blob: 621835a93a100724dd97af2b1a67606acaf07ef8 [file] [log] [blame]
/*
* Copyright (c) 2016, Alliance for Open Media. All rights reserved
*
* This source code is subject to the terms of the BSD 2 Clause License and
* the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License
* was not distributed with this source code in the LICENSE file, you can
* obtain it at www.aomedia.org/license/software. If the Alliance for Open
* Media Patent License 1.0 was not distributed with this source code in the
* PATENTS file, you can obtain it at www.aomedia.org/license/patent.
*/
#ifndef AOM_AOM_AOMCX_H_
#define AOM_AOM_AOMCX_H_
/*!\defgroup aom_encoder AOMedia AOM/AV1 Encoder
* \ingroup aom
*
* @{
*/
#include "aom/aom.h"
#include "aom/aom_encoder.h"
#include "aom/aom_external_partition.h"
/*!\file
* \brief Provides definitions for using AOM or AV1 encoder algorithm within the
* aom Codec Interface.
*
* Several interfaces are excluded with CONFIG_REALTIME_ONLY build:
* Global motion
* Warped motion
* OBMC
* TPL model
* Loop restoration
*
* The following features are also disabled with CONFIG_REALTIME_ONLY:
* CNN
* 4X rectangular blocks
* 4X rectangular transform in intra prediction
*/
#ifdef __cplusplus
extern "C" {
#endif
/*!\name Algorithm interface for AV1
*
* This interface provides the capability to encode raw AV1 streams.
*@{
*/
/*!\brief A single instance of the AV1 encoder.
*\deprecated This access mechanism is provided for backwards compatibility;
* prefer aom_codec_av1_cx().
*/
extern aom_codec_iface_t aom_codec_av1_cx_algo;
/*!\brief The interface to the AV1 encoder.
*/
extern aom_codec_iface_t *aom_codec_av1_cx(void);
/*!@} - end algorithm interface member group */
/*
* Algorithm Flags
*/
/*!\brief Don't reference the last frame
*
* When this flag is set, the encoder will not use the last frame as a
* predictor. When not set, the encoder will choose whether to use the
* last frame or not automatically.
*/
#define AOM_EFLAG_NO_REF_LAST (1 << 16)
/*!\brief Don't reference the last2 frame
*
* When this flag is set, the encoder will not use the last2 frame as a
* predictor. When not set, the encoder will choose whether to use the
* last2 frame or not automatically.
*/
#define AOM_EFLAG_NO_REF_LAST2 (1 << 17)
/*!\brief Don't reference the last3 frame
*
* When this flag is set, the encoder will not use the last3 frame as a
* predictor. When not set, the encoder will choose whether to use the
* last3 frame or not automatically.
*/
#define AOM_EFLAG_NO_REF_LAST3 (1 << 18)
/*!\brief Don't reference the golden frame
*
* When this flag is set, the encoder will not use the golden frame as a
* predictor. When not set, the encoder will choose whether to use the
* golden frame or not automatically.
*/
#define AOM_EFLAG_NO_REF_GF (1 << 19)
/*!\brief Don't reference the alternate reference frame
*
* When this flag is set, the encoder will not use the alt ref frame as a
* predictor. When not set, the encoder will choose whether to use the
* alt ref frame or not automatically.
*/
#define AOM_EFLAG_NO_REF_ARF (1 << 20)
/*!\brief Don't reference the bwd reference frame
*
* When this flag is set, the encoder will not use the bwd ref frame as a
* predictor. When not set, the encoder will choose whether to use the
* bwd ref frame or not automatically.
*/
#define AOM_EFLAG_NO_REF_BWD (1 << 21)
/*!\brief Don't reference the alt2 reference frame
*
* When this flag is set, the encoder will not use the alt2 ref frame as a
* predictor. When not set, the encoder will choose whether to use the
* alt2 ref frame or not automatically.
*/
#define AOM_EFLAG_NO_REF_ARF2 (1 << 22)
/*!\brief Don't update the last frame
*
* When this flag is set, the encoder will not update the last frame with
* the contents of the current frame.
*/
#define AOM_EFLAG_NO_UPD_LAST (1 << 23)
/*!\brief Don't update the golden frame
*
* When this flag is set, the encoder will not update the golden frame with
* the contents of the current frame.
*/
#define AOM_EFLAG_NO_UPD_GF (1 << 24)
/*!\brief Don't update the alternate reference frame
*
* When this flag is set, the encoder will not update the alt ref frame with
* the contents of the current frame.
*/
#define AOM_EFLAG_NO_UPD_ARF (1 << 25)
/*!\brief Disable entropy update
*
* When this flag is set, the encoder will not update its internal entropy
* model based on the entropy of this frame.
*/
#define AOM_EFLAG_NO_UPD_ENTROPY (1 << 26)
/*!\brief Disable ref frame mvs
*
* When this flag is set, the encoder will not allow frames to
* be encoded using mfmv.
*/
#define AOM_EFLAG_NO_REF_FRAME_MVS (1 << 27)
/*!\brief Enable error resilient frame
*
* When this flag is set, the encoder will code frames as error
* resilient.
*/
#define AOM_EFLAG_ERROR_RESILIENT (1 << 28)
/*!\brief Enable s frame mode
*
* When this flag is set, the encoder will code frames as an
* s frame.
*/
#define AOM_EFLAG_SET_S_FRAME (1 << 29)
/*!\brief Force primary_ref_frame to PRIMARY_REF_NONE
*
* When this flag is set, the encoder will set a frame's primary_ref_frame
* to PRIMARY_REF_NONE
*/
#define AOM_EFLAG_SET_PRIMARY_REF_NONE (1 << 30)
/*!\brief AVx encoder control functions
*
* This set of macros define the control functions available for AVx
* encoder interface.
* The range of encode control ID is 7-229(max).
*
* \sa #aom_codec_control(aom_codec_ctx_t *ctx, int ctrl_id, ...)
*/
enum aome_enc_control_id {
/*!\brief Codec control function to set which reference frame encoder can use,
* int parameter.
*/
AOME_USE_REFERENCE = 7,
/*!\brief Codec control function to pass an ROI map to encoder, aom_roi_map_t*
* parameter.
*/
AOME_SET_ROI_MAP = 8,
/*!\brief Codec control function to pass an Active map to encoder,
* aom_active_map_t* parameter.
*/
AOME_SET_ACTIVEMAP = 9,
/* NOTE: enum 10 unused */
/*!\brief Codec control function to set encoder scaling mode,
* aom_scaling_mode_t* parameter.
*/
AOME_SET_SCALEMODE = 11,
/*!\brief Codec control function to set encoder spatial layer id, unsigned int
* parameter.
*/
AOME_SET_SPATIAL_LAYER_ID = 12,
/*!\brief Codec control function to set encoder internal speed settings,
* int parameter
*
* Changes in this value influences the complexity of algorithms used in
* encoding process, values greater than 0 will increase encoder speed at
* the expense of quality.
*
* Valid range: 0..9. 0 runs the slowest, and 9 runs the fastest;
* quality improves as speed decreases (since more compression
* possibilities are explored).
*/
AOME_SET_CPUUSED = 13,
/*!\brief Codec control function to enable automatic set and use alf frames,
* unsigned int parameter
*
* - 0 = disable
* - 1 = enable (default)
*/
AOME_SET_ENABLEAUTOALTREF = 14,
/* NOTE: enum 15 unused */
/*!\brief Codec control function to set the sharpness parameter,
* unsigned int parameter.
*
* This parameter controls the level at which rate-distortion optimization of
* transform coefficients favours sharpness in the block.
*
* Valid range: 0..7. The default is 0. Values 1-7 will avoid eob and skip
* block optimization and will change rdmult in favour of block sharpness.
*/
AOME_SET_SHARPNESS = AOME_SET_ENABLEAUTOALTREF + 2, // 16
/*!\brief Codec control function to set the threshold for MBs treated static,
* unsigned int parameter
*/
AOME_SET_STATIC_THRESHOLD = 17,
/* NOTE: enum 18 unused */
/*!\brief Codec control function to get last quantizer chosen by the encoder,
* int* parameter
*
* Return value uses internal quantizer scale defined by the codec.
*/
AOME_GET_LAST_QUANTIZER = AOME_SET_STATIC_THRESHOLD + 2, // 19
/*!\brief Codec control function to get last quantizer chosen by the encoder,
* int* parameter
*
* Return value uses the 0..63 scale as used by the rc_*_quantizer config
* parameters.
*/
AOME_GET_LAST_QUANTIZER_64 = 20,
/*!\brief Codec control function to set the max no of frames to create arf,
* unsigned int parameter
*/
AOME_SET_ARNR_MAXFRAMES = 21,
/*!\brief Codec control function to set the filter strength for the arf,
* unsigned int parameter
*/
AOME_SET_ARNR_STRENGTH = 22,
/* NOTE: enum 23 unused */
/*!\brief Codec control function to set visual tuning, aom_tune_metric (int)
* parameter
*
* The default is AOM_TUNE_PSNR.
