8(t5, vdup_n_u8(128))); |
| int8x8_t s6 = vreinterpret_s8_u8(vsub_u8(t6, vdup_n_u8(128))); |
| |
| int8x16_t s0123, s1234, s2345, s3456; |
| transpose_concat_elems_s8_4x4(s0, s1, s2, s3, &s0123); |
| transpose_concat_elems_s8_4x4(s1, s2, s3, s4, &s1234); |
| transpose_concat_elems_s8_4x4(s2, s3, s4, s5, &s2345); |
| transpose_concat_elems_s8_4x4(s3, s4, s5, s6, &s3456); |
| |
| do { |
| uint8x8_t t7, t8, t9, tA; |
| load_u8_8x4(src_ptr, src_stride, &t7, &t8, &t9, &tA); |
| |
| int8x8_t s7 = vreinterpret_s8_u8(vsub_u8(t7, vdup_n_u8(128))); |
| int8x8_t s8 = vreinterpret_s8_u8(vsub_u8(t8, vdup_n_u8(128))); |
| int8x8_t s9 = vreinterpret_s8_u8(vsub_u8(t9, vdup_n_u8(128))); |
| int8x8_t sA = vreinterpret_s8_u8(vsub_u8(tA, vdup_n_u8(128))); |
| |
| int8x16_t s4567, s5678, s6789, s789A; |
| transpose_concat_elems_s8_4x4(s7, s8, s9, sA, &s789A); |
| |
| // Merge new data into block from previous iteration. |
| int8x16x2_t samples_LUT = { { s3456, s789A } }; |
| s4567 = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[0]); |
| s5678 = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[1]); |
| s6789 = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[2]); |
| |
| int16x4_t d0 = convolve8_4_y(s0123, s4567, filter); |
| int16x4_t d1 = convolve8_4_y(s1234, s5678, filter); |
| int16x4_t d2 = convolve8_4_y(s2345, s6789, filter); |
| int16x4_t d3 = convolve8_4_y(s3456, s789A, filter); |
| |
| // We halved the filter values so -1 from right shift. |
| int16x8_t d01 = |
| vrsraq_n_s16(round_offset_vec, vcombine_s16(d0, d1), ROUND0_BITS - 1); |
| int16x8_t d23 = |
| vrsraq_n_s16(round_offset_vec, vcombine_s16(d2, d3), ROUND0_BITS - 1); |
| |
| store_u16x4_strided_x2(dst_ptr + 0 * dst_stride, dst_stride, |
| vreinterpretq_u16_s16(d01)); |
| store_u16x4_strided_x2(dst_ptr + 2 * dst_stride, dst_stride, |
| vreinterpretq_u16_s16(d23)); |
| |
| // Prepare block for next iteration - re-using as much as possible. |
| // Shuffle everything up four rows. |
| s0123 = s4567; |
| s1234 = s5678; |
| s2345 = s6789; |
| s3456 = s789A; |
| |
| src_ptr += 4 * src_stride; |
| dst_ptr += 4 * dst_stride; |
| h -= 4; |
| } while (h != 0); |
| } else { |
| do { |
| int height = h; |
| const uint8_t *s = src_ptr; |
| CONV_BUF_TYPE *d = dst_ptr; |
| |
| uint8x8_t t0, t1, t2, t3, t4, t5, t6; |
| load_u8_8x7(s, src_stride, &t0, &t1, &t2, &t3, &t4, &t5, &t6); |
| s += 7 * src_stride; |
| |
| // Transform sample range to [-128, 127] for 8-bit signed dot product. |
| int8x8_t s0 = vreinterpret_s8_u8(vsub_u8(t0, vdup_n_u8(128))); |
| int8x8_t s1 = vreinterpret_s8_u8(vsub_u8(t1, vdup_n_u8(128))); |
| int8x8_t s2 = vreinterpret_s8_u8(vsub_u8(t2, vdup_n_u8(128))); |
| int8x8_t s3 = vreinterpret_s8_u8(vsub_u8(t3, vdup_n_u8(128))); |
| int8x8_t s4 = vreinterpret_s8_u8(vsub_u8(t4, vdup_n_u8(128))); |
| int8x8_t s5 = vreinterpret_s8_u8(vsub_u8(t5, vdup_n_u8(128))); |
| int8x8_t s6 = vreinterpret_s8_u8(vsub_u8(t6, vdup_n_u8(128))); |
| |
| // This operation combines a conventional transpose and the sample |
| // permute (see horizontal case) required before computing the dot |
| // product. |
| int8x16_t s0123_lo, s0123_hi, s1234_lo, s1234_hi, s2345_lo, s2345_hi, |
| s3456_lo, s3456_hi; |
| transpose_concat_elems_s8_8x4(s0, s1, s2, s3, &s0123_lo, &s0123_hi); |
| transpose_concat_elems_s8_8x4(s1, s2, s3, s4, &s1234_lo, &s1234_hi); |
| transpose_concat_elems_s8_8x4(s2, s3, s4, s5, &s2345_lo, &s2345_hi); |
| transpose_concat_elems_s8_8x4(s3, s4, s5, s6, &s3456_lo, &s3456_hi); |
| |
| do { |
| uint8x8_t t7, t8, t9, tA; |
| load_u8_8x4(s, src_stride, &t7, &t8, &t9, &tA); |
| |
| int8x8_t s7 = vreinterpret_s8_u8(vsub_u8(t7, vdup_n_u8(128))); |
| int8x8_t s8 = vreinterpret_s8_u8(vsub_u8(t8, vdup_n_u8(128))); |
| int8x8_t s9 = vreinterpret_s8_u8(vsub_u8(t9, vdup_n_u8(128))); |
| int8x8_t sA = vreinterpret_s8_u8(vsub_u8(tA, vdup_n_u8(128))); |
| |
| int8x16_t s4567_lo, s4567_hi, s5678_lo, s5678_hi, s6789_lo, s6789_hi, |
| s789A_lo, s789A_hi; |
| transpose_concat_elems_s8_8x4(s7, s8, s9, sA, &s789A_lo, &s789A_hi); |
| |
| // Merge new data into block from previous iteration. |
| int8x16x2_t samples_LUT_lo = { { s3456_lo, s789A_lo } }; |
| s4567_lo = vqtbl2q_s8(samples_LUT_lo, merge_block_tbl.val[0]); |
| s5678_lo = vqtbl2q_s8(samples_LUT_lo, merge_block_tbl.val[1]); |
| s6789_lo = vqtbl2q_s8(samples_LUT_lo, merge_block_tbl.val[2]); |
| |
| int8x16x2_t samples_LUT_hi = { { s3456_hi, s789A_hi } }; |
| s4567_hi = vqtbl2q_s8(samples_LUT_hi, merge_block_tbl.val[0]); |
| s5678_hi = vqtbl2q_s8(samples_LUT_hi, merge_block_tbl.val[1]); |
| s6789_hi = vqtbl2q_s8(samples_LUT_hi, merge_block_tbl.val[2]); |
| |
| uint16x8_t d0 = convolve8_8_y(s0123_lo, s0123_hi, s4567_lo, s4567_hi, |
| filter, round_offset_vec); |
| uint16x8_t d1 = convolve8_8_y(s1234_lo, s1234_hi, s5678_lo, s5678_hi, |
| filter, round_offset_vec); |
| uint16x8_t d2 = convolve8_8_y(s2345_lo, s2345_hi, s6789_lo, s6789_hi, |
| filter, round_offset_vec); |
| uint16x8_t d3 = convolve8_8_y(s3456_lo, s3456_hi, s789A_lo, s789A_hi, |
| filter, round_offset_vec); |
| |
| store_u16_8x4(d, dst_stride, d0, d1, d2, d3); |
| |
| // Prepare block for next iteration - re-using as much as possible. |
| // Shuffle everything up four rows. |
| s0123_lo = s4567_lo; |
| s0123_hi = s4567_hi; |
| s1234_lo = s5678_lo; |
| s1234_hi = s5678_hi; |
| s2345_lo = s6789_lo; |
| s2345_hi = s6789_hi; |
| s3456_lo = s789A_lo; |
| s3456_hi = s789A_hi; |
| |
| s += 4 * src_stride; |
| d += 4 * dst_stride; |
| height -= 4; |
