| /* |
| * Copyright (c) 2016, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 2 Clause License and |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License |
| * was not distributed with this source code in the LICENSE file, you can |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open |
| * Media Patent License 1.0 was not distributed with this source code in the |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. |
| */ |
| #ifndef AV1_COMMON_MVREF_COMMON_H_ |
| #define AV1_COMMON_MVREF_COMMON_H_ |
| |
| #include "av1/common/onyxc_int.h" |
| #include "av1/common/blockd.h" |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #define MVREF_NEIGHBOURS 9 |
| #define MVREF_ROWS 3 |
| #define MVREF_COLS 4 |
| |
| typedef struct position { |
| int row; |
| int col; |
| } POSITION; |
| |
| typedef enum { |
| BOTH_ZERO = 0, |
| ZERO_PLUS_PREDICTED = 1, |
| BOTH_PREDICTED = 2, |
| NEW_PLUS_NON_INTRA = 3, |
| BOTH_NEW = 4, |
| INTRA_PLUS_NON_INTRA = 5, |
| BOTH_INTRA = 6, |
| INVALID_CASE = 9 |
| } motion_vector_context; |
| |
| // This is used to figure out a context for the ref blocks. The code flattens |
| // an array that would have 3 possible counts (0, 1 & 2) for 3 choices by |
| // adding 9 for each intra block, 3 for each zero mv and 1 for each new |
| // motion vector. This single number is then converted into a context |
| // with a single lookup ( counter_to_context ). |
| static const int mode_2_counter[] = { |
| 9, // DC_PRED |
| 9, // V_PRED |
| 9, // H_PRED |
| 9, // D45_PRED |
| 9, // D135_PRED |
| 9, // D117_PRED |
| 9, // D153_PRED |
| 9, // D207_PRED |
| 9, // D63_PRED |
| 9, // SMOOTH_PRED |
| 9, // SMOOTH_V_PRED |
| 9, // SMOOTH_H_PRED |
| 9, // PAETH_PRED |
| 0, // NEARESTMV |
| 0, // NEARMV |
| 3, // GLOBALMV |
| 1, // NEWMV |
| 0, // NEAREST_NEARESTMV |
| 0, // NEAR_NEARMV |
| 1, // NEAREST_NEWMV |
| 1, // NEW_NEARESTMV |
| 1, // NEAR_NEWMV |
| 1, // NEW_NEARMV |
| 3, // GLOBAL_GLOBALMV |
| 1, // NEW_NEWMV |
| }; |
| |
| // There are 3^3 different combinations of 3 counts that can be either 0,1 or |
| // 2. However the actual count can never be greater than 2 so the highest |
| // counter we need is 18. 9 is an invalid counter that's never used. |
| static const int counter_to_context[19] = { |
| BOTH_PREDICTED, // 0 |
| NEW_PLUS_NON_INTRA, // 1 |
| BOTH_NEW, // 2 |
| ZERO_PLUS_PREDICTED, // 3 |
| NEW_PLUS_NON_INTRA, // 4 |
| INVALID_CASE, // 5 |
| BOTH_ZERO, // 6 |
| INVALID_CASE, // 7 |
| INVALID_CASE, // 8 |
| INTRA_PLUS_NON_INTRA, // 9 |
| INTRA_PLUS_NON_INTRA, // 10 |
| INVALID_CASE, // 11 |
| INTRA_PLUS_NON_INTRA, // 12 |
| INVALID_CASE, // 13 |
| INVALID_CASE, // 14 |
| INVALID_CASE, // 15 |
| INVALID_CASE, // 16 |
| INVALID_CASE, // 17 |
| BOTH_INTRA // 18 |
| }; |
| |
| static const int idx_n_column_to_subblock[4][2] = { |
| { 1, 2 }, { 1, 3 }, { 3, 2 }, { 3, 3 } |
| }; |
| |
