| /* |
| * Copyright (c) 2019, Alliance for Open Media. All rights reserved |
| * |
| * This source code is subject to the terms of the BSD 2 Clause License and |
| * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License |
| * was not distributed with this source code in the LICENSE file, you can |
| * obtain it at www.aomedia.org/license/software. If the Alliance for Open |
| * Media Patent License 1.0 was not distributed with this source code in the |
| * PATENTS file, you can obtain it at www.aomedia.org/license/patent. |
| */ |
| |
| #include <vector> |
| #include "config/aom_config.h" |
| #include "third_party/googletest/src/googletest/include/gtest/gtest.h" |
| #include "test/codec_factory.h" |
| #include "test/datarate_test.h" |
| #include "test/encode_test_driver.h" |
| #include "test/i420_video_source.h" |
| #include "test/util.h" |
| #include "test/y4m_video_source.h" |
| #include "aom/aom_codec.h" |
| #include "av1/common/enums.h" |
| #include "av1/encoder/encoder.h" |
| |
| namespace datarate_test { |
| namespace { |
| |
| struct FrameInfo { |
| FrameInfo(aom_codec_pts_t _pts, unsigned int _w, unsigned int _h) |
| : pts(_pts), w(_w), h(_h) {} |
| |
| aom_codec_pts_t pts; |
| unsigned int w; |
| unsigned int h; |
| }; |
| |
| class DatarateTestSVC |
| : public ::libaom_test::CodecTestWith4Params<libaom_test::TestMode, int, |
| unsigned int, int>, |
| public DatarateTest { |
| public: |
| DatarateTestSVC() : DatarateTest(GET_PARAM(0)) { |
| set_cpu_used_ = GET_PARAM(2); |
| aq_mode_ = GET_PARAM(3); |
| } |
| |
| protected: |
| virtual void SetUp() { |
| InitializeConfig(); |
| SetMode(GET_PARAM(1)); |
| ResetModel(); |
| } |
| |
| virtual void DecompressedFrameHook(const aom_image_t &img, |
| aom_codec_pts_t pts) { |
| frame_info_list_.push_back(FrameInfo(pts, img.d_w, img.d_h)); |
| ++decoded_nframes_; |
| } |
| |
| std::vector<FrameInfo> frame_info_list_; |
| |
| virtual int GetNumSpatialLayers() { return number_spatial_layers_; } |
| |
| virtual void ResetModel() { |
| DatarateTest::ResetModel(); |
| layer_frame_cnt_ = 0; |
| superframe_cnt_ = 0; |
| number_temporal_layers_ = 1; |
| number_spatial_layers_ = 1; |
| for (int i = 0; i < AOM_MAX_LAYERS; i++) { |
| target_layer_bitrate_[i] = 0; |
| effective_datarate_tl[i] = 0.0; |
| } |
| memset(&layer_id_, 0, sizeof(aom_svc_layer_id_t)); |
| memset(&svc_params_, 0, sizeof(aom_svc_params_t)); |
| memset(&ref_frame_config_, 0, sizeof(aom_svc_ref_frame_config_t)); |
| drop_frames_ = 0; |
| for (int i = 0; i < 1000; i++) drop_frames_list_[i] = 1000; |
| decoded_nframes_ = 0; |
| mismatch_nframes_ = 0; |
| mismatch_psnr_ = 0.0; |
| set_frame_level_er_ = 0; |
| } |
| |
| virtual void PreEncodeFrameHook(::libaom_test::VideoSource *video, |
| ::libaom_test::Encoder *encoder) { |
| int spatial_layer_id = 0; |
| if (video->frame() == 0) { |
| initialize_svc(number_temporal_layers_, number_spatial_layers_, |
| &svc_params_); |
| encoder->Control(AV1E_SET_SVC_PARAMS, &svc_params_); |
| encoder->Control(AV1E_SET_ENABLE_ORDER_HINT, 0); |
| encoder->Control(AV1E_SET_ENABLE_TPL_MODEL, 0); |
| encoder->Control(AV1E_SET_DELTAQ_MODE, 0); |
| } |
| if (number_spatial_layers_ == 2) { |
| spatial_layer_id = (layer_frame_cnt_ % 2 == 0) ? 0 : 1; |
| } else if (number_spatial_layers_ == 3) { |
| spatial_layer_id = (layer_frame_cnt_ % 3 == 0) |
| ? 0 |
| : ((layer_frame_cnt_ - 1) % 3 == 0) ? 1 : 2; |
| } |
| // Set the reference/update flags, layer_id, and reference_map |
| // buffer index. |
| frame_flags_ = set_layer_pattern(video->frame(), &layer_id_, |
| &ref_frame_config_, spatial_layer_id); |
| encoder->Control(AV1E_SET_SVC_LAYER_ID, &layer_id_); |
| encoder->Control(AV1E_SET_SVC_REF_FRAME_CONFIG, &ref_frame_config_); |
| if (set_frame_level_er_) { |
| int mode = |
| (layer_id_.spatial_layer_id > 0 || layer_id_.temporal_layer_id > 0); |
| encoder->Control(AV1E_SET_ERROR_RESILIENT_MODE, mode); |
| } |
| layer_frame_cnt_++; |
| DatarateTest::PreEncodeFrameHook(video, encoder); |
| } |
| |
| virtual void FramePktHook(const aom_codec_cx_pkt_t *pkt) { |
| const size_t frame_size_in_bits = pkt->data.frame.sz * 8; |
| // Update the layer cumulative bitrate. |
| for (int i = layer_id_.temporal_layer_id; i < number_temporal_layers_; |
| i++) { |
| int layer = layer_id_.spatial_layer_id * number_temporal_layers_ + i; |
| effective_datarate_tl[layer] += 1.0 * frame_size_in_bits; |
| } |
| if (layer_id_.spatial_layer_id == number_spatial_layers_ - 1) { |
| last_pts_ = pkt->data.frame.pts; |
| superframe_cnt_++; |
| } |
| } |
| |
| virtual void EndPassHook(void) { |
| duration_ = ((last_pts_ + 1) * timebase_); |
| for (int i = 0; i < number_temporal_layers_ * number_spatial_layers_; i++) { |
