| /* | |
| * Copyright (c) 2013 The WebM project authors. All Rights Reserved. | |
| * | |
| * Use of this source code is governed by a BSD-style license | |
| * that can be found in the LICENSE file in the root of the source | |
| * tree. An additional intellectual property rights grant can be found | |
| * in the file PATENTS. All contributing project authors may | |
| * be found in the AUTHORS file in the root of the source tree. | |
| */ | |
| #include "third_party/googletest/src/include/gtest/gtest.h" | |
| #include "test/codec_factory.h" | |
| #include "test/encode_test_driver.h" | |
| #include "test/i420_video_source.h" | |
| #include "test/util.h" | |
| namespace { | |
| const int kMaxErrorFrames = 12; | |
| const int kMaxDroppableFrames = 12; | |
| class ErrorResilienceTestLarge : public ::libvpx_test::EncoderTest, | |
| public ::libvpx_test::CodecTestWith2Params<libvpx_test::TestMode, bool> { | |
| protected: | |
| ErrorResilienceTestLarge() | |
| : EncoderTest(GET_PARAM(0)), | |
| svc_support_(GET_PARAM(2)), | |
| psnr_(0.0), | |
| nframes_(0), | |
| mismatch_psnr_(0.0), | |
| mismatch_nframes_(0), | |
| encoding_mode_(GET_PARAM(1)) { | |
| Reset(); | |
| } | |
| virtual ~ErrorResilienceTestLarge() {} | |
| void Reset() { | |
| error_nframes_ = 0; | |
| droppable_nframes_ = 0; | |
| pattern_switch_ = 0; | |
| } | |
| virtual void SetUp() { | |
| InitializeConfig(); | |
| SetMode(encoding_mode_); | |
| } | |
| virtual void BeginPassHook(unsigned int /*pass*/) { | |
| psnr_ = 0.0; | |
| nframes_ = 0; | |
| mismatch_psnr_ = 0.0; | |
| mismatch_nframes_ = 0; | |
| } | |
| virtual void PSNRPktHook(const vpx_codec_cx_pkt_t *pkt) { | |
| psnr_ += pkt->data.psnr.psnr[0]; | |
| nframes_++; | |
| } | |
| // | |
| // Frame flags and layer id for temporal layers. | |
| // For two layers, test pattern is: | |
| // 1 3 | |
| // 0 2 ..... | |
| // LAST is updated on base/layer 0, GOLDEN updated on layer 1. | |
| // Non-zero pattern_switch parameter means pattern will switch to | |
| // not using LAST for frame_num >= pattern_switch. | |
| int SetFrameFlags(int frame_num, | |
| int num_temp_layers, | |
| int pattern_switch) { | |
| int frame_flags = 0; | |
| if (num_temp_layers == 2) { | |
| if (frame_num % 2 == 0) { | |
| if (frame_num < pattern_switch || pattern_switch == 0) { | |
| // Layer 0: predict from LAST and ARF, update LAST. | |
| frame_flags = VP8_EFLAG_NO_REF_GF | | |
| VP8_EFLAG_NO_UPD_GF | | |
| VP8_EFLAG_NO_UPD_ARF; | |
| } else { | |
| // Layer 0: predict from GF and ARF, update GF. | |
| frame_flags = VP8_EFLAG_NO_REF_LAST | | |
| VP8_EFLAG_NO_UPD_LAST | | |
| VP8_EFLAG_NO_UPD_ARF; | |
| } | |
| } else { | |
| if (frame_num < pattern_switch || pattern_switch == 0) { | |
| // Layer 1: predict from L, GF, and ARF, update GF. | |
| frame_flags = VP8_EFLAG_NO_UPD_ARF | | |
| VP8_EFLAG_NO_UPD_LAST; | |
| } else { | |
| // Layer 1: predict from GF and ARF, update GF. | |
| frame_flags = VP8_EFLAG_NO_REF_LAST | | |
| VP8_EFLAG_NO_UPD_LAST | | |