| } while (height != 0); |
| src_ptr += 8; |
| dst_ptr += 8; |
| w -= 8; |
| } while (w != 0); |
| } |
| } |
| |
| static inline void dist_wtd_convolve_y_8tap_dist_wtd_avg_neon_dotprod( |
| const uint8_t *src_ptr, int src_stride, uint8_t *dst8_ptr, |
| const int dst8_stride, int w, int h, const int16_t *y_filter_ptr, |
| ConvolveParams *conv_params) { |
| const int bd = 8; |
| const int offset_bits = bd + 2 * FILTER_BITS - ROUND0_BITS; |
| const int16_t round_offset = (1 << (offset_bits - COMPOUND_ROUND1_BITS)) + |
| (1 << (offset_bits - COMPOUND_ROUND1_BITS - 1)); |
| const int16x8_t round_offset_vec = vdupq_n_s16(round_offset); |
| |
| const uint16_t fwd_offset = conv_params->fwd_offset; |
| const uint16_t bck_offset = conv_params->bck_offset; |
| |
| CONV_BUF_TYPE *dst_ptr = conv_params->dst; |
| const int dst_stride = conv_params->dst_stride; |
| |
| // Filter values are even, so halve to reduce intermediate precision reqs. |
| const int8x8_t filter = vshrn_n_s16(vld1q_s16(y_filter_ptr), 1); |
| |
| const uint8x16x3_t merge_block_tbl = vld1q_u8_x3(kDotProdMergeBlockTbl); |
| |
| if (w == 4) { |
| uint8x8_t t0, t1, t2, t3, t4, t5, t6; |
| load_u8_8x7(src_ptr, src_stride, &t0, &t1, &t2, &t3, &t4, &t5, &t6); |
| src_ptr += 7 * src_stride; |
| |
| // Transform sample range to [-128, 127] for 8-bit signed dot product. |
| int8x8_t s0 = vreinterpret_s8_u8(vsub_u8(t0, vdup_n_u8(128))); |
| int8x8_t s1 = vreinterpret_s8_u8(vsub_u8(t1, vdup_n_u8(128))); |
| int8x8_t s2 = vreinterpret_s8_u8(vsub_u8(t2, vdup_n_u8(128))); |
| int8x8_t s3 = vreinterpret_s8_u8(vsub_u8(t3, vdup_n_u8(128))); |
| int8x8_t s4 = vreinterpret_s8_u8(vsub_u8(t4, vdup_n_u8(128))); |
| int8x8_t s5 = vreinterpret_s8_u8(vsub_u8(t5, vdup_n_u8(128))); |
| int8x8_t s6 = vreinterpret_s8_u8(vsub_u8(t6, vdup_n_u8(128))); |
| |
| int8x16_t s0123, s1234, s2345, s3456; |
| transpose_concat_elems_s8_4x4(s0, s1, s2, s3, &s0123); |
| transpose_concat_elems_s8_4x4(s1, s2, s3, s4, &s1234); |
| transpose_concat_elems_s8_4x4(s2, s3, s4, s5, &s2345); |
| transpose_concat_elems_s8_4x4(s3, s4, s5, s6, &s3456); |
| |
| do { |
| uint8x8_t t7, t8, t9, tA; |
| load_u8_8x4(src_ptr, src_stride, &t7, &t8, &t9, &tA); |
| |
| int8x8_t s7 = vreinterpret_s8_u8(vsub_u8(t7, vdup_n_u8(128))); |
| int8x8_t s8 = vreinterpret_s8_u8(vsub_u8(t8, vdup_n_u8(128))); |
| int8x8_t s9 = vreinterpret_s8_u8(vsub_u8(t9, vdup_n_u8(128))); |
| int8x8_t sA = vreinterpret_s8_u8(vsub_u8(tA, vdup_n_u8(128))); |
| |
| int8x16_t s4567, s5678, s6789, s789A; |
| transpose_concat_elems_s8_4x4(s7, s8, s9, sA, &s789A); |
| |
| // Merge new data into block from previous iteration. |
| int8x16x2_t samples_LUT = { { s3456, s789A } }; |
| s4567 = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[0]); |
| s5678 = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[1]); |
| s6789 = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[2]); |
| |
| int16x4_t d0 = convolve8_4_y(s0123, s4567, filter); |
| int16x4_t d1 = convolve8_4_y(s1234, s5678, filter); |
| int16x4_t d2 = convolve8_4_y(s2345, s6789, filter); |
| int16x4_t d3 = convolve8_4_y(s3456, s789A, filter); |
| |
| // We halved the filter values so -1 from right shift. |
| uint16x8_t d01 = vreinterpretq_u16_s16(vrsraq_n_s16( |
| round_offset_vec, vcombine_s16(d0, d1), ROUND0_BITS - 1)); |
| uint16x8_t d23 = vreinterpretq_u16_s16(vrsraq_n_s16( |
| round_offset_vec, vcombine_s16(d2, d3), ROUND0_BITS - 1)); |
| |
| uint16x4_t dd0, dd1, dd2, dd3; |
| load_u16_4x4(dst_ptr, dst_stride, &dd0, &dd1, &dd2, &dd3); |
| |
| uint8x8_t d0_u8, d1_u8; |
| compute_dist_wtd_avg_8x2(vcombine_u16(dd0, dd1), vcombine_u16(dd2, dd3), |
| d01, d23, fwd_offset, bck_offset, |
| round_offset_vec, &d0_u8, &d1_u8); |
| |
| store_u8x4_strided_x2(dst8_ptr + 0 * dst8_stride, dst8_stride, d0_u8); |
| store_u8x4_strided_x2(dst8_ptr + 2 * dst8_stride, dst8_stride, d1_u8); |
| |
| // Prepare block for next iteration - re-using as much as possible. |
| // Shuffle everything up four rows. |
| s0123 = s4567; |
| s1234 = s5678; |
| s2345 = s6789; |
| s3456 = s789A; |
| |
| src_ptr += 4 * src_stride; |
| dst_ptr += 4 * dst_stride; |
| dst8_ptr += 4 * dst8_stride; |
| h -= 4; |
| } while (h != 0); |
| } else { |
| do { |
| int height = h; |
| const uint8_t *s = src_ptr; |
| CONV_BUF_TYPE *d = dst_ptr; |
| uint8_t *d_u8 = dst8_ptr; |
| |
| uint8x8_t t0, t1, t2, t3, t4, t5, t6; |
| load_u8_8x7(s, src_stride, &t0, &t1, &t2, &t3, &t4, &t5, &t6); |
| s += 7 * src_stride; |
| |
| // Transform sample range to [-128, 127] for 8-bit signed dot product. |
| int8x8_t s0 = vreinterpret_s8_u8(vsub_u8(t0, vdup_n_u8(128))); |
| int8x8_t s1 = vreinterpret_s8_u8(vsub_u8(t1, vdup_n_u8(128))); |
| int8x8_t s2 = vreinterpret_s8_u8(vsub_u8(t2, vdup_n_u8(128))); |
| int8x8_t s3 = vreinterpret_s8_u8(vsub_u8(t3, vdup_n_u8(128))); |
| int8x8_t s4 = vreinterpret_s8_u8(vsub_u8(t4, vdup_n_u8(128))); |
| int8x8_t s5 = vreinterpret_s8_u8(vsub_u8(t5, vdup_n_u8(128))); |
| int8x8_t s6 = vreinterpret_s8_u8(vsub_u8(t6, vdup_n_u8(128))); |
| |
| // This operation combines a conventional transpose and the sample |
| // permute (see horizontal case) required before computing the dot |
| // product. |
| int8x16_t s0123_lo, s0123_hi, s1234_lo, s1234_hi, s2345_lo, s2345_hi, |
| s3456_lo, s3456_hi; |
| transpose_concat_elems_s8_8x4(s0, s1, s2, s3, &s0123_lo, &s0123_hi); |
| transpose_concat_elems_s8_8x4(s1, s2, s3, s4, &s1234_lo, &s1234_hi); |
| transpose_concat_elems_s8_8x4(s2, s3, s4, s5, &s2345_lo, &s2345_hi); |