| effective_datarate_tl[i] = (effective_datarate_tl[i] / 1000) / duration_; |
| } |
| } |
| |
| virtual bool DoDecode() const { |
| if (drop_frames_ > 0) { |
| for (unsigned int i = 0; i < drop_frames_; ++i) { |
| if (drop_frames_list_[i] == (unsigned int)superframe_cnt_) { |
| std::cout << " Skipping decoding frame: " |
| << drop_frames_list_[i] << "\n"; |
| return 0; |
| } |
| } |
| } |
| return 1; |
| } |
| |
| virtual void MismatchHook(const aom_image_t *img1, const aom_image_t *img2) { |
| double mismatch_psnr = compute_psnr(img1, img2); |
| mismatch_psnr_ += mismatch_psnr; |
| ++mismatch_nframes_; |
| } |
| |
| unsigned int GetMismatchFrames() { return mismatch_nframes_; } |
| unsigned int GetDecodedFrames() { return decoded_nframes_; } |
| |
| // Layer pattern configuration. |
| virtual int set_layer_pattern(int frame_cnt, aom_svc_layer_id_t *layer_id, |
| aom_svc_ref_frame_config_t *ref_frame_config, |
| int spatial_layer) { |
| layer_id->spatial_layer_id = spatial_layer; |
| // Set the referende map buffer idx for the 7 references: |
| // LAST_FRAME (0), LAST2_FRAME(1), LAST3_FRAME(2), GOLDEN_FRAME(3), |
| // BWDREF_FRAME(4), ALTREF2_FRAME(5), ALTREF_FRAME(6). |
| for (int i = 0; i < INTER_REFS_PER_FRAME; i++) { |
| ref_frame_config->ref_idx[i] = i; |
| ref_frame_config->reference[i] = 0; |
| } |
| for (int i = 0; i < REF_FRAMES; i++) ref_frame_config->refresh[i] = 0; |
| // Set layer_flags to 0 when using ref_frame_config->reference. |
| int layer_flags = 0; |
| // Always reference LAST. |
| ref_frame_config->reference[0] = 1; |
| if (number_temporal_layers_ == 3 && number_spatial_layers_ == 1) { |
| // 3-layer: |
| // 1 3 5 7 |
| // 2 6 |
| // 0 4 8 |
| if (frame_cnt % 4 == 0) { |
| // Base layer. |
| layer_id->temporal_layer_id = 0; |
| // Update LAST on layer 0, reference LAST and GF. |
| ref_frame_config->refresh[0] = 1; |
| ref_frame_config->reference[3] = 1; |
| } else if ((frame_cnt - 1) % 4 == 0) { |
| layer_id->temporal_layer_id = 2; |
| // First top layer: no updates, only reference LAST (TL0). |
| } else if ((frame_cnt - 2) % 4 == 0) { |
| layer_id->temporal_layer_id = 1; |
| // Middle layer (TL1): update LAST2, only reference LAST (TL0). |
| ref_frame_config->refresh[1] = 1; |
| } else if ((frame_cnt - 3) % 4 == 0) { |
| layer_id->temporal_layer_id = 2; |
| // Second top layer: no updates, only reference LAST. |
| // Set buffer idx for LAST to slot 1, since that was the slot |
| // updated in previous frame. So LAST is TL1 frame. |
| ref_frame_config->ref_idx[0] = 1; |
| ref_frame_config->ref_idx[1] = 0; |
| } |
| } else if (number_temporal_layers_ == 1 && number_spatial_layers_ == 2) { |
| layer_id->temporal_layer_id = 0; |
| if (layer_id->spatial_layer_id == 0) { |
| // Reference LAST, update LAST. Keep LAST and GOLDEN in slots 0 and 3. |
| ref_frame_config->ref_idx[0] = 0; |
| ref_frame_config->ref_idx[3] = 3; |
| ref_frame_config->refresh[0] = 1; |
| } else if (layer_id->spatial_layer_id == 1) { |
| // Reference LAST and GOLDEN. Set buffer_idx for LAST to slot 3 |
| // and GOLDEN to slot 0. Update slot 3 (LAST). |
| ref_frame_config->ref_idx[0] = 3; |
| ref_frame_config->ref_idx[3] = 0; |
| ref_frame_config->refresh[3] = 1; |
| } |
| // Reference GOLDEN. |
| if (layer_id->spatial_layer_id > 0) ref_frame_config->reference[3] = 1; |
| } else if (number_temporal_layers_ == 1 && number_spatial_layers_ == 3) { |
| // 3 spatial layers, 1 temporal. |
| // Note for this case , we set the buffer idx for all references to be |
| // either LAST or GOLDEN, which are always valid references, since decoder |
| // will check if any of the 7 references is valid scale in |
| // valid_ref_frame_size(). |
| layer_id->temporal_layer_id = 0; |
| if (layer_id->spatial_layer_id == 0) { |
| // Reference LAST, update LAST. Set all other buffer_idx to 0. |
| for (int i = 0; i < 7; i++) ref_frame_config->ref_idx[i] = 0; |
| ref_frame_config->refresh[0] = 1; |
| } else if (layer_id->spatial_layer_id == 1) { |
| // Reference LAST and GOLDEN. Set buffer_idx for LAST to slot 1 |
| // and GOLDEN (and all other refs) to slot 0. |
| // Update slot 1 (LAST). |
| for (int i = 0; i < 7; i++) ref_frame_config->ref_idx[i] = 0; |
| ref_frame_config->ref_idx[0] = 1; |
| ref_frame_config->refresh[1] = 1; |
| } else if (layer_id->spatial_layer_id == 2) { |
| // Reference LAST and GOLDEN. Set buffer_idx for LAST to slot 2 |
| // and GOLDEN (and all other refs) to slot 1. |
| // Update slot 2 (LAST). |
| for (int i = 0; i < 7; i++) ref_frame_config->ref_idx[i] = 1; |
| ref_frame_config->ref_idx[0] = 2; |
| ref_frame_config->refresh[2] = 1; |
| } |
| // Reference GOLDEN. |
| if (layer_id->spatial_layer_id > 0) ref_frame_config->reference[3] = 1; |
