| /* |
| * Copyright (c) 2016, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 2 Clause License and |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License |
| * was not distributed with this source code in the LICENSE file, you can |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open |
| * Media Patent License 1.0 was not distributed with this source code in the |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. |
| */ |
| |
| #include <assert.h> |
| |
| #include "config/aom_config.h" |
| #include "config/aom_scale_rtcd.h" |
| |
| #include "aom/aom_integer.h" |
| #include "aom_mem/aom_mem.h" |
| #include "aom_ports/mem.h" |
| #include "aom_scale/yv12config.h" |
| |
| static void extend_plane(uint8_t *const src, int src_stride, int width, |
| int height, int extend_top, int extend_left, |
| int extend_bottom, int extend_right) { |
| int i; |
| const int linesize = extend_left + extend_right + width; |
| |
| /* copy the left and right most columns out */ |
| uint8_t *src_ptr1 = src; |
| uint8_t *src_ptr2 = src + width - 1; |
| uint8_t *dst_ptr1 = src - extend_left; |
| uint8_t *dst_ptr2 = src + width; |
| |
| for (i = 0; i < height; ++i) { |
| memset(dst_ptr1, src_ptr1[0], extend_left); |
| memset(dst_ptr2, src_ptr2[0], extend_right); |
| src_ptr1 += src_stride; |
| src_ptr2 += src_stride; |
| dst_ptr1 += src_stride; |
| dst_ptr2 += src_stride; |
| } |
| |
| /* Now copy the top and bottom lines into each line of the respective |
| * borders |
| */ |
| src_ptr1 = src - extend_left; |
| src_ptr2 = src + src_stride * (height - 1) - extend_left; |
| dst_ptr1 = src + src_stride * -extend_top - extend_left; |
| dst_ptr2 = src + src_stride * height - extend_left; |
| |
| for (i = 0; i < extend_top; ++i) { |
| memcpy(dst_ptr1, src_ptr1, linesize); |
| dst_ptr1 += src_stride; |
| } |
| |
| for (i = 0; i < extend_bottom; ++i) { |
| memcpy(dst_ptr2, src_ptr2, linesize); |
| dst_ptr2 += src_stride; |
| } |
| } |
| |
| static void extend_plane_high(uint8_t *const src8, int src_stride, int width, |
| int height, int extend_top, int extend_left, |
| int extend_bottom, int extend_right) { |
| int i; |
| const int linesize = extend_left + extend_right + width; |
| uint16_t *src = CONVERT_TO_SHORTPTR(src8); |
| |
| /* copy the left and right most columns out */ |
| uint16_t *src_ptr1 = src; |
| uint16_t *src_ptr2 = src + width - 1; |
| uint16_t *dst_ptr1 = src - extend_left; |
| uint16_t *dst_ptr2 = src + width; |
| |
| for (i = 0; i < height; ++i) { |
| aom_memset16(dst_ptr1, src_ptr1[0], extend_left); |
| aom_memset16(dst_ptr2, src_ptr2[0], extend_right); |
| src_ptr1 += src_stride; |
| src_ptr2 += src_stride; |
| dst_ptr1 += src_stride; |
| dst_ptr2 += src_stride; |
| } |
| |
| /* Now copy the top and bottom lines into each line of the respective |
| * borders |
| */ |
| src_ptr1 = src - extend_left; |