| transpose_concat_elems_s8_8x4(s3, s4, s5, s6, &s3456_lo, &s3456_hi); |
| |
| do { |
| uint8x8_t t7, t8, t9, tA; |
| load_u8_8x4(s, src_stride, &t7, &t8, &t9, &tA); |
| |
| int8x8_t s7 = vreinterpret_s8_u8(vsub_u8(t7, vdup_n_u8(128))); |
| int8x8_t s8 = vreinterpret_s8_u8(vsub_u8(t8, vdup_n_u8(128))); |
| int8x8_t s9 = vreinterpret_s8_u8(vsub_u8(t9, vdup_n_u8(128))); |
| int8x8_t sA = vreinterpret_s8_u8(vsub_u8(tA, vdup_n_u8(128))); |
| |
| int8x16_t s4567_lo, s4567_hi, s5678_lo, s5678_hi, s6789_lo, s6789_hi, |
| s789A_lo, s789A_hi; |
| transpose_concat_elems_s8_8x4(s7, s8, s9, sA, &s789A_lo, &s789A_hi); |
| |
| // Merge new data into block from previous iteration. |
| int8x16x2_t samples_LUT_lo = { { s3456_lo, s789A_lo } }; |
| s4567_lo = vqtbl2q_s8(samples_LUT_lo, merge_block_tbl.val[0]); |
| s5678_lo = vqtbl2q_s8(samples_LUT_lo, merge_block_tbl.val[1]); |
| s6789_lo = vqtbl2q_s8(samples_LUT_lo, merge_block_tbl.val[2]); |
| |
| int8x16x2_t samples_LUT_hi = { { s3456_hi, s789A_hi } }; |
| s4567_hi = vqtbl2q_s8(samples_LUT_hi, merge_block_tbl.val[0]); |
| s5678_hi = vqtbl2q_s8(samples_LUT_hi, merge_block_tbl.val[1]); |
| s6789_hi = vqtbl2q_s8(samples_LUT_hi, merge_block_tbl.val[2]); |
| |
| uint16x8_t d0 = convolve8_8_y(s0123_lo, s0123_hi, s4567_lo, s4567_hi, |
| filter, round_offset_vec); |
| uint16x8_t d1 = convolve8_8_y(s1234_lo, s1234_hi, s5678_lo, s5678_hi, |
| filter, round_offset_vec); |
| uint16x8_t d2 = convolve8_8_y(s2345_lo, s2345_hi, s6789_lo, s6789_hi, |
| filter, round_offset_vec); |
| uint16x8_t d3 = convolve8_8_y(s3456_lo, s3456_hi, s789A_lo, s789A_hi, |
| filter, round_offset_vec); |
| |
| uint16x8_t dd0, dd1, dd2, dd3; |
| load_u16_8x4(d, dst_stride, &dd0, &dd1, &dd2, &dd3); |
| |
| uint8x8_t d0_u8, d1_u8, d2_u8, d3_u8; |
| compute_dist_wtd_avg_8x4(dd0, dd1, dd2, dd3, d0, d1, d2, d3, fwd_offset, |
| bck_offset, round_offset_vec, &d0_u8, &d1_u8, |
| &d2_u8, &d3_u8); |
| |
| store_u8_8x4(d_u8, dst8_stride, d0_u8, d1_u8, d2_u8, d3_u8); |
| |
| // Prepare block for next iteration - re-using as much as possible. |
| // Shuffle everything up four rows. |
| s0123_lo = s4567_lo; |
| s0123_hi = s4567_hi; |
| s1234_lo = s5678_lo; |
| s1234_hi = s5678_hi; |
| s2345_lo = s6789_lo; |
| s2345_hi = s6789_hi; |
| s3456_lo = s789A_lo; |
| s3456_hi = s789A_hi; |
| |
| s += 4 * src_stride; |
| d += 4 * dst_stride; |
| d_u8 += 4 * dst8_stride; |
| height -= 4; |
| } while (height != 0); |
| src_ptr += 8; |
| dst_ptr += 8; |
| dst8_ptr += 8; |
| w -= 8; |
| } while (w != 0); |
| } |
| } |
| |
| static inline void dist_wtd_convolve_y_8tap_avg_neon_dotprod( |
| const uint8_t *src_ptr, int src_stride, uint8_t *dst8_ptr, |
| const int dst8_stride, int w, int h, const int16_t *y_filter_ptr, |
| ConvolveParams *conv_params) { |
| const int bd = 8; |
| const int offset_bits = bd + 2 * FILTER_BITS - ROUND0_BITS; |
| const int16_t round_offset = (1 << (offset_bits - COMPOUND_ROUND1_BITS)) + |
| (1 << (offset_bits - COMPOUND_ROUND1_BITS - 1)); |
| const int16x8_t round_offset_vec = vdupq_n_s16(round_offset); |
| |
| CONV_BUF_TYPE *dst_ptr = conv_params->dst; |
| const int dst_stride = conv_params->dst_stride; |
| |
| // Filter values are even, so halve to reduce intermediate precision reqs. |
| const int8x8_t filter = vshrn_n_s16(vld1q_s16(y_filter_ptr), 1); |
| |
| const uint8x16x3_t merge_block_tbl = vld1q_u8_x3(kDotProdMergeBlockTbl); |
| |
| if (w == 4) { |
| uint8x8_t t0, t1, t2, t3, t4, t5, t6; |
| load_u8_8x7(src_ptr, src_stride, &t0, &t1, &t2, &t3, &t4, &t5, &t6); |
| src_ptr += 7 * src_stride; |
| |
| // Transform sample range to [-128, 127] for 8-bit signed dot product. |
| int8x8_t s0 = vreinterpret_s8_u8(vsub_u8(t0, vdup_n_u8(128))); |
| int8x8_t s1 = vreinterpret_s8_u8(vsub_u8(t1, vdup_n_u8(128))); |
| int8x8_t s2 = vreinterpret_s8_u8(vsub_u8(t2, vdup_n_u8(128))); |
| int8x8_t s3 = vreinterpret_s8_u8(vsub_u8(t3, vdup_n_u8(128))); |
| int8x8_t s4 = vreinterpret_s8_u8(vsub_u8(t4, vdup_n_u8(128))); |
| int8x8_t s5 = vreinterpret_s8_u8(vsub_u8(t5, vdup_n_u8(128))); |
| int8x8_t s6 = vreinterpret_s8_u8(vsub_u8(t6, vdup_n_u8(128))); |
| |
| int8x16_t s0123, s1234, s2345, s3456; |
| transpose_concat_elems_s8_4x4(s0, s1, s2, s3, &s0123); |
| transpose_concat_elems_s8_4x4(s1, s2, s3, s4, &s1234); |
| transpose_concat_elems_s8_4x4(s2, s3, s4, s5, &s2345); |
| transpose_concat_elems_s8_4x4(s3, s4, s5, s6, &s3456); |
| |
| do { |
| uint8x8_t t7, t8, t9, tA; |
| load_u8_8x4(src_ptr, src_stride, &t7, &t8, &t9, &tA); |
| |
| int8x8_t s7 = vreinterpret_s8_u8(vsub_u8(t7, vdup_n_u8(128))); |
| int8x8_t s8 = vreinterpret_s8_u8(vsub_u8(t8, vdup_n_u8(128))); |
| int8x8_t s9 = vreinterpret_s8_u8(vsub_u8(t9, vdup_n_u8(128))); |
| int8x8_t sA = vreinterpret_s8_u8(vsub_u8(tA, vdup_n_u8(128))); |
| |
| int8x16_t s4567, s5678, s6789, s789A; |
| transpose_concat_elems_s8_4x4(s7, s8, s9, sA, &s789A); |
| |
| // Merge new data into block from previous iteration. |
| int8x16x2_t samples_LUT = { { s3456, s789A } }; |
| s4567 = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[0]); |
| s5678 = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[1]); |
| s6789 = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[2]); |
| |
| int16x4_t d0 = convolve8_4_y(s0123, s4567, filter); |
| int16x4_t d1 = convolve8_4_y(s1234, s5678, filter); |
| int16x4_t d2 = convolve8_4_y(s2345, s6789, filter); |
| int16x4_t d3 = convolve8_4_y(s3456, s789A, filter); |
| |
| // We halved the filter values so -1 from right shift. |