| // clamp_mv_ref |
| #if CONFIG_EXT_PARTITION |
| #define MV_BORDER (16 << 3) // Allow 16 pels in 1/8th pel units |
| #else |
| #define MV_BORDER (8 << 3) // Allow 8 pels in 1/8th pel units |
| #endif // CONFIG_EXT_PARTITION |
| |
| #if CONFIG_FRAME_MARKER |
| // Get the number of frames between the current frame and a reference frame |
| static INLINE int get_ref_frame_dist(const AV1_COMMON *cm, |
| MV_REFERENCE_FRAME ref) { |
| // get the offset between the key frame and the current frame |
| const int cur_frame_offset = cm->frame_offset; |
| // get the offset between the key frame and the reference frame |
| const int ref_buf_idx = cm->frame_refs[ref - LAST_FRAME].idx; |
| if (ref_buf_idx == INVALID_IDX) return INT_MAX; |
| const int ref_frame_offset = |
| cm->buffer_pool->frame_bufs[ref_buf_idx].cur_frame_offset; |
| return cur_frame_offset - ref_frame_offset; |
| } |
| #endif // CONFIG_FRAME_MARKER |
| |
| static INLINE void clamp_mv_ref(MV *mv, int bw, int bh, const MACROBLOCKD *xd) { |
| clamp_mv(mv, xd->mb_to_left_edge - bw * 8 - MV_BORDER, |
| xd->mb_to_right_edge + bw * 8 + MV_BORDER, |
| xd->mb_to_top_edge - bh * 8 - MV_BORDER, |
| xd->mb_to_bottom_edge + bh * 8 + MV_BORDER); |
| } |
| |
| // This function returns either the appropriate sub block or block's mv |
| // on whether the block_size < 8x8 and we have check_sub_blocks set. |
| static INLINE int_mv get_sub_block_mv(const MODE_INFO *candidate, int which_mv, |
| int search_col) { |
| (void)search_col; |
| return candidate->mbmi.mv[which_mv]; |
| } |
| |
| static INLINE int_mv get_sub_block_pred_mv(const MODE_INFO *candidate, |
| int which_mv, int search_col) { |
| (void)search_col; |
| return candidate->mbmi.mv[which_mv]; |
| } |
| |
| // Performs mv sign inversion if indicated by the reference frame combination. |
| static INLINE int_mv scale_mv(const MB_MODE_INFO *mbmi, int ref, |
| const MV_REFERENCE_FRAME this_ref_frame, |
| const int *ref_sign_bias) { |
| int_mv mv = mbmi->mv[ref]; |
| if (ref_sign_bias[mbmi->ref_frame[ref]] != ref_sign_bias[this_ref_frame]) { |
| mv.as_mv.row *= -1; |
| mv.as_mv.col *= -1; |
| } |
| return mv; |
| } |
| |
| #define CLIP_IN_ADD(mv, bw, bh, xd) clamp_mv_ref(mv, bw, bh, xd) |
| |
| // This macro is used to add a motion vector mv_ref list if it isn't |
| // already in the list. If it's the second motion vector it will also |
| // skip all additional processing and jump to done! |
| #define ADD_MV_REF_LIST(mv, refmv_count, mv_ref_list, bw, bh, xd, Done) \ |
| do { \ |
| (mv_ref_list)[(refmv_count)] = (mv); \ |
| CLIP_IN_ADD(&(mv_ref_list)[(refmv_count)].as_mv, (bw), (bh), (xd)); \ |
| if (refmv_count && (mv_ref_list)[1].as_int != (mv_ref_list)[0].as_int) { \ |
| (refmv_count) = 2; \ |
| goto Done; \ |
| } \ |
| (refmv_count) = 1; \ |
| } while (0) |
| |
| // If either reference frame is different, not INTRA, and they |