| src_ptr2 = src + src_stride * (height - 1) - extend_left; |
| dst_ptr1 = src + src_stride * -extend_top - extend_left; |
| dst_ptr2 = src + src_stride * height - extend_left; |
| |
| for (i = 0; i < extend_top; ++i) { |
| memcpy(dst_ptr1, src_ptr1, linesize * sizeof(uint16_t)); |
| dst_ptr1 += src_stride; |
| } |
| |
| for (i = 0; i < extend_bottom; ++i) { |
| memcpy(dst_ptr2, src_ptr2, linesize * sizeof(uint16_t)); |
| dst_ptr2 += src_stride; |
| } |
| } |
| |
| void aom_yv12_extend_frame_borders_c(YV12_BUFFER_CONFIG *ybf, |
| const int num_planes) { |
| assert(ybf->border % 2 == 0); |
| assert(ybf->y_height - ybf->y_crop_height < 16); |
| assert(ybf->y_width - ybf->y_crop_width < 16); |
| assert(ybf->y_height - ybf->y_crop_height >= 0); |
| assert(ybf->y_width - ybf->y_crop_width >= 0); |
| |
| if (ybf->flags & YV12_FLAG_HIGHBITDEPTH) { |
| for (int plane = 0; plane < num_planes; ++plane) { |
| const int is_uv = plane > 0; |
| const int plane_border = ybf->border >> is_uv; |
| extend_plane_high( |
| ybf->buffers[plane], ybf->strides[is_uv], ybf->crop_widths[is_uv], |
| ybf->crop_heights[is_uv], plane_border, plane_border, |
| plane_border + ybf->heights[is_uv] - ybf->crop_heights[is_uv], |
| plane_border + ybf->widths[is_uv] - ybf->crop_widths[is_uv]); |
| } |
| return; |
| } |
| for (int plane = 0; plane < num_planes; ++plane) { |
| const int is_uv = plane > 0; |
| const int plane_border = ybf->border >> is_uv; |
| extend_plane(ybf->buffers[plane], ybf->strides[is_uv], |
| ybf->crop_widths[is_uv], ybf->crop_heights[is_uv], |
| plane_border, plane_border, |
| plane_border + ybf->heights[is_uv] - ybf->crop_heights[is_uv], |
| plane_border + ybf->widths[is_uv] - ybf->crop_widths[is_uv]); |
| } |
| } |
| |
| static void extend_frame(YV12_BUFFER_CONFIG *const ybf, int ext_size, |
| const int num_planes) { |
| const int ss_x = ybf->uv_width < ybf->y_width; |
| const int ss_y = ybf->uv_height < ybf->y_height; |
| |
| assert(ybf->y_height - ybf->y_crop_height < 16); |
| assert(ybf->y_width - ybf->y_crop_width < 16); |
| assert(ybf->y_height - ybf->y_crop_height >= 0); |
| assert(ybf->y_width - ybf->y_crop_width >= 0); |
| |
| if (ybf->flags & YV12_FLAG_HIGHBITDEPTH) { |
| for (int plane = 0; plane < num_planes; ++plane) { |
| const int is_uv = plane > 0; |
| const int top = ext_size >> (is_uv ? ss_y : 0); |
| const int left = ext_size >> (is_uv ? ss_x : 0); |
| const int bottom = top + ybf->heights[is_uv] - ybf->crop_heights[is_uv]; |
| const int right = left + ybf->widths[is_uv] - ybf->crop_widths[is_uv]; |
| extend_plane_high(ybf->buffers[plane], ybf->strides[is_uv], |
| ybf->crop_widths[is_uv], ybf->crop_heights[is_uv], top, |
| left, bottom, right); |
| } |
| return; |
| } |
| for (int plane = 0; plane < num_planes; ++plane) { |
| const int is_uv = plane > 0; |
