| /* |
| * Copyright (c) 2010 The WebM project authors. All Rights Reserved. |
| * |
| * Use of this source code is governed by a BSD-style license |
| * that can be found in the LICENSE file in the root of the source |
| * tree. An additional intellectual property rights grant can be found |
| * in the file PATENTS. All contributing project authors may |
| * be found in the AUTHORS file in the root of the source tree. |
| */ |
| |
| #include <math.h> |
| #include "vpx_mem/vpx_mem.h" |
| |
| #include "vp9/encoder/vp9_onyx_int.h" |
| #include "vp9/encoder/vp9_rdopt.h" |
| #include "vp9/encoder/vp9_quantize.h" |
| #include "vp9/common/vp9_quant_common.h" |
| |
| #include "vp9/common/vp9_seg_common.h" |
| |
| #ifdef ENC_DEBUG |
| extern int enc_debug; |
| #endif |
| |
| void vp9_quantize_b_c(int16_t *coeff_ptr, intptr_t n_coeffs, int skip_block, |
| int16_t *zbin_ptr, int16_t *round_ptr, int16_t *quant_ptr, |
| int16_t *quant_shift_ptr, int16_t *qcoeff_ptr, |
| int16_t *dqcoeff_ptr, int16_t *dequant_ptr, |
| int zbin_oq_value, uint16_t *eob_ptr, const int16_t *scan, |
| const int16_t *iscan) { |
| int i, rc, eob; |
| int zbins[2], nzbins[2], zbin; |
| int x, y, z, sz; |
| int zero_flag = n_coeffs; |
| |
| vpx_memset(qcoeff_ptr, 0, n_coeffs*sizeof(int16_t)); |
| vpx_memset(dqcoeff_ptr, 0, n_coeffs*sizeof(int16_t)); |
| |
| eob = -1; |
| |
| // Base ZBIN |
| zbins[0] = zbin_ptr[0] + zbin_oq_value; |
| zbins[1] = zbin_ptr[1] + zbin_oq_value; |
| nzbins[0] = zbins[0] * -1; |
| nzbins[1] = zbins[1] * -1; |
| |
| if (!skip_block) { |
| // Pre-scan pass |
| for (i = n_coeffs - 1; i >= 0; i--) { |
| rc = scan[i]; |
| z = coeff_ptr[rc]; |
| |
| if (z < zbins[rc != 0] && z > nzbins[rc != 0]) { |
| zero_flag--; |
| } else { |
| break; |
| } |
| } |
| |
| // Quantization pass: All coefficients with index >= zero_flag are |
| // skippable. Note: zero_flag can be zero. |
| for (i = 0; i < zero_flag; i++) { |
| rc = scan[i]; |
| z = coeff_ptr[rc]; |
| |
| zbin = (zbins[rc != 0]); |
| |
| sz = (z >> 31); // sign of z |
| x = (z ^ sz) - sz; |
| |
| if (x >= zbin) { |
| x += (round_ptr[rc != 0]); |
| x = clamp(x, INT16_MIN, INT16_MAX); |
| y = (((int)(((int)(x * quant_ptr[rc != 0]) >> 16) + x)) * |
| quant_shift_ptr[rc != 0]) >> 16; // quantize (x) |
| x = (y ^ sz) - sz; // get the sign back |
| qcoeff_ptr[rc] = x; // write to destination |
| dqcoeff_ptr[rc] = x * dequant_ptr[rc != 0]; // dequantized value |
| |
| if (y) { |
| eob = i; // last nonzero coeffs |
| } |
| } |
| } |
| } |
| *eob_ptr = eob + 1; |
| } |
| |
| void vp9_quantize_b_32x32_c(int16_t *coeff_ptr, intptr_t n_coeffs, |
| int skip_block, |
| int16_t *zbin_ptr, int16_t *round_ptr, |
| int16_t *quant_ptr, int16_t *quant_shift_ptr, |
| int16_t *qcoeff_ptr, int16_t *dqcoeff_ptr, |
| int16_t *dequant_ptr, int zbin_oq_value, |
| uint16_t *eob_ptr, const int16_t *scan, |
| const int16_t *iscan) { |
| int i, rc, eob; |
