| /* |
| * Copyright (c) 2020, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 2 Clause License and |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License |
| * was not distributed with this source code in the LICENSE file, you can |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open |
| * Media Patent License 1.0 was not distributed with this source code in the |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. |
| */ |
| |
| #include <ostream> |
| #include <set> |
| #include <vector> |
| #include "config/av1_rtcd.h" |
| #include "config/aom_dsp_rtcd.h" |
| #include "test/acm_random.h" |
| #include "aom_ports/aom_timer.h" |
| #include "third_party/googletest/src/googletest/include/gtest/gtest.h" |
| |
| namespace { |
| |
| // TODO(any): Remove following INTERP_FILTERS_ALL define, so that 12-tap filter |
| // is tested once 12-tap filter SIMD is done. |
| #undef INTERP_FILTERS_ALL |
| #define INTERP_FILTERS_ALL 4 |
| |
| // All single reference convolve tests are parameterized on block size, |
| // bit-depth, and function to test. |
| // |
| // Note that parameterizing on these variables (and not other parameters) is |
| // a conscious decision - Jenkins needs some degree of parallelization to run |
| // the tests within the time limit, but if the number of parameters increases |
| // too much, the gtest framework does not handle it well (increased overhead per |
| // test, huge amount of output to stdout, etc.). |
| // |
| // Also note that the test suites must be named with the architecture, e.g., |
| // C, C_X, AVX2_X, ... The test suite that runs on Jenkins sometimes runs tests |
| // that cannot deal with intrinsics (e.g., the Valgrind tests on 32-bit x86 |
| // binaries) and will disable tests using a filter like |
| // --gtest_filter=-:SSE4_1.*. If the test suites are not named this way, the |
| // testing infrastructure will not selectively filter them properly. |
| class BlockSize { |
| public: |
| BlockSize(int w, int h) : width_(w), height_(h) {} |
| |
| int Width() const { return width_; } |
| int Height() const { return height_; } |
| |
| bool operator<(const BlockSize &other) const { |
| if (Width() == other.Width()) { |
| return Height() < other.Height(); |
| } |
| return Width() < other.Width(); |
| } |
| |
| bool operator==(const BlockSize &other) const { |
| return Width() == other.Width() && Height() == other.Height(); |
| } |
| |
| private: |
| int width_; |
| int height_; |
| }; |
| |
| // Block size / bit depth / test function used to parameterize the tests. |
| template <typename T> |
| class TestParam { |
| public: |
| TestParam(const BlockSize &block, int bd, T test_func) |
| : block_(block), bd_(bd), test_func_(test_func) {} |
| |
| const BlockSize &Block() const { return block_; } |
| int BitDepth() const { return bd_; } |
| T TestFunction() const { return test_func_; } |
| |
| bool operator==(const TestParam &other) const { |
| return Block() == other.Block() && BitDepth() == other.BitDepth() && |
| TestFunction() == other.TestFunction(); |
| } |
| |
| private: |
| BlockSize block_; |
| int bd_; |
| T test_func_; |
| }; |
| |
| template <typename T> |
| std::ostream &operator<<(std::ostream &os, const TestParam<T> &test_arg) { |
| return os << "TestParam { width:" << test_arg.Block().Width() |
| << " height:" << test_arg.Block().Height() |
| << " bd:" << test_arg.BitDepth() << " }"; |
| } |
| |
| // Generate the list of all block widths / heights that need to be tested, |
| // includes chroma and luma sizes, for the given bit-depths. The test |
| // function is the same for all generated parameters. |
| template <typename T> |
| std::vector<TestParam<T>> GetTestParams(std::initializer_list<int> bit_depths, |
| T test_func) { |
| std::set<BlockSize> sizes; |
| for (int b = BLOCK_4X4; b < BLOCK_SIZES_ALL; ++b) { |
| const int w = block_size_wide[b]; |
| const int h = block_size_high[b]; |
| sizes.insert(BlockSize(w, h)); |
| // Add in smaller chroma sizes as well. |
| if (w == 4 || h == 4) { |
| sizes.insert(BlockSize(w / 2, h / 2)); |
| } |
| } |
| std::vector<TestParam<T>> result; |
| for (const BlockSize &block : sizes) { |
| for (int bd : bit_depths) { |
| result.push_back(TestParam<T>(block, bd, test_func)); |
| } |
| } |
| return result; |
| } |
| |
| template <typename T> |
| std::vector<TestParam<T>> GetLowbdTestParams(T test_func) { |
| return GetTestParams({ 8 }, test_func); |
| } |
| |
| template <typename T> |
| ::testing::internal::ParamGenerator<TestParam<T>> BuildLowbdParams( |
| T test_func) { |
| return ::testing::ValuesIn(GetLowbdTestParams(test_func)); |
| } |
| |
| // Test the test-parameters generators work as expected. |
| class AV1ConvolveParametersTest : public ::testing::Test {}; |
| |
| TEST_F(AV1ConvolveParametersTest, GetLowbdTestParams) { |
| auto v = GetLowbdTestParams(av1_convolve_x_sr_c); |
| ASSERT_EQ(27U, v.size()); |
| for (const auto &p : v) { |
| ASSERT_EQ(8, p.BitDepth()); |
| // Needed (instead of ASSERT_EQ(...) since gtest does not |
| // have built in printing for arbitrary functions, which |
| // causes a compilation error. |
| bool same_fn = av1_convolve_x_sr_c == p.TestFunction(); |
| ASSERT_TRUE(same_fn); |
| } |
| } |
| |
| #if CONFIG_AV1_HIGHBITDEPTH |
| template <typename T> |
| std::vector<TestParam<T>> GetHighbdTestParams(T test_func) { |
| return GetTestParams({ 10, 12 }, test_func); |
| } |
| |
| template <typename T> |
| ::testing::internal::ParamGenerator<TestParam<T>> BuildHighbdParams( |
| T test_func) { |
| return ::testing::ValuesIn(GetHighbdTestParams(test_func)); |
| } |
| |
| TEST_F(AV1ConvolveParametersTest, GetHighbdTestParams) { |
| auto v = GetHighbdTestParams(av1_highbd_convolve_x_sr_c); |
| ASSERT_EQ(54U, v.size()); |
| int num_10 = 0; |
| int num_12 = 0; |
| for (const auto &p : v) { |
| ASSERT_TRUE(p.BitDepth() == 10 || p.BitDepth() == 12); |
| bool same_fn = av1_highbd_convolve_x_sr_c == p.TestFunction(); |
| ASSERT_TRUE(same_fn); |
| if (p.BitDepth() == 10) { |
| ++num_10; |
| } else { |
| ++num_12; |
| } |
| } |
| ASSERT_EQ(num_10, num_12); |
| } |
| #endif // CONFIG_AV1_HIGHBITDEPTH |
| |
| // AV1ConvolveTest is the base class that all convolve tests should derive from. |
| // It provides storage/methods for generating randomized buffers for both |
| // low bit-depth and high bit-depth, and setup/teardown methods for clearing |
| // system state. Implementors can get the bit-depth / block-size / |
| // test function by calling GetParam(). |
| template <typename T> |
| class AV1ConvolveTest : public ::testing::TestWithParam<TestParam<T>> { |
| public: |
| virtual ~AV1ConvolveTest() { TearDown(); } |
| |
| virtual void SetUp() override { |
| rnd_.Reset(libaom_test::ACMRandom::DeterministicSeed()); |
| } |
| |
| virtual void TearDown() override {} |
| |
| // Randomizes the 8-bit input buffer and returns a pointer to it. Note that |
| // the pointer is safe to use with an 8-tap filter. The stride can range |
| // from width to (width + kPadding). Also note that the pointer is to the |
| // same memory location. |
| static constexpr int kInputPadding = 12; |
| |
| // Get a pointer to a buffer with stride == width. Note that we must have |
| // the test param passed in explicitly -- the gtest framework does not |
| // support calling GetParam() within a templatized class. |
| // Note that FirstRandomInput8 always returns the same pointer -- if two |
| // inputs are needed, also use SecondRandomInput8. |
| const uint8_t *FirstRandomInput8(const TestParam<T> ¶m) { |
| // Note we can't call GetParam() directly -- gtest does not support |
| // this for parameterized types. |
| return RandomInput8(input8_1_, param); |
| } |
| |
| const uint8_t *SecondRandomInput8(const TestParam<T> ¶m) { |
| return RandomInput8(input8_2_, param); |
| } |
| |
| // Some of the intrinsics perform writes in 32 byte chunks. Moreover, some |
| // of the instrinsics assume that the stride is also a multiple of 32. |
| // To satisfy these constraints and also remain simple, output buffer strides |
| // are assumed MAX_SB_SIZE. |
| static constexpr int kOutputStride = MAX_SB_SIZE; |
| |
| // Check that two 8-bit output buffers are identical. |
| void AssertOutputBufferEq(const uint8_t *p1, const uint8_t *p2, int width, |
| int height) { |
| ASSERT_TRUE(p1 != p2) << "Buffers must be at different memory locations"; |
| for (int j = 0; j < height; ++j) { |
| if (memcmp(p1, p2, sizeof(*p1) * width) == 0) { |
| p1 += kOutputStride; |