| const int top = ext_size >> (is_uv ? ss_y : 0); |
| const int left = ext_size >> (is_uv ? ss_x : 0); |
| const int bottom = top + ybf->heights[is_uv] - ybf->crop_heights[is_uv]; |
| const int right = left + ybf->widths[is_uv] - ybf->crop_widths[is_uv]; |
| extend_plane(ybf->buffers[plane], ybf->strides[is_uv], |
| ybf->crop_widths[is_uv], ybf->crop_heights[is_uv], top, left, |
| bottom, right); |
| } |
| } |
| |
| void aom_extend_frame_borders_c(YV12_BUFFER_CONFIG *ybf, const int num_planes) { |
| extend_frame(ybf, ybf->border, num_planes); |
| } |
| |
| void aom_extend_frame_inner_borders_c(YV12_BUFFER_CONFIG *ybf, |
| const int num_planes) { |
| const int inner_bw = (ybf->border > AOMINNERBORDERINPIXELS) |
| ? AOMINNERBORDERINPIXELS |
| : ybf->border; |
| extend_frame(ybf, inner_bw, num_planes); |
| } |
| |
| void aom_extend_frame_borders_y_c(YV12_BUFFER_CONFIG *ybf) { |
| int ext_size = ybf->border; |
| assert(ybf->y_height - ybf->y_crop_height < 16); |
| assert(ybf->y_width - ybf->y_crop_width < 16); |
| assert(ybf->y_height - ybf->y_crop_height >= 0); |
| assert(ybf->y_width - ybf->y_crop_width >= 0); |
| |
| if (ybf->flags & YV12_FLAG_HIGHBITDEPTH) { |
| extend_plane_high(ybf->y_buffer, ybf->y_stride, ybf->y_crop_width, |
| ybf->y_crop_height, ext_size, ext_size, |
| ext_size + ybf->y_height - ybf->y_crop_height, |
| ext_size + ybf->y_width - ybf->y_crop_width); |
| return; |
| } |
| extend_plane(ybf->y_buffer, ybf->y_stride, ybf->y_crop_width, |
| ybf->y_crop_height, ext_size, ext_size, |
| ext_size + ybf->y_height - ybf->y_crop_height, |
| ext_size + ybf->y_width - ybf->y_crop_width); |
| } |
| |
| static void memcpy_short_addr(uint8_t *dst8, const uint8_t *src8, int num) { |
| uint16_t *dst = CONVERT_TO_SHORTPTR(dst8); |
| uint16_t *src = CONVERT_TO_SHORTPTR(src8); |
| memcpy(dst, src, num * sizeof(uint16_t)); |
| } |
| |
| // Copies the source image into the destination image and updates the |
| // destination's UMV borders. |
| // Note: The frames are assumed to be identical in size. |
| void aom_yv12_copy_frame_c(const YV12_BUFFER_CONFIG *src_bc, |
| YV12_BUFFER_CONFIG *dst_bc, const int num_planes) { |
| #if 0 |
| /* These assertions are valid in the codec, but the libaom-tester uses |
| * this code slightly differently. |
| */ |
| assert(src_bc->y_width == dst_bc->y_width); |
| assert(src_bc->y_height == dst_bc->y_height); |
| #endif |
| |
| assert((src_bc->flags & YV12_FLAG_HIGHBITDEPTH) == |
| (dst_bc->flags & YV12_FLAG_HIGHBITDEPTH)); |
| |
| if (src_bc->flags & YV12_FLAG_HIGHBITDEPTH) { |
| for (int plane = 0; plane < num_planes; ++plane) { |
| const uint8_t *plane_src = src_bc->buffers[plane]; |
| uint8_t *plane_dst = dst_bc->buffers[plane]; |
| const int is_uv = plane > 0; |
| |
| for (int row = 0; row < src_bc->heights[is_uv]; ++row) { |
| memcpy_short_addr(plane_dst, plane_src, src_bc->widths[is_uv]); |
