test/datarate_test.cc - aom - Git at Google

 /*
  * Copyright (c) 2016, Alliance for Open Media. All rights reserved
  *
  * This source code is subject to the terms of the BSD 2 Clause License and
  * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License
  * was not distributed with this source code in the LICENSE file, you can
  * obtain it at www.aomedia.org/license/software. If the Alliance for Open
  * Media Patent License 1.0 was not distributed with this source code in the
  * PATENTS file, you can obtain it at www.aomedia.org/license/patent.
 */

 #include "./aom_config.h"
 #include "third_party/googletest/src/include/gtest/gtest.h"
 #include "test/codec_factory.h"
 #include "test/encode_test_driver.h"
 #include "test/i420_video_source.h"
 #include "test/util.h"
 #include "test/y4m_video_source.h"
 #include "aom/aom_codec.h"

 namespace {

 class DatarateTestLarge
     : public ::libaom_test::EncoderTest,
       public ::libaom_test::CodecTestWithParam<libaom_test::TestMode> {
  public:
   DatarateTestLarge() : EncoderTest(GET_PARAM(0)) {}

   virtual ~DatarateTestLarge() {}

  protected:
   virtual void SetUp() {
     InitializeConfig();
     SetMode(GET_PARAM(1));
     ResetModel();
   }

   virtual void ResetModel() {
     last_pts_ = 0;
     bits_in_buffer_model_ = cfg_.rc_target_bitrate * cfg_.rc_buf_initial_sz;
     frame_number_ = 0;
     first_drop_ = 0;
     bits_total_ = 0;
     duration_ = 0.0;
     denoiser_offon_test_ = 0;
     denoiser_offon_period_ = -1;
   }

   virtual void PreEncodeFrameHook(::libaom_test::VideoSource *video,
                                   ::libaom_test::Encoder *encoder) {
     if (video->frame() == 0)
       encoder->Control(AOME_SET_NOISE_SENSITIVITY, denoiser_on_);

     if (denoiser_offon_test_) {
       ASSERT_GT(denoiser_offon_period_, 0)
           << "denoiser_offon_period_ is not positive.";
       if ((video->frame() + 1) % denoiser_offon_period_ == 0) {
         // Flip denoiser_on_ periodically
         denoiser_on_ ^= 1;
       }
       encoder->Control(AOME_SET_NOISE_SENSITIVITY, denoiser_on_);
     }

     const aom_rational_t tb = video->timebase();
     timebase_ = static_cast<double>(tb.num) / tb.den;
     duration_ = 0;
   }

   virtual void FramePktHook(const aom_codec_cx_pkt_t *pkt) {
     // Time since last timestamp = duration.
     aom_codec_pts_t duration = pkt->data.frame.pts - last_pts_;

     // TODO(jimbankoski): Remove these lines when the issue:
     // http://code.google.com/p/webm/issues/detail?id=496 is fixed.
     // For now the codec assumes buffer starts at starting buffer rate
     // plus one frame's time.
     if (last_pts_ == 0) duration = 1;

     // Add to the buffer the bits we'd expect from a constant bitrate server.
     bits_in_buffer_model_ += static_cast<int64_t>(
         duration * timebase_ * cfg_.rc_target_bitrate * 1000);

     /* Test the buffer model here before subtracting the frame. Do so because
      * the way the leaky bucket model works in libaom is to allow the buffer to
      * empty - and then stop showing frames until we've got enough bits to
      * show one. As noted in comment below (issue 495), this does not currently
      * apply to key frames. For now exclude key frames in condition below. */
     const bool key_frame =
         (pkt->data.frame.flags & AOM_FRAME_IS_KEY) ? true : false;
     if (!key_frame) {
       ASSERT_GE(bits_in_buffer_model_, 0) << "Buffer Underrun at frame "
                                           << pkt->data.frame.pts;
     }

     const size_t frame_size_in_bits = pkt->data.frame.sz * 8;

     // Subtract from the buffer the bits associated with a played back frame.
     bits_in_buffer_model_ -= frame_size_in_bits;

     // Update the running total of bits for end of test datarate checks.
     bits_total_ += frame_size_in_bits;

     // If first drop not set and we have a drop set it to this time.
     if (!first_drop_ && duration > 1) first_drop_ = last_pts_ + 1;

     // Update the most recent pts.
     last_pts_ = pkt->data.frame.pts;

     // We update this so that we can calculate the datarate minus the last
     // frame encoded in the file.
     bits_in_last_frame_ = frame_size_in_bits;

     ++frame_number_;
   }

   virtual void EndPassHook(void) {
     if (bits_total_) {
       const double file_size_in_kb = bits_total_ / 1000.;  // bits per kilobit

       duration_ = (last_pts_ + 1) * timebase_;