| p2 += kOutputStride; |
| continue; |
| } |
| for (int i = 0; i < width; ++i) { |
| ASSERT_EQ(p1[i], p2[i]) |
| << width << "x" << height << " Pixel mismatch at (" << i << ", " |
| << j << ")"; |
| } |
| } |
| } |
| |
| // Check that two 16-bit output buffers are identical. |
| void AssertOutputBufferEq(const uint16_t *p1, const uint16_t *p2, int width, |
| int height) { |
| ASSERT_TRUE(p1 != p2) << "Buffers must be in different memory locations"; |
| for (int j = 0; j < height; ++j) { |
| if (memcmp(p1, p2, sizeof(*p1) * width) == 0) { |
| p1 += kOutputStride; |
| p2 += kOutputStride; |
| continue; |
| } |
| for (int i = 0; i < width; ++i) { |
| ASSERT_EQ(p1[i], p2[i]) |
| << width << "x" << height << " Pixel mismatch at (" << i << ", " |
| << j << ")"; |
| } |
| } |
| } |
| |
| #if CONFIG_AV1_HIGHBITDEPTH |
| // Note that the randomized values are capped by bit-depth. |
| const uint16_t *FirstRandomInput16(const TestParam<T> ¶m) { |
| return RandomInput16(input16_1_, param); |
| } |
| |
| const uint16_t *SecondRandomInput16(const TestParam<T> ¶m) { |
| return RandomInput16(input16_2_, param); |
| } |
| #endif |
| |
| private: |
| const uint8_t *RandomInput8(uint8_t *p, const TestParam<T> ¶m) { |
| EXPECT_EQ(8, param.BitDepth()); |
| EXPECT_GE(MAX_SB_SIZE, param.Block().Width()); |
| EXPECT_GE(MAX_SB_SIZE, param.Block().Height()); |
| const int padded_width = param.Block().Width() + kInputPadding; |
| const int padded_height = param.Block().Height() + kInputPadding; |
| Randomize(p, padded_width * padded_height); |
| return p + (kInputPadding / 2) * padded_width + kInputPadding / 2; |
| } |
| |
| void Randomize(uint8_t *p, int size) { |
| for (int i = 0; i < size; ++i) { |
| p[i] = rnd_.Rand8(); |
| } |
| } |
| |
| #if CONFIG_AV1_HIGHBITDEPTH |
| const uint16_t *RandomInput16(uint16_t *p, const TestParam<T> ¶m) { |
| // Check that this is only called with high bit-depths. |
| EXPECT_TRUE(param.BitDepth() == 10 || param.BitDepth() == 12); |
| EXPECT_GE(MAX_SB_SIZE, param.Block().Width()); |
| EXPECT_GE(MAX_SB_SIZE, param.Block().Height()); |
| const int padded_width = param.Block().Width() + kInputPadding; |
| const int padded_height = param.Block().Height() + kInputPadding; |
| Randomize(p, padded_width * padded_height, param.BitDepth()); |
| return p + (kInputPadding / 2) * padded_width + kInputPadding / 2; |
| } |
| |
| void Randomize(uint16_t *p, int size, int bit_depth) { |
| for (int i = 0; i < size; ++i) { |
| p[i] = rnd_.Rand16() & ((1 << bit_depth) - 1); |
| } |
| } |
| #endif |
| |
| static constexpr int kInputStride = MAX_SB_SIZE + kInputPadding; |
| |
| libaom_test::ACMRandom rnd_; |
| // Statically allocate all the memory that is needed for the tests. Note |
| // that we cannot allocate output memory here. It must use DECLARE_ALIGNED, |
| // which is a C99 feature and interacts badly with C++ member variables. |
| uint8_t input8_1_[kInputStride * kInputStride]; |
| uint8_t input8_2_[kInputStride * kInputStride]; |
| #if CONFIG_AV1_HIGHBITDEPTH |
| uint16_t input16_1_[kInputStride * kInputStride]; |
| uint16_t input16_2_[kInputStride * kInputStride]; |
| #endif |
| }; |
| |
| //////////////////////////////////////////////////////// |
| // Single reference convolve-x functions (low bit-depth) |
| //////////////////////////////////////////////////////// |
| typedef void (*convolve_x_func)(const uint8_t *src, int src_stride, |
| uint8_t *dst, int dst_stride, int w, int h, |
| const InterpFilterParams *filter_params_x, |
| const int subpel_x_qn, |
| ConvolveParams *conv_params); |
| |
| class AV1ConvolveXTest : public AV1ConvolveTest<convolve_x_func> { |
| public: |
| void RunTest() { |
| for (int sub_x = 0; sub_x < 16; ++sub_x) { |
| for (int filter = EIGHTTAP_REGULAR; filter <= INTERP_FILTERS_ALL; |
| ++filter) { |
| InterpFilter f = static_cast<InterpFilter>(filter); |
| TestConvolve(sub_x, f); |
| } |
| } |
| } |
| |
| public: |
| void SpeedTest() { |
| for (int filter = EIGHTTAP_REGULAR; filter <= INTERP_FILTERS_ALL; |
| ++filter) { |
| InterpFilter f = static_cast<InterpFilter>(filter); |
| TestConvolveSpeed(f, 10000); |
| } |
| } |
| |
| private: |
| void TestConvolve(const int sub_x, const InterpFilter filter) { |
| const int width = GetParam().Block().Width(); |
| const int height = GetParam().Block().Height(); |
| |
| const InterpFilterParams *filter_params_x = |
| av1_get_interp_filter_params_with_block_size(filter, width); |
| ConvolveParams conv_params1 = get_conv_params_no_round(0, 0, NULL, 0, 0, 8); |
| const uint8_t *input = FirstRandomInput8(GetParam()); |
| DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); |
| av1_convolve_x_sr_c(input, width, reference, kOutputStride, width, height, |
| filter_params_x, sub_x, &conv_params1); |
| |
| ConvolveParams conv_params2 = get_conv_params_no_round(0, 0, NULL, 0, 0, 8); |
| convolve_x_func test_func = GetParam().TestFunction(); |
| DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); |
| test_func(input, width, test, kOutputStride, width, height, filter_params_x, |
| sub_x, &conv_params2); |
| AssertOutputBufferEq(reference, test, width, height); |
| } |
| |
| private: |
| void TestConvolveSpeed(const InterpFilter filter, const int num_iters) { |
| const int width = GetParam().Block().Width(); |
| const int height = GetParam().Block().Height(); |
| |
| const InterpFilterParams *filter_params_x = |
| av1_get_interp_filter_params_with_block_size(filter, width); |
| ConvolveParams conv_params1 = get_conv_params_no_round(0, 0, NULL, 0, 0, 8); |
| const uint8_t *input = FirstRandomInput8(GetParam()); |
| DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); |
| |
| aom_usec_timer timer; |
| aom_usec_timer_start(&timer); |
| for (int i = 0; i < num_iters; ++i) { |
| av1_convolve_x_sr_c(input, width, reference, kOutputStride, width, height, |
| filter_params_x, 0, &conv_params1); |
| } |
| aom_usec_timer_mark(&timer); |
| const double time1 = static_cast<double>(aom_usec_timer_elapsed(&timer)); |
| ConvolveParams conv_params2 = get_conv_params_no_round(0, 0, NULL, 0, 0, 8); |
| convolve_x_func test_func = GetParam().TestFunction(); |
| DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); |
| |
| aom_usec_timer_start(&timer); |
| for (int i = 0; i < num_iters; ++i) { |
| test_func(input, width, test, kOutputStride, width, height, |
| filter_params_x, 0, &conv_params2); |
| } |
| aom_usec_timer_mark(&timer); |
| const double time2 = static_cast<double>(aom_usec_timer_elapsed(&timer)); |
| printf("%d %3dx%-3d:%7.2f/%7.2fns (%3.2f)\n", filter, width, height, time1, |
| time2, time1 / time2); |
| } |
| }; |
| |
| TEST_P(AV1ConvolveXTest, RunTest) { RunTest(); } |
| |
| TEST_P(AV1ConvolveXTest, DISABLED_SpeedTest) { SpeedTest(); } |
| |
| INSTANTIATE_TEST_SUITE_P(C, AV1ConvolveXTest, |
| BuildLowbdParams(av1_convolve_x_sr_c)); |
| |
| #if HAVE_SSE2 |
| INSTANTIATE_TEST_SUITE_P(SSE2, AV1ConvolveXTest, |
| BuildLowbdParams(av1_convolve_x_sr_sse2)); |
| #endif |
| |
| #if HAVE_AVX2 |
| INSTANTIATE_TEST_SUITE_P(AVX2, AV1ConvolveXTest, |
| BuildLowbdParams(av1_convolve_x_sr_avx2)); |
| #endif |
| |
| #if HAVE_NEON |
| INSTANTIATE_TEST_SUITE_P(NEON, AV1ConvolveXTest, |
| BuildLowbdParams(av1_convolve_x_sr_neon)); |
| #endif |
| |
| #if CONFIG_AV1_HIGHBITDEPTH |
| ///////////////////////////////////////////////////////// |
| // Single reference convolve-x functions (high bit-depth) |
| ///////////////////////////////////////////////////////// |
| typedef void (*highbd_convolve_x_func)( |
| const uint16_t *src, int src_stride, uint16_t *dst, int dst_stride, int w, |
| int h, const InterpFilterParams *filter_params_x, const int subpel_x_qn, |
| ConvolveParams *conv_params, int bd); |
| |
| class AV1ConvolveXHighbdTest : public AV1ConvolveTest<highbd_convolve_x_func> { |
| public: |
| void RunTest() { |
| for (int sub_x = 0; sub_x < 16; ++sub_x) { |
| for (int filter = EIGHTTAP_REGULAR; filter <= INTERP_FILTERS_ALL; |
| ++filter) { |
| InterpFilter f = static_cast<InterpFilter>(filter); |
| TestConvolve(sub_x, f); |
| } |
| } |
| } |
| |
| public: |
| void SpeedTest() { |
| for (int filter = EIGHTTAP_REGULAR; filter <= INTERP_FILTERS_ALL; |
| ++filter) { |
| InterpFilter f = static_cast<InterpFilter>(filter); |
| TestConvolveSpeed(f, 10000); |
| } |
| } |
| |
| private: |
| void TestConvolve(const int sub_x, const InterpFilter filter) { |
| const int width = GetParam().Block().Width(); |
| const int height = GetParam().Block().Height(); |
| const int bit_depth = GetParam().BitDepth(); |
