| #!/bin/sh |
| ## Copyright (c) 2016, Alliance for Open Media. All rights reserved |
| ## |
| ## This source code is subject to the terms of the BSD 2 Clause License and |
| ## the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License |
| ## was not distributed with this source code in the LICENSE file, you can |
| ## obtain it at www.aomedia.org/license/software. If the Alliance for Open |
| ## Media Patent License 1.0 was not distributed with this source code in the |
| ## PATENTS file, you can obtain it at www.aomedia.org/license/patent. |
| ## |
| ## This file tests aomenc using hantro_collage_w352h288.yuv as input. To add |
| ## new tests to this file, do the following: |
| ## 1. Write a shell function (this is your test). |
| ## 2. Add the function to aomenc_tests (on a new line). |
| ## |
| . $(dirname $0)/tools_common.sh |
| |
| # Environment check: Make sure input is available. |
| aomenc_verify_environment() { |
| if [ ! -e "${YUV_RAW_INPUT}" ]; then |
| elog "The file ${YUV_RAW_INPUT##*/} must exist in LIBAOM_TEST_DATA_PATH." |
| return 1 |
| fi |
| if [ "$(aomenc_can_encode_av1)" = "yes" ]; then |
| if [ ! -e "${Y4M_NOSQ_PAR_INPUT}" ]; then |
| elog "The file ${Y4M_NOSQ_PAR_INPUT##*/} must exist in" |
| elog "LIBAOM_TEST_DATA_PATH." |
| return 1 |
| fi |
| fi |
| if [ -z "$(aom_tool_path aomenc)" ]; then |
| elog "aomenc not found. It must exist in LIBAOM_BIN_PATH or its parent." |
| return 1 |
| fi |
| } |
| |
| aomenc_can_encode_av1() { |
| if [ "$(av1_encode_available)" = "yes" ]; then |
| echo yes |
| fi |
| } |
| |
| aomenc_can_encode_av1() { |
| if [ "$(av1_encode_available)" = "yes" ]; then |
| echo yes |
| fi |
| } |
| |
| # Utilities that echo aomenc input file parameters. |
| y4m_input_non_square_par() { |
| echo ""${Y4M_NOSQ_PAR_INPUT}"" |
| } |
| |
| y4m_input_720p() { |
| echo ""${Y4M_720P_INPUT}"" |
| } |
| |
| # Wrapper function for running aomenc with pipe input. Requires that |
| # LIBAOM_BIN_PATH points to the directory containing aomenc. $1 is used as the |
| # input file path and shifted away. All remaining parameters are passed through |
| # to aomenc. |
| aomenc_pipe() { |
| local encoder="$(aom_tool_path aomenc)" |
| local input="$1" |
| shift |
| cat "${input}" | eval "${AOM_TEST_PREFIX}" "${encoder}" - \ |
| --test-decode=fatal \ |
| "$@" ${devnull} |
| } |
| |
| # Wrapper function for running aomenc. Requires that LIBAOM_BIN_PATH points to |
| # the directory containing aomenc. $1 one is used as the input file path and |
| # shifted away. All remaining parameters are passed through to aomenc. |
| aomenc() { |
| local encoder="$(aom_tool_path aomenc)" |
| local input="$1" |
| shift |
| eval "${AOM_TEST_PREFIX}" "${encoder}" "${input}" \ |
| --test-decode=fatal \ |
| "$@" ${devnull} |
| } |
| |
| aomenc_av1_ivf() { |
| if [ "$(aomenc_can_encode_av1)" = "yes" ]; then |
| local output="${AV1_IVF_FILE}" |
| if [ -e "${AV1_IVF_FILE}" ]; then |
| output="${AOM_TEST_OUTPUT_DIR}/av1_test.ivf" |
| fi |
| aomenc $(yuv_raw_input) \ |
| $(aomenc_encode_test_fast_params) \ |
| --ivf \ |
| --output="${output}" || return 1 |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| aomenc_av1_ivf_rt() { |
| if [ "$(aomenc_can_encode_av1)" = "yes" ]; then |
| local output="${AV1_IVF_FILE}" |
| if [ -e "${AV1_IVF_FILE}" ]; then |
| output="${AOM_TEST_OUTPUT_DIR}/av1_test.ivf" |
| fi |
| aomenc $(yuv_raw_input) \ |
| $(aomenc_encode_test_rt_params) \ |
| --ivf \ |
| --output="${output}" || return 1 |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| aomenc_av1_ivf_use_16bit_internal() { |
| if [ "$(aomenc_can_encode_av1)" = "yes" ]; then |
| local output="${AV1_IVF_FILE}" |
| if [ -e "${AV1_IVF_FILE}" ]; then |
| output="${AOM_TEST_OUTPUT_DIR}/av1_test_16bit.ivf" |
| fi |
| aomenc $(yuv_raw_input) \ |
| $(aomenc_encode_test_fast_params) \ |
| --ivf \ |
| --use-16bit-internal \ |
| --output="${output}" || return 1 |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| aomenc_av1_obu_annexb() { |
| if [ "$(aomenc_can_encode_av1)" = "yes" ]; then |
| local output="${AV1_OBU_ANNEXB_FILE}" |