       // Effective file datarate includes the time spent prebuffering.
       effective_datarate_ = (bits_total_ - bits_in_last_frame_) / 1000.0 /
                             (cfg_.rc_buf_initial_sz / 1000.0 + duration_);

       file_datarate_ = file_size_in_kb / duration_;
     }
   }

   aom_codec_pts_t last_pts_;
   int64_t bits_in_buffer_model_;
   double timebase_;
   int frame_number_;
   aom_codec_pts_t first_drop_;
   int64_t bits_total_;
   double duration_;
   double file_datarate_;
   double effective_datarate_;
   size_t bits_in_last_frame_;
   int denoiser_on_;
   int denoiser_offon_test_;
   int denoiser_offon_period_;
 };

 #if CONFIG_TEMPORAL_DENOISING
 // Check basic datarate targeting, for a single bitrate, but loop over the
 // various denoiser settings.
 TEST_P(DatarateTestLarge, DenoiserLevels) {
   cfg_.rc_buf_initial_sz = 500;
   cfg_.rc_dropframe_thresh = 1;
   cfg_.rc_max_quantizer = 56;
   cfg_.rc_end_usage = AOM_CBR;
   ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
                                        30, 1, 0, 140);
   for (int j = 1; j < 5; ++j) {
     // Run over the denoiser levels.
     // For the temporal denoiser (#if CONFIG_TEMPORAL_DENOISING) the level j
     // refers to the 4 denoiser modes: denoiserYonly, denoiserOnYUV,
     // denoiserOnAggressive, and denoiserOnAdaptive.
     // For the spatial denoiser (if !CONFIG_TEMPORAL_DENOISING), the level j
     // refers to the blur thresholds: 20, 40, 60 80.
     // The j = 0 case (denoiser off) is covered in the tests below.
     denoiser_on_ = j;
     cfg_.rc_target_bitrate = 300;
     ResetModel();
     ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
     ASSERT_GE(cfg_.rc_target_bitrate, effective_datarate_ * 0.95)
         << " The datarate for the file exceeds the target!";

     ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.3)
         << " The datarate for the file missed the target!";
   }
 }

 // Check basic datarate targeting, for a single bitrate, when denoiser is off
 // and on.
 TEST_P(DatarateTestLarge, DenoiserOffOn) {
   cfg_.rc_buf_initial_sz = 500;
   cfg_.rc_dropframe_thresh = 1;
   cfg_.rc_max_quantizer = 56;
   cfg_.rc_end_usage = AOM_CBR;
   ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
                                        30, 1, 0, 299);
   cfg_.rc_target_bitrate = 300;
   ResetModel();
   // The denoiser is off by default.
   denoiser_on_ = 0;
   // Set the offon test flag.
   denoiser_offon_test_ = 1;
   denoiser_offon_period_ = 100;
   ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
   ASSERT_GE(cfg_.rc_target_bitrate, effective_datarate_ * 0.95)
       << " The datarate for the file exceeds the target!";
   ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.3)
       << " The datarate for the file missed the target!";
 }
 #endif  // CONFIG_TEMPORAL_DENOISING

 TEST_P(DatarateTestLarge, BasicBufferModel) {
   denoiser_on_ = 0;
   cfg_.rc_buf_initial_sz = 500;
   cfg_.rc_dropframe_thresh = 1;
   cfg_.rc_max_quantizer = 56;
   cfg_.rc_end_usage = AOM_CBR;
   // 2 pass cbr datarate control has a bug hidden by the small # of
   // frames selected in this encode. The problem is that even if the buffer is
   // negative we produce a keyframe on a cutscene. Ignoring datarate
   // constraints
   // TODO(jimbankoski): ( Fix when issue
   // http://code.google.com/p/webm/issues/detail?id=495 is addressed. )
   ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
                                        30, 1, 0, 140);

   // There is an issue for low bitrates in real-time mode, where the
   // effective_datarate slightly overshoots the target bitrate.
   // This is same the issue as noted about (#495).
   // TODO(jimbankoski/marpan): Update test to run for lower bitrates (< 100),
   // when the issue is resolved.
   for (int i = 100; i < 800; i += 200) {
     cfg_.rc_target_bitrate = i;
     ResetModel();
     ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
     ASSERT_GE(cfg_.rc_target_bitrate, effective_datarate_ * 0.95)
         << " The datarate for the file exceeds the target!";

     ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.3)
         << " The datarate for the file missed the target!";
   }
 }