| uint16x8_t d01 = vreinterpretq_u16_s16(vrsraq_n_s16( |
| round_offset_vec, vcombine_s16(d0, d1), ROUND0_BITS - 1)); |
| uint16x8_t d23 = vreinterpretq_u16_s16(vrsraq_n_s16( |
| round_offset_vec, vcombine_s16(d2, d3), ROUND0_BITS - 1)); |
| |
| uint16x4_t dd0, dd1, dd2, dd3; |
| load_u16_4x4(dst_ptr, dst_stride, &dd0, &dd1, &dd2, &dd3); |
| |
| uint8x8_t d0_u8, d1_u8; |
| compute_basic_avg_8x2(vcombine_u16(dd0, dd1), vcombine_u16(dd2, dd3), d01, |
| d23, round_offset_vec, &d0_u8, &d1_u8); |
| |
| store_u8x4_strided_x2(dst8_ptr + 0 * dst8_stride, dst8_stride, d0_u8); |
| store_u8x4_strided_x2(dst8_ptr + 2 * dst8_stride, dst8_stride, d1_u8); |
| |
| // Prepare block for next iteration - re-using as much as possible. |
| // Shuffle everything up four rows. |
| s0123 = s4567; |
| s1234 = s5678; |
| s2345 = s6789; |
| s3456 = s789A; |
| |
| src_ptr += 4 * src_stride; |
| dst_ptr += 4 * dst_stride; |
| dst8_ptr += 4 * dst8_stride; |
| h -= 4; |
| } while (h != 0); |
| } else { |
| do { |
| int height = h; |
| const uint8_t *s = src_ptr; |
| CONV_BUF_TYPE *d = dst_ptr; |
| uint8_t *d_u8 = dst8_ptr; |
| |
| uint8x8_t t0, t1, t2, t3, t4, t5, t6; |
| load_u8_8x7(s, src_stride, &t0, &t1, &t2, &t3, &t4, &t5, &t6); |
| s += 7 * src_stride; |
| |
| // Transform sample range to [-128, 127] for 8-bit signed dot product. |
| int8x8_t s0 = vreinterpret_s8_u8(vsub_u8(t0, vdup_n_u8(128))); |
| int8x8_t s1 = vreinterpret_s8_u8(vsub_u8(t1, vdup_n_u8(128))); |
| int8x8_t s2 = vreinterpret_s8_u8(vsub_u8(t2, vdup_n_u8(128))); |
| int8x8_t s3 = vreinterpret_s8_u8(vsub_u8(t3, vdup_n_u8(128))); |
| int8x8_t s4 = vreinterpret_s8_u8(vsub_u8(t4, vdup_n_u8(128))); |
| int8x8_t s5 = vreinterpret_s8_u8(vsub_u8(t5, vdup_n_u8(128))); |
| int8x8_t s6 = vreinterpret_s8_u8(vsub_u8(t6, vdup_n_u8(128))); |
| |
| // This operation combines a conventional transpose and the sample |
| // permute (see horizontal case) required before computing the dot |
| // product. |
| int8x16_t s0123_lo, s0123_hi, s1234_lo, s1234_hi, s2345_lo, s2345_hi, |
| s3456_lo, s3456_hi; |
| transpose_concat_elems_s8_8x4(s0, s1, s2, s3, &s0123_lo, &s0123_hi); |
| transpose_concat_elems_s8_8x4(s1, s2, s3, s4, &s1234_lo, &s1234_hi); |
| transpose_concat_elems_s8_8x4(s2, s3, s4, s5, &s2345_lo, &s2345_hi); |
| transpose_concat_elems_s8_8x4(s3, s4, s5, s6, &s3456_lo, &s3456_hi); |
| |
| do { |
| uint8x8_t t7, t8, t9, tA; |
| load_u8_8x4(s, src_stride, &t7, &t8, &t9, &tA); |
| |
| int8x8_t s7 = vreinterpret_s8_u8(vsub_u8(t7, vdup_n_u8(128))); |
| int8x8_t s8 = vreinterpret_s8_u8(vsub_u8(t8, vdup_n_u8(128))); |
| int8x8_t s9 = vreinterpret_s8_u8(vsub_u8(t9, vdup_n_u8(128))); |
| int8x8_t sA = vreinterpret_s8_u8(vsub_u8(tA, vdup_n_u8(128))); |
| |
| int8x16_t s4567_lo, s4567_hi, s5678_lo, s5678_hi, s6789_lo, s6789_hi, |
| s789A_lo, s789A_hi; |
| transpose_concat_elems_s8_8x4(s7, s8, s9, sA, &s789A_lo, &s789A_hi); |
| |
| // Merge new data into block from previous iteration. |
| int8x16x2_t samples_LUT_lo = { { s3456_lo, s789A_lo } }; |
| s4567_lo = vqtbl2q_s8(samples_LUT_lo, merge_block_tbl.val[0]); |
| s5678_lo = vqtbl2q_s8(samples_LUT_lo, merge_block_tbl.val[1]); |
| s6789_lo = vqtbl2q_s8(samples_LUT_lo, merge_block_tbl.val[2]); |
| |
| int8x16x2_t samples_LUT_hi = { { s3456_hi, s789A_hi } }; |
| s4567_hi = vqtbl2q_s8(samples_LUT_hi, merge_block_tbl.val[0]); |
| s5678_hi = vqtbl2q_s8(samples_LUT_hi, merge_block_tbl.val[1]); |
| s6789_hi = vqtbl2q_s8(samples_LUT_hi, merge_block_tbl.val[2]); |
| |
| uint16x8_t d0 = convolve8_8_y(s0123_lo, s0123_hi, s4567_lo, s4567_hi, |
| filter, round_offset_vec); |
| uint16x8_t d1 = convolve8_8_y(s1234_lo, s1234_hi, s5678_lo, s5678_hi, |
| filter, round_offset_vec); |
| uint16x8_t d2 = convolve8_8_y(s2345_lo, s2345_hi, s6789_lo, s6789_hi, |
| filter, round_offset_vec); |
| uint16x8_t d3 = convolve8_8_y(s3456_lo, s3456_hi, s789A_lo, s789A_hi, |
| filter, round_offset_vec); |
| |
| uint16x8_t dd0, dd1, dd2, dd3; |
| load_u16_8x4(d, dst_stride, &dd0, &dd1, &dd2, &dd3); |
| |
| uint8x8_t d0_u8, d1_u8, d2_u8, d3_u8; |
| compute_basic_avg_8x4(dd0, dd1, dd2, dd3, d0, d1, d2, d3, |
| round_offset_vec, &d0_u8, &d1_u8, &d2_u8, &d3_u8); |
| |
| store_u8_8x4(d_u8, dst8_stride, d0_u8, d1_u8, d2_u8, d3_u8); |
| |
| // Prepare block for next iteration - re-using as much as possible. |
| // Shuffle everything up four rows. |
| s0123_lo = s4567_lo; |
| s0123_hi = s4567_hi; |
| s1234_lo = s5678_lo; |
| s1234_hi = s5678_hi; |
| s2345_lo = s6789_lo; |
| s2345_hi = s6789_hi; |
| s3456_lo = s789A_lo; |
| s3456_hi = s789A_hi; |
| |
| s += 4 * src_stride; |
| d += 4 * dst_stride; |
| d_u8 += 4 * dst8_stride; |
| height -= 4; |
| } while (height != 0); |
| src_ptr += 8; |
| dst_ptr += 8; |
| dst8_ptr += 8; |
| w -= 8; |
| } while (w != 0); |
| } |
| } |
| |
| static inline int16x4_t convolve4_4_y(const int8x16_t s0, |
| const int8x8_t filters) { |
| // The sample range transform and permutation are performed by the caller. |
| // Accumulate into 128 << FILTER_BITS to account for range transform. |
| // (- 1 since we halved the filters.) |
| const int32x4_t acc = vdupq_n_s32(128 << (FILTER_BITS - 1)); |
| |
| int32x4_t sum = vdotq_lane_s32(acc, s0, filters, 0); |
| |
| // Further narrowing and packing is performed by the caller. |
| return vmovn_s32(sum); |
| } |
| |
| static inline uint16x8_t convolve4_8_y(const int8x16_t s0, const int8x16_t s1, |
| const int8x8_t filters, |
| const int16x8_t round_offset) { |
