| /* | 
 |  * Copyright (c) 2016, Alliance for Open Media. All rights reserved. | 
 |  * | 
 |  * This source code is subject to the terms of the BSD 2 Clause License and | 
 |  * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License | 
 |  * was not distributed with this source code in the LICENSE file, you can | 
 |  * obtain it at www.aomedia.org/license/software. If the Alliance for Open | 
 |  * Media Patent License 1.0 was not distributed with this source code in the | 
 |  * PATENTS file, you can obtain it at www.aomedia.org/license/patent. | 
 |  */ | 
 |  | 
 | #ifndef AOM_AV1_COMMON_RECONINTRA_H_ | 
 | #define AOM_AV1_COMMON_RECONINTRA_H_ | 
 |  | 
 | #include <stdlib.h> | 
 |  | 
 | #include "aom/aom_integer.h" | 
 | #include "av1/common/av1_common_int.h" | 
 | #include "av1/common/blockd.h" | 
 |  | 
 | #ifdef __cplusplus | 
 | extern "C" { | 
 | #endif | 
 |  | 
 | void av1_init_intra_predictors(void); | 
 | void av1_predict_intra_block_facade(const AV1_COMMON *cm, MACROBLOCKD *xd, | 
 |                                     int plane, int blk_col, int blk_row, | 
 |                                     TX_SIZE tx_size); | 
 | void av1_predict_intra_block(const MACROBLOCKD *xd, BLOCK_SIZE sb_size, | 
 |                              int enable_intra_edge_filter, int wpx, int hpx, | 
 |                              TX_SIZE tx_size, PREDICTION_MODE mode, | 
 |                              int angle_delta, int use_palette, | 
 |                              FILTER_INTRA_MODE filter_intra_mode, | 
 |                              const uint8_t *ref, int ref_stride, uint8_t *dst, | 
 |                              int dst_stride, int col_off, int row_off, | 
 |                              int plane); | 
 |  | 
 | // Mapping of interintra to intra mode for use in the intra component | 
 | static const PREDICTION_MODE interintra_to_intra_mode[INTERINTRA_MODES] = { | 
 |   DC_PRED, V_PRED, H_PRED, SMOOTH_PRED | 
 | }; | 
 |  | 
 | // Mapping of intra mode to the interintra mode | 
 | static const INTERINTRA_MODE intra_to_interintra_mode[INTRA_MODES] = { | 
 |   II_DC_PRED, II_V_PRED, II_H_PRED, II_V_PRED,      II_SMOOTH_PRED, II_V_PRED, | 
 |   II_H_PRED,  II_H_PRED, II_V_PRED, II_SMOOTH_PRED, II_SMOOTH_PRED | 
 | }; | 
 |  | 
 | #define FILTER_INTRA_SCALE_BITS 4 | 
 |  | 
 | static inline int av1_is_directional_mode(PREDICTION_MODE mode) { | 
 |   return mode >= V_PRED && mode <= D67_PRED; | 
 | } | 
 |  | 
 | static inline int av1_is_diagonal_mode(PREDICTION_MODE mode) { | 
 |   return mode >= D45_PRED && mode <= D67_PRED; | 
 | } | 
 |  | 
 | static inline int av1_use_angle_delta(BLOCK_SIZE bsize) { | 
 |   return bsize >= BLOCK_8X8; | 
 | } | 
 |  | 
 | static inline int av1_allow_intrabc(const AV1_COMMON *const cm) { | 
 |   return frame_is_intra_only(cm) && cm->features.allow_screen_content_tools && | 
 |          cm->features.allow_intrabc; | 
 | } | 
 |  | 
 | static inline int av1_filter_intra_allowed_bsize(const AV1_COMMON *const cm, | 
 |                                                  BLOCK_SIZE bs) { | 
 |   if (!cm->seq_params->enable_filter_intra || bs == BLOCK_INVALID) return 0; | 
 |  | 
 |   return block_size_wide[bs] <= 32 && block_size_high[bs] <= 32; | 
 | } | 
 |  | 
 | static inline int av1_filter_intra_allowed(const AV1_COMMON *const cm, | 
