| /* |
| * Copyright (c) 2017, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 2 Clause License and |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License |
| * was not distributed with this source code in the LICENSE file, you can |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open |
| * Media Patent License 1.0 was not distributed with this source code in the |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. |
| */ |
| |
| #include <tuple> |
| #include <vector> |
| |
| #include "third_party/googletest/src/googletest/include/gtest/gtest.h" |
| |
| #include "config/av1_rtcd.h" |
| |
| #include "aom_ports/aom_timer.h" |
| #include "test/acm_random.h" |
| #include "test/clear_system_state.h" |
| #include "test/register_state_check.h" |
| #include "test/util.h" |
| |
| #include "av1/common/common_data.h" |
| |
| namespace { |
| const int kTestIters = 10; |
| const int kPerfIters = 1000; |
| |
| const int kVPad = 32; |
| const int kHPad = 32; |
| const int kXStepQn = 16; |
| const int kYStepQn = 20; |
| |
| using libaom_test::ACMRandom; |
| using std::make_tuple; |
| using std::tuple; |
| |
| enum NTaps { EIGHT_TAP, TEN_TAP, TWELVE_TAP }; |
| int NTapsToInt(NTaps ntaps) { return 8 + static_cast<int>(ntaps) * 2; } |
| |
| // A 16-bit filter with a configurable number of taps. |
| class TestFilter { |
| public: |
| void set(NTaps ntaps, bool backwards); |
| |
| InterpFilterParams params_; |
| |
| private: |
| std::vector<int16_t> coeffs_; |
| }; |
| |
| void TestFilter::set(NTaps ntaps, bool backwards) { |
| const int n = NTapsToInt(ntaps); |
| assert(n >= 8 && n <= 12); |
| |
| // The filter has n * SUBPEL_SHIFTS proper elements and an extra 8 bogus |
| // elements at the end so that convolutions can read off the end safely. |
| coeffs_.resize(n * SUBPEL_SHIFTS + 8); |
| |
| // The coefficients are pretty much arbitrary, but convolutions shouldn't |
| // over or underflow. For the first filter (subpels = 0), we use an |
| // increasing or decreasing ramp (depending on the backwards parameter). We |
| // don't want any zero coefficients, so we make it have an x-intercept at -1 |
| // or n. To ensure absence of under/overflow, we normalise the area under the |
| // ramp to be I = 1 << FILTER_BITS (so that convolving a constant function |
| // gives the identity). |
| // |
| // When increasing, the function has the form: |
| // |
| // f(x) = A * (x + 1) |
| // |
| // Summing and rearranging for A gives A = 2 * I / (n * (n + 1)). If the |
| // filter is reversed, we have the same A but with formula |
| // |
| // g(x) = A * (n - x) |
| const int I = 1 << FILTER_BITS; |
| const float A = 2.f * I / (n * (n + 1.f)); |
| for (int i = 0; i < n; ++i) { |
| coeffs_[i] = static_cast<int16_t>(A * (backwards ? (n - i) : (i + 1))); |
| } |
| |
| // For the other filters, make them slightly different by swapping two |
| // columns. Filter k will have the columns (k % n) and (7 * k) % n swapped. |
| const size_t filter_size = sizeof(coeffs_[0] * n); |