| } else if (number_temporal_layers_ == 3 && number_spatial_layers_ == 3) { |
| // 3 spatial and 3 temporal layer. |
| if (superframe_cnt_ % 4 == 0) { |
| // Base temporal layer. |
| layer_id->temporal_layer_id = 0; |
| if (layer_id->spatial_layer_id == 0) { |
| // Reference LAST, update LAST. |
| // Set all buffer_idx to 0. |
| for (int i = 0; i < 7; i++) ref_frame_config->ref_idx[i] = 0; |
| ref_frame_config->refresh[0] = 1; |
| } else if (layer_id->spatial_layer_id == 1) { |
| // Reference LAST and GOLDEN. Set buffer_idx for LAST to slot 1, |
| // GOLDEN (and all other refs) to slot 0. |
| // Update slot 1 (LAST). |
| for (int i = 0; i < 7; i++) ref_frame_config->ref_idx[i] = 0; |
| ref_frame_config->ref_idx[0] = 1; |
| ref_frame_config->refresh[1] = 1; |
| } else if (layer_id->spatial_layer_id == 2) { |
| // Reference LAST and GOLDEN. Set buffer_idx for LAST to slot 2, |
| // GOLDEN (and all other refs) to slot 1. |
| // Update slot 2 (LAST). |
| for (int i = 0; i < 7; i++) ref_frame_config->ref_idx[i] = 1; |
| ref_frame_config->ref_idx[0] = 2; |
| ref_frame_config->refresh[2] = 1; |
| } |
| } else if ((superframe_cnt_ - 1) % 4 == 0) { |
| // First top temporal enhancement layer. |
| layer_id->temporal_layer_id = 2; |
| if (layer_id->spatial_layer_id == 0) { |
| // Reference LAST (slot 0). |
| // Set GOLDEN to slot 3 and update slot 3. |
| // Set all other buffer_idx to slot 0. |
| for (int i = 0; i < 7; i++) ref_frame_config->ref_idx[i] = 0; |
| ref_frame_config->ref_idx[3] = 3; |
| ref_frame_config->refresh[3] = 1; |
| } else if (layer_id->spatial_layer_id == 1) { |
| // Reference LAST and GOLDEN. Set buffer_idx for LAST to slot 1, |
| // GOLDEN (and all other refs) to slot 3. |
| // Set LAST2 to slot 4 and Update slot 4. |
| for (int i = 0; i < 7; i++) ref_frame_config->ref_idx[i] = 3; |
| ref_frame_config->ref_idx[0] = 1; |
| ref_frame_config->ref_idx[1] = 4; |
| ref_frame_config->refresh[4] = 1; |
| } else if (layer_id->spatial_layer_id == 2) { |
| // Reference LAST and GOLDEN. Set buffer_idx for LAST to slot 2, |
| // GOLDEN (and all other refs) to slot 4. |
| // No update. |
| for (int i = 0; i < 7; i++) ref_frame_config->ref_idx[i] = 4; |
| ref_frame_config->ref_idx[0] = 2; |
| } |
| } else if ((superframe_cnt_ - 2) % 4 == 0) { |
| // Middle temporal enhancement layer. |
| layer_id->temporal_layer_id = 1; |
| if (layer_id->spatial_layer_id == 0) { |
| // Reference LAST. |
| // Set all buffer_idx to 0. |
| // Set GOLDEN to slot 5 and update slot 5. |
| for (int i = 0; i < 7; i++) ref_frame_config->ref_idx[i] = 0; |
| ref_frame_config->ref_idx[3] = 5; |
| ref_frame_config->refresh[5] = 1; |
| } else if (layer_id->spatial_layer_id == 1) { |
| // Reference LAST and GOLDEN. Set buffer_idx for LAST to slot 1, |
| // GOLDEN (and all other refs) to slot 5. |
| // Set LAST2 to slot 6 and update slot 6. |
| for (int i = 0; i < 7; i++) ref_frame_config->ref_idx[i] = 5; |
| ref_frame_config->ref_idx[0] = 1; |
| ref_frame_config->ref_idx[2] = 6; |
| ref_frame_config->refresh[6] = 1; |
| } else if (layer_id->spatial_layer_id == 2) { |
| // Reference LAST and GOLDEN. Set buffer_idx for LAST to slot 2, |
| // GOLDEN (and all other refs) to slot 6. |
| // Set LAST2 to slot 6 and update slot 7. |
| for (int i = 0; i < 7; i++) ref_frame_config->ref_idx[i] = 6; |
| ref_frame_config->ref_idx[0] = 2; |
| ref_frame_config->ref_idx[2] = 7; |
| ref_frame_config->refresh[7] = 1; |
| } |
| } else if ((superframe_cnt_ - 3) % 4 == 0) { |
| // Second top temporal enhancement layer. |
| layer_id->temporal_layer_id = 2; |
| if (layer_id->spatial_layer_id == 0) { |
| // Set LAST to slot 5 and reference LAST. |
| // Set GOLDEN to slot 3 and update slot 3. |
| // Set all other buffer_idx to 0. |
| for (int i = 0; i < 7; i++) ref_frame_config->ref_idx[i] = 0; |
| ref_frame_config->ref_idx[0] = 5; |
| ref_frame_config->ref_idx[3] = 3; |
| ref_frame_config->refresh[3] = 1; |
| } else if (layer_id->spatial_layer_id == 1) { |
| // Reference LAST and GOLDEN. Set buffer_idx for LAST to slot 6, |
| // GOLDEN to slot 3. Set LAST2 to slot 4 and update slot 4. |
| for (int i = 0; i < 7; i++) ref_frame_config->ref_idx[i] = 0; |
| ref_frame_config->ref_idx[0] = 6; |
| ref_frame_config->ref_idx[3] = 3; |
| ref_frame_config->ref_idx[1] = 4; |
| ref_frame_config->refresh[4] = 1; |
| } else if (layer_id->spatial_layer_id == 2) { |
| // Reference LAST and GOLDEN. Set buffer_idx for LAST to slot 7, |
| // GOLDEN to slot 4. No update. |
| for (int i = 0; i < 7; i++) ref_frame_config->ref_idx[i] = 0; |
| ref_frame_config->ref_idx[0] = 7; |
| ref_frame_config->ref_idx[3] = 4; |
| } |
| } |
| // Reference GOLDEN. |