 TEST_P(DatarateTestLarge, ChangingDropFrameThresh) {
   denoiser_on_ = 0;
   cfg_.rc_buf_initial_sz = 500;
   cfg_.rc_max_quantizer = 36;
   cfg_.rc_end_usage = AOM_CBR;
   cfg_.rc_target_bitrate = 200;
   cfg_.kf_mode = AOM_KF_DISABLED;

   const int frame_count = 40;
   ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
                                        30, 1, 0, frame_count);

   // Here we check that the first dropped frame gets earlier and earlier
   // as the drop frame threshold is increased.

   const int kDropFrameThreshTestStep = 30;
   aom_codec_pts_t last_drop = frame_count;
   for (int i = 1; i < 91; i += kDropFrameThreshTestStep) {
     cfg_.rc_dropframe_thresh = i;
     ResetModel();
     ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
     ASSERT_LE(first_drop_, last_drop)
         << " The first dropped frame for drop_thresh " << i
         << " > first dropped frame for drop_thresh "
         << i - kDropFrameThreshTestStep;
     last_drop = first_drop_;
   }
 }

 class DatarateTestAV1Large
     : public ::libaom_test::EncoderTest,
       public ::libaom_test::CodecTestWith2Params<libaom_test::TestMode, int> {
  public:
   DatarateTestAV1Large() : EncoderTest(GET_PARAM(0)) {}

  protected:
   virtual ~DatarateTestAV1Large() {}

   virtual void SetUp() {
     InitializeConfig();
     SetMode(GET_PARAM(1));
     set_cpu_used_ = GET_PARAM(2);
     ResetModel();
   }

   virtual void ResetModel() {
     last_pts_ = 0;
     bits_in_buffer_model_ = cfg_.rc_target_bitrate * cfg_.rc_buf_initial_sz;
     frame_number_ = 0;
     tot_frame_number_ = 0;
     first_drop_ = 0;
     num_drops_ = 0;
     // Denoiser is off by default.
     denoiser_on_ = 0;
     bits_total_ = 0;
     denoiser_offon_test_ = 0;
     denoiser_offon_period_ = -1;
   }

   virtual void PreEncodeFrameHook(::libaom_test::VideoSource *video,
                                   ::libaom_test::Encoder *encoder) {
     if (video->frame() == 0) encoder->Control(AOME_SET_CPUUSED, set_cpu_used_);

     if (denoiser_offon_test_) {
       ASSERT_GT(denoiser_offon_period_, 0)
           << "denoiser_offon_period_ is not positive.";
       if ((video->frame() + 1) % denoiser_offon_period_ == 0) {
         // Flip denoiser_on_ periodically
         denoiser_on_ ^= 1;
       }
     }

     encoder->Control(AV1E_SET_NOISE_SENSITIVITY, denoiser_on_);

     const aom_rational_t tb = video->timebase();
     timebase_ = static_cast<double>(tb.num) / tb.den;
     duration_ = 0;
   }

   virtual void FramePktHook(const aom_codec_cx_pkt_t *pkt) {
     // Time since last timestamp = duration.
     aom_codec_pts_t duration = pkt->data.frame.pts - last_pts_;

     if (duration > 1) {
       // If first drop not set and we have a drop set it to this time.
       if (!first_drop_) first_drop_ = last_pts_ + 1;
       // Update the number of frame drops.
       num_drops_ += static_cast<int>(duration - 1);
       // Update counter for total number of frames (#frames input to encoder).
       tot_frame_number_ += static_cast<int>(duration - 1);
     }

     bits_in_buffer_model_ += static_cast<int64_t>(
         duration * timebase_ * cfg_.rc_target_bitrate * 1000);

     // Buffer should not go negative.
     ASSERT_GE(bits_in_buffer_model_, 0) << "Buffer Underrun at frame "
                                         << pkt->data.frame.pts;

     const size_t frame_size_in_bits = pkt->data.frame.sz * 8;

     // Update the total encoded bits.
     bits_total_ += frame_size_in_bits;

     // Update the most recent pts.
     last_pts_ = pkt->data.frame.pts;
     ++frame_number_;
     ++tot_frame_number_;
   }

   virtual void EndPassHook(void) {
     duration_ = (last_pts_ + 1) * timebase_;
     if (bits_total_) {
       // Effective file datarate:
       effective_datarate_ = (bits_total_ / 1000.0) / duration_;
     }
   }

   aom_codec_pts_t last_pts_;
   double timebase_;
   int frame_number_;      // Counter for number of non-dropped/encoded frames.
   int tot_frame_number_;  // Counter for total number of input frames.
   int64_t bits_total_;
   double duration_;
   double effective_datarate_;
   int set_cpu_used_;
   int64_t bits_in_buffer_model_;
   aom_codec_pts_t first_drop_;
   int num_drops_;
   int denoiser_on_;
   int denoiser_offon_test_;
   int denoiser_offon_period_;
 };