| int zbins[2], nzbins[2]; |
| int x, y, z, sz; |
| int idx = 0; |
| int idx_arr[1024]; |
| |
| vpx_memset(qcoeff_ptr, 0, n_coeffs*sizeof(int16_t)); |
| vpx_memset(dqcoeff_ptr, 0, n_coeffs*sizeof(int16_t)); |
| |
| eob = -1; |
| |
| // Base ZBIN |
| zbins[0] = ROUND_POWER_OF_TWO(zbin_ptr[0] + zbin_oq_value, 1); |
| zbins[1] = ROUND_POWER_OF_TWO(zbin_ptr[1] + zbin_oq_value, 1); |
| nzbins[0] = zbins[0] * -1; |
| nzbins[1] = zbins[1] * -1; |
| |
| if (!skip_block) { |
| // Pre-scan pass |
| for (i = 0; i < n_coeffs; i++) { |
| rc = scan[i]; |
| z = coeff_ptr[rc]; |
| |
| // If the coefficient is out of the base ZBIN range, keep it for |
| // quantization. |
| if (z >= zbins[rc != 0] || z <= nzbins[rc != 0]) |
| idx_arr[idx++] = i; |
| } |
| |
| // Quantization pass: only process the coefficients selected in |
| // pre-scan pass. Note: idx can be zero. |
| for (i = 0; i < idx; i++) { |
| rc = scan[idx_arr[i]]; |
| |
| z = coeff_ptr[rc]; |
| sz = (z >> 31); // sign of z |
| x = (z ^ sz) - sz; // x = abs(z) |
| |
| x += ROUND_POWER_OF_TWO(round_ptr[rc != 0], 1); |
| x = clamp(x, INT16_MIN, INT16_MAX); |
| y = ((((x * quant_ptr[rc != 0]) >> 16) + x) * |
| quant_shift_ptr[rc != 0]) >> 15; // quantize (x) |
| |
| x = (y ^ sz) - sz; // get the sign back |
| qcoeff_ptr[rc] = x; // write to destination |
| dqcoeff_ptr[rc] = x * dequant_ptr[rc != 0] / 2; // dequantized value |
| |
| if (y) |
| eob = idx_arr[i]; // last nonzero coeffs |
| } |
| } |
| *eob_ptr = eob + 1; |
| } |
| |
| struct plane_block_idx { |
| int plane; |
| int block; |
| }; |
| |
| // TODO(jkoleszar): returning a struct so it can be used in a const context, |
| // expect to refactor this further later. |
| static INLINE struct plane_block_idx plane_block_idx(int y_blocks, |
| int b_idx) { |
| const int v_offset = y_blocks * 5 / 4; |
| struct plane_block_idx res; |
| |
| if (b_idx < y_blocks) { |
| res.plane = 0; |
| res.block = b_idx; |
| } else if (b_idx < v_offset) { |
| res.plane = 1; |
| res.block = b_idx - y_blocks; |
| } else { |
| assert(b_idx < y_blocks * 3 / 2); |
| res.plane = 2; |
| res.block = b_idx - v_offset; |
| } |
| return res; |
| } |
| |
| void vp9_regular_quantize_b_4x4(MACROBLOCK *mb, int b_idx, TX_TYPE tx_type, |
| int y_blocks) { |
| MACROBLOCKD *const xd = &mb->e_mbd; |
| const struct plane_block_idx pb_idx = plane_block_idx(y_blocks, b_idx); |
| const int16_t *scan = get_scan_4x4(tx_type); |
| const int16_t *iscan = get_iscan_4x4(tx_type); |
| |
| vp9_quantize_b(BLOCK_OFFSET(mb->plane[pb_idx.plane].coeff, pb_idx.block), |
| 16, mb->skip_block, |
| mb->plane[pb_idx.plane].zbin, |
| mb->plane[pb_idx.plane].round, |
| mb->plane[pb_idx.plane].quant, |
| mb->plane[pb_idx.plane].quant_shift, |
| BLOCK_OFFSET(xd->plane[pb_idx.plane].qcoeff, pb_idx.block), |
| BLOCK_OFFSET(xd->plane[pb_idx.plane].dqcoeff, pb_idx.block), |
| xd->plane[pb_idx.plane].dequant, |
| mb->plane[pb_idx.plane].zbin_extra, |
