test/aomenc.sh - aom - Git at Google

 #!/bin/sh
 ## Copyright (c) 2016, Alliance for Open Media. All rights reserved
 ##
 ## This source code is subject to the terms of the BSD 2 Clause License and
 ## the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License
 ## was not distributed with this source code in the LICENSE file, you can
 ## obtain it at www.aomedia.org/license/software. If the Alliance for Open
 ## Media Patent License 1.0 was not distributed with this source code in the
 ## PATENTS file, you can obtain it at www.aomedia.org/license/patent.
 ##
 ## This file tests aomenc using hantro_collage_w352h288.yuv as input. To add
 ## new tests to this file, do the following:
 ##   1. Write a shell function (this is your test).
 ##   2. Add the function to aomenc_tests (on a new line).
 ##
 . $(dirname $0)/tools_common.sh

 # Environment check: Make sure input is available.
 aomenc_verify_environment() {
   if [ ! -e "${YUV_RAW_INPUT}" ]; then
     elog "The file ${YUV_RAW_INPUT##*/} must exist in LIBAOM_TEST_DATA_PATH."
     return 1
   fi
   if [ "$(aomenc_can_encode_av1)" = "yes" ]; then
     if [ ! -e "${Y4M_NOSQ_PAR_INPUT}" ]; then
       elog "The file ${Y4M_NOSQ_PAR_INPUT##*/} must exist in"
       elog "LIBAOM_TEST_DATA_PATH."
       return 1
     fi
   fi
   if [ -z "$(aom_tool_path aomenc)" ]; then
     elog "aomenc not found. It must exist in LIBAOM_BIN_PATH or its parent."
     return 1
   fi
 }

 aomenc_can_encode_av1() {
   if [ "$(av1_encode_available)" = "yes" ]; then
     echo yes
   fi
 }

 aomenc_can_encode_av1() {
   if [ "$(av1_encode_available)" = "yes" ]; then
     echo yes
   fi
 }

 # Utilities that echo aomenc input file parameters.
 y4m_input_non_square_par() {
   echo ""${Y4M_NOSQ_PAR_INPUT}""
 }

 y4m_input_720p() {
   echo ""${Y4M_720P_INPUT}""
 }

 # Wrapper function for running aomenc with pipe input. Requires that
 # LIBAOM_BIN_PATH points to the directory containing aomenc. $1 is used as the
 # input file path and shifted away. All remaining parameters are passed through
 # to aomenc.
 aomenc_pipe() {
   local encoder="$(aom_tool_path aomenc)"
   local input="$1"
   shift
   cat "${input}" | eval "${AOM_TEST_PREFIX}" "${encoder}" - \
     --test-decode=fatal \
     "$@" ${devnull}
 }

 # Wrapper function for running aomenc. Requires that LIBAOM_BIN_PATH points to
 # the directory containing aomenc. $1 one is used as the input file path and
 # shifted away. All remaining parameters are passed through to aomenc.
 aomenc() {
   local encoder="$(aom_tool_path aomenc)"
   local input="$1"
   shift
   eval "${AOM_TEST_PREFIX}" "${encoder}" "${input}" \
     --test-decode=fatal \
     "$@" ${devnull}
 }

 aomenc_av1_ivf() {
   if [ "$(aomenc_can_encode_av1)" = "yes" ]; then
     local output="${AV1_IVF_FILE}"
     if [ -e "${AV1_IVF_FILE}" ]; then
       output="${AOM_TEST_OUTPUT_DIR}/av1_test.ivf"
     fi
     aomenc $(yuv_raw_input) \
       $(aomenc_encode_test_fast_params) \
       --ivf \
       --output="${output}" || return 1

     if [ ! -e "${output}" ]; then
       elog "Output file does not exist."
       return 1
     fi
   fi
 }

 aomenc_av1_ivf_rt() {
   if [ "$(aomenc_can_encode_av1)" = "yes" ]; then
     local output="${AV1_IVF_FILE}"
     if [ -e "${AV1_IVF_FILE}" ]; then
       output="${AOM_TEST_OUTPUT_DIR}/av1_test.ivf"
     fi
     aomenc $(yuv_raw_input) \
       $(aomenc_encode_test_rt_params) \
       --ivf \
       --output="${output}" || return 1

     if [ ! -e "${output}" ]; then
       elog "Output file does not exist."
       return 1
     fi
   fi
 }

