| /* |
| * Copyright (c) 2016, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 2 Clause License and |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License |
| * was not distributed with this source code in the LICENSE file, you can |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open |
| * Media Patent License 1.0 was not distributed with this source code in the |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. |
| */ |
| |
| #include <math.h> |
| |
| #include "aom_ports/mem.h" |
| |
| #include "av1/encoder/aq_variance.h" |
| #include "av1/common/seg_common.h" |
| #include "av1/encoder/encodeframe.h" |
| #include "av1/encoder/ratectrl.h" |
| #include "av1/encoder/rd.h" |
| #include "av1/encoder/segmentation.h" |
| #include "av1/encoder/dwt.h" |
| #include "aom_ports/system_state.h" |
| |
| static const double rate_ratio[MAX_SEGMENTS] = { 2.2, 1.7, 1.3, 1.0, |
| 0.9, .8, .7, .6 }; |
| |
| static const double deltaq_rate_ratio[MAX_SEGMENTS] = { 2.5, 2.0, 1.5, 1.0, |
| 0.75, 1.0, 1.0, 1.0 }; |
| #define ENERGY_MIN (-4) |
| #define ENERGY_MAX (1) |
| #define ENERGY_SPAN (ENERGY_MAX - ENERGY_MIN + 1) |
| #define ENERGY_IN_BOUNDS(energy) \ |
| assert((energy) >= ENERGY_MIN && (energy) <= ENERGY_MAX) |
| |
| DECLARE_ALIGNED(16, static const uint8_t, av1_all_zeros[MAX_SB_SIZE]) = { 0 }; |
| |
| DECLARE_ALIGNED(16, static const uint16_t, |
| av1_highbd_all_zeros[MAX_SB_SIZE]) = { 0 }; |
| |
| static const int segment_id[ENERGY_SPAN] = { 0, 1, 1, 2, 3, 4 }; |
| |
| #define SEGMENT_ID(i) segment_id[(i)-ENERGY_MIN] |
| |
| void av1_vaq_frame_setup(AV1_COMP *cpi) { |
| AV1_COMMON *cm = &cpi->common; |
| struct segmentation *seg = &cm->seg; |
| int i; |
| |
| int resolution_change = |
| cm->prev_frame && (cm->width != cm->prev_frame->width || |
| cm->height != cm->prev_frame->height); |
| int avg_energy = (int)(cpi->twopass.mb_av_energy - 2); |
| double avg_ratio; |
| if (avg_energy > 7) avg_energy = 7; |
| if (avg_energy < 0) avg_energy = 0; |
| avg_ratio = rate_ratio[avg_energy]; |
| |
| if (resolution_change) { |
| memset(cpi->segmentation_map, 0, cm->mi_rows * cm->mi_cols); |
| av1_clearall_segfeatures(seg); |
| aom_clear_system_state(); |
| av1_disable_segmentation(seg); |
| return; |
| } |
| if (frame_is_intra_only(cm) || cm->error_resilient_mode || |
| cpi->refresh_alt_ref_frame || |
| (cpi->refresh_golden_frame && !cpi->rc.is_src_frame_alt_ref)) { |
| cpi->vaq_refresh = 1; |
| |
| av1_enable_segmentation(seg); |
| av1_clearall_segfeatures(seg); |
| |
| aom_clear_system_state(); |
| |
| for (i = 0; i < MAX_SEGMENTS; ++i) { |
| // Set up avg segment id to be 1.0 and adjust the other segments around |
| // it. |
| int qindex_delta = av1_compute_qdelta_by_rate( |
| &cpi->rc, cm->current_frame.frame_type, cm->base_qindex, |
| rate_ratio[i] / avg_ratio, cm->seq_params.bit_depth); |
| |
| // We don't allow qindex 0 in a segment if the base value is not 0. |
| // Q index 0 (lossless) implies 4x4 encoding only and in AQ mode a segment |
| // Q delta is sometimes applied without going back around the rd loop. |
| // This could lead to an illegal combination of partition size and q. |
| if ((cm->base_qindex != 0) && ((cm->base_qindex + qindex_delta) == 0)) { |
| qindex_delta = -cm->base_qindex + 1; |
| } |
| |
| av1_set_segdata(seg, i, SEG_LVL_ALT_Q, qindex_delta); |
| av1_enable_segfeature(seg, i, SEG_LVL_ALT_Q); |
| } |
| } |
| } |
| |
| int av1_log_block_var(const AV1_COMP *cpi, MACROBLOCK *x, BLOCK_SIZE bs) { |
| // This functions returns a score for the blocks local variance as calculated |
