blob: 3f1756f5ca20dbb2866ce4a545e28dea150c8c4b [file] [log] [blame]
/*
* Copyright (c) 2016, Alliance for Open Media. All rights reserved
*
* This source code is subject to the terms of the BSD 2 Clause License and
* the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License
* was not distributed with this source code in the LICENSE file, you can
* obtain it at www.aomedia.org/license/software. If the Alliance for Open
* Media Patent License 1.0 was not distributed with this source code in the
* PATENTS file, you can obtain it at www.aomedia.org/license/patent.
*/
#ifndef AOM_AV1_ENCODER_RATECTRL_H_
#define AOM_AV1_ENCODER_RATECTRL_H_
#include "aom/aom_codec.h"
#include "aom/aom_integer.h"
#include "aom_ports/mem.h"
#include "av1/common/av1_common_int.h"
#include "av1/common/blockd.h"
#ifdef __cplusplus
extern "C" {
#endif
/*!\cond */
// Bits Per MB at different Q (Multiplied by 512)
#define BPER_MB_NORMBITS 9
// Use this macro to turn on/off use of alt-refs in one-pass mode.
#define USE_ALTREF_FOR_ONE_PASS 1
// Threshold used to define if a KF group is static (e.g. a slide show).
// Essentially, this means that no frame in the group has more than 1% of MBs
// that are not marked as coded with 0,0 motion in the first pass.
#define STATIC_KF_GROUP_THRESH 99
#define STATIC_KF_GROUP_FLOAT_THRESH 0.99
// The maximum duration of a GF group that is static (e.g. a slide show).
#define MAX_STATIC_GF_GROUP_LENGTH 250
#define MIN_GF_INTERVAL 4
#define MAX_GF_INTERVAL 32
#define FIXED_GF_INTERVAL 16
#define MAX_GF_LENGTH_LAP 16
#define MAX_NUM_GF_INTERVALS 15
#define MAX_ARF_LAYERS 6
// #define STRICT_RC
typedef struct {
int resize_width;
int resize_height;
uint8_t superres_denom;
} size_params_type;
enum {
INTER_NORMAL,
GF_ARF_LOW,
GF_ARF_STD,
KF_STD,
RATE_FACTOR_LEVELS
} UENUM1BYTE(RATE_FACTOR_LEVEL);
enum {
KF_UPDATE,
LF_UPDATE,
GF_UPDATE,
ARF_UPDATE,
OVERLAY_UPDATE,
INTNL_OVERLAY_UPDATE, // Internal Overlay Frame
INTNL_ARF_UPDATE, // Internal Altref Frame
FRAME_UPDATE_TYPES
} UENUM1BYTE(FRAME_UPDATE_TYPE);
enum {
REFBUF_RESET, // Clear reference frame buffer
REFBUF_UPDATE, // Refresh reference frame buffer
REFBUF_STATES
} UENUM1BYTE(REFBUF_STATE);
typedef enum {
NO_RESIZE = 0,
DOWN_THREEFOUR = 1, // From orig to 3/4.
DOWN_ONEHALF = 2, // From orig or 3/4 to 1/2.
UP_THREEFOUR = -1, // From 1/2 to 3/4.
UP_ORIG = -2, // From 1/2 or 3/4 to orig.
} RESIZE_ACTION;
typedef enum { ORIG = 0, THREE_QUARTER = 1, ONE_HALF = 2 } RESIZE_STATE;
#define MAX_FIRSTPASS_ANALYSIS_FRAMES 150
typedef enum region_types {
STABLE_REGION = 0,
HIGH_VAR_REGION = 1,
SCENECUT_REGION = 2,
BLENDING_REGION = 3,
} REGION_TYPES;
typedef struct regions {
int start;
int last;
double avg_noise_var;
double avg_cor_coeff;
double avg_sr_fr_ratio;
double avg_intra_err;
double avg_coded_err;
REGION_TYPES type;
} REGIONS;
/*!\endcond */
/*!
* \brief Rate Control parameters and status
*/
typedef struct {
// Rate targetting variables
/*!
* Baseline target rate for frame before adjustment for previous under or
* over shoot.
*/
int base_frame_target;
/*!
* Target rate for frame after adjustment for previous under or over shoot.
*/
int this_frame_target; // Actual frame target after rc adjustment.
/*!
* Target bit budget for the current GF / ARF group of frame.
*/
int64_t gf_group_bits;
/*!
* Projected size for current frame
*/
int projected_frame_size;
/*!
* Bit size of transform coefficient for current frame.
*/
int coefficient_size;
/*!
* Super block rate target used with some adaptive quantization strategies.
*/
int sb64_target_rate;
/*!
* Q used on last encoded frame of the given type.