 aomenc_av1_ivf_use_16bit_internal() {
   if [ "$(aomenc_can_encode_av1)" = "yes" ]; then
     local output="${AV1_IVF_FILE}"
     if [ -e "${AV1_IVF_FILE}" ]; then
       output="${AOM_TEST_OUTPUT_DIR}/av1_test_16bit.ivf"
     fi
     aomenc $(yuv_raw_input) \
       $(aomenc_encode_test_fast_params) \
       --ivf \
       --use-16bit-internal \
       --output="${output}" || return 1

     if [ ! -e "${output}" ]; then
       elog "Output file does not exist."
       return 1
     fi
   fi
 }

 aomenc_av1_obu_annexb() {
    if [ "$(aomenc_can_encode_av1)" = "yes" ]; then
     local output="${AV1_OBU_ANNEXB_FILE}"
     if [ -e "${AV1_OBU_ANNEXB_FILE}" ]; then
       output="${AOM_TEST_OUTPUT_DIR}/av1_test.annexb.obu"
     fi
     aomenc $(yuv_raw_input) \
       $(aomenc_encode_test_fast_params) \
       --obu \
       --annexb=1 \
       --output="${output}" || return 1

     if [ ! -e "${output}" ]; then
       elog "Output file does not exist."
       return 1
     fi
   fi
 }

 aomenc_av1_obu_section5() {
    if [ "$(aomenc_can_encode_av1)" = "yes" ]; then
     local output="${AV1_OBU_SEC5_FILE}"
     if [ -e "${AV1_OBU_SEC5_FILE}" ]; then
       output="${AOM_TEST_OUTPUT_DIR}/av1_test.section5.obu"
     fi
     aomenc $(yuv_raw_input) \
       $(aomenc_encode_test_fast_params) \
       --obu \
       --output="${output}" || return 1

     if [ ! -e "${output}" ]; then
       elog "Output file does not exist."
       return 1
     fi
   fi
 }

 aomenc_av1_webm() {
   if [ "$(aomenc_can_encode_av1)" = "yes" ] && \
      [ "$(webm_io_available)" = "yes" ]; then
     local output="${AV1_WEBM_FILE}"
     if [ -e "${AV1_WEBM_FILE}" ]; then
       output="${AOM_TEST_OUTPUT_DIR}/av1_test.webm"
     fi
     aomenc $(yuv_raw_input) \
       $(aomenc_encode_test_fast_params) \
       --output="${output}" || return 1

     if [ ! -e "${output}" ]; then
       elog "Output file does not exist."
       return 1
     fi
   fi
 }

 aomenc_av1_webm_1pass() {
   if [ "$(aomenc_can_encode_av1)" = "yes" ] && \
      [ "$(webm_io_available)" = "yes" ]; then
     local output="${AOM_TEST_OUTPUT_DIR}/av1_test.webm"
     aomenc $(yuv_raw_input) \
       $(aomenc_encode_test_fast_params) \
       --passes=1 \
       --output="${output}" || return 1

     if [ ! -e "${output}" ]; then
       elog "Output file does not exist."
       return 1
     fi
   fi
 }

 aomenc_av1_ivf_lossless() {
   if [ "$(aomenc_can_encode_av1)" = "yes" ]; then
     local output="${AOM_TEST_OUTPUT_DIR}/av1_lossless.ivf"
     aomenc $(yuv_raw_input) \
       $(aomenc_encode_test_fast_params) \
       --ivf \
       --output="${output}" \
       --lossless=1 || return 1

     if [ ! -e "${output}" ]; then
       elog "Output file does not exist."
       return 1
     fi
   fi
 }

 aomenc_av1_ivf_minq0_maxq0() {
   if [ "$(aomenc_can_encode_av1)" = "yes" ]; then
     local output="${AOM_TEST_OUTPUT_DIR}/av1_lossless_minq0_maxq0.ivf"
     aomenc $(yuv_raw_input) \
       $(aomenc_encode_test_fast_params) \
       --ivf \
       --output="${output}" \
       --min-q=0 \
       --max-q=0 || return 1

     if [ ! -e "${output}" ]; then
       elog "Output file does not exist."
       return 1
     fi
   fi
 }

 aomenc_av1_webm_lag5_frames10() {
   if [ "$(aomenc_can_encode_av1)" = "yes" ] && \
      [ "$(webm_io_available)" = "yes" ]; then
     local lag_total_frames=10
     local lag_frames=5
     local output="${AOM_TEST_OUTPUT_DIR}/av1_lag5_frames10.webm"
     aomenc $(yuv_raw_input) \
       $(aomenc_encode_test_fast_params) \
       --limit=${lag_total_frames} \
       --lag-in-frames=${lag_frames} \
       --output="${output}" || return 1

     if [ ! -e "${output}" ]; then
       elog "Output file does not exist."
       return 1
     fi
   fi
 }