 // Check basic rate targeting,
 TEST_P(DatarateTestAV1Large, BasicRateTargeting) {
   cfg_.rc_buf_initial_sz = 500;
   cfg_.rc_buf_optimal_sz = 500;
   cfg_.rc_buf_sz = 1000;
   cfg_.rc_dropframe_thresh = 1;
   cfg_.rc_min_quantizer = 0;
   cfg_.rc_max_quantizer = 63;
   cfg_.rc_end_usage = AOM_CBR;
   cfg_.g_lag_in_frames = 0;

   ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
                                        30, 1, 0, 140);
   for (int i = 150; i < 800; i += 200) {
     cfg_.rc_target_bitrate = i;
     ResetModel();
     ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
     ASSERT_GE(effective_datarate_, cfg_.rc_target_bitrate * 0.85)
         << " The datarate for the file is lower than target by too much!";
     ASSERT_LE(effective_datarate_, cfg_.rc_target_bitrate * 1.15)
         << " The datarate for the file is greater than target by too much!";
   }
 }

 // Check basic rate targeting,
 TEST_P(DatarateTestAV1Large, BasicRateTargeting444) {
   ::libaom_test::Y4mVideoSource video("rush_hour_444.y4m", 0, 140);

   cfg_.g_profile = 1;
   cfg_.g_timebase = video.timebase();

   cfg_.rc_buf_initial_sz = 500;
   cfg_.rc_buf_optimal_sz = 500;
   cfg_.rc_buf_sz = 1000;
   cfg_.rc_dropframe_thresh = 1;
   cfg_.rc_min_quantizer = 0;
   cfg_.rc_max_quantizer = 63;
   cfg_.rc_end_usage = AOM_CBR;

   for (int i = 250; i < 900; i += 200) {
     cfg_.rc_target_bitrate = i;
     ResetModel();
     ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
     ASSERT_GE(static_cast<double>(cfg_.rc_target_bitrate),
               effective_datarate_ * 0.85)
         << " The datarate for the file exceeds the target by too much!";
     ASSERT_LE(static_cast<double>(cfg_.rc_target_bitrate),
               effective_datarate_ * 1.15)
         << " The datarate for the file missed the target!"
         << cfg_.rc_target_bitrate << " " << effective_datarate_;
   }
 }

 // Check that (1) the first dropped frame gets earlier and earlier
 // as the drop frame threshold is increased, and (2) that the total number of
 // frame drops does not decrease as we increase frame drop threshold.
 // Use a lower qp-max to force some frame drops.
 TEST_P(DatarateTestAV1Large, ChangingDropFrameThresh) {
   cfg_.rc_buf_initial_sz = 500;
   cfg_.rc_buf_optimal_sz = 500;
   cfg_.rc_buf_sz = 1000;
   cfg_.rc_undershoot_pct = 20;
   cfg_.rc_undershoot_pct = 20;
   cfg_.rc_dropframe_thresh = 10;
   cfg_.rc_min_quantizer = 0;
   cfg_.rc_max_quantizer = 50;
   cfg_.rc_end_usage = AOM_CBR;
   cfg_.rc_target_bitrate = 200;
   cfg_.g_lag_in_frames = 0;

   ::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
                                        30, 1, 0, 140);

   const int kDropFrameThreshTestStep = 30;
   aom_codec_pts_t last_drop = 140;
   int last_num_drops = 0;
   for (int i = 10; i < 100; i += kDropFrameThreshTestStep) {
     cfg_.rc_dropframe_thresh = i;
     ResetModel();
     ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
     ASSERT_GE(effective_datarate_, cfg_.rc_target_bitrate * 0.85)
         << " The datarate for the file is lower than target by too much!";
     ASSERT_LE(effective_datarate_, cfg_.rc_target_bitrate * 1.15)
         << " The datarate for the file is greater than target by too much!";
     ASSERT_LE(first_drop_, last_drop)
         << " The first dropped frame for drop_thresh " << i
         << " > first dropped frame for drop_thresh "
         << i - kDropFrameThreshTestStep;
     ASSERT_GE(num_drops_, last_num_drops * 0.85)
         << " The number of dropped frames for drop_thresh " << i
         << " < number of dropped frames for drop_thresh "
         << i - kDropFrameThreshTestStep;
     last_drop = first_drop_;
     last_num_drops = num_drops_;
   }
 }

 AV1_INSTANTIATE_TEST_CASE(DatarateTestAV1Large,
                           ::testing::Values(::libaom_test::kOnePassGood,
                                             ::libaom_test::kRealTime),
                           ::testing::Range(2, 7));

