| /* | |
| * Copyright (c) 2016, Alliance for Open Media. All rights reserved | |
| * | |
| * This source code is subject to the terms of the BSD 2 Clause License and | |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License | |
| * was not distributed with this source code in the LICENSE file, you can | |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open | |
| * Media Patent License 1.0 was not distributed with this source code in the | |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. | |
| */ | |
| #include <math.h> | |
| #include "aom_ports/mem.h" | |
| #include "av1/encoder/aq_variance.h" | |
| #include "av1/common/seg_common.h" | |
| #include "av1/encoder/encodeframe.h" | |
| #include "av1/encoder/ratectrl.h" | |
| #include "av1/encoder/rd.h" | |
| #include "av1/encoder/segmentation.h" | |
| #include "av1/encoder/dwt.h" | |
| #include "aom_ports/system_state.h" | |
| static const double rate_ratio[MAX_SEGMENTS] = { 2.2, 1.7, 1.3, 1.0, | |
| 0.9, .8, .7, .6 }; | |
| static const double deltaq_rate_ratio[MAX_SEGMENTS] = { 2.5, 2.0, 1.5, 1.0, | |
| 0.75, 1.0, 1.0, 1.0 }; | |
| #define ENERGY_MIN (-4) | |
| #define ENERGY_MAX (1) | |
| #define ENERGY_SPAN (ENERGY_MAX - ENERGY_MIN + 1) | |
| #define ENERGY_IN_BOUNDS(energy) \ | |
| assert((energy) >= ENERGY_MIN && (energy) <= ENERGY_MAX) | |
| DECLARE_ALIGNED(16, static const uint8_t, av1_all_zeros[MAX_SB_SIZE]) = { 0 }; | |
| DECLARE_ALIGNED(16, static const uint16_t, | |
| av1_highbd_all_zeros[MAX_SB_SIZE]) = { 0 }; | |
| static const int segment_id[ENERGY_SPAN] = { 0, 1, 1, 2, 3, 4 }; | |
| #define SEGMENT_ID(i) segment_id[(i)-ENERGY_MIN] | |
| void av1_vaq_frame_setup(AV1_COMP *cpi) { | |
| AV1_COMMON *cm = &cpi->common; | |
| struct segmentation *seg = &cm->seg; | |
| int i; | |
| int resolution_change = | |
| cm->prev_frame && (cm->width != cm->prev_frame->width || | |
| cm->height != cm->prev_frame->height); | |
| int avg_energy = (int)(cpi->twopass.mb_av_energy - 2); | |
| double avg_ratio; | |
| if (avg_energy > 7) avg_energy = 7; | |
| if (avg_energy < 0) avg_energy = 0; | |
| avg_ratio = rate_ratio[avg_energy]; | |
| if (resolution_change) { | |
| memset(cpi->segmentation_map, 0, cm->mi_rows * cm->mi_cols); | |
| av1_clearall_segfeatures(seg); | |
| aom_clear_system_state(); | |
| av1_disable_segmentation(seg); | |
| return; | |
| } | |
| if (frame_is_intra_only(cm) || cm->error_resilient_mode || | |
| cpi->refresh_alt_ref_frame || | |
| (cpi->refresh_golden_frame && !cpi->rc.is_src_frame_alt_ref)) { | |
| cpi->vaq_refresh = 1; | |
| av1_enable_segmentation(seg); | |
| av1_clearall_segfeatures(seg); | |
| aom_clear_system_state(); | |
| for (i = 0; i < MAX_SEGMENTS; ++i) { | |
| // Set up avg segment id to be 1.0 and adjust the other segments around | |
| // it. | |
| int qindex_delta = av1_compute_qdelta_by_rate( | |
| &cpi->rc, cm->current_frame.frame_type, cm->base_qindex, | |
| rate_ratio[i] / avg_ratio, cm->seq_params.bit_depth); | |
| // We don't allow qindex 0 in a segment if the base value is not 0. | |
| // Q index 0 (lossless) implies 4x4 encoding only and in AQ mode a segment | |
| // Q delta is sometimes applied without going back around the rd loop. | |
| // This could lead to an illegal combination of partition size and q. | |
| if ((cm->base_qindex != 0) && ((cm->base_qindex + qindex_delta) == 0)) { | |
| qindex_delta = -cm->base_qindex + 1; | |
| } | |
| av1_set_segdata(seg, i, SEG_LVL_ALT_Q, qindex_delta); | |
| av1_enable_segfeature(seg, i, SEG_LVL_ALT_Q); | |
| } | |
| } | |
| } | |
| int av1_log_block_var(const AV1_COMP *cpi, MACROBLOCK *x, BLOCK_SIZE bs) { | |
| // This functions returns a score for the blocks local variance as calculated | |