*/
AOME_SET_TUNING = AOME_SET_ARNR_STRENGTH + 2, // 24
/*!\brief Codec control function to set constrained / constant quality level,
* unsigned int parameter
*
* Valid range: 0..63
*
* \attention For this value to be used aom_codec_enc_cfg_t::rc_end_usage
* must be set to #AOM_CQ or #AOM_Q.
*/
AOME_SET_CQ_LEVEL = 25,
/*!\brief Codec control function to set max data rate for intra frames,
* unsigned int parameter
*
* This value controls additional clamping on the maximum size of a
* keyframe. It is expressed as a percentage of the average
* per-frame bitrate, with the special (and default) value 0 meaning
* unlimited, or no additional clamping beyond the codec's built-in
* algorithm.
*
* For example, to allocate no more than 4.5 frames worth of bitrate
* to a keyframe, set this to 450.
*/
AOME_SET_MAX_INTRA_BITRATE_PCT = 26,
/*!\brief Codec control function to set number of spatial layers, int
* parameter
*/
AOME_SET_NUMBER_SPATIAL_LAYERS = 27,
/*!\brief Codec control function to set max data rate for inter frames,
* unsigned int parameter
*
* This value controls additional clamping on the maximum size of an
* inter frame. It is expressed as a percentage of the average
* per-frame bitrate, with the special (and default) value 0 meaning
* unlimited, or no additional clamping beyond the codec's built-in
* algorithm.
*
* For example, to allow no more than 4.5 frames worth of bitrate
* to an inter frame, set this to 450.
*/
AV1E_SET_MAX_INTER_BITRATE_PCT = AOME_SET_MAX_INTRA_BITRATE_PCT + 2, // 28
/*!\brief Boost percentage for Golden Frame in CBR mode, unsigned int
* parameter
*
* This value controls the amount of boost given to Golden Frame in
* CBR mode. It is expressed as a percentage of the average
* per-frame bitrate, with the special (and default) value 0 meaning
* the feature is off, i.e., no golden frame boost in CBR mode and
* average bitrate target is used.
*
* For example, to allow 100% more bits, i.e, 2X, in a golden frame
* than average frame, set this to 100.
*/
AV1E_SET_GF_CBR_BOOST_PCT = 29,
/* NOTE: enum 30 unused */
/*!\brief Codec control function to set lossless encoding mode, unsigned int
* parameter
*
* AV1 can operate in lossless encoding mode, in which the bitstream
* produced will be able to decode and reconstruct a perfect copy of
* input source.
*
* - 0 = normal coding mode, may be lossy (default)
* - 1 = lossless coding mode
*/
AV1E_SET_LOSSLESS = AV1E_SET_GF_CBR_BOOST_PCT + 2, // 31
/*!\brief Codec control function to enable the row based multi-threading
* of the encoder, unsigned int parameter
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ROW_MT = 32,
/*!\brief Codec control function to set number of tile columns. unsigned int
* parameter
*
* In encoding and decoding, AV1 allows an input image frame be partitioned
* into separate vertical tile columns, which can be encoded or decoded
* independently. This enables easy implementation of parallel encoding and
* decoding. The parameter for this control describes the number of tile
* columns (in log2 units), which has a valid range of [0, 6]:
* \verbatim
0 = 1 tile column
1 = 2 tile columns
2 = 4 tile columns
.....
n = 2**n tile columns
\endverbatim
* By default, the value is 0, i.e. one single column tile for entire image.
*/
AV1E_SET_TILE_COLUMNS = 33,
/*!\brief Codec control function to set number of tile rows, unsigned int
* parameter
*
* In encoding and decoding, AV1 allows an input image frame be partitioned
* into separate horizontal tile rows, which can be encoded or decoded
* independently. The parameter for this control describes the number of tile
* rows (in log2 units), which has a valid range of [0, 6]:
* \verbatim
0 = 1 tile row
1 = 2 tile rows
2 = 4 tile rows
.....
n = 2**n tile rows
\endverbatim
* By default, the value is 0, i.e. one single row tile for entire image.
*/
AV1E_SET_TILE_ROWS = 34,
/*!\brief Codec control function to enable RDO modulated by frame temporal
* dependency, unsigned int parameter
*
* - 0 = disable
* - 1 = enable (default)
*
* \note Excluded from CONFIG_REALTIME_ONLY build.
*/
AV1E_SET_ENABLE_TPL_MODEL = 35,
/*!\brief Codec control function to enable temporal filtering on key frame,
* unsigned int parameter
*
* - 0 = disable
* - 1 = enable without overlay (default)
* - 2 = enable with overlay
*/
AV1E_SET_ENABLE_KEYFRAME_FILTERING = 36,
/*!\brief Codec control function to enable frame parallel decoding feature,
* unsigned int parameter
*
* AV1 has a bitstream feature to reduce decoding dependency between frames
* by turning off backward update of probability context used in encoding
* and decoding. This allows staged parallel processing of more than one
* video frames in the decoder. This control function provides a means to
* turn this feature on or off for bitstreams produced by encoder.
*
* - 0 = disable (default)
* - 1 = enable
*/
AV1E_SET_FRAME_PARALLEL_DECODING = 37,
/*!\brief Codec control function to enable error_resilient_mode, int parameter
*
* AV1 has a bitstream feature to guarantee parseability of a frame
* by turning on the error_resilient_decoding mode, even though the
* reference buffers are unreliable or not received.
*
* - 0 = disable (default)
* - 1 = enable
*/
AV1E_SET_ERROR_RESILIENT_MODE = 38,
/*!\brief Codec control function to enable s_frame_mode, int parameter
*
* AV1 has a bitstream feature to designate certain frames as S-frames,
* from where we can switch to a different stream,
* even though the reference buffers may not be exactly identical.
*
* - 0 = disable (default)
* - 1 = enable
*/
AV1E_SET_S_FRAME_MODE = 39,
/*!\brief Codec control function to set adaptive quantization mode, unsigned
* int parameter
*
* AV1 has a segment based feature that allows encoder to adaptively change
* quantization parameter for each segment within a frame to improve the
* subjective quality. This control makes encoder operate in one of the
* several AQ modes supported.
*
* - 0 = disable (default)
* - 1 = variance
* - 2 = complexity
* - 3 = cyclic refresh
*/
AV1E_SET_AQ_MODE = 40,
/*!\brief Codec control function to enable/disable periodic Q boost, unsigned
* int parameter
*
* One AV1 encoder speed feature is to enable quality boost by lowering
* frame level Q periodically. This control function provides a means to
* turn on/off this feature.
*
* - 0 = disable (default)
* - 1 = enable
*/
AV1E_SET_FRAME_PERIODIC_BOOST = 41,
/*!\brief Codec control function to set noise sensitivity, unsigned int
* parameter
*
* - 0 = disable (default)
* - 1 = enable (Y only)
*/
AV1E_SET_NOISE_SENSITIVITY = 42,
/*!\brief Codec control function to set content type, aom_tune_content
* parameter
*
* - AOM_CONTENT_DEFAULT = Regular video content (default)
* - AOM_CONTENT_SCREEN = Screen capture content
* - AOM_CONTENT_FILM = Film content
*/
AV1E_SET_TUNE_CONTENT = 43,
/*!\brief Codec control function to set CDF update mode, unsigned int
* parameter
*
* - 0: no update
* - 1: update on every frame (default)
* - 2: selectively update
*/
AV1E_SET_CDF_UPDATE_MODE = 44,
/*!\brief Codec control function to set color space info, int parameter
*
* - 0 = For future use
* - 1 = BT.709
* - 2 = Unspecified (default)
* - 3 = For future use
* - 4 = BT.470 System M (historical)
* - 5 = BT.470 System B, G (historical)
* - 6 = BT.601
* - 7 = SMPTE 240
* - 8 = Generic film (color filters using illuminant C)
* - 9 = BT.2020, BT.2100
* - 10 = SMPTE 428 (CIE 1921 XYZ)
* - 11 = SMPTE RP 431-2
* - 12 = SMPTE EG 432-1
* - 13..21 = For future use
* - 22 = EBU Tech. 3213-E
* - 23 = For future use
*/
AV1E_SET_COLOR_PRIMARIES = 45,
/*!\brief Codec control function to set transfer function info, int parameter
*
* - 0 = For future use
* - 1 = BT.709
* - 2 = Unspecified (default)
* - 3 = For future use
* - 4 = BT.470 System M (historical)
* - 5 = BT.470 System B, G (historical)
* - 6 = BT.601
* - 7 = SMPTE 240 M
* - 8 = Linear
* - 9 = Logarithmic (100 : 1 range)
* - 10 = Logarithmic (100 * Sqrt(10) : 1 range)
* - 11 = IEC 61966-2-4
* - 12 = BT.1361
* - 13 = sRGB or sYCC
* - 14 = BT.2020 10-bit systems
* - 15 = BT.2020 12-bit systems
* - 16 = SMPTE ST 2084, ITU BT.2100 PQ
* - 17 = SMPTE ST 428
* - 18 = BT.2100 HLG, ARIB STD-B67
* - 19 = For future use
*/
AV1E_SET_TRANSFER_CHARACTERISTICS = 46,
/*!\brief Codec control function to set transfer function info, int parameter
*
* - 0 = Identity matrix
* - 1 = BT.709
* - 2 = Unspecified (default)
* - 3 = For future use
* - 4 = US FCC 73.628
* - 5 = BT.470 System B, G (historical)
* - 6 = BT.601
* - 7 = SMPTE 240 M
* - 8 = YCgCo
* - 9 = BT.2020 non-constant luminance, BT.2100 YCbCr
* - 10 = BT.2020 constant luminance
* - 11 = SMPTE ST 2085 YDzDx
* - 12 = Chromaticity-derived non-constant luminance
* - 13 = Chromaticity-derived constant luminance
* - 14 = BT.2100 ICtCp
* - 15 = For future use
*/
AV1E_SET_MATRIX_COEFFICIENTS = 47,
/*!\brief Codec control function to set chroma 4:2:0 sample position info,
* aom_chroma_sample_position_t parameter
*
* AOM_CSP_UNKNOWN is default
*/
AV1E_SET_CHROMA_SAMPLE_POSITION = 48,
/*!\brief Codec control function to set minimum interval between GF/ARF
* frames, unsigned int parameter
*
* By default the value is set as 4.