| VP8_EFLAG_NO_UPD_ARF; | |
| } | |
| } | |
| } | |
| return frame_flags; | |
| } | |
| virtual void PreEncodeFrameHook(libvpx_test::VideoSource *video, | |
| ::libvpx_test::Encoder * /*encoder*/) { | |
| frame_flags_ &= ~(VP8_EFLAG_NO_UPD_LAST | | |
| VP8_EFLAG_NO_UPD_GF | | |
| VP8_EFLAG_NO_UPD_ARF); | |
| // For temporal layer case. | |
| if (cfg_.ts_number_layers > 1) { | |
| frame_flags_ = SetFrameFlags(video->frame(), | |
| cfg_.ts_number_layers, | |
| pattern_switch_); | |
| for (unsigned int i = 0; i < droppable_nframes_; ++i) { | |
| if (droppable_frames_[i] == video->frame()) { | |
| std::cout << "Encoding droppable frame: " | |
| << droppable_frames_[i] << "\n"; | |
| } | |
| } | |
| } else { | |
| if (droppable_nframes_ > 0 && | |
| (cfg_.g_pass == VPX_RC_LAST_PASS || cfg_.g_pass == VPX_RC_ONE_PASS)) { | |
| for (unsigned int i = 0; i < droppable_nframes_; ++i) { | |
| if (droppable_frames_[i] == video->frame()) { | |
| std::cout << "Encoding droppable frame: " | |
| << droppable_frames_[i] << "\n"; | |
| frame_flags_ |= (VP8_EFLAG_NO_UPD_LAST | | |
| VP8_EFLAG_NO_UPD_GF | | |
| VP8_EFLAG_NO_UPD_ARF); | |
| return; | |
| } | |
| } | |
| } | |
| } | |
| } | |
| double GetAveragePsnr() const { | |
| if (nframes_) | |
| return psnr_ / nframes_; | |
| return 0.0; | |
| } | |
| double GetAverageMismatchPsnr() const { | |
| if (mismatch_nframes_) | |
| return mismatch_psnr_ / mismatch_nframes_; | |
| return 0.0; | |
| } | |
| virtual bool DoDecode() const { | |
| if (error_nframes_ > 0 && | |
| (cfg_.g_pass == VPX_RC_LAST_PASS || cfg_.g_pass == VPX_RC_ONE_PASS)) { | |
| for (unsigned int i = 0; i < error_nframes_; ++i) { | |
| if (error_frames_[i] == nframes_ - 1) { | |
| std::cout << " Skipping decoding frame: " | |
| << error_frames_[i] << "\n"; | |
| return 0; | |
| } | |
| } | |
| } | |
| return 1; | |
| } | |
| virtual void MismatchHook(const vpx_image_t *img1, | |
| const vpx_image_t *img2) { | |
| double mismatch_psnr = compute_psnr(img1, img2); | |
| mismatch_psnr_ += mismatch_psnr; | |
| ++mismatch_nframes_; | |
| // std::cout << "Mismatch frame psnr: " << mismatch_psnr << "\n"; | |
| } | |
| void SetErrorFrames(int num, unsigned int *list) { | |
| if (num > kMaxErrorFrames) | |
| num = kMaxErrorFrames; | |
| else if (num < 0) | |
| num = 0; | |
| error_nframes_ = num; | |
| for (unsigned int i = 0; i < error_nframes_; ++i) | |
| error_frames_[i] = list[i]; | |
| } | |
| void SetDroppableFrames(int num, unsigned int *list) { | |
| if (num > kMaxDroppableFrames) | |
| num = kMaxDroppableFrames; | |
| else if (num < 0) | |
| num = 0; | |
| droppable_nframes_ = num; | |
| for (unsigned int i = 0; i < droppable_nframes_; ++i) | |
| droppable_frames_[i] = list[i]; | |
| } | |
| unsigned int GetMismatchFrames() { | |
| return mismatch_nframes_; | |
| } | |
| void SetPatternSwitch(int frame_switch) { | |
| pattern_switch_ = frame_switch; | |
| } | |
| bool svc_support_; | |
| private: | |
| double psnr_; | |