| &xd->plane[pb_idx.plane].eobs[pb_idx.block], |
| scan, iscan); |
| } |
| |
| static void invert_quant(int16_t *quant, int16_t *shift, int d) { |
| unsigned t; |
| int l; |
| t = d; |
| for (l = 0; t > 1; l++) |
| t >>= 1; |
| t = 1 + (1 << (16 + l)) / d; |
| *quant = (int16_t)(t - (1 << 16)); |
| *shift = 1 << (16 - l); |
| } |
| |
| void vp9_init_quantizer(VP9_COMP *cpi) { |
| int i, q; |
| VP9_COMMON *const cm = &cpi->common; |
| |
| for (q = 0; q < QINDEX_RANGE; q++) { |
| const int qzbin_factor = q == 0 ? 64 : (vp9_dc_quant(q, 0) < 148 ? 84 : 80); |
| const int qrounding_factor = q == 0 ? 64 : 48; |
| |
| // y |
| for (i = 0; i < 2; ++i) { |
| const int quant = i == 0 ? vp9_dc_quant(q, cm->y_dc_delta_q) |
| : vp9_ac_quant(q, 0); |
| invert_quant(&cpi->y_quant[q][i], &cpi->y_quant_shift[q][i], quant); |
| cpi->y_zbin[q][i] = ROUND_POWER_OF_TWO(qzbin_factor * quant, 7); |
| cpi->y_round[q][i] = (qrounding_factor * quant) >> 7; |
| cm->y_dequant[q][i] = quant; |
| } |
| |
| // uv |
| for (i = 0; i < 2; ++i) { |
| const int quant = i == 0 ? vp9_dc_quant(q, cm->uv_dc_delta_q) |
| : vp9_ac_quant(q, cm->uv_ac_delta_q); |
| invert_quant(&cpi->uv_quant[q][i], &cpi->uv_quant_shift[q][i], quant); |
| cpi->uv_zbin[q][i] = ROUND_POWER_OF_TWO(qzbin_factor * quant, 7); |
| cpi->uv_round[q][i] = (qrounding_factor * quant) >> 7; |
| cm->uv_dequant[q][i] = quant; |
| } |
| |
| #if CONFIG_ALPHA |
| // alpha |
| for (i = 0; i < 2; ++i) { |
| const int quant = i == 0 ? vp9_dc_quant(q, cm->a_dc_delta_q) |
| : vp9_ac_quant(q, cm->a_ac_delta_q); |
| invert_quant(&cpi->a_quant[q][i], &cpi->a_quant_shift[q][i], quant); |
| cpi->a_zbin[q][i] = ROUND_POWER_OF_TWO(qzbin_factor * quant, 7); |
| cpi->a_round[q][i] = (qrounding_factor * quant) >> 7; |
| cm->a_dequant[q][i] = quant; |
| } |
| #endif |
| |
| for (i = 2; i < 8; i++) { |
| cpi->y_quant[q][i] = cpi->y_quant[q][1]; |
| cpi->y_quant_shift[q][i] = cpi->y_quant_shift[q][1]; |
| cpi->y_zbin[q][i] = cpi->y_zbin[q][1]; |
| cpi->y_round[q][i] = cpi->y_round[q][1]; |
| cm->y_dequant[q][i] = cm->y_dequant[q][1]; |
| |
| cpi->uv_quant[q][i] = cpi->uv_quant[q][1]; |
| cpi->uv_quant_shift[q][i] = cpi->uv_quant_shift[q][1]; |
| cpi->uv_zbin[q][i] = cpi->uv_zbin[q][1]; |
| cpi->uv_round[q][i] = cpi->uv_round[q][1]; |
| cm->uv_dequant[q][i] = cm->uv_dequant[q][1]; |
| |
| #if CONFIG_ALPHA |
| cpi->a_quant[q][i] = cpi->a_quant[q][1]; |
| cpi->a_quant_shift[q][i] = cpi->a_quant_shift[q][1]; |
| cpi->a_zbin[q][i] = cpi->a_zbin[q][1]; |
| cpi->a_round[q][i] = cpi->a_round[q][1]; |
| cm->a_dequant[q][i] = cm->a_dequant[q][1]; |
| #endif |
| } |
| } |
| } |
| |
| void vp9_mb_init_quantizer(VP9_COMP *cpi, MACROBLOCK *x) { |
| int i; |
| VP9_COMMON *const cm = &cpi->common; |
| MACROBLOCKD *xd = &x->e_mbd; |
| int zbin_extra; |
| int segment_id = xd->this_mi->mbmi.segment_id; |
| const int qindex = vp9_get_qindex(&cpi->common.seg, segment_id, |