| const InterpFilterParams *filter_params_x = |
| av1_get_interp_filter_params_with_block_size(filter, width); |
| ConvolveParams conv_params1 = |
| get_conv_params_no_round(0, 0, NULL, 0, 0, bit_depth); |
| const uint16_t *input = FirstRandomInput16(GetParam()); |
| DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); |
| av1_highbd_convolve_x_sr(input, width, reference, kOutputStride, width, |
| height, filter_params_x, sub_x, &conv_params1, |
| bit_depth); |
| |
| ConvolveParams conv_params2 = |
| get_conv_params_no_round(0, 0, NULL, 0, 0, bit_depth); |
| DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); |
| GetParam().TestFunction()(input, width, test, kOutputStride, width, height, |
| filter_params_x, sub_x, &conv_params2, bit_depth); |
| AssertOutputBufferEq(reference, test, width, height); |
| } |
| |
| private: |
| void TestConvolveSpeed(const InterpFilter filter, const int num_iters) { |
| const int width = GetParam().Block().Width(); |
| const int height = GetParam().Block().Height(); |
| const int bit_depth = GetParam().BitDepth(); |
| const InterpFilterParams *filter_params_x = |
| av1_get_interp_filter_params_with_block_size(filter, width); |
| ConvolveParams conv_params1 = get_conv_params_no_round(0, 0, NULL, 0, 0, 8); |
| const uint16_t *input = FirstRandomInput16(GetParam()); |
| DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); |
| |
| aom_usec_timer timer; |
| aom_usec_timer_start(&timer); |
| for (int i = 0; i < num_iters; ++i) { |
| av1_highbd_convolve_x_sr_c(input, width, reference, kOutputStride, width, |
| height, filter_params_x, 0, &conv_params1, |
| bit_depth); |
| } |
| aom_usec_timer_mark(&timer); |
| const double time1 = static_cast<double>(aom_usec_timer_elapsed(&timer)); |
| ConvolveParams conv_params2 = get_conv_params_no_round(0, 0, NULL, 0, 0, 8); |
| highbd_convolve_x_func test_func = GetParam().TestFunction(); |
| DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); |
| |
| aom_usec_timer_start(&timer); |
| for (int i = 0; i < num_iters; ++i) { |
| test_func(input, width, test, kOutputStride, width, height, |
| filter_params_x, 0, &conv_params2, bit_depth); |
| } |
| aom_usec_timer_mark(&timer); |
| const double time2 = static_cast<double>(aom_usec_timer_elapsed(&timer)); |
| printf("%d %3dx%-3d:%7.2f/%7.2fns (%3.2f)\n", filter, width, height, time1, |
| time2, time1 / time2); |
| } |
| }; |
| |
| TEST_P(AV1ConvolveXHighbdTest, RunTest) { RunTest(); } |
| |
| TEST_P(AV1ConvolveXHighbdTest, DISABLED_SpeedTest) { SpeedTest(); } |
| |
| INSTANTIATE_TEST_SUITE_P(C, AV1ConvolveXHighbdTest, |
| BuildHighbdParams(av1_highbd_convolve_x_sr_c)); |
| |
| #if HAVE_SSSE3 |
| INSTANTIATE_TEST_SUITE_P(SSSE3, AV1ConvolveXHighbdTest, |
| BuildHighbdParams(av1_highbd_convolve_x_sr_ssse3)); |
| #endif |
| |
| #if HAVE_AVX2 |
| INSTANTIATE_TEST_SUITE_P(AVX2, AV1ConvolveXHighbdTest, |
| BuildHighbdParams(av1_highbd_convolve_x_sr_avx2)); |
| #endif |
| |
| #endif // CONFIG_AV1_HIGHBITDEPTH |
| |
| //////////////////////////////////////////////////////// |
| // Single reference convolve-y functions (low bit-depth) |
| //////////////////////////////////////////////////////// |
| typedef void (*convolve_y_func)(const uint8_t *src, int src_stride, |
| uint8_t *dst, int dst_stride, int w, int h, |
| const InterpFilterParams *filter_params_y, |
| const int subpel_y_qn); |
| |
| class AV1ConvolveYTest : public AV1ConvolveTest<convolve_y_func> { |
| public: |
| void RunTest() { |
| for (int sub_y = 0; sub_y < 16; ++sub_y) { |
| for (int filter = EIGHTTAP_REGULAR; filter <= INTERP_FILTERS_ALL; |
| ++filter) { |
| InterpFilter f = static_cast<InterpFilter>(filter); |
| TestConvolve(sub_y, f); |
| } |
| } |
| } |
| |
| public: |
| void SpeedTest() { |
| for (int filter = EIGHTTAP_REGULAR; filter <= INTERP_FILTERS_ALL; |
| ++filter) { |
| InterpFilter f = static_cast<InterpFilter>(filter); |
| TestConvolveSpeed(f, 10000); |
| } |
| } |
| |
| private: |
| void TestConvolve(const int sub_y, const InterpFilter filter) { |
| const int width = GetParam().Block().Width(); |
| const int height = GetParam().Block().Height(); |
| |
| const InterpFilterParams *filter_params_y = |
| av1_get_interp_filter_params_with_block_size(filter, height); |
| const uint8_t *input = FirstRandomInput8(GetParam()); |
| DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); |
| av1_convolve_y_sr_c(input, width, reference, kOutputStride, width, height, |
| filter_params_y, sub_y); |
| DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); |
| GetParam().TestFunction()(input, width, test, kOutputStride, width, height, |
| filter_params_y, sub_y); |
| AssertOutputBufferEq(reference, test, width, height); |
| } |
| |
| private: |
| void TestConvolveSpeed(const InterpFilter filter, const int num_iters) { |
| const int width = GetParam().Block().Width(); |
| const int height = GetParam().Block().Height(); |
| |
| const InterpFilterParams *filter_params_y = |
| av1_get_interp_filter_params_with_block_size(filter, height); |
| const uint8_t *input = FirstRandomInput8(GetParam()); |
| DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); |
| |
| aom_usec_timer timer; |
| aom_usec_timer_start(&timer); |
| for (int i = 0; i < num_iters; ++i) { |
| av1_convolve_y_sr_c(input, width, reference, kOutputStride, width, height, |
| filter_params_y, 0); |
| } |
| aom_usec_timer_mark(&timer); |
| const double time1 = static_cast<double>(aom_usec_timer_elapsed(&timer)); |
| |
| DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); |
| |
| aom_usec_timer_start(&timer); |
| for (int i = 0; i < num_iters; ++i) { |
| GetParam().TestFunction()(input, width, test, kOutputStride, width, |
| height, filter_params_y, 0); |
| } |
| aom_usec_timer_mark(&timer); |
| const double time2 = static_cast<double>(aom_usec_timer_elapsed(&timer)); |
| printf("%d %3dx%-3d:%7.2f/%7.2fns (%3.2f)\n", filter, width, height, time1, |
| time2, time1 / time2); |
| } |
| }; |
| |
| TEST_P(AV1ConvolveYTest, RunTest) { RunTest(); } |
| |
| TEST_P(AV1ConvolveYTest, DISABLED_SpeedTest) { SpeedTest(); } |
| |
| INSTANTIATE_TEST_SUITE_P(C, AV1ConvolveYTest, |
| BuildLowbdParams(av1_convolve_y_sr_c)); |
| |
| #if HAVE_SSE2 |
| INSTANTIATE_TEST_SUITE_P(SSE2, AV1ConvolveYTest, |
| BuildLowbdParams(av1_convolve_y_sr_sse2)); |
| #endif |
| |
| #if HAVE_AVX2 |
| INSTANTIATE_TEST_SUITE_P(AVX2, AV1ConvolveYTest, |
| BuildLowbdParams(av1_convolve_y_sr_avx2)); |
| #endif |
| |
| #if HAVE_NEON |
| INSTANTIATE_TEST_SUITE_P(NEON, AV1ConvolveYTest, |
| BuildLowbdParams(av1_convolve_y_sr_neon)); |
| #endif |
| |
| #if CONFIG_AV1_HIGHBITDEPTH |
| ///////////////////////////////////////////////////////// |
| // Single reference convolve-y functions (high bit-depth) |
| ///////////////////////////////////////////////////////// |
| typedef void (*highbd_convolve_y_func)( |
| const uint16_t *src, int src_stride, uint16_t *dst, int dst_stride, int w, |
| int h, const InterpFilterParams *filter_params_y, const int subpel_y_qn, |
| int bd); |
| |
| class AV1ConvolveYHighbdTest : public AV1ConvolveTest<highbd_convolve_y_func> { |
| public: |
| void RunTest() { |
| for (int sub_y = 0; sub_y < 16; ++sub_y) { |
| for (int filter = EIGHTTAP_REGULAR; filter <= INTERP_FILTERS_ALL; |
| ++filter) { |
| InterpFilter f = static_cast<InterpFilter>(filter); |
| TestConvolve(sub_y, f); |
| } |
| } |
| } |
| |
| public: |
| void SpeedTest() { |
| for (int filter = EIGHTTAP_REGULAR; filter <= INTERP_FILTERS_ALL; |
| ++filter) { |
| InterpFilter f = static_cast<InterpFilter>(filter); |
| TestConvolveSpeed(f, 10000); |
| } |
| } |
| |
| private: |
| void TestConvolve(const int sub_y, const InterpFilter filter) { |
| const int width = GetParam().Block().Width(); |
| const int height = GetParam().Block().Height(); |
| const int bit_depth = GetParam().BitDepth(); |
| const InterpFilterParams *filter_params_y = |
| av1_get_interp_filter_params_with_block_size(filter, height); |
| const uint16_t *input = FirstRandomInput16(GetParam()); |
| DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); |
| av1_highbd_convolve_y_sr(input, width, reference, kOutputStride, width, |
| height, filter_params_y, sub_y, bit_depth); |
| DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); |
| GetParam().TestFunction()(input, width, test, kOutputStride, width, height, |
| filter_params_y, sub_y, bit_depth); |
| AssertOutputBufferEq(reference, test, width, height); |
| } |
| |
| private: |