*/
int last_q[FRAME_TYPES];
/*!
* Q used for last boosted (non leaf) frame (GF/KF/ARF)
*/
int last_boosted_qindex;
/*!
* Q used for last boosted (non leaf) frame
*/
int last_kf_qindex;
/*!
* Boost factor used to calculate the extra bits allocated to ARFs and GFs
*/
int gfu_boost;
/*!
* Boost factor used to calculate the extra bits allocated to the key frame
*/
int kf_boost;
/*!
* Correction factors used to adjust the q estimate for a given target rate
* in the encode loop.
*/
double rate_correction_factors[RATE_FACTOR_LEVELS];
/*!
* Number of frames since the last ARF / GF.
*/
int frames_since_golden;
/*!
* Number of frames till the next ARF / GF is due.
*/
int frames_till_gf_update_due;
/*!
* Number of determined gf groups left
*/
int intervals_till_gf_calculate_due;
/*!
* Stores the determined gf group lengths for a set of gf groups
*/
int gf_intervals[MAX_NUM_GF_INTERVALS];
/*!
* The current group's index into gf_intervals[]
*/
int cur_gf_index;
/*!\cond */
int num_regions;
REGIONS regions[MAX_FIRSTPASS_ANALYSIS_FRAMES];
double cor_coeff[MAX_FIRSTPASS_ANALYSIS_FRAMES];
int regions_offset; // offset of regions from the last keyframe
int frames_till_regions_update;
int min_gf_interval;
int max_gf_interval;
int static_scene_max_gf_interval;
int baseline_gf_interval;
int constrained_gf_group;
/*!\endcond */
/*!
* Frames before the next key frame
*/
int frames_to_key;
/*!\cond */
int frames_since_key;
int this_key_frame_forced;
int next_key_frame_forced;
int is_src_frame_alt_ref;
int sframe_due;
int high_source_sad;
uint64_t avg_source_sad;
uint64_t prev_avg_source_sad;
int avg_frame_bandwidth; // Average frame size target for clip
int min_frame_bandwidth; // Minimum allocation used for any frame
int max_frame_bandwidth; // Maximum burst rate allowed for a frame.
int prev_avg_frame_bandwidth;
int ni_av_qi;
int ni_tot_qi;
int ni_frames;
int avg_frame_qindex[FRAME_TYPES];
double tot_q;
double avg_q;
int64_t buffer_level;
int64_t bits_off_target;
int64_t vbr_bits_off_target;
int64_t vbr_bits_off_target_fast;
int decimation_factor;
int decimation_count;
int rolling_target_bits;
int rolling_actual_bits;
int rate_error_estimate;
int64_t total_actual_bits;
int64_t total_target_bits;
/*!\endcond */
/*!
* User specified maximum Q allowed for current frame
*/
int worst_quality;
/*!
* User specified minimum Q allowed for current frame
*/
int best_quality;
/*!
* Initial buffuer level in ms for CBR / low delay encoding
*/
int64_t starting_buffer_level;
/*!
* Optimum / target buffuer level in ms for CBR / low delay encoding
*/
int64_t optimal_buffer_level;
/*!
* Maximum target buffuer level in ms for CBR / low delay encoding
*/
int64_t maximum_buffer_size;
/*!\cond */
// rate control history for last frame(1) and the frame before(2).
// -1: undershot
// 1: overshoot
// 0: not initialized.
int rc_1_frame;
int rc_2_frame;
int q_1_frame;
int q_2_frame;
float_t arf_boost_factor;
/*!\endcond */
/*!
* Q index used for ALT frame
*/
int arf_q;
/*!
* Proposed maximum alloed Q for current frame
*/
int active_worst_quality;
/*!
* Proposed minimum allowed Q different layers in a coding pyramid
*/
int active_best_quality[MAX_ARF_LAYERS + 1];
/*!\cond */
int base_layer_qp;
// Total number of stats used only for kf_boost calculation.
int num_stats_used_for_kf_boost;
// Total number of stats used only for gfu_boost calculation.
int num_stats_used_for_gfu_boost;
// Total number of stats required by gfu_boost calculation.
int num_stats_required_for_gfu_boost;
int next_is_fwd_key;
int enable_scenecut_detection;
int use_arf_in_this_kf_group;
// Track amount of low motion in scene
int avg_frame_low_motion;
// For dynamic resize, 1 pass cbr.