 |                                            const MB_MODE_INFO *mbmi) { | 
 |   return mbmi->mode == DC_PRED && | 
 |          mbmi->palette_mode_info.palette_size[0] == 0 && | 
 |          av1_filter_intra_allowed_bsize(cm, mbmi->bsize); | 
 | } | 
 |  | 
 | extern const int8_t av1_filter_intra_taps[FILTER_INTRA_MODES][8][8]; | 
 |  | 
 | static const int16_t dr_intra_derivative[90] = { | 
 |   // More evenly spread out angles and limited to 10-bit | 
 |   // Values that are 0 will never be used | 
 |   //                    Approx angle | 
 |   0,    0, 0,        // | 
 |   1023, 0, 0,        // 3, ... | 
 |   547,  0, 0,        // 6, ... | 
 |   372,  0, 0, 0, 0,  // 9, ... | 
 |   273,  0, 0,        // 14, ... | 
 |   215,  0, 0,        // 17, ... | 
 |   178,  0, 0,        // 20, ... | 
 |   151,  0, 0,        // 23, ... (113 & 203 are base angles) | 
 |   132,  0, 0,        // 26, ... | 
 |   116,  0, 0,        // 29, ... | 
 |   102,  0, 0, 0,     // 32, ... | 
 |   90,   0, 0,        // 36, ... | 
 |   80,   0, 0,        // 39, ... | 
 |   71,   0, 0,        // 42, ... | 
 |   64,   0, 0,        // 45, ... (45 & 135 are base angles) | 
 |   57,   0, 0,        // 48, ... | 
 |   51,   0, 0,        // 51, ... | 
 |   45,   0, 0, 0,     // 54, ... | 
 |   40,   0, 0,        // 58, ... | 
 |   35,   0, 0,        // 61, ... | 
 |   31,   0, 0,        // 64, ... | 
 |   27,   0, 0,        // 67, ... (67 & 157 are base angles) | 
 |   23,   0, 0,        // 70, ... | 
 |   19,   0, 0,        // 73, ... | 
 |   15,   0, 0, 0, 0,  // 76, ... | 
 |   11,   0, 0,        // 81, ... | 
 |   7,    0, 0,        // 84, ... | 
 |   3,    0, 0,        // 87, ... | 
 | }; | 
 |  | 
 | // Get the shift (up-scaled by 256) in X w.r.t a unit change in Y. | 
 | // If angle > 0 && angle < 90, dx = -((int)(256 / t)); | 
 | // If angle > 90 && angle < 180, dx = (int)(256 / t); | 
 | // If angle > 180 && angle < 270, dx = 1; | 
 | static inline int av1_get_dx(int angle) { | 
 |   if (angle > 0 && angle < 90) { | 
 |     return dr_intra_derivative[angle]; | 
 |   } else if (angle > 90 && angle < 180) { | 
 |     return dr_intra_derivative[180 - angle]; | 
 |   } else { | 
 |     // In this case, we are not really going to use dx. We may return any value. | 
 |     return 1; | 
 |   } | 
 | } | 
 |  | 
 | // Get the shift (up-scaled by 256) in Y w.r.t a unit change in X. | 
 | // If angle > 0 && angle < 90, dy = 1; | 
 | // If angle > 90 && angle < 180, dy = (int)(256 * t); | 
 | // If angle > 180 && angle < 270, dy = -((int)(256 * t)); | 
 | static inline int av1_get_dy(int angle) { | 
 |   if (angle > 90 && angle < 180) { | 
 |     return dr_intra_derivative[angle - 90]; | 
 |   } else if (angle > 180 && angle < 270) { | 
 |     return dr_intra_derivative[270 - angle]; | 
 |   } else { | 
 |     // In this case, we are not really going to use dy. We may return any value. | 
 |     return 1; | 
 |   } | 
 | } | 
 |  | 
 | static inline int av1_use_intra_edge_upsample(int bs0, int bs1, int delta, | 
 |                                               int type) { | 
 |   const int d = abs(delta); | 
 |   const int blk_wh = bs0 + bs1; | 
 |   if (d == 0 || d >= 40) return 0; | 
 |   return type ? (blk_wh <= 8) : (blk_wh <= 16); | 
 | } | 
 | #ifdef __cplusplus | 
 | }  // extern "C" | 
 | #endif | 
 | #endif  // AOM_AV1_COMMON_RECONINTRA_H_ |