| void TestConvolveSpeed(const InterpFilter filter, const int num_iters) { |
| const int width = GetParam().Block().Width(); |
| const int height = GetParam().Block().Height(); |
| const int bit_depth = GetParam().BitDepth(); |
| const InterpFilterParams *filter_params_y = |
| av1_get_interp_filter_params_with_block_size(filter, width); |
| const uint16_t *input = FirstRandomInput16(GetParam()); |
| DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); |
| |
| aom_usec_timer timer; |
| aom_usec_timer_start(&timer); |
| for (int i = 0; i < num_iters; ++i) { |
| av1_highbd_convolve_y_sr_c(input, width, reference, kOutputStride, width, |
| height, filter_params_y, 0, bit_depth); |
| } |
| aom_usec_timer_mark(&timer); |
| const double time1 = static_cast<double>(aom_usec_timer_elapsed(&timer)); |
| highbd_convolve_y_func test_func = GetParam().TestFunction(); |
| DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); |
| |
| aom_usec_timer_start(&timer); |
| for (int i = 0; i < num_iters; ++i) { |
| test_func(input, width, test, kOutputStride, width, height, |
| filter_params_y, 0, bit_depth); |
| } |
| aom_usec_timer_mark(&timer); |
| const double time2 = static_cast<double>(aom_usec_timer_elapsed(&timer)); |
| printf("%d %3dx%-3d:%7.2f/%7.2fns (%3.2f)\n", filter, width, height, time1, |
| time2, time1 / time2); |
| } |
| }; |
| |
| TEST_P(AV1ConvolveYHighbdTest, RunTest) { RunTest(); } |
| |
| TEST_P(AV1ConvolveYHighbdTest, DISABLED_SpeedTest) { SpeedTest(); } |
| |
| INSTANTIATE_TEST_SUITE_P(C, AV1ConvolveYHighbdTest, |
| BuildHighbdParams(av1_highbd_convolve_y_sr_c)); |
| |
| #if HAVE_SSSE3 |
| INSTANTIATE_TEST_SUITE_P(SSSE3, AV1ConvolveYHighbdTest, |
| BuildHighbdParams(av1_highbd_convolve_y_sr_ssse3)); |
| #endif |
| |
| #if HAVE_AVX2 |
| INSTANTIATE_TEST_SUITE_P(AVX2, AV1ConvolveYHighbdTest, |
| BuildHighbdParams(av1_highbd_convolve_y_sr_avx2)); |
| #endif |
| |
| #endif // CONFIG_AV1_HIGHBITDEPTH |
| |
| ////////////////////////////////////////////////////////////// |
| // Single reference convolve-copy functions (low bit-depth) |
| ////////////////////////////////////////////////////////////// |
| typedef void (*convolve_copy_func)(const uint8_t *src, ptrdiff_t src_stride, |
| uint8_t *dst, ptrdiff_t dst_stride, int w, |
| int h); |
| |
| class AV1ConvolveCopyTest : public AV1ConvolveTest<convolve_copy_func> { |
| public: |
| void RunTest() { |
| const int width = GetParam().Block().Width(); |
| const int height = GetParam().Block().Height(); |
| const uint8_t *input = FirstRandomInput8(GetParam()); |
| DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); |
| aom_convolve_copy(input, width, reference, kOutputStride, width, height); |
| DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); |
| GetParam().TestFunction()(input, width, test, kOutputStride, width, height); |
| AssertOutputBufferEq(reference, test, width, height); |
| } |
| }; |
| |
| // Note that even though these are AOM convolve functions, we are using the |
| // newer AV1 test framework. |
| TEST_P(AV1ConvolveCopyTest, RunTest) { RunTest(); } |
| |
| INSTANTIATE_TEST_SUITE_P(C, AV1ConvolveCopyTest, |
| BuildLowbdParams(aom_convolve_copy_c)); |
| |
| #if HAVE_SSE2 |
| INSTANTIATE_TEST_SUITE_P(SSE2, AV1ConvolveCopyTest, |
| BuildLowbdParams(aom_convolve_copy_sse2)); |
| #endif |
| |
| #if HAVE_AVX2 |
| INSTANTIATE_TEST_SUITE_P(AVX2, AV1ConvolveCopyTest, |
| BuildLowbdParams(aom_convolve_copy_avx2)); |
| #endif |
| |
| #if HAVE_NEON |
| INSTANTIATE_TEST_SUITE_P(NEON, AV1ConvolveCopyTest, |
| BuildLowbdParams(aom_convolve_copy_neon)); |
| #endif |
| |
| #if HAVE_MSA |
| INSTANTIATE_TEST_SUITE_P(MSA, AV1ConvolveCopyTest, |
| BuildLowbdParams(aom_convolve_copy_msa)); |
| #endif |
| |
| #if HAVE_DSPR2 |
| INSTANTIATE_TEST_SUITE_P(DSPR2, AV1ConvolveCopyTest, |
| BuildLowbdParams(aom_convolve_copy_dspr2)); |
| #endif |
| |
| #if CONFIG_AV1_HIGHBITDEPTH |
| /////////////////////////////////////////////////////////////// |
| // Single reference convolve-copy functions (high bit-depth) |
| /////////////////////////////////////////////////////////////// |
| typedef void (*highbd_convolve_copy_func)(const uint16_t *src, |
| ptrdiff_t src_stride, uint16_t *dst, |
| ptrdiff_t dst_stride, int w, int h); |
| |
| class AV1ConvolveCopyHighbdTest |
| : public AV1ConvolveTest<highbd_convolve_copy_func> { |
| public: |
| void RunTest() { |
| const BlockSize &block = GetParam().Block(); |
| const int width = block.Width(); |
| const int height = block.Height(); |
| const uint16_t *input = FirstRandomInput16(GetParam()); |
| DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); |
| aom_highbd_convolve_copy(input, width, reference, kOutputStride, width, |
| height); |
| DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); |
| GetParam().TestFunction()(input, width, test, kOutputStride, width, height); |
| AssertOutputBufferEq(reference, test, width, height); |
| } |
| }; |
| |
| TEST_P(AV1ConvolveCopyHighbdTest, RunTest) { RunTest(); } |
| |
| INSTANTIATE_TEST_SUITE_P(C, AV1ConvolveCopyHighbdTest, |
| BuildHighbdParams(aom_highbd_convolve_copy_c)); |
| |
| #if HAVE_SSE2 |
| INSTANTIATE_TEST_SUITE_P(SSE2, AV1ConvolveCopyHighbdTest, |
| BuildHighbdParams(aom_highbd_convolve_copy_sse2)); |
| #endif |
| |
| #if HAVE_AVX2 |
| INSTANTIATE_TEST_SUITE_P(AVX2, AV1ConvolveCopyHighbdTest, |
| BuildHighbdParams(aom_highbd_convolve_copy_avx2)); |
| #endif |
| |
| #endif // CONFIG_AV1_HIGHBITDEPTH |
| |
| ///////////////////////////////////////////////////////// |
| // Single reference convolve-2D functions (low bit-depth) |
| ///////////////////////////////////////////////////////// |
| typedef void (*convolve_2d_func)(const uint8_t *src, int src_stride, |
| uint8_t *dst, int dst_stride, int w, int h, |
| const InterpFilterParams *filter_params_x, |
| const InterpFilterParams *filter_params_y, |
| const int subpel_x_qn, const int subpel_y_qn, |
| ConvolveParams *conv_params); |
| |
| class AV1Convolve2DTest : public AV1ConvolveTest<convolve_2d_func> { |
| public: |
| void RunTest() { |
| for (int sub_x = 0; sub_x < 16; ++sub_x) { |
| for (int sub_y = 0; sub_y < 16; ++sub_y) { |
| for (int h_f = EIGHTTAP_REGULAR; h_f <= INTERP_FILTERS_ALL; ++h_f) { |
| for (int v_f = EIGHTTAP_REGULAR; v_f <= INTERP_FILTERS_ALL; ++v_f) { |
| if (((h_f == MULTITAP_SHARP2) && (v_f < MULTITAP_SHARP2)) || |
| ((h_f < MULTITAP_SHARP2) && (v_f == MULTITAP_SHARP2))) |
| continue; |
| TestConvolve(static_cast<InterpFilter>(h_f), |
| static_cast<InterpFilter>(v_f), sub_x, sub_y); |
| } |
| } |
| } |
| } |
| } |
| |
| public: |
| void SpeedTest() { |
| for (int h_f = EIGHTTAP_REGULAR; h_f <= INTERP_FILTERS_ALL; ++h_f) { |
| for (int v_f = EIGHTTAP_REGULAR; v_f <= INTERP_FILTERS_ALL; ++v_f) { |
| if (((h_f == MULTITAP_SHARP2) && (v_f < MULTITAP_SHARP2)) || |
| ((h_f < MULTITAP_SHARP2) && (v_f == MULTITAP_SHARP2))) |
| continue; |
| TestConvolveSpeed(static_cast<InterpFilter>(h_f), |
| static_cast<InterpFilter>(v_f), 10000); |
| } |
| } |
| } |
| |
| private: |
| void TestConvolve(const InterpFilter h_f, const InterpFilter v_f, |
| const int sub_x, const int sub_y) { |
| const int width = GetParam().Block().Width(); |
| const int height = GetParam().Block().Height(); |
| const InterpFilterParams *filter_params_x = |
| av1_get_interp_filter_params_with_block_size(h_f, width); |
| const InterpFilterParams *filter_params_y = |
| av1_get_interp_filter_params_with_block_size(v_f, height); |
| const uint8_t *input = FirstRandomInput8(GetParam()); |
| DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); |
| ConvolveParams conv_params1 = get_conv_params_no_round(0, 0, NULL, 0, 0, 8); |
| av1_convolve_2d_sr_c(input, width, reference, kOutputStride, width, height, |
| filter_params_x, filter_params_y, sub_x, sub_y, |
| &conv_params1); |
| DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); |
| ConvolveParams conv_params2 = get_conv_params_no_round(0, 0, NULL, 0, 0, 8); |
| GetParam().TestFunction()(input, width, test, kOutputStride, width, height, |
| filter_params_x, filter_params_y, sub_x, sub_y, |
| &conv_params2); |
| AssertOutputBufferEq(reference, test, width, height); |
| } |
| |
| private: |
| void TestConvolveSpeed(const InterpFilter h_f, const InterpFilter v_f, |
| int num_iters) { |
| const int width = GetParam().Block().Width(); |
| const int height = GetParam().Block().Height(); |
| const InterpFilterParams *filter_params_x = |
| av1_get_interp_filter_params_with_block_size(h_f, width); |