| // are different from each other scale and add the mv to our list. |
| #define IF_DIFF_REF_FRAME_ADD_MV(mbmi, ref_frame, ref_sign_bias, refmv_count, \ |
| mv_ref_list, bw, bh, xd, Done) \ |
| do { \ |
| if (is_inter_block(mbmi)) { \ |
| if ((mbmi)->ref_frame[0] != ref_frame) \ |
| ADD_MV_REF_LIST(scale_mv((mbmi), 0, ref_frame, ref_sign_bias), \ |
| refmv_count, mv_ref_list, bw, bh, xd, Done); \ |
| if (has_second_ref(mbmi) && (mbmi)->ref_frame[1] != ref_frame) \ |
| ADD_MV_REF_LIST(scale_mv((mbmi), 1, ref_frame, ref_sign_bias), \ |
| refmv_count, mv_ref_list, bw, bh, xd, Done); \ |
| } \ |
| } while (0) |
| |
| #if CONFIG_EXT_SKIP |
| // This macro is used to add a motion vector pair to the skip mode mv list. |
| #define SKIP_MODE_MV_LIST_ADD(mv, mv_list, mv_list_count, mv_list_idx, bw, bh, \ |
| xd) \ |
| do { \ |
| const int mv_idx = (mv_list_count)[mv_list_idx]; \ |
| (mv_list)[mv_list_idx][mv_idx][0] = (mv)[0]; \ |
| CLIP_IN_ADD(&(mv_list)[mv_list_idx][mv_idx][0].as_mv, (bw), (bh), (xd)); \ |
| if (mv_list_idx == 2) { \ |
| (mv_list)[mv_list_idx][mv_idx][1] = (mv)[1]; \ |
| CLIP_IN_ADD(&(mv_list)[mv_list_idx][mv_idx][1].as_mv, (bw), (bh), (xd)); \ |
| } \ |
| (mv_list_count)[mv_list_idx]++; \ |
| } while (0) |
| #endif // CONFIG_EXT_SKIP |
| |
| // Checks that the given mi_row, mi_col and search point |
| // are inside the borders of the tile. |
| static INLINE int is_inside(const TileInfo *const tile, int mi_col, int mi_row, |
| int mi_rows, const AV1_COMMON *cm, |
| const POSITION *mi_pos) { |
| #if CONFIG_DEPENDENT_HORZTILES |
| const int dependent_horz_tile_flag = cm->dependent_horz_tiles; |
| #else |
| const int dependent_horz_tile_flag = 0; |
| (void)cm; |
| #endif |
| if (dependent_horz_tile_flag && !tile->tg_horz_boundary) { |
| return !(mi_row + mi_pos->row < 0 || |
| mi_col + mi_pos->col < tile->mi_col_start || |
| mi_row + mi_pos->row >= mi_rows || |
| mi_col + mi_pos->col >= tile->mi_col_end); |
| } else { |
| return !(mi_row + mi_pos->row < tile->mi_row_start || |
| mi_col + mi_pos->col < tile->mi_col_start || |
| mi_row + mi_pos->row >= tile->mi_row_end || |
| mi_col + mi_pos->col >= tile->mi_col_end); |
| } |
| } |
| |
| static INLINE int find_valid_row_offset(const TileInfo *const tile, int mi_row, |
| int mi_rows, const AV1_COMMON *cm, |
| int row_offset) { |
| #if CONFIG_DEPENDENT_HORZTILES |
| const int dependent_horz_tile_flag = cm->dependent_horz_tiles; |
| #else |
| const int dependent_horz_tile_flag = 0; |
| (void)cm; |
| #endif |
| if (dependent_horz_tile_flag && !tile->tg_horz_boundary) |
| return clamp(row_offset, -mi_row, mi_rows - mi_row - 1); |
| else |
| return clamp(row_offset, tile->mi_row_start - mi_row, |
| tile->mi_row_end - mi_row - 1); |
| } |
| |
| static INLINE int find_valid_col_offset(const TileInfo *const tile, int mi_col, |
| int col_offset) { |
| return clamp(col_offset, tile->mi_col_start - mi_col, |