| cpi->common.base_qindex); |
| |
| int rdmult = vp9_compute_rd_mult(cpi, qindex + cm->y_dc_delta_q); |
| |
| // Y |
| zbin_extra = (cpi->common.y_dequant[qindex][1] * |
| (cpi->zbin_mode_boost + x->act_zbin_adj)) >> 7; |
| |
| x->plane[0].quant = cpi->y_quant[qindex]; |
| x->plane[0].quant_shift = cpi->y_quant_shift[qindex]; |
| x->plane[0].zbin = cpi->y_zbin[qindex]; |
| x->plane[0].round = cpi->y_round[qindex]; |
| x->plane[0].zbin_extra = (int16_t)zbin_extra; |
| x->e_mbd.plane[0].dequant = cpi->common.y_dequant[qindex]; |
| |
| // UV |
| zbin_extra = (cpi->common.uv_dequant[qindex][1] * |
| (cpi->zbin_mode_boost + x->act_zbin_adj)) >> 7; |
| |
| for (i = 1; i < 3; i++) { |
| x->plane[i].quant = cpi->uv_quant[qindex]; |
| x->plane[i].quant_shift = cpi->uv_quant_shift[qindex]; |
| x->plane[i].zbin = cpi->uv_zbin[qindex]; |
| x->plane[i].round = cpi->uv_round[qindex]; |
| x->plane[i].zbin_extra = (int16_t)zbin_extra; |
| x->e_mbd.plane[i].dequant = cpi->common.uv_dequant[qindex]; |
| } |
| |
| #if CONFIG_ALPHA |
| x->plane[3].quant = cpi->a_quant[qindex]; |
| x->plane[3].quant_shift = cpi->a_quant_shift[qindex]; |
| x->plane[3].zbin = cpi->a_zbin[qindex]; |
| x->plane[3].round = cpi->a_round[qindex]; |
| x->plane[3].zbin_extra = (int16_t)zbin_extra; |
| x->e_mbd.plane[3].dequant = cpi->common.a_dequant[qindex]; |
| #endif |
| |
| x->skip_block = vp9_segfeature_active(&cpi->common.seg, segment_id, |
| SEG_LVL_SKIP); |
| |
| /* save this macroblock QIndex for vp9_update_zbin_extra() */ |
| x->e_mbd.q_index = qindex; |
| |
| /* R/D setup */ |
| cpi->mb.errorperbit = rdmult >> 6; |
| cpi->mb.errorperbit += (cpi->mb.errorperbit == 0); |
| |
| vp9_initialize_me_consts(cpi, xd->q_index); |
| } |
| |
| void vp9_update_zbin_extra(VP9_COMP *cpi, MACROBLOCK *x) { |
| const int qindex = x->e_mbd.q_index; |
| const int y_zbin_extra = (cpi->common.y_dequant[qindex][1] * |
| (cpi->zbin_mode_boost + x->act_zbin_adj)) >> 7; |
| const int uv_zbin_extra = (cpi->common.uv_dequant[qindex][1] * |
| (cpi->zbin_mode_boost + x->act_zbin_adj)) >> 7; |
| |
| x->plane[0].zbin_extra = (int16_t)y_zbin_extra; |
| x->plane[1].zbin_extra = (int16_t)uv_zbin_extra; |
| x->plane[2].zbin_extra = (int16_t)uv_zbin_extra; |
| } |
| |
| void vp9_frame_init_quantizer(VP9_COMP *cpi) { |
| // Clear Zbin mode boost for default case |
| cpi->zbin_mode_boost = 0; |
| |
| // MB level quantizer setup |
| vp9_mb_init_quantizer(cpi, &cpi->mb); |
| } |
| |
| void vp9_set_quantizer(struct VP9_COMP *cpi, int q) { |
| VP9_COMMON *cm = &cpi->common; |
| |
| cm->base_qindex = q; |
| |
| // if any of the delta_q values are changing update flag will |
| // have to be set. |
| cm->y_dc_delta_q = 0; |
| cm->uv_dc_delta_q = 0; |
| cm->uv_ac_delta_q = 0; |
| |
| // quantizer has to be reinitialized if any delta_q changes. |
| // As there are not any here for now this is inactive code. |
| // if(update) |
| // vp9_init_quantizer(cpi); |
| } |