| const InterpFilterParams *filter_params_y = |
| av1_get_interp_filter_params_with_block_size(v_f, height); |
| const uint8_t *input = FirstRandomInput8(GetParam()); |
| DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); |
| ConvolveParams conv_params1 = get_conv_params_no_round(0, 0, NULL, 0, 0, 8); |
| aom_usec_timer timer; |
| aom_usec_timer_start(&timer); |
| for (int i = 0; i < num_iters; ++i) { |
| av1_convolve_2d_sr_c(input, width, reference, kOutputStride, width, |
| height, filter_params_x, filter_params_y, 0, 0, |
| &conv_params1); |
| } |
| aom_usec_timer_mark(&timer); |
| const double time1 = static_cast<double>(aom_usec_timer_elapsed(&timer)); |
| DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); |
| ConvolveParams conv_params2 = get_conv_params_no_round(0, 0, NULL, 0, 0, 8); |
| aom_usec_timer_start(&timer); |
| for (int i = 0; i < num_iters; ++i) { |
| GetParam().TestFunction()(input, width, test, kOutputStride, width, |
| height, filter_params_x, filter_params_y, 0, 0, |
| &conv_params2); |
| } |
| aom_usec_timer_mark(&timer); |
| const double time2 = static_cast<double>(aom_usec_timer_elapsed(&timer)); |
| printf("%d - %d %3dx%-3d:%7.2f/%7.2fns (%3.2f)\n", h_f, v_f, width, height, |
| time1, time2, time1 / time2); |
| } |
| }; |
| |
| TEST_P(AV1Convolve2DTest, RunTest) { RunTest(); } |
| |
| TEST_P(AV1Convolve2DTest, DISABLED_SpeedTest) { SpeedTest(); } |
| |
| INSTANTIATE_TEST_SUITE_P(C, AV1Convolve2DTest, |
| BuildLowbdParams(av1_convolve_2d_sr_c)); |
| |
| #if HAVE_SSE2 |
| INSTANTIATE_TEST_SUITE_P(SSE2, AV1Convolve2DTest, |
| BuildLowbdParams(av1_convolve_2d_sr_sse2)); |
| #endif |
| |
| #if HAVE_AVX2 |
| INSTANTIATE_TEST_SUITE_P(AVX2, AV1Convolve2DTest, |
| BuildLowbdParams(av1_convolve_2d_sr_avx2)); |
| #endif |
| |
| #if HAVE_NEON |
| INSTANTIATE_TEST_SUITE_P(NEON, AV1Convolve2DTest, |
| BuildLowbdParams(av1_convolve_2d_sr_neon)); |
| #endif |
| |
| #if CONFIG_AV1_HIGHBITDEPTH |
| ////////////////////////////////////////////////////////// |
| // Single reference convolve-2d functions (high bit-depth) |
| ////////////////////////////////////////////////////////// |
| |
| typedef void (*highbd_convolve_2d_func)( |
| const uint16_t *src, int src_stride, uint16_t *dst, int dst_stride, int w, |
| int h, const InterpFilterParams *filter_params_x, |
| const InterpFilterParams *filter_params_y, const int subpel_x_qn, |
| const int subpel_y_qn, ConvolveParams *conv_params, int bd); |
| |
| class AV1Convolve2DHighbdTest |
| : public AV1ConvolveTest<highbd_convolve_2d_func> { |
| public: |
| void RunTest() { |
| for (int sub_x = 0; sub_x < 16; ++sub_x) { |
| for (int sub_y = 0; sub_y < 16; ++sub_y) { |
| for (int h_f = EIGHTTAP_REGULAR; h_f <= INTERP_FILTERS_ALL; ++h_f) { |
| for (int v_f = EIGHTTAP_REGULAR; v_f <= INTERP_FILTERS_ALL; ++v_f) { |
| if (((h_f == MULTITAP_SHARP2) && (v_f < MULTITAP_SHARP2)) || |
| ((h_f < MULTITAP_SHARP2) && (v_f == MULTITAP_SHARP2))) |
| continue; |
| TestConvolve(static_cast<InterpFilter>(h_f), |
| static_cast<InterpFilter>(v_f), sub_x, sub_y); |
| } |
| } |
| } |
| } |
| } |
| |
| public: |
| void SpeedTest() { |
| for (int h_f = EIGHTTAP_REGULAR; h_f <= INTERP_FILTERS_ALL; ++h_f) { |
| for (int v_f = EIGHTTAP_REGULAR; v_f <= INTERP_FILTERS_ALL; ++v_f) { |
| if (((h_f == MULTITAP_SHARP2) && (v_f < MULTITAP_SHARP2)) || |
| ((h_f < MULTITAP_SHARP2) && (v_f == MULTITAP_SHARP2))) |
| continue; |
| TestConvolveSpeed(static_cast<InterpFilter>(h_f), |
| static_cast<InterpFilter>(v_f), 10000); |
| } |
| } |
| } |
| |
| private: |
| void TestConvolve(const InterpFilter h_f, const InterpFilter v_f, |
| const int sub_x, const int sub_y) { |
| const int width = GetParam().Block().Width(); |
| const int height = GetParam().Block().Height(); |
| const int bit_depth = GetParam().BitDepth(); |
| const InterpFilterParams *filter_params_x = |
| av1_get_interp_filter_params_with_block_size(h_f, width); |
| const InterpFilterParams *filter_params_y = |
| av1_get_interp_filter_params_with_block_size(v_f, height); |
| const uint16_t *input = FirstRandomInput16(GetParam()); |
| DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); |
| ConvolveParams conv_params1 = |
| get_conv_params_no_round(0, 0, NULL, 0, 0, bit_depth); |
| av1_highbd_convolve_2d_sr(input, width, reference, kOutputStride, width, |
| height, filter_params_x, filter_params_y, sub_x, |
| sub_y, &conv_params1, bit_depth); |
| DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); |
| ConvolveParams conv_params2 = |
| get_conv_params_no_round(0, 0, NULL, 0, 0, bit_depth); |
| GetParam().TestFunction()(input, width, test, kOutputStride, width, height, |
| filter_params_x, filter_params_y, sub_x, sub_y, |
| &conv_params2, bit_depth); |
| AssertOutputBufferEq(reference, test, width, height); |
| } |
| |
| void TestConvolveSpeed(const InterpFilter h_f, const InterpFilter v_f, |
| int num_iters) { |
| const int width = GetParam().Block().Width(); |
| const int height = GetParam().Block().Height(); |
| const int bit_depth = GetParam().BitDepth(); |
| const InterpFilterParams *filter_params_x = |
| av1_get_interp_filter_params_with_block_size(h_f, width); |
| const InterpFilterParams *filter_params_y = |
| av1_get_interp_filter_params_with_block_size(v_f, height); |
| const uint16_t *input = FirstRandomInput16(GetParam()); |
| DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); |
| ConvolveParams conv_params1 = get_conv_params_no_round(0, 0, NULL, 0, 0, 8); |
| aom_usec_timer timer; |
| aom_usec_timer_start(&timer); |
| for (int i = 0; i < num_iters; ++i) { |
| av1_highbd_convolve_2d_sr_c(input, width, reference, kOutputStride, width, |
| height, filter_params_x, filter_params_y, 0, |
| 0, &conv_params1, bit_depth); |
| } |
| aom_usec_timer_mark(&timer); |
| const double time1 = static_cast<double>(aom_usec_timer_elapsed(&timer)); |
| DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); |
| ConvolveParams conv_params2 = get_conv_params_no_round(0, 0, NULL, 0, 0, 8); |
| aom_usec_timer_start(&timer); |
| for (int i = 0; i < num_iters; ++i) { |
| GetParam().TestFunction()(input, width, test, kOutputStride, width, |
| height, filter_params_x, filter_params_y, 0, 0, |
| &conv_params2, bit_depth); |
| } |
| aom_usec_timer_mark(&timer); |
| const double time2 = static_cast<double>(aom_usec_timer_elapsed(&timer)); |
| printf("%d - %d %3dx%-3d:%7.2f/%7.2fns (%3.2f)\n", h_f, v_f, width, height, |
| time1, time2, time1 / time2); |
| } |
| }; |
| |
| TEST_P(AV1Convolve2DHighbdTest, RunTest) { RunTest(); } |
| |
| TEST_P(AV1Convolve2DHighbdTest, DISABLED_SpeedTest) { SpeedTest(); } |
| |
| INSTANTIATE_TEST_SUITE_P(C, AV1Convolve2DHighbdTest, |
| BuildHighbdParams(av1_highbd_convolve_2d_sr_c)); |
| |
| #if HAVE_SSSE3 |
| INSTANTIATE_TEST_SUITE_P(SSSE3, AV1Convolve2DHighbdTest, |
| BuildHighbdParams(av1_highbd_convolve_2d_sr_ssse3)); |
| #endif |
| |
| #if HAVE_AVX2 |
| INSTANTIATE_TEST_SUITE_P(AVX2, AV1Convolve2DHighbdTest, |
| BuildHighbdParams(av1_highbd_convolve_2d_sr_avx2)); |
| #endif |
| |
| #endif // CONFIG_AV1_HIGHBITDEPTH |
| |
| ////////////////////////// |
| // Compound Convolve Tests |
| ////////////////////////// |
| |
| // The compound functions do not work for chroma block sizes. Provide |
| // a function to generate test parameters for just luma block sizes. |
| template <typename T> |
| std::vector<TestParam<T>> GetLumaTestParams( |
| std::initializer_list<int> bit_depths, T test_func) { |
| std::set<BlockSize> sizes; |
| for (int b = BLOCK_4X4; b < BLOCK_SIZES_ALL; ++b) { |
| const int w = block_size_wide[b]; |
| const int h = block_size_high[b]; |
| sizes.insert(BlockSize(w, h)); |
| } |
| std::vector<TestParam<T>> result; |
| for (int bit_depth : bit_depths) { |
| for (const auto &block : sizes) { |
| result.push_back(TestParam<T>(block, bit_depth, test_func)); |
| } |
| } |
| return result; |
| } |
| |
| template <typename T> |
| std::vector<TestParam<T>> GetLowbdLumaTestParams(T test_func) { |
| return GetLumaTestParams({ 8 }, test_func); |
| } |
| |
| template <typename T> |
| ::testing::internal::ParamGenerator<TestParam<T>> BuildLowbdLumaParams( |
| T test_func) { |
| return ::testing::ValuesIn(GetLowbdLumaTestParams(test_func)); |
| } |
| |
| TEST_F(AV1ConvolveParametersTest, GetLowbdLumaTestParams) { |
| auto v = GetLowbdLumaTestParams(av1_dist_wtd_convolve_x_c); |
| ASSERT_EQ(22U, v.size()); |
| for (const auto &e : v) { |
| ASSERT_EQ(8, e.BitDepth()); |
| bool same_fn = av1_dist_wtd_convolve_x_c == e.TestFunction(); |