| // The sample range transform and permutation are performed by the caller. |
| // Accumulate into 128 << FILTER_BITS to account for range transform. |
| // (- 1 since we halved the filters.) |
| const int32x4_t acc = vdupq_n_s32(128 << (FILTER_BITS - 1)); |
| |
| int32x4_t sum0123 = vdotq_lane_s32(acc, s0, filters, 0); |
| int32x4_t sum4567 = vdotq_lane_s32(acc, s1, filters, 0); |
| |
| // Narrow and re-pack. |
| int16x8_t sum = vcombine_s16(vmovn_s32(sum0123), vmovn_s32(sum4567)); |
| |
| // We halved the filter values so -1 from right shift. |
| return vreinterpretq_u16_s16( |
| vrsraq_n_s16(round_offset, sum, ROUND0_BITS - 1)); |
| } |
| |
| static inline void dist_wtd_convolve_y_4tap_neon_dotprod( |
| const uint8_t *src_ptr, int src_stride, int w, int h, |
| const int16_t *y_filter_ptr, ConvolveParams *conv_params) { |
| const int bd = 8; |
| const int offset_bits = bd + 2 * FILTER_BITS - ROUND0_BITS; |
| const int16_t round_offset = (1 << (offset_bits - COMPOUND_ROUND1_BITS)) + |
| (1 << (offset_bits - COMPOUND_ROUND1_BITS - 1)); |
| const int16x8_t round_offset_vec = vdupq_n_s16(round_offset); |
| |
| CONV_BUF_TYPE *dst_ptr = conv_params->dst; |
| const int dst_stride = conv_params->dst_stride; |
| |
| // Filter values are even, so halve to reduce intermediate precision reqs. |
| const int16x8_t filter_s16 = |
| vcombine_s16(vld1_s16(y_filter_ptr + 2), vdup_n_s16(0)); |
| const int8x8_t filter = vshrn_n_s16(filter_s16, 1); |
| const uint8x16x3_t merge_block_tbl = vld1q_u8_x3(kDotProdMergeBlockTbl); |
| int8x16x2_t samples_LUT; |
| |
| if (w == 4) { |
| uint8x8_t t0, t1, t2, t3; |
| load_u8_8x4(src_ptr, src_stride, &t0, &t1, &t2, &t3); |
| src_ptr += 4 * src_stride; |
| |
| // Transform sample range to [-128, 127] for 8-bit signed dot product. |
| int8x8_t s0 = vreinterpret_s8_u8(vsub_u8(t0, vdup_n_u8(128))); |
| int8x8_t s1 = vreinterpret_s8_u8(vsub_u8(t1, vdup_n_u8(128))); |
| int8x8_t s2 = vreinterpret_s8_u8(vsub_u8(t2, vdup_n_u8(128))); |
| int8x8_t s3 = vreinterpret_s8_u8(vsub_u8(t3, vdup_n_u8(128))); |
| |
| // This operation combines a conventional transpose and the sample permute |
| // required before computing the dot product. |
| int8x16_t s0123; |
| transpose_concat_elems_s8_4x4(s0, s1, s2, s3, &s0123); |
| |
| do { |
| uint8x8_t t4, t5, t6, t7; |
| load_u8_8x4(src_ptr, src_stride, &t4, &t5, &t6, &t7); |
| |
| int8x8_t s4 = vreinterpret_s8_u8(vsub_u8(t4, vdup_n_u8(128))); |
| int8x8_t s5 = vreinterpret_s8_u8(vsub_u8(t5, vdup_n_u8(128))); |
| int8x8_t s6 = vreinterpret_s8_u8(vsub_u8(t6, vdup_n_u8(128))); |
| int8x8_t s7 = vreinterpret_s8_u8(vsub_u8(t7, vdup_n_u8(128))); |
| |
| int8x16_t s4567; |
| transpose_concat_elems_s8_4x4(s4, s5, s6, s7, &s4567); |
| |
| // Merge new data into block from previous iteration. |
| samples_LUT.val[0] = s0123; |
| samples_LUT.val[1] = s4567; |
| int8x16_t s1234 = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[0]); |
| int8x16_t s2345 = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[1]); |
| int8x16_t s3456 = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[2]); |
| |
| int16x4_t d0 = convolve4_4_y(s0123, filter); |
| int16x4_t d1 = convolve4_4_y(s1234, filter); |
| int16x4_t d2 = convolve4_4_y(s2345, filter); |
| int16x4_t d3 = convolve4_4_y(s3456, filter); |
| |
| // We halved the filter values so -1 from right shift. |
| int16x8_t d01 = |
| vrsraq_n_s16(round_offset_vec, vcombine_s16(d0, d1), ROUND0_BITS - 1); |
| int16x8_t d23 = |
| vrsraq_n_s16(round_offset_vec, vcombine_s16(d2, d3), ROUND0_BITS - 1); |
| |
| store_u16x4_strided_x2(dst_ptr + 0 * dst_stride, dst_stride, |
| vreinterpretq_u16_s16(d01)); |
| store_u16x4_strided_x2(dst_ptr + 2 * dst_stride, dst_stride, |
| vreinterpretq_u16_s16(d23)); |
| |
| // Prepare block for next iteration - re-using as much as possible. |
| // Shuffle everything up four rows. |
| s0123 = s4567; |
| |
| src_ptr += 4 * src_stride; |
| dst_ptr += 4 * dst_stride; |
| h -= 4; |
| } while (h != 0); |
| } else { |
| do { |
| int height = h; |
| const uint8_t *s = src_ptr; |
| CONV_BUF_TYPE *d = dst_ptr; |
| |
| uint8x8_t t0, t1, t2, t3; |
| load_u8_8x4(s, src_stride, &t0, &t1, &t2, &t3); |
| s += 4 * src_stride; |
| |
| // Transform sample range to [-128, 127] for 8-bit signed dot product. |
| int8x8_t s0 = vreinterpret_s8_u8(vsub_u8(t0, vdup_n_u8(128))); |
| int8x8_t s1 = vreinterpret_s8_u8(vsub_u8(t1, vdup_n_u8(128))); |
| int8x8_t s2 = vreinterpret_s8_u8(vsub_u8(t2, vdup_n_u8(128))); |
| int8x8_t s3 = vreinterpret_s8_u8(vsub_u8(t3, vdup_n_u8(128))); |
| |
| // This operation combines a conventional transpose and the sample permute |
| // required before computing the dot product. |
| int8x16_t s0123_lo, s0123_hi; |
| transpose_concat_elems_s8_8x4(s0, s1, s2, s3, &s0123_lo, &s0123_hi); |
| |
| do { |
| uint8x8_t t4, t5, t6, t7; |
| load_u8_8x4(s, src_stride, &t4, &t5, &t6, &t7); |
| |
| int8x8_t s4 = vreinterpret_s8_u8(vsub_u8(t4, vdup_n_u8(128))); |
| int8x8_t s5 = vreinterpret_s8_u8(vsub_u8(t5, vdup_n_u8(128))); |
| int8x8_t s6 = vreinterpret_s8_u8(vsub_u8(t6, vdup_n_u8(128))); |
| int8x8_t s7 = vreinterpret_s8_u8(vsub_u8(t7, vdup_n_u8(128))); |
| |
| int8x16_t s4567_lo, s4567_hi; |
| transpose_concat_elems_s8_8x4(s4, s5, s6, s7, &s4567_lo, &s4567_hi); |
| |
| // Merge new data into block from previous iteration. |
| samples_LUT.val[0] = s0123_lo; |
| samples_LUT.val[1] = s4567_lo; |
| int8x16_t s1234_lo = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[0]); |
| int8x16_t s2345_lo = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[1]); |