| if (layer_id->spatial_layer_id > 0) ref_frame_config->reference[3] = 1; |
| } |
| return layer_flags; |
| } |
| |
| virtual void initialize_svc(int number_temporal_layers, |
| int number_spatial_layers, |
| aom_svc_params *svc_params) { |
| svc_params->number_spatial_layers = number_spatial_layers; |
| svc_params->number_temporal_layers = number_temporal_layers; |
| for (int i = 0; i < number_temporal_layers * number_spatial_layers; ++i) { |
| svc_params->max_quantizers[i] = 60; |
| svc_params->min_quantizers[i] = 2; |
| svc_params->layer_target_bitrate[i] = target_layer_bitrate_[i]; |
| } |
| // Do at most 3 spatial or temporal layers here. |
| svc_params->framerate_factor[0] = 1; |
| if (number_temporal_layers == 2) { |
| svc_params->framerate_factor[0] = 2; |
| svc_params->framerate_factor[1] = 1; |
| } else if (number_temporal_layers == 3) { |
| svc_params->framerate_factor[0] = 4; |
| svc_params->framerate_factor[1] = 2; |
| svc_params->framerate_factor[2] = 1; |
| } |
| svc_params->scaling_factor_num[0] = 1; |
| svc_params->scaling_factor_den[0] = 1; |
| if (number_spatial_layers == 2) { |
| svc_params->scaling_factor_num[0] = 1; |
| svc_params->scaling_factor_den[0] = 2; |
| svc_params->scaling_factor_num[1] = 1; |
| svc_params->scaling_factor_den[1] = 1; |
| } else if (number_spatial_layers == 3) { |
| svc_params->scaling_factor_num[0] = 1; |
| svc_params->scaling_factor_den[0] = 4; |
| svc_params->scaling_factor_num[1] = 1; |
| svc_params->scaling_factor_den[1] = 2; |
| svc_params->scaling_factor_num[2] = 1; |
| svc_params->scaling_factor_den[2] = 1; |
| } |
| } |
| |
| virtual void BasicRateTargetingSVC3TL1SLTest() { |
| cfg_.rc_buf_initial_sz = 500; |
| cfg_.rc_buf_optimal_sz = 500; |
| cfg_.rc_buf_sz = 1000; |
| cfg_.rc_dropframe_thresh = 0; |
| cfg_.rc_min_quantizer = 0; |
| cfg_.rc_max_quantizer = 63; |
| cfg_.rc_end_usage = AOM_CBR; |
| cfg_.g_lag_in_frames = 0; |
| cfg_.g_error_resilient = 1; |
| |
| ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, |
| 288, 30, 1, 0, 300); |
| const int bitrate_array[2] = { 200, 550 }; |
| cfg_.rc_target_bitrate = bitrate_array[GET_PARAM(4)]; |
| ResetModel(); |
| number_temporal_layers_ = 3; |
| target_layer_bitrate_[0] = 50 * cfg_.rc_target_bitrate / 100; |
| target_layer_bitrate_[1] = 70 * cfg_.rc_target_bitrate / 100; |
| target_layer_bitrate_[2] = cfg_.rc_target_bitrate; |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| for (int i = 0; i < number_temporal_layers_ * number_spatial_layers_; i++) { |
| ASSERT_GE(effective_datarate_tl[i], target_layer_bitrate_[i] * 0.80) |
| << " The datarate for the file is lower than target by too much!"; |
| ASSERT_LE(effective_datarate_tl[i], target_layer_bitrate_[i] * 1.30) |
| << " The datarate for the file is greater than target by too much!"; |
| } |
| } |
| |
| virtual void BasicRateTargetingSVC3TL1SLResizeTest() { |
| cfg_.rc_buf_initial_sz = 500; |
| cfg_.rc_buf_optimal_sz = 500; |
| cfg_.rc_buf_sz = 1000; |
| cfg_.rc_dropframe_thresh = 0; |
| cfg_.rc_min_quantizer = 0; |
| cfg_.rc_max_quantizer = 63; |
| cfg_.rc_end_usage = AOM_CBR; |
| cfg_.g_lag_in_frames = 0; |
| cfg_.g_error_resilient = 1; |
| cfg_.rc_resize_mode = RESIZE_DYNAMIC; |
| |
| ::libaom_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, |
| 1, 0, 400); |
| cfg_.g_w = 640; |
| cfg_.g_h = 480; |
| const int bitrate_array[2] = { 70, 100 }; |
| cfg_.rc_target_bitrate = bitrate_array[GET_PARAM(4)]; |
| ResetModel(); |
| number_temporal_layers_ = 3; |
| target_layer_bitrate_[0] = 50 * cfg_.rc_target_bitrate / 100; |
| target_layer_bitrate_[1] = 70 * cfg_.rc_target_bitrate / 100; |
| target_layer_bitrate_[2] = cfg_.rc_target_bitrate; |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| for (int i = 0; i < number_temporal_layers_ * number_spatial_layers_; i++) { |
| ASSERT_GE(effective_datarate_tl[i], target_layer_bitrate_[i] * 0.80) |
| << " The datarate for the file is lower than target by too much!"; |
| ASSERT_LE(effective_datarate_tl[i], target_layer_bitrate_[i] * 1.60) |
| << " The datarate for the file is greater than target by too much!"; |
| } |
| unsigned int last_w = cfg_.g_w; |
| unsigned int last_h = cfg_.g_h; |
| int resize_down_count = 0; |
| for (std::vector<FrameInfo>::const_iterator info = frame_info_list_.begin(); |
| info != frame_info_list_.end(); ++info) { |
| if (info->w != last_w || info->h != last_h) { |
| // Verify that resize down occurs. |
| ASSERT_LT(info->w, last_w); |
| ASSERT_LT(info->h, last_h); |
| last_w = info->w; |
| last_h = info->h; |
| resize_down_count++; |
| } |
| } |
| // Must be at least one resize down. |
| ASSERT_GE(resize_down_count, 1); |
| } |
| |
| virtual void BasicRateTargetingSVC1TL2SLTest() { |