| ASSERT_TRUE(same_fn); |
| } |
| } |
| |
| #if CONFIG_AV1_HIGHBITDEPTH |
| template <typename T> |
| std::vector<TestParam<T>> GetHighbdLumaTestParams(T test_func) { |
| return GetLumaTestParams({ 10, 12 }, test_func); |
| } |
| |
| TEST_F(AV1ConvolveParametersTest, GetHighbdLumaTestParams) { |
| auto v = GetHighbdLumaTestParams(av1_highbd_dist_wtd_convolve_x_c); |
| ASSERT_EQ(44U, v.size()); |
| int num_10 = 0; |
| int num_12 = 0; |
| for (const auto &e : v) { |
| ASSERT_TRUE(10 == e.BitDepth() || 12 == e.BitDepth()); |
| bool same_fn = av1_highbd_dist_wtd_convolve_x_c == e.TestFunction(); |
| ASSERT_TRUE(same_fn); |
| if (e.BitDepth() == 10) { |
| ++num_10; |
| } else { |
| ++num_12; |
| } |
| } |
| ASSERT_EQ(num_10, num_12); |
| } |
| |
| template <typename T> |
| ::testing::internal::ParamGenerator<TestParam<T>> BuildHighbdLumaParams( |
| T test_func) { |
| return ::testing::ValuesIn(GetHighbdLumaTestParams(test_func)); |
| } |
| |
| #endif // CONFIG_AV1_HIGHBITDEPTH |
| |
| // Compound cases also need to test different frame offsets and weightings. |
| class CompoundParam { |
| public: |
| CompoundParam(bool use_dist_wtd_comp_avg, int fwd_offset, int bck_offset) |
| : use_dist_wtd_comp_avg_(use_dist_wtd_comp_avg), fwd_offset_(fwd_offset), |
| bck_offset_(bck_offset) {} |
| |
| bool UseDistWtdCompAvg() const { return use_dist_wtd_comp_avg_; } |
| int FwdOffset() const { return fwd_offset_; } |
| int BckOffset() const { return bck_offset_; } |
| |
| private: |
| bool use_dist_wtd_comp_avg_; |
| int fwd_offset_; |
| int bck_offset_; |
| }; |
| |
| std::vector<CompoundParam> GetCompoundParams() { |
| std::vector<CompoundParam> result; |
| result.push_back(CompoundParam(false, 0, 0)); |
| for (int k = 0; k < 2; ++k) { |
| for (int l = 0; l < 4; ++l) { |
| result.push_back(CompoundParam(true, quant_dist_lookup_table[l][k], |
| quant_dist_lookup_table[l][1 - k])); |
| } |
| } |
| return result; |
| } |
| |
| TEST_F(AV1ConvolveParametersTest, GetCompoundParams) { |
| auto v = GetCompoundParams(); |
| ASSERT_EQ(9U, v.size()); |
| ASSERT_FALSE(v[0].UseDistWtdCompAvg()); |
| for (size_t i = 1; i < v.size(); ++i) { |
| ASSERT_TRUE(v[i].UseDistWtdCompAvg()); |
| } |
| } |
| |
| //////////////////////////////////////////////// |
| // Compound convolve-x functions (low bit-depth) |
| //////////////////////////////////////////////// |
| |
| ConvolveParams GetConvolveParams(int do_average, CONV_BUF_TYPE *conv_buf, |
| int width, int bit_depth, |
| const CompoundParam &compound) { |
| ConvolveParams conv_params = |
| get_conv_params_no_round(do_average, 0, conv_buf, width, 1, bit_depth); |
| conv_params.use_dist_wtd_comp_avg = compound.UseDistWtdCompAvg(); |
| conv_params.fwd_offset = compound.FwdOffset(); |
| conv_params.bck_offset = compound.BckOffset(); |
| return conv_params; |
| } |
| |
| class AV1ConvolveXCompoundTest : public AV1ConvolveTest<convolve_x_func> { |
| public: |
| void RunTest() { |
| auto compound_params = GetCompoundParams(); |
| for (int sub_pix = 0; sub_pix < 16; ++sub_pix) { |
| for (int f = EIGHTTAP_REGULAR; f < INTERP_FILTERS_ALL; ++f) { |
| for (const auto &c : compound_params) { |
| TestConvolve(sub_pix, static_cast<InterpFilter>(f), c); |
| } |
| } |
| } |
| } |
| |
| protected: |
| virtual const InterpFilterParams *FilterParams(InterpFilter f, |
| const BlockSize &block) const { |
| return av1_get_interp_filter_params_with_block_size(f, block.Width()); |
| } |
| |
| virtual convolve_x_func ReferenceFunc() const { |
| return av1_dist_wtd_convolve_x; |
| } |
| |
| private: |
| void TestConvolve(const int sub_pix, const InterpFilter filter, |
| const CompoundParam &compound) { |
| const int width = GetParam().Block().Width(); |
| const int height = GetParam().Block().Height(); |
| const uint8_t *input1 = FirstRandomInput8(GetParam()); |
| const uint8_t *input2 = SecondRandomInput8(GetParam()); |
| DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); |
| DECLARE_ALIGNED(32, CONV_BUF_TYPE, reference_conv_buf[MAX_SB_SQUARE]); |
| Convolve(ReferenceFunc(), input1, input2, reference, reference_conv_buf, |
| compound, sub_pix, filter); |
| |
| DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); |
| DECLARE_ALIGNED(32, CONV_BUF_TYPE, test_conv_buf[MAX_SB_SQUARE]); |
| Convolve(GetParam().TestFunction(), input1, input2, test, test_conv_buf, |
| compound, sub_pix, filter); |
| |
| AssertOutputBufferEq(reference_conv_buf, test_conv_buf, width, height); |
| AssertOutputBufferEq(reference, test, width, height); |
| } |
| |
| private: |
| void Convolve(convolve_x_func test_func, const uint8_t *src1, |
| const uint8_t *src2, uint8_t *dst, CONV_BUF_TYPE *conv_buf, |
| const CompoundParam &compound, const int sub_pix, |
| const InterpFilter filter) { |
| const int width = GetParam().Block().Width(); |
| const int height = GetParam().Block().Height(); |
| const InterpFilterParams *filter_params = |
| FilterParams(filter, GetParam().Block()); |
| |
| ConvolveParams conv_params = |
| GetConvolveParams(0, conv_buf, kOutputStride, 8, compound); |
| test_func(src1, width, dst, kOutputStride, width, height, filter_params, |
| sub_pix, &conv_params); |
| |
| conv_params = GetConvolveParams(1, conv_buf, kOutputStride, 8, compound); |
| test_func(src2, width, dst, kOutputStride, width, height, filter_params, |
| sub_pix, &conv_params); |
| } |
| }; |
| |
| TEST_P(AV1ConvolveXCompoundTest, RunTest) { RunTest(); } |
| |
| INSTANTIATE_TEST_SUITE_P(C, AV1ConvolveXCompoundTest, |
| BuildLowbdLumaParams(av1_dist_wtd_convolve_x_c)); |
| |
| #if HAVE_SSE2 |
| INSTANTIATE_TEST_SUITE_P(SSE2, AV1ConvolveXCompoundTest, |
| BuildLowbdLumaParams(av1_dist_wtd_convolve_x_sse2)); |
| #endif |
| |
| #if HAVE_AVX2 |
| INSTANTIATE_TEST_SUITE_P(AVX2, AV1ConvolveXCompoundTest, |
| BuildLowbdLumaParams(av1_dist_wtd_convolve_x_avx2)); |
| #endif |
| |
| #if HAVE_NEON |
| INSTANTIATE_TEST_SUITE_P(NEON, AV1ConvolveXCompoundTest, |
| BuildLowbdLumaParams(av1_dist_wtd_convolve_x_neon)); |
| #endif |
| |
| #if CONFIG_AV1_HIGHBITDEPTH |
| ///////////////////////////////////////////////// |
| // Compound convolve-x functions (high bit-depth) |
| ///////////////////////////////////////////////// |
| class AV1ConvolveXHighbdCompoundTest |
| : public AV1ConvolveTest<highbd_convolve_x_func> { |
| public: |
| void RunTest() { |
| auto compound_params = GetCompoundParams(); |
| for (int sub_pix = 0; sub_pix < 16; ++sub_pix) { |
| for (int f = EIGHTTAP_REGULAR; f < INTERP_FILTERS_ALL; ++f) { |
| for (const auto &c : compound_params) { |
| TestConvolve(sub_pix, static_cast<InterpFilter>(f), c); |
| } |
| } |
| } |
| } |
| |
| protected: |
| virtual const InterpFilterParams *FilterParams(InterpFilter f, |
| const BlockSize &block) const { |
| return av1_get_interp_filter_params_with_block_size(f, block.Width()); |
| } |
| |
| virtual highbd_convolve_x_func ReferenceFunc() const { |
| return av1_highbd_dist_wtd_convolve_x; |
| } |
| |
| private: |
| void TestConvolve(const int sub_pix, const InterpFilter filter, |
| const CompoundParam &compound) { |
| const int width = GetParam().Block().Width(); |
| const int height = GetParam().Block().Height(); |
| |
| const uint16_t *input1 = FirstRandomInput16(GetParam()); |
| const uint16_t *input2 = SecondRandomInput16(GetParam()); |
| DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); |
| DECLARE_ALIGNED(32, CONV_BUF_TYPE, reference_conv_buf[MAX_SB_SQUARE]); |
| Convolve(ReferenceFunc(), input1, input2, reference, reference_conv_buf, |
| compound, sub_pix, filter); |
| |
| DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); |
| DECLARE_ALIGNED(32, CONV_BUF_TYPE, test_conv_buf[MAX_SB_SQUARE]); |
| Convolve(GetParam().TestFunction(), input1, input2, test, test_conv_buf, |
| compound, sub_pix, filter); |
| |
| AssertOutputBufferEq(reference_conv_buf, test_conv_buf, width, height); |
| AssertOutputBufferEq(reference, test, width, height); |
| } |
| |
| void Convolve(highbd_convolve_x_func test_func, const uint16_t *src1, |
| const uint16_t *src2, uint16_t *dst, CONV_BUF_TYPE *conv_buf, |
| const CompoundParam &compound, const int sub_pix, |
| const InterpFilter filter) { |
| const int width = GetParam().Block().Width(); |
| const int height = GetParam().Block().Height(); |
| const int bit_depth = GetParam().BitDepth(); |
| const InterpFilterParams *filter_params = |
| FilterParams(filter, GetParam().Block()); |
| ConvolveParams conv_params = |
| GetConvolveParams(0, conv_buf, kOutputStride, bit_depth, compound); |