| unsigned int nframes_; | |
| unsigned int error_nframes_; | |
| unsigned int droppable_nframes_; | |
| unsigned int pattern_switch_; | |
| double mismatch_psnr_; | |
| unsigned int mismatch_nframes_; | |
| unsigned int error_frames_[kMaxErrorFrames]; | |
| unsigned int droppable_frames_[kMaxDroppableFrames]; | |
| libvpx_test::TestMode encoding_mode_; | |
| }; | |
| TEST_P(ErrorResilienceTestLarge, OnVersusOff) { | |
| const vpx_rational timebase = { 33333333, 1000000000 }; | |
| cfg_.g_timebase = timebase; | |
| cfg_.rc_target_bitrate = 2000; | |
| cfg_.g_lag_in_frames = 10; | |
| init_flags_ = VPX_CODEC_USE_PSNR; | |
| libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288, | |
| timebase.den, timebase.num, 0, 30); | |
| // Error resilient mode OFF. | |
| cfg_.g_error_resilient = 0; | |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); | |
| const double psnr_resilience_off = GetAveragePsnr(); | |
| EXPECT_GT(psnr_resilience_off, 25.0); | |
| // Error resilient mode ON. | |
| cfg_.g_error_resilient = 1; | |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); | |
| const double psnr_resilience_on = GetAveragePsnr(); | |
| EXPECT_GT(psnr_resilience_on, 25.0); | |
| // Test that turning on error resilient mode hurts by 10% at most. | |
| if (psnr_resilience_off > 0.0) { | |
| const double psnr_ratio = psnr_resilience_on / psnr_resilience_off; | |
| EXPECT_GE(psnr_ratio, 0.9); | |
| EXPECT_LE(psnr_ratio, 1.1); | |
| } | |
| } | |
| // Check for successful decoding and no encoder/decoder mismatch | |
| // if we lose (i.e., drop before decoding) a set of droppable | |
| // frames (i.e., frames that don't update any reference buffers). | |
| // Check both isolated and consecutive loss. | |
| TEST_P(ErrorResilienceTestLarge, DropFramesWithoutRecovery) { | |
| const vpx_rational timebase = { 33333333, 1000000000 }; | |
| cfg_.g_timebase = timebase; | |
| cfg_.rc_target_bitrate = 500; | |
| // FIXME(debargha): Fix this to work for any lag. | |
| // Currently this test only works for lag = 0 | |
| cfg_.g_lag_in_frames = 0; | |
| init_flags_ = VPX_CODEC_USE_PSNR; | |
| libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288, | |
| timebase.den, timebase.num, 0, 40); | |
| // Error resilient mode ON. | |
| cfg_.g_error_resilient = 1; | |
| cfg_.kf_mode = VPX_KF_DISABLED; | |
| // Set an arbitrary set of error frames same as droppable frames. | |
| // In addition to isolated loss/drop, add a long consecutive series | |
| // (of size 9) of dropped frames. | |
| unsigned int num_droppable_frames = 11; | |
| unsigned int droppable_frame_list[] = {5, 16, 22, 23, 24, 25, 26, 27, 28, | |
| 29, 30}; | |
| SetDroppableFrames(num_droppable_frames, droppable_frame_list); | |
| SetErrorFrames(num_droppable_frames, droppable_frame_list); | |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); | |
| // Test that no mismatches have been found | |
| std::cout << " Mismatch frames: " | |
| << GetMismatchFrames() << "\n"; | |
| EXPECT_EQ(GetMismatchFrames(), (unsigned int) 0); | |