*/
AV1E_SET_MIN_GF_INTERVAL = 49,
/*!\brief Codec control function to set minimum interval between GF/ARF
* frames, unsigned int parameter
*
* By default the value is set as 16.
*/
AV1E_SET_MAX_GF_INTERVAL = 50,
/*!\brief Codec control function to get an active map back from the encoder,
aom_active_map_t* parameter
*/
AV1E_GET_ACTIVEMAP = 51,
/*!\brief Codec control function to set color range bit, int parameter
*
* - 0 = Limited range, 16..235 or HBD equivalent (default)
* - 1 = Full range, 0..255 or HBD equivalent
*/
AV1E_SET_COLOR_RANGE = 52,
/*!\brief Codec control function to set intended rendering image size,
* int32_t[2] parameter
*
* By default, this is identical to the image size in pixels.
*/
AV1E_SET_RENDER_SIZE = 53,
/*!\brief Control to set target sequence level index for a certain operating
* point(OP), int parameter
* Possible values are in the form of "ABxy"(pad leading zeros if less than
* 4 digits).
* - AB: OP index.
* - xy: Target level index for the OP. Can be values 0~23(corresponding to
* level 2.0 ~ 7.3) or 24(keep level stats only for level monitoring) or
* 31(maximum level parameter, no level-based constraints).
*
* E.g.:
* - "0" means target level index 0 for the 0th OP;
* - "111" means target level index 11 for the 1st OP;
* - "1021" means target level index 21 for the 10th OP.
*
* If the target level is not specified for an OP, the maximum level parameter
* of 31 is used as default.
*/
AV1E_SET_TARGET_SEQ_LEVEL_IDX = 54,
/*!\brief Codec control function to get sequence level index for each
* operating point. int* parameter. There can be at most 32 operating points.
* The results will be written into a provided integer array of sufficient
* size.
*/
AV1E_GET_SEQ_LEVEL_IDX = 55,
/*!\brief Codec control function to set intended superblock size, unsigned int
* parameter
*
* By default, the superblock size is determined separately for each
* frame by the encoder.
*/
AV1E_SET_SUPERBLOCK_SIZE = 56,
/*!\brief Codec control function to enable automatic set and use of
* bwd-pred frames, unsigned int parameter
*
* - 0 = disable (default)
* - 1 = enable
*/
AOME_SET_ENABLEAUTOBWDREF = 57,
/*!\brief Codec control function to encode with CDEF, unsigned int parameter
*
* CDEF is the constrained directional enhancement filter which is an
* in-loop filter aiming to remove coding artifacts
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_CDEF = 58,
/*!\brief Codec control function to encode with Loop Restoration Filter,
* unsigned int parameter
*
* - 0 = disable
* - 1 = enable (default)
*
* \note Excluded from CONFIG_REALTIME_ONLY build.
*/
AV1E_SET_ENABLE_RESTORATION = 59,
/*!\brief Codec control function to force video mode, unsigned int parameter
*
* - 0 = do not force video mode (default)
* - 1 = force video mode even for a single frame
*/
AV1E_SET_FORCE_VIDEO_MODE = 60,
/*!\brief Codec control function to predict with OBMC mode, unsigned int
* parameter
*
* - 0 = disable
* - 1 = enable (default)
*
* \note Excluded from CONFIG_REALTIME_ONLY build.
*/
AV1E_SET_ENABLE_OBMC = 61,
/*!\brief Codec control function to encode without trellis quantization,
* unsigned int parameter
*
* - 0 = apply trellis quantization (default)
* - 1 = do not apply trellis quantization
* - 2 = disable trellis quantization in rd search
* - 3 = disable trellis quantization in estimate yrd
*/
AV1E_SET_DISABLE_TRELLIS_QUANT = 62,
/*!\brief Codec control function to encode with quantisation matrices,
* unsigned int parameter
*
* AOM can operate with default quantisation matrices dependent on
* quantisation level and block type.
*
* - 0 = disable (default)
* - 1 = enable
*/
AV1E_SET_ENABLE_QM = 63,
/*!\brief Codec control function to set the min quant matrix flatness,
* unsigned int parameter
*
* AOM can operate with different ranges of quantisation matrices.
* As quantisation levels increase, the matrices get flatter. This
* control sets the minimum level of flatness from which the matrices
* are determined.
*
* By default, the encoder sets this minimum at half the available
* range.
*/
AV1E_SET_QM_MIN = 64,
/*!\brief Codec control function to set the max quant matrix flatness,
* unsigned int parameter
*
* AOM can operate with different ranges of quantisation matrices.
* As quantisation levels increase, the matrices get flatter. This
* control sets the maximum level of flatness possible.
*
* By default, the encoder sets this maximum at the top of the
* available range.
*/
AV1E_SET_QM_MAX = 65,
/*!\brief Codec control function to set the min quant matrix flatness,
* unsigned int parameter
*
* AOM can operate with different ranges of quantisation matrices.
* As quantisation levels increase, the matrices get flatter. This
* control sets the flatness for luma (Y).
*
* By default, the encoder sets this minimum at half the available
* range.
*/
AV1E_SET_QM_Y = 66,
/*!\brief Codec control function to set the min quant matrix flatness,
* unsigned int parameter
*
* AOM can operate with different ranges of quantisation matrices.
* As quantisation levels increase, the matrices get flatter. This
* control sets the flatness for chroma (U).
*
* By default, the encoder sets this minimum at half the available
* range.
*/
AV1E_SET_QM_U = 67,
/*!\brief Codec control function to set the min quant matrix flatness,
* unsigned int parameter
*
* AOM can operate with different ranges of quantisation matrices.
* As quantisation levels increase, the matrices get flatter. This
* control sets the flatness for chrome (V).
*
* By default, the encoder sets this minimum at half the available
* range.
*/
AV1E_SET_QM_V = 68,
/* NOTE: enum 69 unused */
/*!\brief Codec control function to set a maximum number of tile groups,
* unsigned int parameter
*
* This will set the maximum number of tile groups. This will be
* overridden if an MTU size is set. The default value is 1.
*/
AV1E_SET_NUM_TG = 70,
/*!\brief Codec control function to set an MTU size for a tile group, unsigned
* int parameter
*
* This will set the maximum number of bytes in a tile group. This can be
* exceeded only if a single tile is larger than this amount.
*
* By default, the value is 0, in which case a fixed number of tile groups
* is used.
*/
AV1E_SET_MTU = 71,
/* NOTE: enum 72 unused */
/*!\brief Codec control function to enable/disable rectangular partitions, int
* parameter
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_RECT_PARTITIONS = 73,
/*!\brief Codec control function to enable/disable AB partitions, int
* parameter
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_AB_PARTITIONS = 74,
/*!\brief Codec control function to enable/disable 1:4 and 4:1 partitions, int
* parameter
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_1TO4_PARTITIONS = 75,
/*!\brief Codec control function to set min partition size, int parameter
*
* min_partition_size is applied to both width and height of the partition.
* i.e, both width and height of a partition can not be smaller than
* the min_partition_size, except the partition at the picture boundary.
*
* Valid values: [4, 8, 16, 32, 64, 128]. The default value is 4 for
* 4x4.