RESIZE_STATE resize_state;
int resize_avg_qp;
int resize_buffer_underflow;
int resize_count;
/*!\endcond */
} RATE_CONTROL;
/*!\cond */
struct AV1_COMP;
struct AV1EncoderConfig;
void av1_rc_init(const struct AV1EncoderConfig *oxcf, int pass,
RATE_CONTROL *rc);
int av1_estimate_bits_at_q(FRAME_TYPE frame_kind, int q, int mbs,
double correction_factor, aom_bit_depth_t bit_depth,
const int is_screen_content_type);
double av1_convert_qindex_to_q(int qindex, aom_bit_depth_t bit_depth);
void av1_rc_init_minq_luts(void);
int av1_rc_get_default_min_gf_interval(int width, int height, double framerate);
// Note av1_rc_get_default_max_gf_interval() requires the min_gf_interval to
// be passed in to ensure that the max_gf_interval returned is at least as bis
// as that.
int av1_rc_get_default_max_gf_interval(double framerate, int min_gf_interval);
// Generally at the high level, the following flow is expected
// to be enforced for rate control:
// First call per frame, one of:
// av1_rc_get_first_pass_params()
// av1_rc_get_second_pass_params()
// depending on the usage to set the rate control encode parameters desired.
//
// Then, call encode_frame_to_data_rate() to perform the
// actual encode. This function will in turn call encode_frame()
// one or more times, followed by one of:
// av1_rc_postencode_update()
// av1_rc_postencode_update_drop_frame()
//
// The majority of rate control parameters are only expected
// to be set in the av1_rc_get_..._params() functions and
// updated during the av1_rc_postencode_update...() functions.
// The only exceptions are av1_rc_drop_frame() and
// av1_rc_update_rate_correction_factors() functions.
// Functions to set parameters for encoding before the actual
// encode_frame_to_data_rate() function.
struct EncodeFrameParams;
// Post encode update of the rate control parameters based
// on bytes used
void av1_rc_postencode_update(struct AV1_COMP *cpi, uint64_t bytes_used);
// Post encode update of the rate control parameters for dropped frames
void av1_rc_postencode_update_drop_frame(struct AV1_COMP *cpi);
/*!\endcond */
/*!\brief Updates the rate correction factor linking Q to output bits
*
* This function updates the Q rate correction factor after an encode
* cycle depending on whether we overshot or undershot the target rate.
*
* \ingroup rate_control
* \param[in] cpi Top level encoder instance structure
* \param[in] width Frame width
* \param[in] height Frame height
*
* \return None but updates the relevant rate correction factor in cpi->rc
*/
void av1_rc_update_rate_correction_factors(struct AV1_COMP *cpi, int width,
int height);
/*!\cond */
// Decide if we should drop this frame: For 1-pass CBR.
// Changes only the decimation count in the rate control structure
int av1_rc_drop_frame(struct AV1_COMP *cpi);
// Computes frame size bounds.
void av1_rc_compute_frame_size_bounds(const struct AV1_COMP *cpi,
int this_frame_target,
int *frame_under_shoot_limit,
int *frame_over_shoot_limit);
/*!\endcond */
/*!\brief Picks q and q bounds given the rate control parameters in \c cpi->rc.
*
* \ingroup rate_control
* \param[in] cpi Top level encoder structure
* \param[in,out] rc Top level rate control structure
* \param[in] width Coded frame width
* \param[in] height Coded frame height
* \param[in] gf_index Index of this frame in the golden frame group
* \param[out] bottom_index Bottom bound for q index (best quality)
* \param[out] top_index Top bound for q index (worst quality)
* \return Returns selected q index to be used for encoding this frame.
* Also, updates \c rc->arf_q.
*/
int av1_rc_pick_q_and_bounds(const struct AV1_COMP *cpi, RATE_CONTROL *rc,
int width, int height, int gf_index,
int *bottom_index, int *top_index);
/*!\brief Estimates q to achieve a target bits per frame
*
* \ingroup rate_control
* \param[in] cpi Top level encoder instance structure
* \param[in] target_bits_per_frame Frame rate target
* \param[in] active_worst_quality Max Q allowed
* \param[in] active_best_quality Min Q allowed
* \param[in] width Frame width
* \param[in] height Frame height
*
* \return Returns a q index value
*/
int av1_rc_regulate_q(const struct AV1_COMP *cpi, int target_bits_per_frame,
int active_best_quality, int active_worst_quality,
int width, int height);
/*!\cond */
// Estimates bits per mb for a given qindex and correction factor.
int av1_rc_bits_per_mb(FRAME_TYPE frame_type, int qindex,
double correction_factor, aom_bit_depth_t bit_depth,
const int is_screen_content_type);
// Clamping utilities for bitrate targets for iframes and pframes.
int av1_rc_clamp_iframe_target_size(const struct AV1_COMP *const cpi,
int target);
int av1_rc_clamp_pframe_target_size(const struct AV1_COMP *const cpi,
int target, uint8_t frame_update_type);
// Find q_index corresponding to desired_q, within [best_qindex, worst_qindex].