| int8x16_t s3456_lo = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[2]); |
| |
| samples_LUT.val[0] = s0123_hi; |
| samples_LUT.val[1] = s4567_hi; |
| int8x16_t s1234_hi = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[0]); |
| int8x16_t s2345_hi = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[1]); |
| int8x16_t s3456_hi = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[2]); |
| |
| uint16x8_t d0 = |
| convolve4_8_y(s0123_lo, s0123_hi, filter, round_offset_vec); |
| uint16x8_t d1 = |
| convolve4_8_y(s1234_lo, s1234_hi, filter, round_offset_vec); |
| uint16x8_t d2 = |
| convolve4_8_y(s2345_lo, s2345_hi, filter, round_offset_vec); |
| uint16x8_t d3 = |
| convolve4_8_y(s3456_lo, s3456_hi, filter, round_offset_vec); |
| |
| store_u16_8x4(d, dst_stride, d0, d1, d2, d3); |
| |
| // Prepare block for next iteration - re-using as much as possible. |
| // Shuffle everything up four rows. |
| s0123_lo = s4567_lo; |
| s0123_hi = s4567_hi; |
| |
| s += 4 * src_stride; |
| d += 4 * dst_stride; |
| height -= 4; |
| } while (height != 0); |
| src_ptr += 8; |
| dst_ptr += 8; |
| w -= 8; |
| } while (w != 0); |
| } |
| } |
| |
| static inline void dist_wtd_convolve_y_4tap_avg_neon_dotprod( |
| const uint8_t *src_ptr, int src_stride, uint8_t *dst8_ptr, |
| const int dst8_stride, int w, int h, const int16_t *y_filter_ptr, |
| ConvolveParams *conv_params) { |
| const int bd = 8; |
| const int offset_bits = bd + 2 * FILTER_BITS - ROUND0_BITS; |
| const int16_t round_offset = (1 << (offset_bits - COMPOUND_ROUND1_BITS)) + |
| (1 << (offset_bits - COMPOUND_ROUND1_BITS - 1)); |
| const int16x8_t round_offset_vec = vdupq_n_s16(round_offset); |
| |
| CONV_BUF_TYPE *dst_ptr = conv_params->dst; |
| const int dst_stride = conv_params->dst_stride; |
| |
| // Filter values are even, so halve to reduce intermediate precision reqs. |
| const int16x8_t filter_s16 = |
| vcombine_s16(vld1_s16(y_filter_ptr + 2), vdup_n_s16(0)); |
| const int8x8_t filter = vshrn_n_s16(filter_s16, 1); |
| const uint8x16x3_t merge_block_tbl = vld1q_u8_x3(kDotProdMergeBlockTbl); |
| int8x16x2_t samples_LUT; |
| |
| if (w == 4) { |
| uint8x8_t t0, t1, t2, t3; |
| load_u8_8x4(src_ptr, src_stride, &t0, &t1, &t2, &t3); |
| src_ptr += 4 * src_stride; |
| |
| // Transform sample range to [-128, 127] for 8-bit signed dot product. |
| int8x8_t s0 = vreinterpret_s8_u8(vsub_u8(t0, vdup_n_u8(128))); |
| int8x8_t s1 = vreinterpret_s8_u8(vsub_u8(t1, vdup_n_u8(128))); |
| int8x8_t s2 = vreinterpret_s8_u8(vsub_u8(t2, vdup_n_u8(128))); |
| int8x8_t s3 = vreinterpret_s8_u8(vsub_u8(t3, vdup_n_u8(128))); |
| |
| // This operation combines a conventional transpose and the sample permute |
| // required before computing the dot product. |
| int8x16_t s0123; |
| transpose_concat_elems_s8_4x4(s0, s1, s2, s3, &s0123); |
| |
| do { |
| uint8x8_t t4, t5, t6, t7; |
| load_u8_8x4(src_ptr, src_stride, &t4, &t5, &t6, &t7); |
| |
| int8x8_t s4 = vreinterpret_s8_u8(vsub_u8(t4, vdup_n_u8(128))); |
| int8x8_t s5 = vreinterpret_s8_u8(vsub_u8(t5, vdup_n_u8(128))); |
| int8x8_t s6 = vreinterpret_s8_u8(vsub_u8(t6, vdup_n_u8(128))); |
| int8x8_t s7 = vreinterpret_s8_u8(vsub_u8(t7, vdup_n_u8(128))); |
| |
| int8x16_t s4567; |
| transpose_concat_elems_s8_4x4(s4, s5, s6, s7, &s4567); |
| |
| // Merge new data into block from previous iteration. |
| samples_LUT.val[0] = s0123; |
| samples_LUT.val[1] = s4567; |
| int8x16_t s1234 = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[0]); |
| int8x16_t s2345 = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[1]); |
| int8x16_t s3456 = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[2]); |
| |
| int16x4_t d0 = convolve4_4_y(s0123, filter); |
| int16x4_t d1 = convolve4_4_y(s1234, filter); |
| int16x4_t d2 = convolve4_4_y(s2345, filter); |
| int16x4_t d3 = convolve4_4_y(s3456, filter); |
| |
| // We halved the filter values so -1 from right shift. |
| uint16x8_t d01 = vreinterpretq_u16_s16(vrsraq_n_s16( |
| round_offset_vec, vcombine_s16(d0, d1), ROUND0_BITS - 1)); |
| uint16x8_t d23 = vreinterpretq_u16_s16(vrsraq_n_s16( |
| round_offset_vec, vcombine_s16(d2, d3), ROUND0_BITS - 1)); |
| |
| uint16x4_t dd0, dd1, dd2, dd3; |
| load_u16_4x4(dst_ptr, dst_stride, &dd0, &dd1, &dd2, &dd3); |
| |
| uint8x8_t d0_u8, d1_u8; |
| compute_basic_avg_8x2(vcombine_u16(dd0, dd1), vcombine_u16(dd2, dd3), d01, |
| d23, round_offset_vec, &d0_u8, &d1_u8); |
| |
| store_u8x4_strided_x2(dst8_ptr + 0 * dst8_stride, dst8_stride, d0_u8); |
| store_u8x4_strided_x2(dst8_ptr + 2 * dst8_stride, dst8_stride, d1_u8); |
| |
| // Prepare block for next iteration - re-using as much as possible. |
| // Shuffle everything up four rows. |
| s0123 = s4567; |
| |
| src_ptr += 4 * src_stride; |
| dst_ptr += 4 * dst_stride; |
| dst8_ptr += 4 * dst8_stride; |
| h -= 4; |
| } while (h != 0); |
| } else { |
| do { |
| int height = h; |
| const uint8_t *s = src_ptr; |
| CONV_BUF_TYPE *d = dst_ptr; |
| uint8_t *d_u8 = dst8_ptr; |
| |
| uint8x8_t t0, t1, t2, t3; |
| load_u8_8x4(s, src_stride, &t0, &t1, &t2, &t3); |
| s += 4 * src_stride; |
| |
| // Transform sample range to [-128, 127] for 8-bit signed dot product. |
| int8x8_t s0 = vreinterpret_s8_u8(vsub_u8(t0, vdup_n_u8(128))); |
| int8x8_t s1 = vreinterpret_s8_u8(vsub_u8(t1, vdup_n_u8(128))); |
| int8x8_t s2 = vreinterpret_s8_u8(vsub_u8(t2, vdup_n_u8(128))); |
| int8x8_t s3 = vreinterpret_s8_u8(vsub_u8(t3, vdup_n_u8(128))); |
| |