| test_func(src1, width, dst, kOutputStride, width, height, filter_params, |
| sub_pix, &conv_params, bit_depth); |
| conv_params = |
| GetConvolveParams(1, conv_buf, kOutputStride, bit_depth, compound); |
| test_func(src2, width, dst, kOutputStride, width, height, filter_params, |
| sub_pix, &conv_params, bit_depth); |
| } |
| }; |
| |
| TEST_P(AV1ConvolveXHighbdCompoundTest, RunTest) { RunTest(); } |
| |
| INSTANTIATE_TEST_SUITE_P( |
| C, AV1ConvolveXHighbdCompoundTest, |
| BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_x_c)); |
| |
| #if HAVE_SSE4_1 |
| INSTANTIATE_TEST_SUITE_P( |
| SSE4_1, AV1ConvolveXHighbdCompoundTest, |
| BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_x_sse4_1)); |
| #endif |
| |
| #if HAVE_AVX2 |
| INSTANTIATE_TEST_SUITE_P( |
| AVX2, AV1ConvolveXHighbdCompoundTest, |
| BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_x_avx2)); |
| #endif |
| |
| #endif // CONFIG_AV1_HIGHBITDEPTH |
| |
| //////////////////////////////////////////////// |
| // Compound convolve-y functions (low bit-depth) |
| //////////////////////////////////////////////// |
| |
| // Note that the X and Y convolve functions have the same type signature and |
| // logic; they only differentiate the filter parameters and reference function. |
| class AV1ConvolveYCompoundTest : public AV1ConvolveXCompoundTest { |
| protected: |
| virtual const InterpFilterParams *FilterParams( |
| InterpFilter f, const BlockSize &block) const override { |
| return av1_get_interp_filter_params_with_block_size(f, block.Height()); |
| } |
| |
| virtual convolve_x_func ReferenceFunc() const override { |
| return av1_dist_wtd_convolve_y; |
| } |
| }; |
| |
| TEST_P(AV1ConvolveYCompoundTest, RunTest) { RunTest(); } |
| |
| INSTANTIATE_TEST_SUITE_P(C, AV1ConvolveYCompoundTest, |
| BuildLowbdLumaParams(av1_dist_wtd_convolve_y_c)); |
| |
| #if HAVE_SSE2 |
| INSTANTIATE_TEST_SUITE_P(SSE2, AV1ConvolveYCompoundTest, |
| BuildLowbdLumaParams(av1_dist_wtd_convolve_y_sse2)); |
| #endif |
| |
| #if HAVE_AVX2 |
| INSTANTIATE_TEST_SUITE_P(AVX2, AV1ConvolveYCompoundTest, |
| BuildLowbdLumaParams(av1_dist_wtd_convolve_y_avx2)); |
| #endif |
| |
| #if HAVE_NEON |
| INSTANTIATE_TEST_SUITE_P(NEON, AV1ConvolveYCompoundTest, |
| BuildLowbdLumaParams(av1_dist_wtd_convolve_y_neon)); |
| #endif |
| |
| #if CONFIG_AV1_HIGHBITDEPTH |
| ///////////////////////////////////////////////// |
| // Compound convolve-y functions (high bit-depth) |
| ///////////////////////////////////////////////// |
| |
| // Again, the X and Y convolve functions have the same type signature and logic. |
| class AV1ConvolveYHighbdCompoundTest : public AV1ConvolveXHighbdCompoundTest { |
| virtual highbd_convolve_x_func ReferenceFunc() const override { |
| return av1_highbd_dist_wtd_convolve_y; |
| } |
| virtual const InterpFilterParams *FilterParams( |
| InterpFilter f, const BlockSize &block) const override { |
| return av1_get_interp_filter_params_with_block_size(f, block.Height()); |
| } |
| }; |
| |
| TEST_P(AV1ConvolveYHighbdCompoundTest, RunTest) { RunTest(); } |
| |
| INSTANTIATE_TEST_SUITE_P( |
| C, AV1ConvolveYHighbdCompoundTest, |
| BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_y_c)); |
| |
| #if HAVE_SSE4_1 |
| INSTANTIATE_TEST_SUITE_P( |
| SSE4_1, AV1ConvolveYHighbdCompoundTest, |
| BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_y_sse4_1)); |
| #endif |
| |
| #if HAVE_AVX2 |
| INSTANTIATE_TEST_SUITE_P( |
| AVX2, AV1ConvolveYHighbdCompoundTest, |
| BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_y_avx2)); |
| #endif |
| |
| #endif // CONFIG_AV1_HIGHBITDEPTH |
| |
| ////////////////////////////////////////////////////// |
| // Compound convolve-2d-copy functions (low bit-depth) |
| ////////////////////////////////////////////////////// |
| typedef void (*compound_conv_2d_copy_func)(const uint8_t *src, int src_stride, |
| uint8_t *dst, int dst_stride, int w, |
| int h, ConvolveParams *conv_params); |
| |
| class AV1Convolve2DCopyCompoundTest |
| : public AV1ConvolveTest<compound_conv_2d_copy_func> { |
| public: |
| void RunTest() { |
| auto compound_params = GetCompoundParams(); |
| for (const auto &compound : compound_params) { |
| TestConvolve(compound); |
| } |
| } |
| |
| private: |
| void TestConvolve(const CompoundParam &compound) { |
| const BlockSize &block = GetParam().Block(); |
| const int width = block.Width(); |
| const int height = block.Height(); |
| |
| const uint8_t *input1 = FirstRandomInput8(GetParam()); |
| const uint8_t *input2 = SecondRandomInput8(GetParam()); |
| DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); |
| DECLARE_ALIGNED(32, CONV_BUF_TYPE, reference_conv_buf[MAX_SB_SQUARE]); |
| Convolve(av1_dist_wtd_convolve_2d_copy, input1, input2, reference, |
| reference_conv_buf, compound); |
| |
| DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); |
| DECLARE_ALIGNED(32, CONV_BUF_TYPE, test_conv_buf[MAX_SB_SQUARE]); |
| Convolve(GetParam().TestFunction(), input1, input2, test, test_conv_buf, |
| compound); |
| |
| AssertOutputBufferEq(reference_conv_buf, test_conv_buf, width, height); |
| AssertOutputBufferEq(reference, test, width, height); |
| } |
| |
| private: |
| void Convolve(compound_conv_2d_copy_func test_func, const uint8_t *src1, |
| const uint8_t *src2, uint8_t *dst, uint16_t *conv_buf, |
| const CompoundParam &compound) { |
| const BlockSize &block = GetParam().Block(); |
| const int width = block.Width(); |
| const int height = block.Height(); |
| ConvolveParams conv_params = |
| GetConvolveParams(0, conv_buf, kOutputStride, 8, compound); |
| test_func(src1, width, dst, kOutputStride, width, height, &conv_params); |
| |
| conv_params = GetConvolveParams(1, conv_buf, kOutputStride, 8, compound); |
| test_func(src2, width, dst, kOutputStride, width, height, &conv_params); |
| } |
| }; |
| |
| TEST_P(AV1Convolve2DCopyCompoundTest, RunTest) { RunTest(); } |
| |
| INSTANTIATE_TEST_SUITE_P(C, AV1Convolve2DCopyCompoundTest, |
| BuildLowbdLumaParams(av1_dist_wtd_convolve_2d_copy_c)); |
| |
| #if HAVE_SSE2 |
| INSTANTIATE_TEST_SUITE_P( |
| SSE2, AV1Convolve2DCopyCompoundTest, |
| BuildLowbdLumaParams(av1_dist_wtd_convolve_2d_copy_sse2)); |
| #endif |
| |
| #if HAVE_AVX2 |
| INSTANTIATE_TEST_SUITE_P( |
| AVX2, AV1Convolve2DCopyCompoundTest, |
| BuildLowbdLumaParams(av1_dist_wtd_convolve_2d_copy_avx2)); |
| #endif |
| |
| #if HAVE_NEON |
| INSTANTIATE_TEST_SUITE_P( |
| NEON, AV1Convolve2DCopyCompoundTest, |
| BuildLowbdLumaParams(av1_dist_wtd_convolve_2d_copy_neon)); |
| #endif |
| |
| #if CONFIG_AV1_HIGHBITDEPTH |
| /////////////////////////////////////////////////////// |
| // Compound convolve-2d-copy functions (high bit-depth) |
| /////////////////////////////////////////////////////// |
| typedef void (*highbd_compound_conv_2d_copy_func)(const uint16_t *src, |
| int src_stride, uint16_t *dst, |
| int dst_stride, int w, int h, |
| ConvolveParams *conv_params, |
| int bd); |
| |
| class AV1Convolve2DCopyHighbdCompoundTest |
| : public AV1ConvolveTest<highbd_compound_conv_2d_copy_func> { |
| public: |
| void RunTest() { |
| auto compound_params = GetCompoundParams(); |
| for (const auto &compound : compound_params) { |
| TestConvolve(compound); |
| } |
| } |
| |
| private: |
| void TestConvolve(const CompoundParam &compound) { |
| const BlockSize &block = GetParam().Block(); |
| const int width = block.Width(); |
| const int height = block.Height(); |
| |
| const uint16_t *input1 = FirstRandomInput16(GetParam()); |
| const uint16_t *input2 = SecondRandomInput16(GetParam()); |
| DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); |
| DECLARE_ALIGNED(32, CONV_BUF_TYPE, reference_conv_buf[MAX_SB_SQUARE]); |
| Convolve(av1_highbd_dist_wtd_convolve_2d_copy, input1, input2, reference, |
| reference_conv_buf, compound); |
| |
| DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); |
| DECLARE_ALIGNED(32, CONV_BUF_TYPE, test_conv_buf[MAX_SB_SQUARE]); |
| Convolve(GetParam().TestFunction(), input1, input2, test, test_conv_buf, |
| compound); |
| |
| AssertOutputBufferEq(reference_conv_buf, test_conv_buf, width, height); |
| AssertOutputBufferEq(reference, test, width, height); |
| } |
| |
| void Convolve(highbd_compound_conv_2d_copy_func test_func, |
| const uint16_t *src1, const uint16_t *src2, uint16_t *dst, |
| uint16_t *conv_buf, const CompoundParam &compound) { |
| const BlockSize &block = GetParam().Block(); |
| const int width = block.Width(); |
| const int height = block.Height(); |