| int16_t *const filter0 = &coeffs_[0]; |
| for (int k = 1; k < SUBPEL_SHIFTS; ++k) { |
| int16_t *filterk = &coeffs_[k * n]; |
| memcpy(filterk, filter0, filter_size); |
| |
| const int idx0 = k % n; |
| const int idx1 = (7 * k) % n; |
| |
| const int16_t tmp = filterk[idx0]; |
| filterk[idx0] = filterk[idx1]; |
| filterk[idx1] = tmp; |
| } |
| |
| // Finally, write some rubbish at the end to make sure we don't use it. |
| for (int i = 0; i < 8; ++i) coeffs_[n * SUBPEL_SHIFTS + i] = 123 + i; |
| |
| // Fill in params |
| params_.filter_ptr = &coeffs_[0]; |
| params_.taps = n; |
| // These are ignored by the functions being tested. Set them to whatever. |
| params_.interp_filter = EIGHTTAP_REGULAR; |
| } |
| |
| template <typename SrcPixel> |
| class TestImage { |
| public: |
| TestImage(int w, int h, int bd) : w_(w), h_(h), bd_(bd) { |
| assert(bd < 16); |
| assert(bd <= 8 * static_cast<int>(sizeof(SrcPixel))); |
| |
| // Pad width by 2*kHPad and then round up to the next multiple of 16 |
| // to get src_stride_. Add another 16 for dst_stride_ (to make sure |
| // something goes wrong if we use the wrong one) |
| src_stride_ = (w_ + 2 * kHPad + 15) & ~15; |
| dst_stride_ = src_stride_ + 16; |
| |
| // Allocate image data |
| src_data_.resize(2 * src_block_size()); |
| dst_data_.resize(2 * dst_block_size()); |
| dst_16_data_.resize(2 * dst_block_size()); |
| } |
| |
| void Initialize(ACMRandom *rnd); |
| void Check() const; |
| |
| int src_stride() const { return src_stride_; } |
| int dst_stride() const { return dst_stride_; } |
| |
| int src_block_size() const { return (h_ + 2 * kVPad) * src_stride(); } |
| int dst_block_size() const { return (h_ + 2 * kVPad) * dst_stride(); } |
| |
| const SrcPixel *GetSrcData(bool ref, bool borders) const { |
| const SrcPixel *block = &src_data_[ref ? 0 : src_block_size()]; |
| return borders ? block : block + kHPad + src_stride_ * kVPad; |
| } |
| |
| SrcPixel *GetDstData(bool ref, bool borders) { |
| SrcPixel *block = &dst_data_[ref ? 0 : dst_block_size()]; |
| return borders ? block : block + kHPad + dst_stride_ * kVPad; |
| } |
| |
| CONV_BUF_TYPE *GetDst16Data(bool ref, bool borders) { |
| CONV_BUF_TYPE *block = &dst_16_data_[ref ? 0 : dst_block_size()]; |
| return borders ? block : block + kHPad + dst_stride_ * kVPad; |
| } |
| |
| private: |
| int w_, h_, bd_; |
| int src_stride_, dst_stride_; |
| |
| std::vector<SrcPixel> src_data_; |
| std::vector<SrcPixel> dst_data_; |
| std::vector<CONV_BUF_TYPE> dst_16_data_; |
| }; |
| |
| template <typename Pixel> |
| void FillEdge(ACMRandom *rnd, int num_pixels, int bd, bool trash, Pixel *data) { |
| if (!trash) { |
| memset(data, 0, sizeof(*data) * num_pixels); |
| return; |
| } |
| const Pixel mask = (1 << bd) - 1; |
| for (int i = 0; i < num_pixels; ++i) data[i] = rnd->Rand16() & mask; |
| } |
| |
| template <typename Pixel> |
| void PrepBuffers(ACMRandom *rnd, int w, int h, int stride, int bd, |
| bool trash_edges, Pixel *data) { |
| assert(rnd); |
| const Pixel mask = (1 << bd) - 1; |
| |