| // Reset previously set of error/droppable frames. | |
| Reset(); | |
| #if 0 | |
| // TODO(jkoleszar): This test is disabled for the time being as too | |
| // sensitive. It's not clear how to set a reasonable threshold for | |
| // this behavior. | |
| // Now set an arbitrary set of error frames that are non-droppable | |
| unsigned int num_error_frames = 3; | |
| unsigned int error_frame_list[] = {3, 10, 20}; | |
| SetErrorFrames(num_error_frames, error_frame_list); | |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); | |
| // Test that dropping an arbitrary set of inter frames does not hurt too much | |
| // Note the Average Mismatch PSNR is the average of the PSNR between | |
| // decoded frame and encoder's version of the same frame for all frames | |
| // with mismatch. | |
| const double psnr_resilience_mismatch = GetAverageMismatchPsnr(); | |
| std::cout << " Mismatch PSNR: " | |
| << psnr_resilience_mismatch << "\n"; | |
| EXPECT_GT(psnr_resilience_mismatch, 20.0); | |
| #endif | |
| } | |
| // Check for successful decoding and no encoder/decoder mismatch | |
| // if we lose (i.e., drop before decoding) the enhancement layer frames for a | |
| // two layer temporal pattern. The base layer does not predict from the top | |
| // layer, so successful decoding is expected. | |
| TEST_P(ErrorResilienceTestLarge, 2LayersDropEnhancement) { | |
| // This test doesn't run if SVC is not supported. | |
| if (!svc_support_) | |
| return; | |
| const vpx_rational timebase = { 33333333, 1000000000 }; | |
| cfg_.g_timebase = timebase; | |
| cfg_.rc_target_bitrate = 500; | |
| cfg_.g_lag_in_frames = 0; | |
| cfg_.rc_end_usage = VPX_CBR; | |
| // 2 Temporal layers, no spatial layers, CBR mode. | |
| cfg_.ss_number_layers = 1; | |
| cfg_.ts_number_layers = 2; | |
| cfg_.ts_rate_decimator[0] = 2; | |
| cfg_.ts_rate_decimator[1] = 1; | |
| cfg_.ts_periodicity = 2; | |
| cfg_.ts_target_bitrate[0] = 60 * cfg_.rc_target_bitrate / 100; | |
| cfg_.ts_target_bitrate[1] = cfg_.rc_target_bitrate; | |
| init_flags_ = VPX_CODEC_USE_PSNR; | |
| libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288, | |
| timebase.den, timebase.num, 0, 40); | |
| // Error resilient mode ON. | |
| cfg_.g_error_resilient = 1; | |
| cfg_.kf_mode = VPX_KF_DISABLED; | |
| SetPatternSwitch(0); | |
| // The odd frames are the enhancement layer for 2 layer pattern, so set | |
| // those frames as droppable. Drop the last 7 frames. | |
| unsigned int num_droppable_frames = 7; | |
| unsigned int droppable_frame_list[] = {27, 29, 31, 33, 35, 37, 39}; | |
| SetDroppableFrames(num_droppable_frames, droppable_frame_list); | |
| SetErrorFrames(num_droppable_frames, droppable_frame_list); | |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); | |
| // Test that no mismatches have been found | |
| std::cout << " Mismatch frames: " | |
| << GetMismatchFrames() << "\n"; | |
| EXPECT_EQ(GetMismatchFrames(), (unsigned int) 0); | |
| // Reset previously set of error/droppable frames. | |