| tile->mi_col_end - mi_col - 1); |
| } |
| |
| static INLINE void lower_mv_precision(MV *mv, int allow_hp |
| #if CONFIG_AMVR |
| , |
| int is_integer |
| #endif |
| ) { |
| #if CONFIG_AMVR |
| if (is_integer) { |
| integer_mv_precision(mv); |
| } else { |
| #endif |
| if (!allow_hp) { |
| if (mv->row & 1) mv->row += (mv->row > 0 ? -1 : 1); |
| if (mv->col & 1) mv->col += (mv->col > 0 ? -1 : 1); |
| } |
| #if CONFIG_AMVR |
| } |
| #endif |
| } |
| |
| static INLINE uint8_t av1_get_pred_diff_ctx(const int_mv pred_mv, |
| const int_mv this_mv) { |
| if (abs(this_mv.as_mv.row - pred_mv.as_mv.row) <= 4 && |
| abs(this_mv.as_mv.col - pred_mv.as_mv.col) <= 4) |
| return 2; |
| else |
| return 1; |
| } |
| |
| static INLINE int av1_nmv_ctx(const uint8_t ref_mv_count, |
| const CANDIDATE_MV *ref_mv_stack, int ref, |
| int ref_mv_idx) { |
| if (ref_mv_stack[ref_mv_idx].weight >= REF_CAT_LEVEL && ref_mv_count > 0) |
| return ref_mv_stack[ref_mv_idx].pred_diff[ref]; |
| |
| return 0; |
| } |
| |
| #if CONFIG_EXT_COMP_REFS |
| static INLINE int8_t av1_uni_comp_ref_idx(const MV_REFERENCE_FRAME *const rf) { |
| // Single ref pred |
| if (rf[1] <= INTRA_FRAME) return -1; |
| |
| // Bi-directional comp ref pred |
| if ((rf[0] < BWDREF_FRAME) && (rf[1] >= BWDREF_FRAME)) return -1; |
| |
| for (int8_t ref_idx = 0; ref_idx < UNIDIR_COMP_REFS; ++ref_idx) { |
| if (rf[0] == comp_ref0(ref_idx) && rf[1] == comp_ref1(ref_idx)) |
| return ref_idx; |
| } |
| return -1; |
| } |
| #endif // CONFIG_EXT_COMP_REFS |
| |
| static INLINE int8_t av1_ref_frame_type(const MV_REFERENCE_FRAME *const rf) { |
| if (rf[1] > INTRA_FRAME) { |
| #if CONFIG_EXT_COMP_REFS |
| int8_t uni_comp_ref_idx = av1_uni_comp_ref_idx(rf); |
| if (uni_comp_ref_idx >= 0) { |
| assert((TOTAL_REFS_PER_FRAME + FWD_REFS * BWD_REFS + uni_comp_ref_idx) < |
| MODE_CTX_REF_FRAMES); |
| return TOTAL_REFS_PER_FRAME + FWD_REFS * BWD_REFS + uni_comp_ref_idx; |
| } else { |
| #endif // CONFIG_EXT_COMP_REFS |
| return TOTAL_REFS_PER_FRAME + FWD_RF_OFFSET(rf[0]) + |
| BWD_RF_OFFSET(rf[1]) * FWD_REFS; |
| #if CONFIG_EXT_COMP_REFS |
| } |
| #endif // CONFIG_EXT_COMP_REFS |
| } |
| |
| return rf[0]; |
| } |
| |
| // clang-format off |
| static MV_REFERENCE_FRAME ref_frame_map[COMP_REFS][2] = { |
| { LAST_FRAME, BWDREF_FRAME }, { LAST2_FRAME, BWDREF_FRAME }, |
| { LAST3_FRAME, BWDREF_FRAME }, { GOLDEN_FRAME, BWDREF_FRAME }, |
| |
| { LAST_FRAME, ALTREF2_FRAME }, { LAST2_FRAME, ALTREF2_FRAME }, |
| { LAST3_FRAME, ALTREF2_FRAME }, { GOLDEN_FRAME, ALTREF2_FRAME }, |
| |
| { LAST_FRAME, ALTREF_FRAME }, { LAST2_FRAME, ALTREF_FRAME }, |
| { LAST3_FRAME, ALTREF_FRAME }, { GOLDEN_FRAME, ALTREF_FRAME } |
| |
| // TODO(zoeliu): Temporarily disable uni-directional comp refs |
| #if CONFIG_EXT_COMP_REFS |
| , { LAST_FRAME, LAST2_FRAME }, { LAST_FRAME, LAST3_FRAME }, |