| // This operation combines a conventional transpose and the sample permute |
| // required before computing the dot product. |
| int8x16_t s0123_lo, s0123_hi; |
| transpose_concat_elems_s8_8x4(s0, s1, s2, s3, &s0123_lo, &s0123_hi); |
| |
| do { |
| uint8x8_t t4, t5, t6, t7; |
| load_u8_8x4(s, src_stride, &t4, &t5, &t6, &t7); |
| |
| int8x8_t s4 = vreinterpret_s8_u8(vsub_u8(t4, vdup_n_u8(128))); |
| int8x8_t s5 = vreinterpret_s8_u8(vsub_u8(t5, vdup_n_u8(128))); |
| int8x8_t s6 = vreinterpret_s8_u8(vsub_u8(t6, vdup_n_u8(128))); |
| int8x8_t s7 = vreinterpret_s8_u8(vsub_u8(t7, vdup_n_u8(128))); |
| |
| int8x16_t s4567_lo, s4567_hi; |
| transpose_concat_elems_s8_8x4(s4, s5, s6, s7, &s4567_lo, &s4567_hi); |
| |
| // Merge new data into block from previous iteration. |
| samples_LUT.val[0] = s0123_lo; |
| samples_LUT.val[1] = s4567_lo; |
| int8x16_t s1234_lo = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[0]); |
| int8x16_t s2345_lo = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[1]); |
| int8x16_t s3456_lo = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[2]); |
| |
| samples_LUT.val[0] = s0123_hi; |
| samples_LUT.val[1] = s4567_hi; |
| int8x16_t s1234_hi = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[0]); |
| int8x16_t s2345_hi = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[1]); |
| int8x16_t s3456_hi = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[2]); |
| |
| uint16x8_t d0 = |
| convolve4_8_y(s0123_lo, s0123_hi, filter, round_offset_vec); |
| uint16x8_t d1 = |
| convolve4_8_y(s1234_lo, s1234_hi, filter, round_offset_vec); |
| uint16x8_t d2 = |
| convolve4_8_y(s2345_lo, s2345_hi, filter, round_offset_vec); |
| uint16x8_t d3 = |
| convolve4_8_y(s3456_lo, s3456_hi, filter, round_offset_vec); |
| |
| uint16x8_t dd0, dd1, dd2, dd3; |
| load_u16_8x4(d, dst_stride, &dd0, &dd1, &dd2, &dd3); |
| |
| uint8x8_t d0_u8, d1_u8, d2_u8, d3_u8; |
| compute_basic_avg_8x4(dd0, dd1, dd2, dd3, d0, d1, d2, d3, |
| round_offset_vec, &d0_u8, &d1_u8, &d2_u8, &d3_u8); |
| |
| store_u8_8x4(d_u8, dst8_stride, d0_u8, d1_u8, d2_u8, d3_u8); |
| |
| // Prepare block for next iteration - re-using as much as possible. |
| // Shuffle everything up four rows. |
| s0123_lo = s4567_lo; |
| s0123_hi = s4567_hi; |
| |
| s += 4 * src_stride; |
| d += 4 * dst_stride; |
| d_u8 += 4 * dst8_stride; |
| height -= 4; |
| } while (height != 0); |
| src_ptr += 8; |
| dst_ptr += 8; |
| dst8_ptr += 8; |
| w -= 8; |
| } while (w != 0); |
| } |
| } |
| |
| static inline void dist_wtd_convolve_y_4tap_dist_wtd_avg_neon_dotprod( |
| const uint8_t *src_ptr, int src_stride, uint8_t *dst8_ptr, |
| const int dst8_stride, int w, int h, const int16_t *y_filter_ptr, |
| ConvolveParams *conv_params) { |
| const int bd = 8; |
| const int offset_bits = bd + 2 * FILTER_BITS - ROUND0_BITS; |
| const int16_t round_offset = (1 << (offset_bits - COMPOUND_ROUND1_BITS)) + |
| (1 << (offset_bits - COMPOUND_ROUND1_BITS - 1)); |
| const int16x8_t round_offset_vec = vdupq_n_s16(round_offset); |
| |
| const uint16_t fwd_offset = conv_params->fwd_offset; |
| const uint16_t bck_offset = conv_params->bck_offset; |
| |
| CONV_BUF_TYPE *dst_ptr = conv_params->dst; |
| const int dst_stride = conv_params->dst_stride; |
| |
| // Filter values are even, so halve to reduce intermediate precision reqs. |
| const int16x8_t filter_s16 = |
| vcombine_s16(vld1_s16(y_filter_ptr + 2), vdup_n_s16(0)); |
| const int8x8_t filter = vshrn_n_s16(filter_s16, 1); |
| const uint8x16x3_t merge_block_tbl = vld1q_u8_x3(kDotProdMergeBlockTbl); |
| int8x16x2_t samples_LUT; |
| |
| if (w == 4) { |
| uint8x8_t t0, t1, t2, t3; |
| load_u8_8x4(src_ptr, src_stride, &t0, &t1, &t2, &t3); |
| src_ptr += 4 * src_stride; |
| |
| // Transform sample range to [-128, 127] for 8-bit signed dot product. |
| int8x8_t s0 = vreinterpret_s8_u8(vsub_u8(t0, vdup_n_u8(128))); |
| int8x8_t s1 = vreinterpret_s8_u8(vsub_u8(t1, vdup_n_u8(128))); |
| int8x8_t s2 = vreinterpret_s8_u8(vsub_u8(t2, vdup_n_u8(128))); |
| int8x8_t s3 = vreinterpret_s8_u8(vsub_u8(t3, vdup_n_u8(128))); |
| |
| // This operation combines a conventional transpose and the sample permute |
| // required before computing the dot product. |
| int8x16_t s0123; |
| transpose_concat_elems_s8_4x4(s0, s1, s2, s3, &s0123); |
| |
| do { |
| uint8x8_t t4, t5, t6, t7; |
| load_u8_8x4(src_ptr, src_stride, &t4, &t5, &t6, &t7); |
| |
| int8x8_t s4 = vreinterpret_s8_u8(vsub_u8(t4, vdup_n_u8(128))); |
| int8x8_t s5 = vreinterpret_s8_u8(vsub_u8(t5, vdup_n_u8(128))); |
| int8x8_t s6 = vreinterpret_s8_u8(vsub_u8(t6, vdup_n_u8(128))); |
| int8x8_t s7 = vreinterpret_s8_u8(vsub_u8(t7, vdup_n_u8(128))); |
| |
| int8x16_t s4567; |
| transpose_concat_elems_s8_4x4(s4, s5, s6, s7, &s4567); |
| |
| // Merge new data into block from previous iteration. |
| samples_LUT.val[0] = s0123; |
| samples_LUT.val[1] = s4567; |
| int8x16_t s1234 = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[0]); |
| int8x16_t s2345 = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[1]); |
| int8x16_t s3456 = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[2]); |
| |
| int16x4_t d0 = convolve4_4_y(s0123, filter); |
| int16x4_t d1 = convolve4_4_y(s1234, filter); |
| int16x4_t d2 = convolve4_4_y(s2345, filter); |
| int16x4_t d3 = convolve4_4_y(s3456, filter); |
| |
| // We halved the filter values so -1 from right shift. |
| uint16x8_t d01 = vreinterpretq_u16_s16(vrsraq_n_s16( |
| round_offset_vec, vcombine_s16(d0, d1), ROUND0_BITS - 1)); |
| uint16x8_t d23 = vreinterpretq_u16_s16(vrsraq_n_s16( |