 }  // namespace
	/*
	* Copyright (c) 2016, Alliance for Open Media. All rights reserved
	*
	* This source code is subject to the terms of the BSD 2 Clause License and
	* the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License
	* was not distributed with this source code in the LICENSE file, you can
	* obtain it at www.aomedia.org/license/software. If the Alliance for Open
	* Media Patent License 1.0 was not distributed with this source code in the
	* PATENTS file, you can obtain it at www.aomedia.org/license/patent.
	*/

	#include "./aom_config.h"
	#include "third_party/googletest/src/include/gtest/gtest.h"
	#include "test/codec_factory.h"
	#include "test/encode_test_driver.h"
	#include "test/i420_video_source.h"
	#include "test/util.h"
	#include "test/y4m_video_source.h"
	#include "aom/aom_codec.h"

	namespace {

	class DatarateTestLarge
	: public ::libaom_test::EncoderTest,
	public ::libaom_test::CodecTestWithParam<libaom_test::TestMode> {
	public:
	DatarateTestLarge() : EncoderTest(GET_PARAM(0)) {}

	virtual ~DatarateTestLarge() {}

	protected:
	virtual void SetUp() {
	InitializeConfig();
	SetMode(GET_PARAM(1));
	ResetModel();
	}

	virtual void ResetModel() {
	last_pts_ = 0;
	bits_in_buffer_model_ = cfg_.rc_target_bitrate * cfg_.rc_buf_initial_sz;
	frame_number_ = 0;
	first_drop_ = 0;
	bits_total_ = 0;
	duration_ = 0.0;
	denoiser_offon_test_ = 0;
	denoiser_offon_period_ = -1;
	}

	virtual void PreEncodeFrameHook(::libaom_test::VideoSource *video,
	::libaom_test::Encoder *encoder) {
	if (video->frame() == 0)
	encoder->Control(AOME_SET_NOISE_SENSITIVITY, denoiser_on_);

	if (denoiser_offon_test_) {
	ASSERT_GT(denoiser_offon_period_, 0)
	<< "denoiser_offon_period_ is not positive.";
	if ((video->frame() + 1) % denoiser_offon_period_ == 0) {
	// Flip denoiser_on_ periodically
	denoiser_on_ ^= 1;
	}
	encoder->Control(AOME_SET_NOISE_SENSITIVITY, denoiser_on_);
	}

	const aom_rational_t tb = video->timebase();
	timebase_ = static_cast<double>(tb.num) / tb.den;
	duration_ = 0;
	}

	virtual void FramePktHook(const aom_codec_cx_pkt_t *pkt) {
	// Time since last timestamp = duration.
	aom_codec_pts_t duration = pkt->data.frame.pts - last_pts_;

	// TODO(jimbankoski): Remove these lines when the issue:
	// http://code.google.com/p/webm/issues/detail?id=496 is fixed.
	// For now the codec assumes buffer starts at starting buffer rate
	// plus one frame's time.
	if (last_pts_ == 0) duration = 1;

	// Add to the buffer the bits we'd expect from a constant bitrate server.
	bits_in_buffer_model_ += static_cast<int64_t>(
	duration * timebase_ * cfg_.rc_target_bitrate * 1000);

	/* Test the buffer model here before subtracting the frame. Do so because
	* the way the leaky bucket model works in libaom is to allow the buffer to
	* empty - and then stop showing frames until we've got enough bits to
	* show one. As noted in comment below (issue 495), this does not currently
	* apply to key frames. For now exclude key frames in condition below. */
	const bool key_frame =
	(pkt->data.frame.flags & AOM_FRAME_IS_KEY) ? true : false;
	if (!key_frame) {
	ASSERT_GE(bits_in_buffer_model_, 0) << "Buffer Underrun at frame "
	<< pkt->data.frame.pts;
	}

	const size_t frame_size_in_bits = pkt->data.frame.sz * 8;

	// Subtract from the buffer the bits associated with a played back frame.
	bits_in_buffer_model_ -= frame_size_in_bits;

	// Update the running total of bits for end of test datarate checks.
	bits_total_ += frame_size_in_bits;

	// If first drop not set and we have a drop set it to this time.
	if (!first_drop_ && duration > 1) first_drop_ = last_pts_ + 1;

	// Update the most recent pts.
	last_pts_ = pkt->data.frame.pts;

	// We update this so that we can calculate the datarate minus the last
	// frame encoded in the file.
	bits_in_last_frame_ = frame_size_in_bits;

	++frame_number_;
	}

	virtual void EndPassHook(void) {
	if (bits_total_) {
	const double file_size_in_kb = bits_total_ / 1000.; // bits per kilobit

	duration_ = (last_pts_ + 1) * timebase_;