| { LAST_FRAME, GOLDEN_FRAME }, { BWDREF_FRAME, ALTREF_FRAME } |
| // TODO(zoeliu): When ALTREF2 is enabled, we may add: |
| // {BWDREF_FRAME, ALTREF2_FRAME} |
| #endif // CONFIG_EXT_COMP_REFS |
| }; |
| // clang-format on |
| |
| static INLINE void av1_set_ref_frame(MV_REFERENCE_FRAME *rf, |
| int8_t ref_frame_type) { |
| if (ref_frame_type >= TOTAL_REFS_PER_FRAME) { |
| rf[0] = ref_frame_map[ref_frame_type - TOTAL_REFS_PER_FRAME][0]; |
| rf[1] = ref_frame_map[ref_frame_type - TOTAL_REFS_PER_FRAME][1]; |
| } else { |
| rf[0] = ref_frame_type; |
| rf[1] = NONE_FRAME; |
| #if CONFIG_INTRABC |
| assert(ref_frame_type > NONE_FRAME); |
| #else |
| assert(ref_frame_type > INTRA_FRAME); |
| #endif |
| assert(ref_frame_type < TOTAL_REFS_PER_FRAME); |
| } |
| } |
| |
| static INLINE int16_t av1_mode_context_analyzer( |
| const int16_t *const mode_context, const MV_REFERENCE_FRAME *const rf, |
| BLOCK_SIZE bsize, int block) { |
| int16_t mode_ctx = 0; |
| int8_t ref_frame_type = av1_ref_frame_type(rf); |
| |
| if (block >= 0) { |
| mode_ctx = mode_context[rf[0]] & 0x00ff; |
| (void)block; |
| (void)bsize; |
| |
| return mode_ctx; |
| } |
| |
| return mode_context[ref_frame_type]; |
| } |
| |
| static INLINE uint8_t av1_drl_ctx(const CANDIDATE_MV *ref_mv_stack, |
| int ref_idx) { |
| #if CONFIG_OPT_REF_MV |
| if (ref_mv_stack[0].weight >= REF_CAT_LEVEL) |
| return 0; |
| else |
| return 2; |
| #endif |
| |
| if (ref_mv_stack[ref_idx].weight >= REF_CAT_LEVEL && |
| ref_mv_stack[ref_idx + 1].weight >= REF_CAT_LEVEL) |
| return 0; |
| |
| if (ref_mv_stack[ref_idx].weight >= REF_CAT_LEVEL && |
| ref_mv_stack[ref_idx + 1].weight < REF_CAT_LEVEL) |
| return 2; |
| |
| if (ref_mv_stack[ref_idx].weight < REF_CAT_LEVEL && |
| ref_mv_stack[ref_idx + 1].weight < REF_CAT_LEVEL) |
| return 3; |
| |
| return 0; |
| } |
| |
| #if CONFIG_FRAME_MARKER |
| static INLINE int av1_refs_are_one_sided(const AV1_COMMON *cm) { |
| assert(!frame_is_intra_only(cm)); |
| |
| int one_sided_refs = 1; |
| for (int ref = 0; ref < INTER_REFS_PER_FRAME; ++ref) { |
| const int buf_idx = cm->frame_refs[ref].idx; |
| if (buf_idx == INVALID_IDX) continue; |
| |
| const int ref_offset = |
| cm->buffer_pool->frame_bufs[buf_idx].cur_frame_offset; |
| if (ref_offset > (int)cm->frame_offset) { |
| one_sided_refs = 0; // bwd reference |
| break; |
| } |
| } |
| return one_sided_refs; |
| } |
| |
| void av1_setup_frame_buf_refs(AV1_COMMON *cm); |
| #if CONFIG_FRAME_SIGN_BIAS |
| void av1_setup_frame_sign_bias(AV1_COMMON *cm); |
| #endif // CONFIG_FRAME_SIGN_BIAS |
| #if CONFIG_EXT_SKIP |
| void av1_setup_skip_mode_allowed(AV1_COMMON *cm); |
| #endif // CONFIG_EXT_SKIP |
| #if CONFIG_MFMV |
| void av1_setup_motion_field(AV1_COMMON *cm); |
| #endif // CONFIG_MFMV |
| #endif // CONFIG_FRAME_MARKER |
| |
| void av1_copy_frame_mvs(const AV1_COMMON *const cm, MODE_INFO *mi, int mi_row, |