| round_offset_vec, vcombine_s16(d2, d3), ROUND0_BITS - 1)); |
| |
| uint16x4_t dd0, dd1, dd2, dd3; |
| load_u16_4x4(dst_ptr, dst_stride, &dd0, &dd1, &dd2, &dd3); |
| |
| uint8x8_t d0_u8, d1_u8; |
| compute_dist_wtd_avg_8x2(vcombine_u16(dd0, dd1), vcombine_u16(dd2, dd3), |
| d01, d23, fwd_offset, bck_offset, |
| round_offset_vec, &d0_u8, &d1_u8); |
| |
| store_u8x4_strided_x2(dst8_ptr + 0 * dst8_stride, dst8_stride, d0_u8); |
| store_u8x4_strided_x2(dst8_ptr + 2 * dst8_stride, dst8_stride, d1_u8); |
| |
| // Prepare block for next iteration - re-using as much as possible. |
| // Shuffle everything up four rows. |
| s0123 = s4567; |
| |
| src_ptr += 4 * src_stride; |
| dst_ptr += 4 * dst_stride; |
| dst8_ptr += 4 * dst8_stride; |
| h -= 4; |
| } while (h != 0); |
| } else { |
| do { |
| int height = h; |
| const uint8_t *s = src_ptr; |
| CONV_BUF_TYPE *d = dst_ptr; |
| uint8_t *d_u8 = dst8_ptr; |
| |
| uint8x8_t t0, t1, t2, t3; |
| load_u8_8x4(s, src_stride, &t0, &t1, &t2, &t3); |
| s += 4 * src_stride; |
| |
| // Transform sample range to [-128, 127] for 8-bit signed dot product. |
| int8x8_t s0 = vreinterpret_s8_u8(vsub_u8(t0, vdup_n_u8(128))); |
| int8x8_t s1 = vreinterpret_s8_u8(vsub_u8(t1, vdup_n_u8(128))); |
| int8x8_t s2 = vreinterpret_s8_u8(vsub_u8(t2, vdup_n_u8(128))); |
| int8x8_t s3 = vreinterpret_s8_u8(vsub_u8(t3, vdup_n_u8(128))); |
| |
| // This operation combines a conventional transpose and the sample permute |
| // required before computing the dot product. |
| int8x16_t s0123_lo, s0123_hi; |
| transpose_concat_elems_s8_8x4(s0, s1, s2, s3, &s0123_lo, &s0123_hi); |
| |
| do { |
| uint8x8_t t4, t5, t6, t7; |
| load_u8_8x4(s, src_stride, &t4, &t5, &t6, &t7); |
| |
| int8x8_t s4 = vreinterpret_s8_u8(vsub_u8(t4, vdup_n_u8(128))); |
| int8x8_t s5 = vreinterpret_s8_u8(vsub_u8(t5, vdup_n_u8(128))); |
| int8x8_t s6 = vreinterpret_s8_u8(vsub_u8(t6, vdup_n_u8(128))); |
| int8x8_t s7 = vreinterpret_s8_u8(vsub_u8(t7, vdup_n_u8(128))); |
| |
| int8x16_t s4567_lo, s4567_hi; |
| transpose_concat_elems_s8_8x4(s4, s5, s6, s7, &s4567_lo, &s4567_hi); |
| |
| // Merge new data into block from previous iteration. |
| samples_LUT.val[0] = s0123_lo; |
| samples_LUT.val[1] = s4567_lo; |
| int8x16_t s1234_lo = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[0]); |
| int8x16_t s2345_lo = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[1]); |
| int8x16_t s3456_lo = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[2]); |
| |
| samples_LUT.val[0] = s0123_hi; |
| samples_LUT.val[1] = s4567_hi; |
| int8x16_t s1234_hi = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[0]); |
| int8x16_t s2345_hi = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[1]); |
| int8x16_t s3456_hi = vqtbl2q_s8(samples_LUT, merge_block_tbl.val[2]); |
| |
| uint16x8_t d0 = |
| convolve4_8_y(s0123_lo, s0123_hi, filter, round_offset_vec); |
| uint16x8_t d1 = |
| convolve4_8_y(s1234_lo, s1234_hi, filter, round_offset_vec); |
| uint16x8_t d2 = |
| convolve4_8_y(s2345_lo, s2345_hi, filter, round_offset_vec); |
| uint16x8_t d3 = |
| convolve4_8_y(s3456_lo, s3456_hi, filter, round_offset_vec); |
| |
| uint16x8_t dd0, dd1, dd2, dd3; |
| load_u16_8x4(d, dst_stride, &dd0, &dd1, &dd2, &dd3); |
| |
| uint8x8_t d0_u8, d1_u8, d2_u8, d3_u8; |
| compute_dist_wtd_avg_8x4(dd0, dd1, dd2, dd3, d0, d1, d2, d3, fwd_offset, |
| bck_offset, round_offset_vec, &d0_u8, &d1_u8, |
| &d2_u8, &d3_u8); |
| |
| store_u8_8x4(d_u8, dst8_stride, d0_u8, d1_u8, d2_u8, d3_u8); |
| |
| // Prepare block for next iteration - re-using as much as possible. |
| // Shuffle everything up four rows. |
| s0123_lo = s4567_lo; |
| s0123_hi = s4567_hi; |
| |
| s += 4 * src_stride; |
| d += 4 * dst_stride; |
| d_u8 += 4 * dst8_stride; |
| height -= 4; |
| } while (height != 0); |
| src_ptr += 8; |
| dst_ptr += 8; |
| dst8_ptr += 8; |
| w -= 8; |
| } while (w != 0); |
| } |
| } |
| |
| void av1_dist_wtd_convolve_y_neon_dotprod( |
| const uint8_t *src, int src_stride, uint8_t *dst8, int dst8_stride, int w, |
| int h, const InterpFilterParams *filter_params_y, const int subpel_y_qn, |
| ConvolveParams *conv_params) { |
| assert(w % 4 == 0); |
| assert(h % 4 == 0); |
| |
| const int16_t *y_filter_ptr = av1_get_interp_filter_subpel_kernel( |
| filter_params_y, subpel_y_qn & SUBPEL_MASK); |
| |
| if (get_filter_tap(filter_params_y, subpel_y_qn) <= 4) { |
| if (conv_params->do_average) { |
| if (UNLIKELY(conv_params->use_dist_wtd_comp_avg)) { |
| dist_wtd_convolve_y_4tap_dist_wtd_avg_neon_dotprod( |
| src - src_stride, src_stride, dst8, dst8_stride, w, h, y_filter_ptr, |
| conv_params); |
| } else { |
| dist_wtd_convolve_y_4tap_avg_neon_dotprod(src - src_stride, src_stride, |
| dst8, dst8_stride, w, h, |
| y_filter_ptr, conv_params); |
| } |
| } else { |
| dist_wtd_convolve_y_4tap_neon_dotprod(src - src_stride, src_stride, w, h, |
| y_filter_ptr, conv_params); |
| } |
| } else { // filter tap >= 6 |
| if (conv_params->do_average) { |
| if (UNLIKELY(conv_params->use_dist_wtd_comp_avg)) { |
| dist_wtd_convolve_y_8tap_dist_wtd_avg_neon_dotprod( |
| src - 3 * src_stride, src_stride, dst8, dst8_stride, w, h, |
| y_filter_ptr, conv_params); |
| } else { |
| dist_wtd_convolve_y_8tap_avg_neon_dotprod( |
| src - 3 * src_stride, src_stride, dst8, dst8_stride, w, h, |
| y_filter_ptr, conv_params); |
| } |
| } else { |
| dist_wtd_convolve_y_8tap_neon_dotprod(src - 3 * src_stride, src_stride, w, |
| h, y_filter_ptr, conv_params); |
| } |
| } |
| } |