*/
AV1E_SET_MIN_PARTITION_SIZE = 76,
/*!\brief Codec control function to set max partition size, int parameter
*
* max_partition_size is applied to both width and height of the partition.
* i.e, both width and height of a partition can not be larger than
* the max_partition_size.
*
* Valid values:[4, 8, 16, 32, 64, 128] The default value is 128 for
* 128x128.
*/
AV1E_SET_MAX_PARTITION_SIZE = 77,
/*!\brief Codec control function to turn on / off intra edge filter
* at sequence level, int parameter
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_INTRA_EDGE_FILTER = 78,
/*!\brief Codec control function to turn on / off frame order hint (int
* parameter). Affects: joint compound mode, motion field motion vector,
* ref frame sign bias
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_ORDER_HINT = 79,
/*!\brief Codec control function to turn on / off 64-length transforms, int
* parameter
*
* This will enable or disable usage of length 64 transforms in any
* direction.
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_TX64 = 80,
/*!\brief Codec control function to turn on / off flip and identity
* transforms, int parameter
*
* This will enable or disable usage of flip and identity transform
* types in any direction. If enabled, this includes:
* - FLIPADST_DCT
* - DCT_FLIPADST
* - FLIPADST_FLIPADST
* - ADST_FLIPADST
* - FLIPADST_ADST
* - IDTX
* - V_DCT
* - H_DCT
* - V_ADST
* - H_ADST
* - V_FLIPADST
* - H_FLIPADST
*
* Valid values:
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_FLIP_IDTX = 81,
/*!\brief Codec control function to turn on / off rectangular transforms, int
* parameter
*
* This will enable or disable usage of rectangular transforms. NOTE:
* Rectangular transforms only enabled when corresponding rectangular
* partitions are.
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_RECT_TX = 82,
/*!\brief Codec control function to turn on / off dist-wtd compound mode
* at sequence level, int parameter
*
* This will enable or disable distance-weighted compound mode.
* \attention If AV1E_SET_ENABLE_ORDER_HINT is 0, then this flag is forced
* to 0.
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_DIST_WTD_COMP = 83,
/*!\brief Codec control function to turn on / off ref frame mvs (mfmv) usage
* at sequence level, int parameter
*
* \attention If AV1E_SET_ENABLE_ORDER_HINT is 0, then this flag is forced
* to 0.
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_REF_FRAME_MVS = 84,
/*!\brief Codec control function to set temporal mv prediction
* enabling/disabling at frame level, int parameter
*
* \attention If AV1E_SET_ENABLE_REF_FRAME_MVS is 0, then this flag is
* forced to 0.
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ALLOW_REF_FRAME_MVS = 85,
/*!\brief Codec control function to turn on / off dual interpolation filter
* for a sequence, int parameter
*
* - 0 = disable
* - 1 = enable
*/
AV1E_SET_ENABLE_DUAL_FILTER = 86,
/*!\brief Codec control function to turn on / off delta quantization in chroma
* planes for a sequence, int parameter
*
* - 0 = disable (default)
* - 1 = enable
*/
AV1E_SET_ENABLE_CHROMA_DELTAQ = 87,
/*!\brief Codec control function to turn on / off masked compound usage
* (wedge and diff-wtd compound modes) for a sequence, int parameter
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_MASKED_COMP = 88,
/*!\brief Codec control function to turn on / off one sided compound usage
* for a sequence, int parameter
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_ONESIDED_COMP = 89,
/*!\brief Codec control function to turn on / off interintra compound
* for a sequence, int parameter
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_INTERINTRA_COMP = 90,
/*!\brief Codec control function to turn on / off smooth inter-intra
* mode for a sequence, int parameter
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_SMOOTH_INTERINTRA = 91,
/*!\brief Codec control function to turn on / off difference weighted
* compound, int parameter
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_DIFF_WTD_COMP = 92,
/*!\brief Codec control function to turn on / off interinter wedge
* compound, int parameter
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_INTERINTER_WEDGE = 93,
/*!\brief Codec control function to turn on / off interintra wedge
* compound, int parameter
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_INTERINTRA_WEDGE = 94,
/*!\brief Codec control function to turn on / off global motion usage
* for a sequence, int parameter
*
* - 0 = disable
* - 1 = enable (default)
*
* \note Excluded from CONFIG_REALTIME_ONLY build.
*/
AV1E_SET_ENABLE_GLOBAL_MOTION = 95,
/*!\brief Codec control function to turn on / off warped motion usage
* at sequence level, int parameter
*
* - 0 = disable
* - 1 = enable (default)
*
* \note Excluded from CONFIG_REALTIME_ONLY build.
*/
AV1E_SET_ENABLE_WARPED_MOTION = 96,
/*!\brief Codec control function to turn on / off warped motion usage
* at frame level, int parameter
*
* \attention If AV1E_SET_ENABLE_WARPED_MOTION is 0, then this flag is
* forced to 0.
*
* - 0 = disable
* - 1 = enable (default)
*
* \note Excluded from CONFIG_REALTIME_ONLY build.
*/
AV1E_SET_ALLOW_WARPED_MOTION = 97,
/*!\brief Codec control function to turn on / off filter intra usage at
* sequence level, int parameter
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_FILTER_INTRA = 98,
/*!\brief Codec control function to turn on / off smooth intra modes usage,
* int parameter
*
* This will enable or disable usage of smooth, smooth_h and smooth_v intra
* modes.
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_SMOOTH_INTRA = 99,
/*!\brief Codec control function to turn on / off Paeth intra mode usage, int
* parameter
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_PAETH_INTRA = 100,
/*!\brief Codec control function to turn on / off CFL uv intra mode usage, int
* parameter
*
* This will enable or disable usage of chroma-from-luma intra mode.
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_CFL_INTRA = 101,
/*!\brief Codec control function to turn on / off frame superresolution, int
* parameter
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_SUPERRES = 102,
/*!\brief Codec control function to turn on / off overlay frames for
* filtered ALTREF frames, int parameter
*
* This will enable or disable coding of overlay frames for filtered ALTREF
* frames. When set to 0, overlay frames are not used but show existing frame
* is used to display the filtered ALTREF frame as is. As a result the decoded
* frame rate remains the same as the display frame rate. The default is 1.
*/
AV1E_SET_ENABLE_OVERLAY = 103,
/*!\brief Codec control function to turn on/off palette mode, int parameter */
AV1E_SET_ENABLE_PALETTE = 104,
/*!\brief Codec control function to turn on/off intra block copy mode, int
parameter */
AV1E_SET_ENABLE_INTRABC = 105,
/*!\brief Codec control function to turn on/off intra angle delta, int
parameter */
AV1E_SET_ENABLE_ANGLE_DELTA = 106,
/*!\brief Codec control function to set the delta q mode, unsigned int
* parameter
*
* AV1 supports a delta q mode feature, that allows modulating q per
* superblock.
*
* - 0 = deltaq signaling off
* - 1 = use modulation to maximize objective quality (default)
* - 2 = use modulation for local test
* - 3 = use modulation for key frame perceptual quality optimization
*/
AV1E_SET_DELTAQ_MODE = 107,
/*!\brief Codec control function to turn on/off loopfilter modulation
* when delta q modulation is enabled, unsigned int parameter.
*
* \attention AV1 only supports loopfilter modulation when delta q
* modulation is enabled as well.
*/
AV1E_SET_DELTALF_MODE = 108,
/*!\brief Codec control function to set the single tile decoding mode,
* unsigned int parameter
*
* \attention Only applicable if large scale tiling is on.
*
* - 0 = single tile decoding is off
* - 1 = single tile decoding is on (default)
*/
AV1E_SET_SINGLE_TILE_DECODING = 109,
/*!\brief Codec control function to enable the extreme motion vector unit
* test, unsigned int parameter
*
* - 0 = off
* - 1 = MAX_EXTREME_MV
* - 2 = MIN_EXTREME_MV
*
* \note This is only used in motion vector unit test.
*/
AV1E_ENABLE_MOTION_VECTOR_UNIT_TEST = 110,
/*!\brief Codec control function to signal picture timing info in the
* bitstream, aom_timing_info_type_t parameter. Default is
* AOM_TIMING_UNSPECIFIED.