| cfg_.rc_buf_initial_sz = 500; |
| cfg_.rc_buf_optimal_sz = 500; |
| cfg_.rc_buf_sz = 1000; |
| cfg_.rc_dropframe_thresh = 0; |
| cfg_.rc_min_quantizer = 0; |
| cfg_.rc_max_quantizer = 63; |
| cfg_.rc_end_usage = AOM_CBR; |
| cfg_.g_lag_in_frames = 0; |
| cfg_.g_error_resilient = 1; |
| |
| ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, |
| 288, 30, 1, 0, 300); |
| const int bitrate_array[2] = { 300, 600 }; |
| cfg_.rc_target_bitrate = bitrate_array[GET_PARAM(4)]; |
| ResetModel(); |
| number_temporal_layers_ = 1; |
| number_spatial_layers_ = 2; |
| target_layer_bitrate_[0] = 2 * cfg_.rc_target_bitrate / 4; |
| target_layer_bitrate_[1] = 2 * cfg_.rc_target_bitrate / 4; |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| for (int i = 0; i < number_temporal_layers_ * number_spatial_layers_; i++) { |
| ASSERT_GE(effective_datarate_tl[i], target_layer_bitrate_[i] * 0.80) |
| << " The datarate for the file is lower than target by too much!"; |
| ASSERT_LE(effective_datarate_tl[i], target_layer_bitrate_[i] * 1.35) |
| << " The datarate for the file is greater than target by too much!"; |
| } |
| } |
| |
| virtual void BasicRateTargetingSVC1TL3SLTest() { |
| cfg_.rc_buf_initial_sz = 500; |
| cfg_.rc_buf_optimal_sz = 500; |
| cfg_.rc_buf_sz = 1000; |
| cfg_.rc_dropframe_thresh = 0; |
| cfg_.rc_min_quantizer = 0; |
| cfg_.rc_max_quantizer = 63; |
| cfg_.rc_end_usage = AOM_CBR; |
| cfg_.g_lag_in_frames = 0; |
| cfg_.g_error_resilient = 1; |
| |
| ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, |
| 288, 30, 1, 0, 300); |
| const int bitrate_array[2] = { 500, 1000 }; |
| cfg_.rc_target_bitrate = bitrate_array[GET_PARAM(4)]; |
| ResetModel(); |
| number_temporal_layers_ = 1; |
| number_spatial_layers_ = 3; |
| target_layer_bitrate_[0] = 1 * cfg_.rc_target_bitrate / 8; |
| target_layer_bitrate_[1] = 3 * cfg_.rc_target_bitrate / 8; |
| target_layer_bitrate_[2] = 4 * cfg_.rc_target_bitrate / 8; |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| for (int i = 0; i < number_temporal_layers_ * number_spatial_layers_; i++) { |
| ASSERT_GE(effective_datarate_tl[i], target_layer_bitrate_[i] * 0.80) |
| << " The datarate for the file is lower than target by too much!"; |
| ASSERT_LE(effective_datarate_tl[i], target_layer_bitrate_[i] * 1.38) |
| << " The datarate for the file is greater than target by too much!"; |
| } |
| } |
| |
| virtual void BasicRateTargetingSVC3TL3SLTest() { |
| cfg_.rc_buf_initial_sz = 500; |
| cfg_.rc_buf_optimal_sz = 500; |
| cfg_.rc_buf_sz = 1000; |
| cfg_.rc_dropframe_thresh = 0; |
| cfg_.rc_min_quantizer = 0; |
| cfg_.rc_max_quantizer = 63; |
| cfg_.rc_end_usage = AOM_CBR; |
| cfg_.g_lag_in_frames = 0; |
| cfg_.g_error_resilient = 1; |
| |
| ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, |
| 288, 30, 1, 0, 300); |
| const int bitrate_array[2] = { 600, 1200 }; |
| cfg_.rc_target_bitrate = bitrate_array[GET_PARAM(4)]; |
| ResetModel(); |
| number_temporal_layers_ = 3; |
| number_spatial_layers_ = 3; |
| // SL0 |
| const int bitrate_sl0 = 1 * cfg_.rc_target_bitrate / 8; |
| target_layer_bitrate_[0] = 50 * bitrate_sl0 / 100; |
| target_layer_bitrate_[1] = 70 * bitrate_sl0 / 100; |
| target_layer_bitrate_[2] = bitrate_sl0; |
| // SL1 |
| const int bitrate_sl1 = 3 * cfg_.rc_target_bitrate / 8; |
| target_layer_bitrate_[3] = 50 * bitrate_sl1 / 100; |
| target_layer_bitrate_[4] = 70 * bitrate_sl1 / 100; |
| target_layer_bitrate_[5] = bitrate_sl1; |
| // SL2 |
| const int bitrate_sl2 = 4 * cfg_.rc_target_bitrate / 8; |
| target_layer_bitrate_[6] = 50 * bitrate_sl2 / 100; |
| target_layer_bitrate_[7] = 70 * bitrate_sl2 / 100; |
| target_layer_bitrate_[8] = bitrate_sl2; |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| for (int i = 0; i < number_temporal_layers_ * number_spatial_layers_; i++) { |
| ASSERT_GE(effective_datarate_tl[i], target_layer_bitrate_[i] * 0.80) |
| << " The datarate for the file is lower than target by too much!"; |
| ASSERT_LE(effective_datarate_tl[i], target_layer_bitrate_[i] * 1.38) |
| << " The datarate for the file is greater than target by too much!"; |
| } |
| } |
| |
| virtual void BasicRateTargetingSVC3TL3SLHDTest() { |
| cfg_.rc_buf_initial_sz = 500; |
| cfg_.rc_buf_optimal_sz = 500; |
| cfg_.rc_buf_sz = 1000; |
| cfg_.rc_dropframe_thresh = 0; |
| cfg_.rc_min_quantizer = 0; |
| cfg_.rc_max_quantizer = 63; |
| cfg_.rc_end_usage = AOM_CBR; |
| cfg_.g_lag_in_frames = 0; |
| cfg_.g_error_resilient = 1; |
| |
| ::libaom_test::Y4mVideoSource video("niklas_1280_720_30.y4m", 0, 60); |
| const int bitrate_array[2] = { 600, 1200 }; |
| cfg_.rc_target_bitrate = bitrate_array[GET_PARAM(4)]; |
| ResetModel(); |
| number_temporal_layers_ = 3; |
| number_spatial_layers_ = 3; |