| int mi_col, int x_mis, int y_mis); |
| |
| typedef void (*find_mv_refs_sync)(void *const data, int mi_row); |
| void av1_find_mv_refs(const AV1_COMMON *cm, const MACROBLOCKD *xd, |
| MODE_INFO *mi, MV_REFERENCE_FRAME ref_frame, |
| uint8_t *ref_mv_count, CANDIDATE_MV *ref_mv_stack, |
| int16_t *compound_mode_context, int_mv *mv_ref_list, |
| int mi_row, int mi_col, find_mv_refs_sync sync, |
| void *const data, int16_t *mode_context); |
| #if CONFIG_EXT_SKIP |
| void av1_setup_skip_mode_mvs(const AV1_COMMON *cm, const MACROBLOCKD *xd, |
| MB_MODE_INFO *mbmi, int mi_row, int mi_col, |
| const int_mv nearest_mv[2], find_mv_refs_sync sync, |
| void *const data); |
| #endif // CONFIG_EXT_SKIP |
| |
| // check a list of motion vectors by sad score using a number rows of pixels |
| // above and a number cols of pixels in the left to select the one with best |
| // score to use as ref motion vector |
| #if CONFIG_AMVR |
| void av1_find_best_ref_mvs(int allow_hp, int_mv *mvlist, int_mv *nearest_mv, |
| int_mv *near_mv, int is_integer); |
| #else |
| void av1_find_best_ref_mvs(int allow_hp, int_mv *mvlist, int_mv *nearest_mv, |
| int_mv *near_mv); |
| #endif |
| |
| // This function keeps a mode count for a given MB/SB |
| void av1_update_mv_context(const AV1_COMMON *cm, const MACROBLOCKD *xd, |
| MODE_INFO *mi, MV_REFERENCE_FRAME ref_frame, |
| int_mv *mv_ref_list, int mi_row, int mi_col, |
| int16_t *mode_context); |
| |
| #if CONFIG_EXT_WARPED_MOTION |
| int sortSamples(int *pts_mv, MV *mv, int *pts, int *pts_inref, int len); |
| int findSamples(const AV1_COMMON *cm, MACROBLOCKD *xd, int mi_row, int mi_col, |
| int *pts, int *pts_inref, int *pts_mv, int *pts_wm); |
| #else |
| int findSamples(const AV1_COMMON *cm, MACROBLOCKD *xd, int mi_row, int mi_col, |
| int *pts, int *pts_inref); |
| #endif // CONFIG_EXT_WARPED_MOTION |
| |
| #if CONFIG_INTRABC |
| #define INTRABC_DELAY_PIXELS 256 // Delay of 256 pixels |
| #define INTRABC_DELAY_SB64 (INTRABC_DELAY_PIXELS / 64) |
| #define USE_WAVE_FRONT 1 // Use only top left area of frame for reference. |
| #if CONFIG_LPF_SB |
| #define INTRABC_FILTER_DELAY 8 // Delay of 8 pixels |
| #endif // CONFIG_LPF_SB |
| |
| static INLINE void av1_find_ref_dv(int_mv *ref_dv, const TileInfo *const tile, |
| int mib_size, int mi_row, int mi_col) { |
| (void)mi_col; |
| if (mi_row - mib_size < tile->mi_row_start) { |
| ref_dv->as_mv.row = 0; |
| ref_dv->as_mv.col = -MI_SIZE * mib_size - INTRABC_DELAY_PIXELS; |
| } else { |
| ref_dv->as_mv.row = -MI_SIZE * mib_size; |
| ref_dv->as_mv.col = 0; |
| } |
| ref_dv->as_mv.row *= 8; |
| ref_dv->as_mv.col *= 8; |
| } |
| |
| static INLINE int av1_is_dv_valid(const MV dv, const TileInfo *const tile, |
| int mi_row, int mi_col, BLOCK_SIZE bsize, |
| int mib_size_log2) { |
| const int bw = block_size_wide[bsize]; |
| const int bh = block_size_high[bsize]; |
| const int SCALE_PX_TO_MV = 8; |