*/
AV1E_SET_TIMING_INFO_TYPE = 111,
/*!\brief Codec control function to add film grain parameters (one of several
* preset types) info in the bitstream, int parameter
*
Valid range: 0..16, 0 is unknown, 1..16 are test vectors
*/
AV1E_SET_FILM_GRAIN_TEST_VECTOR = 112,
/*!\brief Codec control function to set the path to the film grain parameters,
* const char* parameter
*/
AV1E_SET_FILM_GRAIN_TABLE = 113,
/*!\brief Sets the noise level, int parameter */
AV1E_SET_DENOISE_NOISE_LEVEL = 114,
/*!\brief Sets the denoisers block size, unsigned int parameter */
AV1E_SET_DENOISE_BLOCK_SIZE = 115,
/*!\brief Sets the chroma subsampling x value, unsigned int parameter */
AV1E_SET_CHROMA_SUBSAMPLING_X = 116,
/*!\brief Sets the chroma subsampling y value, unsigned int parameter */
AV1E_SET_CHROMA_SUBSAMPLING_Y = 117,
/*!\brief Control to use a reduced tx type set, int parameter */
AV1E_SET_REDUCED_TX_TYPE_SET = 118,
/*!\brief Control to use dct only for intra modes, int parameter */
AV1E_SET_INTRA_DCT_ONLY = 119,
/*!\brief Control to use dct only for inter modes, int parameter */
AV1E_SET_INTER_DCT_ONLY = 120,
/*!\brief Control to use default tx type only for intra modes, int parameter
*/
AV1E_SET_INTRA_DEFAULT_TX_ONLY = 121,
/*!\brief Control to use adaptive quantize_b, int parameter */
AV1E_SET_QUANT_B_ADAPT = 122,
/*!\brief Control to select maximum height for the GF group pyramid structure,
* unsigned int parameter
*
* Valid range: 0..5
*/
AV1E_SET_GF_MAX_PYRAMID_HEIGHT = 123,
/*!\brief Control to select maximum reference frames allowed per frame, int
* parameter
*
* Valid range: 3..7
*/
AV1E_SET_MAX_REFERENCE_FRAMES = 124,
/*!\brief Control to use reduced set of single and compound references, int
parameter */
AV1E_SET_REDUCED_REFERENCE_SET = 125,
/*!\brief Control to set frequency of the cost updates for coefficients,
* unsigned int parameter
*
* - 0 = update at SB level (default)
* - 1 = update at SB row level in tile
* - 2 = update at tile level
* - 3 = turn off
*/
AV1E_SET_COEFF_COST_UPD_FREQ = 126,
/*!\brief Control to set frequency of the cost updates for mode, unsigned int
* parameter
*
* - 0 = update at SB level (default)
* - 1 = update at SB row level in tile
* - 2 = update at tile level
* - 3 = turn off
*/
AV1E_SET_MODE_COST_UPD_FREQ = 127,
/*!\brief Control to set frequency of the cost updates for motion vectors,
* unsigned int parameter
*
* - 0 = update at SB level (default)
* - 1 = update at SB row level in tile
* - 2 = update at tile level
* - 3 = turn off
*/
AV1E_SET_MV_COST_UPD_FREQ = 128,
/*!\brief Control to set bit mask that specifies which tier each of the 32
* possible operating points conforms to, unsigned int parameter
*
* - 0 = main tier (default)
* - 1 = high tier
*/
AV1E_SET_TIER_MASK = 129,
/*!\brief Control to set minimum compression ratio, unsigned int parameter
* Take integer values. If non-zero, encoder will try to keep the compression
* ratio of each frame to be higher than the given value divided by 100.
* E.g. 850 means minimum compression ratio of 8.5.
*/
AV1E_SET_MIN_CR = 130,
/* NOTE: enums 145-149 unused */
/*!\brief Codec control function to set the layer id, aom_svc_layer_id_t*
* parameter
*/
AV1E_SET_SVC_LAYER_ID = 131,
/*!\brief Codec control function to set SVC paramaeters, aom_svc_params_t*
* parameter
*/
AV1E_SET_SVC_PARAMS = 132,
/*!\brief Codec control function to set reference frame config:
* the ref_idx and the refresh flags for each buffer slot.
* aom_svc_ref_frame_config_t* parameter
*/
AV1E_SET_SVC_REF_FRAME_CONFIG = 133,
/*!\brief Codec control function to set the path to the VMAF model used when
* tuning the encoder for VMAF, const char* parameter
*/
AV1E_SET_VMAF_MODEL_PATH = 134,
/*!\brief Codec control function to enable EXT_TILE_DEBUG in AV1 encoder,
* unsigned int parameter
*
* - 0 = disable (default)
* - 1 = enable
*
* \note This is only used in lightfield example test.
*/
AV1E_ENABLE_EXT_TILE_DEBUG = 135,
/*!\brief Codec control function to enable the superblock multipass unit test
* in AV1 to ensure that the encoder does not leak state between different
* passes. unsigned int parameter.
*
* - 0 = disable (default)
* - 1 = enable
*
* \note This is only used in sb_multipass unit test.
*/
AV1E_ENABLE_SB_MULTIPASS_UNIT_TEST = 136,
/*!\brief Control to select minimum height for the GF group pyramid structure,
* unsigned int parameter
*
* Valid values: 0..5
*/
AV1E_SET_GF_MIN_PYRAMID_HEIGHT = 137,
/*!\brief Control to set average complexity of the corpus in the case of
* single pass vbr based on LAP, unsigned int parameter
*/
AV1E_SET_VBR_CORPUS_COMPLEXITY_LAP = 138,
/*!\brief Control to get baseline gf interval
*/
AV1E_GET_BASELINE_GF_INTERVAL = 139,
/*\brief Control to set encoding the denoised frame from denoise-noise-level
*
* - 0 = disabled/encode the original frame
* - 1 = enabled/encode the denoised frame (default)
*/
AV1E_SET_ENABLE_DNL_DENOISING = 140,
/*!\brief Codec control function to turn on / off D45 to D203 intra mode
* usage, int parameter
*
* This will enable or disable usage of D45 to D203 intra modes, whic hare a
* subset of directional modes. This control has no effect if directional
* modes are disabled (AV1E_SET_ENABLE_DIRECTIONAL_INTRA set to 0).
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_DIAGONAL_INTRA = 141,
/*!\brief Control to set frequency of the cost updates for intrabc motion
* vectors, unsigned int parameter
*
* - 0 = update at SB level (default)
* - 1 = update at SB row level in tile
* - 2 = update at tile level
* - 3 = turn off
*/
AV1E_SET_DV_COST_UPD_FREQ = 142,
/*!\brief Codec control to set the path for partition stats read and write.
* const char * parameter.
*/
AV1E_SET_PARTITION_INFO_PATH = 143,
/*!\brief Codec control to use an external partition model
* A set of callback functions is passed through this control
* to let the encoder encode with given partitions.
*/
AV1E_SET_EXTERNAL_PARTITION = 144,
/*!\brief Codec control function to turn on / off directional intra mode
* usage, int parameter
*
* - 0 = disable
* - 1 = enable (default)
*/
AV1E_SET_ENABLE_DIRECTIONAL_INTRA = 145,
/*!\brief Control to turn on / off transform size search.
*
* - 0 = disable, transforms always have the largest possible size
* - 1 = enable, search for the best transform size for each block (default)
*/
AV1E_SET_ENABLE_TX_SIZE_SEARCH = 146,
// Any new encoder control IDs should be added above.
// Maximum allowed encoder control ID is 229.
// No encoder control ID should be added below.
};
/*!\brief aom 1-D scaling mode
*
* This set of constants define 1-D aom scaling modes
*/
typedef enum aom_scaling_mode_1d {
AOME_NORMAL = 0,
AOME_FOURFIVE = 1,
AOME_THREEFIVE = 2,
AOME_THREEFOUR = 3,
AOME_ONEFOUR = 4,
AOME_ONEEIGHT = 5,
AOME_ONETWO = 6
} AOM_SCALING_MODE;
/*!\brief Max number of segments
*
* This is the limit of number of segments allowed within a frame.
*
* Currently same as "MAX_SEGMENTS" in AV1, the maximum that AV1 supports.
*
*/
#define AOM_MAX_SEGMENTS 8
/*!\brief aom region of interest map
*
* These defines the data structures for the region of interest map
*
* TODO(yaowu): create a unit test for ROI map related APIs
*
*/
typedef struct aom_roi_map {
/*! An id between 0 and 7 for each 8x8 region within a frame. */
unsigned char *roi_map;
unsigned int rows; /**< Number of rows. */
unsigned int cols; /**< Number of columns. */
int delta_q[AOM_MAX_SEGMENTS]; /**< Quantizer deltas. */
int delta_lf[AOM_MAX_SEGMENTS]; /**< Loop filter deltas. */
/*! Static breakout threshold for each segment. */
unsigned int static_threshold[AOM_MAX_SEGMENTS];
} aom_roi_map_t;
/*!\brief aom active region map
*
* These defines the data structures for active region map
*
*/
typedef struct aom_active_map {
/*!\brief specify an on (1) or off (0) each 16x16 region within a frame */
unsigned char *active_map;
unsigned int rows; /**< number of rows */
unsigned int cols; /**< number of cols */
} aom_active_map_t;
/*!\brief aom image scaling mode
*
* This defines the data structure for image scaling mode
*
*/
typedef struct aom_scaling_mode {
AOM_SCALING_MODE h_scaling_mode; /**< horizontal scaling mode */
AOM_SCALING_MODE v_scaling_mode; /**< vertical scaling mode */
} aom_scaling_mode_t;
/*!brief AV1 encoder content type */
typedef enum {
AOM_CONTENT_DEFAULT,
AOM_CONTENT_SCREEN,
AOM_CONTENT_FILM,
AOM_CONTENT_INVALID
} aom_tune_content;
/*!brief AV1 encoder timing info type signaling */
typedef enum {
AOM_TIMING_UNSPECIFIED,
AOM_TIMING_EQUAL,
AOM_TIMING_DEC_MODEL
} aom_timing_info_type_t;
/*!\brief Model tuning parameters
*
* Changes the encoder to tune for certain types of input material.
