| /* | |
| * Copyright (c) 2016, Alliance for Open Media. All rights reserved | |
| * | |
| * This source code is subject to the terms of the BSD 2 Clause License and | |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License | |
| * was not distributed with this source code in the LICENSE file, you can | |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open | |
| * Media Patent License 1.0 was not distributed with this source code in the | |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. | |
| */ | |
| #include "./aom_dsp_rtcd.h" | |
| #include "av1/common/filter.h" | |
| #include "av1/common/scale.h" | |
| #include "aom_dsp/aom_filter.h" | |
| // Note: Expect val to be in q4 precision | |
| static INLINE int scaled_x(int val, const struct scale_factors *sf) { | |
| const int off = | |
| (sf->x_scale_fp - (1 << REF_SCALE_SHIFT)) * (1 << (SUBPEL_BITS - 1)); | |
| const int64_t tval = (int64_t)val * sf->x_scale_fp + off; | |
| return (int)ROUND_POWER_OF_TWO_SIGNED_64(tval, | |
| REF_SCALE_SHIFT - SCALE_EXTRA_BITS); | |
| } | |
| // Note: Expect val to be in q4 precision | |
| static INLINE int scaled_y(int val, const struct scale_factors *sf) { | |
| const int off = | |
| (sf->y_scale_fp - (1 << REF_SCALE_SHIFT)) * (1 << (SUBPEL_BITS - 1)); | |
| const int64_t tval = (int64_t)val * sf->y_scale_fp + off; | |
| return (int)ROUND_POWER_OF_TWO_SIGNED_64(tval, | |
| REF_SCALE_SHIFT - SCALE_EXTRA_BITS); | |
| } | |
| // Note: Expect val to be in q4 precision | |
| static int unscaled_value(int val, const struct scale_factors *sf) { | |
| (void)sf; | |
| return val << SCALE_EXTRA_BITS; | |
| } | |
| static int get_fixed_point_scale_factor(int other_size, int this_size) { | |
| // Calculate scaling factor once for each reference frame | |
| // and use fixed point scaling factors in decoding and encoding routines. | |
| // Hardware implementations can calculate scale factor in device driver | |
| // and use multiplication and shifting on hardware instead of division. | |
| return ((other_size << REF_SCALE_SHIFT) + this_size / 2) / this_size; | |
| } | |
| // Given the fixed point scale, calculate coarse point scale. | |
| static int fixed_point_scale_to_coarse_point_scale(int scale_fp) { | |
| return ROUND_POWER_OF_TWO(scale_fp, REF_SCALE_SHIFT - SCALE_SUBPEL_BITS); | |
| } | |
| // Note: x and y are integer precision, mvq4 is q4 precision. | |
| MV32 av1_scale_mv(const MV *mvq4, int x, int y, | |
| const struct scale_factors *sf) { | |
| const int x_off_q4 = scaled_x(x << SUBPEL_BITS, sf); | |
| const int y_off_q4 = scaled_y(y << SUBPEL_BITS, sf); | |
| const MV32 res = { scaled_y((y << SUBPEL_BITS) + mvq4->row, sf) - y_off_q4, | |
| scaled_x((x << SUBPEL_BITS) + mvq4->col, sf) - x_off_q4 }; | |
| return res; | |
| } | |
| #if CONFIG_HIGHBITDEPTH | |
| void av1_setup_scale_factors_for_frame(struct scale_factors *sf, int other_w, | |
| int other_h, int this_w, int this_h, | |
| int use_highbd) { | |
| #else | |
| void av1_setup_scale_factors_for_frame(struct scale_factors *sf, int other_w, | |
| int other_h, int this_w, int this_h) { | |
| #endif | |
| if (!valid_ref_frame_size(other_w, other_h, this_w, this_h)) { | |
| sf->x_scale_fp = REF_INVALID_SCALE; | |
| sf->y_scale_fp = REF_INVALID_SCALE; | |
| return; | |
| } | |
| sf->x_scale_fp = get_fixed_point_scale_factor(other_w, this_w); | |
| sf->y_scale_fp = get_fixed_point_scale_factor(other_h, this_h); | |
| sf->x_step_q4 = fixed_point_scale_to_coarse_point_scale(sf->x_scale_fp); | |
| sf->y_step_q4 = fixed_point_scale_to_coarse_point_scale(sf->y_scale_fp); | |
| if (av1_is_scaled(sf)) { | |
| sf->scale_value_x = scaled_x; | |
| sf->scale_value_y = scaled_y; | |
| } else { | |
| sf->scale_value_x = unscaled_value; | |
| sf->scale_value_y = unscaled_value; | |
| } | |
| // TODO(agrange): Investigate the best choice of functions to use here | |
| // for EIGHTTAP_SMOOTH. Since it is not interpolating, need to choose what | |
| // to do at full-pel offsets. The current selection, where the filter is | |
| // applied in one direction only, and not at all for 0,0, seems to give the | |