	// Effective file datarate includes the time spent prebuffering.
	effective_datarate_ = (bits_total_ - bits_in_last_frame_) / 1000.0 /
	(cfg_.rc_buf_initial_sz / 1000.0 + duration_);

	file_datarate_ = file_size_in_kb / duration_;
	}
	}

	aom_codec_pts_t last_pts_;
	int64_t bits_in_buffer_model_;
	double timebase_;
	int frame_number_;
	aom_codec_pts_t first_drop_;
	int64_t bits_total_;
	double duration_;
	double file_datarate_;
	double effective_datarate_;
	size_t bits_in_last_frame_;
	int denoiser_on_;
	int denoiser_offon_test_;
	int denoiser_offon_period_;
	};

	#if CONFIG_TEMPORAL_DENOISING
	// Check basic datarate targeting, for a single bitrate, but loop over the
	// various denoiser settings.
	TEST_P(DatarateTestLarge, DenoiserLevels) {
	cfg_.rc_buf_initial_sz = 500;
	cfg_.rc_dropframe_thresh = 1;
	cfg_.rc_max_quantizer = 56;
	cfg_.rc_end_usage = AOM_CBR;
	::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
	30, 1, 0, 140);
	for (int j = 1; j < 5; ++j) {
	// Run over the denoiser levels.
	// For the temporal denoiser (#if CONFIG_TEMPORAL_DENOISING) the level j
	// refers to the 4 denoiser modes: denoiserYonly, denoiserOnYUV,
	// denoiserOnAggressive, and denoiserOnAdaptive.
	// For the spatial denoiser (if !CONFIG_TEMPORAL_DENOISING), the level j
	// refers to the blur thresholds: 20, 40, 60 80.
	// The j = 0 case (denoiser off) is covered in the tests below.
	denoiser_on_ = j;
	cfg_.rc_target_bitrate = 300;
	ResetModel();
	ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
	ASSERT_GE(cfg_.rc_target_bitrate, effective_datarate_ * 0.95)
	<< " The datarate for the file exceeds the target!";

	ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.3)
	<< " The datarate for the file missed the target!";
	}
	}

	// Check basic datarate targeting, for a single bitrate, when denoiser is off
	// and on.
	TEST_P(DatarateTestLarge, DenoiserOffOn) {
	cfg_.rc_buf_initial_sz = 500;
	cfg_.rc_dropframe_thresh = 1;
	cfg_.rc_max_quantizer = 56;
	cfg_.rc_end_usage = AOM_CBR;
	::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
	30, 1, 0, 299);
	cfg_.rc_target_bitrate = 300;
	ResetModel();
	// The denoiser is off by default.
	denoiser_on_ = 0;
	// Set the offon test flag.
	denoiser_offon_test_ = 1;
	denoiser_offon_period_ = 100;
	ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
	ASSERT_GE(cfg_.rc_target_bitrate, effective_datarate_ * 0.95)
	<< " The datarate for the file exceeds the target!";
	ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.3)
	<< " The datarate for the file missed the target!";
	}
	#endif // CONFIG_TEMPORAL_DENOISING

	TEST_P(DatarateTestLarge, BasicBufferModel) {
	denoiser_on_ = 0;
	cfg_.rc_buf_initial_sz = 500;
	cfg_.rc_dropframe_thresh = 1;
	cfg_.rc_max_quantizer = 56;
	cfg_.rc_end_usage = AOM_CBR;
	// 2 pass cbr datarate control has a bug hidden by the small # of
	// frames selected in this encode. The problem is that even if the buffer is
	// negative we produce a keyframe on a cutscene. Ignoring datarate
	// constraints
	// TODO(jimbankoski): ( Fix when issue
	// http://code.google.com/p/webm/issues/detail?id=495 is addressed. )
	::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
	30, 1, 0, 140);

	// There is an issue for low bitrates in real-time mode, where the
	// effective_datarate slightly overshoots the target bitrate.
	// This is same the issue as noted about (#495).
	// TODO(jimbankoski/marpan): Update test to run for lower bitrates (< 100),
	// when the issue is resolved.
	for (int i = 100; i < 800; i += 200) {
	cfg_.rc_target_bitrate = i;
	ResetModel();
	ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
	ASSERT_GE(cfg_.rc_target_bitrate, effective_datarate_ * 0.95)
	<< " The datarate for the file exceeds the target!";

	ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.3)
	<< " The datarate for the file missed the target!";
	}
	}