// To be precise, 'q_index' is the smallest integer, for which the corresponding
// q >= desired_q.
// If no such q index is found, returns 'worst_qindex'.
int av1_find_qindex(double desired_q, aom_bit_depth_t bit_depth,
int best_qindex, int worst_qindex);
// Computes a q delta (in "q index" terms) to get from a starting q value
// to a target q value
int av1_compute_qdelta(const RATE_CONTROL *rc, double qstart, double qtarget,
aom_bit_depth_t bit_depth);
// Computes a q delta (in "q index" terms) to get from a starting q value
// to a value that should equate to the given rate ratio.
int av1_compute_qdelta_by_rate(const RATE_CONTROL *rc, FRAME_TYPE frame_type,
int qindex, double rate_target_ratio,
const int is_screen_content_type,
aom_bit_depth_t bit_depth);
int av1_frame_type_qdelta(const struct AV1_COMP *cpi, int q);
void av1_rc_update_framerate(struct AV1_COMP *cpi, int width, int height);
void av1_rc_set_gf_interval_range(const struct AV1_COMP *const cpi,
RATE_CONTROL *const rc);
void av1_set_target_rate(struct AV1_COMP *cpi, int width, int height);
int av1_resize_one_pass_cbr(struct AV1_COMP *cpi);
void av1_rc_set_frame_target(struct AV1_COMP *cpi, int target, int width,
int height);
void av1_set_reference_structure_one_pass_rt(struct AV1_COMP *cpi,
int gf_update);
/*!\endcond */
/*!\brief Calculates how many bits to use for a P frame in one pass vbr
*
* \ingroup rate_control
* \callgraph
* \callergraph
*
* \param[in] cpi Top level encoder structure
* \param[in] frame_update_type Type of frame
*
* \return Returns the target number of bits for this frame.
*/
int av1_calc_pframe_target_size_one_pass_vbr(
const struct AV1_COMP *const cpi, FRAME_UPDATE_TYPE frame_update_type);
/*!\brief Calculates how many bits to use for an i frame in one pass vbr
*
* \ingroup rate_control
* \callgraph
* \callergraph
*
* \param[in] cpi Top level encoder structure
*
* \return Returns the target number of bits for this frame.
*/
int av1_calc_iframe_target_size_one_pass_vbr(const struct AV1_COMP *const cpi);
/*!\brief Calculates how many bits to use for a P frame in one pass cbr
*
* \ingroup rate_control
* \callgraph
* \callergraph
*
* \param[in] cpi Top level encoder structure
* \param[in] frame_update_type Type of frame
*
* \return Returns the target number of bits for this frame.
*/
int av1_calc_pframe_target_size_one_pass_cbr(
const struct AV1_COMP *cpi, FRAME_UPDATE_TYPE frame_update_type);
/*!\brief Calculates how many bits to use for an i frame in one pass cbr
*
* \ingroup rate_control
* \callgraph
* \callergraph
*
* \param[in] cpi Top level encoder structure
*
* \return Returns the target number of bits for this frame.
*/
int av1_calc_iframe_target_size_one_pass_cbr(const struct AV1_COMP *cpi);
/*!\brief Setup the rate control parameters for 1 pass real-time mode.
*
* - Sets the frame type and target frame size.
* - Sets the GF update.
* - Checks for scene change.
* - Sets the reference prediction structure for 1 layers (non-SVC).
* - Resets and updates are done for SVC.
*
* \ingroup rate_control
* \param[in] cpi Top level encoder structure
* \param[in] frame_params Encoder frame parameters
* \param[in] frame_flags Emcoder frame flags
*
* \return Nothing is returned. Instead the settings computed in this
* funtion are set in: \c frame_params, \c cpi->common, \c cpi->rc, \c cpi->svc.
*/
void av1_get_one_pass_rt_params(struct AV1_COMP *cpi,
struct EncodeFrameParams *const frame_params,
unsigned int frame_flags);
/*!\brief Increase q on expected encoder overshoot, for CBR mode.
*
* Handles the case when encoder is expected to create a large frame:
* - q is increased to value closer to \c cpi->rc.worst_quality
* - avg_frame_qindex is reset
* - buffer levels are reset
* - rate correction factor is adjusted
*
* \ingroup rate_control
* \param[in] cpi Top level encoder structure
* \param[in] q Current q index
*
* \return q is returned, and updates are done to \c cpi->rc.
*/
int av1_encodedframe_overshoot_cbr(struct AV1_COMP *cpi, int *q);
#ifdef __cplusplus
} // extern "C"
#endif
#endif // AOM_AV1_ENCODER_RATECTRL_H_