| Reset(); | |
| } | |
| // Check for successful decoding and no encoder/decoder mismatch | |
| // for a two layer temporal pattern, where at some point in the | |
| // sequence, the LAST ref is not used anymore. | |
| TEST_P(ErrorResilienceTestLarge, 2LayersNoRefLast) { | |
| // This test doesn't run if SVC is not supported. | |
| if (!svc_support_) | |
| return; | |
| const vpx_rational timebase = { 33333333, 1000000000 }; | |
| cfg_.g_timebase = timebase; | |
| cfg_.rc_target_bitrate = 500; | |
| cfg_.g_lag_in_frames = 0; | |
| cfg_.rc_end_usage = VPX_CBR; | |
| // 2 Temporal layers, no spatial layers, CBR mode. | |
| cfg_.ss_number_layers = 1; | |
| cfg_.ts_number_layers = 2; | |
| cfg_.ts_rate_decimator[0] = 2; | |
| cfg_.ts_rate_decimator[1] = 1; | |
| cfg_.ts_periodicity = 2; | |
| cfg_.ts_target_bitrate[0] = 60 * cfg_.rc_target_bitrate / 100; | |
| cfg_.ts_target_bitrate[1] = cfg_.rc_target_bitrate; | |
| init_flags_ = VPX_CODEC_USE_PSNR; | |
| libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288, | |
| timebase.den, timebase.num, 0, 100); | |
| // Error resilient mode ON. | |
| cfg_.g_error_resilient = 1; | |
| cfg_.kf_mode = VPX_KF_DISABLED; | |
| SetPatternSwitch(60); | |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); | |
| // Test that no mismatches have been found | |
| std::cout << " Mismatch frames: " | |
| << GetMismatchFrames() << "\n"; | |
| EXPECT_EQ(GetMismatchFrames(), (unsigned int) 0); | |
| // Reset previously set of error/droppable frames. | |
| Reset(); | |
| } | |
| class ErrorResilienceTestLargeCodecControls : public ::libvpx_test::EncoderTest, | |
| public ::libvpx_test::CodecTestWithParam<libvpx_test::TestMode> { | |
| protected: | |
| ErrorResilienceTestLargeCodecControls() | |
| : EncoderTest(GET_PARAM(0)), | |
| encoding_mode_(GET_PARAM(1)) { | |
| Reset(); | |
| } | |
| virtual ~ErrorResilienceTestLargeCodecControls() {} | |
| void Reset() { | |
| last_pts_ = 0; | |
| tot_frame_number_ = 0; | |
| // For testing up to 3 layers. | |
| for (int i = 0; i < 3; ++i) { | |
| bits_total_[i] = 0; | |
| } | |
| duration_ = 0.0; | |
| } | |
| virtual void SetUp() { | |
| InitializeConfig(); | |
| SetMode(encoding_mode_); | |
| } | |
| // | |
| // Frame flags and layer id for temporal layers. | |
| // | |
| // For two layers, test pattern is: | |
| // 1 3 | |
| // 0 2 ..... | |
| // For three layers, test pattern is: | |
| // 1 3 5 7 | |
| // 2 6 | |
| // 0 4 .... | |
| // LAST is always update on base/layer 0, GOLDEN is updated on layer 1, | |
| // and ALTREF is updated on top layer for 3 layer pattern. | |
| int SetFrameFlags(int frame_num, int num_temp_layers) { | |
| int frame_flags = 0; | |
| if (num_temp_layers == 2) { | |
| if (frame_num % 2 == 0) { | |
| // Layer 0: predict from L and ARF, update L. | |
| frame_flags = VP8_EFLAG_NO_REF_GF | VP8_EFLAG_NO_UPD_GF | | |
| VP8_EFLAG_NO_UPD_ARF; | |
| } else { | |
| // Layer 1: predict from L, G and ARF, and update G. | |