| // Disallow subpixel for now |
| // SUBPEL_MASK is not the correct scale |
| if (((dv.row & (SCALE_PX_TO_MV - 1)) || (dv.col & (SCALE_PX_TO_MV - 1)))) |
| return 0; |
| |
| // Is the source top-left inside the current tile? |
| const int src_top_edge = mi_row * MI_SIZE * SCALE_PX_TO_MV + dv.row; |
| const int tile_top_edge = tile->mi_row_start * MI_SIZE * SCALE_PX_TO_MV; |
| if (src_top_edge < tile_top_edge) return 0; |
| const int src_left_edge = mi_col * MI_SIZE * SCALE_PX_TO_MV + dv.col; |
| const int tile_left_edge = tile->mi_col_start * MI_SIZE * SCALE_PX_TO_MV; |
| if (src_left_edge < tile_left_edge) return 0; |
| // Is the bottom right inside the current tile? |
| #if CONFIG_LPF_SB |
| // Because of loop filter, the bottom 8 rows and the rightmost 8 cols of |
| // IntraBC area now is invalid. It is equal to let the valid region add an |
| // offset of the filter delay |
| const int src_bottom_edge = |
| (mi_row * MI_SIZE + bh + INTRABC_FILTER_DELAY) * SCALE_PX_TO_MV + dv.row; |
| #else |
| const int src_bottom_edge = (mi_row * MI_SIZE + bh) * SCALE_PX_TO_MV + dv.row; |
| #endif // CONFIG_LPF_SB |
| const int tile_bottom_edge = tile->mi_row_end * MI_SIZE * SCALE_PX_TO_MV; |
| if (src_bottom_edge > tile_bottom_edge) return 0; |
| #if CONFIG_LPF_SB |
| const int src_right_edge = |
| (mi_col * MI_SIZE + bw + INTRABC_FILTER_DELAY) * SCALE_PX_TO_MV + dv.col; |
| #else |
| const int src_right_edge = (mi_col * MI_SIZE + bw) * SCALE_PX_TO_MV + dv.col; |
| #endif // CONFIG_LPF_SB |
| const int tile_right_edge = tile->mi_col_end * MI_SIZE * SCALE_PX_TO_MV; |
| if (src_right_edge > tile_right_edge) return 0; |
| |
| // Is the bottom right within an already coded SB? Also consider additional |
| // constraints to facilitate HW decoder. |
| const int max_mib_size = 1 << mib_size_log2; |
| const int active_sb_row = mi_row >> mib_size_log2; |
| const int active_sb64_col = (mi_col * MI_SIZE) >> 6; |
| const int sb_size = max_mib_size * MI_SIZE; |
| const int src_sb_row = ((src_bottom_edge >> 3) - 1) / sb_size; |
| const int src_sb64_col = ((src_right_edge >> 3) - 1) >> 6; |
| const int total_sb64_per_row = |
| ((tile->mi_col_end - tile->mi_col_start - 1) >> 4) + 1; |
| const int active_sb64 = active_sb_row * total_sb64_per_row + active_sb64_col; |
| const int src_sb64 = src_sb_row * total_sb64_per_row + src_sb64_col; |
| if (src_sb64 >= active_sb64 - INTRABC_DELAY_SB64) return 0; |
| |
| #if USE_WAVE_FRONT |
| const int gradient = 1 + INTRABC_DELAY_SB64 + (sb_size > 64); |
| const int wf_offset = gradient * (active_sb_row - src_sb_row); |
| if (src_sb_row > active_sb_row || |
| src_sb64_col >= active_sb64_col - INTRABC_DELAY_SB64 + wf_offset) |
| return 0; |
| #endif |
| |
| return 1; |
| } |
| #endif // CONFIG_INTRABC |
| |
| #ifdef __cplusplus |
| } // extern "C" |
| #endif |
| |
| #endif // AV1_COMMON_MVREF_COMMON_H_ |