	TEST_P(DatarateTestLarge, ChangingDropFrameThresh) {
	denoiser_on_ = 0;
	cfg_.rc_buf_initial_sz = 500;
	cfg_.rc_max_quantizer = 36;
	cfg_.rc_end_usage = AOM_CBR;
	cfg_.rc_target_bitrate = 200;
	cfg_.kf_mode = AOM_KF_DISABLED;

	const int frame_count = 40;
	::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
	30, 1, 0, frame_count);

	// Here we check that the first dropped frame gets earlier and earlier
	// as the drop frame threshold is increased.

	const int kDropFrameThreshTestStep = 30;
	aom_codec_pts_t last_drop = frame_count;
	for (int i = 1; i < 91; i += kDropFrameThreshTestStep) {
	cfg_.rc_dropframe_thresh = i;
	ResetModel();
	ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
	ASSERT_LE(first_drop_, last_drop)
	<< " The first dropped frame for drop_thresh " << i
	<< " > first dropped frame for drop_thresh "
	<< i - kDropFrameThreshTestStep;
	last_drop = first_drop_;
	}
	}

	class DatarateTestAV1Large
	: public ::libaom_test::EncoderTest,
	public ::libaom_test::CodecTestWith2Params<libaom_test::TestMode, int> {
	public:
	DatarateTestAV1Large() : EncoderTest(GET_PARAM(0)) {}

	protected:
	virtual ~DatarateTestAV1Large() {}

	virtual void SetUp() {
	InitializeConfig();
	SetMode(GET_PARAM(1));
	set_cpu_used_ = GET_PARAM(2);
	ResetModel();
	}

	virtual void ResetModel() {
	last_pts_ = 0;
	bits_in_buffer_model_ = cfg_.rc_target_bitrate * cfg_.rc_buf_initial_sz;
	frame_number_ = 0;
	tot_frame_number_ = 0;
	first_drop_ = 0;
	num_drops_ = 0;
	// Denoiser is off by default.
	denoiser_on_ = 0;
	bits_total_ = 0;
	denoiser_offon_test_ = 0;
	denoiser_offon_period_ = -1;
	}

	virtual void PreEncodeFrameHook(::libaom_test::VideoSource *video,
	::libaom_test::Encoder *encoder) {
	if (video->frame() == 0) encoder->Control(AOME_SET_CPUUSED, set_cpu_used_);

	if (denoiser_offon_test_) {
	ASSERT_GT(denoiser_offon_period_, 0)
	<< "denoiser_offon_period_ is not positive.";
	if ((video->frame() + 1) % denoiser_offon_period_ == 0) {
	// Flip denoiser_on_ periodically
	denoiser_on_ ^= 1;
	}
	}

	encoder->Control(AV1E_SET_NOISE_SENSITIVITY, denoiser_on_);

	const aom_rational_t tb = video->timebase();
	timebase_ = static_cast<double>(tb.num) / tb.den;
	duration_ = 0;
	}

	virtual void FramePktHook(const aom_codec_cx_pkt_t *pkt) {
	// Time since last timestamp = duration.
	aom_codec_pts_t duration = pkt->data.frame.pts - last_pts_;

	if (duration > 1) {
	// If first drop not set and we have a drop set it to this time.
	if (!first_drop_) first_drop_ = last_pts_ + 1;
	// Update the number of frame drops.
	num_drops_ += static_cast<int>(duration - 1);
	// Update counter for total number of frames (#frames input to encoder).
	tot_frame_number_ += static_cast<int>(duration - 1);
	}

	bits_in_buffer_model_ += static_cast<int64_t>(
	duration * timebase_ * cfg_.rc_target_bitrate * 1000);

	// Buffer should not go negative.
	ASSERT_GE(bits_in_buffer_model_, 0) << "Buffer Underrun at frame "
	<< pkt->data.frame.pts;

	const size_t frame_size_in_bits = pkt->data.frame.sz * 8;

	// Update the total encoded bits.
	bits_total_ += frame_size_in_bits;

	// Update the most recent pts.
	last_pts_ = pkt->data.frame.pts;
	++frame_number_;
	++tot_frame_number_;
	}

	virtual void EndPassHook(void) {
	duration_ = (last_pts_ + 1) * timebase_;
	if (bits_total_) {
	// Effective file datarate:
	effective_datarate_ = (bits_total_ / 1000.0) / duration_;
	}
	}

	aom_codec_pts_t last_pts_;
	double timebase_;
	int frame_number_; // Counter for number of non-dropped/encoded frames.
	int tot_frame_number_; // Counter for total number of input frames.
	int64_t bits_total_;
	double duration_;
	double effective_datarate_;
	int set_cpu_used_;
	int64_t bits_in_buffer_model_;
	aom_codec_pts_t first_drop_;
	int num_drops_;
	int denoiser_on_;
	int denoiser_offon_test_;
	int denoiser_offon_period_;
	};