| frame_flags = VP8_EFLAG_NO_UPD_ARF | VP8_EFLAG_NO_UPD_LAST | | |
| VP8_EFLAG_NO_UPD_ENTROPY; | |
| } | |
| } else if (num_temp_layers == 3) { | |
| if (frame_num % 4 == 0) { | |
| // Layer 0: predict from L, update L. | |
| frame_flags = VP8_EFLAG_NO_UPD_GF | VP8_EFLAG_NO_UPD_ARF | | |
| VP8_EFLAG_NO_REF_GF | VP8_EFLAG_NO_REF_ARF; | |
| } else if ((frame_num - 2) % 4 == 0) { | |
| // Layer 1: predict from L, G, update G. | |
| frame_flags = VP8_EFLAG_NO_UPD_ARF | VP8_EFLAG_NO_UPD_LAST | | |
| VP8_EFLAG_NO_REF_ARF; | |
| } else if ((frame_num - 1) % 2 == 0) { | |
| // Layer 2: predict from L, G, ARF; update ARG. | |
| frame_flags = VP8_EFLAG_NO_UPD_GF | VP8_EFLAG_NO_UPD_LAST; | |
| } | |
| } | |
| return frame_flags; | |
| } | |
| int SetLayerId(int frame_num, int num_temp_layers) { | |
| int layer_id = 0; | |
| if (num_temp_layers == 2) { | |
| if (frame_num % 2 == 0) { | |
| layer_id = 0; | |
| } else { | |
| layer_id = 1; | |
| } | |
| } else if (num_temp_layers == 3) { | |
| if (frame_num % 4 == 0) { | |
| layer_id = 0; | |
| } else if ((frame_num - 2) % 4 == 0) { | |
| layer_id = 1; | |
| } else if ((frame_num - 1) % 2 == 0) { | |
| layer_id = 2; | |
| } | |
| } | |
| return layer_id; | |
| } | |
| virtual void PreEncodeFrameHook(libvpx_test::VideoSource *video, | |
| libvpx_test::Encoder *encoder) { | |
| if (cfg_.ts_number_layers > 1) { | |
| int layer_id = SetLayerId(video->frame(), cfg_.ts_number_layers); | |
| int frame_flags = SetFrameFlags(video->frame(), cfg_.ts_number_layers); | |
| if (video->frame() > 0) { | |
| encoder->Control(VP8E_SET_TEMPORAL_LAYER_ID, layer_id); | |
| encoder->Control(VP8E_SET_FRAME_FLAGS, frame_flags); | |
| } | |
| const vpx_rational_t tb = video->timebase(); | |
| timebase_ = static_cast<double>(tb.num) / tb.den; | |
| duration_ = 0; | |
| return; | |
| } | |
| } | |
| virtual void FramePktHook(const vpx_codec_cx_pkt_t *pkt) { | |
| // Time since last timestamp = duration. | |
| vpx_codec_pts_t duration = pkt->data.frame.pts - last_pts_; | |
| if (duration > 1) { | |
| // Update counter for total number of frames (#frames input to encoder). | |
| // Needed for setting the proper layer_id below. | |
| tot_frame_number_ += static_cast<int>(duration - 1); | |
| } | |
| int layer = SetLayerId(tot_frame_number_, cfg_.ts_number_layers); | |
| const size_t frame_size_in_bits = pkt->data.frame.sz * 8; | |
| // Update the total encoded bits. For temporal layers, update the cumulative | |
| // encoded bits per layer. | |
| for (int i = layer; i < static_cast<int>(cfg_.ts_number_layers); ++i) { | |
| bits_total_[i] += frame_size_in_bits; | |
| } | |
| // Update the most recent pts. | |
| last_pts_ = pkt->data.frame.pts; | |
| ++tot_frame_number_; | |
| } | |
| virtual void EndPassHook(void) { | |
| duration_ = (last_pts_ + 1) * timebase_; | |
| if (cfg_.ts_number_layers > 1) { | |
| for (int layer = 0; layer < static_cast<int>(cfg_.ts_number_layers); | |
| ++layer) { | |
| if (bits_total_[layer]) { | |