*
*/
typedef enum {
AOM_TUNE_PSNR = 0,
AOM_TUNE_SSIM = 1,
/* NOTE: enums 2 and 3 unused */
AOM_TUNE_VMAF_WITH_PREPROCESSING = 4,
AOM_TUNE_VMAF_WITHOUT_PREPROCESSING = 5,
AOM_TUNE_VMAF_MAX_GAIN = 6,
AOM_TUNE_VMAF_NEG_MAX_GAIN = 7,
AOM_TUNE_BUTTERAUGLI = 8,
} aom_tune_metric;
#define AOM_MAX_LAYERS 32 /**< Max number of layers */
#define AOM_MAX_SS_LAYERS 4 /**< Max number of spatial layers */
#define AOM_MAX_TS_LAYERS 8 /**< Max number of temporal layers */
/*!brief Struct for spatial and temporal layer ID */
typedef struct aom_svc_layer_id {
int spatial_layer_id; /**< Spatial layer ID */
int temporal_layer_id; /**< Temporal layer ID */
} aom_svc_layer_id_t;
/*!brief Parameter type for SVC */
typedef struct aom_svc_params {
int number_spatial_layers; /**< Number of spatial layers */
int number_temporal_layers; /**< Number of temporal layers */
int max_quantizers[AOM_MAX_LAYERS]; /**< Max Q for each layer */
int min_quantizers[AOM_MAX_LAYERS]; /**< Min Q for each layer */
int scaling_factor_num[AOM_MAX_SS_LAYERS]; /**< Scaling factor-numerator */
int scaling_factor_den[AOM_MAX_SS_LAYERS]; /**< Scaling factor-denominator */
/*! Target bitrate for each layer */
int layer_target_bitrate[AOM_MAX_LAYERS];
/*! Frame rate factor for each temporal layer */
int framerate_factor[AOM_MAX_TS_LAYERS];
} aom_svc_params_t;
/*!brief Parameters for setting ref frame config */
typedef struct aom_svc_ref_frame_config {
// 7 references: LAST_FRAME (0), LAST2_FRAME(1), LAST3_FRAME(2),
// GOLDEN_FRAME(3), BWDREF_FRAME(4), ALTREF2_FRAME(5), ALTREF_FRAME(6).
int reference[7]; /**< Reference flag for each of the 7 references. */
/*! Buffer slot index for each of 7 references. */
int ref_idx[7];
int refresh[8]; /**< Refresh flag for each of the 8 slots. */
} aom_svc_ref_frame_config_t;
/*!\cond */
/*!\brief Encoder control function parameter type
*
* Defines the data types that AOME/AV1E control functions take.
*
* \note Additional common controls are defined in aom.h.
*
* \note For each control ID "X", a macro-define of
* AOM_CTRL_X is provided. It is used at compile time to determine
* if the control ID is supported by the libaom library available,
* when the libaom version cannot be controlled.
*/
AOM_CTRL_USE_TYPE(AOME_USE_REFERENCE, int)
#define AOM_CTRL_AOME_USE_REFERENCE
AOM_CTRL_USE_TYPE(AOME_SET_ROI_MAP, aom_roi_map_t *)
#define AOM_CTRL_AOME_SET_ROI_MAP
AOM_CTRL_USE_TYPE(AOME_SET_ACTIVEMAP, aom_active_map_t *)
#define AOM_CTRL_AOME_SET_ACTIVEMAP
AOM_CTRL_USE_TYPE(AOME_SET_SCALEMODE, aom_scaling_mode_t *)
#define AOM_CTRL_AOME_SET_SCALEMODE
AOM_CTRL_USE_TYPE(AOME_SET_SPATIAL_LAYER_ID, unsigned int)
#define AOM_CTRL_AOME_SET_SPATIAL_LAYER_ID
AOM_CTRL_USE_TYPE(AOME_SET_CPUUSED, int)
#define AOM_CTRL_AOME_SET_CPUUSED
AOM_CTRL_USE_TYPE(AOME_SET_ENABLEAUTOALTREF, unsigned int)
#define AOM_CTRL_AOME_SET_ENABLEAUTOALTREF
AOM_CTRL_USE_TYPE(AOME_SET_ENABLEAUTOBWDREF, unsigned int)
#define AOM_CTRL_AOME_SET_ENABLEAUTOBWDREF
AOM_CTRL_USE_TYPE(AOME_SET_SHARPNESS, unsigned int)
#define AOM_CTRL_AOME_SET_SHARPNESS
AOM_CTRL_USE_TYPE(AOME_SET_STATIC_THRESHOLD, unsigned int)
#define AOM_CTRL_AOME_SET_STATIC_THRESHOLD
AOM_CTRL_USE_TYPE(AOME_SET_ARNR_MAXFRAMES, unsigned int)
#define AOM_CTRL_AOME_SET_ARNR_MAXFRAMES
AOM_CTRL_USE_TYPE(AOME_SET_ARNR_STRENGTH, unsigned int)
#define AOM_CTRL_AOME_SET_ARNR_STRENGTH
AOM_CTRL_USE_TYPE(AOME_SET_TUNING, int) /* aom_tune_metric */
#define AOM_CTRL_AOME_SET_TUNING
AOM_CTRL_USE_TYPE(AOME_SET_CQ_LEVEL, unsigned int)
#define AOM_CTRL_AOME_SET_CQ_LEVEL
AOM_CTRL_USE_TYPE(AV1E_SET_ROW_MT, unsigned int)
#define AOM_CTRL_AV1E_SET_ROW_MT
AOM_CTRL_USE_TYPE(AV1E_SET_TILE_COLUMNS, unsigned int)
#define AOM_CTRL_AV1E_SET_TILE_COLUMNS
AOM_CTRL_USE_TYPE(AV1E_SET_TILE_ROWS, unsigned int)
#define AOM_CTRL_AV1E_SET_TILE_ROWS
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_TPL_MODEL, unsigned int)
#define AOM_CTRL_AV1E_SET_ENABLE_TPL_MODEL
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_KEYFRAME_FILTERING, unsigned int)
#define AOM_CTRL_AV1E_SET_ENABLE_KEYFRAME_FILTERING
AOM_CTRL_USE_TYPE(AOME_GET_LAST_QUANTIZER, int *)
#define AOM_CTRL_AOME_GET_LAST_QUANTIZER
AOM_CTRL_USE_TYPE(AOME_GET_LAST_QUANTIZER_64, int *)
#define AOM_CTRL_AOME_GET_LAST_QUANTIZER_64
AOM_CTRL_USE_TYPE(AOME_SET_MAX_INTRA_BITRATE_PCT, unsigned int)
#define AOM_CTRL_AOME_SET_MAX_INTRA_BITRATE_PCT
AOM_CTRL_USE_TYPE(AOME_SET_MAX_INTER_BITRATE_PCT, unsigned int)
#define AOM_CTRL_AOME_SET_MAX_INTER_BITRATE_PCT
AOM_CTRL_USE_TYPE(AOME_SET_NUMBER_SPATIAL_LAYERS, int)
#define AOME_CTRL_AOME_SET_NUMBER_SPATIAL_LAYERS
AOM_CTRL_USE_TYPE(AV1E_SET_GF_CBR_BOOST_PCT, unsigned int)
#define AOM_CTRL_AV1E_SET_GF_CBR_BOOST_PCT
AOM_CTRL_USE_TYPE(AV1E_SET_LOSSLESS, unsigned int)
#define AOM_CTRL_AV1E_SET_LOSSLESS
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_CDEF, unsigned int)
#define AOM_CTRL_AV1E_SET_ENABLE_CDEF
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_RESTORATION, unsigned int)
#define AOM_CTRL_AV1E_SET_ENABLE_RESTORATION
AOM_CTRL_USE_TYPE(AV1E_SET_FORCE_VIDEO_MODE, unsigned int)
#define AOM_CTRL_AV1E_SET_FORCE_VIDEO_MODE
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_OBMC, unsigned int)
#define AOM_CTRL_AV1E_SET_ENABLE_OBMC
AOM_CTRL_USE_TYPE(AV1E_SET_DISABLE_TRELLIS_QUANT, unsigned int)
#define AOM_CTRL_AV1E_SET_DISABLE_TRELLIS_QUANT
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_QM, unsigned int)
#define AOM_CTRL_AV1E_SET_ENABLE_QM
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DIST_8X8, unsigned int)