| if [ -e "${AV1_OBU_ANNEXB_FILE}" ]; then |
| output="${AOM_TEST_OUTPUT_DIR}/av1_test.annexb.obu" |
| fi |
| aomenc $(yuv_raw_input) \ |
| $(aomenc_encode_test_fast_params) \ |
| --obu \ |
| --annexb=1 \ |
| --output="${output}" || return 1 |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| aomenc_av1_obu_section5() { |
| if [ "$(aomenc_can_encode_av1)" = "yes" ]; then |
| local output="${AV1_OBU_SEC5_FILE}" |
| if [ -e "${AV1_OBU_SEC5_FILE}" ]; then |
| output="${AOM_TEST_OUTPUT_DIR}/av1_test.section5.obu" |
| fi |
| aomenc $(yuv_raw_input) \ |
| $(aomenc_encode_test_fast_params) \ |
| --obu \ |
| --output="${output}" || return 1 |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| aomenc_av1_webm() { |
| if [ "$(aomenc_can_encode_av1)" = "yes" ] && \ |
| [ "$(webm_io_available)" = "yes" ]; then |
| local output="${AV1_WEBM_FILE}" |
| if [ -e "${AV1_WEBM_FILE}" ]; then |
| output="${AOM_TEST_OUTPUT_DIR}/av1_test.webm" |
| fi |
| aomenc $(yuv_raw_input) \ |
| $(aomenc_encode_test_fast_params) \ |
| --output="${output}" || return 1 |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| aomenc_av1_webm_1pass() { |
| if [ "$(aomenc_can_encode_av1)" = "yes" ] && \ |
| [ "$(webm_io_available)" = "yes" ]; then |
| local output="${AOM_TEST_OUTPUT_DIR}/av1_test.webm" |
| aomenc $(yuv_raw_input) \ |
| $(aomenc_encode_test_fast_params) \ |
| --passes=1 \ |
| --output="${output}" || return 1 |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| aomenc_av1_ivf_lossless() { |
| if [ "$(aomenc_can_encode_av1)" = "yes" ]; then |
| local output="${AOM_TEST_OUTPUT_DIR}/av1_lossless.ivf" |
| aomenc $(yuv_raw_input) \ |
| $(aomenc_encode_test_fast_params) \ |
| --ivf \ |
| --output="${output}" \ |
| --lossless=1 || return 1 |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| aomenc_av1_ivf_minq0_maxq0() { |
| if [ "$(aomenc_can_encode_av1)" = "yes" ]; then |
| local output="${AOM_TEST_OUTPUT_DIR}/av1_lossless_minq0_maxq0.ivf" |
| aomenc $(yuv_raw_input) \ |
| $(aomenc_encode_test_fast_params) \ |
| --ivf \ |
| --output="${output}" \ |
| --min-q=0 \ |
| --max-q=0 || return 1 |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| aomenc_av1_webm_lag5_frames10() { |
| if [ "$(aomenc_can_encode_av1)" = "yes" ] && \ |
| [ "$(webm_io_available)" = "yes" ]; then |
| local lag_total_frames=10 |
| local lag_frames=5 |
| local output="${AOM_TEST_OUTPUT_DIR}/av1_lag5_frames10.webm" |
| aomenc $(yuv_raw_input) \ |
| $(aomenc_encode_test_fast_params) \ |
| --limit=${lag_total_frames} \ |
| --lag-in-frames=${lag_frames} \ |
| --output="${output}" || return 1 |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| # TODO(fgalligan): Test that DisplayWidth is different than video width. |
| aomenc_av1_webm_non_square_par() { |
| if [ "$(aomenc_can_encode_av1)" = "yes" ] && \ |
| [ "$(webm_io_available)" = "yes" ]; then |
| local output="${AOM_TEST_OUTPUT_DIR}/av1_non_square_par.webm" |
| aomenc $(y4m_input_non_square_par) \ |
| $(aomenc_encode_test_fast_params) \ |
| --output="${output}" || return 1 |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| fi |
| } |
| |
| aomenc_av1_webm_cdf_update_mode() { |
| if [ "$(aomenc_can_encode_av1)" = "yes" ] && \ |
| [ "$(webm_io_available)" = "yes" ]; then |
| for mode in 0 1 2; do |
| local output="${AOM_TEST_OUTPUT_DIR}/cdf_mode_${mode}.webm" |
| aomenc $(yuv_raw_input) \ |
| $(aomenc_encode_test_fast_params) \ |
| --cdf-update-mode=${mode} \ |
| --output="${output}" || return 1 |
| |
| if [ ! -e "${output}" ]; then |
| elog "Output file does not exist." |
| return 1 |
| fi |
| done |
| fi |
| } |
| |
| if [ "$(realtime_only_build)" = "yes" ]; then |
| aomenc_tests="aomenc_av1_ivf_rt" |
| else |
| aomenc_tests="aomenc_av1_ivf |
| aomenc_av1_ivf_rt |
| aomenc_av1_obu_annexb |
| aomenc_av1_obu_section5 |
| aomenc_av1_webm |
| aomenc_av1_webm_1pass |
| aomenc_av1_ivf_lossless |
| aomenc_av1_ivf_minq0_maxq0 |
| aomenc_av1_ivf_use_16bit_internal |
| aomenc_av1_webm_lag5_frames10 |
| aomenc_av1_webm_non_square_par |
| aomenc_av1_webm_cdf_update_mode" |
| fi |
| |
| run_tests aomenc_verify_environment "${aomenc_tests}" |