| // by: sum of the log of the (4x4 variances) of each subblock to the current |
| // block (x,bs) |
| // * 32 / number of pixels in the block_size. |
| // This is used for segmentation because to avoid situations in which a large |
| // block with a gentle gradient gets marked high variance even though each |
| // subblock has a low variance. This allows us to assign the same segment |
| // number for the same sorts of area regardless of how the partitioning goes. |
| |
| MACROBLOCKD *xd = &x->e_mbd; |
| double var = 0; |
| unsigned int sse; |
| int i, j; |
| |
| int right_overflow = |
| (xd->mb_to_right_edge < 0) ? ((-xd->mb_to_right_edge) >> 3) : 0; |
| int bottom_overflow = |
| (xd->mb_to_bottom_edge < 0) ? ((-xd->mb_to_bottom_edge) >> 3) : 0; |
| |
| const int bw = MI_SIZE * mi_size_wide[bs] - right_overflow; |
| const int bh = MI_SIZE * mi_size_high[bs] - bottom_overflow; |
| |
| aom_clear_system_state(); |
| |
| for (i = 0; i < bh; i += 4) { |
| for (j = 0; j < bw; j += 4) { |
| if (is_cur_buf_hbd(xd)) { |
| var += |
| log(1.0 + cpi->fn_ptr[BLOCK_4X4].vf( |
| x->plane[0].src.buf + i * x->plane[0].src.stride + j, |
| x->plane[0].src.stride, |
| CONVERT_TO_BYTEPTR(av1_highbd_all_zeros), 0, &sse) / |
| 16); |
| } else { |
| var += |
| log(1.0 + cpi->fn_ptr[BLOCK_4X4].vf( |
| x->plane[0].src.buf + i * x->plane[0].src.stride + j, |
| x->plane[0].src.stride, av1_all_zeros, 0, &sse) / |
| 16); |
| } |
| } |
| } |
| // Use average of 4x4 log variance. The range for 8 bit 0 - 9.704121561. |
| var /= (bw / 4 * bh / 4); |
| if (var > 7) var = 7; |
| |
| aom_clear_system_state(); |
| return (int)(var); |
| } |
| |
| #define DEFAULT_E_MIDPOINT 10.0 |
| |
| static unsigned int haar_ac_energy(MACROBLOCK *x, BLOCK_SIZE bs) { |
| MACROBLOCKD *xd = &x->e_mbd; |
| int stride = x->plane[0].src.stride; |
| uint8_t *buf = x->plane[0].src.buf; |
| const int bw = MI_SIZE * mi_size_wide[bs]; |
| const int bh = MI_SIZE * mi_size_high[bs]; |
| const int hbd = is_cur_buf_hbd(xd); |
| |
| int var = 0; |
| for (int r = 0; r < bh; r += 8) |
| for (int c = 0; c < bw; c += 8) { |
| var += av1_haar_ac_sad_8x8_uint8_input(buf + c + r * stride, stride, hbd); |
| } |
| |
| return (unsigned int)((uint64_t)var * 256) >> num_pels_log2_lookup[bs]; |
| } |
| |
| double av1_log_block_wavelet_energy(MACROBLOCK *x, BLOCK_SIZE bs) { |
| unsigned int haar_sad = haar_ac_energy(x, bs); |
| aom_clear_system_state(); |
| return log(haar_sad + 1.0); |
| } |
| |
| int av1_block_wavelet_energy_level(const AV1_COMP *cpi, MACROBLOCK *x, |
| BLOCK_SIZE bs) { |
| double energy, energy_midpoint; |
| aom_clear_system_state(); |
| energy_midpoint = (cpi->oxcf.pass == 2) ? cpi->twopass.frame_avg_haar_energy |
| : DEFAULT_E_MIDPOINT; |
| energy = av1_log_block_wavelet_energy(x, bs) - energy_midpoint; |
| return clamp((int)round(energy), ENERGY_MIN, ENERGY_MAX); |
| } |
| |
| int av1_compute_q_from_energy_level_deltaq_mode(const AV1_COMP *const cpi, |
| int block_var_level) { |
| int rate_level; |
| const AV1_COMMON *const cm = &cpi->common; |
| |
| if (DELTA_Q_PERCEPTUAL_MODULATION == 1) { |
| ENERGY_IN_BOUNDS(block_var_level); |
| rate_level = SEGMENT_ID(block_var_level); |
| } else { |
| rate_level = block_var_level; |
| } |
| int qindex_delta = av1_compute_qdelta_by_rate( |
| &cpi->rc, cm->current_frame.frame_type, cm->base_qindex, |
| deltaq_rate_ratio[rate_level], cm->seq_params.bit_depth); |
| |
| if ((cm->base_qindex != 0) && ((cm->base_qindex + qindex_delta) == 0)) { |
| qindex_delta = -cm->base_qindex + 1; |
| } |
| return cm->base_qindex + qindex_delta; |
| } |