| // SL0 |
| const int bitrate_sl0 = 1 * cfg_.rc_target_bitrate / 8; |
| target_layer_bitrate_[0] = 50 * bitrate_sl0 / 100; |
| target_layer_bitrate_[1] = 70 * bitrate_sl0 / 100; |
| target_layer_bitrate_[2] = bitrate_sl0; |
| // SL1 |
| const int bitrate_sl1 = 3 * cfg_.rc_target_bitrate / 8; |
| target_layer_bitrate_[3] = 50 * bitrate_sl1 / 100; |
| target_layer_bitrate_[4] = 70 * bitrate_sl1 / 100; |
| target_layer_bitrate_[5] = bitrate_sl1; |
| // SL2 |
| const int bitrate_sl2 = 4 * cfg_.rc_target_bitrate / 8; |
| target_layer_bitrate_[6] = 50 * bitrate_sl2 / 100; |
| target_layer_bitrate_[7] = 70 * bitrate_sl2 / 100; |
| target_layer_bitrate_[8] = bitrate_sl2; |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| for (int i = 0; i < number_temporal_layers_ * number_spatial_layers_; i++) { |
| ASSERT_GE(effective_datarate_tl[i], target_layer_bitrate_[i] * 0.70) |
| << " The datarate for the file is lower than target by too much!"; |
| ASSERT_LE(effective_datarate_tl[i], target_layer_bitrate_[i] * 1.4) |
| << " The datarate for the file is greater than target by too much!"; |
| } |
| } |
| |
| virtual void BasicRateTargetingSVC3TL3SLKfTest() { |
| cfg_.rc_buf_initial_sz = 500; |
| cfg_.rc_buf_optimal_sz = 500; |
| cfg_.rc_buf_sz = 1000; |
| cfg_.rc_dropframe_thresh = 0; |
| cfg_.rc_min_quantizer = 0; |
| cfg_.rc_max_quantizer = 63; |
| cfg_.rc_end_usage = AOM_CBR; |
| cfg_.g_lag_in_frames = 0; |
| cfg_.g_error_resilient = 1; |
| cfg_.kf_mode = AOM_KF_AUTO; |
| cfg_.kf_min_dist = cfg_.kf_max_dist = 100; |
| |
| ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, |
| 288, 30, 1, 0, 300); |
| const int bitrate_array[2] = { 600, 1200 }; |
| cfg_.rc_target_bitrate = bitrate_array[GET_PARAM(4)]; |
| ResetModel(); |
| number_temporal_layers_ = 3; |
| number_spatial_layers_ = 3; |
| // SL0 |
| const int bitrate_sl0 = 1 * cfg_.rc_target_bitrate / 8; |
| target_layer_bitrate_[0] = 50 * bitrate_sl0 / 100; |
| target_layer_bitrate_[1] = 70 * bitrate_sl0 / 100; |
| target_layer_bitrate_[2] = bitrate_sl0; |
| // SL1 |
| const int bitrate_sl1 = 3 * cfg_.rc_target_bitrate / 8; |
| target_layer_bitrate_[3] = 50 * bitrate_sl1 / 100; |
| target_layer_bitrate_[4] = 70 * bitrate_sl1 / 100; |
| target_layer_bitrate_[5] = bitrate_sl1; |
| // SL2 |
| const int bitrate_sl2 = 4 * cfg_.rc_target_bitrate / 8; |
| target_layer_bitrate_[6] = 50 * bitrate_sl2 / 100; |
| target_layer_bitrate_[7] = 70 * bitrate_sl2 / 100; |
| target_layer_bitrate_[8] = bitrate_sl2; |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| for (int i = 0; i < number_temporal_layers_ * number_spatial_layers_; i++) { |
| ASSERT_GE(effective_datarate_tl[i], target_layer_bitrate_[i] * 0.75) |
| << " The datarate for the file is lower than target by too much!"; |
| ASSERT_LE(effective_datarate_tl[i], target_layer_bitrate_[i] * 1.4) |
| << " The datarate for the file is greater than target by too much!"; |
| } |
| } |
| |
| virtual void BasicRateTargeting444SVC3TL3SLTest() { |
| cfg_.rc_buf_initial_sz = 500; |
| cfg_.rc_buf_optimal_sz = 500; |
| cfg_.rc_buf_sz = 1000; |
| cfg_.rc_dropframe_thresh = 0; |
| cfg_.rc_min_quantizer = 0; |
| cfg_.rc_max_quantizer = 63; |
| cfg_.rc_end_usage = AOM_CBR; |
| cfg_.g_lag_in_frames = 0; |
| cfg_.g_error_resilient = 1; |
| cfg_.g_profile = 1; |
| |
| ::libaom_test::Y4mVideoSource video("rush_hour_444.y4m", 0, 140); |
| |
| const int bitrate_array[2] = { 600, 1200 }; |
| cfg_.rc_target_bitrate = bitrate_array[GET_PARAM(4)]; |
| ResetModel(); |
| number_temporal_layers_ = 3; |
| number_spatial_layers_ = 3; |
| // SL0 |
| const int bitrate_sl0 = 1 * cfg_.rc_target_bitrate / 8; |
| target_layer_bitrate_[0] = 50 * bitrate_sl0 / 100; |
| target_layer_bitrate_[1] = 70 * bitrate_sl0 / 100; |
| target_layer_bitrate_[2] = bitrate_sl0; |
| // SL1 |
| const int bitrate_sl1 = 3 * cfg_.rc_target_bitrate / 8; |
| target_layer_bitrate_[3] = 50 * bitrate_sl1 / 100; |
| target_layer_bitrate_[4] = 70 * bitrate_sl1 / 100; |
| target_layer_bitrate_[5] = bitrate_sl1; |
| // SL2 |
| const int bitrate_sl2 = 4 * cfg_.rc_target_bitrate / 8; |
| target_layer_bitrate_[6] = 50 * bitrate_sl2 / 100; |
| target_layer_bitrate_[7] = 70 * bitrate_sl2 / 100; |
| target_layer_bitrate_[8] = bitrate_sl2; |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| for (int i = 0; i < number_temporal_layers_ * number_spatial_layers_; i++) { |
| ASSERT_GE(effective_datarate_tl[i], target_layer_bitrate_[i] * 0.70) |
| << " The datarate for the file is lower than target by too much!"; |
| ASSERT_LE(effective_datarate_tl[i], target_layer_bitrate_[i] * 1.38) |
| << " The datarate for the file is greater than target by too much!"; |
| } |
| } |
| |