#define AOM_CTRL_AV1E_SET_ENABLE_DIST_8X8
AOM_CTRL_USE_TYPE(AV1E_SET_QM_MIN, unsigned int)
#define AOM_CTRL_AV1E_SET_QM_MIN
AOM_CTRL_USE_TYPE(AV1E_SET_QM_MAX, unsigned int)
#define AOM_CTRL_AV1E_SET_QM_MAX
AOM_CTRL_USE_TYPE(AV1E_SET_QM_Y, unsigned int)
#define AOM_CTRL_AV1E_SET_QM_Y
AOM_CTRL_USE_TYPE(AV1E_SET_QM_U, unsigned int)
#define AOM_CTRL_AV1E_SET_QM_U
AOM_CTRL_USE_TYPE(AV1E_SET_QM_V, unsigned int)
#define AOM_CTRL_AV1E_SET_QM_V
AOM_CTRL_USE_TYPE(AV1E_SET_NUM_TG, unsigned int)
#define AOM_CTRL_AV1E_SET_NUM_TG
AOM_CTRL_USE_TYPE(AV1E_SET_MTU, unsigned int)
#define AOM_CTRL_AV1E_SET_MTU
AOM_CTRL_USE_TYPE(AV1E_SET_TIMING_INFO_TYPE, int) /* aom_timing_info_type_t */
#define AOM_CTRL_AV1E_SET_TIMING_INFO_TYPE
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_RECT_PARTITIONS, int)
#define AOM_CTRL_AV1E_SET_ENABLE_RECT_PARTITIONS
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_AB_PARTITIONS, int)
#define AOM_CTRL_AV1E_SET_ENABLE_AB_PARTITIONS
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_1TO4_PARTITIONS, int)
#define AOM_CTRL_AV1E_SET_ENABLE_1TO4_PARTITIONS
AOM_CTRL_USE_TYPE(AV1E_SET_MIN_PARTITION_SIZE, int)
#define AOM_CTRL_AV1E_SET_MIN_PARTITION_SIZE
AOM_CTRL_USE_TYPE(AV1E_SET_MAX_PARTITION_SIZE, int)
#define AOM_CTRL_AV1E_SET_MAX_PARTITION_SIZE
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_INTRA_EDGE_FILTER, int)
#define AOM_CTRL_AV1E_SET_ENABLE_INTRA_EDGE_FILTER
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_ORDER_HINT, int)
#define AOM_CTRL_AV1E_SET_ENABLE_ORDER_HINT
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_TX64, int)
#define AOM_CTRL_AV1E_SET_ENABLE_TX64
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_FLIP_IDTX, int)
#define AOM_CTRL_AV1E_SET_ENABLE_FLIP_IDTX
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_RECT_TX, int)
#define AOM_CTRL_AV1E_SET_ENABLE_RECT_TX
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DIST_WTD_COMP, int)
#define AOM_CTRL_AV1E_SET_ENABLE_DIST_WTD_COMP
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_REF_FRAME_MVS, int)
#define AOM_CTRL_AV1E_SET_ENABLE_REF_FRAME_MVS
AOM_CTRL_USE_TYPE(AV1E_SET_ALLOW_REF_FRAME_MVS, int)
#define AOM_CTRL_AV1E_SET_ALLOW_REF_FRAME_MVS
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DUAL_FILTER, int)
#define AOM_CTRL_AV1E_SET_ENABLE_DUAL_FILTER
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_CHROMA_DELTAQ, int)
#define AOM_CTRL_AV1E_SET_ENABLE_CHROMA_DELTAQ
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_MASKED_COMP, int)
#define AOM_CTRL_AV1E_SET_ENABLE_MASKED_COMP
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_ONESIDED_COMP, int)
#define AOM_CTRL_AV1E_SET_ENABLE_ONESIDED_COMP
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_INTERINTRA_COMP, int)
#define AOM_CTRL_AV1E_SET_ENABLE_INTERINTRA_COMP
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_SMOOTH_INTERINTRA, int)
#define AOM_CTRL_AV1E_SET_ENABLE_SMOOTH_INTERINTRA
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DIFF_WTD_COMP, int)
#define AOM_CTRL_AV1E_SET_ENABLE_DIFF_WTD_COMP
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_INTERINTER_WEDGE, int)
#define AOM_CTRL_AV1E_SET_ENABLE_INTERINTER_WEDGE
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_INTERINTRA_WEDGE, int)
#define AOM_CTRL_AV1E_SET_ENABLE_INTERINTRA_WEDGE
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_GLOBAL_MOTION, int)
#define AOM_CTRL_AV1E_SET_ENABLE_GLOBAL_MOTION
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_WARPED_MOTION, int)
#define AOM_CTRL_AV1E_SET_ENABLE_WARPED_MOTION
AOM_CTRL_USE_TYPE(AV1E_SET_ALLOW_WARPED_MOTION, int)
#define AOM_CTRL_AV1E_SET_ALLOW_WARPED_MOTION
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_FILTER_INTRA, int)
#define AOM_CTRL_AV1E_SET_ENABLE_FILTER_INTRA
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_SMOOTH_INTRA, int)
#define AOM_CTRL_AV1E_SET_ENABLE_SMOOTH_INTRA
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_PAETH_INTRA, int)
#define AOM_CTRL_AV1E_SET_ENABLE_PAETH_INTRA
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_CFL_INTRA, int)
#define AOM_CTRL_AV1E_SET_ENABLE_CFL_INTRA
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DIAGONAL_INTRA, int)
#define AOM_CTRL_AV1E_SET_ENABLE_DIAGONAL_INTRA
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_SUPERRES, int)
#define AOM_CTRL_AV1E_SET_ENABLE_SUPERRES
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_OVERLAY, int)
#define AOM_CTRL_AV1E_SET_ENABLE_OVERLAY
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_PALETTE, int)
#define AOM_CTRL_AV1E_SET_ENABLE_PALETTE
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_INTRABC, int)
#define AOM_CTRL_AV1E_SET_ENABLE_INTRABC
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_ANGLE_DELTA, int)
#define AOM_CTRL_AV1E_SET_ENABLE_ANGLE_DELTA
AOM_CTRL_USE_TYPE(AV1E_SET_FRAME_PARALLEL_DECODING, unsigned int)
#define AOM_CTRL_AV1E_SET_FRAME_PARALLEL_DECODING
AOM_CTRL_USE_TYPE(AV1E_SET_ERROR_RESILIENT_MODE, int)
#define AOM_CTRL_AV1E_SET_ERROR_RESILIENT_MODE
AOM_CTRL_USE_TYPE(AV1E_SET_S_FRAME_MODE, int)
#define AOM_CTRL_AV1E_SET_S_FRAME_MODE
AOM_CTRL_USE_TYPE(AV1E_SET_AQ_MODE, unsigned int)
#define AOM_CTRL_AV1E_SET_AQ_MODE
AOM_CTRL_USE_TYPE(AV1E_SET_DELTAQ_MODE, unsigned int)
#define AOM_CTRL_AV1E_SET_DELTAQ_MODE
AOM_CTRL_USE_TYPE(AV1E_SET_DELTALF_MODE, unsigned int)
#define AOM_CTRL_AV1E_SET_DELTALF_MODE
AOM_CTRL_USE_TYPE(AV1E_SET_FRAME_PERIODIC_BOOST, unsigned int)