| const int bit_depth = GetParam().BitDepth(); |
| |
| ConvolveParams conv_params = |
| GetConvolveParams(0, conv_buf, kOutputStride, bit_depth, compound); |
| test_func(src1, width, dst, kOutputStride, width, height, &conv_params, |
| bit_depth); |
| |
| conv_params = |
| GetConvolveParams(1, conv_buf, kOutputStride, bit_depth, compound); |
| test_func(src2, width, dst, kOutputStride, width, height, &conv_params, |
| bit_depth); |
| } |
| }; |
| |
| TEST_P(AV1Convolve2DCopyHighbdCompoundTest, RunTest) { RunTest(); } |
| |
| INSTANTIATE_TEST_SUITE_P( |
| C, AV1Convolve2DCopyHighbdCompoundTest, |
| BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_2d_copy_c)); |
| |
| #if HAVE_SSE4_1 |
| INSTANTIATE_TEST_SUITE_P( |
| SSE4_1, AV1Convolve2DCopyHighbdCompoundTest, |
| BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_2d_copy_sse4_1)); |
| #endif |
| |
| #if HAVE_AVX2 |
| INSTANTIATE_TEST_SUITE_P( |
| AVX2, AV1Convolve2DCopyHighbdCompoundTest, |
| BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_2d_copy_avx2)); |
| #endif |
| |
| #endif // CONFIG_AV1_HIGHBITDEPTH |
| |
| ///////////////////////////////////////////////// |
| // Compound convolve-2d functions (low bit-depth) |
| ///////////////////////////////////////////////// |
| |
| class AV1Convolve2DCompoundTest : public AV1ConvolveTest<convolve_2d_func> { |
| public: |
| void RunTest() { |
| auto compound_params = GetCompoundParams(); |
| for (int h_f = EIGHTTAP_REGULAR; h_f < INTERP_FILTERS_ALL; ++h_f) { |
| for (int v_f = EIGHTTAP_REGULAR; v_f < INTERP_FILTERS_ALL; ++v_f) { |
| for (int sub_x = 0; sub_x < 16; ++sub_x) { |
| for (int sub_y = 0; sub_y < 16; ++sub_y) { |
| for (const auto &compound : compound_params) { |
| TestConvolve(static_cast<InterpFilter>(h_f), |
| static_cast<InterpFilter>(v_f), sub_x, sub_y, |
| compound); |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| private: |
| void TestConvolve(const InterpFilter h_f, const InterpFilter v_f, |
| const int sub_x, const int sub_y, |
| const CompoundParam &compound) { |
| const BlockSize &block = GetParam().Block(); |
| const int width = block.Width(); |
| const int height = block.Height(); |
| |
| const uint8_t *input1 = FirstRandomInput8(GetParam()); |
| const uint8_t *input2 = SecondRandomInput8(GetParam()); |
| DECLARE_ALIGNED(32, uint8_t, reference[MAX_SB_SQUARE]); |
| DECLARE_ALIGNED(32, CONV_BUF_TYPE, reference_conv_buf[MAX_SB_SQUARE]); |
| Convolve(av1_dist_wtd_convolve_2d, input1, input2, reference, |
| reference_conv_buf, compound, h_f, v_f, sub_x, sub_y); |
| |
| DECLARE_ALIGNED(32, uint8_t, test[MAX_SB_SQUARE]); |
| DECLARE_ALIGNED(32, CONV_BUF_TYPE, test_conv_buf[MAX_SB_SQUARE]); |
| Convolve(GetParam().TestFunction(), input1, input2, test, test_conv_buf, |
| compound, h_f, v_f, sub_x, sub_y); |
| |
| AssertOutputBufferEq(reference_conv_buf, test_conv_buf, width, height); |
| AssertOutputBufferEq(reference, test, width, height); |
| } |
| |
| private: |
| void Convolve(convolve_2d_func test_func, const uint8_t *src1, |
| const uint8_t *src2, uint8_t *dst, uint16_t *conv_buf, |
| const CompoundParam &compound, const InterpFilter h_f, |
| const InterpFilter v_f, const int sub_x, const int sub_y) { |
| const BlockSize &block = GetParam().Block(); |
| const int width = block.Width(); |
| const int height = block.Height(); |
| |
| const InterpFilterParams *filter_params_x = |
| av1_get_interp_filter_params_with_block_size(h_f, width); |
| const InterpFilterParams *filter_params_y = |
| av1_get_interp_filter_params_with_block_size(v_f, height); |
| ConvolveParams conv_params = |
| GetConvolveParams(0, conv_buf, kOutputStride, 8, compound); |
| |
| test_func(src1, width, dst, kOutputStride, width, height, filter_params_x, |
| filter_params_y, sub_x, sub_y, &conv_params); |
| |
| conv_params = GetConvolveParams(1, conv_buf, kOutputStride, 8, compound); |
| test_func(src2, width, dst, kOutputStride, width, height, filter_params_x, |
| filter_params_y, sub_x, sub_y, &conv_params); |
| } |
| }; |
| |
| TEST_P(AV1Convolve2DCompoundTest, RunTest) { RunTest(); } |
| |
| INSTANTIATE_TEST_SUITE_P(C, AV1Convolve2DCompoundTest, |
| BuildLowbdLumaParams(av1_dist_wtd_convolve_2d_c)); |
| |
| #if HAVE_SSE2 |
| INSTANTIATE_TEST_SUITE_P(SSE2, AV1Convolve2DCompoundTest, |
| BuildLowbdLumaParams(av1_dist_wtd_convolve_2d_sse2)); |
| #endif |
| |
| #if HAVE_SSSE3 |
| INSTANTIATE_TEST_SUITE_P(SSSE3, AV1Convolve2DCompoundTest, |
| BuildLowbdLumaParams(av1_dist_wtd_convolve_2d_ssse3)); |
| #endif |
| |
| #if HAVE_AVX2 |
| INSTANTIATE_TEST_SUITE_P(AVX2, AV1Convolve2DCompoundTest, |
| BuildLowbdLumaParams(av1_dist_wtd_convolve_2d_avx2)); |
| #endif |
| |
| #if HAVE_NEON |
| INSTANTIATE_TEST_SUITE_P(NEON, AV1Convolve2DCompoundTest, |
| BuildLowbdLumaParams(av1_dist_wtd_convolve_2d_neon)); |
| #endif |
| |
| #if CONFIG_AV1_HIGHBITDEPTH |
| ////////////////////////////////////////////////// |
| // Compound convolve-2d functions (high bit-depth) |
| ////////////////////////////////////////////////// |
| |
| class AV1Convolve2DHighbdCompoundTest |
| : public AV1ConvolveTest<highbd_convolve_2d_func> { |
| public: |
| void RunTest() { |
| auto compound_params = GetCompoundParams(); |
| for (int h_f = EIGHTTAP_REGULAR; h_f < INTERP_FILTERS_ALL; ++h_f) { |
| for (int v_f = EIGHTTAP_REGULAR; v_f < INTERP_FILTERS_ALL; ++v_f) { |
| for (int sub_x = 0; sub_x < 16; ++sub_x) { |
| for (int sub_y = 0; sub_y < 16; ++sub_y) { |
| for (const auto &compound : compound_params) { |
| TestConvolve(static_cast<InterpFilter>(h_f), |
| static_cast<InterpFilter>(v_f), sub_x, sub_y, |
| compound); |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| private: |
| void TestConvolve(const InterpFilter h_f, const InterpFilter v_f, |
| const int sub_x, const int sub_y, |
| const CompoundParam &compound) { |
| const BlockSize &block = GetParam().Block(); |
| const int width = block.Width(); |
| const int height = block.Height(); |
| const uint16_t *input1 = FirstRandomInput16(GetParam()); |
| const uint16_t *input2 = SecondRandomInput16(GetParam()); |
| DECLARE_ALIGNED(32, uint16_t, reference[MAX_SB_SQUARE]); |
| DECLARE_ALIGNED(32, CONV_BUF_TYPE, reference_conv_buf[MAX_SB_SQUARE]); |
| Convolve(av1_highbd_dist_wtd_convolve_2d, input1, input2, reference, |
| reference_conv_buf, compound, h_f, v_f, sub_x, sub_y); |
| |
| DECLARE_ALIGNED(32, uint16_t, test[MAX_SB_SQUARE]); |
| DECLARE_ALIGNED(32, CONV_BUF_TYPE, test_conv_buf[MAX_SB_SQUARE]); |
| Convolve(GetParam().TestFunction(), input1, input2, test, test_conv_buf, |
| compound, h_f, v_f, sub_x, sub_y); |
| |
| AssertOutputBufferEq(reference_conv_buf, test_conv_buf, width, height); |
| AssertOutputBufferEq(reference, test, width, height); |
| } |
| |
| private: |
| void Convolve(highbd_convolve_2d_func test_func, const uint16_t *src1, |
| const uint16_t *src2, uint16_t *dst, uint16_t *conv_buf, |
| const CompoundParam &compound, const InterpFilter h_f, |
| const InterpFilter v_f, const int sub_x, const int sub_y) { |
| const BlockSize &block = GetParam().Block(); |
| const int width = block.Width(); |
| const int height = block.Height(); |
| |
| const InterpFilterParams *filter_params_x = |
| av1_get_interp_filter_params_with_block_size(h_f, width); |
| const InterpFilterParams *filter_params_y = |
| av1_get_interp_filter_params_with_block_size(v_f, height); |
| const int bit_depth = GetParam().BitDepth(); |
| ConvolveParams conv_params = |
| GetConvolveParams(0, conv_buf, kOutputStride, bit_depth, compound); |
| test_func(src1, width, dst, kOutputStride, width, height, filter_params_x, |
| filter_params_y, sub_x, sub_y, &conv_params, bit_depth); |
| |
| conv_params = |
| GetConvolveParams(1, conv_buf, kOutputStride, bit_depth, compound); |
| test_func(src2, width, dst, kOutputStride, width, height, filter_params_x, |
| filter_params_y, sub_x, sub_y, &conv_params, bit_depth); |
| } |
| }; |
| |
| TEST_P(AV1Convolve2DHighbdCompoundTest, RunTest) { RunTest(); } |
| |
| INSTANTIATE_TEST_SUITE_P( |
| C, AV1Convolve2DHighbdCompoundTest, |
| BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_2d_c)); |
| |
| #if HAVE_SSE4_1 |
| INSTANTIATE_TEST_SUITE_P( |
| SSE4_1, AV1Convolve2DHighbdCompoundTest, |
| BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_2d_sse4_1)); |
| #endif |
| |
| #if HAVE_AVX2 |
| INSTANTIATE_TEST_SUITE_P( |
| AVX2, AV1Convolve2DHighbdCompoundTest, |
| BuildHighbdLumaParams(av1_highbd_dist_wtd_convolve_2d_avx2)); |
| #endif |
| |
| #endif // CONFIG_AV1_HIGHBITDEPTH |
| |
| } // namespace |