| // Fill in the first buffer with random data |
| // Top border |
| FillEdge(rnd, stride * kVPad, bd, trash_edges, data); |
| for (int r = 0; r < h; ++r) { |
| Pixel *row_data = data + (kVPad + r) * stride; |
| // Left border, contents, right border |
| FillEdge(rnd, kHPad, bd, trash_edges, row_data); |
| for (int c = 0; c < w; ++c) row_data[kHPad + c] = rnd->Rand16() & mask; |
| FillEdge(rnd, kHPad, bd, trash_edges, row_data + kHPad + w); |
| } |
| // Bottom border |
| FillEdge(rnd, stride * kVPad, bd, trash_edges, data + stride * (kVPad + h)); |
| |
| const int bpp = sizeof(*data); |
| const int block_elts = stride * (h + 2 * kVPad); |
| const int block_size = bpp * block_elts; |
| |
| // Now copy that to the second buffer |
| memcpy(data + block_elts, data, block_size); |
| } |
| |
| template <typename SrcPixel> |
| void TestImage<SrcPixel>::Initialize(ACMRandom *rnd) { |
| PrepBuffers(rnd, w_, h_, src_stride_, bd_, false, &src_data_[0]); |
| PrepBuffers(rnd, w_, h_, dst_stride_, bd_, true, &dst_data_[0]); |
| PrepBuffers(rnd, w_, h_, dst_stride_, bd_, true, &dst_16_data_[0]); |
| } |
| |
| template <typename SrcPixel> |
| void TestImage<SrcPixel>::Check() const { |
| // If memcmp returns 0, there's nothing to do. |
| const int num_pixels = dst_block_size(); |
| const SrcPixel *ref_dst = &dst_data_[0]; |
| const SrcPixel *tst_dst = &dst_data_[num_pixels]; |
| |
| const CONV_BUF_TYPE *ref_16_dst = &dst_16_data_[0]; |
| const CONV_BUF_TYPE *tst_16_dst = &dst_16_data_[num_pixels]; |
| |
| if (0 == memcmp(ref_dst, tst_dst, sizeof(*ref_dst) * num_pixels)) { |
| if (0 == memcmp(ref_16_dst, tst_16_dst, sizeof(*ref_16_dst) * num_pixels)) |
| return; |
| } |
| // Otherwise, iterate through the buffer looking for differences (including |
| // the edges) |
| const int stride = dst_stride_; |
| for (int r = 0; r < h_ + 2 * kVPad; ++r) { |
| for (int c = 0; c < w_ + 2 * kHPad; ++c) { |
| const int32_t ref_value = ref_dst[r * stride + c]; |
| const int32_t tst_value = tst_dst[r * stride + c]; |
| |
| EXPECT_EQ(tst_value, ref_value) |
| << "Error at row: " << (r - kVPad) << ", col: " << (c - kHPad); |
| } |
| } |
| |
| for (int r = 0; r < h_ + 2 * kVPad; ++r) { |
| for (int c = 0; c < w_ + 2 * kHPad; ++c) { |
| const int32_t ref_value = ref_16_dst[r * stride + c]; |
| const int32_t tst_value = tst_16_dst[r * stride + c]; |
| |
| EXPECT_EQ(tst_value, ref_value) |
| << "Error in 16 bit buffer " |
| << "Error at row: " << (r - kVPad) << ", col: " << (c - kHPad); |
| } |
| } |
| } |
| |
| typedef tuple<int, int> BlockDimension; |
| |
| struct BaseParams { |
| BaseParams(BlockDimension dims, NTaps ntaps_x, NTaps ntaps_y, bool avg) |
| : dims(dims), ntaps_x(ntaps_x), ntaps_y(ntaps_y), avg(avg) {} |
| |
| BlockDimension dims; |
| NTaps ntaps_x, ntaps_y; |
| bool avg; |
| }; |
| |
| template <typename SrcPixel> |
| class ConvolveScaleTestBase : public ::testing::Test { |
| public: |
| ConvolveScaleTestBase() : image_(NULL) {} |
| virtual ~ConvolveScaleTestBase() { delete image_; } |