#define AOM_CTRL_AV1E_SET_FRAME_PERIODIC_BOOST
AOM_CTRL_USE_TYPE(AV1E_SET_NOISE_SENSITIVITY, unsigned int)
#define AOM_CTRL_AV1E_SET_NOISE_SENSITIVITY
AOM_CTRL_USE_TYPE(AV1E_SET_TUNE_CONTENT, int) /* aom_tune_content */
#define AOM_CTRL_AV1E_SET_TUNE_CONTENT
AOM_CTRL_USE_TYPE(AV1E_SET_COLOR_PRIMARIES, int)
#define AOM_CTRL_AV1E_SET_COLOR_PRIMARIES
AOM_CTRL_USE_TYPE(AV1E_SET_TRANSFER_CHARACTERISTICS, int)
#define AOM_CTRL_AV1E_SET_TRANSFER_CHARACTERISTICS
AOM_CTRL_USE_TYPE(AV1E_SET_MATRIX_COEFFICIENTS, int)
#define AOM_CTRL_AV1E_SET_MATRIX_COEFFICIENTS
AOM_CTRL_USE_TYPE(AV1E_SET_CHROMA_SAMPLE_POSITION, int)
#define AOM_CTRL_AV1E_SET_CHROMA_SAMPLE_POSITION
AOM_CTRL_USE_TYPE(AV1E_SET_MIN_GF_INTERVAL, unsigned int)
#define AOM_CTRL_AV1E_SET_MIN_GF_INTERVAL
AOM_CTRL_USE_TYPE(AV1E_SET_MAX_GF_INTERVAL, unsigned int)
#define AOM_CTRL_AV1E_SET_MAX_GF_INTERVAL
AOM_CTRL_USE_TYPE(AV1E_GET_ACTIVEMAP, aom_active_map_t *)
#define AOM_CTRL_AV1E_GET_ACTIVEMAP
AOM_CTRL_USE_TYPE(AV1E_SET_COLOR_RANGE, int)
#define AOM_CTRL_AV1E_SET_COLOR_RANGE
#define AOM_CTRL_AV1E_SET_RENDER_SIZE
AOM_CTRL_USE_TYPE(AV1E_SET_RENDER_SIZE, int *)
AOM_CTRL_USE_TYPE(AV1E_SET_SUPERBLOCK_SIZE, unsigned int)
#define AOM_CTRL_AV1E_SET_SUPERBLOCK_SIZE
AOM_CTRL_USE_TYPE(AV1E_GET_SEQ_LEVEL_IDX, int *)
#define AOM_CTRL_AV1E_GET_SEQ_LEVEL_IDX
AOM_CTRL_USE_TYPE(AV1E_GET_BASELINE_GF_INTERVAL, int *)
#define AOM_CTRL_AV1E_GET_BASELINE_GF_INTERVAL
AOM_CTRL_USE_TYPE(AV1E_SET_SINGLE_TILE_DECODING, unsigned int)
#define AOM_CTRL_AV1E_SET_SINGLE_TILE_DECODING
AOM_CTRL_USE_TYPE(AV1E_ENABLE_MOTION_VECTOR_UNIT_TEST, unsigned int)
#define AOM_CTRL_AV1E_ENABLE_MOTION_VECTOR_UNIT_TEST
AOM_CTRL_USE_TYPE(AV1E_ENABLE_EXT_TILE_DEBUG, unsigned int)
#define AOM_CTRL_AV1E_ENABLE_EXT_TILE_DEBUG
AOM_CTRL_USE_TYPE(AV1E_SET_VMAF_MODEL_PATH, const char *)
#define AOM_CTRL_AV1E_SET_VMAF_MODEL_PATH
AOM_CTRL_USE_TYPE(AV1E_SET_FILM_GRAIN_TEST_VECTOR, int)
#define AOM_CTRL_AV1E_SET_FILM_GRAIN_TEST_VECTOR
AOM_CTRL_USE_TYPE(AV1E_SET_FILM_GRAIN_TABLE, const char *)
#define AOM_CTRL_AV1E_SET_FILM_GRAIN_TABLE
AOM_CTRL_USE_TYPE(AV1E_SET_CDF_UPDATE_MODE, unsigned int)
#define AOM_CTRL_AV1E_SET_CDF_UPDATE_MODE
AOM_CTRL_USE_TYPE(AV1E_SET_DENOISE_NOISE_LEVEL, int)
#define AOM_CTRL_AV1E_SET_DENOISE_NOISE_LEVEL
AOM_CTRL_USE_TYPE(AV1E_SET_DENOISE_BLOCK_SIZE, unsigned int)
#define AOM_CTRL_AV1E_SET_DENOISE_BLOCK_SIZE
AOM_CTRL_USE_TYPE(AV1E_SET_CHROMA_SUBSAMPLING_X, unsigned int)
#define AOM_CTRL_AV1E_SET_CHROMA_SUBSAMPLING_X
AOM_CTRL_USE_TYPE(AV1E_SET_CHROMA_SUBSAMPLING_Y, unsigned int)
#define AOM_CTRL_AV1E_SET_CHROMA_SUBSAMPLING_Y
AOM_CTRL_USE_TYPE(AV1E_SET_REDUCED_TX_TYPE_SET, int)
#define AOM_CTRL_AV1E_SET_REDUCED_TX_TYPE_SET
AOM_CTRL_USE_TYPE(AV1E_SET_INTRA_DCT_ONLY, int)
#define AOM_CTRL_AV1E_SET_INTRA_DCT_ONLY
AOM_CTRL_USE_TYPE(AV1E_SET_INTER_DCT_ONLY, int)
#define AOM_CTRL_AV1E_SET_INTER_DCT_ONLY
AOM_CTRL_USE_TYPE(AV1E_SET_INTRA_DEFAULT_TX_ONLY, int)
#define AOM_CTRL_AV1E_SET_INTRA_DEFAULT_TX_ONLY
AOM_CTRL_USE_TYPE(AV1E_SET_QUANT_B_ADAPT, int)
#define AOM_CTRL_AV1E_SET_QUANT_B_ADAPT
AOM_CTRL_USE_TYPE(AV1E_SET_GF_MIN_PYRAMID_HEIGHT, unsigned int)
#define AOM_CTRL_AV1E_SET_GF_MIN_PYRAMID_HEIGHT
AOM_CTRL_USE_TYPE(AV1E_SET_GF_MAX_PYRAMID_HEIGHT, unsigned int)
#define AOM_CTRL_AV1E_SET_GF_MAX_PYRAMID_HEIGHT
AOM_CTRL_USE_TYPE(AV1E_SET_MAX_REFERENCE_FRAMES, int)
#define AOM_CTRL_AV1E_SET_MAX_REFERENCE_FRAMES
AOM_CTRL_USE_TYPE(AV1E_SET_REDUCED_REFERENCE_SET, int)
#define AOM_CTRL_AV1E_SET_REDUCED_REFERENCE_SET
AOM_CTRL_USE_TYPE(AV1E_SET_COEFF_COST_UPD_FREQ, unsigned int)
#define AOM_CTRL_AV1E_SET_COEFF_COST_UPD_FREQ
AOM_CTRL_USE_TYPE(AV1E_SET_MODE_COST_UPD_FREQ, unsigned int)
#define AOM_CTRL_AV1E_SET_MODE_COST_UPD_FREQ
AOM_CTRL_USE_TYPE(AV1E_SET_MV_COST_UPD_FREQ, unsigned int)
#define AOM_CTRL_AV1E_SET_MV_COST_UPD_FREQ
AOM_CTRL_USE_TYPE(AV1E_SET_TARGET_SEQ_LEVEL_IDX, int)
#define AOM_CTRL_AV1E_SET_TARGET_SEQ_LEVEL_IDX
AOM_CTRL_USE_TYPE(AV1E_SET_TIER_MASK, unsigned int)
#define AOM_CTRL_AV1E_SET_TIER_MASK
AOM_CTRL_USE_TYPE(AV1E_SET_MIN_CR, unsigned int)
#define AOM_CTRL_AV1E_SET_MIN_CR
AOM_CTRL_USE_TYPE(AV1E_SET_SVC_LAYER_ID, aom_svc_layer_id_t *)
#define AOME_CTRL_AV1E_SET_SVC_LAYER_ID
AOM_CTRL_USE_TYPE(AV1E_SET_SVC_PARAMS, aom_svc_params_t *)
#define AOME_CTRL_AV1E_SET_SVC_PARAMS
AOM_CTRL_USE_TYPE(AV1E_SET_SVC_REF_FRAME_CONFIG, aom_svc_ref_frame_config_t *)
#define AOME_CTRL_AV1E_SET_SVC_REF_FRAME_CONFIG
AOM_CTRL_USE_TYPE(AV1E_ENABLE_SB_MULTIPASS_UNIT_TEST, unsigned int)
#define AOM_CTRL_AV1E_ENABLE_SB_MULTIPASS_UNIT_TEST
AOM_CTRL_USE_TYPE(AV1E_SET_VBR_CORPUS_COMPLEXITY_LAP, unsigned int)
#define AOM_CTRL_AV1E_SET_VBR_CORPUS_COMPLEXITY_LAP
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DNL_DENOISING, int)
#define AOM_CTRL_AV1E_SET_ENABLE_DNL_DENOISING
AOM_CTRL_USE_TYPE(AV1E_SET_DV_COST_UPD_FREQ, unsigned int)
#define AOM_CTRL_AV1E_SET_DV_COST_UPD_FREQ
AOM_CTRL_USE_TYPE(AV1E_SET_PARTITION_INFO_PATH, const char *)
#define AOM_CTRL_AV1E_SET_PARTITION_INFO_PATH
AOM_CTRL_USE_TYPE(AV1E_SET_EXTERNAL_PARTITION, aom_ext_part_funcs_t *)
#define AOM_CTRL_AV1E_SET_EXTERNAL_PARTITION
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_DIRECTIONAL_INTRA, int)
#define AOM_CTRL_AV1E_SET_ENABLE_DIRECTIONAL_INTRA
AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_TX_SIZE_SEARCH, int)
#define AOM_CTRL_AV1E_SET_ENABLE_TX_SIZE_SEARCH
/*!\endcond */
/*! @} - end defgroup aom_encoder */
#ifdef __cplusplus
} // extern "C"
#endif
#endif // AOM_AOM_AOMCX_H_