| plane_src += src_bc->strides[is_uv]; |
| plane_dst += dst_bc->strides[is_uv]; |
| } |
| } |
| aom_yv12_extend_frame_borders_c(dst_bc, num_planes); |
| return; |
| } |
| for (int plane = 0; plane < num_planes; ++plane) { |
| const uint8_t *plane_src = src_bc->buffers[plane]; |
| uint8_t *plane_dst = dst_bc->buffers[plane]; |
| const int is_uv = plane > 0; |
| |
| for (int row = 0; row < src_bc->heights[is_uv]; ++row) { |
| memcpy(plane_dst, plane_src, src_bc->widths[is_uv]); |
| plane_src += src_bc->strides[is_uv]; |
| plane_dst += dst_bc->strides[is_uv]; |
| } |
| } |
| aom_yv12_extend_frame_borders_c(dst_bc, num_planes); |
| } |
| |
| void aom_yv12_copy_y_c(const YV12_BUFFER_CONFIG *src_ybc, |
| YV12_BUFFER_CONFIG *dst_ybc) { |
| int row; |
| const uint8_t *src = src_ybc->y_buffer; |
| uint8_t *dst = dst_ybc->y_buffer; |
| |
| if (src_ybc->flags & YV12_FLAG_HIGHBITDEPTH) { |
| const uint16_t *src16 = CONVERT_TO_SHORTPTR(src); |
| uint16_t *dst16 = CONVERT_TO_SHORTPTR(dst); |
| for (row = 0; row < src_ybc->y_height; ++row) { |
| memcpy(dst16, src16, src_ybc->y_width * sizeof(uint16_t)); |
| src16 += src_ybc->y_stride; |
| dst16 += dst_ybc->y_stride; |
| } |
| return; |
| } |
| |
| for (row = 0; row < src_ybc->y_height; ++row) { |
| memcpy(dst, src, src_ybc->y_width); |
| src += src_ybc->y_stride; |
| dst += dst_ybc->y_stride; |
| } |
| } |
| |
| void aom_yv12_copy_u_c(const YV12_BUFFER_CONFIG *src_bc, |
| YV12_BUFFER_CONFIG *dst_bc) { |
| int row; |
| const uint8_t *src = src_bc->u_buffer; |
| uint8_t *dst = dst_bc->u_buffer; |
| |
| if (src_bc->flags & YV12_FLAG_HIGHBITDEPTH) { |
| const uint16_t *src16 = CONVERT_TO_SHORTPTR(src); |
| uint16_t *dst16 = CONVERT_TO_SHORTPTR(dst); |
| for (row = 0; row < src_bc->uv_height; ++row) { |
| memcpy(dst16, src16, src_bc->uv_width * sizeof(uint16_t)); |
| src16 += src_bc->uv_stride; |
| dst16 += dst_bc->uv_stride; |
| } |
| return; |
| } |
| |
| for (row = 0; row < src_bc->uv_height; ++row) { |
| memcpy(dst, src, src_bc->uv_width); |
| src += src_bc->uv_stride; |
| dst += dst_bc->uv_stride; |
| } |
| } |
| |
| void aom_yv12_copy_v_c(const YV12_BUFFER_CONFIG *src_bc, |
| YV12_BUFFER_CONFIG *dst_bc) { |
| int row; |
| const uint8_t *src = src_bc->v_buffer; |
| uint8_t *dst = dst_bc->v_buffer; |
| |
| if (src_bc->flags & YV12_FLAG_HIGHBITDEPTH) { |
| const uint16_t *src16 = CONVERT_TO_SHORTPTR(src); |
| uint16_t *dst16 = CONVERT_TO_SHORTPTR(dst); |
| for (row = 0; row < src_bc->uv_height; ++row) { |
| memcpy(dst16, src16, src_bc->uv_width * sizeof(uint16_t)); |
| src16 += src_bc->uv_stride; |
| dst16 += dst_bc->uv_stride; |
| } |
| return; |
| } |
| |
| for (row = 0; row < src_bc->uv_height; ++row) { |
| memcpy(dst, src, src_bc->uv_width); |
| src += src_bc->uv_stride; |
| dst += dst_bc->uv_stride; |
| } |
| } |
| |