| virtual void TearDown() { libaom_test::ClearSystemState(); } |
| |
| // Implemented by subclasses (SetUp depends on the parameters passed |
| // in and RunOne depends on the function to be tested. These can't |
| // be templated for low/high bit depths because they have different |
| // numbers of parameters) |
| virtual void SetUp() = 0; |
| virtual void RunOne(bool ref) = 0; |
| |
| protected: |
| void SetParams(const BaseParams ¶ms, int bd) { |
| width_ = std::get<0>(params.dims); |
| height_ = std::get<1>(params.dims); |
| ntaps_x_ = params.ntaps_x; |
| ntaps_y_ = params.ntaps_y; |
| bd_ = bd; |
| avg_ = params.avg; |
| |
| filter_x_.set(ntaps_x_, false); |
| filter_y_.set(ntaps_y_, true); |
| convolve_params_ = |
| get_conv_params_no_round(avg_ != false, 0, NULL, 0, 1, bd); |
| |
| delete image_; |
| image_ = new TestImage<SrcPixel>(width_, height_, bd_); |
| } |
| |
| void SetConvParamOffset(int i, int j, int is_compound, int do_average, |
| int use_dist_wtd_comp_avg) { |
| if (i == -1 && j == -1) { |
| convolve_params_.use_dist_wtd_comp_avg = use_dist_wtd_comp_avg; |
| convolve_params_.is_compound = is_compound; |
| convolve_params_.do_average = do_average; |
| } else { |
| convolve_params_.use_dist_wtd_comp_avg = use_dist_wtd_comp_avg; |
| convolve_params_.fwd_offset = quant_dist_lookup_table[i][j][0]; |
| convolve_params_.bck_offset = quant_dist_lookup_table[i][j][1]; |
| convolve_params_.is_compound = is_compound; |
| convolve_params_.do_average = do_average; |
| } |
| } |
| |
| void Run() { |
| ACMRandom rnd(ACMRandom::DeterministicSeed()); |
| for (int i = 0; i < kTestIters; ++i) { |
| int is_compound = 0; |
| SetConvParamOffset(-1, -1, is_compound, 0, 0); |
| Prep(&rnd); |
| RunOne(true); |
| RunOne(false); |
| image_->Check(); |
| |
| is_compound = 1; |
| for (int do_average = 0; do_average < 2; do_average++) { |
| for (int use_dist_wtd_comp_avg = 0; use_dist_wtd_comp_avg < 2; |
| use_dist_wtd_comp_avg++) { |
| for (int j = 0; j < 2; ++j) { |
| for (int k = 0; k < 4; ++k) { |
| SetConvParamOffset(j, k, is_compound, do_average, |
| use_dist_wtd_comp_avg); |
| Prep(&rnd); |
| RunOne(true); |
| RunOne(false); |
| image_->Check(); |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| void SpeedTest() { |
| ACMRandom rnd(ACMRandom::DeterministicSeed()); |
| Prep(&rnd); |
| |
| aom_usec_timer ref_timer; |
| aom_usec_timer_start(&ref_timer); |
| for (int i = 0; i < kPerfIters; ++i) RunOne(true); |
| aom_usec_timer_mark(&ref_timer); |
| const int64_t ref_time = aom_usec_timer_elapsed(&ref_timer); |
| |
| aom_usec_timer tst_timer; |
| aom_usec_timer_start(&tst_timer); |
| for (int i = 0; i < kPerfIters; ++i) RunOne(false); |
| aom_usec_timer_mark(&tst_timer); |
| const int64_t tst_time = aom_usec_timer_elapsed(&tst_timer); |
| |
| std::cout << "[ ] C time = " << ref_time / 1000 |
| << " ms, SIMD time = " << tst_time / 1000 << " ms\n"; |
| |
| EXPECT_GT(ref_time, tst_time) |
| << "Error: CDEFSpeedTest, SIMD slower than C.\n" |
| << "C time: " << ref_time << " us\n" |