| virtual void BasicRateTargetingSVC3TL1SLDropAllEnhTest() { |
| cfg_.rc_buf_initial_sz = 500; |
| cfg_.rc_buf_optimal_sz = 500; |
| cfg_.rc_buf_sz = 1000; |
| cfg_.rc_dropframe_thresh = 0; |
| cfg_.rc_min_quantizer = 0; |
| cfg_.rc_max_quantizer = 63; |
| cfg_.rc_end_usage = AOM_CBR; |
| cfg_.g_lag_in_frames = 0; |
| // error_resilient can set to off/0, since for SVC the context update |
| // is done per-layer. |
| cfg_.g_error_resilient = 0; |
| |
| ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, |
| 288, 30, 1, 0, 300); |
| const int bitrate_array[2] = { 200, 550 }; |
| cfg_.rc_target_bitrate = bitrate_array[GET_PARAM(4)]; |
| ResetModel(); |
| // Drop TL1 and TL2: #frames(300) - #TL0. |
| drop_frames_ = 300 - 300 / 4; |
| int n = 0; |
| for (int i = 0; i < 300; i++) { |
| if (i % 4 != 0) { |
| drop_frames_list_[n] = i; |
| n++; |
| } |
| } |
| number_temporal_layers_ = 3; |
| target_layer_bitrate_[0] = 50 * cfg_.rc_target_bitrate / 100; |
| target_layer_bitrate_[1] = 70 * cfg_.rc_target_bitrate / 100; |
| target_layer_bitrate_[2] = cfg_.rc_target_bitrate; |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| for (int i = 0; i < number_temporal_layers_ * number_spatial_layers_; i++) { |
| ASSERT_GE(effective_datarate_tl[i], target_layer_bitrate_[i] * 0.80) |
| << " The datarate for the file is lower than target by too much!"; |
| ASSERT_LE(effective_datarate_tl[i], target_layer_bitrate_[i] * 1.30) |
| << " The datarate for the file is greater than target by too much!"; |
| } |
| // Test that no mismatches have been found. |
| std::cout << " Decoded frames: " << GetDecodedFrames() << "\n"; |
| std::cout << " Mismatch frames: " << GetMismatchFrames() << "\n"; |
| EXPECT_EQ(300 - GetDecodedFrames(), drop_frames_); |
| EXPECT_EQ((int)GetMismatchFrames(), 0); |
| } |
| |
| virtual void BasicRateTargetingSVC3TL1SLDropTL2EnhTest() { |
| cfg_.rc_buf_initial_sz = 500; |
| cfg_.rc_buf_optimal_sz = 500; |
| cfg_.rc_buf_sz = 1000; |
| cfg_.rc_dropframe_thresh = 0; |
| cfg_.rc_min_quantizer = 0; |
| cfg_.rc_max_quantizer = 63; |
| cfg_.rc_end_usage = AOM_CBR; |
| cfg_.g_lag_in_frames = 0; |
| // error_resilient for sequence can be off/0, since dropped frames (TL2) |
| // are non-reference frames. |
| cfg_.g_error_resilient = 0; |
| |
| ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, |
| 288, 30, 1, 0, 300); |
| const int bitrate_array[2] = { 200, 550 }; |
| cfg_.rc_target_bitrate = bitrate_array[GET_PARAM(4)]; |
| ResetModel(); |
| // Drop TL2: #frames(300) - (#TL0 + #TL1). |
| drop_frames_ = 300 - 300 / 2; |
| int n = 0; |
| for (int i = 0; i < 300; i++) { |
| if (i % 2 != 0) { |
| drop_frames_list_[n] = i; |
| n++; |
| } |
| } |
| number_temporal_layers_ = 3; |
| target_layer_bitrate_[0] = 50 * cfg_.rc_target_bitrate / 100; |
| target_layer_bitrate_[1] = 70 * cfg_.rc_target_bitrate / 100; |
| target_layer_bitrate_[2] = cfg_.rc_target_bitrate; |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| for (int i = 0; i < number_temporal_layers_ * number_spatial_layers_; i++) { |
| ASSERT_GE(effective_datarate_tl[i], target_layer_bitrate_[i] * 0.80) |
| << " The datarate for the file is lower than target by too much!"; |
| ASSERT_LE(effective_datarate_tl[i], target_layer_bitrate_[i] * 1.30) |
| << " The datarate for the file is greater than target by too much!"; |
| } |
| // Test that no mismatches have been found. |
| std::cout << " Decoded frames: " << GetDecodedFrames() << "\n"; |
| std::cout << " Mismatch frames: " << GetMismatchFrames() << "\n"; |
| EXPECT_EQ(300 - GetDecodedFrames(), drop_frames_); |
| EXPECT_EQ((int)GetMismatchFrames(), 0); |
| } |
| |
| virtual void BasicRateTargetingSVC3TL1SLDropAllEnhFrameERTest() { |
| cfg_.rc_buf_initial_sz = 500; |
| cfg_.rc_buf_optimal_sz = 500; |
| cfg_.rc_buf_sz = 1000; |
| cfg_.rc_dropframe_thresh = 0; |
| cfg_.rc_min_quantizer = 0; |
| cfg_.rc_max_quantizer = 63; |
| cfg_.rc_end_usage = AOM_CBR; |
| cfg_.g_lag_in_frames = 0; |
| |
| ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, |
| 288, 30, 1, 0, 300); |
| const int bitrate_array[2] = { 200, 550 }; |
| cfg_.rc_target_bitrate = bitrate_array[GET_PARAM(4)]; |
| ResetModel(); |
| // Set error_resilience at frame level, with codec control, |
| // on/1 for enahancement layers and off/0 for base layer frames. |
| set_frame_level_er_ = 1; |
| |
| // Drop TL1 and TL2: #frames(300) - #TL0. |
| drop_frames_ = 300 - 300 / 4; |
| int n = 0; |
| for (int i = 0; i < 300; i++) { |
| if (i % 4 != 0) { |
| drop_frames_list_[n] = i; |
| n++; |
| } |
| } |
| number_temporal_layers_ = 3; |
| target_layer_bitrate_[0] = 50 * cfg_.rc_target_bitrate / 100; |
| target_layer_bitrate_[1] = 70 * cfg_.rc_target_bitrate / 100; |
| target_layer_bitrate_[2] = cfg_.rc_target_bitrate; |
| ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); |
| for (int i = 0; i < number_temporal_layers_ * number_spatial_layers_; i++) { |
| ASSERT_GE(effective_datarate_tl[i], target_layer_bitrate_[i] * 0.80) |
| << " The datarate for the file is lower than target by too much!"; |
| ASSERT_LE(effective_datarate_tl[i], target_layer_bitrate_[i] * 1.30) |
| << " The datarate for the file is greater than target by too much!"; |
| } |
| // Test that no mismatches have been found. |
| std::cout << " Decoded frames: " << GetDecodedFrames() << "\n"; |
| std::cout << " Mismatch frames: " << GetMismatchFrames() << "\n"; |
| EXPECT_EQ(300 - GetDecodedFrames(), drop_frames_); |
| EXPECT_EQ((int)GetMismatchFrames(), 0); |
| } |
| |
| int layer_frame_cnt_; |
| int superframe_cnt_; |
| int number_temporal_layers_; |
| int number_spatial_layers_; |
| // Allow for up to 3 temporal layers. |
| int target_layer_bitrate_[AOM_MAX_LAYERS]; |
| aom_svc_params_t svc_params_; |
| aom_svc_ref_frame_config_t ref_frame_config_; |
| aom_svc_layer_id_t layer_id_; |
| double effective_datarate_tl[AOM_MAX_LAYERS]; |
| unsigned int drop_frames_; |
| unsigned int drop_frames_list_[1000]; |
| unsigned int mismatch_nframes_; |
| unsigned int decoded_nframes_; |
| double mismatch_psnr_; |
| int set_frame_level_er_; |
| }; |
| |
| // Check basic rate targeting for CBR, for 3 temporal layers, 1 spatial. |
| TEST_P(DatarateTestSVC, BasicRateTargetingSVC3TL1SL) { |
| BasicRateTargetingSVC3TL1SLTest(); |
| } |
| |
| // Check basic rate targeting for CBR, for 3 temporal layers, 1 spatial, |
| // with dynamic resize on. Encode at very low bitrate and check that |
| // there is at least one resize (down) event. |
| TEST_P(DatarateTestSVC, BasicRateTargetingSVC3TL1SLResize) { |
| BasicRateTargetingSVC3TL1SLResizeTest(); |
| } |
| |
| // Check basic rate targeting for CBR, for 2 spatial layers, 1 temporal. |
| TEST_P(DatarateTestSVC, BasicRateTargetingSVC1TL2SL) { |
| BasicRateTargetingSVC1TL2SLTest(); |
| } |
| |
| // Check basic rate targeting for CBR, for 3 spatial layers, 1 temporal. |
| TEST_P(DatarateTestSVC, BasicRateTargetingSVC1TL3SL) { |
| BasicRateTargetingSVC1TL3SLTest(); |
| } |
| |
| // Check basic rate targeting for CBR, for 3 spatial, 3 temporal layers. |
| TEST_P(DatarateTestSVC, BasicRateTargetingSVC3TL3SL) { |
| BasicRateTargetingSVC3TL3SLTest(); |
| } |
| |
| // Check basic rate targeting for CBR, for 3 spatial, 3 temporal layers. |
| TEST_P(DatarateTestSVC, BasicRateTargetingSVC3TL3SLHD) { |
| BasicRateTargetingSVC3TL3SLHDTest(); |
| } |
| |
| // Check basic rate targeting for CBR, for 3 spatial, 3 temporal layers, |
| // for auto key frame mode with short key frame period. |
| TEST_P(DatarateTestSVC, BasicRateTargetingSVC3TL3SLKf) { |
| BasicRateTargetingSVC3TL3SLKfTest(); |
| } |
| |
| // Check basic rate targeting for CBR, for 3 spatial, 3 temporal layers, |
| // for 4:4:4 input. |
| TEST_P(DatarateTestSVC, BasicRateTargeting444SVC3TL3SL) { |
| BasicRateTargeting444SVC3TL3SLTest(); |
| } |
| |
| // Check basic rate targeting for CBR, for 3 temporal layers, 1 spatial layer, |
| // with dropping of all enhancement layers (TL 1 and TL2). Check that the base |
| // layer (TL0) can still be decodeable (with no mismatch) with the |
| // error_resilient flag set to 0. |
| TEST_P(DatarateTestSVC, BasicRateTargetingSVC3TL1SLDropAllEnh) { |
| BasicRateTargetingSVC3TL1SLDropAllEnhTest(); |
| } |
| |
| // Check basic rate targeting for CBR, for 3 temporal layers, 1 spatial layer, |
| // with dropping of the TL2 enhancement layer, which are non-reference |
| // (droppble) frames. For the base layer (TL0) and TL1 to still be decodeable |
| // (with no mismatch), the error_resilient_flag may be off (set to 0), |
| // since TL2 are non-reference frames. |
| TEST_P(DatarateTestSVC, BasicRateTargetingSVC3TL1SLDropTL2Enh) { |
| BasicRateTargetingSVC3TL1SLDropTL2EnhTest(); |
| } |
| |
| // Check basic rate targeting for CBR, for 3 temporal layers, 1 spatial layer, |
| // with dropping of all enhancement layers (TL 1 and TL2). Test that the |
| // error_resilient flag can be set at frame level, with on/1 on |
| // enhancement layers and off/0 on base layer. |
| // This allows for successful decoding after dropping enhancement layer frames. |
| TEST_P(DatarateTestSVC, BasicRateTargetingSVC3TL1SLDropAllEnhFrameER) { |
| BasicRateTargetingSVC3TL1SLDropAllEnhFrameERTest(); |
| } |
| |
| AV1_INSTANTIATE_TEST_SUITE(DatarateTestSVC, |
| ::testing::Values(::libaom_test::kRealTime), |
| ::testing::Range(7, 9), |
| ::testing::Range<unsigned int>(0, 4), |
| ::testing::Values(0, 1)); |
| |
| } // namespace |
| } // namespace datarate_test |