	// Check basic rate targeting,
	TEST_P(DatarateTestAV1Large, BasicRateTargeting) {
	cfg_.rc_buf_initial_sz = 500;
	cfg_.rc_buf_optimal_sz = 500;
	cfg_.rc_buf_sz = 1000;
	cfg_.rc_dropframe_thresh = 1;
	cfg_.rc_min_quantizer = 0;
	cfg_.rc_max_quantizer = 63;
	cfg_.rc_end_usage = AOM_CBR;
	cfg_.g_lag_in_frames = 0;

	::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
	30, 1, 0, 140);
	for (int i = 150; i < 800; i += 200) {
	cfg_.rc_target_bitrate = i;
	ResetModel();
	ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
	ASSERT_GE(effective_datarate_, cfg_.rc_target_bitrate * 0.85)
	<< " The datarate for the file is lower than target by too much!";
	ASSERT_LE(effective_datarate_, cfg_.rc_target_bitrate * 1.15)
	<< " The datarate for the file is greater than target by too much!";
	}
	}

	// Check basic rate targeting,
	TEST_P(DatarateTestAV1Large, BasicRateTargeting444) {
	::libaom_test::Y4mVideoSource video("rush_hour_444.y4m", 0, 140);

	cfg_.g_profile = 1;
	cfg_.g_timebase = video.timebase();

	cfg_.rc_buf_initial_sz = 500;
	cfg_.rc_buf_optimal_sz = 500;
	cfg_.rc_buf_sz = 1000;
	cfg_.rc_dropframe_thresh = 1;
	cfg_.rc_min_quantizer = 0;
	cfg_.rc_max_quantizer = 63;
	cfg_.rc_end_usage = AOM_CBR;

	for (int i = 250; i < 900; i += 200) {
	cfg_.rc_target_bitrate = i;
	ResetModel();
	ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
	ASSERT_GE(static_cast<double>(cfg_.rc_target_bitrate),
	effective_datarate_ * 0.85)
	<< " The datarate for the file exceeds the target by too much!";
	ASSERT_LE(static_cast<double>(cfg_.rc_target_bitrate),
	effective_datarate_ * 1.15)
	<< " The datarate for the file missed the target!"
	<< cfg_.rc_target_bitrate << " " << effective_datarate_;
	}
	}

	// Check that (1) the first dropped frame gets earlier and earlier
	// as the drop frame threshold is increased, and (2) that the total number of
	// frame drops does not decrease as we increase frame drop threshold.
	// Use a lower qp-max to force some frame drops.
	TEST_P(DatarateTestAV1Large, ChangingDropFrameThresh) {
	cfg_.rc_buf_initial_sz = 500;
	cfg_.rc_buf_optimal_sz = 500;
	cfg_.rc_buf_sz = 1000;
	cfg_.rc_undershoot_pct = 20;
	cfg_.rc_undershoot_pct = 20;
	cfg_.rc_dropframe_thresh = 10;
	cfg_.rc_min_quantizer = 0;
	cfg_.rc_max_quantizer = 50;
	cfg_.rc_end_usage = AOM_CBR;
	cfg_.rc_target_bitrate = 200;
	cfg_.g_lag_in_frames = 0;

	::libaom_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
	30, 1, 0, 140);

	const int kDropFrameThreshTestStep = 30;
	aom_codec_pts_t last_drop = 140;
	int last_num_drops = 0;
	for (int i = 10; i < 100; i += kDropFrameThreshTestStep) {
	cfg_.rc_dropframe_thresh = i;
	ResetModel();
	ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
	ASSERT_GE(effective_datarate_, cfg_.rc_target_bitrate * 0.85)
	<< " The datarate for the file is lower than target by too much!";
	ASSERT_LE(effective_datarate_, cfg_.rc_target_bitrate * 1.15)
	<< " The datarate for the file is greater than target by too much!";
	ASSERT_LE(first_drop_, last_drop)
	<< " The first dropped frame for drop_thresh " << i
	<< " > first dropped frame for drop_thresh "
	<< i - kDropFrameThreshTestStep;
	ASSERT_GE(num_drops_, last_num_drops * 0.85)
	<< " The number of dropped frames for drop_thresh " << i
	<< " < number of dropped frames for drop_thresh "
	<< i - kDropFrameThreshTestStep;
	last_drop = first_drop_;
	last_num_drops = num_drops_;
	}
	}

	AV1_INSTANTIATE_TEST_CASE(DatarateTestAV1Large,
	::testing::Values(::libaom_test::kOnePassGood,
	::libaom_test::kRealTime),
	::testing::Range(2, 7));

	} // namespace