| // best quality, but it may be worth trying an additional mode that does | |
| // do the filtering on full-pel. | |
| if (sf->x_step_q4 == SCALE_SUBPEL_SHIFTS) { | |
| if (sf->y_step_q4 == SCALE_SUBPEL_SHIFTS) { | |
| // No scaling in either direction. | |
| sf->predict[0][0][0] = aom_convolve_copy; | |
| sf->predict[0][0][1] = aom_convolve_avg; | |
| sf->predict[0][1][0] = aom_convolve8_vert; | |
| sf->predict[0][1][1] = aom_convolve8_avg_vert; | |
| sf->predict[1][0][0] = aom_convolve8_horiz; | |
| sf->predict[1][0][1] = aom_convolve8_avg_horiz; | |
| } else { | |
| // No scaling in x direction. Must always scale in the y direction. | |
| sf->predict[0][0][0] = aom_convolve8_vert; | |
| sf->predict[0][0][1] = aom_convolve8_avg_vert; | |
| sf->predict[0][1][0] = aom_convolve8_vert; | |
| sf->predict[0][1][1] = aom_convolve8_avg_vert; | |
| sf->predict[1][0][0] = aom_convolve8; | |
| sf->predict[1][0][1] = aom_convolve8_avg; | |
| } | |
| } else { | |
| if (sf->y_step_q4 == SCALE_SUBPEL_SHIFTS) { | |
| // No scaling in the y direction. Must always scale in the x direction. | |
| sf->predict[0][0][0] = aom_convolve8_horiz; | |
| sf->predict[0][0][1] = aom_convolve8_avg_horiz; | |
| sf->predict[0][1][0] = aom_convolve8; | |
| sf->predict[0][1][1] = aom_convolve8_avg; | |
| sf->predict[1][0][0] = aom_convolve8_horiz; | |
| sf->predict[1][0][1] = aom_convolve8_avg_horiz; | |
| } else { | |
| // Must always scale in both directions. | |
| sf->predict[0][0][0] = aom_convolve8; | |
| sf->predict[0][0][1] = aom_convolve8_avg; | |
| sf->predict[0][1][0] = aom_convolve8; | |
| sf->predict[0][1][1] = aom_convolve8_avg; | |
| sf->predict[1][0][0] = aom_convolve8; | |
| sf->predict[1][0][1] = aom_convolve8_avg; | |
| } | |
| } | |
| // 2D subpel motion always gets filtered in both directions | |
| sf->predict[1][1][0] = aom_convolve8; | |
| sf->predict[1][1][1] = aom_convolve8_avg; | |
| #if CONFIG_HIGHBITDEPTH | |
| if (use_highbd) { | |
| if (sf->x_step_q4 == SCALE_SUBPEL_SHIFTS) { | |
| if (sf->y_step_q4 == SCALE_SUBPEL_SHIFTS) { | |
| // No scaling in either direction. | |
| sf->highbd_predict[0][0][0] = aom_highbd_convolve_copy; | |
| sf->highbd_predict[0][0][1] = aom_highbd_convolve_avg; | |
| sf->highbd_predict[0][1][0] = aom_highbd_convolve8_vert; | |
| sf->highbd_predict[0][1][1] = aom_highbd_convolve8_avg_vert; | |
| sf->highbd_predict[1][0][0] = aom_highbd_convolve8_horiz; | |
| sf->highbd_predict[1][0][1] = aom_highbd_convolve8_avg_horiz; | |
| } else { | |
| // No scaling in x direction. Must always scale in the y direction. | |
| sf->highbd_predict[0][0][0] = aom_highbd_convolve8_vert; | |
| sf->highbd_predict[0][0][1] = aom_highbd_convolve8_avg_vert; | |
| sf->highbd_predict[0][1][0] = aom_highbd_convolve8_vert; | |
| sf->highbd_predict[0][1][1] = aom_highbd_convolve8_avg_vert; | |
| sf->highbd_predict[1][0][0] = aom_highbd_convolve8; | |
| sf->highbd_predict[1][0][1] = aom_highbd_convolve8_avg; | |
| } | |
| } else { | |
| if (sf->y_step_q4 == SCALE_SUBPEL_SHIFTS) { | |
| // No scaling in the y direction. Must always scale in the x direction. | |
| sf->highbd_predict[0][0][0] = aom_highbd_convolve8_horiz; | |
| sf->highbd_predict[0][0][1] = aom_highbd_convolve8_avg_horiz; | |
| sf->highbd_predict[0][1][0] = aom_highbd_convolve8; | |
| sf->highbd_predict[0][1][1] = aom_highbd_convolve8_avg; | |
| sf->highbd_predict[1][0][0] = aom_highbd_convolve8_horiz; | |
| sf->highbd_predict[1][0][1] = aom_highbd_convolve8_avg_horiz; | |
| } else { | |
| // Must always scale in both directions. | |
| sf->highbd_predict[0][0][0] = aom_highbd_convolve8; | |
| sf->highbd_predict[0][0][1] = aom_highbd_convolve8_avg; | |
| sf->highbd_predict[0][1][0] = aom_highbd_convolve8; | |
| sf->highbd_predict[0][1][1] = aom_highbd_convolve8_avg; | |
| sf->highbd_predict[1][0][0] = aom_highbd_convolve8; | |
| sf->highbd_predict[1][0][1] = aom_highbd_convolve8_avg; | |
| } | |
| } | |
| // 2D subpel motion always gets filtered in both directions. | |
| sf->highbd_predict[1][1][0] = aom_highbd_convolve8; | |
| sf->highbd_predict[1][1][1] = aom_highbd_convolve8_avg; | |
| } | |
| #endif // CONFIG_HIGHBITDEPTH | |
| } |