| << "SIMD time: " << tst_time << " us\n"; |
| } |
| |
| static int RandomSubpel(ACMRandom *rnd) { |
| const uint8_t subpel_mode = rnd->Rand8(); |
| if ((subpel_mode & 7) == 0) { |
| return 0; |
| } else if ((subpel_mode & 7) == 1) { |
| return SCALE_SUBPEL_SHIFTS - 1; |
| } else { |
| return 1 + rnd->PseudoUniform(SCALE_SUBPEL_SHIFTS - 2); |
| } |
| } |
| |
| void Prep(ACMRandom *rnd) { |
| assert(rnd); |
| |
| // Choose subpel_x_ and subpel_y_. They should be less than |
| // SCALE_SUBPEL_SHIFTS; we also want to add extra weight to "interesting" |
| // values: 0 and SCALE_SUBPEL_SHIFTS - 1 |
| subpel_x_ = RandomSubpel(rnd); |
| subpel_y_ = RandomSubpel(rnd); |
| |
| image_->Initialize(rnd); |
| } |
| |
| int width_, height_, bd_; |
| NTaps ntaps_x_, ntaps_y_; |
| bool avg_; |
| int subpel_x_, subpel_y_; |
| TestFilter filter_x_, filter_y_; |
| TestImage<SrcPixel> *image_; |
| ConvolveParams convolve_params_; |
| }; |
| |
| typedef tuple<int, int> BlockDimension; |
| |
| typedef void (*LowbdConvolveFunc)(const uint8_t *src, int src_stride, |
| uint8_t *dst, int dst_stride, int w, int h, |
| const InterpFilterParams *filter_params_x, |
| const InterpFilterParams *filter_params_y, |
| const int subpel_x_qn, const int x_step_qn, |
| const int subpel_y_qn, const int y_step_qn, |
| ConvolveParams *conv_params); |
| |
| // Test parameter list: |
| // <tst_fun, dims, ntaps_x, ntaps_y, avg> |
| typedef tuple<LowbdConvolveFunc, BlockDimension, NTaps, NTaps, bool> |
| LowBDParams; |
| |
| class LowBDConvolveScaleTest |
| : public ConvolveScaleTestBase<uint8_t>, |
| public ::testing::WithParamInterface<LowBDParams> { |
| public: |
| virtual ~LowBDConvolveScaleTest() {} |
| |
| void SetUp() { |
| tst_fun_ = GET_PARAM(0); |
| |
| const BlockDimension &block = GET_PARAM(1); |
| const NTaps ntaps_x = GET_PARAM(2); |
| const NTaps ntaps_y = GET_PARAM(3); |
| const int bd = 8; |
| const bool avg = GET_PARAM(4); |
| |
| SetParams(BaseParams(block, ntaps_x, ntaps_y, avg), bd); |
| } |
| |
| void RunOne(bool ref) { |
| const uint8_t *src = image_->GetSrcData(ref, false); |
| uint8_t *dst = image_->GetDstData(ref, false); |
| convolve_params_.dst = image_->GetDst16Data(ref, false); |
| const int src_stride = image_->src_stride(); |
| const int dst_stride = image_->dst_stride(); |
| if (ref) { |
| av1_convolve_2d_scale_c(src, src_stride, dst, dst_stride, width_, height_, |
| &filter_x_.params_, &filter_y_.params_, subpel_x_, |
| kXStepQn, subpel_y_, kYStepQn, &convolve_params_); |
| } else { |
| tst_fun_(src, src_stride, dst, dst_stride, width_, height_, |
| &filter_x_.params_, &filter_y_.params_, subpel_x_, kXStepQn, |
| subpel_y_, kYStepQn, &convolve_params_); |
| } |
| } |
| |
| private: |
| LowbdConvolveFunc tst_fun_; |
| }; |
| |
| const BlockDimension kBlockDim[] = { |
| make_tuple(2, 2), make_tuple(2, 4), make_tuple(4, 4), |
| make_tuple(4, 8), make_tuple(8, 4), make_tuple(8, 8), |
| make_tuple(8, 16), make_tuple(16, 8), make_tuple(16, 16), |
| make_tuple(16, 32), make_tuple(32, 16), make_tuple(32, 32), |