| // Effective file datarate: | |
| effective_datarate_[layer] = (bits_total_[layer] / 1000.0) / duration_; | |
| } | |
| } | |
| } | |
| } | |
| double effective_datarate_[3]; | |
| private: | |
| libvpx_test::TestMode encoding_mode_; | |
| vpx_codec_pts_t last_pts_; | |
| double timebase_; | |
| int64_t bits_total_[3]; | |
| double duration_; | |
| int tot_frame_number_; | |
| }; | |
| // Check two codec controls used for: | |
| // (1) for setting temporal layer id, and (2) for settings encoder flags. | |
| // This test invokes those controls for each frame, and verifies encoder/decoder | |
| // mismatch and basic rate control response. | |
| // TODO(marpan): Maybe move this test to datarate_test.cc. | |
| TEST_P(ErrorResilienceTestLargeCodecControls, CodecControl3TemporalLayers) { | |
| cfg_.rc_buf_initial_sz = 500; | |
| cfg_.rc_buf_optimal_sz = 500; | |
| cfg_.rc_buf_sz = 1000; | |
| cfg_.rc_dropframe_thresh = 1; | |
| cfg_.rc_min_quantizer = 2; | |
| cfg_.rc_max_quantizer = 56; | |
| cfg_.rc_end_usage = VPX_CBR; | |
| cfg_.rc_dropframe_thresh = 1; | |
| cfg_.g_lag_in_frames = 0; | |
| cfg_.kf_mode = VPX_KF_DISABLED; | |
| cfg_.g_error_resilient = 1; | |
| // 3 Temporal layers. Framerate decimation (4, 2, 1). | |
| cfg_.ts_number_layers = 3; | |
| cfg_.ts_rate_decimator[0] = 4; | |
| cfg_.ts_rate_decimator[1] = 2; | |
| cfg_.ts_rate_decimator[2] = 1; | |
| cfg_.ts_periodicity = 4; | |
| cfg_.ts_layer_id[0] = 0; | |
| cfg_.ts_layer_id[1] = 2; | |
| cfg_.ts_layer_id[2] = 1; | |
| cfg_.ts_layer_id[3] = 2; | |
| ::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288, | |
| 30, 1, 0, 200); | |
| for (int i = 200; i <= 800; i += 200) { | |
| cfg_.rc_target_bitrate = i; | |
| Reset(); | |
| // 40-20-40 bitrate allocation for 3 temporal layers. | |
| cfg_.ts_target_bitrate[0] = 40 * cfg_.rc_target_bitrate / 100; | |
| cfg_.ts_target_bitrate[1] = 60 * cfg_.rc_target_bitrate / 100; | |
| cfg_.ts_target_bitrate[2] = cfg_.rc_target_bitrate; | |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); | |
| for (int j = 0; j < static_cast<int>(cfg_.ts_number_layers); ++j) { | |
| ASSERT_GE(effective_datarate_[j], cfg_.ts_target_bitrate[j] * 0.75) | |
| << " The datarate for the file is lower than target by too much, " | |
| "for layer: " << j; | |
| ASSERT_LE(effective_datarate_[j], cfg_.ts_target_bitrate[j] * 1.25) | |
| << " The datarate for the file is greater than target by too much, " | |
| "for layer: " << j; | |
| } | |
| } | |
| } | |
| VP8_INSTANTIATE_TEST_CASE(ErrorResilienceTestLarge, ONE_PASS_TEST_MODES, | |
| ::testing::Values(true)); | |
| VP8_INSTANTIATE_TEST_CASE(ErrorResilienceTestLargeCodecControls, | |
| ONE_PASS_TEST_MODES); | |
| VP9_INSTANTIATE_TEST_CASE(ErrorResilienceTestLarge, ONE_PASS_TEST_MODES, | |
| ::testing::Values(true)); | |
| // SVC-related tests don't run for VP10 since SVC is not supported. | |
| VP10_INSTANTIATE_TEST_CASE(ErrorResilienceTestLarge, ONE_PASS_TEST_MODES, | |
| ::testing::Values(false)); | |
| } // namespace |