 # TODO(fgalligan): Test that DisplayWidth is different than video width.
 aomenc_av1_webm_non_square_par() {
   if [ "$(aomenc_can_encode_av1)" = "yes" ] && \
      [ "$(webm_io_available)" = "yes" ]; then
     local output="${AOM_TEST_OUTPUT_DIR}/av1_non_square_par.webm"
     aomenc $(y4m_input_non_square_par) \
       $(aomenc_encode_test_fast_params) \
       --output="${output}" || return 1

     if [ ! -e "${output}" ]; then
       elog "Output file does not exist."
       return 1
     fi
   fi
 }

 aomenc_av1_webm_cdf_update_mode() {
   if [ "$(aomenc_can_encode_av1)" = "yes" ] && \
      [ "$(webm_io_available)" = "yes" ]; then
     for mode in 0 1 2; do
       local output="${AOM_TEST_OUTPUT_DIR}/cdf_mode_${mode}.webm"
       aomenc $(yuv_raw_input) \
         $(aomenc_encode_test_fast_params) \
         --cdf-update-mode=${mode} \
         --output="${output}" || return 1

       if [ ! -e "${output}" ]; then
         elog "Output file does not exist."
         return 1
       fi
     done
   fi
 }

 if [ "$(realtime_only_build)" = "yes" ]; then
   aomenc_tests="aomenc_av1_ivf_rt"
 else
   aomenc_tests="aomenc_av1_ivf
                 aomenc_av1_ivf_rt
                 aomenc_av1_obu_annexb
                 aomenc_av1_obu_section5
                 aomenc_av1_webm
                 aomenc_av1_webm_1pass
                 aomenc_av1_ivf_lossless
                 aomenc_av1_ivf_minq0_maxq0
                 aomenc_av1_ivf_use_16bit_internal
                 aomenc_av1_webm_lag5_frames10
                 aomenc_av1_webm_non_square_par
                 aomenc_av1_webm_cdf_update_mode"
 fi

 run_tests aomenc_verify_environment "${aomenc_tests}"
	#!/bin/sh
	## Copyright (c) 2016, Alliance for Open Media. All rights reserved
	##
	## This source code is subject to the terms of the BSD 2 Clause License and
	## the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License
	## was not distributed with this source code in the LICENSE file, you can
	## obtain it at www.aomedia.org/license/software. If the Alliance for Open
	## Media Patent License 1.0 was not distributed with this source code in the
	## PATENTS file, you can obtain it at www.aomedia.org/license/patent.
	##
	## This file tests aomenc using hantro_collage_w352h288.yuv as input. To add
	## new tests to this file, do the following:
	## 1. Write a shell function (this is your test).
	## 2. Add the function to aomenc_tests (on a new line).
	##
	. $(dirname $0)/tools_common.sh

	# Environment check: Make sure input is available.
	aomenc_verify_environment() {
	if [ ! -e "${YUV_RAW_INPUT}" ]; then
	elog "The file ${YUV_RAW_INPUT##*/} must exist in LIBAOM_TEST_DATA_PATH."
	return 1
	fi
	if [ "$(aomenc_can_encode_av1)" = "yes" ]; then
	if [ ! -e "${Y4M_NOSQ_PAR_INPUT}" ]; then
	elog "The file ${Y4M_NOSQ_PAR_INPUT##*/} must exist in"
	elog "LIBAOM_TEST_DATA_PATH."
	return 1
	fi
	fi
	if [ -z "$(aom_tool_path aomenc)" ]; then
	elog "aomenc not found. It must exist in LIBAOM_BIN_PATH or its parent."
	return 1
	fi
	}

	aomenc_can_encode_av1() {
	if [ "$(av1_encode_available)" = "yes" ]; then
	echo yes
	fi
	}

	aomenc_can_encode_av1() {
	if [ "$(av1_encode_available)" = "yes" ]; then
	echo yes
	fi
	}