| void aom_yv12_partial_copy_y_c(const YV12_BUFFER_CONFIG *src_ybc, |
| YV12_BUFFER_CONFIG *dst_ybc, int hstart, |
| int hend, int vstart, int vend) { |
| int row; |
| const uint8_t *src = src_ybc->y_buffer; |
| uint8_t *dst = dst_ybc->y_buffer; |
| |
| if (src_ybc->flags & YV12_FLAG_HIGHBITDEPTH) { |
| const uint16_t *src16 = |
| CONVERT_TO_SHORTPTR(src + vstart * src_ybc->y_stride + hstart); |
| uint16_t *dst16 = |
| CONVERT_TO_SHORTPTR(dst + vstart * dst_ybc->y_stride + hstart); |
| for (row = vstart; row < vend; ++row) { |
| memcpy(dst16, src16, (hend - hstart) * sizeof(uint16_t)); |
| src16 += src_ybc->y_stride; |
| dst16 += dst_ybc->y_stride; |
| } |
| return; |
| } |
| src = (src + vstart * src_ybc->y_stride + hstart); |
| dst = (dst + vstart * dst_ybc->y_stride + hstart); |
| |
| for (row = vstart; row < vend; ++row) { |
| memcpy(dst, src, (hend - hstart)); |
| src += src_ybc->y_stride; |
| dst += dst_ybc->y_stride; |
| } |
| } |
| |
| void aom_yv12_partial_copy_u_c(const YV12_BUFFER_CONFIG *src_bc, |
| YV12_BUFFER_CONFIG *dst_bc, int hstart, int hend, |
| int vstart, int vend) { |
| int row; |
| const uint8_t *src = src_bc->u_buffer; |
| uint8_t *dst = dst_bc->u_buffer; |
| |
| if (src_bc->flags & YV12_FLAG_HIGHBITDEPTH) { |
| const uint16_t *src16 = |
| CONVERT_TO_SHORTPTR(src + vstart * src_bc->uv_stride + hstart); |
| uint16_t *dst16 = |
| CONVERT_TO_SHORTPTR(dst + vstart * dst_bc->uv_stride + hstart); |
| for (row = vstart; row < vend; ++row) { |
| memcpy(dst16, src16, (hend - hstart) * sizeof(uint16_t)); |
| src16 += src_bc->uv_stride; |
| dst16 += dst_bc->uv_stride; |
| } |
| return; |
| } |
| |
| src = (src + vstart * src_bc->uv_stride + hstart); |
| dst = (dst + vstart * dst_bc->uv_stride + hstart); |
| |
| for (row = vstart; row < vend; ++row) { |
| memcpy(dst, src, (hend - hstart)); |
| src += src_bc->uv_stride; |
| dst += dst_bc->uv_stride; |
| } |
| } |
| |
| void aom_yv12_partial_copy_v_c(const YV12_BUFFER_CONFIG *src_bc, |
| YV12_BUFFER_CONFIG *dst_bc, int hstart, int hend, |
| int vstart, int vend) { |
| int row; |
| const uint8_t *src = src_bc->v_buffer; |
| uint8_t *dst = dst_bc->v_buffer; |
| |
| if (src_bc->flags & YV12_FLAG_HIGHBITDEPTH) { |
| const uint16_t *src16 = |
| CONVERT_TO_SHORTPTR(src + vstart * src_bc->uv_stride + hstart); |
| uint16_t *dst16 = |
| CONVERT_TO_SHORTPTR(dst + vstart * dst_bc->uv_stride + hstart); |
| for (row = vstart; row < vend; ++row) { |
| memcpy(dst16, src16, (hend - hstart) * sizeof(uint16_t)); |
| src16 += src_bc->uv_stride; |
| dst16 += dst_bc->uv_stride; |
| } |
| return; |
| } |
| |
| src = (src + vstart * src_bc->uv_stride + hstart); |
| dst = (dst + vstart * dst_bc->uv_stride + hstart); |
| |
| for (row = vstart; row < vend; ++row) { |
| memcpy(dst, src, (hend - hstart)); |
| src += src_bc->uv_stride; |
| dst += dst_bc->uv_stride; |
| } |
| } |