| // by: sum of the log of the (4x4 variances) of each subblock to the current | |
| // block (x,bs) | |
| // * 32 / number of pixels in the block_size. | |
| // This is used for segmentation because to avoid situations in which a large | |
| // block with a gentle gradient gets marked high variance even though each | |
| // subblock has a low variance. This allows us to assign the same segment | |
| // number for the same sorts of area regardless of how the partitioning goes. | |
| MACROBLOCKD *xd = &x->e_mbd; | |
| double var = 0; | |
| unsigned int sse; | |
| int i, j; | |
| int right_overflow = | |
| (xd->mb_to_right_edge < 0) ? ((-xd->mb_to_right_edge) >> 3) : 0; | |
| int bottom_overflow = | |
| (xd->mb_to_bottom_edge < 0) ? ((-xd->mb_to_bottom_edge) >> 3) : 0; | |
| const int bw = MI_SIZE * mi_size_wide[bs] - right_overflow; | |
| const int bh = MI_SIZE * mi_size_high[bs] - bottom_overflow; | |
| aom_clear_system_state(); | |
| for (i = 0; i < bh; i += 4) { | |
| for (j = 0; j < bw; j += 4) { | |
| if (is_cur_buf_hbd(xd)) { | |
| var += | |
| log(1.0 + cpi->fn_ptr[BLOCK_4X4].vf( | |
| x->plane[0].src.buf + i * x->plane[0].src.stride + j, | |
| x->plane[0].src.stride, | |
| CONVERT_TO_BYTEPTR(av1_highbd_all_zeros), 0, &sse) / | |
| 16); | |
| } else { | |
| var += | |
| log(1.0 + cpi->fn_ptr[BLOCK_4X4].vf( | |
| x->plane[0].src.buf + i * x->plane[0].src.stride + j, | |
| x->plane[0].src.stride, av1_all_zeros, 0, &sse) / | |
| 16); | |
| } | |
| } | |
| } | |
| // Use average of 4x4 log variance. The range for 8 bit 0 - 9.704121561. | |
| var /= (bw / 4 * bh / 4); | |
| if (var > 7) var = 7; | |
| aom_clear_system_state(); | |
| return (int)(var); | |
| } | |
| #define DEFAULT_E_MIDPOINT 10.0 | |
| static unsigned int haar_ac_energy(MACROBLOCK *x, BLOCK_SIZE bs) { | |
| MACROBLOCKD *xd = &x->e_mbd; | |
| int stride = x->plane[0].src.stride; | |
| uint8_t *buf = x->plane[0].src.buf; | |
| const int bw = MI_SIZE * mi_size_wide[bs]; | |
| const int bh = MI_SIZE * mi_size_high[bs]; | |
| const int hbd = is_cur_buf_hbd(xd); | |
| int var = 0; | |
| for (int r = 0; r < bh; r += 8) | |
| for (int c = 0; c < bw; c += 8) { | |
| var += av1_haar_ac_sad_8x8_uint8_input(buf + c + r * stride, stride, hbd); | |
| } | |
| return (unsigned int)((uint64_t)var * 256) >> num_pels_log2_lookup[bs]; | |
| } | |
| double av1_log_block_wavelet_energy(MACROBLOCK *x, BLOCK_SIZE bs) { | |
| unsigned int haar_sad = haar_ac_energy(x, bs); | |
| aom_clear_system_state(); | |
| return log(haar_sad + 1.0); | |
| } | |
| int av1_block_wavelet_energy_level(const AV1_COMP *cpi, MACROBLOCK *x, | |
| BLOCK_SIZE bs) { | |
| double energy, energy_midpoint; | |
| aom_clear_system_state(); | |
| energy_midpoint = (cpi->oxcf.pass == 2) ? cpi->twopass.frame_avg_haar_energy | |
| : DEFAULT_E_MIDPOINT; | |
| energy = av1_log_block_wavelet_energy(x, bs) - energy_midpoint; | |
| return clamp((int)round(energy), ENERGY_MIN, ENERGY_MAX); | |
| } | |
| int av1_compute_q_from_energy_level_deltaq_mode(const AV1_COMP *const cpi, | |
| int block_var_level) { | |
| int rate_level; | |
| const AV1_COMMON *const cm = &cpi->common; | |
| if (DELTA_Q_PERCEPTUAL_MODULATION == 1) { | |
| ENERGY_IN_BOUNDS(block_var_level); | |
| rate_level = SEGMENT_ID(block_var_level); | |
| } else { | |
| rate_level = block_var_level; | |
| } | |
| int qindex_delta = av1_compute_qdelta_by_rate( | |
| &cpi->rc, cm->current_frame.frame_type, cm->base_qindex, | |
| deltaq_rate_ratio[rate_level], cm->seq_params.bit_depth); | |
| if ((cm->base_qindex != 0) && ((cm->base_qindex + qindex_delta) == 0)) { | |
| qindex_delta = -cm->base_qindex + 1; | |
| } | |
| return cm->base_qindex + qindex_delta; | |
| } |