	# Utilities that echo aomenc input file parameters.
	y4m_input_non_square_par() {
	echo ""${Y4M_NOSQ_PAR_INPUT}""
	}

	y4m_input_720p() {
	echo ""${Y4M_720P_INPUT}""
	}

	# Wrapper function for running aomenc with pipe input. Requires that
	# LIBAOM_BIN_PATH points to the directory containing aomenc. $1 is used as the
	# input file path and shifted away. All remaining parameters are passed through
	# to aomenc.
	aomenc_pipe() {
	local encoder="$(aom_tool_path aomenc)"
	local input="$1"
	shift
	cat "${input}" \| eval "${AOM_TEST_PREFIX}" "${encoder}" - \
	--test-decode=fatal \
	"$@" ${devnull}
	}

	# Wrapper function for running aomenc. Requires that LIBAOM_BIN_PATH points to
	# the directory containing aomenc. $1 one is used as the input file path and
	# shifted away. All remaining parameters are passed through to aomenc.
	aomenc() {
	local encoder="$(aom_tool_path aomenc)"
	local input="$1"
	shift
	eval "${AOM_TEST_PREFIX}" "${encoder}" "${input}" \
	--test-decode=fatal \
	"$@" ${devnull}
	}

	aomenc_av1_ivf() {
	if [ "$(aomenc_can_encode_av1)" = "yes" ]; then
	local output="${AV1_IVF_FILE}"
	if [ -e "${AV1_IVF_FILE}" ]; then
	output="${AOM_TEST_OUTPUT_DIR}/av1_test.ivf"
	fi
	aomenc $(yuv_raw_input) \
	$(aomenc_encode_test_fast_params) \
	--ivf \
	--output="${output}" \|\| return 1

	if [ ! -e "${output}" ]; then
	elog "Output file does not exist."
	return 1
	fi
	fi
	}

	aomenc_av1_ivf_rt() {
	if [ "$(aomenc_can_encode_av1)" = "yes" ]; then
	local output="${AV1_IVF_FILE}"
	if [ -e "${AV1_IVF_FILE}" ]; then
	output="${AOM_TEST_OUTPUT_DIR}/av1_test.ivf"
	fi
	aomenc $(yuv_raw_input) \
	$(aomenc_encode_test_rt_params) \
	--ivf \
	--output="${output}" \|\| return 1

	if [ ! -e "${output}" ]; then
	elog "Output file does not exist."
	return 1
	fi
	fi
	}

	aomenc_av1_ivf_use_16bit_internal() {
	if [ "$(aomenc_can_encode_av1)" = "yes" ]; then
	local output="${AV1_IVF_FILE}"
	if [ -e "${AV1_IVF_FILE}" ]; then
	output="${AOM_TEST_OUTPUT_DIR}/av1_test_16bit.ivf"
	fi
	aomenc $(yuv_raw_input) \
	$(aomenc_encode_test_fast_params) \
	--ivf \
	--use-16bit-internal \
	--output="${output}" \|\| return 1

	if [ ! -e "${output}" ]; then
	elog "Output file does not exist."
	return 1
	fi
	fi
	}

	aomenc_av1_obu_annexb() {
	if [ "$(aomenc_can_encode_av1)" = "yes" ]; then
	local output="${AV1_OBU_ANNEXB_FILE}"
	if [ -e "${AV1_OBU_ANNEXB_FILE}" ]; then
	output="${AOM_TEST_OUTPUT_DIR}/av1_test.annexb.obu"
	fi
	aomenc $(yuv_raw_input) \
	$(aomenc_encode_test_fast_params) \
	--obu \
	--annexb=1 \
	--output="${output}" \|\| return 1

	if [ ! -e "${output}" ]; then
	elog "Output file does not exist."
	return 1
	fi
	fi
	}

	aomenc_av1_obu_section5() {
	if [ "$(aomenc_can_encode_av1)" = "yes" ]; then
	local output="${AV1_OBU_SEC5_FILE}"
	if [ -e "${AV1_OBU_SEC5_FILE}" ]; then
	output="${AOM_TEST_OUTPUT_DIR}/av1_test.section5.obu"
	fi
	aomenc $(yuv_raw_input) \
	$(aomenc_encode_test_fast_params) \
	--obu \
	--output="${output}" \|\| return 1

	if [ ! -e "${output}" ]; then
	elog "Output file does not exist."
	return 1
	fi
	fi
	}

	aomenc_av1_webm() {
	if [ "$(aomenc_can_encode_av1)" = "yes" ] && \
	[ "$(webm_io_available)" = "yes" ]; then
	local output="${AV1_WEBM_FILE}"
	if [ -e "${AV1_WEBM_FILE}" ]; then
	output="${AOM_TEST_OUTPUT_DIR}/av1_test.webm"
	fi
	aomenc $(yuv_raw_input) \
	$(aomenc_encode_test_fast_params) \
	--output="${output}" \|\| return 1