| make_tuple(32, 64), make_tuple(64, 32), make_tuple(64, 64), |
| make_tuple(64, 128), make_tuple(128, 64), make_tuple(128, 128), |
| }; |
| |
| const NTaps kNTaps[] = { EIGHT_TAP }; |
| |
| TEST_P(LowBDConvolveScaleTest, Check) { Run(); } |
| TEST_P(LowBDConvolveScaleTest, DISABLED_Speed) { SpeedTest(); } |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SSE4_1, LowBDConvolveScaleTest, |
| ::testing::Combine(::testing::Values(av1_convolve_2d_scale_sse4_1), |
| ::testing::ValuesIn(kBlockDim), |
| ::testing::ValuesIn(kNTaps), ::testing::ValuesIn(kNTaps), |
| ::testing::Bool())); |
| |
| #if CONFIG_AV1_HIGHBITDEPTH |
| typedef void (*HighbdConvolveFunc)(const uint16_t *src, int src_stride, |
| uint16_t *dst, int dst_stride, int w, int h, |
| const InterpFilterParams *filter_params_x, |
| const InterpFilterParams *filter_params_y, |
| const int subpel_x_qn, const int x_step_qn, |
| const int subpel_y_qn, const int y_step_qn, |
| ConvolveParams *conv_params, int bd); |
| |
| // Test parameter list: |
| // <tst_fun, dims, ntaps_x, ntaps_y, avg, bd> |
| typedef tuple<HighbdConvolveFunc, BlockDimension, NTaps, NTaps, bool, int> |
| HighBDParams; |
| |
| class HighBDConvolveScaleTest |
| : public ConvolveScaleTestBase<uint16_t>, |
| public ::testing::WithParamInterface<HighBDParams> { |
| public: |
| virtual ~HighBDConvolveScaleTest() {} |
| |
| void SetUp() { |
| tst_fun_ = GET_PARAM(0); |
| |
| const BlockDimension &block = GET_PARAM(1); |
| const NTaps ntaps_x = GET_PARAM(2); |
| const NTaps ntaps_y = GET_PARAM(3); |
| const bool avg = GET_PARAM(4); |
| const int bd = GET_PARAM(5); |
| |
| SetParams(BaseParams(block, ntaps_x, ntaps_y, avg), bd); |
| } |
| |
| void RunOne(bool ref) { |
| const uint16_t *src = image_->GetSrcData(ref, false); |
| uint16_t *dst = image_->GetDstData(ref, false); |
| convolve_params_.dst = image_->GetDst16Data(ref, false); |
| const int src_stride = image_->src_stride(); |
| const int dst_stride = image_->dst_stride(); |
| |
| if (ref) { |
| av1_highbd_convolve_2d_scale_c( |
| src, src_stride, dst, dst_stride, width_, height_, &filter_x_.params_, |
| &filter_y_.params_, subpel_x_, kXStepQn, subpel_y_, kYStepQn, |
| &convolve_params_, bd_); |
| } else { |
| tst_fun_(src, src_stride, dst, dst_stride, width_, height_, |
| &filter_x_.params_, &filter_y_.params_, subpel_x_, kXStepQn, |
| subpel_y_, kYStepQn, &convolve_params_, bd_); |
| } |
| } |
| |
| private: |
| HighbdConvolveFunc tst_fun_; |
| }; |
| |
| const int kBDs[] = { 8, 10, 12 }; |
| |
| TEST_P(HighBDConvolveScaleTest, Check) { Run(); } |
| TEST_P(HighBDConvolveScaleTest, DISABLED_Speed) { SpeedTest(); } |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SSE4_1, HighBDConvolveScaleTest, |
| ::testing::Combine(::testing::Values(av1_highbd_convolve_2d_scale_sse4_1), |
| ::testing::ValuesIn(kBlockDim), |
| ::testing::ValuesIn(kNTaps), ::testing::ValuesIn(kNTaps), |
| ::testing::Bool(), ::testing::ValuesIn(kBDs))); |
| #endif // CONFIG_AV1_HIGHBITDEPTH |
| } // namespace |