	if [ ! -e "${output}" ]; then
	elog "Output file does not exist."
	return 1
	fi
	fi
	}

	aomenc_av1_webm_1pass() {
	if [ "$(aomenc_can_encode_av1)" = "yes" ] && \
	[ "$(webm_io_available)" = "yes" ]; then
	local output="${AOM_TEST_OUTPUT_DIR}/av1_test.webm"
	aomenc $(yuv_raw_input) \
	$(aomenc_encode_test_fast_params) \
	--passes=1 \
	--output="${output}" \|\| return 1

	if [ ! -e "${output}" ]; then
	elog "Output file does not exist."
	return 1
	fi
	fi
	}

	aomenc_av1_ivf_lossless() {
	if [ "$(aomenc_can_encode_av1)" = "yes" ]; then
	local output="${AOM_TEST_OUTPUT_DIR}/av1_lossless.ivf"
	aomenc $(yuv_raw_input) \
	$(aomenc_encode_test_fast_params) \
	--ivf \
	--output="${output}" \
	--lossless=1 \|\| return 1

	if [ ! -e "${output}" ]; then
	elog "Output file does not exist."
	return 1
	fi
	fi
	}

	aomenc_av1_ivf_minq0_maxq0() {
	if [ "$(aomenc_can_encode_av1)" = "yes" ]; then
	local output="${AOM_TEST_OUTPUT_DIR}/av1_lossless_minq0_maxq0.ivf"
	aomenc $(yuv_raw_input) \
	$(aomenc_encode_test_fast_params) \
	--ivf \
	--output="${output}" \
	--min-q=0 \
	--max-q=0 \|\| return 1

	if [ ! -e "${output}" ]; then
	elog "Output file does not exist."
	return 1
	fi
	fi
	}

	aomenc_av1_webm_lag5_frames10() {
	if [ "$(aomenc_can_encode_av1)" = "yes" ] && \
	[ "$(webm_io_available)" = "yes" ]; then
	local lag_total_frames=10
	local lag_frames=5
	local output="${AOM_TEST_OUTPUT_DIR}/av1_lag5_frames10.webm"
	aomenc $(yuv_raw_input) \
	$(aomenc_encode_test_fast_params) \
	--limit=${lag_total_frames} \
	--lag-in-frames=${lag_frames} \
	--output="${output}" \|\| return 1

	if [ ! -e "${output}" ]; then
	elog "Output file does not exist."
	return 1
	fi
	fi
	}

	# TODO(fgalligan): Test that DisplayWidth is different than video width.
	aomenc_av1_webm_non_square_par() {
	if [ "$(aomenc_can_encode_av1)" = "yes" ] && \
	[ "$(webm_io_available)" = "yes" ]; then
	local output="${AOM_TEST_OUTPUT_DIR}/av1_non_square_par.webm"
	aomenc $(y4m_input_non_square_par) \
	$(aomenc_encode_test_fast_params) \
	--output="${output}" \|\| return 1

	if [ ! -e "${output}" ]; then
	elog "Output file does not exist."
	return 1
	fi
	fi
	}

	aomenc_av1_webm_cdf_update_mode() {
	if [ "$(aomenc_can_encode_av1)" = "yes" ] && \
	[ "$(webm_io_available)" = "yes" ]; then
	for mode in 0 1 2; do
	local output="${AOM_TEST_OUTPUT_DIR}/cdf_mode_${mode}.webm"
	aomenc $(yuv_raw_input) \
	$(aomenc_encode_test_fast_params) \
	--cdf-update-mode=${mode} \
	--output="${output}" \|\| return 1

	if [ ! -e "${output}" ]; then
	elog "Output file does not exist."
	return 1
	fi
	done
	fi
	}

	if [ "$(realtime_only_build)" = "yes" ]; then
	aomenc_tests="aomenc_av1_ivf_rt"
	else
	aomenc_tests="aomenc_av1_ivf
	aomenc_av1_ivf_rt
	aomenc_av1_obu_annexb
	aomenc_av1_obu_section5
	aomenc_av1_webm
	aomenc_av1_webm_1pass
	aomenc_av1_ivf_lossless
	aomenc_av1_ivf_minq0_maxq0
	aomenc_av1_ivf_use_16bit_internal
	aomenc_av1_webm_lag5_frames10
	aomenc_av1_webm_non_square_par
	aomenc_av1_webm_cdf_update_mode"
	fi

	run_tests aomenc_verify_environment "${aomenc_tests}"